Merge branch 'main' into update-eslint

Bumps [awalsh128/cache-apt-pkgs-action](https://github.com/awalsh128/cache-apt-pkgs-action) from 1.5.1 to 1.5.3.
- [Release notes](https://github.com/awalsh128/cache-apt-pkgs-action/releases)
- [Commits](https://github.com/awalsh128/cache-apt-pkgs-action/compare/v1.5.1...v1.5.3)

---
updated-dependencies:
- dependency-name: awalsh128/cache-apt-pkgs-action
  dependency-version: 1.5.3
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>

.github/CODEOWNERS

@@ -14,7 +14,7 @@
 /gui/src/i18n/ @ImUrX @Erimelowo
 /l10n.toml @ImUrX @Erimelowo
 
-/gui/src/components/settings/ @Erimelowo @ImUrX
+/gui/src/components/settings/ @Erimelowo @ImUrX @loucass003
 
 # Rust part of the GUI
 /gui/src-tauri/ @ImUrX

.github/workflows/build-gui.yml

@@ -21,7 +21,7 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
@@ -42,35 +42,46 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [ubuntu-22.04, windows-latest, macos-latest]
+        os:
+          [
+            ubuntu-22.04,
+            windows-latest,
+            macos-latest,
+            ubuntu-22.04-arm,
+            windows-11-arm,
+          ]
 
     runs-on: ${{ matrix.os }}
 
     env:
       # Don't mark warnings as errors
       CI: false
+      BUILD_ARCH: ${{ endsWith(matrix.os, 'arm') && 'aarch64' || 'amd64' }}
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
-      - if: matrix.os == 'ubuntu-22.04'
+      - if: startsWith(matrix.os, 'ubuntu')
         name: Set up Linux dependencies
-        uses: awalsh128/cache-apt-pkgs-action@latest
+        uses: awalsh128/cache-apt-pkgs-action@v1.5.3
         with:
           packages: libgtk-3-dev webkit2gtk-4.1 libappindicator3-dev librsvg2-dev patchelf
           # Increment to invalidate the cache
-          version: 1.0
+          version: ${{ format('v1.0-{0}', env.BUILD_ARCH) }}
           # Enables a workaround to attempt to run pre and post install scripts
           execute_install_scripts: true
           # Disables uploading logs as a build artifact
           debug: false
 
+      - if: matrix.os == 'windows-11-arm'
+        uses: actions-rust-lang/setup-rust-toolchain@v1
+        with:
+          cache: false
+
       - name: Cache cargo dependencies
         uses: Swatinem/rust-cache@v2
-        with:
-          shared-key: "${{ matrix.os }}"
 
       - uses: pnpm/action-setup@v4
       - name: Use Node.js
@@ -79,27 +90,32 @@ jobs:
           node-version-file: '.node-version'
           cache: 'pnpm'
 
+      - name: Install dependencies
+        shell: bash
+        run: pnpm i
+
       - name: Build
         shell: bash
-        run: |
-          pnpm i
-          pnpm run skipbundler --config $( ./gui/scripts/gitversion.mjs )
+        env:
+          SENTRY_AUTH_TOKEN: ${{ secrets.SENTRY_AUTH_TOKEN }}
+          NODE_OPTIONS: ${{ matrix.os == 'macos-latest' && '--max-old-space-size=4096' || '' }}
+        run: pnpm run skipbundler --config $( ./gui/scripts/gitversion.mjs )
 
-      - if: matrix.os == 'windows-latest'
+      - if: startsWith(matrix.os, 'windows')
         name: Upload a Build Artifact (Windows)
         uses: actions/upload-artifact@v4
         with:
           # Artifact name
-          name: SlimeVR-GUI-Windows
+          name: ${{ format('SlimeVR-GUI-Windows-{0}', env.BUILD_ARCH) }}
           # A file, directory or wildcard pattern that describes what to upload
           path: target/release/slimevr.exe
 
-      - if: matrix.os == 'ubuntu-22.04'
+      - if: startsWith(matrix.os, 'ubuntu')
         name: Upload a Build Artifact (Linux)
         uses: actions/upload-artifact@v4
         with:
           # Artifact name
-          name: SlimeVR-GUI-Linux
+          name: ${{ format('SlimeVR-GUI-Linux-{0}', env.BUILD_ARCH) }}
           # A file, directory or wildcard pattern that describes what to upload
           path: target/release/slimevr
 

.github/workflows/generate-update-manifest.yml

@@ -0,0 +1,34 @@
+# This workflow will build the update manifest for the updater and update a GitHub release
+
+name: Generate update manifest
+
+on:
+  workflow_dispatch:
+  release:
+    types: [released]
+
+jobs:
+  generate-manifest:
+    runs-on: ubuntu-22.04
+
+    steps:
+      - uses: actions/setup-node@v4
+        with:
+          node-version: '22.x'
+
+      - name: Generate update-manifest.json
+        run: |
+          npx @slimevr/update-manifest-generator@latest
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: "update-manifest.json"
+          path: ./update-manifest.json
+
+      - name: Upload update-manifest.json to release
+        uses: softprops/action-gh-release@v2
+        with:
+          tag_name: ${{ secrets.UPDATE_MANIFEST_RELEASE_TAG }}
+          files: ./update-manifest.json
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/gradle.yaml

@@ -19,7 +19,7 @@ jobs:
     runs-on: ${{ matrix.os }}
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
@@ -29,8 +29,8 @@ jobs:
       - name: Set up JDK 17
         uses: actions/setup-java@v4
         with:
-          java-version: "17"
-          distribution: "adopt"
+          java-version: '17'
+          distribution: 'adopt'
 
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@v4
@@ -44,12 +44,11 @@ jobs:
       - name: Test with Gradle
         run: ./gradlew test
 
-
   build:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
@@ -59,8 +58,8 @@ jobs:
       - name: Set up JDK 17
         uses: actions/setup-java@v4
         with:
-          java-version: "17"
-          distribution: "adopt"
+          java-version: '17'
+          distribution: 'adopt'
 
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@v4
@@ -72,7 +71,7 @@ jobs:
         uses: actions/upload-artifact@v4
         with:
           # Artifact name
-          name: "SlimeVR-Server" # optional, default is artifact
+          name: 'SlimeVR-Server' # optional, default is artifact
           # A file, directory or wildcard pattern that describes what to upload
           path: server/desktop/build/libs/slimevr.jar
 
@@ -85,11 +84,10 @@ jobs:
           files: |
             server/desktop/build/libs/slimevr.jar
 
-
   bundle-android:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
@@ -99,8 +97,8 @@ jobs:
       - name: Set up JDK 17
         uses: actions/setup-java@v4
         with:
-          java-version: "17"
-          distribution: "adopt"
+          java-version: '17'
+          distribution: 'adopt'
 
       - name: Setup Gradle
         uses: gradle/actions/setup-gradle@v4
@@ -112,10 +110,13 @@ jobs:
           node-version-file: '.node-version'
           cache: 'pnpm'
 
-      - name: Build GUI
-        run: |
-          pnpm i
-          cd gui && pnpm run build
+      - name: Install dependencies
+        run: pnpm i
+
+      - name: Build
+        env:
+          SENTRY_AUTH_TOKEN: ${{ secrets.SENTRY_AUTH_TOKEN }}
+        run: cd gui && pnpm run build
 
       - name: Build with Gradle
         run: ./gradlew :server:android:assembleDebug
@@ -124,7 +125,7 @@ jobs:
         uses: actions/upload-artifact@v4
         with:
           # Artifact name
-          name: "SlimeVR-Android" # optional, default is artifact
+          name: 'SlimeVR-Android' # optional, default is artifact
           # A file, directory or wildcard pattern that describes what to upload
           path: server/android/build/outputs/apk/*
 
@@ -142,28 +143,33 @@ jobs:
           files: |
             ./SlimeVR-android.apk
 
-
   bundle-linux:
-    runs-on: ubuntu-24.04
+    strategy:
+      matrix:
+        os: [ubuntu-latest, ubuntu-24.04-arm]
+    runs-on: ${{ matrix.os }}
     needs: [build, test]
     if: contains(fromJSON('["workflow_dispatch", "create"]'), github.event_name)
+
+    env:
+      BUILD_ARCH: ${{ endsWith(matrix.os, 'arm') && 'aarch64' || 'amd64' }}
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
-          name: "SlimeVR-Server"
+          name: 'SlimeVR-Server'
           path: server/desktop/build/libs/
 
       - name: Set up Linux dependencies
-        uses: awalsh128/cache-apt-pkgs-action@latest
+        uses: awalsh128/cache-apt-pkgs-action@v1.5.3
         with:
           packages: |
             build-essential curl wget file libssl-dev libgtk-3-dev libappindicator3-dev librsvg2-dev
           # Increment to invalidate the cache
-          version: 2.0
+          version: ${{ format('v1.0-{0}', env.BUILD_ARCH) }}
           # Enables a workaround to attempt to run pre and post install scripts
           execute_install_scripts: true
           # Disables uploading logs as a build artifact
@@ -181,8 +187,6 @@ jobs:
 
       - name: Cache cargo dependencies
         uses: Swatinem/rust-cache@v2
-        with:
-          shared-key: "ubuntu-22.04"
 
       - uses: pnpm/action-setup@v4
       - name: Use Node.js
@@ -191,41 +195,45 @@ jobs:
           node-version-file: '.node-version'
           cache: 'pnpm'
 
+      - name: Install dependencies
+        run: pnpm i
+
       - name: Build
-        run: |
-          pnpm i
-          pnpm run tauri build --config $( ./gui/scripts/gitversion.mjs )
+        env:
+          SENTRY_AUTH_TOKEN: ${{ secrets.SENTRY_AUTH_TOKEN }}
+        run: pnpm run tauri build --config $( ./gui/scripts/gitversion.mjs )
 
       - name: Make GUI tarball
         run: |
           tar czf slimevr-gui-dist.tar.gz -C gui/dist/ .
 
       - uses: actions/upload-artifact@v4
+        if: matrix.os == 'ubuntu-latest'
         with:
           name: SlimeVR-GUI-Dist
           path: ./slimevr-gui-dist.tar.gz
 
       - uses: actions/upload-artifact@v4
         with:
-          name: SlimeVR-GUI-Deb
+          name: ${{ format('SlimeVR-GUI-Deb-{0}', env.BUILD_ARCH) }}
           path: target/release/bundle/deb/slimevr*.deb
 
       - uses: actions/upload-artifact@v4
         with:
-          name: SlimeVR-GUI-AppImage
+          name: ${{ format('SlimeVR-GUI-AppImage-{0}', env.BUILD_ARCH) }}
           path: target/release/bundle/appimage/slimevr*.AppImage
 
       - uses: actions/upload-artifact@v4
         with:
-            name: SlimeVR-GUI-RPM
-            path: target/release/bundle/rpm/slimevr*.rpm
+          name: ${{ format('SlimeVR-GUI-RPM-{0}', env.BUILD_ARCH) }}
+          path: target/release/bundle/rpm/slimevr*.rpm
 
       - name: Prepare for release
         if: startsWith(github.ref, 'refs/tags/')
         run: |
-          cp target/release/bundle/appimage/slimevr*.AppImage ./SlimeVR-amd64.appimage
-          cp target/release/bundle/deb/slimevr*.deb ./SlimeVR-amd64.deb
-          cp target/release/bundle/rpm/slimevr*.rpm ./SlimeVR-amd64.rpm
+          cp target/release/bundle/appimage/slimevr*.AppImage "./SlimeVR-$BUILD_ARCH.appimage"
+          cp target/release/bundle/deb/slimevr*.deb "./SlimeVR-$BUILD_ARCH.deb"
+          cp target/release/bundle/rpm/slimevr*.rpm "./SlimeVR-$BUILD_ARCH.rpm"
 
       - name: Upload to draft release
         uses: softprops/action-gh-release@v2
@@ -235,29 +243,26 @@ jobs:
           generate_release_notes: true
           files: |
             ./slimevr-gui-dist.tar.gz
-            ./SlimeVR-amd64.appimage
-            ./SlimeVR-amd64.deb
-            ./SlimeVR-amd64.rpm
-
+            ./SlimeVR-*.appimage
+            ./SlimeVR-*.deb
+            ./SlimeVR-*.rpm
 
   bundle-mac:
     runs-on: macos-latest
     needs: [build, test]
     if: contains(fromJSON('["workflow_dispatch", "create"]'), github.event_name)
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
-          name: "SlimeVR-Server"
+          name: 'SlimeVR-Server'
           path: server/desktop/build/libs/
 
       - name: Cache cargo dependencies
         uses: Swatinem/rust-cache@v2
-        with:
-          shared-key: "macos-latest"
 
       - uses: pnpm/action-setup@v4
       - name: Use Node.js
@@ -266,11 +271,16 @@ jobs:
           node-version-file: '.node-version'
           cache: 'pnpm'
 
-      - name: Build
+      - name: Install dependencies
         run: |
           rustup target add x86_64-apple-darwin
           pnpm i
-          pnpm run tauri build --target universal-apple-darwin --config $( ./gui/scripts/gitversion.mjs )
+
+      - name: Build
+        env:
+          SENTRY_AUTH_TOKEN: ${{ secrets.SENTRY_AUTH_TOKEN }}
+          NODE_OPTIONS: --max-old-space-size=4096
+        run: pnpm run tauri build --target universal-apple-darwin --config $( ./gui/scripts/gitversion.mjs )
 
       - name: Modify Application
         run: |
@@ -311,25 +321,33 @@ jobs:
           files: |
             ./SlimeVR-mac.dmg
 
-
   bundle-windows:
-    runs-on: windows-latest
+    strategy:
+      matrix:
+        os: [windows-latest, windows-11-arm]
+    runs-on: ${{ matrix.os }}
     needs: [build, test]
     if: contains(fromJSON('["workflow_dispatch", "create"]'), github.event_name)
+
+    env:
+      BUILD_ARCH: ${{ endsWith(matrix.os, 'arm') && 'win-aarch64' || 'win64' }}
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
 
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v5
         with:
-          name: "SlimeVR-Server"
+          name: 'SlimeVR-Server'
           path: server/desktop/build/libs/
 
+      - if: matrix.os == 'windows-11-arm'
+        uses: actions-rust-lang/setup-rust-toolchain@v1
+        with:
+          cache: false
+
       - name: Cache cargo dependencies
         uses: Swatinem/rust-cache@v2
-        with:
-          shared-key: "windows-latest"
 
       - uses: pnpm/action-setup@v4
       - name: Use Node.js
@@ -338,11 +356,15 @@ jobs:
           node-version-file: '.node-version'
           cache: 'pnpm'
 
+      - name: Install dependencies
+        shell: bash
+        run: pnpm i
+
       - name: Build
         shell: bash
-        run: |
-          pnpm i
-          pnpm run skipbundler --config $( ./gui/scripts/gitversion.mjs )
+        env:
+          SENTRY_AUTH_TOKEN: ${{ secrets.SENTRY_AUTH_TOKEN }}
+        run: pnpm run skipbundler --config $( ./gui/scripts/gitversion.mjs )
 
       - name: Bundle to zips
         shell: bash
@@ -352,11 +374,11 @@ jobs:
           cp server/desktop/build/libs/slimevr.jar ./SlimeVR/slimevr.jar
           cp server/core/resources/* ./SlimeVR/
           cp target/release/slimevr.exe ./SlimeVR/
-          7z a -tzip SlimeVR-win64.zip ./SlimeVR/
+          7z a -tzip "SlimeVR-$BUILD_ARCH.zip" ./SlimeVR/
 
       - uses: actions/upload-artifact@v4
         with:
-          name: SlimeVR-GUI-Windows
+          name: ${{ format('SlimeVR-GUI-Windows-{0}', env.BUILD_ARCH) }}
           path: ./SlimeVR*.zip
 
       - name: Upload to draft release
@@ -365,4 +387,4 @@ jobs:
         with:
           draft: true
           generate_release_notes: true
-          files: ./SlimeVR-win64.zip
+          files: ./SlimeVR-*.zip

.github/workflows/pontoon-pr.yml

@@ -12,7 +12,7 @@ jobs:
       pull-requests: write
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           submodules: recursive
       - uses: repo-sync/pull-request@v2

.github/workflows/rebase.yml

@@ -15,7 +15,7 @@ jobs:
       contents: write
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
         with:
           ref: pontoon
           submodules: recursive

.node-version

@@ -1 +1 @@
-18.12.1
+22.17.0

CONTRIBUTING.md

@@ -105,6 +105,7 @@ When touching SolarXR:
 - After editing files, you should run `cd solarxr-protocol`, then either run
 `./generate-flatbuffer.ps1` (Windows) or `./generate-flatbuffer.sh` (Linux/OSX)
 - Make sure to commit your changes inside the submodule.
+- To make sure the gui use the latest generated code, run `pnpm i`.
 
 ## Code Licensing
 SlimeVR uses dual MIT and Apache-2.0 license. Be sure that any code that you reference,

README.md

@@ -47,6 +47,11 @@ on SlimeVR, you need to be aware of them:**
 Please refer to the [LICENSE-MIT] and [LICENSE-APACHE] files if you are at any point
 uncertain what the exact requirements are.
 
+## Trademark and Logo use
+**SlimeVR is a trademark or a registered trademark of SlimeVR B.V. Usage of SlimeVR software, hardware, or other intellectual property in this or other repositories does not grant you the right to use SlimeVR trademark as your own.**
+
+For more information, please refer to the [TRADEMARK].
+
 ## Contributions
 Any contributions submitted for inclusion in this repository will be dual-licensed under
 either:
@@ -64,3 +69,4 @@ okay with this and that you are authorized to provide the above licenses.
 
 [LICENSE-MIT]: LICENSE-MIT
 [LICENSE-APACHE]: LICENSE-APACHE
+[TRADEMARK]: TRADEMARK.md

TRADEMARK.md

@@ -0,0 +1,33 @@
+## SlimeVR is a trademark or a registered trademark of SlimeVR B.V.
+
+**Usage of SlimeVR software, hardware, or other intellectual property in this or other repositories does not grant you the right to use SlimeVR trademark as your own.**
+
+The purpose of a trademark is to remove uncertainty for users and customers regarding the product's manufacturer or endorsement. You're not allowed to market your product using SlimeVR name, and your usage of the name should be only factual and descriptive. For example, calling original SlimeVR products SlimeVR or describing compatibility of other products or derivatives. This applies to all products, including software, and hardware including non-official Full-Body Trackers.
+
+**Here are a few _acceptable_ uses of SlimeVR name when selling unofficial Slime trackers:**
+* SlimeVR-compatible trackers
+* Unofficial SlimeVR trackers / Non-official SlimeVR trackers
+* DIY SlimeVR trackers
+* Third-party SlimeVR Trackers
+* Custom SlimeVR-compatible trackers
+* < Your Brand > Slime Trackers
+* Using "SlimeVR" as a search tag
+
+**_Unacceptable_ uses include, but are not limited to:**
+* SlimeVR store
+* Buy SlimeVR
+* SlimeVR Trackers
+* Original SlimeVR
+* Official SlimeVR
+* SlimeVR BMI270 (or any other IMU model along with SlimeVR name)
+* < Your brand > SlimeVR / < your brand > SlimeVR Trackers
+
+Use of the SlimeVR name that can cause confusion is not allowed in any part of the listing, including, but not limited to: product title, product description, product metadata, site title, site name, site metadata, site texts, social media posts, or other advertisement.
+
+Also, please ensure you use the correct spelling and capitalization: only **"SlimeVR" is acceptable**. Not "Slimevr", "slimevr", or "Slime VR". You're allowed to use the word "slime" as you wish, it's not a trademark.
+
+Please understand that we have an obligation to reduce confusion for the customers, and we believe that our usage terms are generous compared to many other companies and products. This applies to all sellers or derivative products, we do not make exceptions.
+
+---
+
+If you have any questions about SlimeVR trademark or copyrighted materials, you can reach out to us at *tm[at]slimevr.dev*.

flake.lock

@@ -2,14 +2,15 @@
   "nodes": {
     "cachix": {
       "inputs": {
-        "devenv": "devenv_2",
+        "devenv": [
+          "devenv"
+        ],
         "flake-compat": [
-          "devenv",
-          "flake-compat"
+          "devenv"
         ],
         "git-hooks": [
           "devenv",
-          "pre-commit-hooks"
+          "git-hooks"
         ],
         "nixpkgs": [
           "devenv",
@@ -17,51 +18,16 @@
         ]
       },
       "locked": {
-        "lastModified": 1726520618,
-        "narHash": "sha256-jOsaBmJ/EtX5t/vbylCdS7pWYcKGmWOKg4QKUzKr6dA=",
+        "lastModified": 1748883665,
+        "narHash": "sha256-R0W7uAg+BLoHjMRMQ8+oiSbTq8nkGz5RDpQ+ZfxxP3A=",
         "owner": "cachix",
         "repo": "cachix",
-        "rev": "695525f9086542dfb09fde0871dbf4174abbf634",
-        "type": "github"
-      },
-      "original": {
-        "owner": "cachix",
-        "repo": "cachix",
-        "type": "github"
-      }
-    },
-    "cachix_2": {
-      "inputs": {
-        "devenv": "devenv_3",
-        "flake-compat": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "flake-compat"
-        ],
-        "nixpkgs": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "nixpkgs"
-        ],
-        "pre-commit-hooks": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "pre-commit-hooks"
-        ]
-      },
-      "locked": {
-        "lastModified": 1712055811,
-        "narHash": "sha256-7FcfMm5A/f02yyzuavJe06zLa9hcMHsagE28ADcmQvk=",
-        "owner": "cachix",
-        "repo": "cachix",
-        "rev": "02e38da89851ec7fec3356a5c04bc8349cae0e30",
+        "rev": "f707778d902af4d62d8dd92c269f8e70de09acbe",
         "type": "github"
       },
       "original": {
         "owner": "cachix",
+        "ref": "latest",
         "repo": "cachix",
         "type": "github"
       }
@@ -69,92 +35,23 @@
     "devenv": {
       "inputs": {
         "cachix": "cachix",
-        "flake-compat": "flake-compat_2",
-        "nix": "nix_3",
-        "nixpkgs": [
-          "nixpkgs"
-        ],
-        "pre-commit-hooks": "pre-commit-hooks_2"
-      },
-      "locked": {
-        "lastModified": 1730213537,
-        "narHash": "sha256-bWoeNdFISbGK8M0Xw4edmManGCkJ1oNqbfNY0Hlv9Vc=",
-        "owner": "cachix",
-        "repo": "devenv",
-        "rev": "5c046eeafd13f7a2b9fc733f70ea17571b24410f",
-        "type": "github"
-      },
-      "original": {
-        "owner": "cachix",
-        "repo": "devenv",
-        "type": "github"
-      }
-    },
-    "devenv_2": {
-      "inputs": {
-        "cachix": "cachix_2",
-        "flake-compat": [
-          "devenv",
-          "cachix",
-          "flake-compat"
-        ],
-        "nix": "nix_2",
-        "nixpkgs": [
-          "devenv",
-          "cachix",
-          "nixpkgs"
-        ],
-        "pre-commit-hooks": [
-          "devenv",
-          "cachix",
-          "git-hooks"
-        ]
-      },
-      "locked": {
-        "lastModified": 1723156315,
-        "narHash": "sha256-0JrfahRMJ37Rf1i0iOOn+8Z4CLvbcGNwa2ChOAVrp/8=",
-        "owner": "cachix",
-        "repo": "devenv",
-        "rev": "ff5eb4f2accbcda963af67f1a1159e3f6c7f5f91",
-        "type": "github"
-      },
-      "original": {
-        "owner": "cachix",
-        "repo": "devenv",
-        "type": "github"
-      }
-    },
-    "devenv_3": {
-      "inputs": {
-        "flake-compat": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "cachix",
-          "flake-compat"
-        ],
+        "flake-compat": "flake-compat",
+        "git-hooks": "git-hooks",
         "nix": "nix",
-        "nixpkgs": "nixpkgs",
-        "poetry2nix": "poetry2nix",
-        "pre-commit-hooks": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "cachix",
-          "pre-commit-hooks"
+        "nixpkgs": [
+          "nixpkgs"
         ]
       },
       "locked": {
-        "lastModified": 1708704632,
-        "narHash": "sha256-w+dOIW60FKMaHI1q5714CSibk99JfYxm0CzTinYWr+Q=",
+        "lastModified": 1750800495,
+        "narHash": "sha256-wBTGFNCx3Gr3BkNkEoFrKx9+d7otSdQesCDCPGDKZHk=",
         "owner": "cachix",
         "repo": "devenv",
-        "rev": "2ee4450b0f4b95a1b90f2eb5ffea98b90e48c196",
+        "rev": "b33ab3610c084a7e3fabc5eefaeb437449f1efe7",
         "type": "github"
       },
       "original": {
         "owner": "cachix",
-        "ref": "python-rewrite",
         "repo": "devenv",
         "type": "github"
       }
@@ -167,11 +64,11 @@
         "rust-analyzer-src": "rust-analyzer-src"
       },
       "locked": {
-        "lastModified": 1730270567,
-        "narHash": "sha256-ZTBMwsY0i5zTT6rejotc9wqcSGkEgAeejXktJBo9Z5M=",
+        "lastModified": 1750833544,
+        "narHash": "sha256-e5W27mfPGiM35qr0DjTUzLHP4ET2MbvRc4HJHScw/ko=",
         "owner": "nix-community",
         "repo": "fenix",
-        "rev": "6535bb2a77a3bec73cc5b2d2ff63da8a479e32bd",
+        "rev": "c3940d9ff4d37e965e5841149367234c2aad1ab6",
         "type": "github"
       },
       "original": {
@@ -183,27 +80,11 @@
     "flake-compat": {
       "flake": false,
       "locked": {
-        "lastModified": 1673956053,
-        "narHash": "sha256-4gtG9iQuiKITOjNQQeQIpoIB6b16fm+504Ch3sNKLd8=",
+        "lastModified": 1747046372,
+        "narHash": "sha256-CIVLLkVgvHYbgI2UpXvIIBJ12HWgX+fjA8Xf8PUmqCY=",
         "owner": "edolstra",
         "repo": "flake-compat",
-        "rev": "35bb57c0c8d8b62bbfd284272c928ceb64ddbde9",
-        "type": "github"
-      },
-      "original": {
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "type": "github"
-      }
-    },
-    "flake-compat_2": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1696426674,
-        "narHash": "sha256-kvjfFW7WAETZlt09AgDn1MrtKzP7t90Vf7vypd3OL1U=",
-        "owner": "edolstra",
-        "repo": "flake-compat",
-        "rev": "0f9255e01c2351cc7d116c072cb317785dd33b33",
+        "rev": "9100a0f413b0c601e0533d1d94ffd501ce2e7885",
         "type": "github"
       },
       "original": {
@@ -221,11 +102,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1712014858,
-        "narHash": "sha256-sB4SWl2lX95bExY2gMFG5HIzvva5AVMJd4Igm+GpZNw=",
+        "lastModified": 1733312601,
+        "narHash": "sha256-4pDvzqnegAfRkPwO3wmwBhVi/Sye1mzps0zHWYnP88c=",
         "owner": "hercules-ci",
         "repo": "flake-parts",
-        "rev": "9126214d0a59633752a136528f5f3b9aa8565b7d",
+        "rev": "205b12d8b7cd4802fbcb8e8ef6a0f1408781a4f9",
         "type": "github"
       },
       "original": {
@@ -239,11 +120,11 @@
         "nixpkgs-lib": "nixpkgs-lib"
       },
       "locked": {
-        "lastModified": 1727826117,
-        "narHash": "sha256-K5ZLCyfO/Zj9mPFldf3iwS6oZStJcU4tSpiXTMYaaL0=",
+        "lastModified": 1749398372,
+        "narHash": "sha256-tYBdgS56eXYaWVW3fsnPQ/nFlgWi/Z2Ymhyu21zVM98=",
         "owner": "hercules-ci",
         "repo": "flake-parts",
-        "rev": "3d04084d54bedc3d6b8b736c70ef449225c361b1",
+        "rev": "9305fe4e5c2a6fcf5ba6a3ff155720fbe4076569",
         "type": "github"
       },
       "original": {
@@ -252,57 +133,6 @@
       }
     },
     "flake-utils": {
-      "inputs": {
-        "systems": "systems"
-      },
-      "locked": {
-        "lastModified": 1689068808,
-        "narHash": "sha256-6ixXo3wt24N/melDWjq70UuHQLxGV8jZvooRanIHXw0=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "919d646de7be200f3bf08cb76ae1f09402b6f9b4",
-        "type": "github"
-      },
-      "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "type": "github"
-      }
-    },
-    "flake-utils_2": {
-      "locked": {
-        "lastModified": 1667395993,
-        "narHash": "sha256-nuEHfE/LcWyuSWnS8t12N1wc105Qtau+/OdUAjtQ0rA=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "5aed5285a952e0b949eb3ba02c12fa4fcfef535f",
-        "type": "github"
-      },
-      "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "type": "github"
-      }
-    },
-    "flake-utils_3": {
-      "inputs": {
-        "systems": "systems_2"
-      },
-      "locked": {
-        "lastModified": 1710146030,
-        "narHash": "sha256-SZ5L6eA7HJ/nmkzGG7/ISclqe6oZdOZTNoesiInkXPQ=",
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "rev": "b1d9ab70662946ef0850d488da1c9019f3a9752a",
-        "type": "github"
-      },
-      "original": {
-        "owner": "numtide",
-        "repo": "flake-utils",
-        "type": "github"
-      }
-    },
-    "flake-utils_4": {
       "locked": {
         "lastModified": 1659877975,
         "narHash": "sha256-zllb8aq3YO3h8B/U0/J1WBgAL8EX5yWf5pMj3G0NAmc=",
@@ -317,17 +147,41 @@
         "type": "github"
       }
     },
+    "git-hooks": {
+      "inputs": {
+        "flake-compat": [
+          "devenv",
+          "flake-compat"
+        ],
+        "gitignore": "gitignore",
+        "nixpkgs": [
+          "devenv",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1749636823,
+        "owner": "cachix",
+        "repo": "git-hooks.nix",
+        "rev": "623c56286de5a3193aa38891a6991b28f9bab056",
+        "type": "github"
+      },
+      "original": {
+        "owner": "cachix",
+        "repo": "git-hooks.nix",
+        "type": "github"
+      }
+    },
     "gitignore": {
       "inputs": {
         "nixpkgs": [
           "devenv",
-          "pre-commit-hooks",
+          "git-hooks",
           "nixpkgs"
         ]
       },
       "locked": {
         "lastModified": 1709087332,
-        "narHash": "sha256-HG2cCnktfHsKV0s4XW83gU3F57gaTljL9KNSuG6bnQs=",
         "owner": "hercules-ci",
         "repo": "gitignore.nix",
         "rev": "637db329424fd7e46cf4185293b9cc8c88c95394",
@@ -339,22 +193,6 @@
         "type": "github"
       }
     },
-    "libgit2": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1697646580,
-        "narHash": "sha256-oX4Z3S9WtJlwvj0uH9HlYcWv+x1hqp8mhXl7HsLu2f0=",
-        "owner": "libgit2",
-        "repo": "libgit2",
-        "rev": "45fd9ed7ae1a9b74b957ef4f337bc3c8b3df01b5",
-        "type": "github"
-      },
-      "original": {
-        "owner": "libgit2",
-        "repo": "libgit2",
-        "type": "github"
-      }
-    },
     "mk-shell-bin": {
       "locked": {
         "lastModified": 1677004959,
@@ -371,142 +209,62 @@
       }
     },
     "nix": {
-      "inputs": {
-        "flake-compat": "flake-compat",
-        "nixpkgs": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "cachix",
-          "devenv",
-          "nixpkgs"
-        ],
-        "nixpkgs-regression": "nixpkgs-regression"
-      },
-      "locked": {
-        "lastModified": 1712911606,
-        "narHash": "sha256-BGvBhepCufsjcUkXnEEXhEVjwdJAwPglCC2+bInc794=",
-        "owner": "domenkozar",
-        "repo": "nix",
-        "rev": "b24a9318ea3f3600c1e24b4a00691ee912d4de12",
-        "type": "github"
-      },
-      "original": {
-        "owner": "domenkozar",
-        "ref": "devenv-2.21",
-        "repo": "nix",
-        "type": "github"
-      }
-    },
-    "nix-github-actions": {
-      "inputs": {
-        "nixpkgs": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "cachix",
-          "devenv",
-          "poetry2nix",
-          "nixpkgs"
-        ]
-      },
-      "locked": {
-        "lastModified": 1688870561,
-        "narHash": "sha256-4UYkifnPEw1nAzqqPOTL2MvWtm3sNGw1UTYTalkTcGY=",
-        "owner": "nix-community",
-        "repo": "nix-github-actions",
-        "rev": "165b1650b753316aa7f1787f3005a8d2da0f5301",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nix-community",
-        "repo": "nix-github-actions",
-        "type": "github"
-      }
-    },
-    "nix2container": {
-      "inputs": {
-        "flake-utils": "flake-utils_3",
-        "nixpkgs": [
-          "nixpkgs"
-        ]
-      },
-      "locked": {
-        "lastModified": 1729339656,
-        "narHash": "sha256-smV7HQ/OqZeRguQxNjsb3uQDwm0p6zKDbSDbPCav/oY=",
-        "owner": "nlewo",
-        "repo": "nix2container",
-        "rev": "cc96df7c3747c61c584d757cfc083922b4f4b33e",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nlewo",
-        "repo": "nix2container",
-        "type": "github"
-      }
-    },
-    "nix_2": {
-      "inputs": {
-        "flake-compat": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "flake-compat"
-        ],
-        "nixpkgs": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "nixpkgs"
-        ],
-        "nixpkgs-regression": "nixpkgs-regression_2"
-      },
-      "locked": {
-        "lastModified": 1712911606,
-        "narHash": "sha256-BGvBhepCufsjcUkXnEEXhEVjwdJAwPglCC2+bInc794=",
-        "owner": "domenkozar",
-        "repo": "nix",
-        "rev": "b24a9318ea3f3600c1e24b4a00691ee912d4de12",
-        "type": "github"
-      },
-      "original": {
-        "owner": "domenkozar",
-        "ref": "devenv-2.21",
-        "repo": "nix",
-        "type": "github"
-      }
-    },
-    "nix_3": {
       "inputs": {
         "flake-compat": [
           "devenv",
           "flake-compat"
         ],
         "flake-parts": "flake-parts",
-        "libgit2": "libgit2",
-        "nixpkgs": "nixpkgs_2",
-        "nixpkgs-23-11": "nixpkgs-23-11",
-        "nixpkgs-regression": "nixpkgs-regression_3",
-        "pre-commit-hooks": "pre-commit-hooks"
+        "git-hooks-nix": [
+          "devenv",
+          "git-hooks"
+        ],
+        "nixpkgs": "nixpkgs",
+        "nixpkgs-23-11": [
+          "devenv"
+        ],
+        "nixpkgs-regression": [
+          "devenv"
+        ]
       },
       "locked": {
-        "lastModified": 1727438425,
-        "narHash": "sha256-X8ES7I1cfNhR9oKp06F6ir4Np70WGZU5sfCOuNBEwMg=",
-        "owner": "domenkozar",
+        "lastModified": 1750117611,
+        "narHash": "sha256-LTwASICtyN3AjzlF9l2ZNAIVZqclio3yRcwwZy3QSJA=",
+        "owner": "cachix",
         "repo": "nix",
-        "rev": "f6c5ae4c1b2e411e6b1e6a8181cc84363d6a7546",
+        "rev": "9e4fc95c388e2223d47da865503dee20d179776a",
         "type": "github"
       },
       "original": {
-        "owner": "domenkozar",
-        "ref": "devenv-2.24",
+        "owner": "cachix",
+        "ref": "devenv-2.30",
         "repo": "nix",
         "type": "github"
       }
     },
+    "nix2container": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1749158376,
+        "narHash": "sha256-uirStFNxauh0lxzBowcp28X+Sq7JgsBIDnbwbAfZwf8=",
+        "owner": "nlewo",
+        "repo": "nix2container",
+        "rev": "0f8974c58755dba441df03598eefd1e1cd50e341",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nlewo",
+        "repo": "nix2container",
+        "type": "github"
+      }
+    },
     "nixgl": {
       "inputs": {
-        "flake-utils": "flake-utils_4",
+        "flake-utils": "flake-utils",
         "nixpkgs": [
           "nixpkgs"
         ]
@@ -527,135 +285,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1692808169,
-        "narHash": "sha256-x9Opq06rIiwdwGeK2Ykj69dNc2IvUH1fY55Wm7atwrE=",
+        "lastModified": 1747179050,
+        "narHash": "sha256-qhFMmDkeJX9KJwr5H32f1r7Prs7XbQWtO0h3V0a0rFY=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "9201b5ff357e781bf014d0330d18555695df7ba8",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "nixpkgs-unstable",
-        "repo": "nixpkgs",
-        "type": "github"
-      }
-    },
-    "nixpkgs-23-11": {
-      "locked": {
-        "lastModified": 1717159533,
-        "narHash": "sha256-oamiKNfr2MS6yH64rUn99mIZjc45nGJlj9eGth/3Xuw=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "a62e6edd6d5e1fa0329b8653c801147986f8d446",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "a62e6edd6d5e1fa0329b8653c801147986f8d446",
-        "type": "github"
-      }
-    },
-    "nixpkgs-lib": {
-      "locked": {
-        "lastModified": 1727825735,
-        "narHash": "sha256-0xHYkMkeLVQAMa7gvkddbPqpxph+hDzdu1XdGPJR+Os=",
-        "type": "tarball",
-        "url": "https://github.com/NixOS/nixpkgs/archive/fb192fec7cc7a4c26d51779e9bab07ce6fa5597a.tar.gz"
-      },
-      "original": {
-        "type": "tarball",
-        "url": "https://github.com/NixOS/nixpkgs/archive/fb192fec7cc7a4c26d51779e9bab07ce6fa5597a.tar.gz"
-      }
-    },
-    "nixpkgs-regression": {
-      "locked": {
-        "lastModified": 1643052045,
-        "narHash": "sha256-uGJ0VXIhWKGXxkeNnq4TvV3CIOkUJ3PAoLZ3HMzNVMw=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
-        "type": "github"
-      }
-    },
-    "nixpkgs-regression_2": {
-      "locked": {
-        "lastModified": 1643052045,
-        "narHash": "sha256-uGJ0VXIhWKGXxkeNnq4TvV3CIOkUJ3PAoLZ3HMzNVMw=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
-        "type": "github"
-      }
-    },
-    "nixpkgs-regression_3": {
-      "locked": {
-        "lastModified": 1643052045,
-        "narHash": "sha256-uGJ0VXIhWKGXxkeNnq4TvV3CIOkUJ3PAoLZ3HMzNVMw=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "215d4d0fd80ca5163643b03a33fde804a29cc1e2",
-        "type": "github"
-      }
-    },
-    "nixpkgs-stable": {
-      "locked": {
-        "lastModified": 1720386169,
-        "narHash": "sha256-NGKVY4PjzwAa4upkGtAMz1npHGoRzWotlSnVlqI40mo=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "194846768975b7ad2c4988bdb82572c00222c0d7",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "nixos-24.05",
-        "repo": "nixpkgs",
-        "type": "github"
-      }
-    },
-    "nixpkgs_2": {
-      "locked": {
-        "lastModified": 1717432640,
-        "narHash": "sha256-+f9c4/ZX5MWDOuB1rKoWj+lBNm0z0rs4CK47HBLxy1o=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "88269ab3044128b7c2f4c7d68448b2fb50456870",
-        "type": "github"
-      },
-      "original": {
-        "owner": "NixOS",
-        "ref": "release-24.05",
-        "repo": "nixpkgs",
-        "type": "github"
-      }
-    },
-    "nixpkgs_3": {
-      "locked": {
-        "lastModified": 1729880355,
-        "narHash": "sha256-RP+OQ6koQQLX5nw0NmcDrzvGL8HDLnyXt/jHhL1jwjM=",
-        "owner": "NixOS",
-        "repo": "nixpkgs",
-        "rev": "18536bf04cd71abd345f9579158841376fdd0c5a",
+        "rev": "adaa24fbf46737f3f1b5497bf64bae750f82942e",
         "type": "github"
       },
       "original": {
@@ -665,93 +299,34 @@
         "type": "github"
       }
     },
-    "poetry2nix": {
-      "inputs": {
-        "flake-utils": "flake-utils",
-        "nix-github-actions": "nix-github-actions",
-        "nixpkgs": [
-          "devenv",
-          "cachix",
-          "devenv",
-          "cachix",
-          "devenv",
-          "nixpkgs"
-        ]
-      },
+    "nixpkgs-lib": {
       "locked": {
-        "lastModified": 1692876271,
-        "narHash": "sha256-IXfZEkI0Mal5y1jr6IRWMqK8GW2/f28xJenZIPQqkY0=",
+        "lastModified": 1748740939,
+        "narHash": "sha256-rQaysilft1aVMwF14xIdGS3sj1yHlI6oKQNBRTF40cc=",
         "owner": "nix-community",
-        "repo": "poetry2nix",
-        "rev": "d5006be9c2c2417dafb2e2e5034d83fabd207ee3",
+        "repo": "nixpkgs.lib",
+        "rev": "656a64127e9d791a334452c6b6606d17539476e2",
         "type": "github"
       },
       "original": {
         "owner": "nix-community",
-        "repo": "poetry2nix",
+        "repo": "nixpkgs.lib",
         "type": "github"
       }
     },
-    "pre-commit-hooks": {
-      "inputs": {
-        "flake-compat": [
-          "devenv",
-          "nix"
-        ],
-        "flake-utils": "flake-utils_2",
-        "gitignore": [
-          "devenv",
-          "nix"
-        ],
-        "nixpkgs": [
-          "devenv",
-          "nix",
-          "nixpkgs"
-        ],
-        "nixpkgs-stable": [
-          "devenv",
-          "nix",
-          "nixpkgs"
-        ]
-      },
+    "nixpkgs_2": {
       "locked": {
-        "lastModified": 1712897695,
-        "narHash": "sha256-nMirxrGteNAl9sWiOhoN5tIHyjBbVi5e2tgZUgZlK3Y=",
-        "owner": "cachix",
-        "repo": "pre-commit-hooks.nix",
-        "rev": "40e6053ecb65fcbf12863338a6dcefb3f55f1bf8",
+        "lastModified": 1750741721,
+        "narHash": "sha256-Z0djmTa1YmnGMfE9jEe05oO4zggjDmxOGKwt844bUhE=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "4b1164c3215f018c4442463a27689d973cffd750",
         "type": "github"
       },
       "original": {
-        "owner": "cachix",
-        "repo": "pre-commit-hooks.nix",
-        "type": "github"
-      }
-    },
-    "pre-commit-hooks_2": {
-      "inputs": {
-        "flake-compat": [
-          "devenv",
-          "flake-compat"
-        ],
-        "gitignore": "gitignore",
-        "nixpkgs": [
-          "devenv",
-          "nixpkgs"
-        ],
-        "nixpkgs-stable": "nixpkgs-stable"
-      },
-      "locked": {
-        "lastModified": 1726745158,
-        "narHash": "sha256-D5AegvGoEjt4rkKedmxlSEmC+nNLMBPWFxvmYnVLhjk=",
-        "owner": "cachix",
-        "repo": "pre-commit-hooks.nix",
-        "rev": "4e743a6920eab45e8ba0fbe49dc459f1423a4b74",
-        "type": "github"
-      },
-      "original": {
-        "owner": "cachix",
-        "repo": "pre-commit-hooks.nix",
+        "owner": "NixOS",
+        "ref": "nixos-unstable",
+        "repo": "nixpkgs",
         "type": "github"
       }
     },
@@ -763,17 +338,17 @@
         "mk-shell-bin": "mk-shell-bin",
         "nix2container": "nix2container",
         "nixgl": "nixgl",
-        "nixpkgs": "nixpkgs_3"
+        "nixpkgs": "nixpkgs_2"
       }
     },
     "rust-analyzer-src": {
       "flake": false,
       "locked": {
-        "lastModified": 1730197931,
-        "narHash": "sha256-MjYc80pHGrD6TYMHHpXniCW0egVyHiDR23xAh7MN7Ww=",
+        "lastModified": 1750788942,
+        "narHash": "sha256-bBSdUlEw/7xh66rtMEDg39xQUNN2VaDJIbRPIwhpFYk=",
         "owner": "rust-lang",
         "repo": "rust-analyzer",
-        "rev": "468b5cd43023d9771996b06ab7215997895a6059",
+        "rev": "c68c8a81a7d2979778ae1e8ba024beacb4fff6b6",
         "type": "github"
       },
       "original": {
@@ -782,36 +357,6 @@
         "repo": "rust-analyzer",
         "type": "github"
       }
-    },
-    "systems": {
-      "locked": {
-        "lastModified": 1681028828,
-        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
-        "owner": "nix-systems",
-        "repo": "default",
-        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nix-systems",
-        "repo": "default",
-        "type": "github"
-      }
-    },
-    "systems_2": {
-      "locked": {
-        "lastModified": 1681028828,
-        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
-        "owner": "nix-systems",
-        "repo": "default",
-        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
-        "type": "github"
-      },
-      "original": {
-        "owner": "nix-systems",
-        "repo": "default",
-        "type": "github"
-      }
     }
   },
   "root": "root",

flake.nix

@@ -78,7 +78,6 @@
               cacert
             ])
             ++ lib.optionals pkgs.stdenv.isLinux (with pkgs; [
-              appimagekit
               atk
               cairo
               dbus
@@ -122,13 +121,15 @@
           languages.javascript = {
             enable = true;
             corepack.enable = true;
+            pnpm.enable = true;
+            npm.enable = true;
           };
 
           languages.rust = {
             enable = true;
             toolchain = fenixpkgs.fromToolchainName {
               name = rust_toolchain.toolchain.channel;
-              sha256 = "sha256-VZZnlyP69+Y3crrLHQyJirqlHrTtGTsyiSnZB8jEvVo=";
+              sha256 = "sha256-yMuSb5eQPO/bHv+Bcf/US8LVMbf/G/0MSfiPwBhiPpk=";
             };
             components = rust_toolchain.toolchain.components;
           };
@@ -140,7 +141,7 @@
           enterShell = with pkgs; ''
             # Export a LD_LIBRARY_PATH without libudev-zero as libgudev not likey
             export SLIMEVR_RUST_LD_LIBRARY_PATH="$LD_LIBRARY_PATH"
-            export LD_LIBRARY_PATH="${libudev-zero}/lib:$LD_LIBRARY_PATH"
+            export LD_LIBRARY_PATH="${libudev-zero}/lib:${libayatana-appindicator}/lib:$LD_LIBRARY_PATH"
             # GStreamer plugins won't be found without this
             export GST_PLUGIN_SYSTEM_PATH_1_0="${pkgs.gst_all_1.gstreamer.out}/lib/gstreamer-1.0:${pkgs.gst_all_1.gst-plugins-base}/lib/gstreamer-1.0:${pkgs.gst_all_1.gst-plugins-good}/lib/gstreamer-1.0:${pkgs.gst_all_1.gst-plugins-bad}/lib/gstreamer-1.0"
           '';

gradle.properties

@@ -14,7 +14,7 @@ android.nonTransitiveRClass=true
 org.gradle.unsafe.configuration-cache=false
 
 kotlinVersion=2.0.20
-spotlessVersion=6.25.0
+spotlessVersion=7.0.2
 shadowJarVersion=8.3.2
 buildconfigVersion=5.5.0
 grgitVersion=5.2.2

gui/.gitignore

@@ -32,3 +32,6 @@ vite.config.ts.timestamp*
 
 # eslint
 .eslintcache
+
+# Sentry Config File
+.env.sentry-build-plugin

gui/.lintstagedrc.mjs

@@ -1,5 +1,5 @@
 export default {
   '**/*.{ts,tsx}': () => 'tsc -p tsconfig.json --noEmit',
   'src/**/*.{js,jsx,ts,tsx}': 'eslint --max-warnings=0 --no-warn-ignored --cache --fix',
-  '**/*.{js,jsx,ts,tsx,css,md,json}': 'prettier --write',
+  '**/*.{js,jsx,ts,tsx,css,scss,md,json}': 'prettier --write',
 };

gui/eslint.config.js

@@ -1,28 +1,74 @@
-import { FlatCompat } from '@eslint/eslintrc';
-import eslint from '@eslint/js';
 import globals from 'globals';
 import tseslint from 'typescript-eslint';
+import js from '@eslint/js';
+import importAlias from '@dword-design/eslint-plugin-import-alias';
+import { configs, plugins } from 'eslint-config-airbnb-extended';
+import { rules as prettierConfigRules } from 'eslint-config-prettier';
+import prettierPlugin from 'eslint-plugin-prettier';
 
-const compat = new FlatCompat();
+const jsConfig = [
+  // ESLint Recommended Rules
+  {
+    name: 'js/config',
+    ...js.configs.recommended,
+  },
+  // Stylistic Plugin
+  plugins.stylistic,
+  // Import X Plugin
+  plugins.importX,
+  // Airbnb Base Recommended Config
+  ...configs.base.recommended,
+];
+
+const reactConfig = [
+  // React Plugin
+  plugins.react,
+  // React Hooks Plugin
+  plugins.reactHooks,
+  // React JSX A11y Plugin
+  plugins.reactA11y,
+  // Airbnb React Recommended Config
+  ...configs.react.recommended,
+];
+
+const typescriptConfig = [
+  // TypeScript ESLint Plugin
+  plugins.typescriptEslint,
+  // Airbnb Base TypeScript Config
+  ...configs.base.typescript,
+  // Airbnb React TypeScript Config
+  ...configs.react.typescript,
+];
+
+const prettierConfig = [
+  // Prettier Plugin
+  {
+    name: 'prettier/plugin/config',
+    plugins: {
+      prettier: prettierPlugin,
+    },
+  },
+  // Prettier Config
+  {
+    name: 'prettier/config',
+    rules: {
+      ...prettierConfigRules,
+      // remove errors with prettier, use prettier for that pls
+      // 'prettier/prettier': 'error',
+    },
+  },
+];
 
 export const gui = [
-  eslint.configs.recommended,
-  ...tseslint.configs.recommended,
-  ...compat.extends('plugin:@dword-design/import-alias/recommended'),
-  ...compat.plugins('eslint-plugin-react-hooks'),
-  // Add import-alias rule inside compat because plugin doesn't like flat configs
-  ...compat.config({
-    rules: {
-      '@dword-design/import-alias/prefer-alias': [
-        'error',
-        {
-          alias: {
-            '@': './src/',
-          },
-        },
-      ],
-    },
-  }),
+  // Javascript Config
+  ...jsConfig,
+  // React Config
+  ...reactConfig,
+  // TypeScript Config
+  ...typescriptConfig,
+  // Prettier Config
+  ...prettierConfig,
+  importAlias.configs.recommended,
   {
     languageOptions: {
       ecmaVersion: 'latest',
@@ -39,10 +85,52 @@ export const gui = [
       },
     },
     files: ['src/**/*.{js,jsx,ts,tsx,json}'],
-    plugins: {
-      '@typescript-eslint': tseslint.plugin,
-    },
     rules: {
+      // fixes for airbnb
+      'max-classes-per-file': 'off',
+      'no-underscore-dangle': 'off',
+      'no-plusplus': 'off',
+      'consistent-return': 'off',
+      'no-bitwise': 'off',
+      eqeqeq: ['error', 'smart'],
+      'no-restricted-syntax': 'off',
+      'no-param-reassign': 'off',
+      'no-return-assign': ['error', 'except-parens'],
+      'default-case': 'off',
+      'no-continue': 'off',
+      'react/forbid-prop-types': 'off',
+      'no-script-url': 'off',
+      // stuff that should be enabled again later
+      eqeqeq: 'off',
+      'no-nested-ternary': 'off',
+      // FIXME: Remove after merge of https://github.com/SlimeVR/SlimeVR-Server/pull/1494
+      'no-await-in-loop': 'off',
+      '@typescript-eslint/no-use-before-define': 'off',
+      '@typescript-eslint/no-shadow': 'off',
+      'import-x/prefer-default-export': 'off',
+      'import-x/no-cycle': 'off',
+      'import-x/no-rename-default': 'off',
+      'jsx-a11y/heading-has-content': 'off',
+      'jsx-a11y/alt-text': 'off',
+      'jsx-a11y/media-has-caption': 'off',
+      'jsx-a11y/no-static-element-interactions': 'off',
+      'jsx-a11y/click-events-have-key-events': 'off',
+      'jsx-a11y/label-has-associated-control': 'off',
+      'jsx-a11y/no-noninteractive-element-interactions': 'off',
+      'jsx-a11y/no-noninteractive-element-to-interactive-role': 'off',
+      'jsx-a11y/anchor-is-valid': 'off',
+      'react/require-default-props': 'off',
+      'react/no-unstable-nested-components': 'off',
+      'react/no-unused-prop-types': 'off',
+      'react-hooks/rules-of-hooks': 'off',
+      'react-hooks/exhaustive-deps': 'off',
+      // end
+      '@typescript-eslint/switch-exhaustiveness-check': [
+        'error',
+        {
+          considerDefaultExhaustiveForUnions: true,
+        },
+      ],
       'react/react-in-jsx-scope': 'off',
       'react/prop-types': 'off',
       'spaced-comment': 'error',
@@ -60,14 +148,14 @@ export const gui = [
           ignoreRestSiblings: true,
         },
       ],
-    },
-    settings: {
-      'import/resolver': {
-        typescript: {},
-      },
-      react: {
-        version: 'detect',
-      },
+      '@dword-design/import-alias/prefer-alias': [
+        'error',
+        {
+          alias: {
+            '@': './src/',
+          },
+        },
+      ],
     },
   },
   // Global ignore

gui/package.json

@@ -9,21 +9,28 @@
     "@fontsource/poppins": "^5.1.0",
     "@formatjs/intl-localematcher": "^0.2.32",
     "@hookform/resolvers": "^3.6.0",
+    "@react-hookz/deep-equal": "^3.0.3",
     "@react-three/drei": "^9.114.3",
     "@react-three/fiber": "^8.17.10",
+    "@sentry/react": "^9.9.0",
+    "@sentry/vite-plugin": "^2.22.7",
     "@tailwindcss/typography": "^0.5.15",
     "@tanstack/react-query": "^5.48.0",
     "@tauri-apps/api": "^2.0.2",
     "@tauri-apps/plugin-dialog": "^2.0.0",
-    "@tauri-apps/plugin-fs": "^2.0.0",
+    "@tauri-apps/plugin-fs": "2.4.1",
+    "@tauri-apps/plugin-http": "^2.5.0",
     "@tauri-apps/plugin-os": "^2.0.0",
     "@tauri-apps/plugin-shell": "^2.0.0",
     "@tauri-apps/plugin-store": "^2.0.0",
+    "@tweenjs/tween.js": "^25.0.0",
+    "@twemoji/svg": "^15.0.0",
     "browser-fs-access": "^0.35.0",
     "classnames": "^2.5.1",
     "flatbuffers": "22.10.26",
     "intl-pluralrules": "^2.0.1",
     "ip-num": "^1.5.1",
+    "jotai": "^2.12.2",
     "prompts": "^2.4.2",
     "react": "^18.3.1",
     "react-dom": "^18.3.1",
@@ -55,12 +62,16 @@
     "preview-vite": "vite preview",
     "javaversion-build": "cd src-tauri/src/ && javac JavaVersion.java && jar cvfe JavaVersion.jar JavaVersion JavaVersion.class",
     "gen:javaversion": "cd src-tauri/src/ && javac JavaVersion.java && jar cvfe JavaVersion.jar JavaVersion JavaVersion.class",
-    "gen:firmware-tool": "openapi-codegen gen firmwareTool"
+    "gen:firmware-tool": "openapi-codegen gen firmwareTool",
+    "gen:icons": "tauri icon --ios-color '#663499' src-tauri/icons/icon.svg"
   },
   "devDependencies": {
-    "@dword-design/eslint-plugin-import-alias": "^4.0.9",
+    "@dword-design/eslint-plugin-import-alias": "^6.0.3",
+    "@eslint/compat": "^1.3.0",
+    "@eslint/js": "^9.29.0",
     "@openapi-codegen/cli": "^2.0.2",
     "@openapi-codegen/typescript": "^8.0.2",
+    "@stylistic/eslint-plugin": "^3.1.0",
     "@tailwindcss/forms": "^0.5.9",
     "@tauri-apps/cli": "^2.0.2",
     "@types/file-saver": "^2.0.7",
@@ -70,27 +81,29 @@
     "@types/react-modal": "3.16.3",
     "@types/semver": "^7.5.8",
     "@types/three": "^0.163.0",
-    "@typescript-eslint/eslint-plugin": "^7.18.0",
-    "@typescript-eslint/parser": "^7.18.0",
+    "@typescript-eslint/eslint-plugin": "^8.34.0",
+    "@typescript-eslint/parser": "^8.34.0",
     "@vitejs/plugin-react": "^4.3.2",
     "autoprefixer": "^10.4.20",
     "cross-env": "^7.0.3",
     "dotenv": "^16.4.5",
-    "eslint": "^8.57.1",
-    "eslint-config-airbnb": "^19.0.4",
-    "eslint-import-resolver-typescript": "^3.6.3",
-    "eslint-plugin-import": "^2.31.0",
-    "eslint-plugin-jsx-a11y": "^6.10.0",
-    "eslint-plugin-react": "^7.37.1",
-    "eslint-plugin-react-hooks": "^4.6.2",
+    "eslint": "^9.29.0",
+    "eslint-config-airbnb-extended": "^2.1.0",
+    "eslint-config-prettier": "^10.1.5",
+    "eslint-import-resolver-typescript": "^4.4.3",
+    "eslint-plugin-import-x": "^4.15.2",
+    "eslint-plugin-jsx-a11y": "^6.10.2",
+    "eslint-plugin-prettier": "^5.4.1",
+    "eslint-plugin-react": "^7.37.5",
+    "eslint-plugin-react-hooks": "^5.2.0",
     "globals": "^15.10.0",
-    "prettier": "^3.3.3",
+    "prettier": "^3.5.3",
     "rollup-plugin-visualizer": "^5.12.0",
     "sass": "^1.79.4",
     "spdx-satisfies": "^5.0.1",
     "tailwind-gradient-mask-image": "^1.2.0",
     "tailwindcss": "^3.4.13",
-    "vite": "^5.4.8",
-    "typescript-eslint": "^8.8.0"
+    "typescript-eslint": "^8.34.0",
+    "vite": "^5.4.8"
   }
-}
+}

gui/public/i18n/ar/translation.ftl

@@ -7,8 +7,13 @@
 
 ## Websocket (server) status
 
-websocket-connecting = يتم التوصيل بالسيرفر
-websocket-connection_lost = انقطع الاتصال بالسيرفر. يتم إعادة التوصيل...
+websocket-connecting = جاري التحميل
+websocket-connection_lost = تعطل الخادم!
+websocket-connection_lost-desc = يبدو أن خادم SlimeVR تعطل. تحقق من السجلات وأعد تشغيل البرنامج
+websocket-timedout = تعذر الاتصال بالخادم
+websocket-timedout-desc = يبدو أن خادم SlimeVR قد تعطل أو انتهت مهلته. تحقق من السجلات وأعد تشغيل البرنامج
+websocket-error-close = الخروج من SlimeVR
+websocket-error-logs = افتح مجلد السجلات
 
 ## Update notification
 
@@ -49,12 +54,72 @@ body_part-LEFT_HAND = اليد اليسرى
 body_part-LEFT_UPPER_LEG = الفخذ الأيسر
 body_part-LEFT_LOWER_LEG = الكاحل الأيسر
 body_part-LEFT_FOOT = القدم اليسرى
+body_part-LEFT_THUMB_METACARPAL = عظم مشط الإبهام الأيسر
+body_part-LEFT_THUMB_PROXIMAL = الإبهام الأيسر القريب
+body_part-LEFT_THUMB_DISTAL = الإبهام الأيسر البعيد
+body_part-LEFT_INDEX_PROXIMAL = السبابة اليسرى القريبة
+body_part-LEFT_INDEX_INTERMEDIATE = السبابة اليسرى المتوسطة
+body_part-LEFT_INDEX_DISTAL = السبابة اليسرى البعيدة
+body_part-LEFT_MIDDLE_PROXIMAL = الجزء الأوسط الأيسر القريب
+body_part-LEFT_MIDDLE_INTERMEDIATE = الوسط الأيسر المتوسط
+body_part-LEFT_MIDDLE_DISTAL = الجزء الأوسط الأيسر البعيد
+body_part-LEFT_RING_PROXIMAL = الحلقة اليسرى القريبة
+body_part-LEFT_RING_INTERMEDIATE = الحلقة اليسرى المتوسطة
+body_part-LEFT_RING_DISTAL = الحلقة اليسرى البعيدة
+body_part-LEFT_LITTLE_PROXIMAL = الجزء الأيسر الصغير القريب
+body_part-LEFT_LITTLE_INTERMEDIATE = اليسار الصغير المتوسط
+body_part-LEFT_LITTLE_DISTAL = الجزء البعيد الأيسر الصغير
+body_part-RIGHT_THUMB_METACARPAL = مشط الإبهام الأيمن
+body_part-RIGHT_THUMB_PROXIMAL = الإبهام الأيمن القريب
+body_part-RIGHT_THUMB_DISTAL = الإبهام الأيمن البعيد
+body_part-RIGHT_INDEX_PROXIMAL = السبابة اليمنى القريبة
+body_part-RIGHT_INDEX_INTERMEDIATE = السبابة اليمنى المتوسطة
+body_part-RIGHT_INDEX_DISTAL = السبابة اليمنى البعيدة
+body_part-RIGHT_MIDDLE_PROXIMAL = منتصف اليمين القريب
+body_part-RIGHT_MIDDLE_INTERMEDIATE = الوسط الأيمن المتوسط
+body_part-RIGHT_MIDDLE_DISTAL = منتصف اليمين البعيد
+body_part-RIGHT_RING_PROXIMAL = الحلقة اليمنى القريبة
+body_part-RIGHT_RING_INTERMEDIATE = الحلقة اليمنى المتوسطة
+body_part-RIGHT_RING_DISTAL = الحلقة اليمنى البعيدة
+body_part-RIGHT_LITTLE_PROXIMAL = الجزء القريب الأيمن الصغير
+body_part-RIGHT_LITTLE_INTERMEDIATE = المتوسط ​​الصغير الأيمن
+body_part-RIGHT_LITTLE_DISTAL = الجزء البعيد الصغير الأيمن
+
+## BoardType
+
+board_type-UNKNOWN = مجهول
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = لوحة مخصصة
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = سلايم في آر
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = رانجلر جويكونز
+board_type-MOCOPI = سوني موكوبي (Mocopi)
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = قفاز SlimeVR تطوير IMU
 
 ## Proportions
 
 skeleton_bone-NONE = غير محدد
 skeleton_bone-HEAD = إمالة الرأس
+skeleton_bone-HEAD-desc =
+    هذه هي المسافة من سماعة الرأس إلى منتصف رأسك.
+    لضبط المسافة ، هز رأسك من اليسار إلى اليمين كما لو كنت لا توافق وقم بتعديله
+    حتى أي حركة في أجهزة التتبع الأخرى لا تكاد تذكر.
 skeleton_bone-NECK = طول العنق
+skeleton_bone-NECK-desc =
+    هذه هي المسافة من منتصف رأسك إلى قاعدة رقبتك.
+    لضبطها ، حرك رأسك لأعلى ولأسفل كما لو كنت تومئ رأسك أو تميل رأسك
+    إلى اليسار واليمين وقم بتعديله حتى تصبح أي حركة في أجهزة التتبع الأخرى ضئيلة.
 skeleton_bone-torso_group = طول الجذع
 skeleton_bone-UPPER_CHEST = طول أعلى الصدر
 skeleton_bone-CHEST_OFFSET = درجة تشريد الصدر
@@ -81,6 +146,14 @@ skeleton_bone-ELBOW_OFFSET = درجة تشريد الكوع
 ## Tracker reset buttons
 
 reset-reset_all = إعادة تعيين جميع النسب
+reset-reset_all_warning-v2 =
+    <b>تحذير:</b> ستتم إعادة تعيين النسب إلى الإعدادات الافتراضية التي تم تحجيمها إلى الارتفاع الذي تم تكوينه.
+    هل أنت متأكد من أنك تريد القيام بذلك؟
+reset-reset_all_warning-reset = إعادة تعيين النسب
+reset-reset_all_warning-cancel = إلغاء
+reset-reset_all_warning_default-v2 =
+    <b>تحذير:</b> لم يتم ضبط طولك، وسيتم إعادة تعيين نسبك إلى الإعدادات الافتراضية مع الارتفاع الافتراضي.
+    هل أنت متأكد من أنك تريد القيام بذلك؟
 reset-full = اعاده تعيين
 reset-mounting = إعادة تعيين التركيب
 reset-yaw = إعادة تعيين الانعراج
@@ -142,9 +215,12 @@ widget-developer_mode-more_info = المزيد
 ## Widget: IMU Visualizer
 
 widget-imu_visualizer = دوران
+widget-imu_visualizer-preview = عرض
+widget-imu_visualizer-hide = إخفاء
 widget-imu_visualizer-rotation_raw = صافي
 widget-imu_visualizer-rotation_preview = عرض مسبق
-widget-imu_visualizer-rotation_hide = إخفاء
+widget-imu_visualizer-acceleration = التسارع
+widget-imu_visualizer-position = الموضع
 
 ## Widget: Skeleton Visualizer
 
@@ -196,9 +272,17 @@ tracker-infos-url = عنوان URL لجهاز التعقب
 tracker-infos-version = إصدار البرنامج الثابت
 tracker-infos-hardware_rev = مراجعة الأجهزة
 tracker-infos-hardware_identifier = معرف الجهاز
+tracker-infos-data_support = دعم البيانات
 tracker-infos-imu = مستشعر IMU
 tracker-infos-board_type = اللوحة الرئيسية
 tracker-infos-network_version = نسخة البروتوكول
+tracker-infos-magnetometer = المقياس المغناطيسي
+tracker-infos-magnetometer-status-v1 =
+    { $status ->
+        [DISABLED] ملغي
+        [ENABLED] فعال
+       *[NOT_SUPPORTED] غير مدعوم
+    }
 
 ## Tracker settings
 
@@ -213,14 +297,27 @@ tracker-settings-mounting_section-edit = تعديل التركيب
 tracker-settings-drift_compensation_section = السماح بتعويض الانجراف
 tracker-settings-drift_compensation_section-description = هل يجب أن يعوض جهاز التعقب عن انحرافه عند تمكين تعويض الانجراف؟
 tracker-settings-drift_compensation_section-edit = السماح بتعويض الانجراف
+tracker-settings-use_mag = اسمح بالمقياس المغناطيسي على هذا المتتبع
+# Multiline!
+tracker-settings-use_mag-description =
+    هل يجب أن يستخدم هذا المتتبع مقياس المغناطيسية لتقليل الانجراف عند السماح باستخدام المقياس المغناطيسي؟ <b>من فضلا لا تغلق جهاز التتبع الخاص بك أثناء تبديل هذا!</b>
+    
+    تحتاج إلى السماح باستخدام مقياس المغناطيسية أولا ، <magSetting>انقر هنا للذهاب إلى الإعداد</magSetting>.
+tracker-settings-use_mag-label = السماح بالمقياس المغناطيسي
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = اسم جهاز التعقب
 tracker-settings-name_section-description = أعطها لقب لطيف :)
 tracker-settings-name_section-placeholder = ساق نايتي بيست اليسرى
+tracker-settings-name_section-label = اسم جهاز التعقب
 tracker-settings-forget = انسي جهاز التعقب
 tracker-settings-forget-description = يزيل جهاز التعقب من خادم SlimeVR ويمنعه من الاتصال به حتى يتم إعادة تشغيل الخادم. لن تضيع تكوين جهاز التعقب.
 tracker-settings-forget-label = ننسى جهاز التعقب
+tracker-settings-update-unavailable = لا يمكن تحديثه (اصنعها بنفسك)
+tracker-settings-update-up_to_date = حديث
+tracker-settings-update-available = { $versionName } متاح الآن
+tracker-settings-update = التحديث الآن
+tracker-settings-update-title = إصدار البرنامج الثابت
 
 ## Tracker part card info
 
@@ -296,6 +393,9 @@ settings-sidebar-utils = الأدوات المساعدة
 settings-sidebar-serial = وحدة التحكم التسلسلية
 settings-sidebar-appearance = مظهر
 settings-sidebar-notifications = إشعارات
+settings-sidebar-behavior = سلوك
+settings-sidebar-firmware-tool = أداة برامج الجهاز المصنوع بنفسك
+settings-sidebar-advanced = متقدم
 
 ## SteamVR settings
 
@@ -310,10 +410,14 @@ settings-general-steamvr-description =
     مفيد فقط للألعاب أو التطبيقات التي تدعم أجهزة تعقب معينة.
 settings-general-steamvr-trackers-waist = الخصر
 settings-general-steamvr-trackers-chest = الصدر
-settings-general-steamvr-trackers-feet = القدمين
-settings-general-steamvr-trackers-knees = الركبتين
-settings-general-steamvr-trackers-elbows = الكوعين
-settings-general-steamvr-trackers-hands = اليدين
+settings-general-steamvr-trackers-left_foot = القدم اليسرى
+settings-general-steamvr-trackers-right_foot = القدم اليمنى
+settings-general-steamvr-trackers-left_knee = الركبة اليسرى
+settings-general-steamvr-trackers-right_knee = الركبة اليمنى
+settings-general-steamvr-trackers-left_elbow = الكوع الأيسر
+settings-general-steamvr-trackers-right_elbow = الكوع الأيمن
+settings-general-steamvr-trackers-left_hand = اليد اليسرى
+settings-general-steamvr-trackers-right_hand = اليد اليمنى
 settings-general-steamvr-trackers-tracker_toggling = تعيين جهاز التعقب تلقائي
 settings-general-steamvr-trackers-tracker_toggling-description = يتعامل تلقائيا مع تبديل أجهزة تعقب SteamVR أو إيقاف تشغيلها اعتمادا على مهام التعقب الحالية
 settings-general-steamvr-trackers-tracker_toggling-label = تعيين جهاز التعقب التلقائي
@@ -339,14 +443,39 @@ settings-general-tracker_mechanics-filtering-type-smoothing-description = ينع
 settings-general-tracker_mechanics-filtering-type-prediction = التنبؤ
 settings-general-tracker_mechanics-filtering-type-prediction-description = يقلل من وقت الإستجابة ويجعل الحركات أكثر سرعة ، ولكنه قد يزيد من التوتر.
 settings-general-tracker_mechanics-filtering-amount = المبلغ
+settings-general-tracker_mechanics-yaw-reset-smooth-time = إعادة ضبط الانعراج على نحو سلس (يتعطل التنعيم 0 ثوان)
 settings-general-tracker_mechanics-drift_compensation = تعويض الانجراف
 # This cares about multilines
 settings-general-tracker_mechanics-drift_compensation-description =
     يعوض عن انجراف انعراج وحدة IMU بتطبيق دوران عكسي.
     قم بتغيير كمية التعويض وعدد عمليات إعادة التعيين التي يتم أخذها في الاعتبار.
 settings-general-tracker_mechanics-drift_compensation-enabled-label = تعويض الانجراف
+settings-general-tracker_mechanics-drift_compensation-prediction = التنبؤ بتعويض الانحراف
+# This cares about multilines
+settings-general-tracker_mechanics-drift_compensation-prediction-description =
+    يتنبأ بتعويض انحراف الانعراج خارج النطاق المقاس مسبقا.
+    قم بتمكين هذا إذا كانت أجهزة التتبع تدور باستمرار على محور الانعراج.
+settings-general-tracker_mechanics-drift_compensation-prediction-label = التنبؤ بتعويض الانحراف
+settings-general-tracker_mechanics-drift_compensation_warning =
+    <b>تحذير:</b> استخدم تعويض الانحراف فقط إذا كنت بحاجة إلى إعادة الضبط
+    في كثير من الأحيان (كل ~ 5-10 دقائق).
+    
+    تتضمن بعض وحدات IMU المعرضة لإعادة الضبط المتكرر ما يلي:
+    Joy-Cons و owoTrack و MPUs (بدون برامج ثابتة حديثة).
+settings-general-tracker_mechanics-drift_compensation_warning-cancel = إلغاء
+settings-general-tracker_mechanics-drift_compensation_warning-done = أتفهم
 settings-general-tracker_mechanics-drift_compensation-amount-label = مبلغ التعويض
 settings-general-tracker_mechanics-drift_compensation-max_resets-label = استخدام ما يصل إلى x عمليات إعادة التعيين الأخيرة
+settings-general-tracker_mechanics-save_mounting_reset = حفظ معايرة إعادة ضبط التركيب التلقائي
+settings-general-tracker_mechanics-save_mounting_reset-description =
+    يحفظ معايرة إعادة تعيين التثبيت التلقائي لأجهزة التتبع بين عمليات إعادة التشغيل. مفيد
+    عند ارتداء بدلة حيث لا تتحرك المتتبعات بين الجلسات. <b>لا ينصح به للمستخدمين العاديين!</b>
+settings-general-tracker_mechanics-save_mounting_reset-enabled-label = حفظ إعادة تعيين التركيب
+settings-general-tracker_mechanics-use_mag_on_all_trackers = استخدم المقياس المغناطيسي على جميع أجهزة تتبع IMU التي تدعمه
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    يستخدم المقياس المغناطيسي على جميع أجهزة التعقب التي تحتوي على برامج ثابتة متوافقة له ، مما يقلل من الانحراف في البيئات المغناطيسية المستقرة.
+    يمكن تعطيله لكل جهاز تعقب في إعدادات التعقب. <b>من فضلك لا تغلق أيا من أجهزة التعقب أثناء تبديل هذا!</b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = استخدم المقياس المغناطيسي على أجهزة التعقب
 
 ## FK/Tracking settings
 
@@ -370,9 +499,17 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = تثبيت اص
 settings-general-fk_settings-leg_fk = تعقب الساق
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = تمكين إعادة ضبط تركيب القدمين عن طريق المشي على رؤوس الأصابع.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = إعادة تعيين تركيب القدمين
+settings-general-fk_settings-enforce_joint_constraints = حدود الهيكل العظمي
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = فرض القيود
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = منع المفاصل من الدوران إلى ما بعد الحد الأقصى
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = التصحيح مع قيود
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = تصحيح دوران المفاصل عندما تتجاوز حدودها
 settings-general-fk_settings-arm_fk = تعقب الذراع
 settings-general-fk_settings-arm_fk-description = تغيير طريقة تعقب الذراعين.
 settings-general-fk_settings-arm_fk-force_arms = إجبار الذراعين من ايتش أم دي
+settings-general-fk_settings-reset_settings = إعادة تعيين الإعدادات
+settings-general-fk_settings-reset_settings-reset_hmd_pitch-description = أعد تعيين درجة جهاز الرأس (الدوران الرأسي) عند إجراء إعادة تعيين كاملة. مفيد في حالة ارتداء جهاز الرأس على الجبهة ل VTubing أو mocap. لا تقم بتمكين لVR.
+settings-general-fk_settings-reset_settings-reset_hmd_pitch = إعادة تعيين درجة جهاز الرأس
 settings-general-fk_settings-arm_fk-reset_mode-description = قم بتغيير وضع الذراع المتوقع لإعادة ضبط المتصاعد.
 settings-general-fk_settings-arm_fk-back = العودة
 settings-general-fk_settings-arm_fk-back-description = الوضع الافتراضي، مع وضع الذراعين العلويين إلى الخلف والساعدين للأمام.
@@ -398,9 +535,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = مت
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = متوسط انحراف الركبتين ولفة مع الكاحلين
 settings-general-fk_settings-self_localization-title = وضع Mocap
 settings-general-fk_settings-self_localization-description = يسمح وضع Mocap للهيكل العظمي بتعقب موضعه تقريبا بدون سماعة رأس أو أجهزة تعقب أخرى. لاحظ أن هذا يتطلب أجهزة تعقب القدمين والرأس للعمل ولا تزال تجريبية.
-settings-general-fk_settings-vive_emulation-title = محاكاة فايف
-settings-general-fk_settings-vive_emulation-description = محاكاة مشاكل تعقب الخصر التي تعاني منها أجهزة تعقب فايف. هذه مزحة وتجعل التتبع أسوأ.
-settings-general-fk_settings-vive_emulation-label = تمكين محاكاة فايف
 
 ## Gesture control settings (tracker tapping)
 
@@ -449,6 +583,9 @@ settings-general-interface-dev_mode = وضع المطوّر
 settings-general-interface-dev_mode-description = يمكن أن يكون هذا الوضع مفيدًا إذا كنت بحاجة إلى بيانات متعمقة أو للتفاعل مع أجهزة التعقب المتصلة على مستوى أكثر تقدمًا.
 settings-general-interface-dev_mode-label = وضع المطوّر
 settings-general-interface-theme = موضوع اللون
+settings-general-interface-show-navbar-onboarding = إظهار "{ navbar-onboarding }" على قائمة التنقل
+settings-general-interface-show-navbar-onboarding-description = يغير هذا إذا ظهر الزر "{ navbar-onboarding }" على قائمة التنقل.
+settings-general-interface-show-navbar-onboarding-label = إظهار "{ navbar-onboarding }"
 settings-general-interface-lang = اختر اللغة
 settings-general-interface-lang-description = قم بتغيير اللغة الافتراضية التي تريد استخدامها.
 settings-general-interface-lang-placeholder = اختر اللغة التي تريد استخدامها
@@ -460,6 +597,9 @@ settings-interface-appearance-font-os_font = خط نظام التشغيل
 settings-interface-appearance-font-slime_font = الخط الافتراضي
 settings-interface-appearance-font_size = قياس الخط الأساسي
 settings-interface-appearance-font_size-description = يؤثر هذا على حجم خط الواجهة بأكملها باستثناء لوحة الإعدادات هذه.
+settings-interface-appearance-decorations = استخدم الزخارف الأصلية للنظام
+settings-interface-appearance-decorations-description = لن يؤدي هذا إلى عرض الشريط الأعلى للواجهة وسيستخدم نظام التشغيل بدلا من ذلك.
+settings-interface-appearance-decorations-label = استخدم الزخارف الأصلية
 
 ## Notification settings
 
@@ -474,9 +614,29 @@ settings-general-interface-feedback_sound-volume = حجم صوت ردود الف
 settings-general-interface-connected_trackers_warning = تحذير عن أجهزة التعقب المتصلة
 settings-general-interface-connected_trackers_warning-description = سيعرض هذا الخيار نافذة كل مرة تحاول فيها الخروج من SlimeVR أثناء وجود جهاز أو أكثر من أجهزة التعقب المتصلة. سيذكرك بإيقاف تشغيل أجهزة التعقب عند الانتهاء للحفاظ على عمر البطارية.
 settings-general-interface-connected_trackers_warning-label = تحذير عن أجهزة التعقب المتصلة عند الخروج
+
+## Behavior settings
+
+settings-interface-behavior = السلوك
+settings-general-interface-dev_mode = وضع المطوّر
+settings-general-interface-dev_mode-description = يمكن أن يكون هذا الوضع مفيدًا إذا كنت بحاجة إلى بيانات متعمقة أو للتفاعل مع أجهزة التعقب المتصلة على مستوى أكثر تقدمًا.
+settings-general-interface-dev_mode-label = وضع المطوّر
 settings-general-interface-use_tray = تصغير إلى علبة النظام
 settings-general-interface-use_tray-description = يتيح لك إغلاق النافذة دون إغلاق خادم SlimeVR حتى تتمكن من الاستمرار في استخدامه دون إزعاجك من واجهة المستخدم الرسومية.
 settings-general-interface-use_tray-label = تصغير إلى علبة النظام
+settings-general-interface-discord_presence = مشاركة النشاط على Discord
+settings-general-interface-discord_presence-description = يخبر عميل Discord الخاص بك أنك تستخدم SlimeVR جنبا إلى جنب مع عدد أجهزة تعقب IMU التي تستخدمها.
+settings-general-interface-discord_presence-label = مشاركة النشاط على Discord
+settings-general-interface-discord_presence-message =
+    { $amount ->
+        [0] صفر
+        [zero] صفر
+        [one] واحد
+        [two] اثنان
+        [few] قليل
+        [many] كثيرة
+       *[other] أخرى
+    }
 
 ## Serial settings
 
@@ -528,15 +688,10 @@ settings-osc-router-network-address-placeholder = عنوان آي بي في 4
 ## OSC VRChat settings
 
 settings-osc-vrchat = أجهزة تعقب "في ار تشات أوه أس سي"
-# This cares about multilines
-settings-osc-vrchat-description =
-    قم بتغيير الإعدادات الخاصة ب في ار تشات لتلقي بيانات ايتش أم دي وإرسالها
-    بيانات أجهزة تعقب لتعقب الجسم (يعمل على كوست مستقل).
 settings-osc-vrchat-enable = تمكين
 settings-osc-vrchat-enable-description = بتبديل إرسال واستقبال البيانات.
 settings-osc-vrchat-enable-label = تمكين
 settings-osc-vrchat-network = منافذ الشبكة
-settings-osc-vrchat-network-description = قم بتعيين المنافذ للاستماع وإرسال البيانات إلى في ار تشات
 settings-osc-vrchat-network-port_in =
     .label = منفذ الدخول
     .placeholder = منفذ الدخول (الإفتراضي: 9001)
@@ -544,7 +699,6 @@ settings-osc-vrchat-network-port_out =
     .label = منفذ الخروج
     .placeholder = منفذ الخروج (الإفتراضي: 9000)
 settings-osc-vrchat-network-address = عنوان الشبكة
-settings-osc-vrchat-network-address-description = اختر العنوان الذي تريد إرسال البيانات إلى في ار تشات (تحقق من إعدادات واي فاي على جهازك)
 settings-osc-vrchat-network-address-placeholder = عنوان آي بي الخاص بفي ار تشات
 settings-osc-vrchat-network-trackers = أجهزة التعقب
 settings-osc-vrchat-network-trackers-description = تبديل إرسال أجهزة تتبع محددة عبر أوه أس سي.
@@ -577,17 +731,14 @@ settings-osc-vmc-network-address-description = قم بتعيين العنوان
 settings-osc-vmc-network-address-placeholder = عنوان آي بي في 4
 settings-osc-vmc-vrm = نموذج في ار إم
 settings-osc-vmc-vrm-description = قم بتحميل نموذج في ار إم للسماح بتركيز الرأس وتمكين توافق أعلى مع تطبيقات الأخرى
-settings-osc-vmc-vrm-model_unloaded = لم يتم تحميل أي نموذج
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] تحميل النموذج: { $name }
-       *[other] تم تحميل نموذج بدون عنوان
-    }
 settings-osc-vmc-vrm-file_select = اسحب نموذج وأفلته لاستخدامه أو <u> تصفح </ u>
 settings-osc-vmc-anchor_hip = ثبت في الوركين
 settings-osc-vmc-anchor_hip-description = ثبت التعقب في الوركين، هو مفيد إن كنت تيوبنغ جالسًا. في حالة التعطيل، قم بتحميل نموذج في ار إم.
 settings-osc-vmc-anchor_hip-label = ثبت في الوركين
 
+## Advanced settings
+
+
 ## Setup/onboarding menu
 
 onboarding-skip = تخطى الإعداد
@@ -697,7 +848,6 @@ onboarding-connect_tracker-next = لقد قمت بتوصيل جميع أجهزة
 
 onboarding-calibration_tutorial = برنامج تعليم معايرة IMU
 onboarding-calibration_tutorial-subtitle = سوف يساعد هذا في تقليل الانجراف التعقب!
-onboarding-calibration_tutorial-description = كل مرة تقوم بتشغيل أجهزة التعقب، يجب أن تستريح للحظة على سطح مستوٍ للمعايرة. لنفعل الشيء نفسه بالنقر فوق الزر "{ onboarding-calibration_tutorial-calibrate }" ، <b>لا تحركها!</b>
 onboarding-calibration_tutorial-calibrate = وضعت أجهزة التعقب على الطاولة
 onboarding-calibration_tutorial-status-waiting = بانتظارك
 onboarding-calibration_tutorial-status-calibrating = جاري المعايرة
@@ -809,12 +959,12 @@ onboarding-choose_mounting = ما طريقة معايرة التركيب الم
 # Multiline text
 onboarding-choose_mounting-description = اتجاه التركيب يصحح وضع أجهزة التعقب على جسمك.
 onboarding-choose_mounting-auto_mounting = التركيب التلقائي
-# Italized text
-onboarding-choose_mounting-auto_mounting-label = تجريبي
+# Italicized text
+onboarding-choose_mounting-auto_mounting-label-v2 = الموصى به
 onboarding-choose_mounting-auto_mounting-description = سيكتشف هذا تلقائيًا اتجاهات التركيب لجميع أجهزة التعقب من وضعين
 onboarding-choose_mounting-manual_mounting = التركيب اليدوي
-# Italized text
-onboarding-choose_mounting-manual_mounting-label = المستحسن
+# Italicized text
+onboarding-choose_mounting-manual_mounting-label-v2 = قد لا تكون الدقة كافية
 onboarding-choose_mounting-manual_mounting-description = سيسمح لك باختيار اتجاه التثبيت يدويًا لكل جهاز تعقب
 # Multiline text
 onboarding-choose_mounting-manual_modal-title =
@@ -847,44 +997,19 @@ onboarding-automatic_mounting-mounting_reset-title = إعادة تعيين ال
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. قرفص في وضع "التزلج" مع ثني ساقيك ، وإمالة الجزء العلوي من جسمك إلى الأمام ، وثني ذراعيك.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. اضغط على زر "إعادة تعيين التركيب" وانتظر لمدة 3 ثوان قبل إعادة تعيين دوران تركيب أجهزة التعقب.
 onboarding-automatic_mounting-preparation-title = التحضير
-onboarding-automatic_mounting-preparation-step-0 = 1. قف بشكل مستقيم مع ذراعيك على جانبيك.
-onboarding-automatic_mounting-preparation-step-1 = اضغط على زر "إعادة ضبط" و انتظر لمدة 3 ثوانٍ قبل إعادة تعيين أجهزة التعقب.
 onboarding-automatic_mounting-put_trackers_on-title = ارتدي أجهزة التعقب
 onboarding-automatic_mounting-put_trackers_on-description = لمعايرة دوران التركيب، سنستخدم أجهزة التعقب التي قمت بتعيينها. ارتدي جميع أجهزة التعقب، يمكنك معرفة أي منها في المستند على اليمين.
 onboarding-automatic_mounting-put_trackers_on-next = ارتديت جميع أجهزة التعقب.
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = ما هي طريقة معايرة النسب التي يجب استخدامها؟
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    تستخدم نسب الجسم لمعرفة قياسات جسمك. إنهم مطالبون لحساب مواقع أجهزة التعقب.
-    عندما لا تتطابق نسب جسمك مع تلك المحفوظة ، ستكون دقة التعقب أسوأ وستلاحظ أشياء مثل التزلج أو الانزلاق ، أو أن جسمك لا يتطابق مع صورتك الرمزية جيدا.
-    <b>ما عليك سوى قياس جسمك مرة واحدة!</b> إن لم تكن خاطئة أو تغير جسمك ، فلن تحتاج إلى القيام بها مرة أخرى.
-onboarding-choose_proportions-auto_proportions = النسب التلقائية
-# Italized text
-onboarding-choose_proportions-auto_proportions-subtitle = الموصى به
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    سيؤدي ذلك إلى تخمين نسبك عن طريق تسجيل عينة من تحركاتك وتمريرها عبر خوارزمية.
-    
-    <b>يتطلب ذلك توصيل جهاز الواقع الافتراضي (HMD) ب SlimeVR و وضعها  على رأسك!</b>
-onboarding-choose_proportions-manual_proportions = النسب اليدوية
-# Italized text
-onboarding-choose_proportions-manual_proportions-subtitle = للمسات الصغيرة
-onboarding-choose_proportions-manual_proportions-description = سيسمح لك بتعديل النسب يدويًا عن طريق تعديلها مباشرة
-onboarding-choose_proportions-export = تصدير النسب
-onboarding-choose_proportions-import = استيراد النسب
-onboarding-choose_proportions-import-success = تم استيراده
-onboarding-choose_proportions-import-failed = فشل
-onboarding-choose_proportions-file_type = ملف نسب الجسم
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = العودة إلى برنامج تعليم إعادة التعيين
 onboarding-manual_proportions-title = نسب الجسم اليدوية
-onboarding-manual_proportions-precision = ضبط الدقة
-onboarding-manual_proportions-auto = المعايرة التلقائية
-onboarding-manual_proportions-ratio = اضبط حسب مجموعات النسب
+onboarding-manual_proportions-fine_tuning_button = ضبط النسب تلقائيا
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = يرجى توصيل سماعة رأس VR لاستخدام الضبط الدقيق التلقائي
+onboarding-manual_proportions-export = تصدير النسب
+onboarding-manual_proportions-import = استيراد النسب
+onboarding-manual_proportions-file_type = ملف نسب الجسم
 
 ## Tracker automatic proportions setup
 
@@ -905,21 +1030,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     يقوم جهاز الواقع الافتراضي بالإبلاغ عن البيانات الموضعية إلى خادم SlimeVR (وهذا يعني عموما تشغيل SteamVR وتوصيله ب SlimeVR باستخدام برنامج تشغيل SteamVR الخاص ب SlimeVR).
     يعمل التتبع الخاص بك ويمثل تحركاتك بدقة (على سبيل المثال ، لقد أجريت إعادة تعيين كاملة وتتحرك في الاتجاه الصحيح عند الركل, الانحناء, الجلوس, إلخ).
 onboarding-automatic_proportions-requirements-next = لقد قرأت المتطلبات
-onboarding-automatic_proportions-check_height-title = تحقق من طولك
-onboarding-automatic_proportions-check_height-description = نستخدم طولك كأساس لقياساتنا باستخدام ارتفاع HMD كتقريب لطولك الفعلي ، ولكن من الأفضل التحقق مما إذا كانت صحيحة بنفسك!
+onboarding-automatic_proportions-check_height-title-v3 = قم بقياس ارتفاع سماعة الرأس
+onboarding-automatic_proportions-check_height-description-v2 = يجب أن يكون ارتفاع سماعة الرأس (HMD) أقل قليلا من طولك الكامل ، حيث تقيس سماعات الرأس ارتفاع عينيك. سيتم استخدام هذا القياس كخط أساس لنسب جسمك.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = يرجى الضغط على الزر أثناء الوقوف <u>في وضع مستقيم</u> لحساب طولك. لديك 3 ثوان بعد الضغط على الزر!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = ابدأ في القياس أثناء الوقوف <u>في وضع مستقيم</u> لقياس طولك. احرص على عدم رفع يديك أعلى من سماعة الرأس ، لأنها قد تؤثر على القياس!
 onboarding-automatic_proportions-check_height-guardian_tip =
     إذا كنت تستخدم سماعة رأس VR مستقلة ، فتأكد من تشغيل حدود الحارس /
     لكي يكون طولك صحيحا!
-onboarding-automatic_proportions-check_height-fetch_height = أنا واقف!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = مجهول
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = طولك من خلال HMD
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = لذا فإن طولك الفعلي هو
+onboarding-automatic_proportions-check_height-hmd_height2 = ارتفاع سماعة الرأس هو:
+onboarding-automatic_proportions-check_height-measure-start = ابدأ القياس
+onboarding-automatic_proportions-check_height-measure-stop = توقف عن القياس
+onboarding-automatic_proportions-check_height-measure-reset = إعادة محاولة القياس
 onboarding-automatic_proportions-check_height-next_step = انهم بخير
+onboarding-automatic_proportions-check_floor_height-title = قم بقياس الارتفاع عن الأرض (اختياري)
+onboarding-automatic_proportions-check_floor_height-description = في بعض الحالات، قد لا يتم ضبط الارتفاع عن الأرض بشكل صحيح بواسطة سماعة الرأس، مما يتسبب في قياس ارتفاع سماعة الرأس على أنه أعلى مما ينبغي. يمكنك قياس "الارتفاع" عن الأرض لتصحيح ارتفاع سماعة الرأس.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = ابدأ بقياس و ضع وحدة التحكم على الأرض لقياس ارتفاعها. إذا كنت متأكدا من صحة الارتفاع عن الأرض ، فيمكنك تخطي هذه الخطوة.
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = الارتفاع عن الأرض هو:
+onboarding-automatic_proportions-check_floor_height-full_height = طولك الكامل المقدر هو:
+onboarding-automatic_proportions-check_floor_height-measure-start = ابدأ القياس
+onboarding-automatic_proportions-check_floor_height-measure-stop = توقف عن القياس
+onboarding-automatic_proportions-check_floor_height-measure-reset = إعد محاولة القياس
+onboarding-automatic_proportions-check_floor_height-skip_step = تخطي الخطوة وحفظ
+onboarding-automatic_proportions-check_floor_height-next_step = استخدم الارتفاع عن الأرض وحفظه
 onboarding-automatic_proportions-start_recording-title = استعد للتحرك
 onboarding-automatic_proportions-start_recording-description = سنقوم الآن بتسجيل بعض الوضعيات والحركات المحددة. ستتم مطالبتك بذلك في الشاشة التالية. كن مستعدا للبدء عند الضغط على الزر!
 onboarding-automatic_proportions-start_recording-next = بدء التسجيل
@@ -953,10 +1090,33 @@ onboarding-automatic_proportions-verify_results-redo = إعادة التسجيل
 onboarding-automatic_proportions-verify_results-confirm = تبدو صحيحة
 onboarding-automatic_proportions-done-title = تم قياس الجسم و حفظه.
 onboarding-automatic_proportions-done-description = اكتملت معايرة نسب جسمك!
-onboarding-automatic_proportions-error_modal =
-    <b>تحذير:</b> تم العثور على خطأ أثناء تقدير النسب!
-    يرجى <docs>التحقق من المستندات</docs> أو الانضمام إلى <discord>Discord</discord> للحصول على المساعدة ^_^
+onboarding-automatic_proportions-error_modal-v2 =
+    <b>تحذير:</b> حدث خطأ أثناء تقدير النسب!
+    من المحتمل أن تكون هذه مشكلة معايرة التركيب. تأكد من أن التعقب يعمل بشكل صحيح قبل المحاولة مرة أخرى.
+    يرجى <docs>التحقق من التعليمات</docs> أو الانضمام إلى <discord>Discord</discord> للحصول على المساعدة ^_^
 onboarding-automatic_proportions-error_modal-confirm = مفهوم!
+onboarding-automatic_proportions-smol_warning =
+    الارتفاع الذي تم تكوينه هو { $height } و هو أصغر من الحد الأدنى للارتفاع المقبول البالغ { $minHeight }.
+    <b>يرجى إعادة القياسات والتأكد من صحتها.</b>
+onboarding-automatic_proportions-smol_warning-cancel = الرجوع
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = النسب المقاسة
+onboarding-scaled_proportions-description = لكي تعمل أجهزة التعقب SlimeVR ، نحتاج إلى معرفة طول عظامك. ستستخدم نسبة متوسطة وقياسها بناء على طولك.
+onboarding-scaled_proportions-manual_height-title = تكوين طولك
+onboarding-scaled_proportions-manual_height-description-v2 = سيتم استخدام هذا الطول كخط أساس لنسب جسمك.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR غير متصل حاليا ب SlimeVR ، لذلك لا يمكن أن تستند القياسات إلى سماعة الرأس الخاصة بك. <b>تابع على مسؤوليتك الخاصة أو تحقق من المستندات!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = طولك الكامل هو
+onboarding-scaled_proportions-manual_height-estimated_height = الارتفاع المقدر لسماعة الرأس هو:
+onboarding-scaled_proportions-manual_height-next_step = المتابعة والحفظ
+onboarding-scaled_proportions-manual_height-warning-no_hmd = وصّل سماعة رأس VR
+
+## Tracker scaled proportions reset
+
+
+## Stay Aligned setup
+
 
 ## Home
 
@@ -981,6 +1141,21 @@ status_system-StatusSteamVRDisconnected =
     }
 status_system-StatusTrackerError = يحتوي جهاز التعقب { $trackerName } على خطأ.
 
+## Firmware tool globals
+
+
+## Firmware tool Steps
+
+
+## firmware tool build status
+
+
+## Firmware update status
+
+
+## Dedicated Firmware Update Page
+
+
 ## Tray Menu
 
 tray_menu-show = عرض
@@ -1008,3 +1183,6 @@ unknown_device-modal-description =
     هل تريد توصيله ب SlimeVR؟
 unknown_device-modal-confirm = أكيد
 unknown_device-modal-forget = تجاهلها
+
+## Error collection consent modal
+

gui/public/i18n/cs/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Připojování k serveru
 websocket-connection_lost = Ztraceno spojení se serverem. Pokouším se znovu připojit...
+websocket-connection_lost-desc = Vypadá to že SlimeVR server spadl. Zkontrolujte záznamy protokolů a restartuje aplikaci
+websocket-timedout = Nelze se připojit k serveru
+websocket-timedout-desc = Vypadá to že buď vypršel časový limit SlimeVR serveru, a nebo došlo k zhroucení. Zkontrolujte záznamy protokolů a restartuje aplikaci
+websocket-error-close = Ukončit SlimeVR
+websocket-error-logs = Otevření složku s záznamy protokolů
 
 ## Update notification
 
@@ -49,6 +54,33 @@ body_part-LEFT_HAND = Levá ruka
 body_part-LEFT_UPPER_LEG = Levé stehno
 body_part-LEFT_LOWER_LEG = Levý kotník
 body_part-LEFT_FOOT = Levá noha
+body_part-LEFT_THUMB_DISTAL = Vzdálená falanga levého palce
+body_part-LEFT_INDEX_DISTAL = Vzálená kůstka levého ukazováku
+body_part-LEFT_MIDDLE_DISTAL = Vzálená kůstka levého prostředníku
+body_part-LEFT_RING_DISTAL = Vzálená kůstka levého prsteníku
+body_part-RIGHT_THUMB_DISTAL = Vzálená falanga pravého pacle
+
+## BoardType
+
+board_type-UNKNOWN = Neznámý
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Vlastní deska
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycony
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR vývojářská IMU rukavice
 
 ## Proportions
 
@@ -67,6 +99,9 @@ skeleton_bone-leg_group = Délka nohy
 skeleton_bone-UPPER_LEG = Délka horní části nohy
 skeleton_bone-LOWER_LEG = Délka dolní části nohy
 skeleton_bone-FOOT_LENGTH = Délka chodidla
+skeleton_bone-FOOT_LENGTH-desc =
+    Toto je vzdálenost mezi vaši kotníky a prsty na nohou.
+    Pro upravení, Chodtě po špičkách dokud vaše virtuální nohy nezůstanou na místě.
 skeleton_bone-FOOT_SHIFT = Odsazení chodidla
 skeleton_bone-SKELETON_OFFSET = Odsazení kostry
 skeleton_bone-SHOULDERS_DISTANCE = Vzdálenost ramen
@@ -81,6 +116,14 @@ skeleton_bone-ELBOW_OFFSET = Odsazení loktů
 ## Tracker reset buttons
 
 reset-reset_all = Obnovit nastavení proporcí
+reset-reset_all_warning-v2 =
+    <b>Varování:</b> vyše proporce budou obnoveny do výchozích hodnot založených na vaší nakonfigurované výšce. 
+    Jste si jistí že chcete udělat?
+reset-reset_all_warning-reset = Obnovit proporce
+reset-reset_all_warning-cancel = Zrušit
+reset-reset_all_warning_default-v2 =
+    <b>Varování:</b> Vaše výška ještě nebyla nakonfigurována, vaše proporce se obnoví do výchozích hodnot založených na výchozí výšce.
+    Jste si jistí že to chcete udělat?
 reset-full = Plný Reset
 reset-mounting = Znovu nastavit nasazení
 reset-yaw = Rychlý reset
@@ -112,7 +155,7 @@ bvh-recording = Nahrávání...
 ## Tracking pause
 
 tracking-unpaused = Pozastavit sledování
-tracking-paused = Pokračovat se sledováním
+tracking-paused = Pokračovat v sledování
 
 ## Widget: Overlay settings
 
@@ -142,9 +185,13 @@ widget-developer_mode-more_info = Více informací
 ## Widget: IMU Visualizer
 
 widget-imu_visualizer = Rotace
+widget-imu_visualizer-preview = Náhled
+widget-imu_visualizer-hide = Skrýt
 widget-imu_visualizer-rotation_raw = Nezpracované
 widget-imu_visualizer-rotation_preview = Náhled
-widget-imu_visualizer-rotation_hide = Skrýt
+widget-imu_visualizer-acceleration = Akcelerace
+widget-imu_visualizer-position = Pozice
+widget-imu_visualizer-stay_aligned = Zůstaň Srovaný (Stay Aligned)
 
 ## Widget: Skeleton Visualizer
 
@@ -172,6 +219,7 @@ tracker-table-column-temperature = Teplota °C
 tracker-table-column-linear-acceleration = Akcel. X/Y/Z
 tracker-table-column-rotation = Rotace X/Y/Z
 tracker-table-column-position = Pozice X/Y/Z
+tracker-table-column-stay_aligned = Zůstaň Srovaný (Stay Aligned)
 tracker-table-column-url = URL
 
 ## Tracker rotation
@@ -196,9 +244,17 @@ tracker-infos-url = URL Trackeru
 tracker-infos-version = Verze firmwaru
 tracker-infos-hardware_rev = Revize hardwaru
 tracker-infos-hardware_identifier = ID hardwaru
+tracker-infos-data_support = Datový typ
 tracker-infos-imu = Senzor IMU
 tracker-infos-board_type = Základní deska
 tracker-infos-network_version = Verze protokolu
+tracker-infos-magnetometer = Magnetometr
+tracker-infos-magnetometer-status-v1 =
+    { $status ->
+        [DISABLED] Zakázáno
+        [ENABLED] Povoleno
+       *[NOT_SUPPORTED] Není podporováno
+    }
 
 ## Tracker settings
 
@@ -213,13 +269,28 @@ tracker-settings-mounting_section-edit = Upravit nasazení
 tracker-settings-drift_compensation_section = Povolit kompenzaci driftu
 tracker-settings-drift_compensation_section-description = Měl by tento tracker kompenzovat svůj drift, když je zapnuta kompenzace driftu?
 tracker-settings-drift_compensation_section-edit = Povolit kompenzaci driftu
+tracker-settings-use_mag = Povolit magnetometr na tomto trackeru
+# Multiline!
+tracker-settings-use_mag-description =
+    Měl by tento tracker používat magnetometer k redukci driftu když je použití magnetometru povoleno? <b> Prosím nevypínejte váš tracker při přepínání tohoto nastavení!</b>
+    
+    Nejprve musíte povolit používání magnetometru, <magSetting>Kliknutím zde přejdete k nastavená magnetometru</magSetting>.
+tracker-settings-use_mag-label = Povolit magnetometr
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = Název trackeru
 tracker-settings-name_section-description = Třeba nějakou roztomilou přezdívku :)
 tracker-settings-name_section-placeholder = Erimelova levá tlapka
+tracker-settings-name_section-label = Název trackeru
 tracker-settings-forget = Zapomenout tracker
+tracker-settings-forget-description = Odebere tracker z SlimeVR Serveru a zabrání jeho opětovnému připojení do té doby, dokud nebude server restarován. Konfigurace trackeru nebude ztracena.
 tracker-settings-forget-label = Zapomenout tracker
+tracker-settings-update-unavailable = Nelze aktualizovat (DIY)
+tracker-settings-update-low-battery = Nelze provést aktualizaci. Baterie má méně než 50%
+tracker-settings-update-up_to_date = Aktuální
+tracker-settings-update-available = { $versionName } je nyní dostupný
+tracker-settings-update = Aktualizovat nyní
+tracker-settings-update-title = Verze Firmwareu
 
 ## Tracker part card info
 
@@ -286,6 +357,7 @@ mounting_selection_menu-close = Zavřít
 settings-sidebar-title = Nastavení
 settings-sidebar-general = Obecné
 settings-sidebar-tracker_mechanics = Mechanika trackerů
+settings-sidebar-stay_aligned = Zůstaň Srovaný (Stay Aligned)
 settings-sidebar-fk_settings = Nastavení trackování
 settings-sidebar-gesture_control = Ovládání gesty
 settings-sidebar-interface = Rozhraní
@@ -295,6 +367,10 @@ settings-sidebar-utils = Nástroje
 settings-sidebar-serial = Sériová konzole
 settings-sidebar-appearance = Vzhled
 settings-sidebar-notifications = Notifikace
+settings-sidebar-behavior = Chování
+settings-sidebar-firmware-tool = Nástroj pro DIY firmware
+settings-sidebar-vrc_warnings = Varovaní VRChat konfigurace
+settings-sidebar-advanced = Pokročilé
 
 ## SteamVR settings
 
@@ -309,8 +385,20 @@ settings-general-steamvr-description =
     Užitečné pro hry nebo aplikace, které podporují pouze určité trackery.
 settings-general-steamvr-trackers-waist = Pás
 settings-general-steamvr-trackers-chest = Hrudník
+settings-general-steamvr-trackers-left_foot = Levá noha
+settings-general-steamvr-trackers-right_foot = Pravá noha
+settings-general-steamvr-trackers-left_knee = Levé koleno
+settings-general-steamvr-trackers-right_knee = Pravé koleno
+settings-general-steamvr-trackers-left_elbow = Levý loket
+settings-general-steamvr-trackers-right_elbow = Pravý loket
+settings-general-steamvr-trackers-left_hand = Levá ruka
+settings-general-steamvr-trackers-right_hand = Pravá ruka
 settings-general-steamvr-trackers-tracker_toggling = Automatické přiřazení trackeru
 settings-general-steamvr-trackers-tracker_toggling-description = Automaticky zapne trackery ve SteamVR v závislosti na aktuálním přiřazením trackerů.
+settings-general-steamvr-trackers-tracker_toggling-label = Automatické přiřazení trackeru
+settings-general-steamvr-trackers-hands-warning =
+    <b>Varování:</b> trackery rukou přepíší vaše ovladače.
+    Jste si jistí?
 settings-general-steamvr-trackers-hands-warning-cancel = Zrušit
 settings-general-steamvr-trackers-hands-warning-done = Ano
 
@@ -330,15 +418,52 @@ settings-general-tracker_mechanics-filtering-type-smoothing-description = Vyhlaz
 settings-general-tracker_mechanics-filtering-type-prediction = Predikce
 settings-general-tracker_mechanics-filtering-type-prediction-description = Zkracuje prodlevu a zrychluje pohyby, ale může způsobit třesení trackerů.
 settings-general-tracker_mechanics-filtering-amount = Množství
+settings-general-tracker_mechanics-yaw-reset-smooth-time = Čas vyhlazení resetu svislé osy (0s pro vypnutí vyhlazení)
 settings-general-tracker_mechanics-drift_compensation = Kompenzace driftu
 # This cares about multilines
 settings-general-tracker_mechanics-drift_compensation-description =
     Kompenzuje vychýlení IMU použitím inverzní rotace.
     Změňte velikost kompenzace a počet resetů, které jsou brány v úvahu.
 settings-general-tracker_mechanics-drift_compensation-enabled-label = Kompenzace driftu
+settings-general-tracker_mechanics-drift_compensation-prediction = Predikce kompenzace driftu
+# This cares about multilines
+settings-general-tracker_mechanics-drift_compensation-prediction-description =
+    Předpovídá kompenzaci driftu svislé osy přes předešle změřený rozsah.
+    Povolte toto pokud se vaše trackery neustále otáčejí na vertikální ose.
+settings-general-tracker_mechanics-drift_compensation-prediction-label = Predikce kompenzace driftu
+settings-general-tracker_mechanics-drift_compensation_warning =
+    <b>Varování:</b> Kompenzaci driftu používejte pouze tehdy kdy musíte resetovat
+    Neobvykle často (každých ~5-10 minut).
+    
+    Některé IMU které náchylné k častým resetům zahrnují:
+    Joy-Cons, owoTrack a MPU (bez aktuálního firmwaru).
+settings-general-tracker_mechanics-drift_compensation_warning-cancel = Zrušit
+settings-general-tracker_mechanics-drift_compensation_warning-done = Rozumím
 settings-general-tracker_mechanics-drift_compensation-amount-label = Množství kompenzace
 settings-general-tracker_mechanics-drift_compensation-max_resets-label = Použít až x posledních obnovení
+settings-general-tracker_mechanics-save_mounting_reset = Uložit automatickou kalibraci obnovení připevnění
+settings-general-tracker_mechanics-save_mounting_reset-description =
+    Uloží automatické kalibrování resetování umístění pro trackery mezi restarty. Užitečné
+    pokud máte oblek, na kterém se umístění trackeru nemění mezi relacemi. <b>Nedoporučováno pro uživatele s běžnou sestavou</b>
 settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Uložit "Kalibraci nasazení"
+settings-general-tracker_mechanics-use_mag_on_all_trackers = Použít magnetometr na všech IMU trackerech, které jej podporují
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    Použití magnetometr na všech trackerech které pro to mají kompatibilní firmware, snížení drifutu v stailních magnetických prostředích.
+    Může být vypnuto pro jednotivé trackery v jejich nastaveních. <b> Prosíme nevypínejte žádný z trackerů při přepínání tohoto nastavení! </b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Použít magnetometru na trackerech
+settings-stay_aligned = Zůstaň Srovaný (Stay Aligned)
+settings-stay_aligned-description = Zůstaň Srovaný redukuje drift pomocí postupného upravování vašich trackerů do vaší relaxůjící pózy.
+settings-stay_aligned-setup-label = Nastavte Zůstaň Sronaný
+settings-stay_aligned-setup-description = Musíte dokončit "Nastvení Zůstaň Srovaný" pro zapnutí Zůstaň Srovnaný.
+settings-stay_aligned-warnings-drift_compensation = ⚠ Prosím vypněte Kompenzaci Driftu! Kompenzace driftu bude narušovat funkčnost Zůstaň Srovnaný.
+settings-stay_aligned-enabled-label = Upravit trackery
+settings-stay_aligned-general-label = Obecné
+settings-stay_aligned-relaxed_poses-label = Relaxovací Póza
+settings-stay_aligned-relaxed_poses-standing = Upravit trackery při stoje
+settings-stay_aligned-relaxed_poses-reset_pose = Obnovit pózu
+settings-stay_aligned-relaxed_poses-close = Zavřít
+settings-stay_aligned-debug-label = Ladění
+settings-stay_aligned-debug-copy-label = Zkopírovat nastavení do schránky
 
 ## FK/Tracking settings
 
@@ -362,9 +487,16 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = Narovnání chod
 settings-general-fk_settings-leg_fk = Sledování nohou
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Aktivovat reset nasazení nohou stoupnutím na špičky.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Reset nasazení nohou
+settings-general-fk_settings-enforce_joint_constraints = Limity kostry
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Prosazování omezení
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Zabránit rotaci kloubům za jejich limit
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Opravit pomocí omezení
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Opravit rotaci kloubů, když překročí svůj limit
 settings-general-fk_settings-arm_fk = Trackování ramen
 settings-general-fk_settings-arm_fk-description = Vynutit sledování rukou z VR headsetu, i když jsou k dispozici údaje o poloze rukou z trackerů.
 settings-general-fk_settings-arm_fk-force_arms = Vynutit ruce z VR Headsetu
+settings-general-fk_settings-reset_settings = Obnovit nastavení
+settings-general-fk_settings-reset_settings-reset_hmd_pitch = Obnovit HMD pitch
 settings-general-fk_settings-arm_fk-reset_mode-description = Nastavte pózu rukou použitá pro reset nasazení.
 settings-general-fk_settings-arm_fk-back = Paže dozadu
 settings-general-fk_settings-arm_fk-back-description = Výchozí režim: paže směřují dozadu, předloktí dopředu.
@@ -374,11 +506,15 @@ settings-general-fk_settings-arm_fk-tpose_down = T-póza (ruce dolů)
 settings-general-fk_settings-arm_fk-tpose_down-description = Před zahájením plného resetu, očekává že zaujmete uvolněný postoj a pomalu zvednete paže do pozice Téčka (90 stupňů jako písmeno T). A pro reset umístění, že stojíte vzpřímeně a máte paže volně spuštěné podél těla.
 settings-general-fk_settings-arm_fk-forward = Vpřed
 settings-general-fk_settings-arm_fk-forward-description = Ideální pozice pro Vtubing: zvedněte paže do 90 stupňového úhlu. (90 stupňů jako písmeno T).
+settings-general-fk_settings-skeleton_settings-toggles = Přepínače kostry
 settings-general-fk_settings-skeleton_settings-description = Zapnutí nebo vypnutí nastavení kostry. Je doporučeno je ponechat zapnuté.
+settings-general-fk_settings-skeleton_settings-extended_spine_model = Prodloužení modelu páteře
+settings-general-fk_settings-skeleton_settings-extended_pelvis_model = Model s prodloužením pánve
+settings-general-fk_settings-skeleton_settings-extended_knees_model = Model s prodloužením kolene
+settings-general-fk_settings-skeleton_settings-ratios = Poměry kostry
+settings-general-fk_settings-skeleton_settings-ratios-description = Změňte hodnoty nastavení kostry, Po změně budete možná muset poupravit vaše proporce.
+settings-general-fk_settings-self_localization-title = Režim Mocap
 settings-general-fk_settings-self_localization-description = Režim Mocap je experimentální funkce, která dokáže přibližně určit polohu vašeho těla bez VR Headsetu a dalších trackerů. Pro správnou funkci je však nutné mít trackery pro nohy a hlavu.
-settings-general-fk_settings-vive_emulation-title = Vive emulace
-settings-general-fk_settings-vive_emulation-description = Napodobit problémy Vive trackerů. Tohle je jenom pro vtip a zhoršuje trackování.
-settings-general-fk_settings-vive_emulation-label = Povolení emulace Vive
 
 ## Gesture control settings (tracker tapping)
 
@@ -402,9 +538,17 @@ settings-general-gesture_control-trackers =
         [many] { $amount } trackerů
        *[other] { $amount } trackerů
     }
+settings-general-gesture_control-yawResetEnabled = Povolit klepnutí pro reset odklonu
+settings-general-gesture_control-yawResetDelay = Zpoždění resetu vybočení
+settings-general-gesture_control-yawResetTaps = Klepnutí pro resetování rotace
+settings-general-gesture_control-fullResetEnabled = Povolit klepnutí pro úplné restartování
+settings-general-gesture_control-fullResetDelay = Zpoždění úplného obnovení
+settings-general-gesture_control-fullResetTaps = Klepnutí pro úplný reset
 settings-general-gesture_control-mountingResetEnabled = Povolit klepnutí pro resetování montáže
 settings-general-gesture_control-mountingResetDelay = Zpoždění resetování montáže
 settings-general-gesture_control-mountingResetTaps = Klepnutí pro resetování montáže
+# The number of trackers that can have higher acceleration before a tap is rejected
+settings-general-gesture_control-numberTrackersOverThreshold = Trackery překročily práh
 settings-general-gesture_control-numberTrackersOverThreshold-description = Zvyšte tuto hodnotu, pokud detekce klepnutí nefunguje. Nepřekračujte ji nad hodnotu, která je potřebná k tomu, aby detekce klepnutí fungovala, protože by to mohlo způsobit více falešně pozitivních klepnutí.
 
 ## Appearance settings
@@ -414,16 +558,23 @@ settings-general-interface-dev_mode = Vývojářský režim
 settings-general-interface-dev_mode-description = Tento režim může být užitečný, pokud potřebujete podrobné údaje nebo omunikovat s trackerama na pokročilejší úrovni.
 settings-general-interface-dev_mode-label = Vývojářský režim
 settings-general-interface-theme = Barva tématu
+settings-general-interface-show-navbar-onboarding = Zobrazit "{ navbar-onboarding }" na navigačním panelu
+settings-general-interface-show-navbar-onboarding-description = Tohle mění jestli bude tlačítko pro "{ navbar-onboarding }" zobrazeno na navigačním panelu
+settings-general-interface-show-navbar-onboarding-label = Zobrazit "{ navbar-onboarding }"
 settings-general-interface-lang = Zvolte jazyk
 settings-general-interface-lang-description = Změňte výchozí jazyk, který chcete používat.
 settings-general-interface-lang-placeholder = Zvolte jazyk, který chcete používat.
 # Keep the font name untranslated
 settings-interface-appearance-font = Font rozhraní
+settings-interface-appearance-font-description = Tohle mění font který používá rozhraní
 settings-interface-appearance-font-placeholder = Toto změní písmo používané v rozhraní.
 settings-interface-appearance-font-os_font = Systémový font
 settings-interface-appearance-font-slime_font = Výchozí font
 settings-interface-appearance-font_size = Výchozí velikost písma
 settings-interface-appearance-font_size-description = Toto ovlivňuje velikost písma celého rozhraní, s výjimkou panelu nastavení.
+settings-interface-appearance-decorations = Použít nativní dekorace systému
+settings-interface-appearance-decorations-description = Tímto se nebude vykreslovat horní lišta rozhraní, a místo toho se použije vlastní barva lišty zvolená v operačním systému.
+settings-interface-appearance-decorations-label = Použít nativní dekorace
 
 ## Notification settings
 
@@ -438,9 +589,35 @@ settings-general-interface-feedback_sound-volume = Hlasitost zvuku zpětné vazb
 settings-general-interface-connected_trackers_warning = Upozornění o připojených trackerů
 settings-general-interface-connected_trackers_warning-description = Tato možnost zobrazí vyskakovací okno pokaždé, když se pokusíte opustit SlimeVR, když máte připojen jeden nebo více trackerů. Připomene vám, abyste vypnuli své trackery, až budete hotovi, abyste prodloužili životnost baterie.
 settings-general-interface-connected_trackers_warning-label = Upozornění o připojených trackerech při ukončení
+
+## Behavior settings
+
+settings-interface-behavior = Chování
+settings-general-interface-dev_mode = Vývojářský režim
+settings-general-interface-dev_mode-description = Tento režim může být užitečný, pokud potřebujete podrobné údaje nebo omunikovat s trackerama na pokročilejší úrovni.
+settings-general-interface-dev_mode-label = Vývojářský režim
 settings-general-interface-use_tray = Minimalizovat do oznamovací oblasti
 settings-general-interface-use_tray-description = Umožňuje vám zavřít okno, aniž byste zavřeli SlimeVR Server, takže ho můžete nadále používat bez rozhraní.
 settings-general-interface-use_tray-label = Minimalizovat do oznamovací oblasti
+settings-general-interface-discord_presence = Sdílet aktivitu na Discordu
+settings-general-interface-discord_presence-description = Sdělí Discord klientu, že používáte SlimeVR společně s počtem trackerů IMU, které používáte.
+settings-general-interface-discord_presence-label = Sdílet aktivitu na Discordu
+settings-general-interface-discord_presence-message =
+    { $amount ->
+        [0] Sliming around
+        [one] Používá 1 tracker
+        [few] Používá { $amount } trackery
+        [many] Používá { $amount } trackerů
+       *[other] Používá { $amount } trackerů
+    }
+settings-interface-behavior-error_tracking = Sběr chyb prostřednictvím Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Souhlasíte se shromažďováním anonymizovaých údajů o chybých?</h1>
+    
+    <b>Neschrožďujeme osobní udaje!</b> pro příklad IP adresy nebo přihlašovací údaje k sítím Wi-Fi. SlimeVR respektuje vaše soukromí!
+    
+    Aby jsme mohli poskytnout nejlepší zážitek uživatelům, schromažďujeme proto anonymizované zprávy o chybých, metriky výkon a informace o operačním systém. To nám pomáhá zjištovat chyby a problémy s SlimeVR. Tyto matriky jsou schromažďovány prostřednictvím Sentry.io.
+settings-interface-behavior-error_tracking-label = Odeslat chyby vývojářům
 
 ## Serial settings
 
@@ -463,6 +640,8 @@ settings-serial-get_infos = Získat informace
 settings-serial-serial_select = Vyberte sériový port
 settings-serial-auto_dropdown_item = Auto
 settings-serial-get_wifi_scan = Skenovat WiFi
+settings-serial-file_type = Prostý text
+settings-serial-save_logs = Uložit jako soubor
 
 ## OSC router settings
 
@@ -492,10 +671,18 @@ settings-osc-router-network-address-placeholder = Adresa IPV4
 ## OSC VRChat settings
 
 settings-osc-vrchat = Trackery VRChat OSC
+# This cares about multilines
+settings-osc-vrchat-description-v1 =
+    Pro změnu nastavení specifických pro standart OSC pro odesílání
+    sledovacích dat aplikacím bez SteamVR (např. Quest standalone).
+    Ujistěte se že jste povolili OSC ve VRChat přes nabídku v menu Akcí pod OSC > Povoleno.
 settings-osc-vrchat-enable = Zapnout
 settings-osc-vrchat-enable-description = Vypnutí a zapnutí odesílání a přijímání dat.
 settings-osc-vrchat-enable-label = Zapnout
+settings-osc-vrchat-oscqueryEnabled = Povolit OSCQuery
+settings-osc-vrchat-oscqueryEnabled-label = Povolit OSCQuery
 settings-osc-vrchat-network = Síťové porty
+settings-osc-vrchat-network-description-v1 = Nastavte port pro komunikaci. Může zůstat tak jak je pro VRChat.
 settings-osc-vrchat-network-port_in =
     .label = Vstup portu
     .placeholder = Vstup portu (výchozí: 9001)
@@ -503,6 +690,7 @@ settings-osc-vrchat-network-port_out =
     .label = Výstup portu
     .placeholder = Výstup portu (výchozí: 9000)
 settings-osc-vrchat-network-address = Síťová adresa
+settings-osc-vrchat-network-address-description-v1 = Zvolte na jakou adresu zasílat data, Může zůstat nezměneno pro Vrchat.
 settings-osc-vrchat-network-address-placeholder = VRChat ip adresa
 settings-osc-vrchat-network-trackers = Trackery
 settings-osc-vrchat-network-trackers-description = Vypnuti a zapnutí odesílání konkrétních trackerů přes OSC.
@@ -515,6 +703,10 @@ settings-osc-vrchat-network-trackers-elbows = Lokty
 ## VMC OSC settings
 
 settings-osc-vmc = Virtuální snímání pohybu (Také známo jako Virtual Motion Capture)
+# This cares about multilines
+settings-osc-vmc-description =
+    Změna nastavení specificky pro VCM (Virtual Motion Capture) protokol
+        odesílat data o kostech SlimeVR a přijímat data o kostech z jiných aplikací.
 settings-osc-vmc-enable = Zapnout
 settings-osc-vmc-enable-description = Vypnutí a zapnutí odesílání a přijímání dat.
 settings-osc-vmc-enable-label = Zapnout
@@ -531,16 +723,47 @@ settings-osc-vmc-network-address-description = Vyberte, na kterou adresu odesíl
 settings-osc-vmc-network-address-placeholder = Adresa IPV4
 settings-osc-vmc-vrm = VRM Model
 settings-osc-vmc-vrm-description = Načtěte VRM model, k umožnení lepšímu sledování hlavy a zlepšení kompatibility s dalšími aplikacemi.
-settings-osc-vmc-vrm-model_unloaded = Není načten žádný model
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Model načten: { $name }
-       *[false] Načten neznámý model
-    }
+settings-osc-vmc-vrm-untitled_model = Nepojmenovaný model
 settings-osc-vmc-vrm-file_select = Přetáhněte zde model, který chcete použít, nebo <u>procházejte</u>
 settings-osc-vmc-anchor_hip = Zakotvit v bocích
 settings-osc-vmc-anchor_hip-description = Zakotvit sledování u boků, užitečné pro VTubing kde sedíte. Pokud je deaktivováno, načíst VRM model.
 settings-osc-vmc-anchor_hip-label = Zakotvit v bocích
+settings-osc-vmc-mirror_tracking = Zrcadlení sledování
+settings-osc-vmc-mirror_tracking-description = Zrcadlit trakování horizontálně.
+settings-osc-vmc-mirror_tracking-label = Zrcadlení trackování
+
+## Advanced settings
+
+settings-utils-advanced = Pokročilé
+settings-utils-advanced-reset-gui = Obnovení GUI nastavení
+settings-utils-advanced-reset-gui-description = Obnovení výchozího nastavení pro rozhraní.
+settings-utils-advanced-reset-gui-label = Obnovit GUI
+settings-utils-advanced-reset-server = Obnovení nastavení sledování
+settings-utils-advanced-reset-server-description = Obnovit výchozí nastavení pro sledovaní.
+settings-utils-advanced-reset-server-label = Obnovení sledování
+settings-utils-advanced-reset-all = Obnovit všechna nastavení
+settings-utils-advanced-reset-all-description = Obnoví výchozí nastavení pro rozhraní a sledování.
+settings-utils-advanced-reset-all-label = Obnovit vše
+settings-utils-advanced-reset_warning =
+    { $type ->
+        [gui]
+            <b>Varování:</b> Tímhle se všechna vaše nastavení GUI obnoví na výchozí hodnoty.
+            Jste si jisti že to chcete udělat?
+        [server]
+            <b>Varování:</b> Tímhle se všechna vaše nastavení Sledování obnoví na výchozí hodnoty.
+            Jste si jisti že to chcete udělat?
+       *[all]
+            <b>Varování:</b> Tímhle se všechna vaše nastavení obnoví na výchozí hodnoty.
+            Jste si jisti že to chcete udělat?
+    }
+settings-utils-advanced-reset_warning-reset = Obnovit nastavení
+settings-utils-advanced-reset_warning-cancel = Zrušit
+settings-utils-advanced-open_data-v1 = Složka s konfigurací
+settings-utils-advanced-open_data-description-v1 = Otevřít složku s konfiguračními soubory pro SlimeVR v průzkumníku souborů?
+settings-utils-advanced-open_data-label = Otevřít složku
+settings-utils-advanced-open_logs = Složka s záznamy protokolů
+settings-utils-advanced-open_logs-description = Otevřít složku s konfiguračními soubory pro SlimeVR v průzkumníku souborů?
+settings-utils-advanced-open_logs-label = Otevřít složku
 
 ## Setup/onboarding menu
 
@@ -567,6 +790,7 @@ onboarding-wifi_creds-submit = Odeslat!
 onboarding-wifi_creds-ssid =
     .label = Název Wi-Fi
     .placeholder = Zadejte název Wi-Fi
+onboarding-wifi_creds-ssid-required = Je vyžadován název sítě Wi-Fi
 onboarding-wifi_creds-password =
     .label = Heslo
     .placeholder = Zadejte heslo
@@ -611,16 +835,24 @@ onboarding-done-close = Zavřít průvodce
 
 onboarding-connect_tracker-back = Zpět na přihlašovací údaje Wi-Fi
 onboarding-connect_tracker-title = Připojení trackerů
+onboarding-connect_tracker-description-p0-v1 = A nyní k té zábavné části, Připojte trackery
+onboarding-connect_tracker-description-p1-v1 = Připojte po jednom postupně všechny tracker přes USB port.
 onboarding-connect_tracker-issue-serial = Mám potíže s připojením!
 onboarding-connect_tracker-usb = USB Tracker
 onboarding-connect_tracker-connection_status-none = Hledám trackery
 onboarding-connect_tracker-connection_status-serial_init = Připojuji se k sériovému zařízení
+onboarding-connect_tracker-connection_status-obtaining_mac_address = Získávání MAC adresy trackeru
 onboarding-connect_tracker-connection_status-provisioning = Odesílám přihlašovací údaje WiFi
 onboarding-connect_tracker-connection_status-connecting = Pokouším se připojit k WiFi
 onboarding-connect_tracker-connection_status-looking_for_server = Hledám server
 onboarding-connect_tracker-connection_status-connection_error = Nelze se připojit k síti Wi-Fi
 onboarding-connect_tracker-connection_status-could_not_find_server = Nelze najít server
 onboarding-connect_tracker-connection_status-done = Připojeno k serveru
+onboarding-connect_tracker-connection_status-no_serial_log = Nepodařilo se získat protokoly z trackeru
+onboarding-connect_tracker-connection_status-no_serial_device_found = Nepodařilo se nalézt tracker přes USB
+onboarding-connect_serial-error-modal-no_serial_log = Je tracker zapnutý?
+onboarding-connect_serial-error-modal-no_serial_log-desc = Ujistěte se, že je tracker zapnutý a připojený k vašemu počátači
+onboarding-connect_serial-error-modal-no_serial_device_found = Nebyly nalezeny žádné trackery
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -645,6 +877,7 @@ onboarding-calibration_tutorial-status-waiting = Čekám na tebe
 onboarding-calibration_tutorial-status-calibrating = Kalibruji
 onboarding-calibration_tutorial-status-success = Super!
 onboarding-calibration_tutorial-status-error = Trackerem bylo pohnuto.
+onboarding-calibration_tutorial-skip = Přeskočit návod
 
 ## Tracker assignment tutorial
 
@@ -673,6 +906,22 @@ onboarding-assign_trackers-assigned =
 onboarding-assign_trackers-advanced = Zobrazit pokročilá místa na přiřazení trackerů
 onboarding-assign_trackers-next = Přiřadil jsem všechny trackery
 onboarding-assign_trackers-mirror_view = Zrcadlit náhled
+onboarding-assign_trackers-option-label =
+    { $mode ->
+        [lower-body] Spodní část těla
+        [core] Základ
+        [enhanced-core] Vylepšený základ
+        [full-body] Celé tělo
+       *[all] Všechny trackery
+    }
+onboarding-assign_trackers-option-description =
+    { $mode ->
+        [lower-body] Minimum pro sledování celého těla ve VR
+        [core] + Vylepšené sledování páteře
+        [enhanced-core] + Rotace chodidel
+        [full-body] + Sledování loktů
+       *[all] Přrazení všech dostupný trackerů
+    }
 
 ## Tracker assignment warnings
 
@@ -696,8 +945,12 @@ onboarding-choose_mounting = Jakou metodu nasazení trackerů použít?
 # Multiline text
 onboarding-choose_mounting-description = Správná orientace nasazení zajistí přesné sledování trackerů na těle.
 onboarding-choose_mounting-auto_mounting = Automatická detekce nasazení
+# Italicized text
+onboarding-choose_mounting-auto_mounting-label-v2 = Doporučeno
 onboarding-choose_mounting-auto_mounting-description = Orientace nasazení všech trackerů bude automaticky rozpoznána ze 2 pozic.
 onboarding-choose_mounting-manual_mounting = Manuální nastavení
+# Italicized text
+onboarding-choose_mounting-manual_mounting-label-v2 = Nemusí být dostatečně přesné
 onboarding-choose_mounting-manual_mounting-description = Ručně zadejte orientaci nasazení každého trackeru.
 # Multiline text
 onboarding-choose_mounting-manual_modal-title =
@@ -730,44 +983,25 @@ onboarding-automatic_mounting-mounting_reset-title = Reset nasazení trackerů
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Dřepněte si, jako při lyžování: nohy pokrčte v kolenou, trup nakloňte mírně dopředu a paže pokrčte.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Stiskněte tlačítko "Resetovat nasazení trackerů" a  vyčkejte 3 sekundy. Orientace nasazení trackerů se nastaví na základní hodnoty.
 onboarding-automatic_mounting-preparation-title = Příprava
-onboarding-automatic_mounting-preparation-step-0 = 1. Postavte se vzpřímeně s rukama na bocích.
-onboarding-automatic_mounting-preparation-step-1 = 2. Stiskněte tlačítko "Reset" a počkejte 3 sekundy, než se trackery resetují.
+onboarding-automatic_mounting-preparation-v2-step-0 = 1. Stiskněte tlačítko pro "Plný Reset"
 onboarding-automatic_mounting-put_trackers_on-title = Nasaďte si trackery
 onboarding-automatic_mounting-put_trackers_on-description = Pro kalibraci směru nasazení použijeme právě přiřazené trackery. Nasaďte si prosím všechny trackery. Můžete zkontrolovat jejich umístění na obrázku vpravo.
 onboarding-automatic_mounting-put_trackers_on-next = Mám nasazené všechny trackery
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = Jakou metodu kalibrace chcete použít?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    Proporce těla potřebujeme, abychom dobře změřili tvoje pohyby. Trackerům totiž pomáhají zjistit, kde přesně se na těle nachází.
-    Když jsou proporce nastaveny špatně, sledování nebude fungovat dobře. Může to způsobit efekt kde tvůj avatar divně klouže, nebo že se divně hýbe.
-    <b>Proporce stačí změřit jednou a máš to vyřešené!</b> Pokud nezměníš výrazně postavu nebo to napoprvé nedopadne dobře, nemusíš už nic měřit.
-onboarding-choose_proportions-auto_proportions = Automatická detekce proporcí
-# Italized text
-onboarding-choose_proportions-auto_proportions-subtitle = Doporučeno
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Toto odhadne vaše proporce z krátkého záznamu vašich pohybů pomocí speciálního algoritmu.
-    
-    <b>K tomu JE NUTNÉ mít VR headset připojený k SlimeVR a nasazený na hlavě!</b>
-onboarding-choose_proportions-manual_proportions = Manuální nastavení proporcí
-# Italized text
-onboarding-choose_proportions-manual_proportions-subtitle = Pro drobné úpravy
-onboarding-choose_proportions-manual_proportions-description = Nastavte si vaše proporce ručně dle vašich potřeb.
-onboarding-choose_proportions-export = Exportovat proporce
-onboarding-choose_proportions-import = Importovat proporce
-onboarding-choose_proportions-import-success = Importováno!
-onboarding-choose_proportions-import-failed = Import byl neúspěšný
-onboarding-choose_proportions-file_type = Soubor tělesných proporcí
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Zpět na tutoriál
 onboarding-manual_proportions-title = Manuální proporce těla
-onboarding-manual_proportions-precision = Přesná úprava
-onboarding-manual_proportions-auto = Automatická kalibrace proporcí
-onboarding-manual_proportions-ratio = Upravit podle poměrů končetin
+onboarding-manual_proportions-fine_tuning_button = Automatické jemné doladění proporcí
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Pro použití automatického jemného lazení, prosím připojte VR headset
+onboarding-manual_proportions-export = Exportovat proporce
+onboarding-manual_proportions-import = Importovat proporce
+onboarding-manual_proportions-file_type = Soubor tělesných proporcí
+onboarding-manual_proportions-normal_increment = Normální škála
+onboarding-manual_proportions-precise_increment = Přesná škála
+onboarding-manual_proportions-grouped_proportions = Skupinové proporce
+onboarding-manual_proportions-all_proportions = Všechny proporce
+onboarding-manual_proportions-estimated_height = Odhadovaná výška uživatele
 
 ## Tracker automatic proportions setup
 
@@ -788,18 +1022,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     SteamVR a SlimeVR: Headset odesílá pozici do serveru SlimeVR (obvykle je potřeba mít spuštěný SteamVR a připojený k SlimeVR pomocí ovladače SlimeVR pro SteamVR).
     Přesné sledování: Sledování funguje a přesně zaznamenává vaše pohyby (například jste provedli kompletní reset a trackery se správně pohybují při kopání, předklonu, sezení apod.).
 onboarding-automatic_proportions-requirements-next = Přečetl jsem si požadavky
-onboarding-automatic_proportions-check_height-title = Ujistěte se, že máte správnou výšku
-onboarding-automatic_proportions-check_height-description = Vaši výšku využíváme jako základ pro měření pohybů. Pro přibližné zjištění výšky používáme výšku vašeho VR headsetu, ale je přesnější, když si svoji skutečnou výšku zadáte sami!
+onboarding-automatic_proportions-check_height-title-v3 = Měření výšky vašeho headsetu
+onboarding-automatic_proportions-check_height-description-v2 = Váš headset HMD výška by měla být o trochu menší než vaše celá výška, protože headset měří výšku úrovně vašich očí. Toto měření bude použito pro výchozí hodnoty vaších tělesných proporcí.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Pro změření výšky stiskněte tlačítko <u>ve vzpřímeném postoji.</u> Máte na to 3 sekundy od stisknutí!
-onboarding-automatic_proportions-check_height-fetch_height = Stojím vzpřímeně!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Započněte měření při tom když stojíte <u>vzpřímeně</u> aby jste změřili vaší výšku. Dávejte pozor aby jste nezvedly vaše ruce nad váš headset, mohlo by to ovlivnit výsledky měření!
+onboarding-automatic_proportions-check_height-guardian_tip =
+    Pokud používáte Samostatný VR headset, ujistěte se že váš opatrovník /
+    Hranice zapnutá aby byla vaše výška správně!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Neznámá
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = Výška vašeho headsetu je
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = takže vaše výška by měla být
+onboarding-automatic_proportions-check_height-hmd_height2 = Výška vašeho headsetu je:
+onboarding-automatic_proportions-check_height-measure-start = Zahájit měření
+onboarding-automatic_proportions-check_height-measure-stop = Ukončit měření
+onboarding-automatic_proportions-check_height-measure-reset = Opakovat měření
 onboarding-automatic_proportions-check_height-next_step = Je to v pořádku!
+onboarding-automatic_proportions-check_floor_height-title = Změřte vaší výšku podlahy (dobrovolné)
+onboarding-automatic_proportions-check_floor_height-description = V některých případech, výška vaší podlahy nemusí být správně nastavena vaším headsetem, což způsobí že výška headsetu bude zaznamenána víš než by měla být. Můžete změřit "výšku" vaší podlahy aby jste opravily výšku vašeho headsetu
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Začněte s měřením a přiložte ovladač proti vaší podlaze pro změření její výšky. pokud jste si jistí že výška podlahy je správně nastavená, můžete tento krok přeskočit
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = Výška vaší podlahy je:
+onboarding-automatic_proportions-check_floor_height-full_height = Vaše odhadnutá celá výška je:
+onboarding-automatic_proportions-check_floor_height-measure-start = Zahájit měření
+onboarding-automatic_proportions-check_floor_height-measure-stop = Ukončit měření
+onboarding-automatic_proportions-check_floor_height-measure-reset = Opakovat měření
+onboarding-automatic_proportions-check_floor_height-skip_step = Přeskočit krok a uložit
+onboarding-automatic_proportions-check_floor_height-next_step = Použít výšku podlahy a uložit
 onboarding-automatic_proportions-start_recording-title = Připravte se hýbat
 onboarding-automatic_proportions-start_recording-description = Připravte se na nahrání několika póz a pohybů. Dostanete přesné instrukce na další obrazovce. Až budete připraveni, stiskněte tlačítko a začněte!
 onboarding-automatic_proportions-start_recording-next = Spustit nahrávání
@@ -830,8 +1079,57 @@ onboarding-automatic_proportions-verify_results-redo = Znovu provést záznam
 onboarding-automatic_proportions-verify_results-confirm = Jsou správné
 onboarding-automatic_proportions-done-title = Tělo změřeno a uloženo.
 onboarding-automatic_proportions-done-description = Kalibrace proporcí vašeho těla je dokončena!
-onboarding-automatic_proportions-error_modal = <b>Chyba:</b> Při odhadování proporcí došlo k chybě! Prosím, přečtěte si <docs>dokumentaci</docs> nebo se připojte k našemu serveru <discord>Discord</discord> a požádejte o pomoc ^_^
+onboarding-automatic_proportions-error_modal-v2 =
+    <b>Varování:</b> Nastala chyba při odhadu proporcí!
+    Pravděpodobně jde o nesprávnou kalibraci umístění trackerů. Ujistěte se že vaše sledování funguje správě než to zkusíte znovu.
+    Prosím <docs>Zkontrolujte dokumentaci</docs> nebo se připojte na náš <discord>Discord server</discord> a požádejte o pomoc ^_^
 onboarding-automatic_proportions-error_modal-confirm = Rozumím!
+onboarding-automatic_proportions-smol_warning =
+    Vaše nakonfigurovaná výška { $height } je menší než minimální přijatelná výška { $minHeight }.
+    <b>Proveďte prosím přeměření a ujistěte se, že jsou hodnoty správné.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Jít zpět
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = Škálované proporce
+onboarding-scaled_proportions-description = Aby trackery SlimeVR fungovaly, potřebujeme znát délku vašich kostí. Tímto se použije průměrný poměr a měřítko na základě vaší výšky.
+onboarding-scaled_proportions-manual_height-title = Nakonfigurovat vaší výšku
+onboarding-scaled_proportions-manual_height-description-v2 = Tato výška bude použita jak zaklad pro vaše tělesné proporce.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR není momentálně připojen k SlimeVR, takže měření nemůže být založeno na vašem headsetu. <b>Pokračujte na vlastní nebezpečí nebo se podívejte do dokumentace!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = Vaše celková výška je
+onboarding-scaled_proportions-manual_height-estimated_height = Vaše odhadovaná výška headsetu je:
+onboarding-scaled_proportions-manual_height-next_step = Uložit a pokračovat
+onboarding-scaled_proportions-manual_height-warning =
+    Právě používáte manuální způsob nastavení škálování proporcí!
+    <b>Tento režim je doporučen pouze pokud nepoužíváte HMD s SlimeVR</b>
+    
+    Abyste mohli používat automatcky škálované proporce, prosím:
+onboarding-scaled_proportions-manual_height-warning-no_hmd = Připojte VR headset
+onboarding-scaled_proportions-manual_height-warning-no_controllers = Ujistěte se, že jsou vaše ovladače připojeny a správně přirazeny k vaším rukám
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = Obnovení proporcí vašeho těla
+onboarding-scaled_proportions-reset_proportion-description = Chcete-li nastavit tělesné proporce podle vaší výšky, předem musíte obnovit všechny vaše proporce. Tato operace obnoví všechny proporce, které jste nakonfigurovali. a následně se obnoví výchozí konfigurace.
+onboarding-scaled_proportions-done-title = Proporce těla byla nastavena
+onboarding-scaled_proportions-done-description = Vaše proporce těla by teď měli být nakonfigurovány na základě vaší výšky.
+
+## Stay Aligned setup
+
+onboarding-stay_aligned-title = Zůstaň Srovaný!
+onboarding-stay_aligned-description = Nakonfigurujte Zustaň Srovnaný, aby byly vaše trackery srovnáný.
+onboarding-stay_aligned-put_trackers_on-title = Nasaďte si trackery
+onboarding-stay_aligned-put_trackers_on-next = Mám nasazené všechny trackery
+onboarding-stay_aligned-verify_mounting-title = Zkotrolujte nasazení
+onboarding-stay_aligned-verify_mounting-step-1 = 1. Pohybujte se ve stoje.
+onboarding-stay_aligned-verify_mounting-step-2 = 2. Posaďte se a pohybujte nohama a chodidly.
+onboarding-stay_aligned-relaxed_poses-standing-step-0 = 1. Stůjte v pohodlné pozici. Relaxujte!
+onboarding-stay_aligned-relaxed_poses-skip_step = Přeskočit
+onboarding-stay_aligned-done-title = Zustaň Srovnaný zapnuto!
+onboarding-stay_aligned-previous_step = Předchozí
+onboarding-stay_aligned-next_step = Další
+onboarding-stay_aligned-restart = Restart
+onboarding-stay_aligned-done = Hotovo
 
 ## Home
 
@@ -855,6 +1153,148 @@ status_system-StatusSteamVRDisconnected =
        *[steamvr] Nejste připojeni ke SteamVR zapomocí ovladače SlimeVR.
     }
 status_system-StatusTrackerError = Tracker { $trackerName } není v pořádku.
+status_system-StatusUnassignedHMD = Váš VR Headset by měl být přiřazen jako tracker hlavy.
+
+## Firmware tool globals
+
+firmware_tool-next_step = Další krok
+firmware_tool-previous_step = Předchozí krok
+firmware_tool-ok = Vypadá to dobře
+firmware_tool-retry = Zkusit znovu
+firmware_tool-loading = Načítání...
+
+## Firmware tool Steps
+
+firmware_tool = Nástroj pro DIY firmwere
+firmware_tool-description = Umožní vám konfigurovat a flashovat vaše DIY trackery
+firmware_tool-not_available = Jejda, nástroj pro firmware není v momentální chvíli k dispozici, Vraťte se později!
+firmware_tool-not_compatible = Nástroj pro firmware není kompatibilní s touhle verzí serveru. Aktualizujte prosím svůj server.
+firmware_tool-board_step = Vyberte vaší desku
+firmware_tool-board_step-description = Vyberte jednu z desek uvedené níže.
+firmware_tool-board_pins_step = Zkontrolujte piny
+firmware_tool-board_pins_step-description =
+    Porsím ujistěte se že zvolené piny jsou správně.
+    Jestli jste postupovaly podle SlimeVR dokumentace, tak by měli být výchozí hodnoty správně
+firmware_tool-board_pins_step-enable_led = Povolit LED
+firmware_tool-board_pins_step-led_pin =
+    .label = LED pin
+    .placeholder = Vložte adresu pinu LED
+firmware_tool-board_pins_step-battery_type = Vyberte typ baterie
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Externí baterie
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Interní baterie
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = Vnitřní MCP3021
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = Pin snímače baterie
+    .placeholder = Vložte adresu pinu na kterém je připojen snímač baterie
+firmware_tool-board_pins_step-battery_resistor =
+    .label = Odpor baterie (Ohmy)
+    .placeholder = Vložte hodnotu rezistoru baterie
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = Štít baterie R1 (v Ohmech)
+    .placeholder = Vložte hodnotu štítu baterie R1
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = Štít baterie R2 (v Ohmech)
+    .placeholder = Vložte hodnotu štítu baterie R2
+firmware_tool-add_imus_step = Deklarujte své IMU
+firmware_tool-add_imus_step-description =
+    Prosím přidejte IMU které má váš tracker
+    Pokud jste následovali dokumentaci SlimeVR, výchozí hodnoty by měli být správné
+firmware_tool-add_imus_step-imu_type-label = Typ IMU
+firmware_tool-add_imus_step-imu_type-placeholder = Vyberte typ IMU
+firmware_tool-add_imus_step-imu_rotation =
+    .label = Rotace IMU (stupně)
+    .placeholder = Úhel rotace IMU
+firmware_tool-add_imus_step-scl_pin =
+    .label = SCL Pin
+    .placeholder = Adresa SCL pinu
+firmware_tool-add_imus_step-sda_pin =
+    .label = SDA Pin
+    .placeholder = Adresa pinu SDA
+firmware_tool-add_imus_step-int_pin =
+    .label = INT Pin
+    .placeholder = Adresa pinu INT
+firmware_tool-add_imus_step-optional_tracker =
+    .label = Nepovinné trackery
+firmware_tool-add_imus_step-show_less = Zobrazit měné
+firmware_tool-add_imus_step-show_more = Zobrazit více
+firmware_tool-add_imus_step-add_more = Přidat další IMU
+firmware_tool-select_firmware_step = Vyberte verzi firmwaru
+firmware_tool-select_firmware_step-description = Prosím zvolte, jakou verzi firmwaru chcete použít
+firmware_tool-select_firmware_step-show-third-party =
+    .label = Zobrazit firmware třetích stran
+firmware_tool-flash_method_step = Metoda flashování
+firmware_tool-flash_method_step-description = Prosím zvolte metodu flashování, kterou chcete použít
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Použití metody "Over The Air" přenos přes vzduch. Vaše trackery použijí Wi-Fi pro aktualizaci jejich firmweru. Metoda funguje pouze na již nastavených a nakonfigorovaných trackerech.
+firmware_tool-flash_method_step-serial =
+    .label = Sériový
+    .description = Použíte USB kabel pro aktualizování vaších trackerů.
+firmware_tool-flashbtn_step = Stiskněte tlačítko bootu btn
+firmware_tool-flashbtn_step-description = Než přejdeme na další krok, je tady pár věcí které musíte udělat
+firmware_tool-flashbtn_step-board_SLIMEVR = Vypněte tracker, vyndejte z obalu (jestli v nějakém je), Připojte USB kabel k tomuto počítači a poté následujte jeden z kroků revize odpovídající k vaší verzi desky trackeru SlimeVR:
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Zapněte tracker při tom co spojujete (zkratujete) obdelníkovou podložku FLASH z okraje na vrchní straně desky trackeru, a kovového obalu microkontroleru
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Zapněte tracker při spojování (zkratování) kruhové FLASH podložky na vrchní straně desky trackeru, a kovového štítu microkontrolleru
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Zapněte tracker při držení tlačítka FLASH na vrchní straně desky trackeru
+firmware_tool-flashbtn_step-board_OTHER =
+    Před flashováním, pravděpodobně budete muset přepnout tracker do bootloader režimu.
+    Ve většině případů to znamená stisknutí boot tlačítka na desce trakeru před tím než začne proces flashování.
+    Pokud procesu flashování vyprší čas hned na začátku flashování, to nejspíš znamená že tracker nebyl v řežimu bootloaderu
+    Podívejte se prosím na instrukce procesu flashování pro desku vašeho zařízení, aby jste zjistili jak se dostat do režimu bootloaderu
+firmware_tool-flash_method_ota-devices = Byla detekována zařízení s OTA:
+firmware_tool-flash_method_ota-no_devices = Nebyly nalezeny žádné zákadní desky které by mohly být aktualizované pomocí OTA, prosím ujistěte se že jste zvolily správný typ základní desky
+firmware_tool-flash_method_serial-wifi = Přihlašovací údaje Wi-Fi:
+firmware_tool-flash_method_serial-devices-label = Detekována Sériová Zařízení:
+firmware_tool-flash_method_serial-devices-placeholder = Vyberte sériové zařízení
+firmware_tool-flash_method_serial-no_devices = Nebyla nalezena žádná kompatibilní seriová zařízení, prosím ujistěte se že trackery jsou připojeny
+firmware_tool-build_step = Sestavování
+firmware_tool-build_step-description = Firmwere se sestavuje, čekejte prosím
+firmware_tool-flashing_step = Flashování
+firmware_tool-flashing_step-description = Probíhá flashování vašich trackerů, prosím postupujte dle instrukcí na obrazovce
+firmware_tool-flashing_step-flash_more = Flashnout více trackerů
+firmware_tool-flashing_step-exit = Odejít
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = Vytváření složky pro sestavení
+firmware_tool-build-DOWNLOADING_FIRMWARE = Stahování firmweru
+firmware_tool-build-EXTRACTING_FIRMWARE = Extrahování firmweru
+firmware_tool-build-SETTING_UP_DEFINES = Konfigurování definicí
+firmware_tool-build-BUILDING = Sestavování firmweru
+firmware_tool-build-SAVING = Ukládání sestavení
+firmware_tool-build-DONE = Sestavení dokončeno
+firmware_tool-build-ERROR = Nepodařilo se sestavit firmwere
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = Stahování firmwaru
+firmware_update-status-AUTHENTICATING = Autentifikování s mcu
+firmware_update-status-UPLOADING = Nahrávání firmwaru
+firmware_update-status-SYNCING_WITH_MCU = Synchronizace s MCU
+firmware_update-status-REBOOTING = Restartování trackeru
+firmware_update-status-PROVISIONING = Nastavování přihlašovacích údajů pro síť Wi-Fi
+firmware_update-status-DONE = Aktualizace byla dokončena!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = Zařízení se nepodařilo nalézt
+firmware_update-status-ERROR_TIMEOUT = Vypršel časový limit pro proces aktualizace
+firmware_update-status-ERROR_DOWNLOAD_FAILED = Nepodařilo se stáhnout firmware
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = Ověření MCU se nezdařilo
+firmware_update-status-ERROR_UPLOAD_FAILED = Nepodařilo se nahrát firmware
+firmware_update-status-ERROR_PROVISIONING_FAILED = Nepodařilo se nastavit přihlašovací údaje pro Wi-Fi
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = Metoda aktualizace není podporována
+firmware_update-status-ERROR_UNKNOWN = Neznámá chyba
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = Aktualizace firmwaru
+firmware_update-devices = Dostupná zařízení
+firmware_update-devices-description = Prosím zvolte tracker, který chcete aktualizovat na nejnovější verzi SlimeVR firmwaru
+firmware_update-no_devices = Prosím ujistěte se, že tracker který chcete aktualizovat je ZAPNUTO a připojeno k Wi-Fi!
+firmware_update-changelog-title = Aktualizování na { $version }
+firmware_update-looking_for_devices = Hledání zařízení pro aktualizaci
+firmware_update-retry = Opakovat
+firmware_update-update = Aktualizovat Zvolený/é Tracker/y
+firmware_update-exit = Odejít
 
 ## Tray Menu
 
@@ -877,5 +1317,53 @@ tray_or_exit_modal-cancel = Zrušit
 
 ## Unknown device modal
 
+unknown_device-modal-title = Byl nalezen nový tracker!
+unknown_device-modal-description =
+    Byl objeven nový tracker s MAC adresou <b>{ $deviceId }</b>.
+    Chcete jej připojit k SlimeVR?
 unknown_device-modal-confirm = Jasně!
 unknown_device-modal-forget = Ignoruj
+vrc_config-page-help = Nemůžete najít specifické nastavení?
+vrc_config-page-big_menu = Sledování & IK (Velké Menu)
+vrc_config-page-big_menu-desc = Nastavení souvicející s IK ve velké nabídce nastavení
+vrc_config-page-wrist_menu = Sledování & IK (Zápěstní menu)
+vrc_config-on = Zapnuto
+vrc_config-off = Vypnuto
+vrc_config-invalid = Máte špatně nakonfigurované VRChat nastavení!
+vrc_config-show_more = Ukázat více
+vrc_config-setting_name = Jméno nastavení v VRChat
+vrc_config-recommended_value = Doporučená hodnota
+vrc_config-current_value = Aktuální hodnota
+vrc_config-mute = Upozornění na ztlumení
+vrc_config-mute-btn = Ztlumení
+vrc_config-unmute-btn = Zrušit ztlumení
+vrc_config-legacy_mode = Použít starší řešení IK
+vrc_config-disable_shoulder_tracking = Vypnout sledování ramen
+vrc_config-spine_mode = Režim páteře FTB
+vrc_config-tracker_model = Model FBT trackeru
+vrc_config-avatar_measurement_type = Meření avataru
+vrc_config-calibration_range = Kalibrační rozsah
+vrc_config-calibration_visuals = Zobrazit vizualizaci kalibrace
+vrc_config-user_height = Reálná výška uživatele
+vrc_config-spine_mode-UNKNOWN = Neznámý
+vrc_config-spine_mode-LOCK_BOTH = Uzamknout obojí
+vrc_config-spine_mode-LOCK_HEAD = Uzamknout hlavu
+vrc_config-spine_mode-LOCK_HIP = Uzamknout boky
+vrc_config-tracker_model-UNKNOWN = Neznýmý
+vrc_config-tracker_model-AXIS = Osy
+vrc_config-tracker_model-BOX = Box
+vrc_config-tracker_model-SPHERE = Sféra
+vrc_config-tracker_model-SYSTEM = Systém
+vrc_config-avatar_measurement_type-UNKNOWN = Neznámý
+vrc_config-avatar_measurement_type-HEIGHT = Výška
+vrc_config-avatar_measurement_type-ARM_SPAN = Rozpětí paží
+
+## Error collection consent modal
+
+error_collection_modal-title = Můžeme sbírat chyby?
+error_collection_modal-description_v2 =
+    { settings-interface-behavior-error_tracking-description_v2 }
+    
+    Tohle lze později změnit v sekci Chování v nastavení.
+error_collection_modal-confirm = Souhlasím
+error_collection_modal-cancel = Nesouhlasím

gui/public/i18n/de/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Verbindung zum Server wird hergestellt...
 websocket-connection_lost = Verbindung zum Server verloren. Versuche Verbindung wiederherzustellen ...
+websocket-connection_lost-desc = Es sieht so aus, als wäre der SlimeVR-Server abgestürzt. Überprüfen Sie die Protokolle und starten Sie das Programm neu.
+websocket-timedout = Es konnte keine Verbindung zum Server hergestellt werden.
+websocket-timedout-desc = Es sieht so aus, als ob der SlimeVR-Server abgestürzt ist oder nicht rechtzeitig geantwortet hat. Überprüfen Sie die Protokolle und starten Sie das Programm neu.
+websocket-error-close = SlimeVR beenden
+websocket-error-logs = Öffne den Logs-Ordner
 
 ## Update notification
 
@@ -49,6 +54,58 @@ body_part-LEFT_HAND = Linke Hand
 body_part-LEFT_UPPER_LEG = Linker Oberschenkel
 body_part-LEFT_LOWER_LEG = Linker Knöchel
 body_part-LEFT_FOOT = Linker Fuß
+body_part-LEFT_THUMB_METACARPAL = Linker Daumen-Mittelhandknochen
+body_part-LEFT_THUMB_PROXIMAL = Linkes Daumengrundglied
+body_part-LEFT_THUMB_DISTAL = Linkes Daumenendglied
+body_part-LEFT_INDEX_PROXIMAL = Linkes Zeigefinger-Grundglied
+body_part-LEFT_INDEX_INTERMEDIATE = Linkes Zeigefinger-Mittelglied
+body_part-LEFT_INDEX_DISTAL = Linkes Zeigefinger-Endglied
+body_part-LEFT_MIDDLE_PROXIMAL = Linkes Mittelfinger-Grundglied
+body_part-LEFT_MIDDLE_INTERMEDIATE = Linkes Mittelfinger-Mittelglied
+body_part-LEFT_MIDDLE_DISTAL = Linkes Mittelfinger-Endglied
+body_part-LEFT_RING_PROXIMAL = Linkes Ringfinger-Grundglied
+body_part-LEFT_RING_INTERMEDIATE = Linkes Ringfinger-Mittelglied
+body_part-LEFT_RING_DISTAL = Linkes Ringfinger-Endglied
+body_part-LEFT_LITTLE_PROXIMAL = Linkes Kleinfinger-Grundglied
+body_part-LEFT_LITTLE_INTERMEDIATE = Linkes Kleinfinger-Mittelglied
+body_part-LEFT_LITTLE_DISTAL = Linkes Kleinfinger-Endglied
+body_part-RIGHT_THUMB_METACARPAL = Rechter Daumen-Mittelhandknochen
+body_part-RIGHT_THUMB_PROXIMAL = Rechtes Daumengrundglied
+body_part-RIGHT_THUMB_DISTAL = Rechtes Daumenendglied
+body_part-RIGHT_INDEX_PROXIMAL = Rechtes Zeigefinger-Grundglied
+body_part-RIGHT_INDEX_INTERMEDIATE = Rechtes Zeigefinger-Mittelglied
+body_part-RIGHT_INDEX_DISTAL = Rechtes Zeigefinger-Endglied
+body_part-RIGHT_MIDDLE_PROXIMAL = Rechtes Mittelfinger-Grundglied
+body_part-RIGHT_MIDDLE_INTERMEDIATE = Rechtes Mittelfinger-Mittelglied
+body_part-RIGHT_MIDDLE_DISTAL = Rechtes Mittelfinger-Endglied
+body_part-RIGHT_RING_PROXIMAL = Rechtes Ringfinger-Grundglied
+body_part-RIGHT_RING_INTERMEDIATE = Rechtes Ringfinger-Mittelglied
+body_part-RIGHT_RING_DISTAL = Rechtes Ringfinger-Endglied
+body_part-RIGHT_LITTLE_PROXIMAL = Rechtes Kleinfinger-Grundglied
+body_part-RIGHT_LITTLE_INTERMEDIATE = Rechtes Kleinfinger-Mittelglied
+body_part-RIGHT_LITTLE_DISTAL = Rechtes Kleinfinger-Endglied
+
+## BoardType
+
+board_type-UNKNOWN = Unbekannt
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Benutzerdefiniertes Board
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev-IMU-Handschuh
 
 ## Proportions
 
@@ -81,11 +138,14 @@ skeleton_bone-ELBOW_OFFSET = Ellbogenversatz
 ## Tracker reset buttons
 
 reset-reset_all = Alle Proportionen zurücksetzen
-reset-reset_all_warning =
-    <b>Achtung:</b> Die Proportionen werden zurückgesetzt und auf Basis ihrer Körpergröße neu berechnet.
-    Sind sie sich sicher?
+reset-reset_all_warning-v2 =
+    <b>Warnung:</b>Ihre Proportionen werden auf die Standardwerte zurückgesetzt und entsprechend Ihrer konfigurierten Körpergröße skaliert.
+    Möchten Sie dies wirklich tun?
 reset-reset_all_warning-reset = Proportionen zurücksetzen
 reset-reset_all_warning-cancel = Abbrechen
+reset-reset_all_warning_default-v2 =
+    <b>Warnung:</b> Ihre Körpergröße wurde nicht konfiguriert. Ihre Proportionen werden auf die Standardwerte mit der Standardgröße zurückgesetzt.
+    Möchten Sie dies wirklich tun?
 reset-full = Reset
 reset-mounting = Befestigungs-Reset
 reset-yaw = Horizontaler Reset
@@ -103,7 +163,7 @@ serial_detection-close = Schließen
 ## Navigation bar
 
 navbar-home = Start
-navbar-body_proportions = Körpermaße
+navbar-body_proportions = Körperproportionen
 navbar-trackers_assign = Tracker-Zuordnung
 navbar-mounting = Tracker-Ausrichtung
 navbar-onboarding = Einrichtungs-Assistent
@@ -204,6 +264,7 @@ tracker-infos-url = Tracker-Adresse
 tracker-infos-version = Firmware-Version
 tracker-infos-hardware_rev = Hardware-Version
 tracker-infos-hardware_identifier = Hardware-ID
+tracker-infos-data_support = Daten-Support
 tracker-infos-imu = IMU-Sensor
 tracker-infos-board_type = Platine
 tracker-infos-network_version = Protokoll Version
@@ -244,6 +305,12 @@ tracker-settings-name_section-label = Trackername
 tracker-settings-forget = Tracker Vergessen
 tracker-settings-forget-description = Entfernt den Tracker vom SlimeVR Server und verhindert, dass er sich wieder verbindet, bis der Server neu gestartet wurde. Die Konfiguration des Trackers geht nicht verloren.
 tracker-settings-forget-label = Tracker Vergessen
+tracker-settings-update-unavailable = Kann nicht aktualisiert werden (DIY)
+tracker-settings-update-low-battery = Aktualisierung nicht möglich. Akku unter 50 %
+tracker-settings-update-up_to_date = Auf dem neusten Stand
+tracker-settings-update-available = { $versionName } ist jetzt Verfügbar
+tracker-settings-update = Jetzt aktualisieren
+tracker-settings-update-title = Firmware-Version
 
 ## Tracker part card info
 
@@ -319,6 +386,8 @@ settings-sidebar-utils = Werkzeuge
 settings-sidebar-serial = Serielle Konsole
 settings-sidebar-appearance = Erscheinungsbild
 settings-sidebar-notifications = Benachrichtigungen
+settings-sidebar-behavior = Verhalten
+settings-sidebar-firmware-tool = DIY Firmware-Tool
 settings-sidebar-advanced = Erweitert
 
 ## SteamVR settings
@@ -423,6 +492,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = Fußkorrektur ri
 settings-general-fk_settings-leg_fk = Beintracking
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Aktiviert das Zurücksetzen der Fußausrichtung, indem Sie auf die Zehenspitzen stehen.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Fußausrichtung zurücksetzen
+settings-general-fk_settings-enforce_joint_constraints = Gelenkgrenzen
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Grenzen erzwingen
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Verhindert, dass sich Gelenke über ihre Grenzen hinaus drehen
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Mit Grenzen korrigieren
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Korrigiert Gelenkrotationen, wenn diese über ihre Grenzen hinausgehen
 settings-general-fk_settings-arm_fk = Arm-Tracking
 settings-general-fk_settings-arm_fk-description = Ändern Sie die Art und Weise, wie die Arme berechnet werden.
 settings-general-fk_settings-arm_fk-force_arms = Arme vom VR-Headset erzwingen
@@ -454,9 +528,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Inter
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Interpolation der horizontalen und Torsionsrotationen der Knie mit denen der Fußgelenke
 settings-general-fk_settings-self_localization-title = Motion-Capture-Modus
 settings-general-fk_settings-self_localization-description = Der Motion-Capture-Modus ermöglicht es dem Skelett, ungefähr die eigene Position ohne Headset oder Tracker zu verfolgen. Beachten Sie, dass diese Funktion Fuß- und Kopf-Tracker benötigt und noch experimentell ist.
-settings-general-fk_settings-vive_emulation-title = Vive-Simulierung
-settings-general-fk_settings-vive_emulation-description = Simuliere die Tracking-Probleme, welche bei Vive-Trackern auftreten. Dies ist ein Scherz und verschlechtert das Tracking.
-settings-general-fk_settings-vive_emulation-label = Vive-Simulierung
 
 ## Gesture control settings (tracker tapping)
 
@@ -493,9 +564,6 @@ settings-general-gesture_control-numberTrackersOverThreshold-description = Erhö
 ## Appearance settings
 
 settings-interface-appearance = Erscheinungsbild
-settings-general-interface-dev_mode = Entwicklermodus
-settings-general-interface-dev_mode-description = Der Entwicklermodus stellt mehr Daten dar und erlaubt auch erweiterte Einstellungen, so wie erweiterte Optionen bei verbundenen Trackern.
-settings-general-interface-dev_mode-label = Entwicklermodus
 settings-general-interface-theme = Farbschema
 settings-general-interface-show-navbar-onboarding = "{ navbar-onboarding }" in der Navigationsleiste anzeigen
 settings-general-interface-show-navbar-onboarding-description = Dies ändert die Sichtbarkeit der Schaltfläche "{ navbar-onboarding }" in der Navigationsleiste
@@ -528,6 +596,13 @@ settings-general-interface-feedback_sound-volume = Feedback-Sound-Lautstärke
 settings-general-interface-connected_trackers_warning = Warnung zu verbundenen Trackern
 settings-general-interface-connected_trackers_warning-description = Diese Option zeigt jedes Mal ein Pop-up-Fenster an, wenn Sie versuchen, SlimeVR zu beenden, während ein oder mehrere Tracker verbunden sind. Es erinnert Sie daran, die Tracker auszuschalten, um die Akkulaufzeit zu verlängern.
 settings-general-interface-connected_trackers_warning-label = Warnung vor verbundenen Trackern beim Verlassen
+
+## Behavior settings
+
+settings-interface-behavior = Verhalten
+settings-general-interface-dev_mode = Entwicklermodus
+settings-general-interface-dev_mode-description = Der Entwicklermodus stellt mehr Daten dar und erlaubt auch erweiterte Einstellungen, so wie erweiterte Optionen bei verbundenen Trackern.
+settings-general-interface-dev_mode-label = Entwicklermodus
 settings-general-interface-use_tray = In den Infobereich minimieren
 settings-general-interface-use_tray-description = Erlaubt Ihnen, das Fenster zu schließen, ohne den SlimeVR-Server zu beenden. Dies erlaubt Ihnen diesen weiterzuverwenden, ohne dass das Fenster stört.
 settings-general-interface-use_tray-label = In den Infobereich minimieren
@@ -540,6 +615,14 @@ settings-general-interface-discord_presence-message =
         [one] nutzt 1 Tracker
        *[other] nutzt { $amount } Tracker
     }
+settings-interface-behavior-error_tracking = Fehlererfassung über Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Sind Sie mit der Erhebung anonymisierter Fehlerdaten einverstanden?</h1>
+    
+    <b>Wir erfassen keine personenbezogenen Daten,</b> wie Ihre IP-Adresse oder WLAN-Zugangsdaten. SlimeVR respektiert Ihre Privatsphäre!
+    
+    Um die bestmögliche Benutzererfahrung zu bieten, erfassen wir anonymisierte Fehlerberichte, Leistungsmetriken und Informationen zum Betriebssystem. Dies hilft uns, Fehler und Probleme mit SlimeVR zu erkennen. Diese Metriken werden über Sentry.io erfasst.
+settings-interface-behavior-error_tracking-label = Fehler an Entwickler senden
 
 ## Serial settings
 
@@ -602,6 +685,13 @@ settings-osc-vrchat-description-v1 =
 settings-osc-vrchat-enable = Aktivieren
 settings-osc-vrchat-enable-description = Ein- und Ausschalten des Sendens und Empfangen von Daten
 settings-osc-vrchat-enable-label = Aktivieren
+settings-osc-vrchat-oscqueryEnabled = OSCQuery aktivieren
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery erkennt laufende Instanzen von VRChat automatisch und sendet Daten an sie.
+    Es kann sich auch selbst bei diesen Instanzen bekannt machen, um HMD- und Controller-Daten zu empfangen.
+    Um den Empfang von HMD- und Controller-Daten aus VRChat zu ermöglichen, öffnen Sie das Hauptmenü,
+    gehen Sie zu den Einstellungen unter "Tracking & IK" und aktivieren Sie "Erlaube das Senden von Kopf- und Handgelenk-VR-Tracking-OSC-Daten".
+settings-osc-vrchat-oscqueryEnabled-label = OSCQuery aktivieren
 settings-osc-vrchat-network = Netzwerk-Ports
 settings-osc-vrchat-network-description-v1 = Legt die Ports für das Empfangen und Senden von Daten fest. Kann für VRChat unverändert bleiben.
 settings-osc-vrchat-network-port_in =
@@ -642,12 +732,7 @@ settings-osc-vmc-network-address-description = Setze die Adresse, wo die Daten h
 settings-osc-vmc-network-address-placeholder = IPv4-Adresse
 settings-osc-vmc-vrm = VRM-Model
 settings-osc-vmc-vrm-description = Lade ein VRM-Modell um die Kopfverankerung anzuschalten und eine bessere Kompatibilität mit anderen Anwendungen zu bekommen.
-settings-osc-vmc-vrm-model_unloaded = Kein Modell geladen
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Modell geladen: { $name }
-       *[other] Unbenanntes Modell geladen
-    }
+settings-osc-vmc-vrm-untitled_model = Unbenanntes Modell
 settings-osc-vmc-vrm-file_select = Modell per Drag & Drop laden oder <u>durchsuchen</u>
 settings-osc-vmc-anchor_hip = Hüftenverankerung
 settings-osc-vmc-anchor_hip-description = Die Hüften-Verankerung für das Tracking ist nützlich für VTubing im Sitzen. Beim Deaktivieren muss ein VRM-Model geladen werden.
@@ -682,9 +767,12 @@ settings-utils-advanced-reset_warning =
     }
 settings-utils-advanced-reset_warning-reset = Einstellungen zurücksetzen
 settings-utils-advanced-reset_warning-cancel = Abbrechen
-settings-utils-advanced-open_data = Daten-Ordner
-settings-utils-advanced-open_data-description = Öffnet den Daten-Ordner von SlimeVR im Explorer, der Konfigurations- und Protokolldateien enthält.
+settings-utils-advanced-open_data-v1 = Konfigurationsordner
+settings-utils-advanced-open_data-description-v1 = Öffnet den Konfigurationsordner von SlimeVR im Explorer, der Konfigurationsdateien enthält
 settings-utils-advanced-open_data-label = Ordner öffnen
+settings-utils-advanced-open_logs = Logs-Ordner
+settings-utils-advanced-open_logs-description = Öffnet den Logs-Ordner von SlimeVR im Explorer, der die Protokolle der App enthält.
+settings-utils-advanced-open_logs-label = Ordner öffnen
 
 ## Setup/onboarding menu
 
@@ -710,6 +798,7 @@ onboarding-wifi_creds-submit = Weiter!
 onboarding-wifi_creds-ssid =
     .label = WLAN-Name
     .placeholder = WLAN-Name eingeben
+onboarding-wifi_creds-ssid-required = WLAN-Name ist erforderlich
 onboarding-wifi_creds-password =
     .label = Passwort
     .placeholder = Passwort eingeben
@@ -767,6 +856,7 @@ onboarding-connect_tracker-issue-serial = Ich habe Schwierigkeiten die Tracker z
 onboarding-connect_tracker-usb = USB Tracker
 onboarding-connect_tracker-connection_status-none = Suche nach Trackern
 onboarding-connect_tracker-connection_status-serial_init = Verbindung zum seriellen Gerät wird hergestellt
+onboarding-connect_tracker-connection_status-obtaining_mac_address = Ermittle die MAC-Adresse des Trackers
 onboarding-connect_tracker-connection_status-provisioning = Sende WLAN-Zugangsdaten
 onboarding-connect_tracker-connection_status-connecting = Sende WLAN-Zugangsdaten
 onboarding-connect_tracker-connection_status-looking_for_server = Suche nach Server
@@ -964,37 +1054,20 @@ onboarding-automatic_mounting-put_trackers_on-title = Legen Sie Ihre Tracker an
 onboarding-automatic_mounting-put_trackers_on-description = Um die Drehung der Tracker zu kalibrieren, werden die Tracker verwendet, welche Sie gerade zugewiesen haben. Ziehen Sie alle Ihre Tracker an, in der Abbildung rechts können sie sehen um welchen Tracker es sich handelt.
 onboarding-automatic_mounting-put_trackers_on-next = Ich habe alle meine Tracker angelegt
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = Welche Kalibrierungsmethode ist zu verwenden?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    Wenn die Proportionen Ihres Körpers nicht mit den Gespeicherten übereinstimmen, ist die Präzision des Trackings schlechter. Außerdem können Probleme wie Skaten oder Rutschen auftreten oder, dass die Bewegungen Ihres Avatars nicht gut mit den Bewegungen Ihres Körpers übereinstimmen.
-    <b>Sie müssen Ihren Körper nur einmal messen!</b> Es sei denn, die Messwerte sind falsch oder Ihr Körper hat sich verändert, dann müssen Sie die Körperproportionen nochmal bestimmen.
-onboarding-choose_proportions-auto_proportions = Automatische Proportionen
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = Empfohlen
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Dies wird versuchen, Ihre Proportionen mit Hilfe einer Bewegungsaufnahme zu bestimmen, welche von einem Algorithmus verarbeitet wird.
-    
-    <b>Dazu muss Ihr Headset (HMD) mit SlimeVR verbunden sein und Sie müssen es an haben!</b>
-onboarding-choose_proportions-manual_proportions = Manuelle Körperproportionen
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = Für kleine Anpassungen
-onboarding-choose_proportions-manual_proportions-description = Auf diese Weise können Sie Ihre Proportionen manuell anpassen, indem Sie diese direkt ändern
-onboarding-choose_proportions-export = Proportionen exportieren
-onboarding-choose_proportions-import = Proportionen importieren
-onboarding-choose_proportions-import-success = Importiert
-onboarding-choose_proportions-import-failed = Fehlgeschlagen
-onboarding-choose_proportions-file_type = Körperproportions-Datei
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Gehen Sie zurück zum Reset-Tutorial
 onboarding-manual_proportions-title = Manuelle Körperproportionen
 onboarding-manual_proportions-precision = Feinanpassung
 onboarding-manual_proportions-auto = Automatische Kalibrierung
 onboarding-manual_proportions-ratio = Anpassung nach Proportionen
+onboarding-manual_proportions-fine_tuning_button = Automatische Feinabstimmung der Proportionen
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Bitte schließen Sie ein VR-Headset an, um die automatische Feinabstimmung zu nutzen
+onboarding-manual_proportions-export = Proportionen exportieren
+onboarding-manual_proportions-import = Proportionen importieren
+onboarding-manual_proportions-import-success = Importiert
+onboarding-manual_proportions-import-failed = Fehlgeschlagen
+onboarding-manual_proportions-file_type = Körperproportions-Datei
 
 ## Tracker automatic proportions setup
 
@@ -1015,19 +1088,31 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Ihr Headset sendet Positionsdaten an den SlimeVR-Server (das bedeutet allgemein, dass SteamVR läuft und über den SlimeVR-SteamVR Treiber mit SteamVR verbunden ist).
     Ihr Tracking funktioniert und stellt Ihre Bewegungen akkurat dar (z.B.: Sie haben einen Reset durchgeführt und Ihre Tracker bewegen sich beim Treten, Bücken, Sitzen, usw. richtig).
 onboarding-automatic_proportions-requirements-next = Ich habe die Anforderungen gelesen
-onboarding-automatic_proportions-check_height-title = Überprüfen Sie Ihre Körpergröße
-onboarding-automatic_proportions-check_height-description = Wir benutzen die Höhe des Headsets (HMD) als eine Schätzung für Ihre tatsächliche Grösse, doch es ist besser dass Sie diese selbst überprüfen!
+onboarding-automatic_proportions-check_height-title-v3 = Messen der Höhe Ihres Headsets
+onboarding-automatic_proportions-check_height-description-v2 = Die Höhe Ihres Headsets (HMD) sollte etwas geringer sein als Ihre vollständige Körpergröße, da Headsets die Höhe Ihrer Augen messen. Diese Messung wird als Grundlage für Ihre Körperproportionen verwendet.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Bitte betätigen Sie auf den Knopf während Sie <u>aufrecht</u> stehen, um Ihre Körpergröße zu berechnen. Sie haben 3 Sekunden Zeit, nachdem Sie auf den Knopf gedrückt haben.
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Um Ihre Körpergröße zu messen, beginnen Sie mit der Messung, während Sie <u>aufrecht</u> stehen. Achten Sie darauf, dass Sie Ihre Hände nicht höher als Ihr Headset heben, da dies die Messung beeinflussen könnte!
 onboarding-automatic_proportions-check_height-guardian_tip = Wenn Sie ein eigenständiges VR Headset verwenden, stellen Sie sicher, dass Ihr Guardian Begrenzung aktiviert ist und damit Ihre Größe korrekt ist!
-onboarding-automatic_proportions-check_height-fetch_height = Ich stehe!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Unbekannt
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = Ihre Headset-Höhe ist
+onboarding-automatic_proportions-check_height-hmd_height2 = Die Höhe Ihres Headsets beträgt:
+onboarding-automatic_proportions-check_height-measure-start = Messung starten
+onboarding-automatic_proportions-check_height-measure-stop = Messung stoppen
+onboarding-automatic_proportions-check_height-measure-reset = Messung wiederholen
+onboarding-automatic_proportions-check_height-next_step = Headset-Höhe verwenden
+onboarding-automatic_proportions-check_floor_height-title = Messen der Bodenhöhe (optional)
+onboarding-automatic_proportions-check_floor_height-description = In einigen Fällen wird die Bodenhöhe möglicherweise nicht korrekt von Ihrem Headset erfasst, wodurch die Headset-Höhe höher gemessen wird, als sie sein sollte. Sie können die „Höhe“ Ihres Bodens messen, um die Headset-Höhe zu korrigieren.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Starten Sie die Messung und legen Sie einen Controller auf den Boden, um dessen Höhe zu messen. Wenn Sie sicher sind, dass die Bodenhöhe korrekt ist, können Sie diesen Schritt überspringen.
 # Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = Ihre tatsächliche Körpergröße ist
-onboarding-automatic_proportions-check_height-next_step = Werte sind korrekt
+onboarding-automatic_proportions-check_floor_height-floor_height = Die Bodenhöhe beträgt:
+onboarding-automatic_proportions-check_floor_height-full_height = Die geschätzte Körpergröße ist:
+onboarding-automatic_proportions-check_floor_height-measure-start = Messung starten
+onboarding-automatic_proportions-check_floor_height-measure-stop = Messung stoppen
+onboarding-automatic_proportions-check_floor_height-measure-reset = Messung wiederholen
+onboarding-automatic_proportions-check_floor_height-skip_step = Schritt überspringen und speichern
+onboarding-automatic_proportions-check_floor_height-next_step = Bodenhöhe verwenden und speichern
 onboarding-automatic_proportions-start_recording-title = Bereiten Sie sich auf ein paar Bewegungen vor
 onboarding-automatic_proportions-start_recording-description = Wir werden nun einige bestimmte Posen und Bewegungen aufnehmen. Diese werden im nächsten Schritt angezeigt. Sei bereit damit zu beginnen, wenn du auf den Knopf drückst!
 onboarding-automatic_proportions-start_recording-next = Aufnahme starten
@@ -1062,6 +1147,35 @@ onboarding-automatic_proportions-error_modal-v2 =
     Dies ist wahrscheinlich ein Problem mit der Tracker-Ausrichtung. Vergewissern Sie sich, dass Ihre Tracker ordnungsgemäß funktioniert, bevor Sie es erneut versuchen.
     Bitte <docs>überprüfen Sie die Dokumentation</docs> oder treten Sie unserem <discord>Discord</discord> bei, um Hilfe zu erhalten ^_^
 onboarding-automatic_proportions-error_modal-confirm = Verstanden!
+onboarding-automatic_proportions-smol_warning =
+    Ihre konfigurierte Höhe von { $height } ist kleiner als die minimale akzeptierte Höhe von { $minHeight }.
+    <b>Bitte wiederholen Sie die Messungen und stellen Sie sicher, dass sie korrekt sind.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Zurück
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = Skalierte Proportionen
+onboarding-scaled_proportions-description = Damit die SlimeVR-Tracker funktionieren, müssen wir die Länge Ihrer Knochen kennen. Dafür wird ein durchschnittliches Proportionsverhältnis verwendet und basierend auf Ihrer Körpergröße skaliert.
+onboarding-scaled_proportions-manual_height-title = Konfigurieren Sie Ihre Körpergröße
+onboarding-scaled_proportions-manual_height-description-v2 = Diese Größe wird als Grundlage für Ihre Körperproportionen verwendet.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR ist derzeit nicht mit SlimeVR verbunden, daher können die Messungen nicht auf Ihrem Headset basieren. <b>Fahren Sie auf eigene Gefahr fort oder lesen Sie die Dokumentation!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = Ihre Körpergröße ist
+onboarding-scaled_proportions-manual_height-estimated_height = Die geschätzte Höhe des Headsets beträgt:
+onboarding-scaled_proportions-manual_height-next_step = Fortfahren und speichern
+onboarding-scaled_proportions-manual_height-warning =
+    Sie verwenden derzeit die manuelle Methode zur Einrichtung skalierter Proportionen!
+    <b>Dieser Modus wird nur empfohlen, wenn Sie kein VR-Headset mit SlimeVR verwenden.</b>
+    
+    Um die automatische Skalierung der Proportionen nutzen zu können, bitte:
+onboarding-scaled_proportions-manual_height-warning-no_hmd = Schließen Sie ein VR-Headset an
+onboarding-scaled_proportions-manual_height-warning-no_controllers = Stellen Sie sicher, dass Ihre Controller verbunden und korrekt den Händen zugewiesen sind
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = Zurücksetzen Ihrer Körperproportionen
+onboarding-scaled_proportions-reset_proportion-description = Um Ihre Körperproportionen basierend auf Ihrer Größe festzulegen, müssen nun alle Ihre Proportionen zurückgesetzt werden. Dies wird alle konfigurierten Proportionen löschen und eine Basiskonfiguration bereitstellen.
+onboarding-scaled_proportions-done-title = Körperproportionen festgelegt
+onboarding-scaled_proportions-done-description = Ihre Körperproportionen sollten nun basierend auf Ihrer Größe konfiguriert sein.
 
 ## Home
 
@@ -1087,6 +1201,149 @@ status_system-StatusSteamVRDisconnected =
 status_system-StatusTrackerError = Der Tracker "{ $trackerName }" weist einen Fehler auf.
 status_system-StatusUnassignedHMD = Das VR-Headset sollte als Kopf-Tracker zugewiesen sein.
 
+## Firmware tool globals
+
+firmware_tool-next_step = Nächster Schritt
+firmware_tool-previous_step = Vorheriger Schritt
+firmware_tool-ok = Sieht gut aus
+firmware_tool-retry = Erneut versuchen
+firmware_tool-loading = Lade...
+
+## Firmware tool Steps
+
+firmware_tool = DIY Firmware-Tool
+firmware_tool-description = Erlaubt ihnen das Konfigurieren und Flashen von DIY Trackern
+firmware_tool-not_available = Das Firmware Tool ist im Moment nicht verfügbar. Versuche sie später erneut!
+firmware_tool-not_compatible = Das Firmware Tool ist nicht mit dieser Version des Servers kompatibel. Bitte den Server aktualisieren!
+firmware_tool-board_step = Wähle das Board
+firmware_tool-board_step-description = Wähle eines der Boards unten aus der Liste aus.
+firmware_tool-board_pins_step = Überprüfe die Pins
+firmware_tool-board_pins_step-description =
+    Bitte vergewissern Sie sich, dass die ausgewählten Pins korrekt sind.
+    Wenn Sie der SlimeVR-Dokumentation gefolgt sind, sollten die Standardwerte korrekt sein.
+firmware_tool-board_pins_step-enable_led = LED aktivieren
+firmware_tool-board_pins_step-led_pin =
+    .label = LED Pin
+    .placeholder = Geben Sie die Pin-Nummer der LED ein.
+firmware_tool-board_pins_step-battery_type = Wähle den Batterie Typ aus
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Externe Batterie
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Interne Batterie
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = Internal MCP3021
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = Batteriesensor-Pin
+    .placeholder = Geben Sie die Pin-Nummer des Batteriesensors ein.
+firmware_tool-board_pins_step-battery_resistor =
+    .label = Batteriewiderstand (Ohm)
+    .placeholder = Geben Sie den Wert des Batteriewiderstands ein.
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = Battery Shield R1 (Ohms)
+    .placeholder = Geben Sie den Wert des Widerstands R1 des Battery Shields ein
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = Battery Shield R2 (Ohms)
+    .placeholder = Geben Sie den Wert des Widerstands R2 des Battery Shields ein
+firmware_tool-add_imus_step = Deklarieren Sie die IMUs
+firmware_tool-add_imus_step-description =
+    Bitte fügen Sie die IMUs hinzu, die Ihr Tracker hat.
+    Wenn Sie der SlimeVR-Dokumentation gefolgt sind, sollten die Standardwerte korrekt sein.
+firmware_tool-add_imus_step-imu_type-label = IMU Typ
+firmware_tool-add_imus_step-imu_type-placeholder = Wähle den IMU Typ aus
+firmware_tool-add_imus_step-imu_rotation =
+    .label = IMU Rotation (deg)
+    .placeholder = Rotationswinkel des IMUs
+firmware_tool-add_imus_step-scl_pin =
+    .label = SCL Pin
+    .placeholder = Pin-Nummer von SCL
+firmware_tool-add_imus_step-sda_pin =
+    .label = SDA Pin
+    .placeholder = Pin-Nummer von SDA
+firmware_tool-add_imus_step-int_pin =
+    .label = INT Pin
+    .placeholder = Pin-Nummer von INT
+firmware_tool-add_imus_step-optional_tracker =
+    .label = Optionaler Tracker
+firmware_tool-add_imus_step-show_less = Weniger anzeigen
+firmware_tool-add_imus_step-show_more = Mehr anzeigen
+firmware_tool-add_imus_step-add_more = Weitere IMUs hinzufügen
+firmware_tool-select_firmware_step = Firmware-Version auswählen
+firmware_tool-select_firmware_step-description = Bitte wählen Sie die Firmware-Version aus, die Sie verwenden möchten.
+firmware_tool-select_firmware_step-show-third-party =
+    .label = Drittanbieter-Firmware anzeigen
+firmware_tool-flash_method_step = Flash-Methode
+firmware_tool-flash_method_step-description = Bitte wählen Sie die Flash-Methode aus, die Sie verwenden möchten.
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Verwenden Sie die Over-the-Air-Methode. Ihr Tracker wird das Wi-Fi nutzen, um die Firmware zu aktualisieren. Funktioniert nur bei bereits eingerichteten Trackern.
+firmware_tool-flash_method_step-serial =
+    .label = Seriell
+    .description = Verwenden Sie ein USB-Kabel, um Ihren Tracker zu aktualisieren.
+firmware_tool-flashbtn_step = Drücken Sie den Boot-Button
+firmware_tool-flashbtn_step-description = Bevor Sie mit dem nächsten Schritt fortfahren, gibt es ein paar Dinge, die Sie erledigen müssen.
+firmware_tool-flashbtn_step-board_SLIMEVR = Schalten Sie den Tracker aus, entfernen Sie das Gehäuse (falls vorhanden), verbinden Sie ein USB-Kabel mit diesem Computer und führen Sie dann einen der folgenden Schritte entsprechend Ihrer SlimeVR-Board-Revision aus:
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Schalten Sie den Tracker ein, während Sie das zweite rechteckige FLASH-Pad von der Kante auf der Oberseite des Boards und den Metallschild des Mikrocontrollers kurzschließen.
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Schalten Sie den Tracker ein, während Sie das kreisförmige FLASH-Pad auf der Oberseite des Boards und den Metallschild des Mikrocontrollers kurzschließen.
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Schalten Sie den Tracker ein, während Sie den FLASH-Button auf der Oberseite des Boards drücken.
+firmware_tool-flashbtn_step-board_OTHER =
+    Bevor Sie den Tracker flashen, müssen Sie ihn wahrscheinlich in den Bootloader-Modus versetzen.
+    In den meisten Fällen bedeutet das, dass Sie die Boot-Taste auf dem Board drücken müssen, bevor der Flash-Vorgang beginnt.
+    Wenn der Flash-Vorgang zu Beginn aufgrund eines Timeouts fehlschlägt, bedeutet das wahrscheinlich, dass der Tracker nicht im Bootloader-Modus war.
+    Bitte beziehen Sie sich auf die Flash-Anweisungen Ihres Boards, um zu erfahren, wie Sie den Bootloader-Modus aktivieren.
+firmware_tool-flash_method_ota-devices = Erkannte OTA-Geräte:
+firmware_tool-flash_method_ota-no_devices = Es sind keine Boards vorhanden, die über OTA aktualisiert werden können. Stellen Sie sicher, dass Sie den richtigen Board-Typ ausgewählt haben.
+firmware_tool-flash_method_serial-wifi = WLAN-Zugangsdaten:
+firmware_tool-flash_method_serial-devices-label = Erkannte serielle Geräte:
+firmware_tool-flash_method_serial-devices-placeholder = Wählen Sie ein serielles Gerät aus
+firmware_tool-flash_method_serial-no_devices = Es wurden keine kompatiblen seriellen Geräte erkannt. Stellen Sie sicher, dass der Tracker angeschlossen ist.
+firmware_tool-build_step = Building
+firmware_tool-build_step-description = Die Firmware wird erstellt, bitte warten.
+firmware_tool-flashing_step = Flashen
+firmware_tool-flashing_step-description = Ihre Tracker werden geflasht, bitte folgen Sie den Anweisungen auf dem Bildschirm.
+firmware_tool-flashing_step-warning-v2 = Trennen oder schalten Sie den Tracker während des Upload-Vorgangs nicht aus, es sei denn, Sie werden dazu aufgefordert, da dies den Tracker unbrauchbar machen kann.
+firmware_tool-flashing_step-flash_more = Weitere Tracker flashen
+firmware_tool-flashing_step-exit = Schließen
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = Erstelle den Build-Ordner
+firmware_tool-build-DOWNLOADING_FIRMWARE = Lade die Firmware herunter
+firmware_tool-build-EXTRACTING_FIRMWARE = Extrahiere die Firmware
+firmware_tool-build-SETTING_UP_DEFINES = Konfiguriere die Defines
+firmware_tool-build-BUILDING = Erstellen der Firmware
+firmware_tool-build-SAVING = Speichern des Builds
+firmware_tool-build-DONE = Erstellen abgeschlossen
+firmware_tool-build-ERROR = Die Firmware konnte nicht erstellt werden
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = Lade die Firmware herunter
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = Bitte schalten Sie Ihren Tracker aus und wieder ein.
+firmware_update-status-AUTHENTICATING = Authentifizierung mit dem Mikrokontroller
+firmware_update-status-UPLOADING = Lade die Firmware hoch
+firmware_update-status-SYNCING_WITH_MCU = Synchronisieren mit dem Mikrokontroller
+firmware_update-status-REBOOTING = Wende das Update an
+firmware_update-status-PROVISIONING = WLAN-Zugangsdaten werden gesendet
+firmware_update-status-DONE = Update abgeschlossen!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = Gerät konnte nicht gefunden werden
+firmware_update-status-ERROR_TIMEOUT = Während des Updates ist eine Zeitüberschreitung aufgetreten
+firmware_update-status-ERROR_DOWNLOAD_FAILED = Die Firmware konnte nicht heruntergeladen werden
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = Authentifizierung mit dem Mikrokontroller fehlgeschlagen
+firmware_update-status-ERROR_UPLOAD_FAILED = Die Firmware konnte nicht hochgeladen werden
+firmware_update-status-ERROR_PROVISIONING_FAILED = Die WLAN-Zugangsdaten konnten nicht festgelegt werden
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = Die Update-Methode wird nicht unterstützt
+firmware_update-status-ERROR_UNKNOWN = Unbekannter Fehler
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = Firmware-Update
+firmware_update-devices = Verfügbare Geräte
+firmware_update-devices-description = Bitte wählen Sie die Tracker aus, die Sie auf die neueste Version der SlimeVR-Firmware aktualisieren möchten
+firmware_update-no_devices = Bitte stellen Sie sicher, dass die Tracker, die Sie aktualisieren möchten, eingeschaltet und mit dem WLAN verbunden sind!
+firmware_update-changelog-title = Aktualisieren auf { $version }
+firmware_update-looking_for_devices = Suche nach Geräten zum Aktualisieren...
+firmware_update-retry = Erneut versuchen
+firmware_update-update = Aktualisiere ausgewählte Tracker
+firmware_update-exit = Schließen
+
 ## Tray Menu
 
 tray_menu-show = Anzeigen
@@ -1114,3 +1371,13 @@ unknown_device-modal-description =
     Möchten Sie diesen mit SlimeVR verbinden?
 unknown_device-modal-confirm = Sicher!
 unknown_device-modal-forget = Ignorieren
+
+## Error collection consent modal
+
+error_collection_modal-title = Können wir Fehler sammeln?
+error_collection_modal-description_v2 =
+    { settings-interface-behavior-error_tracking-description_v2 }
+    
+    Sie können diese Einstellung später im Abschnitt Verhalten auf der Einstellungsseite ändern.
+error_collection_modal-confirm = Ich stimme zu
+error_collection_modal-cancel = Ich will nicht

gui/public/i18n/en-x-owo/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = connyecting to teh sewvew
 websocket-connection_lost = oopsie woopsie~ connyection wost to teh sewvew ;m;... uwu am twying to weconnyect owo!
+websocket-connection_lost-desc = uh ohs! it look like da swimevr serber cwashed... check ur logs and stuffs and maybe westawt da pwogwam.
+websocket-timedout = could nawt connec to da serwer
+websocket-timedout-desc = it look like da swimevr serwer cwashed ow time out, omg!! check da log and westawt da pwogwam.
+websocket-error-close = Exit SwimeVR
+websocket-error-logs = open da logs fowder
 
 ## Update notification
 
@@ -49,6 +54,58 @@ body_part-LEFT_HAND = weft pawb
 body_part-LEFT_UPPER_LEG = weft uppew weg
 body_part-LEFT_LOWER_LEG = weft wowwe weg
 body_part-LEFT_FOOT = weft pawb
+body_part-LEFT_THUMB_METACARPAL = weft thum medacarpool
+body_part-LEFT_THUMB_PROXIMAL = weft thum pwoximal
+body_part-LEFT_THUMB_DISTAL = weft thum dital
+body_part-LEFT_INDEX_PROXIMAL = weft index pwoximal
+body_part-LEFT_INDEX_INTERMEDIATE = weft index indamedeate
+body_part-LEFT_INDEX_DISTAL = weft index dissal
+body_part-LEFT_MIDDLE_PROXIMAL = weft middol pwoximal
+body_part-LEFT_MIDDLE_INTERMEDIATE = weft middol intermediation
+body_part-LEFT_MIDDLE_DISTAL = weft middol dittol
+body_part-LEFT_RING_PROXIMAL = weft wing woxiwal
+body_part-LEFT_RING_INTERMEDIATE = weft wing wintamediate
+body_part-LEFT_RING_DISTAL = weft wing distol
+body_part-LEFT_LITTLE_PROXIMAL = weft widdle woximol
+body_part-LEFT_LITTLE_INTERMEDIATE = weft widdle imtermedate
+body_part-LEFT_LITTLE_DISTAL = weft widdle dital
+body_part-RIGHT_THUMB_METACARPAL = wight thum medacarpool
+body_part-RIGHT_THUMB_PROXIMAL = wight thum thoximal
+body_part-RIGHT_THUMB_DISTAL = wight thum distol
+body_part-RIGHT_INDEX_PROXIMAL = wight index poximal
+body_part-RIGHT_INDEX_INTERMEDIATE = wight index imtertediate
+body_part-RIGHT_INDEX_DISTAL = wight index distal
+body_part-RIGHT_MIDDLE_PROXIMAL = wight middol pwoximal
+body_part-RIGHT_MIDDLE_INTERMEDIATE = wight middol intertediate
+body_part-RIGHT_MIDDLE_DISTAL = wight middol distol
+body_part-RIGHT_RING_PROXIMAL = wight wing roximal
+body_part-RIGHT_RING_INTERMEDIATE = wight wing imterdemiate
+body_part-RIGHT_RING_DISTAL = wight wing distol
+body_part-RIGHT_LITTLE_PROXIMAL = wight widdle pwoximal
+body_part-RIGHT_LITTLE_INTERMEDIATE = wight widdle imternediate
+body_part-RIGHT_LITTLE_DISTAL = wight widdle distol
+
+## BoardType
+
+board_type-UNKNOWN = unnown
+board_type-NODEMCU = nowdemcu
+board_type-CUSTOM = cusom boawd
+board_type-WROOM32 = wroom32
+board_type-WEMOSD1MINI = wemo d1 meenee
+board_type-TTGO_TBASE = ttgo tbase
+board_type-ESP01 = esp01
+board_type-SLIMEVR = swimevr
+board_type-LOLIN_C3_MINI = lol c3 meenee
+board_type-BEETLE32C3 = 🪲 (beetle) esp32-c3
+board_type-ESP32C3DEVKITM1 = expressive esp32-c3 devkitm1
+board_type-OWOTRACK = owo!!Track
+board_type-WRANGLER = wrangle joycons (yeehaw)
+board_type-MOCOPI = soni mocopi
+board_type-WEMOSWROOM02 = memos vroom-02 d1 meenee
+board_type-XIAO_ESP32C3 = seeeed studio xiao esp32c3
+board_type-HARITORA = hawitowa
+board_type-ESP32C6DEVKITC1 = espresso esp32-c6 devkitc1
+board_type-GLOVE_IMU_SLIMEVR_DEV = swimevr dev imu gwove
 
 ## Proportions
 
@@ -81,6 +138,14 @@ skeleton_bone-ELBOW_OFFSET = ewbow awfsewt
 ## Tracker reset buttons
 
 reset-reset_all = weset aww pwopowtions~
+reset-reset_all_warning-v2 =
+    <b>warnings!!!</b> ur pwopawshuns will be weset to default scaled to ur configuwed heit.
+    are u SHURE you want to do dis?!? >~>
+reset-reset_all_warning-reset = weset pwopawshuns
+reset-reset_all_warning-cancel = cancew :o
+reset-reset_all_warning_default-v2 =
+    <b>wawnin!!</b> ur heit has nawt been configure, ur pwopawshuns will be weset to defawts wiff da defawt heit.
+    are u REALLY sure you want to do this?! <~<
 reset-full = fuww weset~
 reset-mounting = weset meownting
 reset-yaw = yaw weset
@@ -142,9 +207,12 @@ widget-developer_mode-more_info = mowe info
 ## Widget: IMU Visualizer
 
 widget-imu_visualizer = wotation
+widget-imu_visualizer-preview = pwewiew
+widget-imu_visualizer-hide = hoide
 widget-imu_visualizer-rotation_raw = waw
 widget-imu_visualizer-rotation_preview = pwewiew
-widget-imu_visualizer-rotation_hide = hoide
+widget-imu_visualizer-acceleration = accewewation
+widget-imu_visualizer-position = pawsition
 
 ## Widget: Skeleton Visualizer
 
@@ -196,9 +264,17 @@ tracker-infos-url = twackaw uawl
 tracker-infos-version = fiwmwawe vewsion
 tracker-infos-hardware_rev = hawdwawe revision
 tracker-infos-hardware_identifier = hawdwawe id
+tracker-infos-data_support = deyta suppowt
 tracker-infos-imu = imu sensow
 tracker-infos-board_type = mane bored
 tracker-infos-network_version = pwotocol vewsiowon
+tracker-infos-magnetometer = magentometer
+tracker-infos-magnetometer-status-v1 =
+    { $status ->
+        [DISABLED] disabled.
+        [ENABLED] enabled!!
+       *[NOT_SUPPORTED] nawt suppowted...
+    }
 
 ## Tracker settings
 
@@ -213,14 +289,21 @@ tracker-settings-mounting_section-edit = edit meownting
 tracker-settings-drift_compensation_section = awwow dwift compensation
 tracker-settings-drift_compensation_section-description = shouwd this twackew compensate fow its dwift when dwift compensation is enabwed?
 tracker-settings-drift_compensation_section-edit = awwow dwift compensation
+tracker-settings-use_mag = awwow magentometer on dis twackew
+tracker-settings-use_mag-label = awwow magnetomemer
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = twackaw name
 tracker-settings-name_section-description = owo whats dis?
 tracker-settings-name_section-placeholder = ewimewl's weft pawb
+tracker-settings-name_section-label = twackaw name
 tracker-settings-forget = *forgors the tracker*
 tracker-settings-forget-description = remooves teh twackew fwom da SwimeVR sewvew n pwevent it frum conecting to it til fhe sewvew iz westawtied. the cowonfigyuwatsin of da twackew woant b wost.
 tracker-settings-forget-label = *forgors the tracker*
+tracker-settings-update-unavailable = cannawt be updayted (DIY)
+tracker-settings-update-up_to_date = up to dayte!! ^w^
+tracker-settings-update-available = { $versionName } is naow awailabwe
+tracker-settings-update = uwupdate meow!
 
 ## Tracker part card info
 
@@ -296,6 +379,7 @@ settings-sidebar-utils = utiwities
 settings-sidebar-serial = sewiaw cownsaw
 settings-sidebar-appearance = appeawance
 settings-sidebar-notifications = notificashuns
+settings-sidebar-behavior = behavur
 
 ## SteamVR settings
 
@@ -350,6 +434,7 @@ settings-general-tracker_mechanics-drift_compensation-description =
     compensates imu yaw dwift by appwying an invewse wotation.
     change amownt of compensation and how many wesets awe taken into accouwnt.
 settings-general-tracker_mechanics-drift_compensation-enabled-label = dwift compensation
+settings-general-tracker_mechanics-drift_compensation_warning-cancel = cancew :o
 settings-general-tracker_mechanics-drift_compensation-amount-label = compensation amownt
 settings-general-tracker_mechanics-drift_compensation-max_resets-label = nuwmbew of wesets uwsed
 settings-general-tracker_mechanics-save_mounting_reset = saiv awtomatic meownting weset calibwaytion
@@ -357,6 +442,10 @@ settings-general-tracker_mechanics-save_mounting_reset-description =
     saves the auwtoemyatic meownting weset cawybwationz for da twackews betwean westawts. useful
     wen weawing a sUwUit whewe twackews dont  move between sesshuns. <b>nawt wecomended for noarmal UwUsews!</b>
 settings-general-tracker_mechanics-save_mounting_reset-enabled-label = save meownting weset
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    uses magnemometer on da twackews dat have a compatubble firmwear fow it, weduces dwift in stable magnettic enviwoments.
+    can be disable per twackew in da twackew setting! <b>pwease dont shut down any twackew when u toggle dis!</b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = use mangenmometer on twackews
 
 ## FK/Tracking settings
 
@@ -380,6 +469,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = pawb-pwant wotat
 settings-general-fk_settings-leg_fk = leg twacking
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Enyabwe pawb Meownting Weset by tiptoeing.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Pawb Meownting Weset
+settings-general-fk_settings-enforce_joint_constraints = skewetal wimits
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = enfourse constwaints
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = pwevents da joins fwom wotating past da wimit
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = cowwect wit constwaints
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = cowwect joint wotashuns when dey push past their wimit
 settings-general-fk_settings-arm_fk = awm twacking
 settings-general-fk_settings-arm_fk-description = chawnge teh way teh awms awe twacked.
 settings-general-fk_settings-arm_fk-force_arms = fowce awms fwom hmd
@@ -411,9 +505,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = awewa
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Avewage the knees' yaw and woww with the ankews'
 settings-general-fk_settings-self_localization-title = mocap mowd
 settings-general-fk_settings-self_localization-description = mocap mowd awwows da skeweton to wuffly twack is own posishun without a hedset or other twackews. note dat dis wequiwes feet and hed twackews to wowk and is stiwll expewimentaw.
-settings-general-fk_settings-vive_emulation-title = vive emuwation
-settings-general-fk_settings-vive_emulation-description = emuwate the waist twackew pwobwems that vive twackews hawe. tis is a jowke and mawkes twacking wowse eheh ^^
-settings-general-fk_settings-vive_emulation-label = enabwe vive emuwation
 
 ## Gesture control settings (tracker tapping)
 
@@ -450,10 +541,10 @@ settings-general-gesture_control-numberTrackersOverThreshold-description = incwe
 ## Appearance settings
 
 settings-interface-appearance = appeawance
-settings-general-interface-dev_mode = devwowwewow mode
-settings-general-interface-dev_mode-description = this mode can be wowseffuw if you need in-dipth data owow to intewact with cownnected twackaws on a wowowe wowadvanced wowwevew
-settings-general-interface-dev_mode-label = devwowwewow mode
 settings-general-interface-theme = cowor theem
+settings-general-interface-show-navbar-onboarding = show "{ navbar-onboarding }" on da nawigation bar
+settings-general-interface-show-navbar-onboarding-description = dis change if da "{ navbar-onboarding }" button show on da nawigashun bar!
+settings-general-interface-show-navbar-onboarding-label = show "{ navbar-onboarding }"
 settings-general-interface-lang = sewect wanguage
 settings-general-interface-lang-description = change the defawwt wanguage yuw want to use
 settings-general-interface-lang-placeholder = sewect teh wanguage to use
@@ -465,6 +556,9 @@ settings-interface-appearance-font-os_font = os fawnt
 settings-interface-appearance-font-slime_font = defawt fawnt
 settings-interface-appearance-font_size = bass fawn scawing
 settings-interface-appearance-font_size-description = dis affects da fawnt size of da whol intewface except dis setting panew.
+settings-interface-appearance-decorations = use da sysem native decowashuns
+settings-interface-appearance-decorations-description = dis wiw not wendew da top bar of da interfase an will use da opewating syssem's insted.
+settings-interface-appearance-decorations-label = use native decowashuns
 
 ## Notification settings
 
@@ -479,6 +573,13 @@ settings-general-interface-feedback_sound-volume = feedback sownd volyume
 settings-general-interface-connected_trackers_warning = Connected twackews wawning
 settings-general-interface-connected_trackers_warning-description = This option wiww show a pop-up evewy time you twy exiting SwimeVR whiwe having one ow mowe connected twackews. It weminds you to tuwn off youw twackews when you awe done to pwesewve battewy wife.
 settings-general-interface-connected_trackers_warning-label = Connected twackews wawning on exit
+
+## Behavior settings
+
+settings-interface-behavior = behavur
+settings-general-interface-dev_mode = devwowwewow mode
+settings-general-interface-dev_mode-description = this mode can be wowseffuw if you need in-dipth data owow to intewact with cownnected twackaws on a wowowe wowadvanced wowwevew
+settings-general-interface-dev_mode-label = devwowwewow mode
 settings-general-interface-use_tray = minimaize to systewm tway
 settings-general-interface-use_tray-description = wets u cwose the wimdOwOw wifhout cwosing da SwimeVR Sewvew so uou can keep using it withowt da GUI bohtewing u.
 settings-general-interface-use_tray-label = minimaize to systewm tway
@@ -588,12 +689,6 @@ settings-osc-vmc-network-address-description = choose which addwess to send out
 settings-osc-vmc-network-address-placeholder = IPV4 addwess
 settings-osc-vmc-vrm = VRM modew
 settings-osc-vmc-vrm-description = woad a VRM modew to awwow head anchow and enabwe a highew compatibiwity with othew appwications
-settings-osc-vmc-vrm-model_unloaded = no modew woaded
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] modew woaded: { $name }
-       *[other] untitwed modew woaded
-    }
 settings-osc-vmc-vrm-file_select = dwag & dwop a modew to use OwO, ow <u>bwowse</u>
 settings-osc-vmc-anchor_hip = anchow at hips
 settings-osc-vmc-anchor_hip-description = anchow the twacking at the hips, usefuw fow seated vtubing
@@ -602,6 +697,29 @@ settings-osc-vmc-mirror_tracking = miwwow twacking
 settings-osc-vmc-mirror_tracking-description = miwwow da twacking howizawntawwy.
 settings-osc-vmc-mirror_tracking-label = miwwow twacking
 
+## Advanced settings
+
+settings-utils-advanced-reset_warning =
+    { $type ->
+        [gui]
+            <b>wawning!!</b> this wiww weset youw gui settings to defawts :(
+            aw you supew dupew sure?
+        [server]
+            <b>wawning!!</b> this wiww weset youw twacking settings to defawts :(
+            aw you supew dupew sure?
+       *[all]
+            <b>wawning!!</b> this wiww make aww youw settings go bye-bye!!
+            aw you supew dupew sure??
+    }
+settings-utils-advanced-reset_warning-reset = weset setings
+settings-utils-advanced-reset_warning-cancel = cancew :o
+settings-utils-advanced-open_data-v1 = config fowdew
+settings-utils-advanced-open_data-description-v1 = open swimevr's config fowdew in da fiwe explowew, containing teh configuwation
+settings-utils-advanced-open_data-label = open fowdew
+settings-utils-advanced-open_logs = logs fowdew
+settings-utils-advanced-open_logs-description = open swimevr's logs fowdew in da fiwe explowew, containing teh logs of da app
+settings-utils-advanced-open_logs-label = open fowdew
+
 ## Setup/onboarding menu
 
 onboarding-skip = skipy setup
@@ -627,6 +745,7 @@ onboarding-wifi_creds-submit = suwbmyt!
 onboarding-wifi_creds-ssid =
     .label = wi-fi nawme
     .placeholder = entew wi-fi nawme
+onboarding-wifi_creds-ssid-required = wifi name is wequiwed!!
 onboarding-wifi_creds-password =
     .label = passwowod
     .placeholder = entew passwowod
@@ -684,6 +803,7 @@ onboarding-connect_tracker-issue-serial = i'm having twouble connecting!
 onboarding-connect_tracker-usb = usb twackew
 onboarding-connect_tracker-connection_status-none = wooking fow twackaws
 onboarding-connect_tracker-connection_status-serial_init = conectin too da sewiaw dewise
+onboarding-connect_tracker-connection_status-obtaining_mac_address = obtainin teh twacker mac addwess
 onboarding-connect_tracker-connection_status-provisioning = sending wi-fi cwedentials
 onboarding-connect_tracker-connection_status-connecting = sending wi-fi cwedentials
 onboarding-connect_tracker-connection_status-looking_for_server = wookin fow da sewvew
@@ -713,6 +833,7 @@ onboarding-calibration_tutorial-status-waiting = waiiiting fur u
 onboarding-calibration_tutorial-status-calibrating = cawibwating
 onboarding-calibration_tutorial-status-success = congwats~!!
 onboarding-calibration_tutorial-status-error = da twackew was move ;w;
+onboarding-calibration_tutorial-skip = skip tutowiaw
 
 ## Tracker assignment tutorial
 
@@ -836,11 +957,11 @@ onboarding-choose_mounting = wut meownting cawibwation mefod to use?
 # Multiline text
 onboarding-choose_mounting-description = meownting owientation correct fow da pwacement of twackews on u body.
 onboarding-choose_mounting-auto_mounting = awtomawic meownting
-# Italized text
+# Italicized text
 onboarding-choose_mounting-auto_mounting-label-v2 = wecommended
 onboarding-choose_mounting-auto_mounting-description = dis will automaticawwy detec da meownting diwecshuns fow aww of ya twackews fwom 2 poses
 onboarding-choose_mounting-manual_mounting = manyul meownting
-# Italized text
+# Italicized text
 onboarding-choose_mounting-manual_mounting-label-v2 = might nawt b pwecise enuff ;w;
 onboarding-choose_mounting-manual_mounting-description = dis will let u chose da meownting diwecshun manuwawwy fow eech twackew
 # Multiline text
@@ -880,38 +1001,16 @@ onboarding-automatic_mounting-put_trackers_on-title = put on yowo twackaws
 onboarding-automatic_mounting-put_trackers_on-description = to cawibwate meownting wowations, we'we gonna use the twackaws yowo just assigned. put on awe yowo twackaws, yowo can see which awe which in the figuwe to the wowight.
 onboarding-automatic_mounting-put_trackers_on-next = i haff awe my twackaws on
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = wut pwopowshun cawibwation mefod to use?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    bawdy pwopowotions r used to knwo da mehsuwementz of youw bawdy. they'we wequiewed to cawcuwate da twackews' pawsitshons.
-    wen pwopowotiosn of ur bawdey don match teh ones saeved, yow twacking pwecisiown wiww b wowse and u wiww nowotice tingz wike skayting ow slaiding, ow yor bodiey matching uor avataw wel.
-    <b>u only need to mewhsuwe your bawdee once!!</b> unwess dey awe rong ow yer boady haz chaenged, you dont need to do them agen. UwU
-onboarding-choose_proportions-auto_proportions = awtomatic pwopowtions
-# Italized text
-onboarding-choose_proportions-auto_proportions-subtitle = wecommended
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    This wiww guess youw pwopowtions by wecowding a sampwe of youw movements and passing it thwough an awgowithm.
-    
-    <b>This wequiwes having youw headset (HMD) connected to SwimeVR and on youw head!</b>
-onboarding-choose_proportions-manual_proportions = manuwal pwopowtions
-# Italized text
-onboarding-choose_proportions-manual_proportions-subtitle = fow smol touchies
-onboarding-choose_proportions-manual_proportions-description = dis will let u ajust ur pwopowtions manuwally by modifying dem diwectwy
-onboarding-choose_proportions-export = expowt pawpowshuns
-onboarding-choose_proportions-import = Impowt pwopowtions
-onboarding-choose_proportions-import-success = Impowted
-onboarding-choose_proportions-import-failed = Faiwed
-onboarding-choose_proportions-file_type = body pawpowshuns file
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = go bawck to weset tutowiaw
 onboarding-manual_proportions-title = manyuaw bodee pwopowtiesions
 onboarding-manual_proportions-precision = pwecision adjusty
 onboarding-manual_proportions-auto = owtomatic cawybwation
 onboarding-manual_proportions-ratio = ajust by watio gwoups
+onboarding-manual_proportions-fine_tuning_button = automaticawwy fine tuwune propowtions
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = pwease connect a vr headset to use automatic fine tuwuning
+onboarding-manual_proportions-import-failed = faiwed :(
 
 ## Tracker automatic proportions setup
 
@@ -932,21 +1031,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Youw headset is wepowting positionaw data to the SwimeVR sewvew (this genewawwy means having SteamVR wunning and connected to SwimeVR using SwimeVR's SteamVR dwivew).
     Youw twacking is wowking and is accuwatewy wepwesenting youw movements (ex. you have pewfowmed a fuww weset and they move the wight diwection when kicking, bending ovew, sitting, etc).
 onboarding-automatic_proportions-requirements-next = i have wed da wequiwemens
-onboarding-automatic_proportions-check_height-title = check youw height
-onboarding-automatic_proportions-check_height-description = we use youw height as a basis of ouw measuwements by using da hmd's height as an appwoximashun of youw actuwaw height, but is better to check if they are right youwsewf!
+onboarding-automatic_proportions-check_height-title-v3 = measuwe youw headset heit
+onboarding-automatic_proportions-check_height-description-v2 = youw hedset heit shuld be swightwy less than youw fuww heit, becoz hedsets measuwe youw eye heit. dis measuwement wiww be used az a basewine fow youw body pwopowtions.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = pwease pwess da button while standing <u>upwight</u> to cawcuwate youw height. you hav 3 second aftew you pwess da button! >w<
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = stawt measuwing whiwe standin <u>upwite</u> to measuwe youw heit. be cawefuw to not waise youw hands highew than youw hedset, becoz dey may affect teh measuwement!
 onboarding-automatic_proportions-check_height-guardian_tip =
     if u r using a standowone VR hedset, make suwe to have youw gawrdian /
     bowndawy tuwned on so ur heit iz cowwect!!
-onboarding-automatic_proportions-check_height-fetch_height = am standing!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = unnown
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = youw hmd heit is
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = so youw actuaw heit is
+onboarding-automatic_proportions-check_height-hmd_height2 = youw hedset heit is:
+onboarding-automatic_proportions-check_height-measure-start = stawt measuwing
+onboarding-automatic_proportions-check_height-measure-stop = stawp measuwing
+onboarding-automatic_proportions-check_height-measure-reset = wetwy measuwing
 onboarding-automatic_proportions-check_height-next_step = dey awe fine
+onboarding-automatic_proportions-check_floor_height-title = measuwe youw fwoor heit (opshunaw)
+onboarding-automatic_proportions-check_floor_height-description = sometimez youw fwoor heit may nawt be set cowwectwy by youw hedset, cawsing da hedset heit 2 be measuwed too high (ono :c). u can measuwe da "heit" of youw fwoor to cowwect youw hedset heit.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = stawt measuwing and put a contwowwew agens youw fwoor to measuwe its heit. if u r suwe dat youw fwoor heit is cowwect, u can skip dis step.
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = youw fwoor heit is:
+onboarding-automatic_proportions-check_floor_height-full_height = youw estimated fuww heit is:
+onboarding-automatic_proportions-check_floor_height-measure-start = stawt measuwing
+onboarding-automatic_proportions-check_floor_height-measure-stop = stawp measuwing
+onboarding-automatic_proportions-check_floor_height-measure-reset = wetwy measuwing
+onboarding-automatic_proportions-check_floor_height-skip_step = skip dis and saiv
+onboarding-automatic_proportions-check_floor_height-next_step = use fwoor heit and saiv
 onboarding-automatic_proportions-start_recording-title = get wowdy to move
 onboarding-automatic_proportions-start_recording-description = we'we now going to wowcawd some specific poses and moves. these will be pwompted in teh wowst screen. be wowdy to stawt when teh buttawn is pwessed!
 onboarding-automatic_proportions-start_recording-next = stawt wowcawding
@@ -976,10 +1087,33 @@ onboarding-automatic_proportions-verify_results-redo = wedo wecowding
 onboarding-automatic_proportions-verify_results-confirm = tehywee coowect
 onboarding-automatic_proportions-done-title = bawdy meowsured anwd sayved uwu
 onboarding-automatic_proportions-done-description = yoww body pwopowwtions cawybowwation is cowowplete! ^w^
-onboarding-automatic_proportions-error_modal =
-    <b>wawning:</b> an ewwow was fownd whiwe estimating pawpowshuns! ;w;
-    pwease <docs>check da docs</docs> or join ouw <discord>Discord</discord> fow hewp >~>
+onboarding-automatic_proportions-error_modal-v2 =
+    <b>oh nyo...</b> thewe wuz an ewwow whiwe estimatin da pwopowtions... :(
+    dis is wikewy a mountin cawibwation issue. make suwe youw twackin wowks pwopewy befow twying agen.
+    pwease <docs>chek da docs</docs> ow join ouw <discord>discowd</discord> fow hewp :3
 onboarding-automatic_proportions-error_modal-confirm = undewstood!
+onboarding-automatic_proportions-smol_warning =
+    youw configuwed heit of { $height } iz way 2 widdle den da { $minHeight }.
+    <b>pwease wedo da measuwments and ensuwe dey r cowwect.</b>
+onboarding-automatic_proportions-smol_warning-cancel = go bak
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = scawed pwopowtions
+onboarding-scaled_proportions-description = fow swimevr twackews to wowk, we need to kno teh bigness of youw bowones. dis wiww use an avewage pwopowtion and scawe it based on youw heit.
+onboarding-scaled_proportions-manual_height-title = configuwe youw heit
+onboarding-scaled_proportions-manual_height-description-v2 = dis heit wiww be used az a basewine fow youw body pwopowtions.
+onboarding-scaled_proportions-manual_height-missing_steamvr = steawmvr is nawt cuwwentwy cowonnected to da swimevr, so measuwements cant be based on youw hedset ono... <b>pwoceed at youw owon wisk ow chek da docs!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = youw fuww heit is
+onboarding-scaled_proportions-manual_height-estimated_height = youw estimated hedset heit is:
+onboarding-scaled_proportions-manual_height-next_step = keep goin an saiv
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = weset youw body pwopowtions
+onboarding-scaled_proportions-reset_proportion-description = to set youw pwopowtions based on youw heit, u gotsa weset aww of youw pwopowtions. dis wiww cweaw any pwopowtions u hav configuwed and pwovide a basewine configuwation.
+onboarding-scaled_proportions-done-title = body pwopowtions set
+onboarding-scaled_proportions-done-description = youw body pwopowtions shuld nao be configuwed based on youw heit :3
 
 ## Home
 
@@ -1005,6 +1139,149 @@ status_system-StatusSteamVRDisconnected =
 status_system-StatusTrackerError = da { $trackerName } twackew has ewwow. >~<
 status_system-StatusUnassignedHMD = teh VR hedset shud be awssaignd as a hed twackew.
 
+## Firmware tool globals
+
+firmware_tool-next_step = next step
+firmware_tool-previous_step = pwevious step
+firmware_tool-ok = wooks gud
+firmware_tool-retry = wetwy
+firmware_tool-loading = woadin...
+
+## Firmware tool Steps
+
+firmware_tool = DIY fiwmwawe toow
+firmware_tool-description = awwows u to configuwe an fwash youw DIY twackews
+firmware_tool-not_available = oopsie woopsie! da fiwmwawe toow iz nawt avaiwabwe wight meow :3 twy agen laitew!
+firmware_tool-not_compatible = teh fiwmwawe toow iz nawt compatibwe wit dis vershun of teh sewvew. pwease uwupdate youw sewvew!
+firmware_tool-board_step = sewect youw boawd
+firmware_tool-board_step-description = sewect wun of da boawds wisted bewow owo
+firmware_tool-board_pins_step = check da pins
+firmware_tool-board_pins_step-description =
+    pwease vewify dat da pins hewe r cowwect.
+    if u fowwowed teh swimevr docs teh defawt vawuwes shuld be cowwect
+firmware_tool-board_pins_step-enable_led = enabwe da wights
+firmware_tool-board_pins_step-led_pin =
+    .label = pin fow teh wight
+    .placeholder = put in teh pin addwess fow teh wight
+firmware_tool-board_pins_step-battery_type = sewect da battewy taip
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = extewnaw battewy
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = intewnaw battewy
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = intewnaw mcp 3021
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = mcp3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = battewy sensow pin
+    .placeholder = put in teh pin addwess fow teh battewy sensow
+firmware_tool-board_pins_step-battery_resistor =
+    .label = battewy wesistow (owms)
+    .placeholder = put in teh vawue fow teh battewy wesistow
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = battewy shiewd r1 (owms)
+    .placeholder = put in teh vawue of battewy shiewd r1
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = battewy shiewd r2 (owms)
+    .placeholder = put in teh vawue of battewy shiewd r2
+firmware_tool-add_imus_step = decwawe youw imuwus
+firmware_tool-add_imus_step-description =
+    pwease add teh imuwus dat youw twackew got
+    if u fowwowed teh swimevr docsteh defawt vawuwes shuld be cowwect
+firmware_tool-add_imus_step-imu_type-label = imuwu taip
+firmware_tool-add_imus_step-imu_type-placeholder = sewect teh taip of imuwu
+firmware_tool-add_imus_step-imu_rotation =
+    .label = imuwu wotaishun (degwees)
+    .placeholder = wotaishun angle of teh imuwu
+firmware_tool-add_imus_step-scl_pin =
+    .label = scl pin
+    .placeholder = pin addwess of scl
+firmware_tool-add_imus_step-sda_pin =
+    .label = sda pin
+    .placeholder = pin addwess of sda
+firmware_tool-add_imus_step-int_pin =
+    .label = int pin
+    .placeholder = pin addwess of int
+firmware_tool-add_imus_step-optional_tracker =
+    .label = opshunal twackew
+firmware_tool-add_imus_step-show_less = show wess
+firmware_tool-add_imus_step-show_more = show mowe
+firmware_tool-add_imus_step-add_more = add mowe imuwus!!
+firmware_tool-select_firmware_step = sewect teh fiwmwawe vershun
+firmware_tool-select_firmware_step-description = pwease chooze wat vershun of teh fiwmwawe u wanna use
+firmware_tool-select_firmware_step-show-third-party =
+    .label = show thiwd pawty fiwmwawes
+firmware_tool-flash_method_step = fwashin mefod
+firmware_tool-flash_method_step-description = pwease sewect teh fwashin mefod u wanna use
+firmware_tool-flash_method_step-ota =
+    .label = ovew teh aiw
+    .description = use da ovew teh aiw mefod. youw twackew wiww use da wifi to uwupdate its fiwmwawe :3 but it ownwy wowks on awedy fwashed twackews!
+firmware_tool-flash_method_step-serial =
+    .label = sewiaw
+    .description = use an usb cabwe to uwupdate youw twackew.
+firmware_tool-flashbtn_step = pwess da buwut buddon
+firmware_tool-flashbtn_step-description = befow goin into da next step thewe's stuff u gotta do
+firmware_tool-flashbtn_step-board_SLIMEVR = tuwn awf da twackew, wemove da case if u got wun, conecc an usb cabwe to dis compooper, den do wun of da fowwowin steps dependin on wat swimevr boawd u got:
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = tuwn on da twackew whiwe showtin teh secund wectanguwaw FWASH!! pad fwom da edge on teh top side of teh boawd and da metaw shiewd of da micwocontwowwew
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = tuwn on da twackew whiwe showtin teh ciwcuwaw FWASH!! pad on teh top side of teh boawd and teh metaw shiewd of da micwocontwowwew
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = tuwn on da twackew whiwe pushin in da FWASH!! buddon on da top side of da boawd
+firmware_tool-flashbtn_step-board_OTHER =
+    befow fwashin u prob need 2 put da twackew into buwutwoadew mowd :3
+    mowst of da time it meens pressin da buwut buddon on da boawd befow da fwashin pwocess stawts.
+    if da fwashin pwocess timeout at da stawt of da fwashin it prob meens dat da twackew wuz nawt in buwutwoadew mowd ono
+    pwease wefew to da fwashin instwucshuns of youw boawd to no how 2 tuwn on da buwutwoadew mowd :3
+firmware_tool-flash_method_ota-devices = detectewed ovew teh aiw dewices:
+firmware_tool-flash_method_ota-no_devices = thewe r no boawds dat can be uwupdated usin ovew teh aiw, make suwe u sewected da cowwect boawd taip
+firmware_tool-flash_method_serial-wifi = wifi cwedenshuls:
+firmware_tool-flash_method_serial-devices-label = detectewed sewiaw dewices:
+firmware_tool-flash_method_serial-devices-placeholder = sewect a sewiaw dewice
+firmware_tool-flash_method_serial-no_devices = thewe r no compatibwe sewiaw dewices detectewed, make suwe da twackew is pwugged in
+firmware_tool-build_step = bildin
+firmware_tool-build_step-description = da fiwmwawe is bildin pwease wait :3
+firmware_tool-flashing_step = fwashin
+firmware_tool-flashing_step-description = youw twackews r fwashin, pwease fowwow da instwucshuns on da scween
+firmware_tool-flashing_step-warning = do NAWT unpwug ow westawt da twackew duwin da upwoad pwocess unwess towd to, it culd make youw boawd unuwusabwe
+firmware_tool-flashing_step-flash_more = fwash mowe twackews
+firmware_tool-flashing_step-exit = exit
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = cweatin da bild fowdew
+firmware_tool-build-DOWNLOADING_FIRMWARE = downwoadin da fiwmwawe
+firmware_tool-build-EXTRACTING_FIRMWARE = extwactin da fiwmwawe
+firmware_tool-build-SETTING_UP_DEFINES = configuwin da defains
+firmware_tool-build-BUILDING = bildin da fiwmwawe
+firmware_tool-build-SAVING = savin da bild
+firmware_tool-build-DONE = bild compwete!
+firmware_tool-build-ERROR = unabwe to bild da fiwmwawe...
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = downwoadin da fiwmwawe
+firmware_update-status-NEED_MANUAL_REBOOT = pwease westawt da twackew
+firmware_update-status-AUTHENTICATING = awthenticatin wit da mcu
+firmware_update-status-UPLOADING = upwoadin da fiwmwawe
+firmware_update-status-SYNCING_WITH_MCU = syncin wit da mcu
+firmware_update-status-REBOOTING = appwyin da uwupdate
+firmware_update-status-PROVISIONING = settin da wifi cwedenshuls
+firmware_update-status-DONE = uwupdate compwete!!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = culd nawt find da dewice
+firmware_update-status-ERROR_TIMEOUT = da uwupdate pwocess timed owt
+firmware_update-status-ERROR_DOWNLOAD_FAILED = culd nawt downwoad da fiwmwawe
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = culd nawt awthenticate wit da mcu
+firmware_update-status-ERROR_UPLOAD_FAILED = culd nawt upwoad da fiwmwawe
+firmware_update-status-ERROR_PROVISIONING_FAILED = culd nawt set da wifi cwedenshuls
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = da uwupdate mefod is nawt suppowted
+firmware_update-status-ERROR_UNKNOWN = unyown ewwow
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = fiwmwawe uwupdate
+firmware_update-devices = avaiwabwe dewices
+firmware_update-devices-description = pwease sewect da twackews u want to uwupdate to da latest vershun of swimevr fiwmwawe
+firmware_update-no_devices = pwease make suwe dat da twackews u want to uwupdate r AWN an conecced to da wifi!
+firmware_update-changelog-title = uwupdatin to { $version }
+firmware_update-looking_for_devices = lookin fow dewices to uwupdate...
+firmware_update-retry = wetwy
+firmware_update-update = uwupdate sewected twackews
+firmware_update-exit = exit
+
 ## Tray Menu
 
 tray_menu-show = show
@@ -1032,3 +1309,6 @@ unknown_device-modal-description =
     d-do u wanna conect it to SwimeVR?
 unknown_device-modal-confirm = sure!!
 unknown_device-modal-forget = ignowe it
+
+## Error collection consent modal
+

gui/public/i18n/en/translation.ftl

@@ -5,8 +5,13 @@
 # translators on what it means
 
 ## Websocket (server) status
-websocket-connecting = Connecting to the server
-websocket-connection_lost = Connection lost to the server. Trying to reconnect...
+websocket-connecting = Loading...
+websocket-connection_lost = The server crashed!
+websocket-connection_lost-desc = It looks like the SlimeVR server crashed. Check the logs and restart the program.
+websocket-timedout = Could not connect to the server
+websocket-timedout-desc = It looks like the SlimeVR server crashed or timed out. Check the logs and restart the program.
+websocket-error-close = Exit SlimeVR
+websocket-error-logs = Open the logs Folder
 
 ## Update notification
 version_update-title = New version available: { $version }
@@ -18,8 +23,8 @@ version_update-close = Close
 tips-find_tracker = Not sure which tracker is which? Shake a tracker and it will highlight the corresponding item.
 tips-do_not_move_heels = Ensure your heels do not move during recording!
 tips-file_select = Drag & drop files to use, or <u>browse</u>.
-tips-tap_setup = You can slowly tap 2 times your tracker to choose it instead of selecting it from the menu.
-tips-turn_on_tracker = Using official SlimeVR trackers? Remember to <b><em>turn on your tracker</em></b> after connecting it to the PC!
+tips-tap_setup = You can slowly tap your tracker 2 times to choose it instead of selecting it from the menu.
+tips-turn_on_tracker = Using official SlimeVR trackers? Don't forget to <b><em>turn on your tracker</em></b> after connecting it to the PC!
 tips-failed_webgl = Failed to initialize WebGL.
 
 ## Body parts
@@ -86,45 +91,154 @@ board_type-ESP01 = ESP-01
 board_type-SLIMEVR = SlimeVR
 board_type-LOLIN_C3_MINI = Lolin C3 Mini
 board_type-BEETLE32C3 = Beetle ESP32-C3
-board_type-ES32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU Glove
 
 ## Proportions
 skeleton_bone-NONE = None
 skeleton_bone-HEAD = Head Shift
+skeleton_bone-HEAD-desc =
+    This is the distance from your headset to the middle of your head.
+    To adjust it, shake your head left to right as if you're disagreeing and modify
+    it until any movement in other trackers is negligible.
 skeleton_bone-NECK = Neck Length
+skeleton_bone-NECK-desc =
+    This is the distance from the middle of your head to the base of your neck.
+    To adjust it, move your head up and down as if you're nodding or tilt your head
+    to the left and right and modify it until any movement in other trackers is negligible.
 skeleton_bone-torso_group = Torso length
+skeleton_bone-torso_group-desc =
+    This is the distance from the base of your neck to your hips.
+    To adjust it, modify it standing up straight until your virtual hips line
+    up with your real ones.
 skeleton_bone-UPPER_CHEST = Upper Chest Length
+skeleton_bone-UPPER_CHEST-desc =
+    This is the distance from the base of your neck to the middle of your chest.
+    To adjust it, adjust your Torso Length properly and modify it in various positions
+    (sitting down, bending over, lying down, etc.) until your virtual spine matches with your real one.
 skeleton_bone-CHEST_OFFSET = Chest Offset
+skeleton_bone-CHEST_OFFSET-desc =
+    This can be adjusted to move your virtual chest tracker up or down in order to aid
+    with calibration in certain games or applications that may expect it to be higher or lower.
 skeleton_bone-CHEST = Chest Length
+skeleton_bone-CHEST-desc =
+    This is the distance from the middle of your chest to the middle of your spine.
+    To adjust it, adjust your Torso Length properly and modify it in various positions
+    (sitting down, bending over, lying down, etc.) until your virtual spine matches with your real one.
 skeleton_bone-WAIST = Waist Length
+skeleton_bone-WAIST-desc =
+    This is the distance from the middle of your spine to your belly button.
+    To adjust it, adjust your Torso Length properly and modify it in various positions
+    (sitting down, bending over, lying down, etc.) until your virtual spine matches with your real one.
 skeleton_bone-HIP = Hip Length
+skeleton_bone-HIP-desc =
+    This is the distance from your belly button to your hips.
+    To adjust it, set your Torso Length properly and modify it in various positions
+    (sitting down, bending over, lying down, etc.) until your virtual spine matches your real one.
 skeleton_bone-HIP_OFFSET = Hip Offset
+skeleton_bone-HIP_OFFSET-desc =
+    This can be adjusted to move your virtual hip tracker up or down in order to aid
+    with calibration in certain games or applications that may expect it to be on your waist.
 skeleton_bone-HIPS_WIDTH = Hips Width
+skeleton_bone-HIPS_WIDTH-desc =
+    This is the distance between the start of your legs.
+    To adjust it, perform a full reset with your legs straight and modify it until
+    your virtual legs match up with your real ones horizontally.
 skeleton_bone-leg_group = Leg length
+skeleton_bone-leg_group-desc =
+    This is the distance from your hips to your feet.
+    To adjust it, adjust your Torso Length properly and modify it
+    until your virtual feet are at the same level as your real ones.
 skeleton_bone-UPPER_LEG = Upper Leg Length
+skeleton_bone-UPPER_LEG-desc =
+    This is the distance from your hips to your knees.
+    To adjust it, adjust your Leg Length properly and modify it
+    until your virtual knees are at the same level as your real ones.
 skeleton_bone-LOWER_LEG = Lower Leg Length
+skeleton_bone-LOWER_LEG-desc =
+    This is the distance from your knees to your ankles.
+    To adjust it, adjust your Leg Length properly and modify it
+    until your virtual knees are at the same level as your real ones.
 skeleton_bone-FOOT_LENGTH = Foot Length
+skeleton_bone-FOOT_LENGTH-desc =
+    This is the distance from your ankles to your toes.
+    To adjust it, tiptoe and modify it until your virtual feet stay in place.
 skeleton_bone-FOOT_SHIFT = Foot Shift
+skeleton_bone-FOOT_SHIFT-desc =
+    This value is the horizontal distance from your knee to your ankle.
+    It accounts for your lower legs going backwards when standing up straight.
+    To adjust it, set Foot Length to 0, perform a full reset and modify it until your virtual
+    feet line up with the middle of your ankles.
 skeleton_bone-SKELETON_OFFSET = Skeleton Offset
+skeleton_bone-SKELETON_OFFSET-desc =
+    This can be adjusted to offset all your trackers forward or backward.
+    It can be used to help with calibration in certain games or applications
+    that may expect your trackers to be more forward.
 skeleton_bone-SHOULDERS_DISTANCE = Shoulders Distance
+skeleton_bone-SHOULDERS_DISTANCE-desc =
+    This is the vertical distance from the base of your neck to your shoulders.
+    To adjust it, set Upper Arm Length to 0 and modify it until your virtual elbow trackers
+    line up vertically with your real shoulders.
 skeleton_bone-SHOULDERS_WIDTH = Shoulders Width
+skeleton_bone-SHOULDERS_WIDTH-desc =
+    This is the horizontal distance from the base of your neck to your shoulders.
+    To adjust it, set Upper Arm Length to 0 and modify it until your virtual elbow trackers
+    line up horizontally with your real shoulders.
 skeleton_bone-arm_group = Arm length
+skeleton_bone-arm_group-desc =
+    This is the distance from your shoulders to your wrists.
+    To adjust it, adjust Shoulders Distance properly, set Hand Distance Y
+    to 0 and modify it until your hand trackers line up with your wrists.
 skeleton_bone-UPPER_ARM = Upper Arm Length
+skeleton_bone-UPPER_ARM-desc =
+    This is the distance from your shoulders to your elbows.
+    To adjust it, adjust Arm Length properly and modify it until
+    your elbow trackers line up with your real elbows.
 skeleton_bone-LOWER_ARM = Lower Arm Length
+skeleton_bone-LOWER_ARM-desc =
+    This is the distance from your elbows to your wrists.
+    To adjust it, adjust Arm Length properly and modify it until
+    your elbow trackers line up with your real elbows.
 skeleton_bone-HAND_Y = Hand Distance Y
+skeleton_bone-HAND_Y-desc =
+    This is the vertical distance from your wrists to the middle of your hand.
+    To adjust it for motion capture, adjust Arm Length properly and modify it until your
+    hand trackers line up vertically with the middle of your hands.
+    To adjust it for elbow tracking from your controllers, set Arm Length to 0 and
+    modify it until your elbow trackers line up vertically with your wrists.
 skeleton_bone-HAND_Z = Hand Distance Z
+skeleton_bone-HAND_Z-desc =
+    This is the horizontal distance from your wrists to the middle of your hand.
+    To adjust it for motion capture, set it to 0.
+    To adjust it for elbow tracking from your controllers, set Arm Length to 0 and
+    modify it until your elbow trackers line up horizontally with your wrists.
 skeleton_bone-ELBOW_OFFSET = Elbow Offset
+skeleton_bone-ELBOW_OFFSET-desc =
+    This can be adjusted to move your virtual elbow trackers up or down in order to aid
+    with VRChat accidentally binding an elbow tracker to the chest.
 
 ## Tracker reset buttons
 reset-reset_all = Reset all proportions
-reset-reset_all_warning =
-    <b>Warning:</b> This will reset your proportions to being just based on your height.
+reset-reset_all_warning-v2 =
+    <b>Warning:</b> Your proportions will be reset to defaults scaled to your configured height.
     Are you sure you want to do this?
 reset-reset_all_warning-reset = Reset proportions
 reset-reset_all_warning-cancel = Cancel
+reset-reset_all_warning_default-v2 =
+    <b>Warning:</b> Your height has not been configured, your proportions will be reset to defaults with the default height.
+    Are you sure you want to do this?
 
 reset-full = Full Reset
 reset-mounting = Reset Mounting
+reset-mounting-feet = Reset Feet Mounting
+reset-mounting-fingers = Reset Fingers Mounting
 reset-yaw = Yaw Reset
 
 ## Serial detection stuff
@@ -147,6 +261,7 @@ navbar-settings = Settings
 ## Biovision hierarchy recording
 bvh-start_recording = Record BVH
 bvh-recording = Recording...
+bvh-save_title = Save BVH recording
 
 ## Tracking pause
 tracking-unpaused = Pause tracking
@@ -161,7 +276,7 @@ widget-overlay-is_mirrored_label = Display Overlay as Mirror
 widget-drift_compensation-clear = Clear drift compensation
 
 ## Widget: Clear Reset Mounting
-widget-clear_mounting = Clear reset mounting
+widget-clear_mounting = Clear Reset Mounting
 
 ## Widget: Developer settings
 widget-developer_mode = Developer Mode
@@ -181,6 +296,7 @@ widget-imu_visualizer-rotation_raw = Raw rotation
 widget-imu_visualizer-rotation_preview = Preview rotation
 widget-imu_visualizer-acceleration = Acceleration
 widget-imu_visualizer-position = Position
+widget-imu_visualizer-stay_aligned = Stay Aligned
 
 ## Widget: Skeleton Visualizer
 widget-skeleton_visualizer-preview = Skeleton preview
@@ -205,6 +321,7 @@ tracker-table-column-temperature = Temp. °C
 tracker-table-column-linear-acceleration = Accel. X/Y/Z
 tracker-table-column-rotation = Rotation X/Y/Z
 tracker-table-column-position = Position X/Y/Z
+tracker-table-column-stay_aligned = Stay Aligned
 tracker-table-column-url = URL
 
 ## Tracker rotation
@@ -217,7 +334,7 @@ tracker-rotation-back = Back
 tracker-rotation-back_left = Back-Left
 tracker-rotation-back_right = Back-Right
 tracker-rotation-custom = Custom
-tracker-rotation-overriden = (overriden by mounting reset)
+tracker-rotation-overriden = (overridden by mounting reset)
 
 ## Tracker information
 tracker-infos-manufacturer = Manufacturer
@@ -264,10 +381,12 @@ tracker-settings-name_section-description = Give it a cute nickname :)
 tracker-settings-name_section-placeholder = NightyBeast's left leg
 tracker-settings-name_section-label = Tracker name
 tracker-settings-forget = Forget tracker
-tracker-settings-forget-description = Removes the tracker from the SlimeVR Server and prevent it from connecting to it until the server is restarted. The configuration of the tracker won't be lost.
+tracker-settings-forget-description = Removes the tracker from the SlimeVR Server and prevents it from connecting until the server is restarted. The configuration of the tracker won't be lost.
 tracker-settings-forget-label = Forget tracker
 tracker-settings-update-unavailable = Cannot be updated (DIY)
+tracker-settings-update-low-battery = Cannot update. Battery lower than 50%
 tracker-settings-update-up_to_date = Up to date
+tracker-settings-update-blocked = Update not available. No other releases available
 tracker-settings-update-available = { $versionName } is now available
 tracker-settings-update = Update now
 tracker-settings-update-title = Firmware version
@@ -278,7 +397,7 @@ tracker-part_card-unassigned = Unassigned
 
 ## Body assignment menu
 body_assignment_menu = Where do you want this tracker to be?
-body_assignment_menu-description = Choose a location where you want this tracker to be assigned. Alternatively you can choose to manage all trackers at once instead of one by one.
+body_assignment_menu-description = Choose a location where you want this tracker to be assigned. Alternatively, you can choose to manage all trackers at once instead of one by one.
 body_assignment_menu-show_advanced_locations = Show advanced assign locations
 body_assignment_menu-manage_trackers = Manage all trackers
 body_assignment_menu-unassign_tracker = Unassign tracker
@@ -321,8 +440,8 @@ tracker_selection_menu-dont_assign = Unassign
 # This line cares about multilines.
 # <b>text</b> means that the text should be bold.
 tracker_selection_menu-neck_warning =
-    <b>Warning:</b> A neck tracker can be deadly if adjusted too tightly,
-    the strap could cut the circulation to your head!
+    <b>Warning:</b> A neck tracker can be deadly if adjusted too tightly;
+    the strap could cut off circulation to your head!
 tracker_selection_menu-neck_warning-done = I understand the risks
 tracker_selection_menu-neck_warning-cancel = Cancel
 
@@ -334,6 +453,7 @@ mounting_selection_menu-close = Close
 settings-sidebar-title = Settings
 settings-sidebar-general = General
 settings-sidebar-tracker_mechanics = Tracker mechanics
+settings-sidebar-stay_aligned = Stay Aligned
 settings-sidebar-fk_settings = Tracking settings
 settings-sidebar-gesture_control = Gesture control
 settings-sidebar-interface = Interface
@@ -343,7 +463,9 @@ settings-sidebar-utils = Utilities
 settings-sidebar-serial = Serial console
 settings-sidebar-appearance = Appearance
 settings-sidebar-notifications = Notifications
+settings-sidebar-behavior = Behavior
 settings-sidebar-firmware-tool = DIY Firmware Tool
+settings-sidebar-vrc_warnings = VRChat Config Warnings
 settings-sidebar-advanced = Advanced
 
 ## SteamVR settings
@@ -367,7 +489,7 @@ settings-general-steamvr-trackers-right_elbow = Right elbow
 settings-general-steamvr-trackers-left_hand = Left hand
 settings-general-steamvr-trackers-right_hand = Right hand
 settings-general-steamvr-trackers-tracker_toggling = Automatic tracker assignment
-settings-general-steamvr-trackers-tracker_toggling-description = Automatically handles toggling SteamVR trackers on or off depending on your current tracker assignments
+settings-general-steamvr-trackers-tracker_toggling-description = Automatically handles toggling SteamVR trackers on or off depending on your current tracker assignments.
 settings-general-steamvr-trackers-tracker_toggling-label = Automatic tracker assignment
 settings-general-steamvr-trackers-hands-warning = <b>Warning:</b> hand trackers will override your controllers.
     Are you sure?
@@ -380,7 +502,7 @@ settings-general-tracker_mechanics-filtering = Filtering
 # This also cares about multilines
 settings-general-tracker_mechanics-filtering-description =
     Choose the filtering type for your trackers.
-    Prediction predicts movement while smoothing smoothens movement.
+    Prediction predicts movement while smoothing smooths movement.
 settings-general-tracker_mechanics-filtering-type = Filtering type
 settings-general-tracker_mechanics-filtering-type-none = No filtering
 settings-general-tracker_mechanics-filtering-type-none-description = Use rotations as is. Will not do any filtering.
@@ -393,8 +515,8 @@ settings-general-tracker_mechanics-yaw-reset-smooth-time = Yaw reset smooth time
 settings-general-tracker_mechanics-drift_compensation = Drift compensation
 # This cares about multilines
 settings-general-tracker_mechanics-drift_compensation-description =
-    Compensates IMU yaw drift by applying an inverse rotation.
-    Change amount of compensation and up to how many resets are taken into account.
+    Compensates for IMU yaw drift by applying an inverse rotation.
+    Change the amount of compensation and the number of resets taken into account.
     This should only be used if you need to reset very often!
 settings-general-tracker_mechanics-drift_compensation-enabled-label = Drift compensation
 settings-general-tracker_mechanics-drift_compensation-prediction = Drift compensation prediction
@@ -424,6 +546,26 @@ settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
     Can be disabled per tracker in the tracker's settings. <b>Please don't shutdown any of the trackers while toggling this!</b>
 settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Use magnetometer on trackers
 
+settings-stay_aligned = Stay Aligned
+settings-stay_aligned-description = Stay Aligned reduces drift by gradually adjusting your trackers to match your relaxed poses.
+settings-stay_aligned-setup-label = Setup Stay Aligned
+settings-stay_aligned-setup-description = You must complete "Setup Stay Aligned" to enable Stay Aligned.
+settings-stay_aligned-warnings-drift_compensation = ⚠ Please turn off Drift Compensation! Drift Compensation will conflict with Stay Aligned.
+settings-stay_aligned-enabled-label = Adjust trackers
+settings-stay_aligned-hide_yaw_correction-label = Hide adjustment (to compare with no Stay Aligned)
+settings-stay_aligned-general-label = General
+settings-stay_aligned-relaxed_poses-label = Relaxed Poses
+settings-stay_aligned-relaxed_poses-description = Stay Aligned uses your relaxed poses to keep the trackers aligned. Use "Setup Stay Aligned" to update these poses.
+settings-stay_aligned-relaxed_poses-standing = Adjust trackers while standing
+settings-stay_aligned-relaxed_poses-sitting = Adjust trackers while sitting in a chair
+settings-stay_aligned-relaxed_poses-flat = Adjust trackers while sitting on the floor, or lying on your back
+settings-stay_aligned-relaxed_poses-save_pose = Save pose
+settings-stay_aligned-relaxed_poses-reset_pose = Reset pose
+settings-stay_aligned-relaxed_poses-close = Close
+settings-stay_aligned-debug-label = Debugging
+settings-stay_aligned-debug-description = Please include your settings when reporting problems about Stay Aligned.
+settings-stay_aligned-debug-copy-label = Copy settings to clipboard
+
 ## FK/Tracking settings
 settings-general-fk_settings = Tracking settings
 
@@ -439,13 +581,18 @@ settings-general-fk_settings-leg_tweak-skating_correction = Skating correction
 settings-general-fk_settings-leg_tweak-toe_snap = Toe snap
 settings-general-fk_settings-leg_tweak-foot_plant = Foot plant
 settings-general-fk_settings-leg_tweak-skating_correction-amount = Skating correction strength
-settings-general-fk_settings-leg_tweak-skating_correction-description = Skating-correction corrects for ice skating but can decrease accuracy in certain movement patterns. When enabling this make sure to full reset and recalibrate in game.
-settings-general-fk_settings-leg_tweak-floor_clip-description = Floor-clip can Reduce or even eliminates clipping through the floor. When enabling this, make sure to full reset and recalibrate in game.
-settings-general-fk_settings-leg_tweak-toe_snap-description = Toe-snap attempts to guess the rotation of your feet if feet trackers are not in use.
+settings-general-fk_settings-leg_tweak-skating_correction-description = Skating-correction corrects for ice skating, but can decrease accuracy in certain movement patterns. When enabling this, make sure to perform a full reset and recalibrate in-game.
+settings-general-fk_settings-leg_tweak-floor_clip-description = Floor-clip can reduce or eliminate clipping through the floor. When enabling this, make sure to perform a full reset and recalibrate in-game.
+settings-general-fk_settings-leg_tweak-toe_snap-description = Toe-snap attempts to guess the rotation of your feet if foot trackers are not in use.
 settings-general-fk_settings-leg_tweak-foot_plant-description = Foot-plant rotates your feet to be parallel to the ground when in contact.
 settings-general-fk_settings-leg_fk = Leg tracking
-settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Enable feet Mounting Reset by tiptoeing.
-settings-general-fk_settings-leg_fk-reset_mounting_feet = Feet Mounting Reset
+settings-general-fk_settings-leg_fk-reset_mounting_feet-description-v1 = Force feet mounting reset during general mounting resets.
+settings-general-fk_settings-leg_fk-reset_mounting_feet-v1 = Force feet mounting reset
+settings-general-fk_settings-enforce_joint_constraints = Skeletal Limits
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Enforce constraints
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Prevents joints from rotating past their limit
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Correct with constraints
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Correct joint rotations when they push past their limit
 settings-general-fk_settings-arm_fk = Arm tracking
 settings-general-fk_settings-arm_fk-description = Force arms to be tracked from the headset (HMD) even if positional hand data is available.
 settings-general-fk_settings-arm_fk-force_arms = Force arms from HMD
@@ -456,11 +603,11 @@ settings-general-fk_settings-arm_fk-reset_mode-description = Change which arm po
 settings-general-fk_settings-arm_fk-back = Back
 settings-general-fk_settings-arm_fk-back-description = The default mode, with the upper arms going back and lower arms going forward.
 settings-general-fk_settings-arm_fk-tpose_up = T-pose (up)
-settings-general-fk_settings-arm_fk-tpose_up-description = Expects your arms to be down on the sides during Full Reset, and 90 degrees up to the sides during Mounting Reset.
+settings-general-fk_settings-arm_fk-tpose_up-description = Expects your arms to be down at your sides during Full Reset, and 90 degrees up to the sides during Mounting Reset.
 settings-general-fk_settings-arm_fk-tpose_down = T-pose (down)
-settings-general-fk_settings-arm_fk-tpose_down-description = Expects your arms to be 90 degrees up to the sides during Full Reset, and down on the sides during Mounting Reset.
+settings-general-fk_settings-arm_fk-tpose_down-description = Expects your arms to be 90 degrees up to the sides during Full Reset, and down at your sides during Mounting Reset.
 settings-general-fk_settings-arm_fk-forward = Forward
-settings-general-fk_settings-arm_fk-forward-description = Expects your arms to be up 90 degrees forward. Useful for VTubing.
+settings-general-fk_settings-arm_fk-forward-description = Expects your arms to be raised forward at 90 degrees. Useful for VTubing.
 settings-general-fk_settings-skeleton_settings-toggles = Skeleton toggles
 settings-general-fk_settings-skeleton_settings-description = Toggle skeleton settings on or off. It is recommended to leave these on.
 settings-general-fk_settings-skeleton_settings-extended_spine_model = Extended spine model
@@ -479,10 +626,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Average the k
 settings-general-fk_settings-self_localization-title = Mocap mode
 settings-general-fk_settings-self_localization-description = Mocap Mode allows the skeleton to roughly track its own position without a headset or other trackers. Note that this requires feet and head trackers to work and is still experimental.
 
-settings-general-fk_settings-vive_emulation-title = Vive emulation
-settings-general-fk_settings-vive_emulation-description = Emulate the waist tracker problems that Vive trackers have. This is a joke and makes tracking worse.
-settings-general-fk_settings-vive_emulation-label = Enable Vive emulation
-
 ## Gesture control settings (tracker tapping)
 settings-general-gesture_control = Gesture control
 settings-general-gesture_control-subtitle = Tap based resets
@@ -519,10 +662,10 @@ settings-general-interface-dev_mode-description = This mode can be useful if you
 settings-general-interface-dev_mode-label = Developer Mode
 settings-general-interface-theme = Color theme
 settings-general-interface-show-navbar-onboarding = Show "{ navbar-onboarding }" on navigation bar
-settings-general-interface-show-navbar-onboarding-description = This changes if the "{ navbar-onboarding }" button shows on the navigation bar.
+settings-general-interface-show-navbar-onboarding-description = This changes whether the "{ navbar-onboarding }" button shows on the navigation bar.
 settings-general-interface-show-navbar-onboarding-label = Show "{ navbar-onboarding }"
 settings-general-interface-lang = Select language
-settings-general-interface-lang-description = Change the default language you want to use.
+settings-general-interface-lang-description = Change the default language.
 settings-general-interface-lang-placeholder = Select the language to use
 # Keep the font name untranslated
 settings-interface-appearance-font = GUI font
@@ -539,17 +682,23 @@ settings-interface-appearance-decorations-label = Use native decorations
 ## Notification settings
 settings-interface-notifications = Notifications
 settings-general-interface-serial_detection = Serial device detection
-settings-general-interface-serial_detection-description = This option will show a pop-up every time you plug a new serial device that could be a tracker. It helps improving the setup process of a tracker.
+settings-general-interface-serial_detection-description = This option will show a pop-up every time you plug in a new serial device that could be a tracker. It helps to improve the setup process of a tracker.
 settings-general-interface-serial_detection-label = Serial device detection
 settings-general-interface-feedback_sound = Feedback sound
-settings-general-interface-feedback_sound-description = This option will play a sound when a reset is triggered.
+settings-general-interface-feedback_sound-description = This option plays a sound when a reset is triggered.
 settings-general-interface-feedback_sound-label = Feedback sound
 settings-general-interface-feedback_sound-volume = Feedback sound volume
 settings-general-interface-connected_trackers_warning = Connected trackers warning
 settings-general-interface-connected_trackers_warning-description = This option will show a pop-up every time you try exiting SlimeVR while having one or more connected trackers. It reminds you to turn off your trackers when you are done to preserve battery life.
 settings-general-interface-connected_trackers_warning-label = Connected trackers warning on exit
+
+## Behavior settings
+settings-interface-behavior = Behavior
+settings-general-interface-dev_mode = Developer Mode
+settings-general-interface-dev_mode-description = This mode can be useful if you need in-depth data or need to interact with connected trackers on a more advanced level.
+settings-general-interface-dev_mode-label = Developer Mode
 settings-general-interface-use_tray = Minimize to system tray
-settings-general-interface-use_tray-description = Lets you close the window without closing the SlimeVR Server so you can continue using it without having the GUI bothering you.
+settings-general-interface-use_tray-description = Lets you close the window without closing the SlimeVR Server so you can continue using it without having the GUI bother you.
 settings-general-interface-use_tray-label = Minimize to system tray
 settings-general-interface-discord_presence = Share activity on Discord
 settings-general-interface-discord_presence-description = Tells your Discord client that you are using SlimeVR along with the number of IMU trackers you are using.
@@ -559,6 +708,18 @@ settings-general-interface-discord_presence-message = { $amount ->
     [one] Using 1 tracker
     *[other] Using { $amount } trackers
 }
+settings-interface-behavior-error_tracking = Error collection via Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Do you consent to the collection of anonymized error data?</h1>
+
+    <b>We do not collect personal information</b> such as your IP address or wireless credentials. SlimeVR values your privacy!
+
+    To provide the best user experience, we collect anonymized error reports, performance metrics, and operating system information. This helps us detect bugs and issues with SlimeVR. These metrics are collected via Sentry.io.
+
+settings-interface-behavior-error_tracking-label = Send errors to developers
+settings-interface-behavior-bvh_directory = Directory to save BVH recordings
+settings-interface-behavior-bvh_directory-description = Choose a directory to save your BVH recordings instead of having to choose where to save them each time.
+settings-interface-behavior-bvh_directory-label = Directory for BVH recordings
 
 ## Serial settings
 settings-serial = Serial Console
@@ -588,7 +749,7 @@ settings-osc-router = OSC router
 # This cares about multilines
 settings-osc-router-description =
     Forward OSC messages from another program.
-    Useful for using another OSC program with VRChat for example.
+    Useful for using another OSC program with VRChat, for example.
 settings-osc-router-enable = Enable
 settings-osc-router-enable-description = Toggle the forwarding of messages.
 settings-osc-router-enable-label = Enable
@@ -614,11 +775,16 @@ settings-osc-vrchat-description-v1 =
     Change settings specific to the OSC Trackers standard used for sending
     tracking data to applications without SteamVR (ex. Quest standalone).
     Make sure to enable OSC in VRChat via the Action Menu under OSC > Enabled.
-    To allow receiving HMD and controller data from VRChat, go in your main menu's
-    settings under Tracking & IK > Allow Sending Head and Wrist VR Tracking OSC Data.
 settings-osc-vrchat-enable = Enable
 settings-osc-vrchat-enable-description = Toggle the sending and receiving of data.
 settings-osc-vrchat-enable-label = Enable
+settings-osc-vrchat-oscqueryEnabled = Enable OSCQuery
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery automatically detects running instances of VRChat and sends them data.
+    It can also advertise itself to them in order to receive HMD and controller data.
+    To allow receiving HMD and controller data from VRChat, go in your main menu's settings
+    under "Tracking & IK" and enable "Allow Sending Head and Wrist VR Tracking OSC Data".
+settings-osc-vrchat-oscqueryEnabled-label = Enable OSCQuery
 settings-osc-vrchat-network = Network ports
 settings-osc-vrchat-network-description-v1 = Set the ports for listening and sending data. Can be left untouched for VRChat.
 settings-osc-vrchat-network-port_in =
@@ -643,7 +809,7 @@ settings-osc-vmc = Virtual Motion Capture
 # This cares about multilines
 settings-osc-vmc-description =
     Change settings specific to the VMC (Virtual Motion Capture) protocol
-        to send SlimeVR's bone data and receive bone data from other apps.
+    to send SlimeVR's bone data and receive bone data from other apps.
 settings-osc-vmc-enable = Enable
 settings-osc-vmc-enable-description = Toggle the sending and receiving of data.
 settings-osc-vmc-enable-label = Enable
@@ -691,9 +857,12 @@ settings-utils-advanced-reset_warning =
 settings-utils-advanced-reset_warning-reset = Reset settings
 settings-utils-advanced-reset_warning-cancel = Cancel
 
-settings-utils-advanced-open_data = Data folder
-settings-utils-advanced-open_data-description = Open SlimeVR's data folder in file explorer, containing config and log files.
+settings-utils-advanced-open_data-v1 = Config folder
+settings-utils-advanced-open_data-description-v1 = Open SlimeVR's config folder in file explorer, containing the configuration
 settings-utils-advanced-open_data-label = Open folder
+settings-utils-advanced-open_logs = Logs folder
+settings-utils-advanced-open_logs-description = Open SlimeVR's logs folder in file explorer, containing the logs of the app
+settings-utils-advanced-open_logs-label = Open folder
 
 ## Setup/onboarding menu
 onboarding-skip = Skip setup
@@ -726,30 +895,30 @@ onboarding-wifi_creds-password =
 ## Mounting setup
 onboarding-reset_tutorial-back = Go Back to Mounting calibration
 onboarding-reset_tutorial = Reset tutorial
-onboarding-reset_tutorial-explanation = While you use your trackers they might get out of alignment because of IMU yaw drift, or because you might have moved them physically. You have several ways to fix this.
+onboarding-reset_tutorial-explanation = While you use your trackers, they might get out of alignment because of IMU yaw drift, or because you might have moved them physically. You have several ways to fix this.
 onboarding-reset_tutorial-skip = Skip step
 # Cares about multiline
-onboarding-reset_tutorial-0 = Tap { $taps } times the highlighted tracker for triggering yaw reset.
+onboarding-reset_tutorial-0 = Tap the highlighted tracker { $taps } times to trigger a yaw reset.
 
     This will make the trackers face the same direction as your headset (HMD).
 # Cares about multiline
-onboarding-reset_tutorial-1 = Tap { $taps } times the highlighted tracker for triggering full reset.
+onboarding-reset_tutorial-1 = Tap the highlighted tracker { $taps } times to trigger a full reset.
 
     You need to be standing for this (i-pose). There is a 3 seconds delay (configurable) before it actually happens.
     This fully resets the position and rotation of all your trackers. It should fix most issues.
 # Cares about multiline
-onboarding-reset_tutorial-2 = Tap { $taps } times the highlighted tracker for triggering mounting reset.
+onboarding-reset_tutorial-2 = Tap the highlighted tracker { $taps } times to trigger a mounting reset.
 
-    Mounting reset helps on how the trackers are actually put on you, so if you accidentally moved them and changed how they are oriented by a big amount, this will help.
+    Mounting reset adjusts for how trackers are placed on your body. If they've moved or rotated significantly, this helps recalibrate their orientation.
 
-    You need to be on a pose like you are skiing like it's shown on the Automatic Mounting wizard and you have a 3 second delay (configurable) before it gets triggered.
+    You need to be in a pose like you are skiing as shown in the Automatic Mounting wizard, and you have a 3 second delay (configurable) before it gets triggered.
 
 ## Setup start
 onboarding-home = Welcome to SlimeVR
 onboarding-home-start = Let's get set up!
 
 ## Enter VR part of setup
-onboarding-enter_vr-back = Go Back to Tracker assignent
+onboarding-enter_vr-back = Go Back to Tracker assignment
 onboarding-enter_vr-title = Time to enter VR!
 onboarding-enter_vr-description = Put on all your trackers and then enter VR!
 onboarding-enter_vr-ready = I'm ready
@@ -775,6 +944,17 @@ onboarding-connect_tracker-connection_status-looking_for_server = Looking for se
 onboarding-connect_tracker-connection_status-connection_error = Unable to connect to Wi-Fi
 onboarding-connect_tracker-connection_status-could_not_find_server = Could not find the server
 onboarding-connect_tracker-connection_status-done = Connected to the Server
+onboarding-connect_tracker-connection_status-no_serial_log = Could not get logs from the tracker
+onboarding-connect_tracker-connection_status-no_serial_device_found = Could not find a tracker from USB
+onboarding-connect_serial-error-modal-no_serial_log = Is the tracker turned on?
+onboarding-connect_serial-error-modal-no_serial_log-desc = Make sure the tracker is turned on and connected to your computer.
+onboarding-connect_serial-error-modal-no_serial_device_found = No trackers detected
+onboarding-connect_serial-error-modal-no_serial_device_found-desc =
+    Please connect a tracker with the provided USB cable to your computer and turn the tracker on.
+    If this does not work:
+      - try using a different USB cable
+      - try using a different USB port
+      - try reinstalling the SlimeVR server and select "USB Drivers" in the components section
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -790,8 +970,8 @@ onboarding-connect_tracker-next = I connected all my trackers
 ## Tracker calibration tutorial
 onboarding-calibration_tutorial = IMU Calibration Tutorial
 onboarding-calibration_tutorial-subtitle = This will help reduce tracker drifting!
-onboarding-calibration_tutorial-description = Every time you turn on your trackers, they need to rest for a moment on a flat surface to calibrate. Let's do the same thing by clicking the "{ onboarding-calibration_tutorial-calibrate }" button, <b>do not move them!</b>
-onboarding-calibration_tutorial-calibrate = I placed my trackers on the table
+onboarding-calibration_tutorial-description-v1 = After turning on your trackers, place them on a stable surface for a moment to allow for calibration. Calibration can be performed at any time after the trackers are powered on—this page simply provides a tutorial. To begin, click the "{ onboarding-calibration_tutorial-calibrate }" button, then <b>do not move your trackers!</b>
+onboarding-calibration_tutorial-calibrate = I placed my trackers on a table
 onboarding-calibration_tutorial-status-waiting = Waiting for you
 onboarding-calibration_tutorial-status-calibrating = Calibrating
 onboarding-calibration_tutorial-status-success = Nice!
@@ -939,51 +1119,38 @@ onboarding-automatic_mounting-mounting_reset-title = Mounting Reset
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Squat in a "skiing" pose with your legs bent, your upper body tilted forwards, and your arms bent.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Press the "Reset Mounting" button and wait for 3 seconds before the trackers' mounting orientations will reset.
 onboarding-automatic_mounting-preparation-title = Preparation
-onboarding-automatic_mounting-preparation-step-0 = 1. Stand upright with your arms to your sides.
-onboarding-automatic_mounting-preparation-step-1 = 2. Press the "Full Reset" button and wait for 3 seconds before the trackers will reset.
+onboarding-automatic_mounting-preparation-v2-step-0 = 1. Press the "Full Reset" button.
+onboarding-automatic_mounting-preparation-v2-step-1 = 2. Stand upright with your arms to your sides. Make sure to look forward.
+onboarding-automatic_mounting-preparation-v2-step-2 = 3. Hold the position until the 3s timer ends.
 onboarding-automatic_mounting-put_trackers_on-title = Put on your trackers
 onboarding-automatic_mounting-put_trackers_on-description = To calibrate mounting orientations, we're gonna use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.
 onboarding-automatic_mounting-put_trackers_on-next = I have all my trackers on
 
-## Tracker proportions method choose
-onboarding-choose_proportions = What proportion calibration method to use?
-# Multiline string
-onboarding-choose_proportions-description-v1 = Body proportions are used to know the measurements of your body. They're required to calculate the trackers' positions.
-    When proportions of your body don't match the ones saved, your tracking precision will be worse and you will notice things like skating or sliding, or your body not matching your avatar well.
-    <b>You only need to measure your body once!</b> Unless they are wrong or your body has changed, then you don't need to do them again.
-onboarding-choose_proportions-auto_proportions = Automatic proportions
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = Recommended
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    This will guess your proportions by recording a sample of your movements and passing it through an algorithm.
-
-    <b>This requires having your headset (HMD) connected to SlimeVR and on your head!</b>
-onboarding-choose_proportions-manual_proportions = Manual proportions
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = For small touches
-onboarding-choose_proportions-manual_proportions-description = This will let you adjust your proportions manually by modifying them directly
-onboarding-choose_proportions-export = Export proportions
-onboarding-choose_proportions-import = Import proportions
-onboarding-choose_proportions-import-success = Imported
-onboarding-choose_proportions-import-failed = Failed
-onboarding-choose_proportions-file_type = Body proportions file
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 onboarding-manual_proportions-back = Go Back to Reset tutorial
 onboarding-manual_proportions-title = Manual Body Proportions
-onboarding-manual_proportions-precision = Precision adjust
-onboarding-manual_proportions-auto = Automatic proportions
-onboarding-manual_proportions-ratio = Adjust by ratio groups
+onboarding-manual_proportions-fine_tuning_button = Automatically fine tune proportions
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Please connect a VR headset to use automatic fine tuning
+onboarding-manual_proportions-export = Export proportions
+onboarding-manual_proportions-import = Import proportions
+onboarding-manual_proportions-file_type = Body proportions file
+onboarding-manual_proportions-normal_increment = Normal increment
+onboarding-manual_proportions-precise_increment = Precise increment
+onboarding-manual_proportions-grouped_proportions = Grouped proportions
+onboarding-manual_proportions-all_proportions = All proportions
+onboarding-manual_proportions-estimated_height = Estimated user height
 
 ## Tracker automatic proportions setup
-onboarding-automatic_proportions-back = Go Back to Reset tutorial
+onboarding-automatic_proportions-back = Go Back to Manual Proportions
 onboarding-automatic_proportions-title = Measure your body
 onboarding-automatic_proportions-description = For SlimeVR trackers to work, we need to know the length of your bones. This short calibration will measure it for you.
 onboarding-automatic_proportions-manual = Manual proportions
 onboarding-automatic_proportions-prev_step = Previous step
+
 onboarding-automatic_proportions-put_trackers_on-title = Put on your trackers
 onboarding-automatic_proportions-put_trackers_on-description = To calibrate your proportions, we're gonna use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.
 onboarding-automatic_proportions-put_trackers_on-next = I have all my trackers on
+
 onboarding-automatic_proportions-requirements-title = Requirements
 # Each line of text is a different list item
 onboarding-automatic_proportions-requirements-descriptionv2 =
@@ -993,32 +1160,48 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Your headset is reporting positional data to the SlimeVR server (this generally means having SteamVR running and connected to SlimeVR using SlimeVR's SteamVR driver).
     Your tracking is working and is accurately representing your movements (ex. you have performed a full reset and they move the right direction when kicking, bending over, sitting, etc).
 onboarding-automatic_proportions-requirements-next = I have read the requirements
-onboarding-automatic_proportions-check_height-title = Check your height
-onboarding-automatic_proportions-check_height-description = We use your height as a basis of our measurements by using the headset's (HMD) height as an approximation of your actual height, but it's better to check if they are right yourself!
+
+onboarding-automatic_proportions-check_height-title-v3 = Measure your headset height
+onboarding-automatic_proportions-check_height-description-v2 = Your headset (HMD) height should be slightly less than your full height because headsets measure your eye height. This measurement will be used as a baseline for your body proportions.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Please press the button while standing <u>upright</u> to calculate your height. You have 3 seconds after you press the button!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Start measuring while standing <u>upright</u> to measure your height. Be careful not to raise your hands higher than your headset, as they may affect the measurement!
 onboarding-automatic_proportions-check_height-guardian_tip = If you are using a standalone VR headset, make sure to have your guardian /
     boundary turned on so that your height is correct!
-onboarding-automatic_proportions-check_height-fetch_height = I'm standing!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Unknown
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = Your HMD height is
+onboarding-automatic_proportions-check_height-hmd_height2 = Your headset height is:
+onboarding-automatic_proportions-check_height-measure-start = Start measuring
+onboarding-automatic_proportions-check_height-measure-stop = Stop measuring
+onboarding-automatic_proportions-check_height-measure-reset = Retry measuring
+onboarding-automatic_proportions-check_height-next_step = Use headset height
+
+onboarding-automatic_proportions-check_floor_height-title = Measure your floor height (optional)
+onboarding-automatic_proportions-check_floor_height-description = In some cases, your floor height may not be set correctly by your headset, causing the headset height to be measured as higher than it should be. You can measure the "height" of your floor to correct your headset height.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Start measuring and put a controller against your floor to measure its height. If you are sure that your floor height is correct, you can skip this step.
 # Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = so your actual height is
-onboarding-automatic_proportions-check_height-next_step = They are fine
+onboarding-automatic_proportions-check_floor_height-floor_height = Your floor height is:
+onboarding-automatic_proportions-check_floor_height-full_height = Your estimated full height is:
+onboarding-automatic_proportions-check_floor_height-measure-start = Start measuring
+onboarding-automatic_proportions-check_floor_height-measure-stop = Stop measuring
+onboarding-automatic_proportions-check_floor_height-measure-reset = Retry measuring
+onboarding-automatic_proportions-check_floor_height-skip_step = Skip step and save
+onboarding-automatic_proportions-check_floor_height-next_step = Use floor height and save
+
 onboarding-automatic_proportions-start_recording-title = Get ready to move
 onboarding-automatic_proportions-start_recording-description = We're now going to record some specific poses and moves. These will be prompted in the next screen. Be ready to start when the button is pressed!
 onboarding-automatic_proportions-start_recording-next = Start Recording
+
 onboarding-automatic_proportions-recording-title = REC
 onboarding-automatic_proportions-recording-description-p0 = Recording in progress...
 onboarding-automatic_proportions-recording-description-p1 = Make the moves shown below:
 # Each line of text is a different list item
 onboarding-automatic_proportions-recording-steps =
     Standing up straight, roll your head in a circle.
-    Bend your back forwards and squat. While squatting, look to your left, then to your right.
-    Twist your upper body to the left (counter-clockwise), then reach down towards the ground.
-    Twist your upper body to the right (clockwise), then reach down towards the ground.
+    Bend your back forward and squat. While squatting, look to your left, then to your right.
+    Twist your upper body to the left (counter-clockwise), then reach down toward the ground.
+    Twist your upper body to the right (clockwise), then reach down toward the ground.
     Roll your hips in a circular motion as if you're using a hula hoop.
     If there is time left on the recording, you can repeat these steps until it's finished.
 onboarding-automatic_proportions-recording-processing = Processing the result
@@ -1027,12 +1210,14 @@ onboarding-automatic_proportions-recording-timer = { $time ->
     [one] 1 second left
     *[other] { $time } seconds left
 }
+
 onboarding-automatic_proportions-verify_results-title = Verify results
 onboarding-automatic_proportions-verify_results-description = Check the results below, do they look correct?
 onboarding-automatic_proportions-verify_results-results = Recording results
 onboarding-automatic_proportions-verify_results-processing = Processing the result
 onboarding-automatic_proportions-verify_results-redo = Redo recording
 onboarding-automatic_proportions-verify_results-confirm = They're correct
+
 onboarding-automatic_proportions-done-title = Body measured and saved.
 onboarding-automatic_proportions-done-description = Your body proportions' calibration is complete!
 onboarding-automatic_proportions-error_modal-v2 =
@@ -1041,6 +1226,67 @@ onboarding-automatic_proportions-error_modal-v2 =
     Please <docs>check the docs</docs> or join our <discord>Discord</discord> for help ^_^
 onboarding-automatic_proportions-error_modal-confirm = Understood!
 
+onboarding-automatic_proportions-smol_warning =
+    Your configured height of { $height } is smaller than the minimum accepted height of { $minHeight }.
+    <b>Please redo the measurements and ensure they are correct.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Go back
+
+## Tracker scaled proportions setup
+onboarding-scaled_proportions-title = Scaled proportions
+onboarding-scaled_proportions-description = For SlimeVR trackers to work, we need to know the length of your bones. This will use an average proportion and scale it based on your height.
+onboarding-scaled_proportions-manual_height-title = Configure your height
+onboarding-scaled_proportions-manual_height-description-v2 = This height will be used as a baseline for your body proportions.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR is not currently connected to SlimeVR, so measurements can't be based on your headset. <b>Proceed at your own risk or check the docs!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = Your full height is
+onboarding-scaled_proportions-manual_height-estimated_height = Your estimated headset height is:
+onboarding-scaled_proportions-manual_height-next_step = Continue and save
+onboarding-scaled_proportions-manual_height-warning =
+    You are currently using the manual way of setting up scaled proportions!
+    <b>This mode is recommended only if you do not use an HMD with SlimeVR.</b>
+
+    To be able to use the automatic scaled proportions please:
+onboarding-scaled_proportions-manual_height-warning-no_hmd = Connect a VR Headset
+onboarding-scaled_proportions-manual_height-warning-no_controllers = Make sure your controllers are connected and correctly assigned to your hands
+
+## Tracker scaled proportions reset
+onboarding-scaled_proportions-reset_proportion-title = Reset your body proportions
+onboarding-scaled_proportions-reset_proportion-description = To set your body proportions based on your height, you need to now reset all of your proportions. This will clear any proportions you have configured and provide a baseline configuration.
+onboarding-scaled_proportions-done-title = Body proportions set
+onboarding-scaled_proportions-done-description = Your body proportions should now be configured based on your height.
+
+## Stay Aligned setup
+onboarding-stay_aligned-title = Stay Aligned
+onboarding-stay_aligned-description = Configure Stay Aligned to keep your trackers aligned.
+onboarding-stay_aligned-put_trackers_on-title = Put on your trackers
+onboarding-stay_aligned-put_trackers_on-description = To save your resting poses, we'll use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.
+onboarding-stay_aligned-put_trackers_on-trackers_warning = You have fewer than 5 trackers currently connected and assigned! This is the minimum amount of trackers required for Stay Aligned to function properly.
+onboarding-stay_aligned-put_trackers_on-next = I have all my trackers on
+onboarding-stay_aligned-verify_mounting-title = Check your Mounting
+onboarding-stay_aligned-verify_mounting-step-0 = Stay Aligned requires good mounting. Otherwise, you won't get a good experience with Stay Aligned.
+onboarding-stay_aligned-verify_mounting-step-1 = 1. Move around while standing.
+onboarding-stay_aligned-verify_mounting-step-2 = 2. Sit down and move your legs and feet.
+onboarding-stay_aligned-verify_mounting-step-3 = 3. If your trackers aren't in the right place, press "Redo Mounting Calibration".
+onboarding-stay_aligned-verify_mounting-redo_mounting = Redo Mounting calibration
+onboarding-stay_aligned-preparation-title = Preparation
+onboarding-stay_aligned-preparation-tip = Make sure to stand upright. Keep looking forward with your arms down at your sides.
+onboarding-stay_aligned-relaxed_poses-standing-title = Relaxed Standing Pose
+onboarding-stay_aligned-relaxed_poses-standing-step-0 = 1. Stand in a comfortable position. Relax!
+onboarding-stay_aligned-relaxed_poses-standing-step-1-v2 = 2. Press the "Save pose" button.
+onboarding-stay_aligned-relaxed_poses-sitting-title = Relaxed Sitting in Chair Pose
+onboarding-stay_aligned-relaxed_poses-sitting-step-0 = 1. Sit in a comfortable position. Relax!
+onboarding-stay_aligned-relaxed_poses-sitting-step-1-v2 = 2. Press the "Save pose" button.
+onboarding-stay_aligned-relaxed_poses-flat-title = Relaxed Sitting on Floor Pose
+onboarding-stay_aligned-relaxed_poses-flat-step-0 = 1. Sit on the floor with your legs in front. Relax!
+onboarding-stay_aligned-relaxed_poses-flat-step-1-v2 = 2. Press the "Save pose" button.
+onboarding-stay_aligned-relaxed_poses-skip_step = Skip
+onboarding-stay_aligned-done-title = Stay Aligned enabled!
+onboarding-stay_aligned-done-description = Your Stay Aligned setup is complete!
+onboarding-stay_aligned-done-description-2 = Setup is complete! You may restart the process if you want to recalibrate the poses.
+onboarding-stay_aligned-previous_step = Previous
+onboarding-stay_aligned-next_step = Next
+onboarding-stay_aligned-restart = Restart
+onboarding-stay_aligned-done = Done
+
 ## Home
 home-no_trackers = No trackers detected or assigned
 
@@ -1060,6 +1306,10 @@ status_system-StatusSteamVRDisconnected = { $type ->
 }
 status_system-StatusTrackerError = The { $trackerName } tracker has an error.
 status_system-StatusUnassignedHMD = The VR headset should be assigned as a head tracker.
+status_system-StatusPublicNetwork = {$count ->
+    [one] Your network profile is currently set to Public ({$adapters}). This is not recommended for SlimeVR to function properly. <PublicFixLink>See how to fix it here.</PublicFixLink>
+    *[many] Some of your network adapters are set to public: {$adapters}. This is not recommended for SlimeVR to function properly. <PublicFixLink>See how to fix it here.</PublicFixLink>
+}
 
 
 ## Firmware tool globals
@@ -1083,7 +1333,7 @@ firmware_tool-board_step-description = Select one of the boards listed below.
 firmware_tool-board_pins_step = Check the pins
 firmware_tool-board_pins_step-description =
     Please verify that the selected pins are correct.
-    If you followed the SlimeVR documentation the defaults values should be correct
+    If you followed the SlimeVR documentation, the default values should be correct.
 firmware_tool-board_pins_step-enable_led = Enable LED
 firmware_tool-board_pins_step-led_pin =
     .label = LED Pin
@@ -1111,8 +1361,8 @@ firmware_tool-board_pins_step-battery_shield_resistor-1 =
 
 firmware_tool-add_imus_step = Declare your IMUs
 firmware_tool-add_imus_step-description =
-    Please add the IMUs that your tracker has
-    If you followed the SlimeVR documentation the defaults values should be correct
+    Please add the IMUs that your tracker has.
+    If you followed the SlimeVR documentation, the default values should be correct.
 firmware_tool-add_imus_step-imu_type-label = IMU type
 firmware_tool-add_imus_step-imu_type-placeholder = Select the type of IMU
 firmware_tool-add_imus_step-imu_rotation =
@@ -1144,23 +1394,23 @@ firmware_tool-flash_method_step-description =
     Please select the flashing method you want to use
 firmware_tool-flash_method_step-ota =
     .label = OTA
-    .description = Use the over the air method. Your tracker will use the Wi-Fi to update it's firmware. Works only on already setup trackers.
+    .description = Use the over-the-air method. Your tracker will use Wi-Fi to update its firmware. Only works on trackers that have been set up.
 firmware_tool-flash_method_step-serial =
     .label = Serial
     .description = Use a USB cable to update your tracker.
 
 firmware_tool-flashbtn_step = Press the boot btn
-firmware_tool-flashbtn_step-description = Before going into the next step there is a few things you need to do
+firmware_tool-flashbtn_step-description = Before going to the next step, there are a few things you need to do
 
-firmware_tool-flashbtn_step-board_SLIMEVR = Turn off the tracker, remove the case (if any), connect a USB cable to this computer, then do one of the following steps according to your SlimeVR board revision:
-firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Turn on the tracker while shorting the second rectangular FLASH pad from the edge on the top side of the board, and the metal shield of the microcontroller
-firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Turn on the tracker while shorting the circular FLASH pad on the top side of the board, and the metal shield of the microcontroller
-firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Turn on the tracker while pushing in the FLASH button on the top side of the board
+firmware_tool-flashbtn_step-board_SLIMEVR = Turn off the tracker, remove the case (if any), connect the USB cable to your computer, then follow the appropriate steps for your SlimeVR board revision:
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Turn on the tracker while shorting the second rectangular FLASH pad from the edge on the top side of the board to the metal shield of the microcontroller.
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Turn on the tracker while shorting the circular FLASH pad on the top side of the board to the metal shield of the microcontroller.
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Turn on the tracker while pushing in the FLASH button on the top side of the board.
 
-firmware_tool-flashbtn_step-board_OTHER = Before flashing you will probably need to put the tracker into bootloader mode.
-    Most of the time it means pressing the boot button on the board before the flashing process starts.
-    If the flashing process timeout at the begining of the flashing it probably means that the tracker was not in bootloader mode
-    Please refer to the flashing instructions of your board to know how to turn on the boatloader mode
+firmware_tool-flashbtn_step-board_OTHER = Before flashing, you will probably need to put the tracker into bootloader mode.
+    Most of the time, this means pressing the boot button on the board before the flashing process starts.
+    If the flashing process times out at the start, it probably means that the tracker was not in bootloader mode.
+    Refer to your board's flashing instructions to learn how to enter bootloader mode.
 
 
 
@@ -1178,7 +1428,7 @@ firmware_tool-build_step-description =
 firmware_tool-flashing_step = Flashing
 firmware_tool-flashing_step-description =
     Your trackers are flashing, please follow the instructions on the screen
-firmware_tool-flashing_step-warning = Do not unplug or restart the tracker during the upload process unless told to, it may make your board unusable
+firmware_tool-flashing_step-warning-v2 = Do not unplug or turn off the tracker during the upload process unless told to, it may make your board unusable
 firmware_tool-flashing_step-flash_more = Flash more trackers
 firmware_tool-flashing_step-exit = Exit
 
@@ -1194,11 +1444,11 @@ firmware_tool-build-ERROR = Unable to build the firmware
 
 ## Firmware update status
 firmware_update-status-DOWNLOADING = Downloading the firmware
-firmware_update-status-NEED_MANUAL_REBOOT = Waiting for the user to reboot the tracker
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = Please turn your tracker off and on again
 firmware_update-status-AUTHENTICATING = Authenticating with the mcu
 firmware_update-status-UPLOADING = Uploading the firmware
 firmware_update-status-SYNCING_WITH_MCU = Syncing with the mcu
-firmware_update-status-REBOOTING = Rebooting the tracker
+firmware_update-status-REBOOTING = Applying the update
 firmware_update-status-PROVISIONING = Setting Wi-Fi credentials
 firmware_update-status-DONE = Update complete!
 firmware_update-status-ERROR_DEVICE_NOT_FOUND = Could not find the device
@@ -1213,12 +1463,13 @@ firmware_update-status-ERROR_UNKNOWN = Unknown error
 ## Dedicated Firmware Update Page
 firmware_update-title = Firmware update
 firmware_update-devices = Available Devices
-firmware_update-devices-description = Please select the trackers you want to update to the latest version of SlimeVR firmware
-firmware_update-no_devices = Plase make sure that the trackers you want to update are ON and connected to the Wi-Fi!
+firmware_update-devices-description = Please select the trackers you want to update to the latest version of SlimeVR firmware.
+firmware_update-no_devices = Please make sure that the trackers you want to update are ON and connected to the Wi-Fi!
 firmware_update-changelog-title = Updating to {$version}
 firmware_update-looking_for_devices = Looking for devices to update...
 firmware_update-retry = Retry
 firmware_update-update = Update Selected Trackers
+firmware_update-exit = Exit
 
 ## Tray Menu
 tray_menu-show = Show
@@ -1228,7 +1479,7 @@ tray_menu-quit = Quit
 ## First exit modal
 tray_or_exit_modal-title = What should the close button do?
 # Multiline text
-tray_or_exit_modal-description = This lets you choose whether you want to exit the server or to minimize it to the tray when pressing the close button.
+tray_or_exit_modal-description = Choose whether to exit the server or minimize it to the tray when clicking the close button.
 
     You can change this later in the interface settings!
 tray_or_exit_modal-radio-exit = Exit on close
@@ -1242,3 +1493,56 @@ unknown_device-modal-description = There is a new tracker with MAC address <b>{$
     Do you want to connect it to SlimeVR?
 unknown_device-modal-confirm = Sure!
 unknown_device-modal-forget = Ignore it
+
+
+# VRChat config warnings
+vrc_config-page-title = VRChat configuration warnings
+vrc_config-page-desc = This page shows the state of your VRChat settings and shows what settings are incompatible with SlimeVR. It is highly recommended that you fix any warnings showing up here for the best user experience with SlimeVR.
+vrc_config-page-help = Can't find the settings?
+vrc_config-page-help-desc = Check out our <a>documentation on this topic!</a>
+vrc_config-page-big_menu = Tracking & IK (Big Menu)
+vrc_config-page-big_menu-desc = Settings related to IK in the big settings menu
+vrc_config-page-wrist_menu = Tracking & IK (Wrist Menu)
+vrc_config-page-wrist_menu-desc = Settings related to IK in small settings menu (wrist menu)
+vrc_config-on = On
+vrc_config-off = Off
+vrc_config-invalid = You have misconfigured VRChat settings!
+vrc_config-show_more = Show more
+vrc_config-setting_name = VRChat Setting name
+vrc_config-recommended_value = Recommended Value
+vrc_config-current_value = Current Value
+vrc_config-mute = Mute Warning
+vrc_config-mute-btn = Mute
+vrc_config-unmute-btn = Unmute
+vrc_config-legacy_mode = Use Legacy IK Solving
+vrc_config-disable_shoulder_tracking = Disable Shoulder Tracking
+vrc_config-shoulder_width_compensation = Shoulder Width Compensation
+vrc_config-spine_mode = FBT Spine Mode
+vrc_config-tracker_model = FBT Tracker Model
+vrc_config-avatar_measurement_type = Avatar Measurement
+vrc_config-calibration_range = Calibration Range
+vrc_config-calibration_visuals = Display Calibration Visuals
+vrc_config-user_height = User Real Height
+
+vrc_config-spine_mode-UNKNOWN = Unknown
+vrc_config-spine_mode-LOCK_BOTH = Lock Both
+vrc_config-spine_mode-LOCK_HEAD = Lock Head
+vrc_config-spine_mode-LOCK_HIP = Lock Hip
+
+vrc_config-tracker_model-UNKNOWN = Unknown
+vrc_config-tracker_model-AXIS = Axis
+vrc_config-tracker_model-BOX = Box
+vrc_config-tracker_model-SPHERE = Sphere
+vrc_config-tracker_model-SYSTEM = System
+
+vrc_config-avatar_measurement_type-UNKNOWN = Unknown
+vrc_config-avatar_measurement_type-HEIGHT = Height
+vrc_config-avatar_measurement_type-ARM_SPAN = Arm Span
+
+## Error collection consent modal
+error_collection_modal-title = Can we collect errors?
+error_collection_modal-description_v2 = { settings-interface-behavior-error_tracking-description_v2 }
+
+    You can change this setting later in the Behavior section of the settings page.
+error_collection_modal-confirm = I agree
+error_collection_modal-cancel = I don't want to

gui/public/i18n/es-419/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Conectando al servidor
 websocket-connection_lost = Conexión al servidor perdida. Intentando reconectar...
+websocket-connection_lost-desc = Parece que el servidor de SlimeVR ha dejado de funcionar. Revise los registros y reinicie el programa.
+websocket-timedout = No se ha podido conectar al servidor.
+websocket-timedout-desc = Parece que el servidor de SlimeVR ha dejado de funcionar o se agotó el tiempo de espera de la conexión. Revise los registros y reinicie el programa
+websocket-error-close = Salir de SlimeVR
+websocket-error-logs = Abrir la carpeta de registros
 
 ## Update notification
 
@@ -49,43 +54,194 @@ body_part-LEFT_HAND = Mano izquierda
 body_part-LEFT_UPPER_LEG = Muslo izquierdo
 body_part-LEFT_LOWER_LEG = Tobillo izquierdo
 body_part-LEFT_FOOT = Pie izquierdo
+body_part-LEFT_THUMB_METACARPAL = Metacarpiano del pulgar izquierdo
+body_part-LEFT_THUMB_PROXIMAL = Proximal del pulgar izquierdo
+body_part-LEFT_THUMB_DISTAL = Distal del pulgar izquierdo
+body_part-LEFT_INDEX_PROXIMAL = Proximal del índice izquierdo
+body_part-LEFT_INDEX_INTERMEDIATE = Medial del índice izquierdo
+body_part-LEFT_INDEX_DISTAL = Distal del índice izquierdo
+body_part-LEFT_MIDDLE_PROXIMAL = Proximal del dedo medio izquierdo
+body_part-LEFT_MIDDLE_INTERMEDIATE = Medial del dedo medio izquierdo
+body_part-LEFT_MIDDLE_DISTAL = Distal del dedo medio izquierdo
+body_part-LEFT_RING_PROXIMAL = Proximal del dedo anular izquierdo
+body_part-LEFT_RING_INTERMEDIATE = Medial del dedo anular izquierdo
+body_part-LEFT_RING_DISTAL = Distal del dedo anular izquierdo
+body_part-LEFT_LITTLE_PROXIMAL = Proximal del meñique izquierdo
+body_part-LEFT_LITTLE_INTERMEDIATE = Medial del meñique izquierdo
+body_part-LEFT_LITTLE_DISTAL = Distal del meñique izquierdo
+body_part-RIGHT_THUMB_METACARPAL = Metacarpiano del pulgar derecho
+body_part-RIGHT_THUMB_PROXIMAL = Proximal del pulgar derecho
+body_part-RIGHT_THUMB_DISTAL = Distal del pulgar derecho
+body_part-RIGHT_INDEX_PROXIMAL = Proximal del índice derecho
+body_part-RIGHT_INDEX_INTERMEDIATE = Medial del índice derecho
+body_part-RIGHT_INDEX_DISTAL = Distal del índice derecho
+body_part-RIGHT_MIDDLE_PROXIMAL = Proximal del dedo medio derecho
+body_part-RIGHT_MIDDLE_INTERMEDIATE = Medial del dedo medio derecho
+body_part-RIGHT_MIDDLE_DISTAL = Distal del dedo medio derecho
+body_part-RIGHT_RING_PROXIMAL = Proximal del dedo anular derecho
+body_part-RIGHT_RING_INTERMEDIATE = Medial del dedo anular derecho
+body_part-RIGHT_RING_DISTAL = Distal del dedo anular derecho
+body_part-RIGHT_LITTLE_PROXIMAL = Proximal del meñique derecho
+body_part-RIGHT_LITTLE_INTERMEDIATE = Medial del meñique derecho
+body_part-RIGHT_LITTLE_DISTAL = Distal del meñique derecho
+
+## BoardType
+
+board_type-UNKNOWN = Desconocido
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Placa personalizada
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = Guante SlimeVR Dev IMU
 
 ## Proportions
 
 skeleton_bone-NONE = Nada
 skeleton_bone-HEAD = Inclinación de cabeza
+skeleton_bone-HEAD-desc =
+    Esta es la distancia entre tu casco y el medio de tu cabeza.
+    Para ajustarlo, mueve tu cabeza de izquierda a derecha como si no estuvieras de acuerdo
+    y modifícalo hasta que cualquier movimiento con otros trackers sea insignificante.
 skeleton_bone-NECK = Largo del cuello
+skeleton_bone-NECK-desc =
+    Esta es la distancia entre el medio de tu cabeza hacia la base de tu nuca.
+    Para ajustarlo, mueve tu cabeza de arriba a abajo como su estuvieras asintiendo o ladea tu cabeza
+    hacia la izquierda y derecha y modifícalo hasta que cualquier movimiento con otros trackers sea insignificante.
 skeleton_bone-torso_group = Largo del torso
+skeleton_bone-torso_group-desc =
+    Esta es la distancia entre la base de tu nuca con tus caderas.
+    Para ajustarlo, modifícalo parándote recto hasta que tus caderas virtuales se alineen
+    con las reales.
 skeleton_bone-UPPER_CHEST = Largo del pecho superior
+skeleton_bone-UPPER_CHEST-desc =
+    Esta es la distancia entre la base de tu nuca hacia el medio de tu pecho.
+    Para ajustarlo, ajusta el largo de tu torso apropiadamente y modifícalo en varias posiciones
+    (Sentándote, agachándote, acostándote, etc.) hasta que tu columna virtual se alinee con la real.
 skeleton_bone-CHEST_OFFSET = Chest Offset
+skeleton_bone-CHEST_OFFSET-desc =
+    Esto se puede ajustar para mover tu tracker de pecho virtual hacia arriba o abajo para ayudar
+    con la calibración en ciertos juegos o aplicaciones que lo esperan mas alto o bajo.
 skeleton_bone-CHEST = Largo del pecho
+skeleton_bone-CHEST-desc =
+    Esta es la distancia entre la mitad de tu pecho hasta la mitad de tu columna.
+    Para ajustarlo, ajusta el largo de tu torso apropiadamente y modifícalo en varias posiciones
+    (sentándote, agachándote, acostándote, etc.) hasta que tu columna virtual se alinee con la real.
 skeleton_bone-WAIST = Largo de la cintura
+skeleton_bone-WAIST-desc =
+    Esta es la distancia entre la mitad de tu columna con tu ombligo.
+    Para ajustarlo, ajusta el largo de tu torso apropiadamente y modifícalo en varias posiciones
+    (sentándote, agachándote, acostándote, etc.) hasta que tu columna virtual se alinee con la real.
 skeleton_bone-HIP = Largo de la cadera
+skeleton_bone-HIP-desc =
+    Esta es la distancia entre tu ombligo hacia tus caderas
+    Para ajustarla, ajusta el largo de tu torso apropiadamente y modifícala en varias posiciones
+    (sentándote, agachándote, acostándote, etc.) hasta que tu columna virtual se alinee con la real.
 skeleton_bone-HIP_OFFSET = Desplazamiento de la cadera
+skeleton_bone-HIP_OFFSET-desc =
+    Esto se puede ajustar para mover tu cadera virtual hacia arriba o hacia abajo para ayudar
+    con la calibración en ciertos juegos o aplicaciones que lo esperen en tu cintura.
 skeleton_bone-HIPS_WIDTH = Ancho de la cadera
+skeleton_bone-HIPS_WIDTH-desc =
+    Esta es la distancia entre el comienzo de tus piernas.
+    Para ajustarlo, inicia un reinicio completo con tus piernas rectas y modifícalo hasta que
+    tus piernas virtuales se alineen con las reales horizontalmente.
 skeleton_bone-leg_group = Largo de la pierna
+skeleton_bone-leg_group-desc =
+    Esta es la distancia entre tus caderas hacia tus pies.
+    Para ajustarlo, ajusta el largo de tu torso apropiadamente y modifícalo
+    hasta que tus pies virtuales estén al mismo nivel que los tuyos.
 skeleton_bone-UPPER_LEG = Largo del muslo
+skeleton_bone-UPPER_LEG-desc =
+    Esta es la distancia entre tus caderas hacia tus rodillas.
+    Para ajustarlo, ajusta el largo de tus piernas apropiadamente y modifícalo
+    hasta que tus rodillas virtuales estén al mismo nivel que las tuyas.
 skeleton_bone-LOWER_LEG = Largo de la tibia
+skeleton_bone-LOWER_LEG-desc =
+    Esta es la distancia entre tus rodillas hacia tus tobillos.
+    Para ajustarlo, ajusta el largo de tus piernas apropiadamente y modifícalo
+    hasta que tus rodillas virtuales estén al mismo nivel que las tuyas.
 skeleton_bone-FOOT_LENGTH = Largo del pie
+skeleton_bone-FOOT_LENGTH-desc =
+    Esta es la distancia entre tus tobillos hacia tus dedos del pie.
+    Para ajustarla, párate de puntillas y modifícalo hasta que tus pies virtuales se mantengan en su lugar.
 skeleton_bone-FOOT_SHIFT = Desplazamiento de pies
+skeleton_bone-FOOT_SHIFT-desc =
+    Este valor es la distancia horizontal entre tu rodilla hacia tu tobillo.
+    Toma en cuenta las piernas bajas yendo hacia atrás cuando te paras recto.
+    Para ajustarlo, pon el largo de los pies en 0, inicia un reinicia completo y modifícalo hasta que tus pies
+    virtuales se alineen con el medio de tus tobillos.
 skeleton_bone-SKELETON_OFFSET = Desplazamiento del esqueleto
+skeleton_bone-SKELETON_OFFSET-desc =
+    Esto puede ser ajustado para compensar todos tus trackers hacia adelante o hacia atrás.
+    Se puede usar para ayudar con la calibración en ciertos juegos o aplicaciones
+    que pueden esperar tus trackers estando más adelante.
 skeleton_bone-SHOULDERS_DISTANCE = Distancia de los hombros
+skeleton_bone-SHOULDERS_DISTANCE-desc =
+    Esta es la distancia vertical desde la base de tu nuca hasta tus hombros.
+    Para ajustarlo, pon el largo del brazo superior en 0 y modifícalo hasta que tus trackers de codo virtuales
+    se alineen verticalmente con tus hombros reales.
 skeleton_bone-SHOULDERS_WIDTH = Ancho de los hombros
+skeleton_bone-SHOULDERS_WIDTH-desc =
+    Esta es la distancia horizontal desde la base de tu nuca hasta tus hombros.
+    Para ajustarlo, pon el largo del brazo superior en 0 y modifícalo hasta que tus trackers de codo virtuales
+    se alineen horizontalmente con tus hombros reales.
 skeleton_bone-arm_group = Largo del brazo
+skeleton_bone-arm_group-desc =
+    Esta es la distancia desde tus hombros hasta tus muñecas.
+    Para ajustarlo, ajusta la distancia de los hombros apropiadamente, pon la distancia de las manos Y
+    en 0 y modifícalo hasta que tus trackers de mano se alineen con tus muñecas.
 skeleton_bone-UPPER_ARM = Largo del brazo superior
+skeleton_bone-UPPER_ARM-desc =
+    Esta es la distancia desde tus hombros hasta tus codos.
+    Para ajustarlo, ajusta el largo de los brazos apropiadamente y modifícalo hasta que
+    tus trackers de codos se alineen con tus codos reales.
 skeleton_bone-LOWER_ARM = Distancia del antebrazo
+skeleton_bone-LOWER_ARM-desc =
+    Esta es la distancia desde tus codos hasta tus muñecas.
+    Para ajustarlo, ajusta el largo de los brazos apropiadamente y modifícalo hasta que
+    tus trackers de codos se alineen con tus codos reales.
 skeleton_bone-HAND_Y = Distancia Y de la mano
+skeleton_bone-HAND_Y-desc =
+    Esta es la distancia vertical desde tus muñecas hasta la mitad de tu mano.
+    Para ajustarlo para captura de movimiento, ajusta el largo de los brazos apropiadamente y modifícalo hasta que tus
+    trackers de manos se alineen verticalmente con el medio de tus manos.
+    Para ajustarlo para tracking de codo desde tus controles, pon el largo de los brazos en 0 y
+    modifícalo hasta que tus trackers de codos se alineen verticalmente con tus muñecas.
 skeleton_bone-HAND_Z = Distancia Z de la mano
+skeleton_bone-HAND_Z-desc =
+    Esta es la distancia horizontal desde tus muñecas hasta la mitad de tu mano.
+    Para ajustarlo para captura de movimiento, ponlo en 0.
+    Para ajustarlo para tracking de codos desde tus controles, pon el largo de los brazos en 0 y
+    modifícalo hasta que tus trackers de codos se alineen horizontalmente con tus muñecas.
 skeleton_bone-ELBOW_OFFSET = Desplazamiento del codo
+skeleton_bone-ELBOW_OFFSET-desc =
+    Esto se puede ajustar para mover tus trackers de codos virtuales hacia arriba o hacia abajo para ayudar
+    con VRChat accidentalmente colocando un tracker de codo al pecho.
 
 ## Tracker reset buttons
 
 reset-reset_all = Reiniciar todas las proporciones
-reset-reset_all_warning =
-    <b>Advertencia:</b> Esto reiniciará tus proporciones para ser basadas solamente en tu altura.
-    ¿Estás seguro de que quieres seguir?
+reset-reset_all_warning-v2 =
+    <b>Advertencia:</b> Sus proporciones se restablecerán a los valores predeterminados escalados a su altura configurada.
+    ¿Estás seguro de que quiere hacer esto?
 reset-reset_all_warning-reset = Reiniciar proporciones
 reset-reset_all_warning-cancel = Cancelar
+reset-reset_all_warning_default-v2 =
+    <b>Advertencia:</b> Su altura no ha sido configurada, sus proporciones se restablecerán a los valores predeterminados con la altura predeterminada.
+    ¿Estás seguro de que quieres hacer esto?
 reset-full = Reinicio completo
 reset-mounting = Reinicio de montura
 reset-yaw = Reinicio horizontal
@@ -153,6 +309,7 @@ widget-imu_visualizer-rotation_raw = Raw
 widget-imu_visualizer-rotation_preview = Preview
 widget-imu_visualizer-acceleration = Aceleración
 widget-imu_visualizer-position = Posición
+widget-imu_visualizer-stay_aligned = Mantente Alineado
 
 ## Widget: Skeleton Visualizer
 
@@ -180,6 +337,7 @@ tracker-table-column-temperature = Temp. °C
 tracker-table-column-linear-acceleration = Accel. X/Y/Z
 tracker-table-column-rotation = Rotación X/Y/Z
 tracker-table-column-position = Posición X/Y/Z
+tracker-table-column-stay_aligned = Mantente Alineado
 tracker-table-column-url = URL
 
 ## Tracker rotation
@@ -204,6 +362,7 @@ tracker-infos-url = URL del sensor
 tracker-infos-version = Versión del firmware
 tracker-infos-hardware_rev = Revisión del hardware
 tracker-infos-hardware_identifier = ID del hardware
+tracker-infos-data_support = Dato soportado
 tracker-infos-imu = Sensor IMU
 tracker-infos-board_type = Placa principal
 tracker-infos-network_version = Versión del protocolo
@@ -244,6 +403,12 @@ tracker-settings-name_section-label = Nombre del sensor
 tracker-settings-forget = Olvidar tracker
 tracker-settings-forget-description = Remueve el tracker del servidor de SlimeVR y lo previene de conectarse hasta que el servidor se reinicie. La configuración del tracker no se perderá.
 tracker-settings-forget-label = Olvidar tracker
+tracker-settings-update-unavailable = No se puede actualizar (DIY)
+tracker-settings-update-low-battery = No se puede actualizar. Batería por debajo del 50%
+tracker-settings-update-up_to_date = Actualizado
+tracker-settings-update-available = { $versionName } ya está disponible
+tracker-settings-update = Actualizar ahora
+tracker-settings-update-title = Versión del firmware
 
 ## Tracker part card info
 
@@ -310,6 +475,7 @@ mounting_selection_menu-close = Cerrar
 settings-sidebar-title = Ajustes
 settings-sidebar-general = General
 settings-sidebar-tracker_mechanics = Mecánicas del sensor
+settings-sidebar-stay_aligned = Mantente Alineado
 settings-sidebar-fk_settings = Ajustes de FK
 settings-sidebar-gesture_control = Control de gestos
 settings-sidebar-interface = Interfaz
@@ -319,6 +485,9 @@ settings-sidebar-utils = Utilidades
 settings-sidebar-serial = Consola serial
 settings-sidebar-appearance = Apariencia
 settings-sidebar-notifications = Notificaciones
+settings-sidebar-behavior = Comportamiento
+settings-sidebar-firmware-tool = Herramienta de firmware DIY
+settings-sidebar-vrc_warnings = Advertencias de la configuración de VRChat
 settings-sidebar-advanced = Avanzado
 
 ## SteamVR settings
@@ -400,6 +569,25 @@ settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
     Usa el magnetómetro en todos los trackers que tienen un firmware compatible, lo que reduce la desviación en entornos magnéticos estables.
     Se puede desactivar por sensor en la configuración del sensor. <b>¡Por favor, no apagues ninguno de los trackers mientras activas esta opción!</b>
 settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Usar magnetómetro en trackers
+settings-stay_aligned = Mantente Alineado
+settings-stay_aligned-description = Mantente Alineado reduce el desvío ajustando gradualmente tus trackers para calzar tus poses relajadas.
+settings-stay_aligned-setup-label = Configurar Mantente Alineado
+settings-stay_aligned-setup-description = Debes completar «Configurar Mantente Alineado» para activar Mantente Alineado.
+settings-stay_aligned-warnings-drift_compensation = ⚠ ¡Por favor desactiva la compensación de desvío! La compensación de desvío causará conflictos con Mantente Alineado.
+settings-stay_aligned-enabled-label = Ajustar trackers
+settings-stay_aligned-hide_yaw_correction-label = Ocultar ajustes (para comparar sin Mantente Alineado)
+settings-stay_aligned-general-label = General
+settings-stay_aligned-relaxed_poses-label = Poses relajadas
+settings-stay_aligned-relaxed_poses-description = Mantente Alineado utiliza tus poses relajadas para mantener tus trackers alineados. Utiliza «Configurar Mantente Alineado» para actualizar estas poses.
+settings-stay_aligned-relaxed_poses-standing = Ajustar trackers al estar parado
+settings-stay_aligned-relaxed_poses-sitting = Ajustar trackers al sentarse en una silla
+settings-stay_aligned-relaxed_poses-flat = Ajustar trackers al sentarse en el suelo o recostándose en su espalda.
+settings-stay_aligned-relaxed_poses-save_pose = Guardar pose
+settings-stay_aligned-relaxed_poses-reset_pose = Reiniciar pose
+settings-stay_aligned-relaxed_poses-close = Cerrar
+settings-stay_aligned-debug-label = Depuración
+settings-stay_aligned-debug-description = Por favor incluye tus ajustes cuando reportes problemas acerca de Mantente Alineado.
+settings-stay_aligned-debug-copy-label = Copiar ajustes al portapapeles
 
 ## FK/Tracking settings
 
@@ -423,6 +611,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = El plantado del
 settings-general-fk_settings-leg_fk = Tracking de piernas
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Activar reinicio de montura para el pie mediante el pararse de puntillas.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Reinicio de montura de pies
+settings-general-fk_settings-enforce_joint_constraints = Límites esqueléticos
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Imponer restricciones
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Evita que las articulaciones giren más allá de su límite
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Corregir con las limitaciones
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Corregir las rotaciones de las articulaciones cuando superan su límite
 settings-general-fk_settings-arm_fk = Trackeo de brazos
 settings-general-fk_settings-arm_fk-description = Cambia cómo el movimiento de los brazos es detectado.
 settings-general-fk_settings-arm_fk-force_arms = Forzar brazos desde el HMD
@@ -454,9 +647,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Prome
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Promediar la rotación del eje vertical y horizontal de las rodillas con la de los tobillos
 settings-general-fk_settings-self_localization-title = Modo mocap
 settings-general-fk_settings-self_localization-description = El modo mocap permite al esqueleto rastrear de forma aproximada su propia posición sin un casco o otros sensores. Nota que esto requiere que los trackers en el pie y cabeza estén y sigue siendo experimental.
-settings-general-fk_settings-vive_emulation-title = Vive emulation
-settings-general-fk_settings-vive_emulation-description = Emulate the waist tracker problems that Vive trackers have. This is a joke and makes tracking worse.
-settings-general-fk_settings-vive_emulation-label = Habilitar emulación de Vive
 
 ## Gesture control settings (tracker tapping)
 
@@ -497,9 +687,9 @@ settings-general-interface-dev_mode = Modo desarrollador
 settings-general-interface-dev_mode-description = Este modo puede ser útil si es que necesitas información a fondo o para un nivel de interacción más avanzado con los sensores conectados.
 settings-general-interface-dev_mode-label = Modo desarrollador
 settings-general-interface-theme = Tema de color
-settings-general-interface-show-navbar-onboarding = Mostrar "{ navbar-onboarding }" en la barra de navegación
+settings-general-interface-show-navbar-onboarding = Mostrar «{ navbar-onboarding }» en la barra de navegación
 settings-general-interface-show-navbar-onboarding-description = Esto cambia si el botón "{ navbar-onboarding }" se muestra en la barra de navegación.
-settings-general-interface-show-navbar-onboarding-label = Mostrar "{ navbar-onboarding }"
+settings-general-interface-show-navbar-onboarding-label = Mostrar «{ navbar-onboarding }»
 settings-general-interface-lang = Selecciona un idioma
 settings-general-interface-lang-description = Cambia el idioma que quieras usar.
 settings-general-interface-lang-placeholder = Selecciona el idioma a utilizar
@@ -528,6 +718,13 @@ settings-general-interface-feedback_sound-volume = Volumen del sonido de feedbac
 settings-general-interface-connected_trackers_warning = Advertencia de trackers conectados
 settings-general-interface-connected_trackers_warning-description = Esta opción hará que aparezca un pop-up cada vez que intentas salir de SlimeVR mientras tienes uno o más trackers conectados. Te recuerda de apagar tus trackers cuando ya paraste de usarlos así preservas la duración de la batería.
 settings-general-interface-connected_trackers_warning-label = Advertencia de trackers conectados al salir
+
+## Behavior settings
+
+settings-interface-behavior = Comportamiento
+settings-general-interface-dev_mode = Modo desarrollador
+settings-general-interface-dev_mode-description = Este modo puede ser útil si es que necesitas información a fondo o para un nivel de interacción más avanzado con los sensores conectados.
+settings-general-interface-dev_mode-label = Modo desarrollador
 settings-general-interface-use_tray = Minimizar a la bandeja del sistema
 settings-general-interface-use_tray-description = Permite cerrar la ventana sin cerrar el servidor de SlimeVR para que puedas continuar usándolo sin que te moleste la interfaz.
 settings-general-interface-use_tray-label = Minimizar a la bandeja del sistema
@@ -541,6 +738,14 @@ settings-general-interface-discord_presence-message =
         [many] Usando { $amount } de sensores
        *[other] Usando { $amount } sensores
     }
+settings-interface-behavior-error_tracking = Recopilación de errores a través de Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Consientes a la recopilación de datos de errores anonimizados?</h1>
+    
+    <b>No recopilamos información personal</b> como tu dirección IP o credenciales del Wi-Fi. ¡SlimeVR respeta tu privacidad!
+    
+    Para proveer la mejor experiencia de usuario, recopilamos reportes de errores anonimizados, métricas de rendimiento, e información del sistema operativo. Esto nos ayuda a detectar errores y problemas con SlimeVR. Estas métricas son recopiladas a través de Sentry.io.
+settings-interface-behavior-error_tracking-label = Enviar errores a los desarrolladores
 
 ## Serial settings
 
@@ -604,6 +809,13 @@ settings-osc-vrchat-description-v1 =
 settings-osc-vrchat-enable = Habilitar
 settings-osc-vrchat-enable-description = Habilita el envio y recibo de datos.
 settings-osc-vrchat-enable-label = Habilitar
+settings-osc-vrchat-oscqueryEnabled = Habilitar OSCQuery
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery detecta automáticamente las instancias en ejecución de VRChat y les envía datos.
+    También puede anunciarse a ellos para recibir datos del HMD y los mandos.
+    Para permitir la recepción de datos de HMD y mandos de VRChat, vaya a la configuración de su menú principal
+    en «Seguimiento e IK» y habilite «Permitir el envío de datos OSC de seguimiento de VR de cabeza y muñeca».
+settings-osc-vrchat-oscqueryEnabled-label = Habilitar OSCQuery
 settings-osc-vrchat-network = Puertos de conexión
 settings-osc-vrchat-network-description-v1 = Establece los puertos para recibir y enviar datos. Se puede dejar sin cambiar para VRChat.
 settings-osc-vrchat-network-port_in =
@@ -646,12 +858,7 @@ settings-osc-vmc-network-address-description = Establece la dirección donde se
 settings-osc-vmc-network-address-placeholder = Dirección IPv4
 settings-osc-vmc-vrm = Modelo VRM
 settings-osc-vmc-vrm-description = Carga un modelo VRM para permitir el anclaje de cabeza y habilitar una mejor compatibilidad con otras aplicaciones
-settings-osc-vmc-vrm-model_unloaded = Ningún modelo cargado
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Modelo cargado: { $name }
-       *[other] Modelo sin nombre cargado
-    }
+settings-osc-vmc-vrm-untitled_model = Modelo sin nombre
 settings-osc-vmc-vrm-file_select = Arrastra y suelta un modelo para usar, o <u>selecciona uno</u>.
 settings-osc-vmc-anchor_hip = Anclaje por cadera
 settings-osc-vmc-anchor_hip-description = Anclar el tracking a la cadera, útil para hacer de VTuber sentado. Si lo desactivas, carga un modelo VRM.
@@ -686,9 +893,12 @@ settings-utils-advanced-reset_warning =
     }
 settings-utils-advanced-reset_warning-reset = Reiniciar ajustes
 settings-utils-advanced-reset_warning-cancel = Cancelar
-settings-utils-advanced-open_data = Carpeta de datos
-settings-utils-advanced-open_data-description = Abre la carpeta de datos de SlimeVR en el explorador de archivos, conteniendo archivos de configuración y registros.
+settings-utils-advanced-open_data-v1 = Carpeta de configuración
+settings-utils-advanced-open_data-description-v1 = Abre la carpeta de configuración de SlimeVR en el explorador de archivos, que contiene la configuración
 settings-utils-advanced-open_data-label = Abrir carpeta
+settings-utils-advanced-open_logs = Carpeta de registros
+settings-utils-advanced-open_logs-description = Abre la carpeta de registros de SlimeVR en el explorador de archivos, que contiene los registros de la aplicación
+settings-utils-advanced-open_logs-label = Abrir carpeta
 
 ## Setup/onboarding menu
 
@@ -715,6 +925,7 @@ onboarding-wifi_creds-submit = ¡Enviar!
 onboarding-wifi_creds-ssid =
     .label = Nombre del WiFi
     .placeholder = Ingresa el nombre del WiFi
+onboarding-wifi_creds-ssid-required = Se requiere el nombre del Wi-Fi
 onboarding-wifi_creds-password =
     .label = Contraseña
     .placeholder = Ingresa la contraseña
@@ -772,12 +983,24 @@ onboarding-connect_tracker-issue-serial = ¡Tengo problemas conectándolos!
 onboarding-connect_tracker-usb = Sensor USB
 onboarding-connect_tracker-connection_status-none = Buscando sensores
 onboarding-connect_tracker-connection_status-serial_init = Conectando al dispositivo serial
+onboarding-connect_tracker-connection_status-obtaining_mac_address = Obteniendo la dirección MAC del sensor
 onboarding-connect_tracker-connection_status-provisioning = Enviando credenciales Wi-Fi
 onboarding-connect_tracker-connection_status-connecting = Enviando credenciales Wi-Fi
 onboarding-connect_tracker-connection_status-looking_for_server = Buscando servidor
 onboarding-connect_tracker-connection_status-connection_error = Incapaz de conectar al Wi-Fi
 onboarding-connect_tracker-connection_status-could_not_find_server = No se pudo encontrar el servidor
 onboarding-connect_tracker-connection_status-done = Conectado con el servidor
+onboarding-connect_tracker-connection_status-no_serial_log = No se pudieron obtener los registros del tracker
+onboarding-connect_tracker-connection_status-no_serial_device_found = No se pudo encontrar un tracker por USB
+onboarding-connect_serial-error-modal-no_serial_log = ¿El tracker esta encendido?
+onboarding-connect_serial-error-modal-no_serial_log-desc = Asegúrate de que el tracker esté encendido y conectado a tu computadora
+onboarding-connect_serial-error-modal-no_serial_device_found = No se detectan trackers
+onboarding-connect_serial-error-modal-no_serial_device_found-desc =
+    Por favor conecta un tracker con el cable usb hacia tu computadora y enciende el tracker.
+    Si esto no funciona:
+      - intenta con otro cable usb
+      - intenta con otro puerto usb
+      - intenta reinstalando el servidor de SlimeVR y selecciona «Drivers USB» en la sección de componentes
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -964,44 +1187,27 @@ onboarding-automatic_mounting-mounting_reset-title = Reinicio de montura
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Arrodíllate en una posición de «esquiar» con tus piernas dobladas, la parte superior de tu cuerpo inclinada hacia adelante, y tus brazos doblados.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Presiona el botón «Reinicio de montura» y espera 3 segundos hasta que se reinicie la montura.
 onboarding-automatic_mounting-preparation-title = Preparación
-onboarding-automatic_mounting-preparation-step-0 = 1. Párate derecho con tus brazos a los costados.
-onboarding-automatic_mounting-preparation-step-1 = 2. Presiona el botón «Reiniciar» y espera 3 segundos hasta que se reinicien los sensores.
+onboarding-automatic_mounting-preparation-v2-step-0 = 1. Presiona el botón «Reinicio completo».
+onboarding-automatic_mounting-preparation-v2-step-1 = 2. Párate recto con los brazos a tus lados. Asegúrate de mirar hacia adelante.
+onboarding-automatic_mounting-preparation-v2-step-2 = 3. Mantén la posición hasta que el temporizador de 3s termine.
 onboarding-automatic_mounting-put_trackers_on-title = Ponte tus sensores
 onboarding-automatic_mounting-put_trackers_on-description = Para calibrar la ubicación de tus monturas, usaremos los sensores que has asignado. Ponte todos tus sensores, puedes ver cuál es cual en la figura de la derecha.
 onboarding-automatic_mounting-put_trackers_on-next = Tengo puestos todos mis sensores
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = ¿Qué método de calibración de proporciones quiere usar?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    Las proporciones corporales son utilizadas para saber las medidas de tu cuerpo. Se requieren para calcular la posición de los trackers.
-    Cuando las proporciones de tu cuerpo no encajan con las guardadas, la precisión de tu tracking será peor y notarás cosas como deslizamiento o desplazamiento, o tu cuerpo no encajando bien con tu avatar.
-    <b>¡Solo necesitas medir tu cuerpo una vez!</b> A menos que estén mal o tu cuerpo haya cambiado, no necesitas hacerlo de nuevo.
-onboarding-choose_proportions-auto_proportions = Proporciones automáticas
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = Recomendado
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Esto estimará tus proporciones grabando una muestra de tus movimientos y pasándolos a través de un algoritmo.
-    
-    <b>¡Esto requiere tener tu visor (HMD) conectado a SlimeVR y en tu cabeza!</b>
-onboarding-choose_proportions-manual_proportions = Proporciones manuales
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = Para toques pequeños
-onboarding-choose_proportions-manual_proportions-description = Esto te permitirá ajustar tus proporciones manualmente de forma directa
-onboarding-choose_proportions-export = Exportar proporciones
-onboarding-choose_proportions-import = Importar proporciones
-onboarding-choose_proportions-import-success = Importado
-onboarding-choose_proportions-import-failed = Error
-onboarding-choose_proportions-file_type = Archivo de proporciones del cuerpo
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Volver al tutorial de reinicio
 onboarding-manual_proportions-title = Proporciones de cuerpo manuales
-onboarding-manual_proportions-precision = Ajuste con precisión
-onboarding-manual_proportions-auto = Calibración automática
-onboarding-manual_proportions-ratio = Ajustar por porcentajes
+onboarding-manual_proportions-fine_tuning_button = Ajustar automáticamente las proporciones
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Por favor conecte un visor VR para utilizar el ajuste automático
+onboarding-manual_proportions-export = Exportar proporciones
+onboarding-manual_proportions-import = Importar proporciones
+onboarding-manual_proportions-file_type = Archivo de proporciones del cuerpo
+onboarding-manual_proportions-normal_increment = Incremento normal
+onboarding-manual_proportions-precise_increment = Incremento preciso
+onboarding-manual_proportions-grouped_proportions = Proporciones agrupadas
+onboarding-manual_proportions-all_proportions = Todas las proporciones
+onboarding-manual_proportions-estimated_height = Altura de usuario estimada
 
 ## Tracker automatic proportions setup
 
@@ -1022,21 +1228,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Tu visor esta reportando datos posicionales al servidor de SlimeVR (esto generalmente significa tener SteamVR abierto y conectado a SlimeVR usando el driver de SlimeVR para SteamVR).
     Tus sensores están funcionando y están representando tus movimientos con precisión (ej: Realizaste un reinicio completo y se mueven en la dirección correcta cuando pateas, te agachas, te sientas, etc).
 onboarding-automatic_proportions-requirements-next = He leído los requisitos
-onboarding-automatic_proportions-check_height-title = Compruebe su altura
-onboarding-automatic_proportions-check_height-description = Utilizamos tu altura como base de nuestras mediciones utilizando la altura del VR como aproximación a tu altura real, ¡Pero es mejor que compruebes tú mismo si son correctas!
+onboarding-automatic_proportions-check_height-title-v3 = Mide la altura de tu visor
+onboarding-automatic_proportions-check_height-description-v2 = La altura de su casco (HMD) debe ser ligeramente menor que su altura total, ya que el casco está a la altura de sus ojos. Esta medida se utilizará como punto de partida para las proporciones de su cuerpo.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Por favor, pulse el botón mientras está <u>de pie</u> para calcular su altura. ¡Tienes unos 3 segundos después de pulsar el botón!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Empieza a medir mientras estás <u>de pié</u> para medir tu altura. Ten cuidado con no levantar tus manos más allá de tu visor, ¡Ya que esto puede afectar la medición!
 onboarding-automatic_proportions-check_height-guardian_tip =
     Si está utilizando un casco de VR portable, asegúrese de tener el guardián/
     barrera activado así la altura es detectada correctamente!
-onboarding-automatic_proportions-check_height-fetch_height = Estoy de pie
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Desconocida
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = La altura de tu HMD es
+onboarding-automatic_proportions-check_height-hmd_height2 = La altura de su casco es:
+onboarding-automatic_proportions-check_height-measure-start = Empezar a medir
+onboarding-automatic_proportions-check_height-measure-stop = Dejar de medir
+onboarding-automatic_proportions-check_height-measure-reset = Volver a intentar la medición
+onboarding-automatic_proportions-check_height-next_step = Usar la altura del visor
+onboarding-automatic_proportions-check_floor_height-title = Medir la altura de su piso (opcional)
+onboarding-automatic_proportions-check_floor_height-description = En algunos casos, es posible que el casco no ajuste correctamente la altura del piso, lo que hace que la altura del casco sea más alta de lo que debería ser. Puede medir la "altura" de su piso para corregir la altura de su casco.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Empieza la medición y pon un mando en el piso para medir la altura. Si estás seguro de que la altura de tu piso es correcta, puedes saltar este paso.
 # Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = entonces tu altura real es
-onboarding-automatic_proportions-check_height-next_step = Están bien
+onboarding-automatic_proportions-check_floor_height-floor_height = La altura de su piso es:
+onboarding-automatic_proportions-check_floor_height-full_height = Su altura total estimada es:
+onboarding-automatic_proportions-check_floor_height-measure-start = Empezar a medir
+onboarding-automatic_proportions-check_floor_height-measure-stop = Dejar de medir
+onboarding-automatic_proportions-check_floor_height-measure-reset = Volver a intentar la medición
+onboarding-automatic_proportions-check_floor_height-skip_step = Saltar paso y guardar
+onboarding-automatic_proportions-check_floor_height-next_step = Utilice la altura del piso y guardar
 onboarding-automatic_proportions-start_recording-title = Prepárate para moverte
 onboarding-automatic_proportions-start_recording-description = Ahora vamos a grabar poses y movimientos en específico. Estas serán mostradas en la siguiente ventana. ¡Prepárate para empezar cuando presiones el botón!
 onboarding-automatic_proportions-start_recording-next = Empezar grabación
@@ -1071,6 +1289,70 @@ onboarding-automatic_proportions-error_modal-v2 =
     Esto es posiblemente debido a un problema con la calibración de montura. Asegúrate de que tu tracking funcione adecuadamente antes de intentarlo nuevamente.
     Por favor <docs>revisa la documentación</docs> o únete a nuestro <discord>Discord</discord> por ayuda ^_^
 onboarding-automatic_proportions-error_modal-confirm = ¡Entendido!
+onboarding-automatic_proportions-smol_warning =
+    La altura configurada de { $height } es menor que la altura mínima aceptada de { $minHeight }.
+    <b>Por favor vuelva a hacer las mediciones y asegúrese de que sean correctas.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Volver
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = Proporciones escaladas
+onboarding-scaled_proportions-description = Para que los trackers SlimeVR funcionen, necesitamos saber el largo de sus huesos. Esto usará una proporción promedia y la escalará en función a su altura.
+onboarding-scaled_proportions-manual_height-title = Ajuste su altura
+onboarding-scaled_proportions-manual_height-description-v2 = Esta altura se utilizará como referencia para las proporciones de su cuerpo.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR no está conectado actualmente a SlimeVR, por lo que las mediciones no se pueden basar en su casco. <b>¡Proceda bajo su propio riesgo o consulte la documentación!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = Su altura total es
+onboarding-scaled_proportions-manual_height-estimated_height = La altura estimada de su visor es:
+onboarding-scaled_proportions-manual_height-next_step = Continuar y guardar
+onboarding-scaled_proportions-manual_height-warning =
+    Actualmente estás utilizando la manera manual para configurar las proporciones escaladas!
+    
+    <b>Este modo solo es recomendado si no utilizas un HMD con SlimeVR</b>
+    
+    Para poder utilizar las proporciones escaladas automáticas, por favor:
+onboarding-scaled_proportions-manual_height-warning-no_hmd = Conecta un visor VR
+onboarding-scaled_proportions-manual_height-warning-no_controllers = Asegurate de que tus mandos están conectados y correctamente asignados a tus manos
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = Reestablecer las proporciones de su cuerpo
+onboarding-scaled_proportions-reset_proportion-description = Para establecer las proporciones de su cuerpo en función a su altura, ahora debe restablecer todas sus proporciones. Esto borrará las proporciones que haya configurado y proporcionará una configuración de referencia.
+onboarding-scaled_proportions-done-title = Proporciones corporales guardadas
+onboarding-scaled_proportions-done-description = Las proporciones de su cuerpo ahora deberían estar configuradas en función de su altura.
+
+## Stay Aligned setup
+
+onboarding-stay_aligned-title = Mantente Alineado
+onboarding-stay_aligned-description = Configura Mantente Alineado para mantener tus trackers alineados.
+onboarding-stay_aligned-put_trackers_on-title = Ponte tus trackers
+onboarding-stay_aligned-put_trackers_on-description = Para guardar tus poses de descanso, usaremos los trackers que acabas de asignar. Colócate todos tus trackers, puedes ver cuál es cuál en la figura de la derecha.
+onboarding-stay_aligned-put_trackers_on-trackers_warning = ¡Tienes menos de 5 trackers actualmente conectados y asignados! Este es el monto mínimo de trackers requeridos para que Mantente Alineado funcione apropiadamente.
+onboarding-stay_aligned-put_trackers_on-next = Tengo puestos todos mis sensores
+onboarding-stay_aligned-verify_mounting-title = Revisa tu montura
+onboarding-stay_aligned-verify_mounting-step-0 = Mantente Alineado requiere buena montura. De otra manera, no obtendrás una buena experiencia con Mantente Alineado.
+onboarding-stay_aligned-verify_mounting-step-1 = 1. Camina mientras estás parado.
+onboarding-stay_aligned-verify_mounting-step-2 = 2. Siéntate y mueve tus piernas y pies.
+onboarding-stay_aligned-verify_mounting-step-3 = 3. Si tus trackers no están en el lugar correcto, presiona «Reiniciar calibración de montura»
+onboarding-stay_aligned-verify_mounting-redo_mounting = Reiniciar calibración de montura
+onboarding-stay_aligned-preparation-title = Preparación
+onboarding-stay_aligned-preparation-tip = Asegúrate de pararte recto. Debes estar mirando hacia enfrente y tus brazos deben estar hacia tus lados.
+onboarding-stay_aligned-relaxed_poses-standing-title = Pose de pie relajada
+onboarding-stay_aligned-relaxed_poses-standing-step-0 = 1. Párate en una posición cómoda. ¡Relájate!
+onboarding-stay_aligned-relaxed_poses-standing-step-1-v2 = 2. Presiona el botón «Guardar pose».
+onboarding-stay_aligned-relaxed_poses-sitting-title = Pose sentado en silla relajada
+onboarding-stay_aligned-relaxed_poses-sitting-step-0 = 1. Siéntate en una posición cómoda. ¡Relajate!
+onboarding-stay_aligned-relaxed_poses-sitting-step-1-v2 = 2. Presiona el botón «Guardar pose».
+onboarding-stay_aligned-relaxed_poses-flat-title = Pose sentado en piso relajada
+onboarding-stay_aligned-relaxed_poses-flat-step-0 = 1. Siéntate en el piso con tus piernas en frente ¡Relájate!
+onboarding-stay_aligned-relaxed_poses-flat-step-1-v2 = 2. Presiona el botón «Guardar pose».
+onboarding-stay_aligned-relaxed_poses-skip_step = Saltar
+onboarding-stay_aligned-done-title = ¡Mantente Alineado activado!
+onboarding-stay_aligned-done-description = ¡Tu configuración de Mantente Alineado está completa!
+onboarding-stay_aligned-done-description-2 = ¡Configuración completa! Puedes reiniciar el proceso si quieres re-calibrar las poses
+onboarding-stay_aligned-previous_step = Atrás
+onboarding-stay_aligned-next_step = Siguiente
+onboarding-stay_aligned-restart = Reiniciar
+onboarding-stay_aligned-done = Hecho
 
 ## Home
 
@@ -1095,6 +1377,149 @@ status_system-StatusSteamVRDisconnected =
     }
 status_system-StatusTrackerError = El tracker { $trackerName } tiene un error.
 status_system-StatusUnassignedHMD = El casco de RV debe ser asignado como un sensor de cabeza.
+status_system-StatusPublicNetwork = Tu perfil de red está actualmente configurado como Público. Esto no es recomendado para el correcto funcionamiento de SlimeVR. <PublicFixLink>Ve como arreglarlo aquí.</PublicFixLink>
+
+## Firmware tool globals
+
+firmware_tool-next_step = Siguiente paso
+firmware_tool-previous_step = Paso anterior
+firmware_tool-ok = Se ve bien
+firmware_tool-retry = Reintentar
+firmware_tool-loading = Cargando...
+
+## Firmware tool Steps
+
+firmware_tool = Herramienta de firmware DIY
+firmware_tool-description = Le permite configurar y actualizar sus sensores construidos por usted
+firmware_tool-not_available = Vaya, la herramienta de firmware no está disponible en este momento. ¡Vuelva más tarde!
+firmware_tool-not_compatible = La herramienta de firmware no es compatible con esta versión del servidor. ¡Por favor, actualice la app!
+firmware_tool-board_step = Seleccione su placa
+firmware_tool-board_step-description = Seleccione una de las placas que se enumeran a continuación.
+firmware_tool-board_pins_step = Revisar los pines
+firmware_tool-board_pins_step-description =
+    Verifique que los pines seleccionados sean correctos.
+    Si siguió la documentación de SlimeVR, los valores predeterminados deben ser correctos
+firmware_tool-board_pins_step-enable_led = Habilitar LED
+firmware_tool-board_pins_step-led_pin =
+    .label = Pin del LED
+    .placeholder = Ingrese la dirección pin del LED
+firmware_tool-board_pins_step-battery_type = Seleccione el tipo de batería
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Batería externa
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Batería interna
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = MCP3021 interno
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = Pin del sensor de batería
+    .placeholder = Ingrese la dirección pin del sensor de batería
+firmware_tool-board_pins_step-battery_resistor =
+    .label = Resistencia de la batería (Ohmios)
+    .placeholder = Ingrese el valor de la resistencia de la batería.
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = Shield de la batería R1 (Ohmios).
+    .placeholder = Ingrese el valor del shield de la batería R1.
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = Shield de la batería R2 (Ohmios).
+    .placeholder = Ingrese el valor del shield de la batería R2.
+firmware_tool-add_imus_step = Declare sus IMUs
+firmware_tool-add_imus_step-description =
+    Por favor añada las IMU que tiene su sensor
+    Si siguió la documentación de SlimeVR, los valores predeterminados deben ser correctos
+firmware_tool-add_imus_step-imu_type-label = Tipo de IMU
+firmware_tool-add_imus_step-imu_type-placeholder = Seleccione el tipo de IMU
+firmware_tool-add_imus_step-imu_rotation =
+    .label = Rotación del IMU (grados)
+    .placeholder = Ángulo de rotación del IMU
+firmware_tool-add_imus_step-scl_pin =
+    .label = Pin SCL
+    .placeholder = Dirección pin SCL
+firmware_tool-add_imus_step-sda_pin =
+    .label = Pin SDA
+    .placeholder = Dirección pin SDA
+firmware_tool-add_imus_step-int_pin =
+    .label = Pin INT
+    .placeholder = Dirección pin INT
+firmware_tool-add_imus_step-optional_tracker =
+    .label = Sensor opcional
+firmware_tool-add_imus_step-show_less = Mostrar menos
+firmware_tool-add_imus_step-show_more = Mostrar más
+firmware_tool-add_imus_step-add_more = Agregar más IMUs
+firmware_tool-select_firmware_step = Seleccione la versión del firmware
+firmware_tool-select_firmware_step-description = Por favor elija la versión del firmware que desea utilizar
+firmware_tool-select_firmware_step-show-third-party =
+    .label = Mostrar firmwares de terceros
+firmware_tool-flash_method_step = Método de flasheo
+firmware_tool-flash_method_step-description = Por favor seleccione el método de flasheo que desea utilizar
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Utilice el método por aire (OTA). Su sensor utilizará Wi-Fi para actualizar su firmware. Funciona sólo en sensores ya configurados.
+firmware_tool-flash_method_step-serial =
+    .label = Serial
+    .description = Utilice un cable USB para actualizar su sensor.
+firmware_tool-flashbtn_step = Presione el botón de boot
+firmware_tool-flashbtn_step-description = Antes de pasar al siguiente paso, hay algunas cosas que debe hacer
+firmware_tool-flashbtn_step-board_SLIMEVR = Apague el sensor, retire la carcasa (si la hay), conecte un cable USB a esta computadora y, a continuación, realice uno de los siguientes pasos de acuerdo con la revisión de la placa SlimeVR:
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Encienda el sensor mientras cortocircuita el segundo FLASH pad rectangular desde el borde en la parte superior de la placa y el protector metálico del microcontrolador.
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Encienda el sensor mientras cortocircuita el FLASH pad circular en la parte superior de la placa y el escudo metálico del microcontrolador.
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Encienda el sensor mientras presiona el botón FLASH en la parte superior de la placa
+firmware_tool-flashbtn_step-board_OTHER =
+    Antes de flashear, probablemente tendrá que poner el sensor en modo bootloader.
+    La mayoría de las veces, esto significa presionar el botón de boot en la placa antes de que comience el proceso de flasheo. Si el proceso de flasheo se agota al comienzo, probablemente significa que el sensor no estaba en modo bootloader. 
+    Por favor, consulte las instrucciones de flasheo de su placa para saber cómo activar el modo bootloader.
+firmware_tool-flash_method_ota-devices = Dispositivos OTA detectados:
+firmware_tool-flash_method_ota-no_devices = No hay placas que se puedan actualizar mediante OTA, asegúrese de seleccionar el tipo de placa correcto
+firmware_tool-flash_method_serial-wifi = Credenciales del Wi-Fi:
+firmware_tool-flash_method_serial-devices-label = Dispositivos serial detectados:
+firmware_tool-flash_method_serial-devices-placeholder = Seleccione un dispositivo serial
+firmware_tool-flash_method_serial-no_devices = No se han detectado dispositivos serial compatibles, asegúrese de que el sensor esté conectado
+firmware_tool-build_step = Compilando
+firmware_tool-build_step-description = El firmware se está compilando, por favor espere
+firmware_tool-flashing_step = Flasheando
+firmware_tool-flashing_step-description = Sus sensores se están flasheando, por favor siga las instrucciones en la pantalla
+firmware_tool-flashing_step-warning-v2 = No desconectes o apagues el tracker durante el proceso de subida a menos que se te indique, puede causar que tu placa quede inutilizable.
+firmware_tool-flashing_step-flash_more = Flashear más sensores
+firmware_tool-flashing_step-exit = Salir
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = Creando la carpeta de compilación
+firmware_tool-build-DOWNLOADING_FIRMWARE = Descargando el firmware
+firmware_tool-build-EXTRACTING_FIRMWARE = Extrayendo el firmware
+firmware_tool-build-SETTING_UP_DEFINES = Configurando las definiciones
+firmware_tool-build-BUILDING = Compilando el firmware
+firmware_tool-build-SAVING = Guardando la compilación
+firmware_tool-build-DONE = Compilación completa
+firmware_tool-build-ERROR = No se pudo compilar el firmware
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = Descargando el firmware
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = Por favor apaga tu tracker y enciéndelo de nuevo
+firmware_update-status-AUTHENTICATING = Autenticando con el microcontrolador
+firmware_update-status-UPLOADING = Cargando el firmware
+firmware_update-status-SYNCING_WITH_MCU = Sincronizando con el microcontrolador
+firmware_update-status-REBOOTING = Aplicando la actualización
+firmware_update-status-PROVISIONING = Configurando las credenciales del Wi-Fi
+firmware_update-status-DONE = ¡Actualización completa!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = No se pudo encontrar el dispositivo
+firmware_update-status-ERROR_TIMEOUT = Se agotó el tiempo de espera del proceso de actualización
+firmware_update-status-ERROR_DOWNLOAD_FAILED = No se pudo descargar el firmware
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = No se pudo autenticar con el microcontrolador
+firmware_update-status-ERROR_UPLOAD_FAILED = No se pudo cargar el firmware
+firmware_update-status-ERROR_PROVISIONING_FAILED = No se pudieron configurar las credenciales del Wi-Fi
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = El método de actualización no es compatible
+firmware_update-status-ERROR_UNKNOWN = Error desconocido
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = Actualización de firmware
+firmware_update-devices = Dispositivos disponibles
+firmware_update-devices-description = Seleccione los sensores que desea actualizar a la última versión del firmware de SlimeVR
+firmware_update-no_devices = ¡Asegúrese de que los sensores que desea actualizar estén encendidos y conectados al Wi-Fi!
+firmware_update-changelog-title = Actualizando a { $version }
+firmware_update-looking_for_devices = Buscando dispositivos para actualizar...
+firmware_update-retry = Reintentar
+firmware_update-update = Actualizar sensores seleccionados
+firmware_update-exit = Salir
 
 ## Tray Menu
 
@@ -1123,3 +1548,53 @@ unknown_device-modal-description =
     ¿Lo quieres conectar a SlimeVR?
 unknown_device-modal-confirm = ¡Claro!
 unknown_device-modal-forget = Ignorarlo
+# VRChat config warnings
+vrc_config-page-title = Advertencias de la configuración de VRChat
+vrc_config-page-desc = Esta página muestra el estado de tus ajustes de VRChat y muestra que ajustes son incompatibles con SlimeVR. Es altamente recomendado que arregles cualquier advertencia mostrada aquí para la mejor experiencia de usuario con SlimeVR.
+vrc_config-page-help = ¿No puedes encontrar los ajustes?
+vrc_config-page-help-desc = ¡Revisa nuestra <a>documentación en este tema!</a>
+vrc_config-page-big_menu = Tracking e IK (Menú Grande)
+vrc_config-page-big_menu-desc = Ajustes relacionados a IK en el menú de ajustes grande
+vrc_config-page-wrist_menu = Tracking e IK (Menú de Muñeca)
+vrc_config-page-wrist_menu-desc = Ajustes relacionados a IK en el menú de ajustes pequeño (menú de muñeca)
+vrc_config-on = Encendido
+vrc_config-off = Apagado
+vrc_config-invalid = ¡Tienes ajustes de VRChat mal configurados!
+vrc_config-show_more = Mostrar más
+vrc_config-setting_name = Nombre del ajuste de VRChat
+vrc_config-recommended_value = Valor recomendado
+vrc_config-current_value = Valor actual
+vrc_config-mute = Silenciar advertencia
+vrc_config-mute-btn = Silenciar
+vrc_config-unmute-btn = De-silenciar
+vrc_config-legacy_mode = Usar solución de IK de legado
+vrc_config-disable_shoulder_tracking = Desactivar tracking de hombros
+vrc_config-shoulder_width_compensation = Compensación de ancho de hombros
+vrc_config-spine_mode = Modo columna de FBT
+vrc_config-tracker_model = Modelo de tracker FBT
+vrc_config-avatar_measurement_type = Medida de avatar
+vrc_config-calibration_range = Rango de calibración
+vrc_config-calibration_visuals = Mostrar visualización de calibración
+vrc_config-user_height = Altura real del usuario
+vrc_config-spine_mode-UNKNOWN = Desconocido
+vrc_config-spine_mode-LOCK_BOTH = Bloquear ambas
+vrc_config-spine_mode-LOCK_HEAD = Bloquear cabeza
+vrc_config-spine_mode-LOCK_HIP = Bloquear cadera
+vrc_config-tracker_model-UNKNOWN = Desconocido
+vrc_config-tracker_model-AXIS = Eje
+vrc_config-tracker_model-BOX = Caja
+vrc_config-tracker_model-SPHERE = Esfera
+vrc_config-tracker_model-SYSTEM = Sistema
+vrc_config-avatar_measurement_type-UNKNOWN = Desconocido
+vrc_config-avatar_measurement_type-HEIGHT = Altura
+vrc_config-avatar_measurement_type-ARM_SPAN = Longitud del brazo
+
+## Error collection consent modal
+
+error_collection_modal-title = ¿Podemos recopilar errores?
+error_collection_modal-description_v2 =
+    { settings-interface-behavior-error_tracking-description_v2 }
+    
+    Tu puedes cambiar esta configuración más tarde en la sección de comportamiento de la pagina de configuración.
+error_collection_modal-confirm = Acepto
+error_collection_modal-cancel = No quiero

gui/public/i18n/es-ES/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Conectándose al servidor
 websocket-connection_lost = Conexión con el servidor perdida. Intentando reconectar...
+websocket-connection_lost-desc = Parece que el servidor de SlimeVR ha dejado de funcionar. Revise los registros y reinicie el programa
+websocket-timedout = No se ha podido conectar al servidor
+websocket-timedout-desc = Parece que el servidor de SlimeVR ha dejado de funcionar o se agotó el tiempo de espera de la conexión. Revise los registros y reinicie el programa
+websocket-error-close = Salir de SlimeVR
+websocket-error-logs = Abra la carpeta de registros
 
 ## Update notification
 
@@ -49,13 +54,74 @@ body_part-LEFT_HAND = Mano izquierda
 body_part-LEFT_UPPER_LEG = Muslo izquierdo
 body_part-LEFT_LOWER_LEG = Tobillo Izquierdo
 body_part-LEFT_FOOT = Pie izquierdo
+body_part-LEFT_THUMB_METACARPAL = Metacarpiano del pulgar izquierdo
+body_part-LEFT_THUMB_PROXIMAL = Proximal del pulgar izquierdo
+body_part-LEFT_THUMB_DISTAL = Distal del pulgar izquierdo
+body_part-LEFT_INDEX_PROXIMAL = Proximal del índice izquierdo
+body_part-LEFT_INDEX_INTERMEDIATE = Intermedio del índice izquierdo
+body_part-LEFT_INDEX_DISTAL = Distal del indice izquierdo
+body_part-LEFT_MIDDLE_PROXIMAL = Proximal del medio izquierdo
+body_part-LEFT_MIDDLE_INTERMEDIATE = Intermedio del medio izquierdo
+body_part-LEFT_MIDDLE_DISTAL = Distal del medio izquierdo
+body_part-LEFT_RING_PROXIMAL = Proximal del anular izquierdo
+body_part-LEFT_RING_INTERMEDIATE = Intermedio de anular izquierdo
+body_part-LEFT_RING_DISTAL = Distal del anular izquierdo
+body_part-LEFT_LITTLE_PROXIMAL = Proximal del meñique izquierdo
+body_part-LEFT_LITTLE_INTERMEDIATE = Intermedio del meñique izquierdo
+body_part-LEFT_LITTLE_DISTAL = Distal del meñique izquierdo
+body_part-RIGHT_THUMB_METACARPAL = Metacarpiano del pulgar derecho
+body_part-RIGHT_THUMB_PROXIMAL = Proximal del pulgar derecho
+body_part-RIGHT_THUMB_DISTAL = Distal del pulgar derecho
+body_part-RIGHT_INDEX_PROXIMAL = Proximal del indice derecho
+body_part-RIGHT_INDEX_INTERMEDIATE = Indermedio del indice derecho
+body_part-RIGHT_INDEX_DISTAL = Distal del indice derecho
+body_part-RIGHT_MIDDLE_PROXIMAL = Proximal del medio derecho
+body_part-RIGHT_MIDDLE_INTERMEDIATE = Intermedio del medio derecho
+body_part-RIGHT_MIDDLE_DISTAL = Distal del medio derecho
+body_part-RIGHT_RING_PROXIMAL = Proximal del anular derecho
+body_part-RIGHT_RING_INTERMEDIATE = Intermedio del anular derecho
+body_part-RIGHT_RING_DISTAL = Distal del anular derecho
+body_part-RIGHT_LITTLE_PROXIMAL = Proximal del meñique derecho
+body_part-RIGHT_LITTLE_INTERMEDIATE = Intermedio del meñique derecho
+body_part-RIGHT_LITTLE_DISTAL = Distal del meñique derecho
+
+## BoardType
+
+board_type-UNKNOWN = Desconocido
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Placa Desconocida
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = Guante SlimeVR Dev IMU
 
 ## Proportions
 
 skeleton_bone-NONE = Ninguno
 skeleton_bone-HEAD = Desplazamiento de la cabeza
 skeleton_bone-NECK = Longitud del cuello
+skeleton_bone-NECK-desc =
+    Esta es la distancia desde el medio de tu cabeza hasta la base de tu cuello.
+    Para ajustarla, mueve tu cabeza para arriba y abajo como si estuvieras asintiendo
+    o inclinalo a la izquierda y la derecha, continuando modificando
+    hasta que el movimiento en otros rastreadores es insignificante.
 skeleton_bone-torso_group = Longitud del torso
+skeleton_bone-torso_group-desc =
+    Esta es la distacia desde la base de tu cuello hasta tus caderas.
+    Para ajustarla, modifícala mientras estes de pie derecho hasta que tus caderas virtuales
+    estan en posicion con las verdaderas.
 skeleton_bone-UPPER_CHEST = Longitud del torso superior
 skeleton_bone-CHEST_OFFSET = Compensacion del pecho
 skeleton_bone-CHEST = Longitud del pecho
@@ -81,6 +147,14 @@ skeleton_bone-ELBOW_OFFSET = Compensacion de los codos
 ## Tracker reset buttons
 
 reset-reset_all = Reiniciar todas las proporciones
+reset-reset_all_warning-v2 =
+    <b>Advertencia:</b> Sus proporciones se restablecerán a los valores predeterminados escalados a su altura configurada.
+    ¿Estás seguro de que quiere hacer esto?
+reset-reset_all_warning-reset = Restablecer proporciones
+reset-reset_all_warning-cancel = Cancelar
+reset-reset_all_warning_default-v2 =
+    <b>Advertencia:</b> Su altura no ha sido configurado, sus proporciones se restablecerán a los valores predeterminados con la altura predeterminada.
+    ¿Estás seguro de que quieres hacer esto?
 reset-full = Reinicio completo
 reset-mounting = Reiniciar montura
 reset-yaw = Restablecimiento horizontal
@@ -142,8 +216,12 @@ widget-developer_mode-more_info = Más información
 ## Widget: IMU Visualizer
 
 widget-imu_visualizer = Rotación
+widget-imu_visualizer-preview = Previsualización
+widget-imu_visualizer-hide = Ocultar
 widget-imu_visualizer-rotation_raw = Sin filtrar
 widget-imu_visualizer-rotation_preview = Previsualización
+widget-imu_visualizer-acceleration = Aceleración
+widget-imu_visualizer-position = Posición
 
 ## Widget: Skeleton Visualizer
 
@@ -195,9 +273,17 @@ tracker-infos-url = URL del Tracker
 tracker-infos-version = Versión del firmware
 tracker-infos-hardware_rev = Revisión del hardware
 tracker-infos-hardware_identifier = ID de hardware
+tracker-infos-data_support = Soporte de datos
 tracker-infos-imu = Sensor IMU
 tracker-infos-board_type = Placa principal
 tracker-infos-network_version = Versión de protocolo
+tracker-infos-magnetometer = Magnetómetro
+tracker-infos-magnetometer-status-v1 =
+    { $status ->
+        [DISABLED] Deshabilitado
+        [ENABLED] Habilitado
+       *[NOT_SUPPORTED] Incompatible
+    }
 
 ## Tracker settings
 
@@ -212,14 +298,28 @@ tracker-settings-mounting_section-edit = Editar montura
 tracker-settings-drift_compensation_section = Permitir compensación de drift
 tracker-settings-drift_compensation_section-description = ¿Debería este tracker compensar el drifteo cuando la compensación de drifteo está activada?
 tracker-settings-drift_compensation_section-edit = Permitir compensación de drift
+tracker-settings-use_mag = Permitir magnetómetro en este tracker
+# Multiline!
+tracker-settings-use_mag-description =
+    ¿Debería este tracker usar el magnetómetro para reducir el drift cuando se permita el uso de este? <b>¡Por favor, no apague su tracker mientras activas esto!</b>
+    
+    Primero debe permitir el uso del magnetómetro, <magSetting>haga clic aquí para ir a la configuración</magSetting>.
+tracker-settings-use_mag-label = Permitir magnetómetro
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = Nombre del tracker
 tracker-settings-name_section-description = Dale un sobrenombre lindo :)
 tracker-settings-name_section-placeholder = Pata izquierda del Eevee
+tracker-settings-name_section-label = Nombre del tracker
 tracker-settings-forget = Olvidar tracker
 tracker-settings-forget-description = Elimina el tracker del servidor SlimeVR y evita que se conecte a él hasta que se reinicie el servidor. La configuración del tracker no se perderá.
 tracker-settings-forget-label = Olvidar tracker
+tracker-settings-update-unavailable = No se puede actualizar (DIY)
+tracker-settings-update-low-battery = No se puede actualizar. Batería inferior al 50%
+tracker-settings-update-up_to_date = Actualizado
+tracker-settings-update-available = { $versionName } ya esta disponible
+tracker-settings-update = Actualizar ahora
+tracker-settings-update-title = Versión del firmware
 
 ## Tracker part card info
 
@@ -295,6 +395,9 @@ settings-sidebar-utils = Utilidades
 settings-sidebar-serial = Consola serial
 settings-sidebar-appearance = Apariencia
 settings-sidebar-notifications = Notificaciones
+settings-sidebar-behavior = Comportamiento
+settings-sidebar-firmware-tool = Herramienta de firmware DIY
+settings-sidebar-advanced = Avanzado
 
 ## SteamVR settings
 
@@ -347,6 +450,19 @@ settings-general-tracker_mechanics-drift_compensation-description =
     Compensa la desviación horizontal del IMU aplicando una rotación inversa.
     Cambia la cantidad de compensación y de reinicios que se tienen en cuenta.
 settings-general-tracker_mechanics-drift_compensation-enabled-label = Compensación en la desviación
+settings-general-tracker_mechanics-drift_compensation-prediction = Predicción de compensación de drift
+# This cares about multilines
+settings-general-tracker_mechanics-drift_compensation-prediction-description =
+    Predice la compensación de drift horizontal más allá del rango medido anteriormente.
+    Habilite esta opción si sus rastreadores están girando continuamente en el eje horizontal.
+settings-general-tracker_mechanics-drift_compensation-prediction-label = Predicción de compensación de drift
+settings-general-tracker_mechanics-drift_compensation_warning =
+    <b>Advertencia:</b> Utilice la compensación de drift solo si necesita restablecer
+    muy a menudo (cada ~5-10 minutos).
+    
+    Algunas IMU propensas a restablecimientos frecuentes incluyen:
+    Joy-Cons, owoTrack y MPUs (sin firmware reciente).
+settings-general-tracker_mechanics-drift_compensation_warning-cancel = Cancelar
 settings-general-tracker_mechanics-drift_compensation_warning-done = Yo entiendo
 settings-general-tracker_mechanics-drift_compensation-amount-label = Cantidad de compensación
 settings-general-tracker_mechanics-drift_compensation-max_resets-label = Usar los últimos X reinicios.
@@ -355,6 +471,12 @@ settings-general-tracker_mechanics-save_mounting_reset-description =
     Guarda las calibraciones de reajuste de montaje automático para los trackers entre reinicios. Útil 
     cuando se lleva un traje en el que los trackers no se mueven entre sesiones. <b>No recomendado para usuarios normales!</b>
 settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Guardar restablecimiento de montaje
+settings-general-tracker_mechanics-use_mag_on_all_trackers = Usar el magnetómetro en todos los trackers IMU que lo soporten
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    Utiliza el magnetómetro en todos los trackers que tienen un firmware compatible con él, lo que reduce el drift en entornos magnéticos estables.
+    Se puede desactivar por rastreador en la configuración de los trackers. <b>¡Por favor, no apagues ninguno de los trackers mientras activas esta opción!</b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Usar magnetómetro en los rastreadores
+settings-stay_aligned-relaxed_poses-close = Cierra
 
 ## FK/Tracking settings
 
@@ -378,6 +500,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = El plantado de p
 settings-general-fk_settings-leg_fk = Tracking de piernas
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Habilitar reinicio de montura de los pies al estar de puntillas.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Reinicio de montura de los pies.
+settings-general-fk_settings-enforce_joint_constraints = Límites esqueléticos
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Imponer restricciones
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Evita que las articulaciones giren más allá de su límite
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Corregir con las limitaciones
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Corregir las rotaciones de las articulaciones cuando superan su límite
 settings-general-fk_settings-arm_fk = Tracking de brazos
 settings-general-fk_settings-arm_fk-description = Forzar el seguimiento de los brazos desde el HMD incluso si hay datos de posición de la mano disponibles.
 settings-general-fk_settings-arm_fk-force_arms = Forzar brazos desde el HMD
@@ -409,9 +536,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Prome
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Promedia el balanceo de las rodillas con la de los tobillos
 settings-general-fk_settings-self_localization-title = Modo Captura de movimiento
 settings-general-fk_settings-self_localization-description = El modo captura de movimiento permite al esqueleto seguir aproximadamente tu posición sin auriculares ni otros trackers. Ten en cuenta que esto requiere trrackers de pies y cabeza para funcionar y que aún está en fase experimental.
-settings-general-fk_settings-vive_emulation-title = Emulación Vive
-settings-general-fk_settings-vive_emulation-description = Emula los problemas de cintura que lo Vive trackers producen. Es una broma y produce peor tracking.
-settings-general-fk_settings-vive_emulation-label = Habilitar emulación Vive
 
 ## Gesture control settings (tracker tapping)
 
@@ -422,9 +546,9 @@ settings-general-gesture_control-description = Permite que los reinicios se acti
 # $amount (Number) - Amount of taps (touches to the tracker's case)
 settings-general-gesture_control-taps =
     { $amount ->
-        [one] toque
-        [many] toques
-       *[other] toques
+        [one] 1 toque
+        [many] { $amount } toques
+       *[other] { $amount } toques
     }
 # This is a unit: 3 trackers, 2 trackers, 1 tracker
 # $amount (Number) - Amount of trackers
@@ -468,6 +592,8 @@ settings-interface-appearance-font-os_font = Fuente SO
 settings-interface-appearance-font-slime_font = Fuente predeterminada
 settings-interface-appearance-font_size = Escala de la fuente base
 settings-interface-appearance-font_size-description = Esto afecta al tamaño de la fuente de toda la interfaz excepto este panel de configuración
+settings-interface-appearance-decorations = Utilizar las decoraciones nativas del sistema
+settings-interface-appearance-decorations-description = Esto no renderizará la barra superior de la interfaz y utilizará la del sistema operativo en su lugar.
 settings-interface-appearance-decorations-label = Usar decoraciones nativos.
 
 ## Notification settings
@@ -483,6 +609,13 @@ settings-general-interface-feedback_sound-volume = Volumen del sonido de feedbac
 settings-general-interface-connected_trackers_warning = Advertencia de trackers conectados
 settings-general-interface-connected_trackers_warning-description = Esta opción mostrará una ventana emergente cada vez que intentes salir de SlimeVR mientras tengas uno o más trackers conectados. Te recuerda que debes apagar los trackers cuando hayas terminado para ahorrar batería.
 settings-general-interface-connected_trackers_warning-label = Aviso de trackers conectados al cerrar
+
+## Behavior settings
+
+settings-interface-behavior = Comportamiento
+settings-general-interface-dev_mode = Modo de desarrollador
+settings-general-interface-dev_mode-description = Este modo puede ser útil si necesitas datos en profundidad o para interactuar con los trackers conectados a un nivel más avanzado
+settings-general-interface-dev_mode-label = Modo de desarrollador
 settings-general-interface-use_tray = Minimizar a la bandeja
 settings-general-interface-use_tray-description = Te permite cerrar la ventana sin cerrar SlimeVR para que pueda seguir usándolo sin que la interfaz te moleste.
 settings-general-interface-use_tray-label = Minimizar en la bandeja del sistema
@@ -495,6 +628,14 @@ settings-general-interface-discord_presence-message =
         [one] Usando 1 tracker
        *[other] Usando { $amount } trackers
     }
+settings-interface-behavior-error_tracking = Recopilación de errores a través de Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>¿Da su consentimiento para la recopilación de datos de error anónimos?</h1>
+    
+    <b>No recopilamos información personal</b> , como su dirección IP o credenciales inalámbricas. ¡SlimeVR valora tu privacidad!
+    
+    Para proporcionar la mejor experiencia de usuario, recopilamos informes de errores anónimos, métricas de rendimiento e información del sistema operativo. Esto nos ayuda a detectar errores y problemas con SlimeVR. Estas métricas se recopilan a través de Sentry.io.
+settings-interface-behavior-error_tracking-label = Enviar errores a los desarrolladores
 
 ## Serial settings
 
@@ -558,6 +699,13 @@ settings-osc-vrchat-description-v1 =
 settings-osc-vrchat-enable = Habilitar
 settings-osc-vrchat-enable-description = Alternar el envío y la recepción de datos
 settings-osc-vrchat-enable-label = Habilitar
+settings-osc-vrchat-oscqueryEnabled = Habilitar OSCQuery
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery detecta automáticamente las instancias en ejecución de VRChat y les envía datos.
+    También puede anunciarse a ellos para recibir datos de HMD y mandos.
+    Para permitir la recepción de datos de HMD y mandos de VRChat, vaya a la configuración de su menú principal
+    en "Seguimiento e IK" y habilite "Permitir el envío de datos OSC de seguimiento de VR de cabeza y muñeca".
+settings-osc-vrchat-oscqueryEnabled-label = Habilitar OSCQuery
 settings-osc-vrchat-network = Puertos de red
 settings-osc-vrchat-network-description-v1 = Establece los puertos para recibir y enviar datos. Se puede dejar sin modificar para VRChat.
 settings-osc-vrchat-network-port_in =
@@ -598,12 +746,7 @@ settings-osc-vmc-network-address-description = Elige la dirección a la que se e
 settings-osc-vmc-network-address-placeholder = Dirección IPV4
 settings-osc-vmc-vrm = Modelo VRM
 settings-osc-vmc-vrm-description = Cargar un modelo VRM para permitir el anclaje de la cabeza y posibilitar una mayor compatibilidad con otras aplicaciones.
-settings-osc-vmc-vrm-model_unloaded = No hay modelo cargado
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Modelo cargado: { $name }
-       *[false] Modelo sin título cargado
-    }
+settings-osc-vmc-vrm-untitled_model = Modelo sin título
 settings-osc-vmc-vrm-file_select = Arrastre y suelte un modelo para utilizarlo, o <u>busquelo</u>
 settings-osc-vmc-anchor_hip = Anclar a la cadera
 settings-osc-vmc-anchor_hip-description = Ancla el tracking a la cadera, útil para VTubing sentado. Si se deshabilita, carga un modelo VRM.
@@ -623,9 +766,27 @@ settings-utils-advanced-reset-server-description = Restaurar la configuración p
 settings-utils-advanced-reset-server-label = Restablecer el tracking,
 settings-utils-advanced-reset-all = Restablecer todas las configuraciónes
 settings-utils-advanced-reset-all-description = Restaurar la configuración predeterminada para el interfaz y el tracking.
+settings-utils-advanced-reset-all-label = Restablecer todo
+settings-utils-advanced-reset_warning =
+    { $type ->
+        [gui]
+            <b>Advertencia:</b> Esto restablecerá la configuración de la interfaz a los valores predeterminados
+            ¿Esta seguro de que quiere hacer esto?
+        [server]
+            <b>Advertencia:</b> Esto restablecerá la configuración de los trackers a los valores predeterminados
+            ¿Esta seguro de que quiere hacer esto?
+       *[all]
+            <b>Advertencia:</b> Esto restablecerá todas las configuraciones a los valores predeterminados
+            ¿Esta seguro de que quiere hacer esto?
+    }
+settings-utils-advanced-reset_warning-reset = Restablecer la configuración
 settings-utils-advanced-reset_warning-cancel = Cancelar
-settings-utils-advanced-open_data = Carpeta de datos
+settings-utils-advanced-open_data-v1 = Carpeta de configuración
+settings-utils-advanced-open_data-description-v1 = Abrirá la carpeta de configuración de SlimeVR en el explorador de archivos, que contiene la configuración
 settings-utils-advanced-open_data-label = Abrir carpeta
+settings-utils-advanced-open_logs = Carpeta de registros
+settings-utils-advanced-open_logs-description = Abra la carpeta de registros de SlimeVR en el explorador de archivos, que contiene los registros de la aplicación
+settings-utils-advanced-open_logs-label = Abrir carpeta
 
 ## Setup/onboarding menu
 
@@ -652,6 +813,7 @@ onboarding-wifi_creds-submit = ¡Enviar!
 onboarding-wifi_creds-ssid =
     .label = Nombre Wi-Fi
     .placeholder = Introduce nombre de Wi-Fi
+onboarding-wifi_creds-ssid-required = Es necesario el nombre del Wi-Fi
 onboarding-wifi_creds-password =
     .label = Contraseña
     .placeholder = Introduce contraseña
@@ -709,6 +871,7 @@ onboarding-connect_tracker-issue-serial = ¡Tengo problemas para conectarme!
 onboarding-connect_tracker-usb = Tracker USB
 onboarding-connect_tracker-connection_status-none = Buscando trackers
 onboarding-connect_tracker-connection_status-serial_init = Conectándose al dispositivo serial
+onboarding-connect_tracker-connection_status-obtaining_mac_address = Obteniendo la dirección MAC del tracker
 onboarding-connect_tracker-connection_status-provisioning = Enviando credenciales Wi-Fi
 onboarding-connect_tracker-connection_status-connecting = Intentando conectarse a una red Wi-Fi
 onboarding-connect_tracker-connection_status-looking_for_server = Buscando servidor
@@ -738,6 +901,7 @@ onboarding-calibration_tutorial-status-waiting = Esperando por ti
 onboarding-calibration_tutorial-status-calibrating = Calibrando
 onboarding-calibration_tutorial-status-success = ¡Bien!
 onboarding-calibration_tutorial-status-error = El tracker se ha movido
+onboarding-calibration_tutorial-skip = Saltar tutorial
 
 ## Tracker assignment tutorial
 
@@ -899,44 +1063,19 @@ onboarding-automatic_mounting-mounting_reset-title = Reinicio de montura
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Ponte en cuclillas en postura de "esquí" con las piernas dobladas, la parte superior del cuerpo inclinada hacia adelante y los brazos doblados.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Presiona el botón "Restablecer montaje" y espera 3 segundos antes de que se restablezcan las orientaciones de montaje de los trackers.
 onboarding-automatic_mounting-preparation-title = Preparación
-onboarding-automatic_mounting-preparation-step-0 = 1. Mantente erguido con los brazos a los lados.
-onboarding-automatic_mounting-preparation-step-1 = 2. Pulse el botón "Reinicio completo" y espere 3 segundos antes de que los trackers se reinicien.
 onboarding-automatic_mounting-put_trackers_on-title = Ponte los trackers
 onboarding-automatic_mounting-put_trackers_on-description = Para calibrar la posiciones de montura, vamos a utilizar los trackers que acabas de asignar. Colocate todos tus trackers, puedes ver cuales son cuales en la figura de la derecha.
 onboarding-automatic_mounting-put_trackers_on-next = Tengo todos mis trackers en posicion
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = ¿Qué método de calibración de proporciones utilizara?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    Las proporciones corporales se utilizaran para conocer las medidas de tu cuerpo. Son necesarias para calcular las posiciones de los trackers. 
-    Cuando las proporciones de tu cuerpo no coincidan con las guardadas, la precisión del tracking será peor y notarás cosas como que patinas o te deslizas, o que tu cuerpo no se ajusta bien a tu avatar.
-    <b>¡Sólo necesitas medir tu cuerpo una vez!</b> A menos que estén mal o tu cuerpo haya cambiado, entonces no necesitas volver a hacerlo.
-onboarding-choose_proportions-auto_proportions = Proporciones automáticas
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = Recomendado
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Adivinará tus proporciones grabando una muestra de tus movimientos y pasándola por un algoritmo.
-    
-    <b>¡Esto requiere tener tu visor (HMD) conectado a SlimeVR y en tu cabeza!</b>
-onboarding-choose_proportions-manual_proportions = Proporciones manuales
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = Para pequeños retoques
-onboarding-choose_proportions-manual_proportions-description = Esto te permitirá ajustar tus proporciones manualmente modificándolas directamente
-onboarding-choose_proportions-export = Exportar proporciones
-onboarding-choose_proportions-import = Importar proporciones
-onboarding-choose_proportions-import-success = Importado
-onboarding-choose_proportions-import-failed = Fallido
-onboarding-choose_proportions-file_type = Archivo de proporciones físicas
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Volver al tutorial de reinicios
 onboarding-manual_proportions-title = Proporciones físicas manuales
-onboarding-manual_proportions-precision = Ajuste por precisión
-onboarding-manual_proportions-auto = Proporciones automáticas
-onboarding-manual_proportions-ratio = Ajustar por grupos de ratio
+onboarding-manual_proportions-fine_tuning_button = Ajuste automático de las proporciones
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Conecte el visor RV para usar el ajuste automatico
+onboarding-manual_proportions-export = Exportar proporciones
+onboarding-manual_proportions-import = Importar proporciones
+onboarding-manual_proportions-file_type = Archivo de proporciones físicas
 
 ## Tracker automatic proportions setup
 
@@ -957,21 +1096,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Tu visor están reportando datos de posición al servidor de SlimeVR (esto generalmente significa tener SteamVR ejecutándose y conectado a SlimeVR usando el driver para SteamVR de SlimeVR).
     Su tracking está funcionando y está representando con precisión sus movimientos (ej. usted ha realizado un reinicio completo y se mueven en la dirección correcta al patear, agacharse, sentarse, etc).
 onboarding-automatic_proportions-requirements-next = He leído los requisitos
-onboarding-automatic_proportions-check_height-title = Comprueba tu altura
-onboarding-automatic_proportions-check_height-description = Utilizamos tu estatura como base de nuestras mediciones utilizando la altura de tu visor (HMD) como aproximación a tu estatura real, ¡pero es mejor que compruebes tú mismo si son correctas!
+onboarding-automatic_proportions-check_height-title-v3 = Medir la altura del visor
+onboarding-automatic_proportions-check_height-description-v2 = La altura se su visor (HMD) deberia ser un poco menos que su altura total, ya que el visor mide la altura hasta sus ojos. Esta medición sera usada como base para las proporciones de su cuerpo.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Por favor, pulse el botón mientras esté <u>derecho</u> para calcular su altura. ¡Tienes 3 segundos después de pulsar el botón!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Empieze a medir mientras este <u>de pie</u> para medir su altura. ¡Tenga cuidado de no levantar las manos mas alto que su visor, ya que podria afectar la medición!
 onboarding-automatic_proportions-check_height-guardian_tip =
     Si usted está usando un visor VR standalone, ¡asegúrese de tener su guardián /
     limite activado para que tu altura sea la correcta!
-onboarding-automatic_proportions-check_height-fetch_height = ¡Estoy de pie!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Desconocida
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = La altura de tu HMD es
+onboarding-automatic_proportions-check_height-hmd_height2 = La altura del visor es:
+onboarding-automatic_proportions-check_height-measure-start = Empezar a medir
+onboarding-automatic_proportions-check_height-measure-stop = Parar de medir
+onboarding-automatic_proportions-check_height-measure-reset = Reintentar medición
+onboarding-automatic_proportions-check_height-next_step = Usar la altura del visor
+onboarding-automatic_proportions-check_floor_height-title = Medir la altura del piso (opcional)
+onboarding-automatic_proportions-check_floor_height-description = En algunos casos, es posible que la altura del suelo no esté configurada correctamente por su visor, lo que hace esta sea más alta de lo que debería ser. Puede medir la "altura" de su piso para corregir la altura del visor.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Comience a medir y coloque un mando contra su piso para medir su altura. Si está seguro de que la altura de su suelo es la correcta, puede omitir este paso.
 # Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = por lo que tu altura real es
-onboarding-automatic_proportions-check_height-next_step = Están bien
+onboarding-automatic_proportions-check_floor_height-floor_height = La altura del suelo es:
+onboarding-automatic_proportions-check_floor_height-full_height = Su altura total estimada es:
+onboarding-automatic_proportions-check_floor_height-measure-start = Empezar a medir
+onboarding-automatic_proportions-check_floor_height-measure-stop = Parar de medir
+onboarding-automatic_proportions-check_floor_height-measure-reset = Reintentar medición
+onboarding-automatic_proportions-check_floor_height-skip_step = Saltar paso y guardar
+onboarding-automatic_proportions-check_floor_height-next_step = Usar altura del suelo y guardar
 onboarding-automatic_proportions-start_recording-title = Prepárate para moverte
 onboarding-automatic_proportions-start_recording-description = Ahora vamos a grabar algunas poses y movimientos específicos. Se le indicarán en la siguiente pantalla. ¡Prepárate para empezar cuando pulse el botón!
 onboarding-automatic_proportions-start_recording-next = Iniciar grabación
@@ -1001,7 +1152,43 @@ onboarding-automatic_proportions-verify_results-redo = Rehacer la grabación
 onboarding-automatic_proportions-verify_results-confirm = Estan correctas
 onboarding-automatic_proportions-done-title = Proporciones medidas y guardadas.
 onboarding-automatic_proportions-done-description = ¡Calibración de las proporciones físicas completada!
+onboarding-automatic_proportions-error_modal-v2 =
+    <b>Advertencia:</b> ¡Hubo un error al estimar las proporciones!
+    Es probable que se trate de un problema de calibración de montura. Asegúrate de que el tracking funciona correctamente antes de volver a intentarlo.
+     <docs>Consulta la documentación</docs> o únete a nuestro <discord>Discord</discord> para obtener ayuda ^_^
 onboarding-automatic_proportions-error_modal-confirm = ¡Entendido!
+onboarding-automatic_proportions-smol_warning =
+    La altura configurada de { $height } es menor que la altura mínima aceptada de { $minHeight }.
+    <b>Vuelva a hacer las mediciones y asegúrese de que sean correctas.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Volver
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = Proporciones escaladas
+onboarding-scaled_proportions-description = Para que los trackers de SlimeVR funcionen, necesitamos saber la longitud de sus huesos. Esto usará una proporción promedio y la escalará en función de su altura.
+onboarding-scaled_proportions-manual_height-title = Configure su altura
+onboarding-scaled_proportions-manual_height-description-v2 = Esta altura se utilizará como base para las proporciones de tu cuerpo.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR no está conectado actualmente a SlimeVR, por lo que las mediciones no se pueden basar con tu visor. <b>¡Proceda bajo su propio riesgo o consulte la documentación!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = Su altura total es
+onboarding-scaled_proportions-manual_height-estimated_height = La altura estimada del visor es:
+onboarding-scaled_proportions-manual_height-next_step = Continuar y guardar
+onboarding-scaled_proportions-manual_height-warning =
+    ¡Actualmente está utilizando la forma manual de configurar proporciones escaladas!
+    <b>Este modo solo se recomienda si no se utiliza un HMD con SlimeVR</b>
+    
+    Para poder utilizar las proporciones escaladas automáticamente, por favor:
+onboarding-scaled_proportions-manual_height-warning-no_hmd = Conecte un visor de RV
+onboarding-scaled_proportions-manual_height-warning-no_controllers = Asegúrese de que sus controladores estén conectados y asignados correctamente a sus manos
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = Restablecer las proporciones del cuerpo
+onboarding-scaled_proportions-reset_proportion-description = Para establecer las proporciones de su cuerpo en función de su altura, ahora debe restablecer todas sus proporciones. Esto borrará las proporciones que haya configurado y proporcionará una configuración de referencia.
+onboarding-scaled_proportions-done-title = Proporciones del cuerpo guardadas
+onboarding-scaled_proportions-done-description = Las proporciones de tu cuerpo ahora deberían configurarse en función de tu altura.
+
+## Stay Aligned setup
+
 
 ## Home
 
@@ -1027,6 +1214,149 @@ status_system-StatusSteamVRDisconnected =
 status_system-StatusTrackerError = El tracker { $trackerName } tiene un error.
 status_system-StatusUnassignedHMD = El casco de RV debe asignarse como tracker de cabeza.
 
+## Firmware tool globals
+
+firmware_tool-next_step = Siguiente paso
+firmware_tool-previous_step = Paso anterior
+firmware_tool-ok = Se ve bien
+firmware_tool-retry = Reintentar
+firmware_tool-loading = Cargando...
+
+## Firmware tool Steps
+
+firmware_tool = Herramienta de firmware DIY
+firmware_tool-description = Le permite configurar y actualizar sus trackers DIY
+firmware_tool-not_available = Vaya, la herramienta de firmware no está disponible en este momento. ¡Vuelve más tarde!
+firmware_tool-not_compatible = La herramienta de firmware no es compatible con esta versión del servidor. ¡Por favor, actualice su servidor!
+firmware_tool-board_step = Seleccione su placa
+firmware_tool-board_step-description = Seleccione una de las placas que se listen a continuación.
+firmware_tool-board_pins_step = Revise los pines
+firmware_tool-board_pins_step-description =
+    Por favor, verifique que los pines seleccionados sean correctos.
+    Si siguió la documentación de SlimeVR, los valores predeterminados deberian ser correctos
+firmware_tool-board_pins_step-enable_led = Habilitar LED
+firmware_tool-board_pins_step-led_pin =
+    .label = Pin del LED
+    .placeholder = Introduzca la dirección del pin del LED
+firmware_tool-board_pins_step-battery_type = Seleccione el tipo de batería
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Batería externa
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Batería interna
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = MCP3021 interno
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = Pin del sensor de batería
+    .placeholder = Introduzca la dirección del pin sensor de la bateria
+firmware_tool-board_pins_step-battery_resistor =
+    .label = Resistencia de la batería (ohmios)
+    .placeholder = Introduzca el valor de la resistencia de la bateria
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = Shield de la Bateria R1 (Ohmios)
+    .placeholder = Introduzca el valor del Shield de la Bateria R1
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = Shield de la Bateria R2 (Ohmios)
+    .placeholder = Introduzca el valor del Shield de la Bateria R2
+firmware_tool-add_imus_step = Declare sus IMUs
+firmware_tool-add_imus_step-description =
+    Por favor, añada las IMUs que su tracker tenga
+    Si siguió la documentación de SlimeVR, los valores predeterminados deben ser correctos
+firmware_tool-add_imus_step-imu_type-label = Tipo de IMU
+firmware_tool-add_imus_step-imu_type-placeholder = Seleccione el tipo de IMU
+firmware_tool-add_imus_step-imu_rotation =
+    .label = Rotación del IMU (grados)
+    .placeholder = Ángulo de rotación del IMU
+firmware_tool-add_imus_step-scl_pin =
+    .label = Pin SCL
+    .placeholder = Dirección del pin SCL
+firmware_tool-add_imus_step-sda_pin =
+    .label = Pin SDA
+    .placeholder = Dirección del pin SDA
+firmware_tool-add_imus_step-int_pin =
+    .label = Pin INT
+    .placeholder = Dirección del pin INT
+firmware_tool-add_imus_step-optional_tracker =
+    .label = Tracker opcional
+firmware_tool-add_imus_step-show_less = Mostrar menos
+firmware_tool-add_imus_step-show_more = Mostrar más
+firmware_tool-add_imus_step-add_more = Añadir más IMUs
+firmware_tool-select_firmware_step = Seleccione la versión del firmware
+firmware_tool-select_firmware_step-description = Elija la versión del firmware que desea utilizar
+firmware_tool-select_firmware_step-show-third-party =
+    .label = Mostrar firmwares de terceros
+firmware_tool-flash_method_step = Método de flasheado
+firmware_tool-flash_method_step-description = Seleccione el método de flasheado que desea utilizar
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Usar el metodo "over the air".  Su tracker usara el Wi-Fi para actualizar el firmware. Solo funciona en trackers ya configurados.
+firmware_tool-flash_method_step-serial =
+    .label = Serial
+    .description = Usar un cable USB para actualizar el tracker.
+firmware_tool-flashbtn_step = Pulse el botón de boot
+firmware_tool-flashbtn_step-description = Antes de pasar al siguiente paso, hay algunas cosas que debe hacer
+firmware_tool-flashbtn_step-board_SLIMEVR = Apague el tracker, retire la carcasa (si la hay), conecte un cable USB a esta computadora y, a continuación, realice uno de los siguientes pasos de acuerdo con la revisión de la placa SlimeVR:
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Encienda el tracker mientras puentea el segundo pad FLASH rectangular desde el borde en la parte superior de la placa y el protector metálico del microcontrolador
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Encienda el tracker mientras puentea el pad circular FLASH en la parte superior de la placa y el protector metálico del microcontrolador
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Encienda el rastreador mientras presiona el botón FLASH en la parte superior de la placa
+firmware_tool-flashbtn_step-board_OTHER =
+    Antes de flashear, probablemente tendrá que poner el tracker en modo bootloader.
+    La mayoría de las veces significa presionar el botón de boot en la placa antes de que comience el proceso de flasheo.
+    Si el tiempo de espera del proceso de flasheo se agota al comienzo, probablemente signifique que el tracker no estaba en modo bootloader
+    Consulte las instrucciones de flasheo de su placa para saber cómo activar el modo bootloader
+firmware_tool-flash_method_ota-devices = Dispositivos OTA detectados:
+firmware_tool-flash_method_ota-no_devices = No hay placas que se puedan actualizar mediante OTA, asegúrese de seleccionar el tipo de placa correcto
+firmware_tool-flash_method_serial-wifi = Credenciales del Wi-Fi:
+firmware_tool-flash_method_serial-devices-label = Dispositivos seriales detectados:
+firmware_tool-flash_method_serial-devices-placeholder = Seleccione un dispositivo serial
+firmware_tool-flash_method_serial-no_devices = No se han detectado dispositivos serial compatibles, asegúrese de que el tracker esté enchufado
+firmware_tool-build_step = Compilando
+firmware_tool-build_step-description = El firmware se está compilando, espere por favor
+firmware_tool-flashing_step = Flasheando
+firmware_tool-flashing_step-description = Sus trackers estan siendo flasheados, por favor siga las instrucciones en pantalla
+firmware_tool-flashing_step-warning-v2 = No desconectes ni apagues el tracker durante el proceso de carga a menos que se le indique, ya que puede hacer que tu placa quede inutilizable
+firmware_tool-flashing_step-flash_more = Flashear más trackers
+firmware_tool-flashing_step-exit = Salir
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = Creando la carpeta de compilación
+firmware_tool-build-DOWNLOADING_FIRMWARE = Descargando el firmware
+firmware_tool-build-EXTRACTING_FIRMWARE = Extrayendo el firmware
+firmware_tool-build-SETTING_UP_DEFINES = Configurando las definiciones
+firmware_tool-build-BUILDING = Compilando el firmware
+firmware_tool-build-SAVING = Guardando la compilación
+firmware_tool-build-DONE = Compilación completa
+firmware_tool-build-ERROR = No se ha podido compilar el firmware
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = Descargando el firmware
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = Por favor, apague y vuelva a encender su rastreador
+firmware_update-status-AUTHENTICATING = Autenticando con el microcontrolador
+firmware_update-status-UPLOADING = Cargando el firmware
+firmware_update-status-SYNCING_WITH_MCU = Sincronizando con el microcontrolador
+firmware_update-status-REBOOTING = Aplicando la actualización
+firmware_update-status-PROVISIONING = Aplicando credenciales Wi-Fi
+firmware_update-status-DONE = ¡Actualización completa!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = No se ha podido encontrar el dispositivo
+firmware_update-status-ERROR_TIMEOUT = Se agotó el tiempo de espera del proceso de actualización
+firmware_update-status-ERROR_DOWNLOAD_FAILED = No se pudo descargar el firmware
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = No se pudo autenticar con el microcontrolador
+firmware_update-status-ERROR_UPLOAD_FAILED = No se pudo cargar el firmware
+firmware_update-status-ERROR_PROVISIONING_FAILED = No se pudieron configurar las credenciales de Wi-Fi
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = El metodo de actualización no es compatible
+firmware_update-status-ERROR_UNKNOWN = Error desconocido
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = Actualización de firmware
+firmware_update-devices = Dispositivos disponibles
+firmware_update-devices-description = Seleccione los trackers que desea actualizar a la última versión del firmware de SlimeVR
+firmware_update-no_devices = ¡Asegúrese de que los trackers que desea actualizar estén encendidos y conectados al Wi-Fi!
+firmware_update-changelog-title = Actualizando a { $version }
+firmware_update-looking_for_devices = Buscando dispositivos para actualizar...
+firmware_update-retry = Reintentar
+firmware_update-update = Actualizar rastreadores seleccionados
+firmware_update-exit = Salir
+
 ## Tray Menu
 
 tray_menu-show = Mostrar
@@ -1054,3 +1384,13 @@ unknown_device-modal-description =
     ¿Quieres conectarlo a SlimeVR?
 unknown_device-modal-confirm = ¡Claro!
 unknown_device-modal-forget = Ignóralo
+
+## Error collection consent modal
+
+error_collection_modal-title = ¿Podemos recopilar errores?
+error_collection_modal-description_v2 =
+    { settings-interface-behavior-error_tracking-description_v2 }
+    
+    Puede cambiar esta configuración más adelante en la sección Comportamiento de la página de configuración.
+error_collection_modal-confirm = Acepto
+error_collection_modal-cancel = No quiero

gui/public/i18n/fr/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Connexion au serveur
 websocket-connection_lost = Connexion avec le serveur perdue. Reconnexion...
+websocket-connection_lost-desc = Il semble que le serveur SlimeVR ait planté. Vérifiez les logs et redémarrez le programme.
+websocket-timedout = Impossible de se connecter au serveur
+websocket-timedout-desc = Il semble que le serveur SlimeVR ait planté ou que le délai d'attente ait expiré. Vérifiez les logs et redémarrez le programme.
+websocket-error-close = Quitter SlimeVR
+websocket-error-logs = Ouvrir le dossier des logs
 
 ## Update notification
 
@@ -23,8 +28,8 @@ tips-find_tracker = Impossible de différencier vos capteurs ? Secouez-en un pou
 tips-do_not_move_heels = Assurez-vous de ne pas bouger vos pieds pendant l'enregistrement !
 tips-file_select = Glissez et déposez des fichiers à utiliser, ou <u>parcourir</u>.
 tips-tap_setup = Vous pouvez tapoter lentement votre capteur 2 fois pour le choisir au lieu de le sélectionner depuis le menu.
-tips-turn_on_tracker = Vous utilisez des capteurs officiels SlimeVR ? N’oubliez pas <b><em>d’allumer votre capteur</em></b> après l’avoir connecté au PC !
-tips-failed_webgl = Échec de l’initialisation de WebGL.
+tips-turn_on_tracker = Vous utilisez des capteurs officiels SlimeVR ? N'oubliez pas <b><em>d'allumer votre capteur</em></b> après l'avoir connecté au PC !
+tips-failed_webgl = Échec de l'initialisation de WebGL.
 
 ## Body parts
 
@@ -49,43 +54,194 @@ body_part-LEFT_HAND = Main gauche
 body_part-LEFT_UPPER_LEG = Cuisse gauche
 body_part-LEFT_LOWER_LEG = Cheville gauche
 body_part-LEFT_FOOT = Pied gauche
+body_part-LEFT_THUMB_METACARPAL = Métacarpien du pouce gauche
+body_part-LEFT_THUMB_PROXIMAL = Pouce gauche proximal
+body_part-LEFT_THUMB_DISTAL = Pouce gauche distal
+body_part-LEFT_INDEX_PROXIMAL = Index gauche proximal
+body_part-LEFT_INDEX_INTERMEDIATE = Index gauche intermédiaire
+body_part-LEFT_INDEX_DISTAL = Index gauche distal
+body_part-LEFT_MIDDLE_PROXIMAL = Majeur gauche proximal
+body_part-LEFT_MIDDLE_INTERMEDIATE = Majeur gauche intermédiaire
+body_part-LEFT_MIDDLE_DISTAL = Majeur gauche distal
+body_part-LEFT_RING_PROXIMAL = Annulaire gauche proximal
+body_part-LEFT_RING_INTERMEDIATE = Annulaire gauche intermédiaire
+body_part-LEFT_RING_DISTAL = Annulaire gauche distal
+body_part-LEFT_LITTLE_PROXIMAL = Auriculaire gauche proximal
+body_part-LEFT_LITTLE_INTERMEDIATE = Auriculaire gauche intermédiaire
+body_part-LEFT_LITTLE_DISTAL = Auriculaire gauche distal
+body_part-RIGHT_THUMB_METACARPAL = Métacarpien du pouce droit
+body_part-RIGHT_THUMB_PROXIMAL = Pouce droit proximal
+body_part-RIGHT_THUMB_DISTAL = Pouce droit distal
+body_part-RIGHT_INDEX_PROXIMAL = Index droit proximal
+body_part-RIGHT_INDEX_INTERMEDIATE = Index droit intermédiaire
+body_part-RIGHT_INDEX_DISTAL = Index droit distal
+body_part-RIGHT_MIDDLE_PROXIMAL = Majeur droit proximal
+body_part-RIGHT_MIDDLE_INTERMEDIATE = Majeur droit intermédiaire
+body_part-RIGHT_MIDDLE_DISTAL = Majeur droit distal
+body_part-RIGHT_RING_PROXIMAL = Annulaire droit proximal
+body_part-RIGHT_RING_INTERMEDIATE = Annulaire droit intermédiaire
+body_part-RIGHT_RING_DISTAL = Annulaire droit distal
+body_part-RIGHT_LITTLE_PROXIMAL = Auriculaire droit proximal
+body_part-RIGHT_LITTLE_INTERMEDIATE = Auriculaire droit intermédiaire
+body_part-RIGHT_LITTLE_DISTAL = Auriculaire droit distal
+
+## BoardType
+
+board_type-UNKNOWN = Inconnu
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Carte personnalisée
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU Glove
 
 ## Proportions
 
 skeleton_bone-NONE = Aucun
 skeleton_bone-HEAD = Décalage de la tête
+skeleton_bone-HEAD-desc =
+    Ceci est la distance entre votre casque et le milieu de votre tête.
+    Pour l’ajuster, secouez votre tête de gauche à droite comme si vous disiez non et modifiez-la
+    jusqu’à ce que vos capteurs bougent le moins possible.
 skeleton_bone-NECK = Longueur du cou
+skeleton_bone-NECK-desc =
+    Ceci est la distance entre le milieu de votre tête et la base de votre cou.
+    Pour l’ajuster, hochez votre tête de haut en bas ou inclinez votre tête de gauche à droite et modifiez-la 
+    jusqu’à ce que vos capteurs bougent le moins possible.
 skeleton_bone-torso_group = Longueur du torse
+skeleton_bone-torso_group-desc =
+    Ceci est la distance entre la base de votre cou et vos hanches.
+    Pour l’ajuster, tenez-vous debout et modifiez-la jusqu’à ce que
+    vos hanches virtuelles soient alignées avec vos vraies hanches.
 skeleton_bone-UPPER_CHEST = Longueur de la poitrine supérieure
+skeleton_bone-UPPER_CHEST-desc =
+    Ceci la distance entre la base de votre cou et le milieu de votre poitrine.
+    Pour l’ajuster, ajustez correctement la longueur de votre torse et modifiez-la dans différentes positions
+    (assis, penché, allongé, etc.) jusqu’à ce que votre colonne vertébrale virtuelle corresponde à votre colonne vertébrale réelle.
 skeleton_bone-CHEST_OFFSET = Décalage de la poitrine
+skeleton_bone-CHEST_OFFSET-desc =
+    Ceci peut être ajusté pour déplacer votre capteur virtuel de poitrine vers le haut ou vers le bas afin d’aider
+    avec la calibration dans certains jeux ou applications qui peuvent s’attendre à ce qu’il soit plus ou moins haut.
 skeleton_bone-CHEST = Longueur de la poitrine
+skeleton_bone-CHEST-desc =
+    Ceci est la distance entre le milieu de votre poitrine et le milieu de votre colonne vertébrale.
+    Pour l’ajuster, ajustez correctement la longueur de votre torse et modifiez-la dans différentes positions
+    (assis, penché, allongé, etc.) jusqu’à ce que votre colonne vertébrale virtuelle corresponde à votre colonne vertébrale réelle.
 skeleton_bone-WAIST = Longueur de la taille
+skeleton_bone-WAIST-desc =
+    Ceci est la distance entre le milieu de votre colonne vertébrale et votre nombril.
+    Pour l’ajuster, ajustez correctement la longueur de votre torse et modifiez-la dans différentes positions
+    (assis, penché, allongé, etc.) jusqu’à ce que votre colonne vertébrale virtuelle corresponde à votre colonne vertébrale réelle.
 skeleton_bone-HIP = Longueur des hanches
+skeleton_bone-HIP-desc =
+    Ceci est la distance entre votre nombril et vos hanches
+    Pour l’ajuster, ajustez correctement la longueur de votre torse et modifiez-la dans différentes positions
+    (assis, penché, allongé, etc.) jusqu’à ce que votre colonne vertébrale virtuelle corresponde à votre colonne vertébrale réelle.
 skeleton_bone-HIP_OFFSET = Décalage de la hanche
+skeleton_bone-HIP_OFFSET-desc =
+    Ceci peut être ajusté pour déplacer votre capteur virtuel de hanche vers le haut ou vers le bas afin d’aider
+    avec la calibration dans certains jeux ou applications qui pourraient s’attendre à ce qu’il soit sur votre taille.
 skeleton_bone-HIPS_WIDTH = Largeur des hanches
+skeleton_bone-HIPS_WIDTH-desc =
+    Ceci est la distance entre vos deux jambes.
+    Pour l’ajuster, effectuez une réinitialisation complète avec vos jambes droites et modifiez-la jusqu’à ce que
+    Vos jambes virtuelles soient au même niveau horizontalement que vos vraies jambes.
 skeleton_bone-leg_group = Longueur des jambes
+skeleton_bone-leg_group-desc =
+    Ceci est la distance entre vos hanches et vos pieds.
+    Pour l’ajuster, ajustez correctement la longueur du torse et modifiez-la
+    jusqu’à ce que vos pieds virtuels soient au même niveau que vos pieds réels.
 skeleton_bone-UPPER_LEG = Longueur des jambes supérieures
+skeleton_bone-UPPER_LEG-desc =
+    Ceci est la distance entre vos hanches et vos genoux.
+    Pour l’ajuster, ajustez correctement la longueur des jambes et modifiez-la
+    jusqu’à ce que vos genoux virtuels soient au même niveau que vos genoux réels.
 skeleton_bone-LOWER_LEG = Longueur des jambes inférieures
+skeleton_bone-LOWER_LEG-desc =
+    Ceci est la distance entre vos genoux et vos chevilles.
+    Pour l’ajuster, ajustez correctement la longueur des jambes et modifiez-la
+    jusqu’à ce que vos genoux virtuels soient au même niveau que vos genoux réels.
 skeleton_bone-FOOT_LENGTH = Longueur des pieds
+skeleton_bone-FOOT_LENGTH-desc =
+    Ceci est la distance entre vos chevilles et vos orteils.
+    Pour l’ajuster, allez sur la pointe des pieds et modifiez-la jusqu’à ce que vos pieds virtuels restent en place.
 skeleton_bone-FOOT_SHIFT = Décalage des pieds
+skeleton_bone-FOOT_SHIFT-desc =
+    Ceci est la distance horizontale entre votre genou et votre cheville.
+    Il tient compte du fait que le bas de vos jambes recule lorsque vous vous tenez droit.
+    Pour l’ajuster, réglez la longueur des pieds à 0, effectuez une réinitialisation complète et modifiez-la jusqu’à ce que vos
+    pieds virtuels s’alignent avec le milieu de vos chevilles.
 skeleton_bone-SKELETON_OFFSET = Décalage du squelette
+skeleton_bone-SKELETON_OFFSET-desc =
+    Ceci peut être ajusté pour décaler tous vos capteurs vers l’avant ou vers l’arrière.
+    Cela peut être utilisé pour aider à la calibration dans certains jeux ou applications
+    qui pourraient s’attendre à ce que vos capteurs soient plus vers l'avant.
 skeleton_bone-SHOULDERS_DISTANCE = Distance des épaules
+skeleton_bone-SHOULDERS_DISTANCE-desc =
+    Ceci est la distance verticale entre la base de votre cou et vos épaules.
+    Pour l’ajuster, réglez la longueur des bras à 0 et modifiez-la jusqu’à ce que vos capteurs de coude virtuels
+    soient alignés verticalement avec vos vraies épaules.
 skeleton_bone-SHOULDERS_WIDTH = Largeur des épaules
+skeleton_bone-SHOULDERS_WIDTH-desc =
+    Ceci est la distance horizontale entre la base de votre cou et vos épaules.
+    Pour l’ajuster, réglez la longueur des bras à 0 et modifiez-la jusqu’à ce que vos capteurs de coude virtuels
+    soient alignés horizontalement avec vos vraies épaules.
 skeleton_bone-arm_group = Longueur des bras
+skeleton_bone-arm_group-desc =
+    Ceci est la distance entre vos épaules et vos poignets.
+    Pour l’ajuster, ajustez correctement la distance des épaules, réglez la distance Y des mains
+    à 0 et modifiez-la jusqu’à ce que vos capteurs de main soient alignés avec vos poignets.
 skeleton_bone-UPPER_ARM = Longueur des bras supérieurs
+skeleton_bone-UPPER_ARM-desc =
+    Ceci est la distance entre vos épaules et vos coudes.
+    Pour l’ajuster, ajustez correctement la longueur des bras et modifiez-la jusqu’à ce que
+    vos capteurs de coude soient alignés avec vos vrais coudes.
 skeleton_bone-LOWER_ARM = Longueur des avant-bras
+skeleton_bone-LOWER_ARM-desc =
+    Ceci est la distance entre vos coudes et vos poignets.
+    Pour l’ajuster, ajustez correctement la longueur des bras et modifiez-la jusqu’à ce que
+    vos capteurs de coude soient alignés avec vos vrais coudes.
 skeleton_bone-HAND_Y = Distance Y des mains
+skeleton_bone-HAND_Y-desc =
+    Ceci est la distance verticale entre vos poignets et le milieu de vos main.
+    Pour l’ajuster pour la capture de mouvement, ajustez correctement la longueur des bras et modifiez-la jusqu’à ce que votre
+    capteurs de main soient alignés verticalement avec le milieu de vos mains.
+    Pour l’ajuster pour le suivi des coudes à partir de vos manettes, réglez la longueur des bras à 0 et
+    modifiez-la jusqu’à ce que vos capteurs de coude soient alignés verticalement avec vos poignets.
 skeleton_bone-HAND_Z = Distance Z des mains
+skeleton_bone-HAND_Z-desc =
+    Ceci est la distance horizontale entre vos poignets et le milieu de votre main.
+    Pour l’ajuster pour la capture de mouvement, réglez-la à 0.
+    Pour l’ajuster pour le suivi du coude à partir de vos manettes, réglez la longueur des bras à 0 et
+    modifiez-la jusqu’à ce que vos capteurs de coude soient alignés horizontalement avec vos poignets.
 skeleton_bone-ELBOW_OFFSET = Décalage des coudes
+skeleton_bone-ELBOW_OFFSET-desc =
+    Ceci peut être ajusté pour déplacer vos capteurs de coude virtuels vers le haut ou vers le bas afin d’aider
+    dans le cas où VRChat lie accidentellement un capteur de coude à votre poitrine poitrine.
 
 ## Tracker reset buttons
 
 reset-reset_all = Réinitialiser toutes les proportions
-reset-reset_all_warning =
-    <b>Avertissement:</b> Cela réinitialisera vos proportions pour qu’elles soient basées sur votre taille.
+reset-reset_all_warning-v2 =
+    <b>Avertissement:</b> vos proportions seront réinitialisées aux valeurs par défaut ajustées à votre hauteur configurée.
     Êtes-vous sûr de vouloir faire cela ?
 reset-reset_all_warning-reset = Réinitialiser les proportions
 reset-reset_all_warning-cancel = Annuler
+reset-reset_all_warning_default-v2 =
+    <b>Avertissement:</b> votre hauteur n'a pas été configurée, vos proportions seront réinitialisées aux valeurs par défaut avec la hauteur par défaut.
+    Êtes-vous sûr de vouloir faire cela ?
 reset-full = Réinitialisation complète
 reset-mounting = Réinitialiser l'alignement
 reset-yaw = Réinitialisation horizontale
@@ -113,6 +269,7 @@ navbar-settings = Réglages
 
 bvh-start_recording = Enregistrer BVH
 bvh-recording = Enregistrement...
+bvh-save_title = Sauvegarder l’enregistrement BVH
 
 ## Tracking pause
 
@@ -153,6 +310,7 @@ widget-imu_visualizer-rotation_raw = Brute
 widget-imu_visualizer-rotation_preview = Aperçu
 widget-imu_visualizer-acceleration = Accélération
 widget-imu_visualizer-position = Position
+widget-imu_visualizer-stay_aligned = Garder Aligné
 
 ## Widget: Skeleton Visualizer
 
@@ -180,6 +338,7 @@ tracker-table-column-temperature = Temp. °C
 tracker-table-column-linear-acceleration = Accél. X/Y/Z
 tracker-table-column-rotation = Rotation X/Y/Z
 tracker-table-column-position = Position X/Y/Z
+tracker-table-column-stay_aligned = Garder Aligné
 tracker-table-column-url = URL
 
 ## Tracker rotation
@@ -201,9 +360,10 @@ tracker-infos-manufacturer = Fabricant
 tracker-infos-display_name = Nom
 tracker-infos-custom_name = Nom personnalisé
 tracker-infos-url = URL du capteur
-tracker-infos-version = Version du firmware
+tracker-infos-version = Version du micrologiciel
 tracker-infos-hardware_rev = Révision du hardware
 tracker-infos-hardware_identifier = ID Matériel
+tracker-infos-data_support = Prise en charge de données
 tracker-infos-imu = Capteur IMU
 tracker-infos-board_type = Carte principale
 tracker-infos-network_version = Version du protocole
@@ -231,9 +391,9 @@ tracker-settings-drift_compensation_section-edit = Permettre la compensation de
 tracker-settings-use_mag = Autoriser l'utilisation du magnétomètre sur ce capteur
 # Multiline!
 tracker-settings-use_mag-description =
-    Est-ce que ce capteur utiliser son magnétomètre pour réduire la dérive lorsque l’utilisation du magnétomètre est autorisée ? <b>N’éteignez pas votre capteur pendant que vous changez cette option !</b>
+    Est-ce que ce capteur devrait utiliser son magnétomètre pour réduire la dérive lorsque l'utilisation du magnétomètre est autorisée ? <b>N'éteignez pas votre capteur pendant que vous changez cette option !</b>
     
-    Vous devez d’abord autoriser l’utilisation du magnétomètre dans les paramètres. <magSetting>Cliquez ici pour y accéder</magSetting>.
+    Vous devez d'abord autoriser l'utilisation du magnétomètre dans les paramètres. <magSetting>Cliquez ici pour y accéder</magSetting>.
 tracker-settings-use_mag-label = Autoriser le magnétomètre
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
@@ -242,8 +402,15 @@ tracker-settings-name_section-description = Donnez-lui un joli surnom :3
 tracker-settings-name_section-placeholder = Patte gauche d'Erimel
 tracker-settings-name_section-label = Nom personalisé
 tracker-settings-forget = Oublier capteur
-tracker-settings-forget-description = Supprime le capteur du serveur SlimeVR et l’empêche de s’y connecter jusqu’à ce que le serveur soit redémarré. La configuration du capteur ne sera pas perdue.
+tracker-settings-forget-description = Supprime le capteur du serveur SlimeVR et l'empêche de s'y connecter jusqu'à ce que le serveur soit redémarré. La configuration du capteur ne sera pas perdue.
 tracker-settings-forget-label = Oublier capteur
+tracker-settings-update-unavailable = Ne peut pas être mis à jour (DIY)
+tracker-settings-update-low-battery = Mise à jour impossible. Batterie inférieure à 50 %
+tracker-settings-update-up_to_date = À jour
+tracker-settings-update-blocked = Mise à jour non disponible. Aucune autre version disponible
+tracker-settings-update-available = { $versionName } est maintenant disponible
+tracker-settings-update = Mettre à jour maintenant
+tracker-settings-update-title = Version du micrologiciel
 
 ## Tracker part card info
 
@@ -310,6 +477,7 @@ mounting_selection_menu-close = Fermer
 settings-sidebar-title = Réglages
 settings-sidebar-general = Général
 settings-sidebar-tracker_mechanics = Paramètres des capteurs
+settings-sidebar-stay_aligned = Garder Aligné
 settings-sidebar-fk_settings = Paramètres de la capture
 settings-sidebar-gesture_control = Contrôle gestuel
 settings-sidebar-interface = Interface
@@ -319,6 +487,9 @@ settings-sidebar-utils = Utilitaires
 settings-sidebar-serial = Console série
 settings-sidebar-appearance = Apparence
 settings-sidebar-notifications = Notifications
+settings-sidebar-behavior = Comportement
+settings-sidebar-firmware-tool = Outil de micrologiciel DIY
+settings-sidebar-vrc_warnings = Avertissements de configuration VRChat
 settings-sidebar-advanced = Avancé
 
 ## SteamVR settings
@@ -343,7 +514,7 @@ settings-general-steamvr-trackers-right_elbow = Coude droit
 settings-general-steamvr-trackers-left_hand = Main gauche
 settings-general-steamvr-trackers-right_hand = Main droite
 settings-general-steamvr-trackers-tracker_toggling = Assignation automatique des capteurs
-settings-general-steamvr-trackers-tracker_toggling-description = Gère automatiquement l’activation ou la désactivation des capteurs SteamVR en fonction de vos capteurs actuellement affectés
+settings-general-steamvr-trackers-tracker_toggling-description = Gère automatiquement l'activation ou la désactivation des capteurs SteamVR en fonction de vos capteurs actuellement affectés
 settings-general-steamvr-trackers-tracker_toggling-label = Assignation automatique des capteurs
 settings-general-steamvr-trackers-hands-warning =
     <b>Attention :</b> les capteurs de mains remplaceront vos manettes.
@@ -381,11 +552,11 @@ settings-general-tracker_mechanics-drift_compensation-prediction-description =
     Activez cette option si vos capteurs tournent continuellement sur eux-mêmes horizontalement.
 settings-general-tracker_mechanics-drift_compensation-prediction-label = Prédiction de la compensation de la dérive
 settings-general-tracker_mechanics-drift_compensation_warning =
-    <b>Avertissement:</b> n’utilisez la compensation de la dérive que si vous devez
+    <b>Avertissement:</b> n'utilisez la compensation de la dérive que si vous devez
     réinitialiser très souvent (toutes les ~5-10 minutes).
     
     Voici quelques IMUs sujets à des réinitialisations fréquentes :
-    Joy-Cons, owoTrack et MPUs (sans firmware récent).
+    Joy-Cons, owoTrack et MPUs (sans micrologiciel récent).
 settings-general-tracker_mechanics-drift_compensation_warning-cancel = Annuler
 settings-general-tracker_mechanics-drift_compensation_warning-done = Je comprends
 settings-general-tracker_mechanics-drift_compensation-amount-label = Force de la compensation
@@ -397,9 +568,28 @@ settings-general-tracker_mechanics-save_mounting_reset-description =
 settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Enregistrer la réinitialisation de l'alignement
 settings-general-tracker_mechanics-use_mag_on_all_trackers = Utiliser le magnétomètre sur tous les capteurs IMU qui le prennent en charge
 settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
-    Utilise le magnétomètre sur tous les capteurs dotés d’un firmware compatible, réduisant ainsi la dérive dans des environnements magnétiques stables.
+    Utilise le magnétomètre sur tous les capteurs dotés d'un micrologiciel compatible, réduisant ainsi la dérive dans des environnements magnétiques stables.
     Peut être désactivé par capteur dans les paramètres du capteur. <b>Ne fermez aucun des capteurs en changeant cette option !</b>
 settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Utiliser le magnétomètre sur les capteurs
+settings-stay_aligned = Garder Aligné
+settings-stay_aligned-description = Garder Aligné réduit la dérive en ajustant progressivement vos capteurs pour qu’ils correspondent à vos postures détendues.
+settings-stay_aligned-setup-label = Configurer Garder Aligné
+settings-stay_aligned-setup-description = Vous devez terminer « Configurer Garder Aligné » pour activer Garder Aligné.
+settings-stay_aligned-warnings-drift_compensation = ⚠ Veuillez désactiver la compensation de la dérive ! La compensation de la dérive entrera en conflit avec Garder Aligné.
+settings-stay_aligned-enabled-label = Ajuster les capteurs
+settings-stay_aligned-hide_yaw_correction-label = Masquer l'ajustement (pour comparer sans Garder Aligné)
+settings-stay_aligned-general-label = Général
+settings-stay_aligned-relaxed_poses-label = Postures détendues
+settings-stay_aligned-relaxed_poses-description = Garder Aligné utilise vos postures détendues pour garder vos capteurs alignés. Utilisez « Configurer Garder Aligné » pour mettre à jour ces poses.
+settings-stay_aligned-relaxed_poses-standing = Ajuster les capteurs en position debout
+settings-stay_aligned-relaxed_poses-sitting = Ajuster les capteurs en position assise sur une chaise
+settings-stay_aligned-relaxed_poses-flat = Ajuster les capteurs en position assise sur le sol ou allongée sur le dos
+settings-stay_aligned-relaxed_poses-save_pose = Enregistrer la posture
+settings-stay_aligned-relaxed_poses-reset_pose = Réinitialiser la posture
+settings-stay_aligned-relaxed_poses-close = Fermer
+settings-stay_aligned-debug-label = Débogage
+settings-stay_aligned-debug-description = Veuillez inclure vos paramètres lorsque vous signalez des problèmes concernant Garder Aligné.
+settings-stay_aligned-debug-copy-label = Copier les paramètres dans le presse-papiers
 
 ## FK/Tracking settings
 
@@ -423,21 +613,26 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = La correction de
 settings-general-fk_settings-leg_fk = Capture des jambes
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Activer la réinitialisation de l'alignement des pieds en allant sur la pointe des pieds.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Réinitialisation de l'alignement des pieds
+settings-general-fk_settings-enforce_joint_constraints = Limites squelettiques
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Appliquer les contraintes
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Empêche les articulations de tourner au-delà de leur limite
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Corriger avec les contraintes
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Corriger les rotations des articulations lorsqu'elles dépassent leur limite
 settings-general-fk_settings-arm_fk = Capture des bras
 settings-general-fk_settings-arm_fk-description = Changez la façon dont les bras sont captés.
 settings-general-fk_settings-arm_fk-force_arms = Forcer les bras en provenance du casque VR
 settings-general-fk_settings-reset_settings = Paramètres de réinitialisations
-settings-general-fk_settings-reset_settings-reset_hmd_pitch-description = Réinitialisez la rotation verticale du casque VR lors d’une réinitialisation complète. Utile pour porter un casque VR sur le front pour le VTubing ou l'animation. Ne pas activer pour la VR.
+settings-general-fk_settings-reset_settings-reset_hmd_pitch-description = Réinitialise la rotation verticale du casque VR lors d'une réinitialisation complète. Utile pour porter un casque VR sur le front pour du VTubing ou de l'animation. Ne pas activer pour la VR.
 settings-general-fk_settings-reset_settings-reset_hmd_pitch = Réinitialiser la rotation verticale du casque VR
 settings-general-fk_settings-arm_fk-reset_mode-description = Changer la pose des bras attendue pour la réinitialisation de l'alignement.
 settings-general-fk_settings-arm_fk-back = En arrière
-settings-general-fk_settings-arm_fk-back-description = Le mode par défaut, avec les bras vers l’arrière et les avant-bras vers l’avant.
+settings-general-fk_settings-arm_fk-back-description = Le mode par défaut, avec les bras vers l'arrière et les avant-bras vers l'avant.
 settings-general-fk_settings-arm_fk-tpose_up = T-pose (vers le haut)
-settings-general-fk_settings-arm_fk-tpose_up-description = S’attend à ce que vos bras soient  vers le bas sur les côtés pendant la réinitialisation complète et à 90 degrés vers l'extérieur pendant la réinitialisation de l'alignement.
+settings-general-fk_settings-arm_fk-tpose_up-description = S'attend à ce que vos bras soient  vers le bas sur les côtés pendant la réinitialisation complète et à 90 degrés vers l'extérieur pendant la réinitialisation de l'alignement.
 settings-general-fk_settings-arm_fk-tpose_down = T-pose (vers le bas)
-settings-general-fk_settings-arm_fk-tpose_down-description = S’attend à ce que vos bras soient à 90 degrés vers l'extérieur pendant la réinitialisation complète et vers le bas sur les côtés pendant la réinitialisation de l'alignement.
+settings-general-fk_settings-arm_fk-tpose_down-description = S'attend à ce que vos bras soient à 90 degrés vers l'extérieur pendant la réinitialisation complète et vers le bas sur les côtés pendant la réinitialisation de l'alignement.
 settings-general-fk_settings-arm_fk-forward = En avant
-settings-general-fk_settings-arm_fk-forward-description = S’attend à ce que vos bras soient levés 90 degrés vers l’avant. Utile pour le VTubing.
+settings-general-fk_settings-arm_fk-forward-description = S'attend à ce que vos bras soient levés 90 degrés vers l'avant. Utile pour le VTubing.
 settings-general-fk_settings-skeleton_settings-toggles = Bascules du squelette
 settings-general-fk_settings-skeleton_settings-description = Activez ou désactivez des paramètres avancés de capture.
 settings-general-fk_settings-skeleton_settings-extended_spine_model = Modèle de colonne vertébrale avancé
@@ -454,9 +649,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Inter
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Interpoler les rotations horizontales et de torsion des genoux avec celles des chevilles
 settings-general-fk_settings-self_localization-title = Mode Mocap
 settings-general-fk_settings-self_localization-description = Le mode Mocap permet au squelette de suivre grossièrement sa propre position sans casque ou autres capteurs. Ce mode nécessite des capteurs de pieds et de tête afin de fonctionner et est encore expérimental.
-settings-general-fk_settings-vive_emulation-title = Émulation Vive
-settings-general-fk_settings-vive_emulation-description = Simule les problèmes des capteurs de taille que capteurs Vive ont. Cette optionest une blague et rend la capture des mouvements pire.
-settings-general-fk_settings-vive_emulation-label = Activer l'émulation Vive
 
 ## Gesture control settings (tracker tapping)
 
@@ -498,7 +690,7 @@ settings-general-interface-dev_mode-description = Ce mode peut être utile pour
 settings-general-interface-dev_mode-label = Mode développeur
 settings-general-interface-theme = Thème
 settings-general-interface-show-navbar-onboarding = Afficher « { navbar-onboarding } » dans la barre de navigation
-settings-general-interface-show-navbar-onboarding-description = Cela change si le bouton « { navbar-onboarding } » s’affiche dans la barre de navigation.
+settings-general-interface-show-navbar-onboarding-description = Cela décide si le bouton « { navbar-onboarding } » s'affiche dans la barre de navigation.
 settings-general-interface-show-navbar-onboarding-label = Afficher « { navbar-onboarding } »
 settings-general-interface-lang = Langue
 settings-general-interface-lang-description = Choisir la langue par défaut.
@@ -507,7 +699,7 @@ settings-general-interface-lang-placeholder = Langue
 settings-interface-appearance-font = Police de l'interface
 settings-interface-appearance-font-description = Cela change la police d'écriture utilisée par l'interface.
 settings-interface-appearance-font-placeholder = Police par défaut
-settings-interface-appearance-font-os_font = Police du système d’exploitation
+settings-interface-appearance-font-os_font = Police du système d'exploitation
 settings-interface-appearance-font-slime_font = Police par défaut
 settings-interface-appearance-font_size = Agrandissement du texte
 settings-interface-appearance-font_size-description = Cela affecte la taille du texte de toute l'interface, sauf de ce menu.
@@ -526,10 +718,17 @@ settings-general-interface-feedback_sound-description = Cette option va jouer un
 settings-general-interface-feedback_sound-label = Son de retour
 settings-general-interface-feedback_sound-volume = Volume du son de retour
 settings-general-interface-connected_trackers_warning = Avertissement de capteurs connectés
-settings-general-interface-connected_trackers_warning-description = Cette option affichera une fenêtre contextuelle chaque fois que vous essaierez de quitter SlimeVR tout en ayant un ou plusieurs capteurs connectés. Il vous rappelle d’éteindre vos capteurs lorsque vous avez terminé pour préserver la durée de vie de la batterie.
+settings-general-interface-connected_trackers_warning-description = Cette option affichera une fenêtre contextuelle à chaque fois que vous essaierez de quitter SlimeVR en ayant un ou plusieurs capteurs connectés. Il vous rappelle d'éteindre vos capteurs lorsque vous avez terminé pour préserver la durée de vie de la batterie.
 settings-general-interface-connected_trackers_warning-label = Avertissement de capteurs connectés en quittant
+
+## Behavior settings
+
+settings-interface-behavior = Comportement
+settings-general-interface-dev_mode = Mode développeur
+settings-general-interface-dev_mode-description = Ce mode peut être utile pour avoir des données approfondies ou pour interagir avec des capteurs connectés à un niveau plus avancé.
+settings-general-interface-dev_mode-label = Mode développeur
 settings-general-interface-use_tray = Minimiser dans la zone de notifications
-settings-general-interface-use_tray-description = Vous permet de fermer la fenêtre sans fermer le serveur SlimeVR afin que vous puissiez continuer à l’utiliser sans l’interface graphique.
+settings-general-interface-use_tray-description = Vous permet de fermer la fenêtre sans fermer le serveur SlimeVR afin que vous puissiez continuer à l'utiliser sans l'interface graphique.
 settings-general-interface-use_tray-label = Minimiser dans la zone de notifications
 settings-general-interface-discord_presence = Partager l'activité sur Discord
 settings-general-interface-discord_presence-description = Indique à votre client Discord que vous utilisez SlimeVR avec le nombre de capteurs IMU que vous utilisez.
@@ -540,6 +739,17 @@ settings-general-interface-discord_presence-message =
         [one] Utilise { $amount } capteur
        *[other] Utilise { $amount } capteurs
     }
+settings-interface-behavior-error_tracking = Collecte des erreurs via Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Consentez-vous à la collecte de données d'erreur anonymisée ?</h1>
+    
+    <b>Nous ne collectons pas d'informations personnelles</b> telles que votre adresse IP ou vos identifiants Wi-Fi. SlimeVR accorde une grande importance à votre vie privée !
+    
+    Pour offrir la meilleure expérience utilisateur possible, nous collectons des rapports d'erreurs anonymisés, des mesures de performance et des informations sur le système d'exploitation. Cela nous aide à détecter les bugs et les problèmes liés à SlimeVR. Ces données sont collectées via Sentry.io.
+settings-interface-behavior-error_tracking-label = Envoyer les erreurs aux développeurs
+settings-interface-behavior-bvh_directory = Répertoire pour sauvegarder les enregistrements BVH
+settings-interface-behavior-bvh_directory-description = Choisissez un répertoire où sauvegarder vos enregistrements BVH au lieu d’avoir à choisir où les sauvegarder à chaque fois.
+settings-interface-behavior-bvh_directory-label = Répertoire où sauvegarder les enregistrements BVH
 
 ## Serial settings
 
@@ -595,14 +805,19 @@ settings-osc-router-network-address-placeholder = Adresse IPv4
 settings-osc-vrchat = Capteurs OSC VRChat
 # This cares about multilines
 settings-osc-vrchat-description-v1 =
-    Modifier les paramètres spécifiques à la norme « OSC Trackers » utilisée pour l’envoi
+    Modifier les paramètres spécifiques à la norme « OSC Trackers » utilisée pour l'envoi
     des données de suivi vers des applications sans SteamVR (par exemple, sur Quest).
-    Assurez-vous d’activer le protocole OSC dans VRChat via le menu d'action (rond) sous OSC > Enabled.
-    Pour permettre de recevoir les données de suivi du casque VR et des manettes à partir de VRChat,
-    allez dans le menu principal sous Tracking & IK > Allow Sending Head and Wrist VR Tracking OSC Data.
+    Assurez-vous d'activer le protocole OSC dans VRChat via le menu d'action (rond) sous OSC > Enabled.
 settings-osc-vrchat-enable = Activer
 settings-osc-vrchat-enable-description = Activer/désactiver l'envoi et la réception de données.
 settings-osc-vrchat-enable-label = Activer
+settings-osc-vrchat-oscqueryEnabled = Activer OSCQuery
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery détecte automatiquement les instances VRChat en cours d'exécution et leur envoie des données.
+    Il peut également se faire détecter afin de recevoir les données du casque et des manettes VR.
+    Pour permettre de recevoir les données du casque et des manettes de VRChat, allez dans les paramètres de votre menu principal
+    sous « Suivi et CI » et activez « Autoriser l'envoi de données OSC de suivi en VR pour la tête et les poignets ».
+settings-osc-vrchat-oscqueryEnabled-label = Activer OSCQuery
 settings-osc-vrchat-network = Ports réseau
 settings-osc-vrchat-network-description-v1 = Définissez les ports d'écoute et d'envoi des données. Peut être laissé intact pour VRChat.
 settings-osc-vrchat-network-port_in =
@@ -645,12 +860,7 @@ settings-osc-vmc-network-address-description = Choisissez l'adresse vers laquell
 settings-osc-vmc-network-address-placeholder = Adresse IPv4
 settings-osc-vmc-vrm = Modèle VRM
 settings-osc-vmc-vrm-description = Chargez un modèle VRM pour permettre l'ancrage à la tête et permettre une plus grande compatibilité avec d'autres applications
-settings-osc-vmc-vrm-model_unloaded = Aucun modèle chargé
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Modèle chargé : { $name }
-       *[other] Modèle sans nom chargé
-    }
+settings-osc-vmc-vrm-untitled_model = Modèle sans nom
 settings-osc-vmc-vrm-file_select = Glissez et déposez un modèle à utiliser, ou <u>parcourir</u>.
 settings-osc-vmc-anchor_hip = Ancrage aux hanches
 settings-osc-vmc-anchor_hip-description = Ancrer la capture des mouvements aux hanches, utile pour le VTubing assis.
@@ -662,9 +872,9 @@ settings-osc-vmc-mirror_tracking-label = Inverser les mouvements
 ## Advanced settings
 
 settings-utils-advanced = Avancé
-settings-utils-advanced-reset-gui = Réinitialiser les paramètres de l’interface graphique
+settings-utils-advanced-reset-gui = Réinitialiser les paramètres de l'interface graphique
 settings-utils-advanced-reset-gui-description = Restaurez les paramètres par défaut de l'interface.
-settings-utils-advanced-reset-gui-label = Réinitialiser l’interface graphique
+settings-utils-advanced-reset-gui-label = Réinitialiser l'interface graphique
 settings-utils-advanced-reset-server = Réinitialiser les paramètres de la capture
 settings-utils-advanced-reset-server-description = Restaurez les paramètres par défaut de la capture
 settings-utils-advanced-reset-server-label = Réinitialiser la capture
@@ -685,9 +895,12 @@ settings-utils-advanced-reset_warning =
     }
 settings-utils-advanced-reset_warning-reset = Réinitialiser les paramètres
 settings-utils-advanced-reset_warning-cancel = Annuler
-settings-utils-advanced-open_data = Dossier des données
-settings-utils-advanced-open_data-description = Ouvre le dossier des données de SlimeVR dans l’explorateur de fichiers, contenant les fichiers de configuration ainsi que les logs.
+settings-utils-advanced-open_data-v1 = Dossier de configuration
+settings-utils-advanced-open_data-description-v1 = Ouvre le dossier de configuration de SlimeVR, contenant les fichiers de configuration, dans l'explorateur de fichier
 settings-utils-advanced-open_data-label = Ouvrir le dossier
+settings-utils-advanced-open_logs = Dossier des logs
+settings-utils-advanced-open_logs-description = Ouvre le dossier des logs de SlimeVR, contenant ses logs, dans l'explorateur de fichier
+settings-utils-advanced-open_logs-label = Ouvrir le dossier
 
 ## Setup/onboarding menu
 
@@ -714,6 +927,7 @@ onboarding-wifi_creds-submit = Valider
 onboarding-wifi_creds-ssid =
     .label = Nom du Wi-Fi
     .placeholder = Nom
+onboarding-wifi_creds-ssid-required = Le nom du Wi-Fi est requis
 onboarding-wifi_creds-password =
     .label = Mot de passe du Wi-Fi
     .placeholder = Mot de passe
@@ -771,12 +985,24 @@ onboarding-connect_tracker-issue-serial = J'ai des problèmes de connexion !
 onboarding-connect_tracker-usb = Capteur USB
 onboarding-connect_tracker-connection_status-none = Recherche de capteurs
 onboarding-connect_tracker-connection_status-serial_init = Connexion au périphérique en série
+onboarding-connect_tracker-connection_status-obtaining_mac_address = Obtention de l'adresse mac du capteur
 onboarding-connect_tracker-connection_status-provisioning = Envoi des identifiants Wi-Fi
 onboarding-connect_tracker-connection_status-connecting = Envoi d'identifiants Wi-Fi
 onboarding-connect_tracker-connection_status-looking_for_server = Recherche du serveur
 onboarding-connect_tracker-connection_status-connection_error = Impossible de se connecter au réseau
 onboarding-connect_tracker-connection_status-could_not_find_server = Impossible de trouver le serveur
 onboarding-connect_tracker-connection_status-done = Connecté au serveur
+onboarding-connect_tracker-connection_status-no_serial_log = Erreur lors de l'obtention des journaux du capteur
+onboarding-connect_tracker-connection_status-no_serial_device_found = Aucun capteur trouvé par USB
+onboarding-connect_serial-error-modal-no_serial_log = Le capteur est-il allumé ?
+onboarding-connect_serial-error-modal-no_serial_log-desc = Assurez-vous que le capteur est allumé et connecté à votre ordinateur
+onboarding-connect_serial-error-modal-no_serial_device_found = Aucun capteur détecté
+onboarding-connect_serial-error-modal-no_serial_device_found-desc =
+    Veuillez connecter un capteur avec le câble USB fourni à votre ordinateur et l'allumer.
+    Si cela ne fonctionne pas :
+      - Essayez avec un autre câble USB
+      - Essayez avec un autre port USB
+      - Essayez de réinstaller le serveur SlimeVR et cochez « USB Drivers » dans la section des composants
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -794,7 +1020,7 @@ onboarding-connect_tracker-next = J'ai connecté tous mes capteurs
 
 onboarding-calibration_tutorial = Tutoriel de calibration IMU
 onboarding-calibration_tutorial-subtitle = Ceci vous aidera à réduire la dérive du capteur !
-onboarding-calibration_tutorial-description = Chaque fois que vous allumez vos capteurs, ils doivent rester sur une surface plane pour se calibrer. Faisons de même en cliquant sur le bouton « { onboarding-calibration_tutorial-calibrate } ». <b>Ne les déplacez pas !</b>
+onboarding-calibration_tutorial-description-v1 = Après avoir allumé vos capteurs, placez-les sur une surface stable pendant un moment pour leur permettre de se calibrer. La calibration peut être effectué n'importe quand lors que les capteurs sont allumés - cette page sert simplement de tutoriel. Pour commencer, cliquez sur le bouton « { onboarding-calibration_tutorial-calibrate } », puis <b>ne déplacez pas vos capteurs !</b>
 onboarding-calibration_tutorial-calibrate = J'ai posé mes capteurs sur la table
 onboarding-calibration_tutorial-status-waiting = En attente de vous
 onboarding-calibration_tutorial-status-calibrating = Calibration...
@@ -809,7 +1035,7 @@ onboarding-assignment_tutorial-first_step = 1. Placez un autocollant de partie d
 # This text has a character limit of around 11 characters, so please keep it short
 onboarding-assignment_tutorial-sticker = Autocollant
 onboarding-assignment_tutorial-second_step-v2 = 2. Attachez la sangle à votre capteur en gardant le velcro de la sangle dans la même direction que le visage du capteur :
-onboarding-assignment_tutorial-second_step-continuation-v2 = Le velcro de l’extension doit être orienté vers le haut comme dans l’image suivante :
+onboarding-assignment_tutorial-second_step-continuation-v2 = Le velcro de l'extension doit être orienté vers le haut comme dans l'image suivante :
 onboarding-assignment_tutorial-done = J'ai mis les autocollants et les sangles !
 
 ## Tracker assignment setup
@@ -920,7 +1146,7 @@ onboarding-assign_trackers-warning-WAIST =
 
 ## Tracker mounting method choose
 
-onboarding-choose_mounting = Quelle méthode de calibration de l’alignement utiliser ?
+onboarding-choose_mounting = Quelle méthode de calibration de l'alignement utiliser ?
 # Multiline text
 onboarding-choose_mounting-description = La calibration de l'alignement ajuste pour l'orientation des capteurs sur votre corps.
 onboarding-choose_mounting-auto_mounting = Alignement automatique
@@ -962,44 +1188,27 @@ onboarding-automatic_mounting-mounting_reset-title = Réinitialisation de l'alig
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Accroupissez-vous dans une pose de "ski" avec les jambes pliées, le haut du corps incliné vers l'avant et les bras pliés.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Appuyez sur le bouton "Réinitialiser l'alignement" et attendez 3 secondes avant que l'alignement des capteurs se calibre.
 onboarding-automatic_mounting-preparation-title = Préparation
-onboarding-automatic_mounting-preparation-step-0 = 1. Tenez-vous debout avec vos bras à vos côtés.
-onboarding-automatic_mounting-preparation-step-1 = 2. Appuyez sur le bouton "Réinitialisation complète" et attendez 3 secondes avant que les capteurs ne se réinitialisent.
+onboarding-automatic_mounting-preparation-v2-step-0 = 1. Appuyez sur le bouton « Réinitialisation complète ».
+onboarding-automatic_mounting-preparation-v2-step-1 = 2. Tenez-vous droit debout, les bras le long du corps. Assurez-vous de regarder vers l’avant.
+onboarding-automatic_mounting-preparation-v2-step-2 = 3. Maintenez la position jusqu'à la fin du chronomètre de 3 secondes.
 onboarding-automatic_mounting-put_trackers_on-title = Enfilez vos capteurs
 onboarding-automatic_mounting-put_trackers_on-description = Pour calibrer l'alignement, nous allons utiliser les capteurs que vous venez d'attribuer.
 onboarding-automatic_mounting-put_trackers_on-next = J'ai tous mes capteurs
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = Quelle méthode de calibration des proportions utiliser ?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    Les proportions du corps sont utilisées pour connaître les mesures de votre corps. Elles sont requises pour calculer les positions des capteurs.
-    Lorsque les proportions de votre corps ne correspondent pas à celles enregistrées, la précision du suivi sera moins bonne et vous remarquerez certains problèmes comme du patinage ou de la glisse, ou votre corps ne correspondra pas bien à votre avatar.
-    <b>Vous n’avez besoin de mesurer les proportions de votre corps qu’une seule fois !</b> À moins qu’elle ne soient incorrectes ou que votre corps ait changé, vous n’avez pas besoin de les refaire.
-onboarding-choose_proportions-auto_proportions = Proportions automatiques
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = Recommendée
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Cela permettra d'estimer vos proportions en enregistrant un échantillon de vos mouvements et en le faisant passer par un algorithme.
-    
-    <b>Cela nécessite d’avoir votre casque VR connecté à SlimeVR et sur votre tête !</b>
-onboarding-choose_proportions-manual_proportions = Proportions manuelles
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = Pour les retouches
-onboarding-choose_proportions-manual_proportions-description = Ceci vous permettra d'ajuster vos proportions manuellement en les modifiant directement
-onboarding-choose_proportions-export = Exporter les proportions
-onboarding-choose_proportions-import = Importer les proportions
-onboarding-choose_proportions-import-success = Importé
-onboarding-choose_proportions-import-failed = Raté
-onboarding-choose_proportions-file_type = Fichier de proportions
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Revenir au didacticiel de réinitialisation
 onboarding-manual_proportions-title = Proportions manuelles du corps
-onboarding-manual_proportions-precision = Ajustement de précision
-onboarding-manual_proportions-auto = Calibration automatique
-onboarding-manual_proportions-ratio = Ajuster par groupes de ratios
+onboarding-manual_proportions-fine_tuning_button = Automatiquement ajuster les proportions
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Veuillez connecter un casque VR pour utiliser l'ajustement automatique
+onboarding-manual_proportions-export = Exporter les proportions
+onboarding-manual_proportions-import = Importer les proportions
+onboarding-manual_proportions-file_type = Fichier des proportions du corps
+onboarding-manual_proportions-normal_increment = Incrément normal
+onboarding-manual_proportions-precise_increment = Incrément précis
+onboarding-manual_proportions-grouped_proportions = Proportions groupées
+onboarding-manual_proportions-all_proportions = Toutes les proportions
+onboarding-manual_proportions-estimated_height = Taille estimée de l'utilisateur
 
 ## Tracker automatic proportions setup
 
@@ -1020,23 +1229,35 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Votre casque envoie sa position au serveur SlimeVR (cela signifie généralement que SteamVR est ouvert et connecté à SlimeVR en utilisant le pilote SteamVR de SlimeVR).
     La capture des mouvements fonctionne et représente correctement vos mouvements (ex. vous avez effectué une réinitialisation complète des capteurs et ils bougent dans le bon sens lorsque vous donnez des coups de pieds, vous penchez, vous assoyez, etc).
 onboarding-automatic_proportions-requirements-next = J'ai lu les exigences
-onboarding-automatic_proportions-check_height-title = Vérifiez votre taille
-onboarding-automatic_proportions-check_height-description = Nous utilisons votre taille comme la base de nos mesures en utilisant la hauteur de votre casque comme approximation de votre taille réelle, mais il est préférable de vérifier si elles sont correctes vous-même !
+onboarding-automatic_proportions-check_height-title-v3 = Mesurez la hauteur de votre casque
+onboarding-automatic_proportions-check_height-description-v2 = La hauteur de votre casque VR doit être légèrement inférieure à votre hauteur totale, car les casques sont à la hauteur de vos yeux. Cette mesure servira de référence pour les proportions de votre corps.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Veuillez appuyer sur le bouton en vous <u>tenant debout</u> pour calculer votre taille. Vous avez un délais de 3 secondes après avoir appuyé sur le bouton !
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Commencez à mesurer <u>droit</u> debout pour mesurer votre taille. Attention à ne pas lever vos mains plus haut que votre casque, car elles pourraient affecter la mesure !
 onboarding-automatic_proportions-check_height-guardian_tip =
-    Si vous utilisez un casque VR sans-fil, assurez-vous d’avoir votre guardien/
+    Si vous utilisez un casque VR sans-fil, assurez-vous d'avoir votre guardien /
     limite activée pour que votre hauteur soit correcte !
-onboarding-automatic_proportions-check_height-fetch_height = Je suis debout !
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Inconnu
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = La hauteur de votre casque est
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = donc votre taille est
+onboarding-automatic_proportions-check_height-hmd_height2 = La hauteur de votre casque est de :
+onboarding-automatic_proportions-check_height-measure-start = Commencer à mesurer
+onboarding-automatic_proportions-check_height-measure-stop = Arrêter de mesurer
+onboarding-automatic_proportions-check_height-measure-reset = Réessayer la mesure
 onboarding-automatic_proportions-check_height-next_step = Ils sont bons
+onboarding-automatic_proportions-check_floor_height-title = Mesurer la hauteur de votre sol (facultatif)
+onboarding-automatic_proportions-check_floor_height-description = Dans certains cas, la hauteur de votre sol peut ne pas être réglée correctement par votre casque, ce qui fait que la hauteur du casque est mesurée comme étant plus élevée qu'elle ne devrait l'être. Vous pouvez mesurer la « hauteur » de votre sol pour corriger cela.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Commencez à mesurer et placez une manette sur votre sol pour mesurer sa hauteur. Si vous êtes sûr que la hauteur de votre sol est correcte, vous pouvez sauter cette étape.
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = La hauteur de votre sol est de :
+onboarding-automatic_proportions-check_floor_height-full_height = Votre hauteur totale estimée est :
+onboarding-automatic_proportions-check_floor_height-measure-start = Commencer à mesurer
+onboarding-automatic_proportions-check_floor_height-measure-stop = Arrêter de mesurer
+onboarding-automatic_proportions-check_floor_height-measure-reset = Réessayer la mesure
+onboarding-automatic_proportions-check_floor_height-skip_step = Sauter l'étape et enregistrer
+onboarding-automatic_proportions-check_floor_height-next_step = Utiliser la hauteur du sol et enregistrer
 onboarding-automatic_proportions-start_recording-title = Préparez-vous à bouger
-onboarding-automatic_proportions-start_recording-description = Nous allons maintenant enregistrer quelques positions et mouvements spécifiques. Ceux-ci seront inscris sur l’écran suivant. Soyez prêt à commencer dès que vous appuyez sur le bouton !
+onboarding-automatic_proportions-start_recording-description = Nous allons maintenant enregistrer quelques positions et mouvements spécifiques. Ceux-ci seront inscris sur l'écran suivant. Soyez prêt à commencer dès que vous appuyez sur le bouton !
 onboarding-automatic_proportions-start_recording-next = Commencer l'enregistrement
 onboarding-automatic_proportions-recording-title = Enregistrement
 onboarding-automatic_proportions-recording-description-p0 = Enregistrement en cours...
@@ -1065,10 +1286,73 @@ onboarding-automatic_proportions-verify_results-confirm = Les résultats sont co
 onboarding-automatic_proportions-done-title = Calibration terminée
 onboarding-automatic_proportions-done-description = La calibration de vos proportions est terminée !
 onboarding-automatic_proportions-error_modal-v2 =
-    <b>Avertissement:</b> Il y a eu une erreur lors de l’estimation des proportions !
-    Il s’agit probablement d’un problème avec la calibration de l'alignement. Assurez-vous que votre capture des mouvements fonctionne correctement avant de réessayer.
-     Veuillez <docs>consulter la documentation</docs> ou rejoindre notre <discord>Discord</discord> pour obtenir de l’aide ^_^
+    <b>Avertissement:</b> Il y a eu une erreur lors de l'estimation des proportions !
+    Il s'agit probablement d'un problème avec la calibration de l'alignement. Assurez-vous que votre capture des mouvements fonctionne correctement avant de réessayer.
+     Veuillez <docs>consulter la documentation</docs> ou rejoindre notre <discord>Discord</discord> pour obtenir de l'aide ^_^
 onboarding-automatic_proportions-error_modal-confirm = Compris !
+onboarding-automatic_proportions-smol_warning =
+    Votre hauteur configurée de { $height } est inférieure à la hauteur minimale acceptée de { $minHeight }.
+    <b>Veuillez refaire les mesures et vous assurer qu'elles sont correctes.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Retour
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = Proportions à l'échelle
+onboarding-scaled_proportions-description = Pour que les capteurs SlimeVR fonctionnent, nous avons besoin de connaître la longueur de vos os. Cela utilisera une proportion moyenne et l'ajustera en fonction de votre taille.
+onboarding-scaled_proportions-manual_height-title = Configuration de votre taille
+onboarding-scaled_proportions-manual_height-description-v2 = Cette hauteur sera utilisée comme base pour les proportions de votre corps.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR n'est actuellement pas connecté à SlimeVR, les mesures ne peuvent donc pas être basées sur votre casque. <b>Procédez à vos risques et périls ou consultez la documentation !</b>
+onboarding-scaled_proportions-manual_height-height-v2 = Votre hauteur totale est :
+onboarding-scaled_proportions-manual_height-estimated_height = La hauteur estimée de votre casque est de :
+onboarding-scaled_proportions-manual_height-next_step = Continuer et enregistrer
+onboarding-scaled_proportions-manual_height-warning =
+    Vous utilisez actuellement le réglage manuel de la mise à l'échelle des proportions !
+    <b>Ce mode est recommandé uniquement si vous n'utilisez pas de casque VR avec SlimeVR</b>
+    
+    Pour pouvoir utiliser les proportions mises à l’échelle automatiquement, veuillez :
+onboarding-scaled_proportions-manual_height-warning-no_hmd = Connecter un casque VR
+onboarding-scaled_proportions-manual_height-warning-no_controllers = Assurez-vous que vos manettes sont connectées et correctement assignées à vos mains
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = Réinitialiser les proportions de votre corps
+onboarding-scaled_proportions-reset_proportion-description = Pour définir les proportions de votre corps en fonction de votre taille, vous devez réinitialiser toutes vos proportions. Cela remplacera les proportions que vous avez configurées par une configuration de base.
+onboarding-scaled_proportions-done-title = Ensemble de proportions du corps
+onboarding-scaled_proportions-done-description = Les proportions de votre corps devraient maintenant être configurées à partir de votre taille.
+
+## Stay Aligned setup
+
+onboarding-stay_aligned-title = Garder Aligné
+onboarding-stay_aligned-description = Configurer Garder Aligné pour garder vos capteurs alignés.
+onboarding-stay_aligned-put_trackers_on-title = Mettez vos capteurs
+onboarding-stay_aligned-put_trackers_on-description = Pour enregistrer vos postures de repos, nous utiliserons les capteurs que vous venez d’attribuer. Enfilez tous vos capteurs. Vous pouvez voir lesquels sont lesquels dans la figure de droite.
+onboarding-stay_aligned-put_trackers_on-trackers_warning = Vous avez actuellement moins de 5 capteurs connectés et attribués ! Il s’agit du nombre minimum de capteurs requis pour que Garder Aligné fonctionne correctement.
+onboarding-stay_aligned-put_trackers_on-next = J'ai tous mes capteurs sur moi
+onboarding-stay_aligned-verify_mounting-title = Vérifiez votre alignement
+onboarding-stay_aligned-verify_mounting-step-0 = Garder Aligné nécessite un bon alignement. Sinon, vous n'aurez pas une bonne expérience avec Garder Aligné.
+onboarding-stay_aligned-verify_mounting-step-1 = 1. Déplacez-vous debout.
+onboarding-stay_aligned-verify_mounting-step-2 = 2. Asseyez-vous et bougez vos jambes et vos pieds.
+onboarding-stay_aligned-verify_mounting-step-3 = 3. Si vos capteurs ne sont pas au bons endroits, appuyez sur « Refaire la calibration de l'alignement »
+onboarding-stay_aligned-verify_mounting-redo_mounting = Refaire la calibration de l'alignement
+onboarding-stay_aligned-preparation-title = Préparation
+onboarding-stay_aligned-preparation-tip = Assurez-vous de vous tenir droit. Vous devez regarder vers l'avant et vos bras doivent être le long de votre corps.
+onboarding-stay_aligned-relaxed_poses-standing-title = Posture debout détendu
+onboarding-stay_aligned-relaxed_poses-standing-step-0 = 1. Tenez-vous dans une position confortable. Détendez-vous !
+onboarding-stay_aligned-relaxed_poses-standing-step-1-v2 = 2. Appuyez sur le bouton « Enregistrer la posture ».
+onboarding-stay_aligned-relaxed_poses-sitting-title = Posture assis détendu dans une chaise
+onboarding-stay_aligned-relaxed_poses-sitting-step-0 = 1. Asseyez-vous dans une position confortable. Détendez-vous !
+onboarding-stay_aligned-relaxed_poses-sitting-step-1-v2 = 2. Appuyez sur le bouton « Enregistrer la posture ».
+onboarding-stay_aligned-relaxed_poses-flat-title = Posture assis détendu sur le sol
+onboarding-stay_aligned-relaxed_poses-flat-step-0 = 1. Asseyez-vous sur le sol, les jambes devant. Détendez-vous !
+onboarding-stay_aligned-relaxed_poses-flat-step-1-v2 = 2. Appuyez sur le bouton « Enregistrer la posture ».
+onboarding-stay_aligned-relaxed_poses-skip_step = Sauter
+onboarding-stay_aligned-done-title = Garder Aligné activé !
+onboarding-stay_aligned-done-description = La configuration de Garder Aligné est terminée !
+onboarding-stay_aligned-done-description-2 = La configuration est terminée ! Vous pouvez recommencer le processus si vous souhaitez recalibrer les postures.
+onboarding-stay_aligned-previous_step = Précédent
+onboarding-stay_aligned-next_step = Prochain
+onboarding-stay_aligned-restart = Recommencer
+onboarding-stay_aligned-done = Fait
 
 ## Home
 
@@ -1093,6 +1377,150 @@ status_system-StatusSteamVRDisconnected =
     }
 status_system-StatusTrackerError = Le capteur { $trackerName } a une erreur.
 status_system-StatusUnassignedHMD = Le casque VR devrait être attribué en tant que capteur de la tête.
+status_system-StatusPublicNetwork = Votre profil réseau est actuellement défini comme étant public. Ce n’est pas recommandé pour le fonctionnement correct de SlimeVR. <PublicFixLink>Voyez comment y remédier ici.</PublicFixLink>
+
+## Firmware tool globals
+
+firmware_tool-next_step = Prochaine étape
+firmware_tool-previous_step = Étape précédente
+firmware_tool-ok = Parfait
+firmware_tool-retry = Réessayer
+firmware_tool-loading = Chargement...
+
+## Firmware tool Steps
+
+firmware_tool = Outil de micrologiciel DIY
+firmware_tool-description = Vous permet de configurer et de flash vos capteurs DIY
+firmware_tool-not_available = Oups, l'outil de micrologiciel n'est pas disponible en ce moment. Revenez plus tard !
+firmware_tool-not_compatible = L'outil de micrologiciel n'est pas compatible avec cette version de serveur. Veuillez mettre à jour votre serveur !
+firmware_tool-board_step = Sélectionnez votre carte
+firmware_tool-board_step-description = Sélectionnez l'une des cartes répertoriées ci-dessous.
+firmware_tool-board_pins_step = Vérifiez les broches
+firmware_tool-board_pins_step-description =
+    Veuillez vérifier que les broches sélectionnées sont correctes.
+    Si vous avez suivi la documentation de SlimeVR, les valeurs par défaut devraient être correctes.
+firmware_tool-board_pins_step-enable_led = Activer la LED
+firmware_tool-board_pins_step-led_pin =
+    .label = Broche LED
+    .placeholder = Entrez l'adresse de la broche LED
+firmware_tool-board_pins_step-battery_type = Sélectionnez le type de batterie
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Batterie externe
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Batterie interne
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = MCP3021 interne
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = Broche du capteur de batterie
+    .placeholder = Entrez l'adresse de la broche du capteur de batterie
+firmware_tool-board_pins_step-battery_resistor =
+    .label = Résistance de la batterie (Ohms)
+    .placeholder = Entrer la valeur de la résistance de la batterie
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = Bouclier de batterie R1 (Ohms)
+    .placeholder = Saisir la valeur du bouclier de batterie R1
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = Bouclier de batterie R2 (Ohms)
+    .placeholder = Saisir la valeur du bouclier de batterie R1
+firmware_tool-add_imus_step = Déclarez vos IMU
+firmware_tool-add_imus_step-description =
+    Veuillez ajouter les IMUs de votre capteur
+    Si vous avez suivi la documentation de SlimeVR, les valeurs par défaut devraient être correctes
+firmware_tool-add_imus_step-imu_type-label = Type d'IMU
+firmware_tool-add_imus_step-imu_type-placeholder = Sélectionnez le type d'IMU
+firmware_tool-add_imus_step-imu_rotation =
+    .label = Rotation de l'IMU (deg)
+    .placeholder = Angle de rotation de l'IMU
+firmware_tool-add_imus_step-scl_pin =
+    .label = Broche SCL
+    .placeholder = Adresse de la broche SCL
+firmware_tool-add_imus_step-sda_pin =
+    .label = Broche SDA
+    .placeholder = Adresse de la broche SDA
+firmware_tool-add_imus_step-int_pin =
+    .label = Broche INT
+    .placeholder = Adresse de la broche INT
+firmware_tool-add_imus_step-optional_tracker =
+    .label = Capteur optionnel
+firmware_tool-add_imus_step-show_less = Afficher moins
+firmware_tool-add_imus_step-show_more = Afficher plus
+firmware_tool-add_imus_step-add_more = Ajouter plus d'IMUs
+firmware_tool-select_firmware_step = Sélectionnez la version du micrologiciel
+firmware_tool-select_firmware_step-description = Veuillez choisir la version du micrologiciel que vous souhaitez utiliser
+firmware_tool-select_firmware_step-show-third-party =
+    .label = Afficher les micrologiciels de tierces parties
+firmware_tool-flash_method_step = Méthode de flash
+firmware_tool-flash_method_step-description = Veuillez sélectionner la méthode de flash que vous souhaitez utiliser
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Utiliser la méthode « over the air ». Votre capteur utilisera le Wi-Fi pour mettre à jour son micrologiciel. Ne fonctionne que sur les capteurs déjà configurés.
+firmware_tool-flash_method_step-serial =
+    .label = Série
+    .description = Utiliser un cable USB pour mettre à jour votre capteur
+firmware_tool-flashbtn_step = Appuyez sur le bouton boot
+firmware_tool-flashbtn_step-description = Avant de passer à l'étape suivante, il y a quelques choses que vous devez faire
+firmware_tool-flashbtn_step-board_SLIMEVR = Éteignez le capteur, retirez le boîtier (s'il y en a un), connectez un câble USB à votre ordinateur, puis effectuez l'une des étapes suivantes en fonction de la révision de votre carte SlimeVR :
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Allumez le capteur tout en court-circuitant le deuxième pad FLASH rectangulaire à partir du bord sur la face supérieure de la carte et du bouclier métallique du microcontrôleur
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Allumez le tracker tout en court-circuitant le pad FLASH circulaire sur le côté supérieur de la carte et le bouclier métallique du microcontrôleur
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Allumez le tracker tout en appuyant sur le bouton FLASH situé sur la partie supérieure de la carte
+firmware_tool-flashbtn_step-board_OTHER =
+    Avant de flash le capteur, vous devrez probablement le mettre en mode bootloader.
+    La plupart du temps, il s'agit d'appuyer sur le bouton boot de la carte avant que le processus de flash ne commence.
+    Si le processus de flash expire au début du flash, cela signifie probablement que le capteur n'était pas en mode bootloader
+    Veuillez vous référer aux instructions de flash de votre carte pour savoir comment activer le mode boatloader
+firmware_tool-flash_method_ota-devices = Appareils OTA détectés :
+firmware_tool-flash_method_ota-no_devices = Il n'y a aucune carte pouvant être mise à jour à l'aide d'OTA, assurez-vous d'avoir sélectionné le bon type de carte
+firmware_tool-flash_method_serial-wifi = Identifiants Wi-Fi :
+firmware_tool-flash_method_serial-devices-label = Appareils en série détectés :
+firmware_tool-flash_method_serial-devices-placeholder = Sélectionnez un appareil en série
+firmware_tool-flash_method_serial-no_devices = Aucun appareil en série compatible n'est détecté, assurez-vous que le capteur est branché
+firmware_tool-build_step = Création
+firmware_tool-build_step-description = Le micrologiciel se fait créer, veuillez patienter
+firmware_tool-flashing_step = En train de flash
+firmware_tool-flashing_step-description = Vos traceurs se font flash, veuillez suivre les instructions à l'écran
+firmware_tool-flashing_step-warning-v2 = Ne débranchez pas ou n'éteignez pas le capteur pendant le processus d'envoi à moins qu'on ne vous le dise, cela pourrait rendre votre carte inutilisable
+firmware_tool-flashing_step-flash_more = Flash plus de capteurs
+firmware_tool-flashing_step-exit = Quitter
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = Création du dossier de création
+firmware_tool-build-DOWNLOADING_FIRMWARE = Téléchargement du micrologiciel
+firmware_tool-build-EXTRACTING_FIRMWARE = Extraction du micrologiciel
+firmware_tool-build-SETTING_UP_DEFINES = Configuration des définitions
+firmware_tool-build-BUILDING = Création du micrologiciel
+firmware_tool-build-SAVING = Enregistrement du micrologiciel
+firmware_tool-build-DONE = Création terminée
+firmware_tool-build-ERROR = Impossible de créer le micrologiciel
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = Téléchargement du micrologiciel
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = Veuillez éteindre et rallumer votre capteur
+firmware_update-status-AUTHENTICATING = Authentification avec le MCU
+firmware_update-status-UPLOADING = Envoi du micrologiciel
+firmware_update-status-SYNCING_WITH_MCU = Synchronisation avec le MCU
+firmware_update-status-REBOOTING = Application de la mise à jour
+firmware_update-status-PROVISIONING = Envoi des identifiants Wi-Fi
+firmware_update-status-DONE = Mise à jour terminée !
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = Impossible de trouver l'appareil
+firmware_update-status-ERROR_TIMEOUT = Le processus de mise à jour a dépassé le délai alloué
+firmware_update-status-ERROR_DOWNLOAD_FAILED = Échec du téléchargement du micrologiciel
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = Échec de l'authentification avec le MCU
+firmware_update-status-ERROR_UPLOAD_FAILED = Échec de l'envoi du micrologiciel
+firmware_update-status-ERROR_PROVISIONING_FAILED = Impossible de définir les informations d'identification Wi-Fi
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = La méthode de mise à jour n'est pas prise en charge
+firmware_update-status-ERROR_UNKNOWN = Erreur inconnue
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = Mise à jour du micrologiciel
+firmware_update-devices = Appareils disponibles
+firmware_update-devices-description = Veuillez sélectionner les capteurs que vous souhaitez mettre à jour à la dernière version du micrologiciel SlimeVR
+firmware_update-no_devices = Assurez-vous que les capteurs que vous souhaitez mettre à jour sont allumés et connectés au Wi-Fi !
+firmware_update-changelog-title = Mise à jour vers { $version }
+firmware_update-looking_for_devices = Recherche d'appareils à mettre à jour...
+firmware_update-retry = Réessayer
+firmware_update-update = Mettre à jour les capteurs sélectionnés
+firmware_update-exit = Quitter
 
 ## Tray Menu
 
@@ -1116,7 +1544,57 @@ tray_or_exit_modal-cancel = Annuler
 
 unknown_device-modal-title = Un nouveau capteur a été trouvé !
 unknown_device-modal-description =
-    Il y a un nouveau capteur avec l’adresse MAC <b>{ $deviceId }</b>.
+    Il y a un nouveau capteur avec l'adresse MAC <b>{ $deviceId }</b>.
     Voulez-vous le connecter à SlimeVR ?
 unknown_device-modal-confirm = Oui!
 unknown_device-modal-forget = Ignorer
+# VRChat config warnings
+vrc_config-page-title = Avertissements de configuration VRChat
+vrc_config-page-desc = Cette page montre l’état de vos paramètres VRChat et montre quels paramètres sont incompatibles avec SlimeVR. Il est fortement recommandé de corriger tous les avertissements qui s’affichent ici pour la meilleure expérience utilisateur avec SlimeVR.
+vrc_config-page-help = Vous ne trouvez pas les paramètres ?
+vrc_config-page-help-desc = Consultez notre <a>documentation à ce sujet !</a>
+vrc_config-page-big_menu = Suivi et CI (menu principal)
+vrc_config-page-big_menu-desc = Paramètres liés au suivi dans le menu principal
+vrc_config-page-wrist_menu = Suivi et CI (menu rapide)
+vrc_config-page-wrist_menu-desc = Paramètres liés au suivi dans le petit menu des paramètres (menu rapide)
+vrc_config-on = Activé
+vrc_config-off = Désactivé
+vrc_config-invalid = Vous avez des paramètres VRChat mal configurés !
+vrc_config-show_more = Afficher plus
+vrc_config-setting_name = Nom du paramètre VRChat
+vrc_config-recommended_value = Valeur recommandée
+vrc_config-current_value = Valeur actuelle
+vrc_config-mute = Ignorer l'avertissement
+vrc_config-mute-btn = Ignorer
+vrc_config-unmute-btn = Ne plus ignorer
+vrc_config-legacy_mode = Utiliser l'ancienne méthode de résolution de la CI
+vrc_config-disable_shoulder_tracking = Désactiver le suivi des épaules
+vrc_config-shoulder_width_compensation = Compensation de la largeur des épaules
+vrc_config-spine_mode = Mode colonne vertébrale du suivi du corps
+vrc_config-tracker_model = Apparence des traqueurs du suivi du corps
+vrc_config-avatar_measurement_type = Mesure de l'avatar
+vrc_config-calibration_range = Plage de calibration
+vrc_config-calibration_visuals = Afficher les visuels de calibration
+vrc_config-user_height = Taille réelle de l'utilisateur
+vrc_config-spine_mode-UNKNOWN = Inconnu
+vrc_config-spine_mode-LOCK_BOTH = Verrouiller les deux
+vrc_config-spine_mode-LOCK_HEAD = Verrouiller la tête
+vrc_config-spine_mode-LOCK_HIP = Verrouiller la hanche
+vrc_config-tracker_model-UNKNOWN = Inconnu
+vrc_config-tracker_model-AXIS = Axe
+vrc_config-tracker_model-BOX = Cube
+vrc_config-tracker_model-SPHERE = Sphère
+vrc_config-tracker_model-SYSTEM = Système
+vrc_config-avatar_measurement_type-UNKNOWN = Inconnu
+vrc_config-avatar_measurement_type-HEIGHT = Taille
+vrc_config-avatar_measurement_type-ARM_SPAN = Envergure des bras
+
+## Error collection consent modal
+
+error_collection_modal-title = Avons nous l'autorisation de collecter les erreurs ?
+error_collection_modal-description_v2 =
+    { settings-interface-behavior-error_tracking-description_v2 }
+    
+    Vous pouvez modifier ce paramètre ultérieurement dans la section "Comportement" des paramètres.
+error_collection_modal-confirm = Je suis d'accord
+error_collection_modal-cancel = Je ne veux pas

gui/public/i18n/ja/translation.ftl

@@ -49,6 +49,37 @@ body_part-LEFT_HAND = 左手
 body_part-LEFT_UPPER_LEG = 左膝
 body_part-LEFT_LOWER_LEG = 左足
 body_part-LEFT_FOOT = 左足先
+body_part-LEFT_THUMB_PROXIMAL = 左母指近位部
+body_part-LEFT_THUMB_DISTAL = 左母指遠位部
+body_part-LEFT_INDEX_PROXIMAL = 左人差指近位部
+body_part-LEFT_INDEX_INTERMEDIATE = 左人差指中間部
+body_part-LEFT_INDEX_DISTAL = 左人差指遠位部
+body_part-LEFT_MIDDLE_PROXIMAL = 左中指近位部
+body_part-LEFT_MIDDLE_INTERMEDIATE = 左中指中間部
+body_part-LEFT_MIDDLE_DISTAL = 左中指遠位部
+body_part-LEFT_RING_PROXIMAL = 左薬指近位部
+body_part-LEFT_RING_INTERMEDIATE = 左薬指中間部
+body_part-LEFT_RING_DISTAL = 左薬指遠位部
+body_part-LEFT_LITTLE_PROXIMAL = 左小指近位部
+body_part-LEFT_LITTLE_INTERMEDIATE = 左小指中間部
+body_part-LEFT_LITTLE_DISTAL = 左小指遠位部
+body_part-RIGHT_THUMB_PROXIMAL = 右母指近位部
+body_part-RIGHT_THUMB_DISTAL = 右母指遠位部
+body_part-RIGHT_INDEX_PROXIMAL = 右人差指近位部
+body_part-RIGHT_INDEX_INTERMEDIATE = 右人差指中間部
+body_part-RIGHT_INDEX_DISTAL = 右人差指遠位部
+body_part-RIGHT_MIDDLE_PROXIMAL = 右中指近位部
+body_part-RIGHT_MIDDLE_INTERMEDIATE = 右中指中間部
+body_part-RIGHT_MIDDLE_DISTAL = 右中指遠位部
+body_part-RIGHT_RING_PROXIMAL = 右薬指近位部
+body_part-RIGHT_RING_INTERMEDIATE = 右薬指中間部
+body_part-RIGHT_RING_DISTAL = 右薬指遠位部
+body_part-RIGHT_LITTLE_PROXIMAL = 右小指近位部
+body_part-RIGHT_LITTLE_INTERMEDIATE = 右小指中間部
+body_part-RIGHT_LITTLE_DISTAL = 右小指遠位部
+
+## BoardType
+
 
 ## Proportions
 
@@ -144,7 +175,6 @@ widget-developer_mode-more_info = 他情報
 widget-imu_visualizer = 回転
 widget-imu_visualizer-rotation_raw = 生
 widget-imu_visualizer-rotation_preview = 生
-widget-imu_visualizer-rotation_hide = 隠す
 
 ## Widget: Skeleton Visualizer
 
@@ -213,12 +243,18 @@ tracker-settings-mounting_section-edit = 装着向きの編集
 tracker-settings-drift_compensation_section = ドリフト補正を行う
 tracker-settings-drift_compensation_section-description = ドリフト補正が有効になっている場合、このトラッカーはドリフトを補正する必要がありますか?
 tracker-settings-drift_compensation_section-edit = ドリフト補正を行う
+# Multiline!
+tracker-settings-use_mag-description =
+    このトラッカーは、マグネトメーターの使用が許可されている場合、ドリフトを減らすためにマグネトメーターを使用すべきですか？ <b>設定を切り替える際は、トラッカーをシャットダウンしないでください！</b>
+    
+    まず、マグネトメーターの使用を許可する必要があります。<magSetting>設定に移動するにはここをクリックしてください</magSetting>。
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = トラッカー名称
 tracker-settings-name_section-description = 自由に名称をつけてください
 tracker-settings-name_section-placeholder = NightyBeast's left leg
 tracker-settings-forget = フォーゲット・トラッカー
+tracker-settings-forget-description = スライムVRサーバーからトラッカーを削除し、サーバーが再起動するまで接続できないようにします。トラッカーの設定は失われません。
 tracker-settings-forget-label = フォーゲット・トラッカー
 
 ## Tracker part card info
@@ -307,6 +343,10 @@ settings-general-steamvr-description =
     SlimeVRが行うことをよりコントロールしたい場合に便利です。
 settings-general-steamvr-trackers-waist = 腰
 settings-general-steamvr-trackers-chest = 胸
+settings-general-steamvr-trackers-tracker_toggling-description = 現在のトラッカー割り当てに応じて、SteamVRトラッカーのオン・オフを自動的に切り替えます。
+settings-general-steamvr-trackers-hands-warning =
+    <b>警告：</b> ハンドトラッカーはコントローラーを上書きします。
+    よろしいですか？
 settings-general-steamvr-trackers-hands-warning-cancel = キャンセル
 settings-general-steamvr-trackers-hands-warning-done = はい
 
@@ -377,9 +417,6 @@ settings-general-fk_settings-skeleton_settings-ratios = スケルトン比率
 settings-general-fk_settings-skeleton_settings-ratios-description = スケルトン設定の値を変更する。これらを変更した後、体の比率を調整する必要があるかもしれません。
 settings-general-fk_settings-skeleton_settings-impute_waist_from_chest_hip = 胸から腰への推定
 settings-general-fk_settings-self_localization-title = モーションキャプチャモード
-settings-general-fk_settings-vive_emulation-title = Viveエミュレーション
-settings-general-fk_settings-vive_emulation-description = Viveトラッカーが抱える腰トラッカーの問題をエミュレートします。
-settings-general-fk_settings-vive_emulation-label = Viveエミュレーションの有効化
 
 ## Gesture control settings (tracker tapping)
 
@@ -409,9 +446,6 @@ settings-general-gesture_control-mountingResetTaps = タップによるマウン
 ## Appearance settings
 
 settings-interface-appearance = 外観
-settings-general-interface-dev_mode = 開発者モード
-settings-general-interface-dev_mode-description = このモードは、詳細なデータが必要な場合や、接続されたトラッカーをより高度なレベルで操作する場合に役立ちます。
-settings-general-interface-dev_mode-label = 開発者モード
 settings-general-interface-theme = カラーテーマ
 settings-general-interface-lang = 言語を選択
 settings-general-interface-lang-description = 使用したいデフォルトの言語を変更する
@@ -432,6 +466,12 @@ settings-general-interface-feedback_sound = フィードバック音
 settings-general-interface-feedback_sound-label = フィードバック音
 settings-general-interface-feedback_sound-volume = フィードバック音量
 settings-general-interface-connected_trackers_warning = 接続されたトラッカー警告
+
+## Behavior settings
+
+settings-general-interface-dev_mode = 開発者モード
+settings-general-interface-dev_mode-description = このモードは、詳細なデータが必要な場合や、接続されたトラッカーをより高度なレベルで操作する場合に役立ちます。
+settings-general-interface-dev_mode-label = 開発者モード
 settings-general-interface-use_tray-label = システムトレイに最小化する
 
 ## Serial settings
@@ -514,6 +554,9 @@ settings-osc-vmc-network-address = ネットワークアドレス
 settings-osc-vmc-network-address-placeholder = IPV4アドレス
 settings-osc-vmc-vrm = VRMモデル
 
+## Advanced settings
+
+
 ## Setup/onboarding menu
 
 onboarding-skip = 設定をスキップする
@@ -653,13 +696,7 @@ onboarding-automatic_mounting-put_trackers_on-title = トラッカーを装着
 onboarding-automatic_mounting-put_trackers_on-description = マウントの方向を較正するために、先ほど割り当てたトラッカーを使用します。右の図でどれがどれだかわかると思います。
 onboarding-automatic_mounting-put_trackers_on-next = すべてのトラッカーを装着しました
 
-## Tracker proportions method choose
-
-# Italized text
-onboarding-choose_proportions-auto_proportions-subtitle = おすすめされた
-onboarding-choose_proportions-import-failed = 失敗
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = チュートリアルをリセットする
 onboarding-manual_proportions-title = マニュアルボディプロポーション
@@ -703,6 +740,12 @@ onboarding-automatic_proportions-done-title = 体を測定して保存
 onboarding-automatic_proportions-done-description = ボディプロポーションのキャリブレーションが完了しました！
 onboarding-automatic_proportions-error_modal-confirm = 了解!
 
+## Tracker scaled proportions setup
+
+
+## Tracker scaled proportions reset
+
+
 ## Home
 
 home-no_trackers = トラッカーを検出できません。もしくは割り当てられていません。
@@ -722,6 +765,21 @@ status_system-StatusSteamVRDisconnected =
     }
 status_system-StatusTrackerError = { $trackerName } トラッカーにエラーが発生しています
 
+## Firmware tool globals
+
+
+## Firmware tool Steps
+
+
+## firmware tool build status
+
+
+## Firmware update status
+
+
+## Dedicated Firmware Update Page
+
+
 ## Tray Menu
 
 tray_menu-show = ショー
@@ -737,3 +795,6 @@ tray_or_exit_modal-cancel = キャンセル
 
 unknown_device-modal-confirm = もちろん!
 unknown_device-modal-forget = 無視する
+
+## Error collection consent modal
+

gui/public/i18n/ko/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = 서버에 연결하는 중...
 websocket-connection_lost = 서버와의 연결이 끊어졌어요. 다시 연결하는 중...
+websocket-connection_lost-desc = SlimeVR 서버에 오류가 발생한 것 같습니다. 로그를 확인하고 프로그램을 재시작해 주세요
+websocket-timedout = 서버에 연결할 수 없습니다
+websocket-timedout-desc = SlimeVR 서버에 오류가 발생했거나 연결 시간이 초과된 것 같습니다. 로그를 확인하고 프로그램을 재시작해 주세요
+websocket-error-close = SlimeVR 종료
+websocket-error-logs = 로그 폴더 열기
 
 ## Update notification
 
@@ -50,6 +55,28 @@ body_part-LEFT_UPPER_LEG = 왼쪽 다리 위
 body_part-LEFT_LOWER_LEG = 왼쪽 다리 아래
 body_part-LEFT_FOOT = 왼발
 
+## BoardType
+
+board_type-UNKNOWN = 알 수 없음
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = 커스텀 보드
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU Glove
+
 ## Proportions
 
 skeleton_bone-NONE = 없음
@@ -81,11 +108,14 @@ skeleton_bone-ELBOW_OFFSET = 팔꿈치 오프셋
 ## Tracker reset buttons
 
 reset-reset_all = 모든 신체 비율 초기화
-reset-reset_all_warning =
-    <b>경고:</b> 이렇게 하면 지금까지 변경한 신체 비율 설정이 사라지고 설정했던 키를 기반으로 초기화돼요.
-    계속하시겠어요?
+reset-reset_all_warning-v2 =
+    <b>경고:</b> 기존에 설정한 신체 비율이 키에 비례하여 재설정됩니다.
+    그래도 진행하시겠습니까?
 reset-reset_all_warning-reset = 신체 비율 초기화
 reset-reset_all_warning-cancel = 취소
+reset-reset_all_warning_default-v2 =
+    <b>경고:</b> 사용자의 키가 설정되지 않았으므로 키를 비롯한 신체 비율이 기본값으로 재설정됩니다.
+    그래도 진행하시겠습니까?
 reset-full = 전체 정렬
 reset-mounting = 착용 방향 정렬
 reset-yaw = Yaw 정렬
@@ -204,6 +234,7 @@ tracker-infos-url = 트래커 URL
 tracker-infos-version = 펌웨어 버전
 tracker-infos-hardware_rev = 하드웨어 리비전
 tracker-infos-hardware_identifier = 하드웨어 ID
+tracker-infos-data_support = 데이터 지원
 tracker-infos-imu = IMU 센서
 tracker-infos-board_type = 메인보드
 tracker-infos-network_version = 프로토콜 버전
@@ -244,6 +275,11 @@ tracker-settings-name_section-label = 트래커 이름
 tracker-settings-forget = 트래커 삭제
 tracker-settings-forget-description = SlimeVR 서버에서 트래커를 제거하고 서버를 다시 시작할 때까지 자동으로 연결하지 않아요. 트래커의 설정은 지워지지 않아요.
 tracker-settings-forget-label = 트래커 삭제
+tracker-settings-update-unavailable = 업데이트할 수 없음 (DIY)
+tracker-settings-update-up_to_date = 최신 버전
+tracker-settings-update-available = { $versionName } 사용 가능
+tracker-settings-update = 지금 업데이트
+tracker-settings-update-title = 펌웨어 버전
 
 ## Tracker part card info
 
@@ -319,6 +355,7 @@ settings-sidebar-utils = 유틸리티
 settings-sidebar-serial = 시리얼 콘솔
 settings-sidebar-appearance = 모양
 settings-sidebar-notifications = 알림
+settings-sidebar-firmware-tool = DIY 펌웨어 도구
 settings-sidebar-advanced = 고급
 
 ## SteamVR settings
@@ -422,6 +459,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = 풋 플랜트는
 settings-general-fk_settings-leg_fk = 발 트래킹
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = 까치발을 들어 발 트래커의 착용 방향 정렬을 활성화하기
 settings-general-fk_settings-leg_fk-reset_mounting_feet = 발 트래커 착용 방향 정렬
+settings-general-fk_settings-enforce_joint_constraints = 골격 한계
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = 상수 강제 적용
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = 관절의 회전 각도를 제한합니다
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = 상수를 사용해 보정
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = 관절이 최대 회전 각도를 넘어 회전 시 관절의 회전 각도를 보정합니다
 settings-general-fk_settings-arm_fk = 팔 트래킹
 settings-general-fk_settings-arm_fk-description = 손 컨트롤러 위치 데이터를 사용할 수 없는 경우에도 VR 헤드셋(HMD)으로부터 팔을 추적하도록 할 수 있어요.
 settings-general-fk_settings-arm_fk-force_arms = 팔을 HMD에서만 받아오기
@@ -453,9 +495,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = 무
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = 무릎 각도를 계산할 때 발목 각도를 합산
 settings-general-fk_settings-self_localization-title = Mocap 모드
 settings-general-fk_settings-self_localization-description = Mocap 모드에서는 헤드셋이나 다른 트래커 없이 골격이 자신의 위치를 대략적으로 추적할 수 있어요. 발과 머리 트래커가 필요하고 아직 실험적이에요.
-settings-general-fk_settings-vive_emulation-title = VIVE 에뮬레이션
-settings-general-fk_settings-vive_emulation-description = 바이브 트래커가 가지고 있는 허리 트래커 문제를 따라해보세요! 사실 이건 장난이고 추적을 더 악화시켜요.
-settings-general-fk_settings-vive_emulation-label = VIVE 에뮬레이션 활성화
 
 ## Gesture control settings (tracker tapping)
 
@@ -487,9 +526,6 @@ settings-general-gesture_control-numberTrackersOverThreshold-description = 몸
 ## Appearance settings
 
 settings-interface-appearance = 모양
-settings-general-interface-dev_mode = 개발자 모드
-settings-general-interface-dev_mode-description = 이 모드는 더 많은 데이터가 필요하거나 고급 수준에서 연결된 트래커와 상호 작용하는 경우에 유용할 수 있어요.
-settings-general-interface-dev_mode-label = 개발자 모드
 settings-general-interface-theme = 컬러 테마
 settings-general-interface-show-navbar-onboarding = 내비게이션 바에 "{ navbar-onboarding }" 표시
 settings-general-interface-show-navbar-onboarding-description = 이 설정은 내비게이션 바에 "{ navbar-onboarding }" 버튼을 표시할 지 결정해요.
@@ -522,6 +558,12 @@ settings-general-interface-feedback_sound-volume = 피드백 사운드 음량
 settings-general-interface-connected_trackers_warning = 작동 중인 트래커 경고
 settings-general-interface-connected_trackers_warning-description = 이 옵션은 트래커가 연결되어 있는 채로 SlimeVR을 종료하려고 할 때 팝업을 표시합니다. 그렇게 하면 실수로 트래커를 끄지 않아 배터리가 방전되는 일을 예방할 수 있어요.
 settings-general-interface-connected_trackers_warning-label = 종료 시 작동 중인 트래커 경고 활성화
+
+## Behavior settings
+
+settings-general-interface-dev_mode = 개발자 모드
+settings-general-interface-dev_mode-description = 이 모드는 더 많은 데이터가 필요하거나 고급 수준에서 연결된 트래커와 상호 작용하는 경우에 유용할 수 있어요.
+settings-general-interface-dev_mode-label = 개발자 모드
 settings-general-interface-use_tray = 작업 표시줄로 최소화
 settings-general-interface-use_tray-description = SlimeVR 서버를 닫지 않고 창만 닫을 수 있게 하여 사용 시 항상 GUI를 띄워 놓을 필요가 없게 해요.
 settings-general-interface-use_tray-label = 작업 표시줄로 최소화
@@ -533,6 +575,8 @@ settings-general-interface-discord_presence-message =
         [0] 슬라임 갖고 노는 중
        *[other] 트래커 { $amount } 개 사용 중
     }
+settings-interface-behavior-error_tracking = Sentry.io 를 통한 오류 수집
+settings-interface-behavior-error_tracking-label = 개발자에게 오류 보내기
 
 ## Serial settings
 
@@ -594,6 +638,13 @@ settings-osc-vrchat-description-v1 =
 settings-osc-vrchat-enable = 활성화
 settings-osc-vrchat-enable-description = 데이터 송/수신 활성화
 settings-osc-vrchat-enable-label = 활성화
+settings-osc-vrchat-oscqueryEnabled = OSCQuery 활성화
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery는 실행 중인 VRChat 인스턴스를 자동으로 탐지한 후 데이터를 전송합니다.
+    또한 HMD와 컨트롤러 정보를 받아오기 위해 신호를 발송할 수도 있습니다.
+    VRChat으로부터 HMD와 컨트롤러 정보를 받아오려면, 메인 메뉴 설정에서
+    "Tracking & IK" 메뉴 아래 "Allow Sending Head and Wrist VR Tracking OSC Data" 옵션을 활성화해 주세요.
+settings-osc-vrchat-oscqueryEnabled-label = OSCQuery 활성화
 settings-osc-vrchat-network = 네트워크 포트
 settings-osc-vrchat-network-description-v1 = 들어오는 포트와 나가는 포트 설정하기, VRChat에서 사용하려면 그냥 두세요.
 settings-osc-vrchat-network-port_in =
@@ -636,12 +687,7 @@ settings-osc-vmc-network-address-description = 데이터를 받을 VMC 클라이
 settings-osc-vmc-network-address-placeholder = IPV4 주소
 settings-osc-vmc-vrm = VRM 모델
 settings-osc-vmc-vrm-description = VRM 모델을 로드할 때 헤드 앵커를 허용하고 다른 애플리케이션과의 호환성을 높여줘요.
-settings-osc-vmc-vrm-model_unloaded = 로드된 모델이 없어요
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] 로드된 모델: { $name }
-       *[other] 제목이 없는 모델 로드됨
-    }
+settings-osc-vmc-vrm-untitled_model = 이름 없는 모델
 settings-osc-vmc-vrm-file_select = 모델을 <u>열거나,</u> 여기에 드래그&드롭하세요.
 settings-osc-vmc-anchor_hip = 골반에 앵커 설정
 settings-osc-vmc-anchor_hip-description = 추적을 엉덩이에 고정해요. 앉은 자세로 VTubing할 때 유용해요. 비활성화하는 경우 VRM 모델에서 가져와요.
@@ -670,9 +716,10 @@ settings-utils-advanced-reset_warning =
     }
 settings-utils-advanced-reset_warning-reset = 설정 초기화
 settings-utils-advanced-reset_warning-cancel = 취소
-settings-utils-advanced-open_data = 데이터 폴더 열기
-settings-utils-advanced-open_data-description = 설정 파일과 로그 파일이 들어 있는 SlimeVR의 데이터 폴더를 파일 탐색기에서 엽니다.
+settings-utils-advanced-open_data-v1 = 설정 폴더
 settings-utils-advanced-open_data-label = 폴더 열기
+settings-utils-advanced-open_logs = 로그 폴더
+settings-utils-advanced-open_logs-label = 폴더 열기
 
 ## Setup/onboarding menu
 
@@ -699,6 +746,7 @@ onboarding-wifi_creds-submit = 저장!
 onboarding-wifi_creds-ssid =
     .label = Wi-Fi 이름
     .placeholder = Wi-Fi 이름을 입력하세요
+onboarding-wifi_creds-ssid-required = Wi-Fi 이름을 입력하세요
 onboarding-wifi_creds-password =
     .label = 암호
     .placeholder = 암호를 입력하세요
@@ -756,6 +804,7 @@ onboarding-connect_tracker-issue-serial = 연결하는 데 문제가 생겼어
 onboarding-connect_tracker-usb = USB 트래커
 onboarding-connect_tracker-connection_status-none = 트래커 찾는 중
 onboarding-connect_tracker-connection_status-serial_init = 시리얼 디바이스에 연결 중
+onboarding-connect_tracker-connection_status-obtaining_mac_address = 트래커 MAC 주소를 가져오는 중
 onboarding-connect_tracker-connection_status-provisioning = Wi-Fi 자격 증명 전송 중
 onboarding-connect_tracker-connection_status-connecting = Wi-Fi 연결 시도 중
 onboarding-connect_tracker-connection_status-looking_for_server = 서버 찾는 중
@@ -942,37 +991,20 @@ onboarding-automatic_mounting-put_trackers_on-title = 트래커를 착용해주
 onboarding-automatic_mounting-put_trackers_on-description = 트래커의 착용 방향을 보정하기 위해 방금 할당한 트래커들을 사용할 거예요. 모든 트래커를 착용했다면 오른쪽 그림에서 각각의 트래커가 어떤 위치에 있는지 확인할 수 있어요.
 onboarding-automatic_mounting-put_trackers_on-next = 모든 트래커를 착용했어요
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = 신체 비율을 설정하기 위해 어떤 방법을 사용할래요?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    신체 비율은 사용자의 신체 치수를 추산하기 위해 사용됩니다. 계산된 신체 치수는 트래커의 위치를 계산하는 데 사용됩니다.
-    설정된 신체 비율과 실제 신체 비율이 다를 경우, 트래킹 정확도가 훨씬 낮아질 수 있으며 사용 중 스케이팅, 슬라이딩, 또는 아바타와 신체 동작이 일치하지 않게 되는 경우가 발생할 수 있어요.
-    <b>신체 비율 측정은 한 번이면 충분해요!</b> 측정치가 부정확하거나 신체 비율이 달라진 경우를 제외하고는 다시 측정할 필요가 없어요.
-onboarding-choose_proportions-auto_proportions = 자동으로 비율 설정
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = 권장
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    몸을 이리저리 움직여 샘플을 기록한 다음 알고리즘을 통해 연산하는 방식으로 신체 비율을 추산합니다.
-    <b>사용하기 위해서는 VR 헤드셋이 SlimeVR과 연결되어 있어야 해요</b>
-onboarding-choose_proportions-manual_proportions = 수동으로 비율 설정
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = 정밀하게 설정하고 싶다면
-onboarding-choose_proportions-manual_proportions-description = 이 옵션을 사용하면 신체 비율을 직접 입력해 수동으로 조절할 수 있어요.
-onboarding-choose_proportions-export = 다른 이름으로 저장
-onboarding-choose_proportions-import = 신체 비율 가져오기
-onboarding-choose_proportions-import-success = 가져오기 완료
-onboarding-choose_proportions-import-failed = 가져오기 실패
-onboarding-choose_proportions-file_type = 신체 비율 파일
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = 정렬 튜토리얼로 돌아가기
 onboarding-manual_proportions-title = 수동 신체 비율 설정
 onboarding-manual_proportions-precision = 자세히 조절하기
 onboarding-manual_proportions-auto = 자동 신체 비율 설정
 onboarding-manual_proportions-ratio = 비율 그룹으로 조절하기
+onboarding-manual_proportions-fine_tuning_button = 신체 비율을 자동으로 조정
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = 신체 비율 자동 조정 기능을 이용하려면 VR 헤드셋을 연결해 주세요
+onboarding-manual_proportions-export = 신체 비율 내보내기
+onboarding-manual_proportions-import = 신체 비율 가져오기
+onboarding-manual_proportions-import-success = 가져오기 완료
+onboarding-manual_proportions-import-failed = 가져오기 실패
+onboarding-manual_proportions-file_type = 신체 비율 파일
 
 ## Tracker automatic proportions setup
 
@@ -993,21 +1025,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     SlimeVR 서버에 연결된 트래커와 VR 헤드셋이 끊김이나 렉 없이 제대로 표시되는지 확인하세요. (이것은 SteamVR이 실행 중이며 SlimeVR의 SteamVR 드라이버를 사용하여 SlimeVR에 올바르게 연결되어 있다는 것을 의미합니다)
     트래커가 제대로 작동하고 나의 움직임을 올바르게 반영중인지 확인하세요. (예: 전체 정렬을 수행했으며 발차기, 허리 숙이기, 앉기 등 올바른 방향으로 움직임)
 onboarding-automatic_proportions-requirements-next = 요구사항을 모두 읽었어요
-onboarding-automatic_proportions-check_height-title = 키를 확인하세요
-onboarding-automatic_proportions-check_height-description = 이 과정에서는 VR 헤드셋(HMD)의 높이를 사용하여 실제 키의 대략적인 값으로 삼고, 이를 측정의 기준으로 활용합니다. 하지만 직접 확인하는 것이 더 정확해요!
+onboarding-automatic_proportions-check_height-title-v3 = 헤드셋 높이 측정
+onboarding-automatic_proportions-check_height-description-v2 = 헤드셋(HMD)은 눈 높이에 위치해 있으므로 감지된 높이는 실제 키보다 살짝 작을 것입니다. 이 측정치는 사용자의 신체 비율을 추산하기 위한 기준값으로 이용됩니다.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = 버튼을 누른 후 3초 이내에 <u>바르게 서서</u> 키를 측정해 주세요!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = 키를 측정하기 위해 <u>똑바로 선 채</u>로 측정을 시작히세요. 측정에 영향을 줄 수 있으므로, 손을 헤드셋보다 높이 올리지 않게 주의하세요!
 onboarding-automatic_proportions-check_height-guardian_tip =
     독립형 VR 헤드셋을 사용하는 경우, 꼭 보호자와 함께하셔야 하고
     높이가 정확하도록 플레이 영역을 설정하는 것을 잊지 말아주세요!
-onboarding-automatic_proportions-check_height-fetch_height = 서 있어요!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = 알 수 없음
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = VR 헤드셋(HMD) 높이
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = 실제 키
+onboarding-automatic_proportions-check_height-hmd_height2 = 측정된 헤드셋 높이:
+onboarding-automatic_proportions-check_height-measure-start = 측정 시작
+onboarding-automatic_proportions-check_height-measure-stop = 측정 중지
+onboarding-automatic_proportions-check_height-measure-reset = 측정 재시도
 onboarding-automatic_proportions-check_height-next_step = 괜찮아 보여요
+onboarding-automatic_proportions-check_floor_height-title = 바닥 높이 측정 (선택)
+onboarding-automatic_proportions-check_floor_height-description = 경우에 따라 헤드셋이 바닥 높이를 올바르게 감지하지 못하여 실제보다 헤드셋 높이가 더 크게 측정될 수 있습니다. 헤드셋을 이용해 바닥의 "높이"를 측정하여 이에 따른 오차를 보정할 수 있습니다.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = 측정을 시작하고 바닥의 높이를 측정하기 위해 컨트롤러 하나를 바닥에 놓아주세요. 바닥 높이가 정확하다면 건너뛰셔도 좋습니다.
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = 측정된 바닥 높이:
+onboarding-automatic_proportions-check_floor_height-full_height = 추산된 키:
+onboarding-automatic_proportions-check_floor_height-measure-start = 측정 시작
+onboarding-automatic_proportions-check_floor_height-measure-stop = 측정 중지
+onboarding-automatic_proportions-check_floor_height-measure-reset = 측정 재시도
+onboarding-automatic_proportions-check_floor_height-skip_step = 건너뛰고 저장하기
+onboarding-automatic_proportions-check_floor_height-next_step = 바닥 높이를 사용하고 저장하기
 onboarding-automatic_proportions-start_recording-title = 움직일 준비를 해요
 onboarding-automatic_proportions-start_recording-description = 이제 몇 가지 특정 포즈와 동작을 기록할 거예요. 다음 화면에서 메시지가 표시되면 버튼을 눌러서 시작하세요!
 onboarding-automatic_proportions-start_recording-next = 기록 시작하기
@@ -1041,6 +1085,28 @@ onboarding-automatic_proportions-error_modal-v2 =
     이는 착용 방향 정렬 문제일 수 있어요. 다시 시도하기 전에 추적이 제대로 작동하는지 확인해보세요.
      <docs>설명서</docs>를 읽어보거나 <discord>Discord 서버</discord>에 가입해서 도와달라고 해 보세요! ^_^
 onboarding-automatic_proportions-error_modal-confirm = 이해했어요!
+onboarding-automatic_proportions-smol_warning =
+    당신의 설정된 키({ $height })는 프로그램이 허용하는 최소 키({ $minHeight })보다 작습니다.
+    <b>측정을 다시 수행하고 측정값들이 올바른지 확인해 주세요.</b>
+onboarding-automatic_proportions-smol_warning-cancel = 돌아가기
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = 키를 사용하여 추산한 신체 비율
+onboarding-scaled_proportions-description = SlimeVR 트래커들이 작동하기 위해서는 사용자의 뼈 길이를 알아야 합니다. 이 옵션은 뼈 길이를 측정된 키에 비례하는 평균치로 설정합니다.
+onboarding-scaled_proportions-manual_height-title = 키 설정하기
+onboarding-scaled_proportions-manual_height-description-v2 = 설정된 키는 신체 비율의 기준치로 사용됩니다.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR이 SlimeVR에 연결되어 있지 않으므로 헤드셋을 이용해 값을 측정할 수 있어요. <b>위험을 감수하고 계속 진행하거나, 사용 설명서 및 도움말을 참조하세요!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = 사용자의 키:
+onboarding-scaled_proportions-manual_height-estimated_height = 사용자의 추산된 헤드셋 높이:
+onboarding-scaled_proportions-manual_height-next_step = 계속하고 저장하기
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = 신체 비율 초기화
+onboarding-scaled_proportions-reset_proportion-description = 키에 따라 신체 비율을 설정하려면, 현재 설정된 신체 비율을 모두 초기화해야 합니다. 이 작업은 기존에 설정된 신체 비율을 초기화하고 신체 비율을 기본 설정으로 되돌립니다.
+onboarding-scaled_proportions-done-title = 신체 비율 설정됨
+onboarding-scaled_proportions-done-description = 이제 사용자의 키에 비례한 신체 비율이 사용됩니다.
 
 ## Home
 
@@ -1064,6 +1130,149 @@ status_system-StatusSteamVRDisconnected =
 status_system-StatusTrackerError = { $trackerName } 트래커에 문제가 발생했어요.
 status_system-StatusUnassignedHMD = VR 헤드셋은 머리 트래커로 할당되어야 해요.
 
+## Firmware tool globals
+
+firmware_tool-next_step = 다음 단계
+firmware_tool-previous_step = 이전 단계
+firmware_tool-ok = 좋아요
+firmware_tool-retry = 재시도
+firmware_tool-loading = 로딩 중...
+
+## Firmware tool Steps
+
+firmware_tool = DIY 펌웨어 도구
+firmware_tool-description = DIY 트래커를 설정하고 펌웨어를 쓸 수 있습니다
+firmware_tool-not_available = 앗, 지금은 펌웨어 툴을 사용할 수 없어요. 나중에 다시 오세요!
+firmware_tool-not_compatible = 이 서버 버전은 펌웨어 도구를 지원하지 않습니다. 서버를 업데이트해 주세요!
+firmware_tool-board_step = 보드 선택
+firmware_tool-board_step-description = 아래의 보드 중 하나를 선택해 주세요.
+firmware_tool-board_pins_step = 핀 확인
+firmware_tool-board_pins_step-description =
+    설정된 핀이 정확한지 다시 확인해 주세요.
+    SlimeVR 사용 설명서를 따랐다면 기본값으로도 문제 없을 거에요
+firmware_tool-board_pins_step-enable_led = LED 켜기
+firmware_tool-board_pins_step-led_pin =
+    .label = LED 핀
+    .placeholder = LED가 연결된 핀 번호를 입력해 주세요
+firmware_tool-board_pins_step-battery_type = 배터리 유형 선택
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = 외부 배터리
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = 내부 배터리
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = 내장 MCP3021
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = 배터리 센서 핀
+    .placeholder = 배터리 센서의 핀 번호를 입력해 주세요
+firmware_tool-board_pins_step-battery_resistor =
+    .label = 배터리 저항 (옴)
+    .placeholder = 배터리 저항의 값을 입력해 주세요
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = 배터리 쉴드 R1(옴)
+    .placeholder = 배터리 쉴드 R1 저항값을 입력해 주세요
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = 배터리 쉴드 R2(옴)
+    .placeholder = 배터리 쉴드 R2 저항값을 입력해 주세요
+firmware_tool-add_imus_step = IMU 설정
+firmware_tool-add_imus_step-description =
+    트래커가 사용하는 IMU들을 추가해 주세요
+    SlimeVR 사용 설명서를 따랐다면 기본값으로도 문제 없을 거에요
+firmware_tool-add_imus_step-imu_type-label = IMU 유형
+firmware_tool-add_imus_step-imu_type-placeholder = IMU 유형을 선택해 주세요
+firmware_tool-add_imus_step-imu_rotation =
+    .label = IMU 회전각 (도)
+    .placeholder = IMU의 회전각
+firmware_tool-add_imus_step-scl_pin =
+    .label = SCL 핀
+    .placeholder = SCL 핀의 번호
+firmware_tool-add_imus_step-sda_pin =
+    .label = SDA 핀
+    .placeholder = SDA 핀의 번호
+firmware_tool-add_imus_step-int_pin =
+    .label = INT 핀
+    .placeholder = INT 핀의 번호
+firmware_tool-add_imus_step-optional_tracker =
+    .label = 추가 트래커
+firmware_tool-add_imus_step-show_less = 간단하게
+firmware_tool-add_imus_step-show_more = 자세하게
+firmware_tool-add_imus_step-add_more = 더 많은 IMU 추가
+firmware_tool-select_firmware_step = 펌웨어 버전 선택
+firmware_tool-select_firmware_step-description = 사용하고자 하는 펌웨어 버전을 선택해 주세요
+firmware_tool-select_firmware_step-show-third-party =
+    .label = 제 3자 펌웨어 표시하기
+firmware_tool-flash_method_step = 펌웨어 플래시 방식
+firmware_tool-flash_method_step-description = 펌웨어를 트래커에 플래시할 방법을 선택해 주세요
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Wi-Fi를 이용하여 무선으로 트래커의 펌웨어를 업데이트합니다. 이미 설정을 완료한 트래커들에만 사용할 수 있어요.
+firmware_tool-flash_method_step-serial =
+    .label = Serial
+    .description = USB 케이블을 이용하여 트래커를 업데이트합니다.
+firmware_tool-flashbtn_step = BOOT 버튼 누르기
+firmware_tool-flashbtn_step-description = 다음 단계로 진행하기 전 몇 가지 작업을 해야 해요
+firmware_tool-flashbtn_step-board_SLIMEVR = 트래커를 끄고, 케이스를 제거하고 (만약 있다면), 이 컴퓨터에 USB 케이블을 연결한 후 SlimeVR 보드 버전에 따라 해당하는 작업을 수행해 주세요:
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = 보드 상단 가장자리에 위치한 두 번째 직사각형 FLASH 패드와 MCU의 금속 덮개를 단락시키며 트래커 전원을 켜기
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = 보드 상단에 위치한 원형 FLASH 패드와 MCU의 금속 덮개를 단락시키며 트래커 전원을 켜기
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = 보드 상단의 FLASH 버튼을 누른 채로 트래커 전원을 켜기
+firmware_tool-flashbtn_step-board_OTHER =
+    펌웨어를 쓰기 전에 트래커를 부트로더 모드에 진입시켜야 해요.
+    대부분의 경우 이는 펌웨어 쓰기 작업이 시작되기 전 보드에 있는 BOOT 버튼을 누르면 가능합니다.
+    펌웨어 쓰기 작업 초반에 시간 초과가 발생한다면 트래커가 부트로더 모드에 진입하지 않아서일 확률이 높아요.
+    트래커를 부트로더 모드로 진입시키는 방법은 가지고 계신 보드의 펌웨어 쓰기 도움말을 참고해 주세요
+firmware_tool-flash_method_ota-devices = 감지된 OTA 장치:
+firmware_tool-flash_method_ota-no_devices = OTA를 이용하여 업데이트할 수 있는 보드가 없습니다. 올바른 보드 버전을 선택했는지 확인해 주세요
+firmware_tool-flash_method_serial-wifi = Wi-Fi 이름과 비밀번호:
+firmware_tool-flash_method_serial-devices-label = 감지된 Serial 장치:
+firmware_tool-flash_method_serial-devices-placeholder = Serial 장치 선택
+firmware_tool-flash_method_serial-no_devices = 호환되는 Serial 장치가 감지되지 않았습니다. 트래커와 컴퓨터가 연결되어 있는지 확인해 주세요
+firmware_tool-build_step = 빌드 중
+firmware_tool-build_step-description = 펌웨어를 빌드하는 중입니다. 잠시만 기다려 주세요
+firmware_tool-flashing_step = 펌웨어 쓰는 중
+firmware_tool-flashing_step-description = 트래커에 펌웨어를 쓰는 중입니다. 화면의 지시를 따라 주세요
+firmware_tool-flashing_step-warning = 별도의 지시가 없는 경우, 트래커를 선에서 분리하거나 업로드 중 전원을 끄지 말아 주세요. 트래커를 사용하지 못 하게 될 수도 있습니다
+firmware_tool-flashing_step-flash_more = 더 많은 트래커에 펌웨어 쓰기
+firmware_tool-flashing_step-exit = 나가기
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = 빌드 폴더 만드는 중
+firmware_tool-build-DOWNLOADING_FIRMWARE = 펌웨어 다운로드 중
+firmware_tool-build-EXTRACTING_FIRMWARE = 펌웨어 추출 중
+firmware_tool-build-SETTING_UP_DEFINES = 매크로 상수 정의하는 중
+firmware_tool-build-BUILDING = 펌웨어 빌드 중
+firmware_tool-build-SAVING = 빌드 저장 중
+firmware_tool-build-DONE = 빌드 완료
+firmware_tool-build-ERROR = 펌웨어를 빌드할 수 없음
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = 펌웨어 다운로드 중
+firmware_update-status-NEED_MANUAL_REBOOT = 트래커의 전원을 껐다 켜 주세요
+firmware_update-status-AUTHENTICATING = MCU와 연결 시도 중
+firmware_update-status-UPLOADING = 펌웨어 업로드 중
+firmware_update-status-SYNCING_WITH_MCU = MCU와 동기화 중
+firmware_update-status-REBOOTING = 업데이트 적용 중
+firmware_update-status-PROVISIONING = Wi-Fi 자격 증명 설정 중
+firmware_update-status-DONE = 업데이트 완료!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = 장치를 찾을 수 없음
+firmware_update-status-ERROR_TIMEOUT = 업데이트 시간 초과
+firmware_update-status-ERROR_DOWNLOAD_FAILED = 펌웨어를 다운로드할 수 없음
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = MCU와 연결할 수 없음
+firmware_update-status-ERROR_UPLOAD_FAILED = 펌웨어를 업로드할 수 없음
+firmware_update-status-ERROR_PROVISIONING_FAILED = Wi-Fi 자격 증명을 설정할 수 없음
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = 업데이트 방법이 지원되지 않음
+firmware_update-status-ERROR_UNKNOWN = 알 수 없는 오류
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = 펌웨어 업데이트
+firmware_update-devices = 사용 가능한 장치
+firmware_update-devices-description = 최신 버전의 SlimeVR 펌웨어로 업데이트하려는 트래커들을 선택하십시오.
+firmware_update-no_devices = 업데이트하고자 하는 트래커들의 전원이 켜져 있고, Wi-Fi에 연결되어 있는지 확인해 주세요!
+firmware_update-changelog-title = { $version }으로 업데이트 중
+firmware_update-looking_for_devices = 업데이트할 장치들 찾는 중
+firmware_update-retry = 재시도
+firmware_update-update = 선택된 트래커들 업데이트
+firmware_update-exit = 나가기
+
 ## Tray Menu
 
 tray_menu-show = 열기
@@ -1091,3 +1300,8 @@ unknown_device-modal-description =
     SlimeVR에 연결할까요?
 unknown_device-modal-confirm = 당연하죠!
 unknown_device-modal-forget = 무시할게요
+
+## Error collection consent modal
+
+error_collection_modal-title = 오류를 수집해도 될까요?
+error_collection_modal-confirm = 동의해요

gui/public/i18n/lt/translation.ftl

@@ -0,0 +1,694 @@
+# Please developers (not translators) don't reuse a key inside another key
+# or concat text with a translation string in the code, use the appropriate
+# features like variables and selectors in each appropriate case!
+# And also comment the string if it's something not easy to translate, so you help
+# translators on what it means
+
+
+## Websocket (server) status
+
+websocket-connecting = Įkeliama...
+websocket-connection_lost = Įvyko techninė klaida!
+websocket-connection_lost-desc = Panašu, kad įvyko techninė klaida SlimeVR serveryje. Patikrinkite log'us ir bandykite jį perkrauti.
+websocket-timedout = Nepavyko susisiekti su serveriu
+websocket-timedout-desc = Panašu, kad SlimeVR serveris užstrigo. Patikrinkite log'us ir bandykite jį perkrauti.
+websocket-error-close = Uždaryti SlimeVR
+websocket-error-logs = Atidaryti log'ų aplanką
+
+## Update notification
+
+version_update-title = Yra nauja versija: { $version }
+version_update-description = Paspaudus „{ version_update-update }“, bus atsiųstas SlimeVR diegiklis.
+version_update-update = Atnaujinti
+version_update-close = Atmesti
+
+## Tips
+
+tips-find_tracker = Neaiškų, kuris sekiklis yra kuris? Pakratykite vieną - atitinkamas elementas bus paryškintas.
+tips-do_not_move_heels = Įrašymo metu pasirūpinkite, kad kulnai nejudėtų!
+tips-file_select = Tempkite failus čia, arba <u>pasirinkite</u> rankiniu būdu.
+tips-tap_setup = Vietoj pasirinkimo iš meniu, galite du kartus švelniai bakstelėti sekiklį, kad jį pasirinkti.
+tips-turn_on_tracker = Naudojate oficialius SlimeVR sekiklius? Nepamirškite <b><em>įjungti juos</em></b> po prijungimo prie kompiuterio!
+tips-failed_webgl = Įvyko techninė klaida inicijuojant WebGL.
+
+## Body parts
+
+body_part-NONE = Nepriskirta
+body_part-HEAD = Galva
+body_part-NECK = Kaklas
+body_part-RIGHT_SHOULDER = Dešinysis petys
+body_part-RIGHT_UPPER_ARM = Dešinysis žastas
+body_part-RIGHT_LOWER_ARM = Dešinysis dilbis
+body_part-RIGHT_HAND = Dešinioji ranka
+body_part-RIGHT_UPPER_LEG = Dešinioji šlaunis
+body_part-RIGHT_LOWER_LEG = Dešinioji blauzda
+body_part-RIGHT_FOOT = Dešinioji pėda
+body_part-UPPER_CHEST = Viršutinė krūtinės dalis
+body_part-CHEST = Krūtinė
+body_part-WAIST = Liemuo
+body_part-HIP = Klubai
+body_part-LEFT_SHOULDER = Kairysis petys
+body_part-LEFT_UPPER_ARM = Kairysis žastas
+body_part-LEFT_LOWER_ARM = Kairysis dilbis
+body_part-LEFT_HAND = Kairioji ranka
+body_part-LEFT_UPPER_LEG = Kairioji šlaunis
+body_part-LEFT_LOWER_LEG = Kairioji blauzda
+body_part-LEFT_FOOT = Kairioji pėda
+body_part-LEFT_THUMB_METACARPAL = Kairiojo nykščio delnakaulis
+body_part-LEFT_THUMB_PROXIMAL = Kairiojo nykščio artimoji dalis
+body_part-LEFT_THUMB_DISTAL = Kairiojo nykščio tolimiausioji dalis
+body_part-LEFT_INDEX_PROXIMAL = Kairiojo smiliaus artimoji dalis
+body_part-LEFT_INDEX_INTERMEDIATE = Kairiojo smiliaus vidurinė dalis
+body_part-LEFT_INDEX_DISTAL = Kairiojo smiliaus tolimiausioji dalis
+body_part-LEFT_MIDDLE_PROXIMAL = Kairiojo didžiojo piršto artimoji dalis
+body_part-LEFT_MIDDLE_INTERMEDIATE = Kairiojo didžiojo piršto vidurinė dalis
+body_part-LEFT_MIDDLE_DISTAL = Kairiojo didžiojo piršto tolimiausioji dalis
+body_part-LEFT_RING_PROXIMAL = Kairiojo bevardžio piršto artimoji dalis
+body_part-LEFT_RING_INTERMEDIATE = Kairiojo bevardžio piršto vidurinė dalis
+body_part-LEFT_RING_DISTAL = Kairiojo bevardžio piršto tolimiausioji dalis
+body_part-LEFT_LITTLE_PROXIMAL = Kairiojo mažylio artimoji dalis
+body_part-LEFT_LITTLE_INTERMEDIATE = Kairiojo mažylio vidurinė dalis
+body_part-LEFT_LITTLE_DISTAL = Kairiojo mažylio tolimiausioji dalis
+body_part-RIGHT_THUMB_METACARPAL = Dešiniojo nykščio delnakaulis
+body_part-RIGHT_THUMB_PROXIMAL = Dešiniojo nykščio artimoji dalis
+body_part-RIGHT_THUMB_DISTAL = Dešiniojo nykščio tolimiausioji dalis
+body_part-RIGHT_INDEX_PROXIMAL = Dešiniojo smiliaus artimoji dalis
+body_part-RIGHT_INDEX_INTERMEDIATE = Dešiniojo smiliaus vidurinė dalis
+body_part-RIGHT_INDEX_DISTAL = Dešiniojo smiliaus tolimiausioji dalis
+body_part-RIGHT_MIDDLE_PROXIMAL = Dešinioji didžiojo piršto artimoji dalis
+body_part-RIGHT_MIDDLE_INTERMEDIATE = Dešinioji didžiojo piršto vidurinė dalis
+body_part-RIGHT_MIDDLE_DISTAL = Dešinioji didžiojo piršto tolimiausioji dalis
+body_part-RIGHT_RING_PROXIMAL = Dešiniojo bevardžio piršto artimoji dalis
+body_part-RIGHT_RING_INTERMEDIATE = Dešiniojo bevardžio piršto vidurinė dalis
+body_part-RIGHT_RING_DISTAL = Dešiniojo bevardžio piršto tolimiausioji dalis
+body_part-RIGHT_LITTLE_PROXIMAL = Dešiniojo mažylio artimoji dalis
+body_part-RIGHT_LITTLE_INTERMEDIATE = Dešiniojo mažylio vidurinė dalis
+body_part-RIGHT_LITTLE_DISTAL = Dešiniojo mažylio tolimiausioji dalis
+
+## BoardType
+
+board_type-UNKNOWN = Nežinoma
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Nestandartinė plokštė
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = „Wrangler“ Joycon'ai
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU Glove
+
+## Proportions
+
+skeleton_bone-NONE = Nenurodyta
+skeleton_bone-HEAD = Galvos poslinkis
+skeleton_bone-HEAD-desc =
+    Tai atstumas nuo jūsų VR akinių iki galvos centro.
+    Norėdami tinkamai nustatyti, sukite galvą į kairę ir dešinę, tarsi nesutinkate, ir koreguokite,
+    kol judesys kituose sekikliuose taps minimalus.
+skeleton_bone-NECK = Kaklo ilgis
+skeleton_bone-NECK-desc =
+    Tai atstumas nuo galvos centro iki kaklo pagrindo.
+    Norėdami tinkamai nustatyti, linktelėkite galvą aukštyn ir žemyn, arba palenkite
+    galvą į kairę ir dešinę ir koreguokite, kol judesys kituose sekikliuose taps minimalus
+skeleton_bone-torso_group = Liemens ilgis
+skeleton_bone-torso_group-desc =
+    Tai atstumas nuo kaklo pagrindo iki klubų.
+    Norėdami tinkamai nustatyti, stovėkite tiesiai ir koreguokite, kol
+    virtualūs klubai sutaps su jūsų realiaisiais.
+skeleton_bone-UPPER_CHEST = Viršutinės krūtinės ilgis
+skeleton_bone-UPPER_CHEST-desc =
+    Tai atstumas nuo kaklo pagrindo iki krūtinės vidurio.
+    Pirmiausiai tinkamai nustatykite liemens ilgį, tada koreguokite įvairiose padėtyse
+    (sėdint, pasilenkiant, gulint), kol virtualus stuburas tiksliai sutaps su realiuoju.
+skeleton_bone-CHEST_OFFSET = Krūtinės poslinkis
+skeleton_bone-CHEST_OFFSET-desc =
+    Koreguokite tai, jei reikia perkelti virtualų krūtinės sekiklį aukštyn ar žemyn, kad pagerinti
+    kalibravimą tam tikruose žaidimuose ar programose, kurios tikisi sekiklį matyti aukščiau ar žemiau.
+skeleton_bone-CHEST = Krūtinės ilgis
+skeleton_bone-CHEST-desc =
+    Tai atstumas nuo krūtinės vidurio iki stuburo centro.
+    Pirmiausiai tinkamai nustatykite liemens ilgį, tada koreguokite įvairiose padėtyse
+    (sėdint, pasilenkiant, gulint), kol virtualus stuburas tiksliai sutaps su realiuoju.
+skeleton_bone-WAIST = Juosmens ilgis
+skeleton_bone-WAIST-desc =
+    Tai atstumas nuo stuburo centro iki bambos.
+    Pirmiausiai tinkamai nustatykite liemens ilgį, tada koreguokite įvairiose padėtyse
+    (sėdint, pasilenkiant, gulint), kol virtualus stuburas tiksliai sutaps su realiuoju.
+skeleton_bone-HIP = Klubų ilgis
+skeleton_bone-HIP-desc =
+    Tai atstumas nuo bambos iki klubų.
+    Pirmiausiai tinkamai nustatykite liemens ilgį, tada koreguokite įvairiose padėtyse
+    (sėdint, pasilenkiant, gulint), kol virtualus stuburas tiksliai sutaps su realiuoju.
+skeleton_bone-HIP_OFFSET = Klubų poslinkis
+skeleton_bone-HIP_OFFSET-desc =
+    Koreguokite tai, jei reikia perkelti virtualų klubų sekiklį aukštyn ar žemyn, kad pagerinti
+    kalibravimą tam tikruose žaidimuose ar programose, kurios tikisi sekiklį matyti liemens lygyje.
+skeleton_bone-HIPS_WIDTH = Klubų plotis
+skeleton_bone-HIPS_WIDTH-desc =
+    Tai atstumas tarp jūsų kojų pradžios taškų.
+    Norėdami tinkamai nustatyti, atlikite pilną atstatymą tiesiomis kojomis ir koreguokite,
+    kol virtualios kojos horizontaliai sutaps su realiosiomis.
+skeleton_bone-leg_group = Kojų ilgis
+skeleton_bone-leg_group-desc =
+    Tai atstumas tarp klubų iki pėdų.
+    Pirmiausiai tinkamai nustatykite liemens ilgį, tada koreguokite,
+    kol virtualios pėdos bus tame pačiame aukštyje kaip jūsų realiosios.
+skeleton_bone-UPPER_LEG = Šlaunies ilgis
+skeleton_bone-UPPER_LEG-desc =
+    Tai atstumas tarp klubų iki kelių.
+    Pirmiausiai tinkamai nustatykite kojų ilgį, tada koreguokite,
+    kol virtualūs keliai bus tame pačiame aukštyje kaip jūsų realieji.
+skeleton_bone-LOWER_LEG = Blauzdos ilgis
+skeleton_bone-FOOT_LENGTH = Pėdos ilgis
+skeleton_bone-FOOT_LENGTH-desc =
+    Tai atstumas nuo kulkšnių iki kojų pirštų.
+    Norėdami tinkamai nustatyti, atsistokite ant pirštų galų ir koreguokite, kol
+    virtualios pėdos stabiliai laikysis vietoje.
+skeleton_bone-FOOT_SHIFT = Pėdos poslinkis
+skeleton_bone-SKELETON_OFFSET = Skeletinė kompensacija
+skeleton_bone-SHOULDERS_DISTANCE = Pečių atstumas
+skeleton_bone-SHOULDERS_WIDTH = Pečių plotis
+skeleton_bone-arm_group = Rankų ilgis
+skeleton_bone-UPPER_ARM = Žasto ilgis
+skeleton_bone-LOWER_ARM = Dilbio ilgis
+skeleton_bone-HAND_Y = Rankos atstumas Y
+skeleton_bone-HAND_Z = Rankos atstumas Z
+skeleton_bone-ELBOW_OFFSET = Alkūnės poslinkis
+
+## Tracker reset buttons
+
+reset-reset_all = Atstatyti visas proporcijas
+reset-reset_all_warning-v2 =
+    <b>Dėmesio:</b> Jūsų proporcijos bus atstatytos į numatytąsias, pritaikytas pagal jūsų nustatytą ūgį.
+    Ar tikrai norite tai padaryti?
+reset-reset_all_warning-reset = Atstatyti proporcijas
+reset-reset_all_warning-cancel = Atšaukti
+reset-reset_all_warning_default-v2 =
+    <b>Dėmesio:</b> Jūs nenustatėte ūgio, todėl proporcijos bus atstatytos pagal numatytąjį ūgį.
+    Ar tikrai norite tai padaryti?
+reset-full = Pilnas atstatymas
+reset-mounting = Tvirtinimo pozicijų atstatymas
+reset-yaw = Horizontalus atstatymas
+
+## Serial detection stuff
+
+serial_detection-new_device-p0 = Aptiktas naujas serijinis įrenginys!
+serial_detection-new_device-p1 = Įveskite savo „Wi-Fi“ prisijungimo duomenis!
+serial_detection-new_device-p2 = Pasirinkite, ką norite su juo daryti
+serial_detection-open_wifi = Prijungti prie „Wi-Fi“
+serial_detection-open_serial = Atidaryti serijinę konsolę
+serial_detection-submit = Patvirtinti!
+serial_detection-close = Uždaryti
+
+## Navigation bar
+
+navbar-home = Pradžia
+navbar-body_proportions = Kūno proporcijos
+navbar-trackers_assign = Sekiklių priskyrimas
+navbar-mounting = Tvirtinimo kalibravimas
+navbar-onboarding = Sąrankos vedlys
+navbar-settings = Nustatymai
+
+## Biovision hierarchy recording
+
+bvh-start_recording = Įrašyti BVH
+bvh-recording = Įrašoma...
+
+## Tracking pause
+
+tracking-unpaused = Pristabdyti sekimą
+tracking-paused = Tęsti sekimą
+
+## Widget: Overlay settings
+
+widget-overlay = Perdanga
+widget-overlay-is_visible_label = Rodyti perdangą SteamVR'e
+widget-overlay-is_mirrored_label = Rodyti perdangą kaip veidrodį
+
+## Widget: Drift compensation
+
+widget-drift_compensation-clear = Išvalyti dreifo kompensavimą
+
+## Widget: Clear Reset Mounting
+
+widget-clear_mounting = Išvalyti tvirtinimo atstatymą
+
+## Widget: Developer settings
+
+widget-developer_mode = Kūrėjo režimas
+widget-developer_mode-high_contrast = Didelis kontrastas
+widget-developer_mode-precise_rotation = Tiksli rotacija
+widget-developer_mode-fast_data_feed = Greitas duomenų perdavimas
+widget-developer_mode-filter_slimes_and_hmd = Filtruoti Slime ir HMD įrenginius
+widget-developer_mode-sort_by_name = Rikiuoti pagal pavadinimą
+widget-developer_mode-raw_slime_rotation = Neapdorota rotacija
+widget-developer_mode-more_info = Daugiau informacijos
+
+## Widget: IMU Visualizer
+
+widget-imu_visualizer = Sekimo duomenys
+widget-imu_visualizer-preview = Peržiūra
+widget-imu_visualizer-hide = Slėpti
+widget-imu_visualizer-rotation_raw = Neapdorota rotacija
+widget-imu_visualizer-rotation_preview = Rotacijos peržiūra
+widget-imu_visualizer-acceleration = Akceleracija
+widget-imu_visualizer-position = Pozicija
+
+## Widget: Skeleton Visualizer
+
+widget-skeleton_visualizer-preview = Skeleto peržiūra
+widget-skeleton_visualizer-hide = Slėpti
+
+## Tracker status
+
+tracker-status-none = Nėra būsenos
+tracker-status-busy = Užimtas
+tracker-status-error = Klaida
+tracker-status-disconnected = Atjungtas
+tracker-status-occluded = Užblokuotas
+tracker-status-ok = Veikiantis
+tracker-status-timed_out = Nebepasiekiamas
+
+## Tracker status columns
+
+tracker-table-column-name = Pavadinimas
+tracker-table-column-type = Tipas
+tracker-table-column-battery = Baterija
+tracker-table-column-ping = Ping
+tracker-table-column-tps = TPS
+tracker-table-column-temperature = Temp. °C
+tracker-table-column-linear-acceleration = Akcel. X/Y/Z
+tracker-table-column-rotation = Rotacija X/Y/Z
+tracker-table-column-position = Pozicija X/Y/Z
+tracker-table-column-url = URL
+
+## Tracker rotation
+
+tracker-rotation-front = Priekyje
+tracker-rotation-front_left = Priekyje kairėje
+tracker-rotation-front_right = Priekyje dešinėje
+tracker-rotation-left = Kairėje
+tracker-rotation-right = Dešinėje
+tracker-rotation-back = Gale
+tracker-rotation-back_left = Gale kairėje
+tracker-rotation-back_right = Gale dešinėje
+tracker-rotation-custom = Pasirinktinis
+tracker-rotation-overriden = (perstatyta pagal tvirtinimo atstatymą)
+
+## Tracker information
+
+tracker-infos-manufacturer = Gamintojas
+tracker-infos-display_name = Rodomas pavadinimas
+tracker-infos-custom_name = Pasirinktinis pavadinimas
+tracker-infos-url = Sekiklio URL
+tracker-infos-version = Programinės įrangos versija
+tracker-infos-hardware_rev = Įrenginio revizija
+tracker-infos-hardware_identifier = Įrenginio ID
+tracker-infos-data_support = Duomenų palaikymas
+tracker-infos-imu = IMU jutiklis
+tracker-infos-board_type = Pagrindinė plokštė
+tracker-infos-network_version = Protokolo versija
+tracker-infos-magnetometer = Magnetometras
+tracker-infos-magnetometer-status-v1 =
+    { $status ->
+        [DISABLED] Išjungtas
+        [ENABLED] Įjungtas
+       *[NOT_SUPPORTED] Nepalaikomas
+    }
+
+## Tracker settings
+
+tracker-settings-back = Grįžti į sekiklio sąrašą
+tracker-settings-title = Sekiklio nustatymai
+tracker-settings-assignment_section = Priskyrimas
+tracker-settings-assignment_section-description = Kūno dalis, kuriai priskirtas sekiklis.
+tracker-settings-assignment_section-edit = Keisti priskyrimą
+tracker-settings-mounting_section = Tvirtinimo kryptis
+tracker-settings-mounting_section-description = Kur sekiklis yra tvirtinamas?
+tracker-settings-mounting_section-edit = Keisti tvirtinimą
+tracker-settings-drift_compensation_section = Leisti dreifo kompensavimo naudojimą
+tracker-settings-drift_compensation_section-description = Ar šis sekiklis turėtų kompensuoti dreifą, kai dreifo kompensavimas įjungtas?
+tracker-settings-drift_compensation_section-edit = Leisti dreifo kompensavimo naudojimą
+tracker-settings-use_mag = Leisti sekiklio magnetometro naudojimą
+# Multiline!
+tracker-settings-use_mag-description =
+    Ar šis sekiklis turėtų naudoti magnetometrą dreifui sumažinti, kai įjungtas jo naudojimas? <b>Neišjunkite sekiklio keisdami šį nustatymą!</b>
+    
+    Pirmiausia reikia įjungti magnetometro naudojimą, <magSetting>spustelėkite čia, kad pereiti prie nustatymo.</magSetting>
+tracker-settings-use_mag-label = Leisti magnetometro naudojimą
+# The .<name> means it's an attribute and it's related to the top key.
+# In this case that is the settings for the assignment section.
+tracker-settings-name_section = Sekiklio pavadinimas
+tracker-settings-name_section-description = Sugalvokite jam mielą vardą :)
+tracker-settings-name_section-placeholder = NightyBeast kairė koja
+tracker-settings-name_section-label = Sekiklio pavadinimas
+tracker-settings-forget = Pamiršti sekiklį
+tracker-settings-forget-description = Tai pašalins sekiklį iš SlimeVR serverio ir nebeleis jam prisijungti, kol neperkrausite serverį. Sekiklio nustatymai nebus prarasti.
+tracker-settings-forget-label = Pamiršti sekiklį
+tracker-settings-update-unavailable = Neįmanoma atnaujinti (DIY)
+tracker-settings-update-low-battery = Negalima atnaujinti, baterijos lygis žemesnis nei 50%
+tracker-settings-update-up_to_date = Atnaujinta
+tracker-settings-update-available = Prieinamas atnaujinimas: { $versionName }
+tracker-settings-update = Atnaujinti dabar
+tracker-settings-update-title = Programinės įrangos versija
+
+## Tracker part card info
+
+tracker-part_card-no_name = Be pavadinimo
+tracker-part_card-unassigned = Nepriskirtas
+
+## Body assignment menu
+
+body_assignment_menu = Kur norite priskirti šį sekiklį?
+body_assignment_menu-description = Pasirinkite kūno vietą, į kurią priskirti šį sekikli. Taip pat galite valdyti visus sekiklius vienu metu, o ne po vieną.
+body_assignment_menu-show_advanced_locations = Rodyti išplėstines priskyrimo vietas
+body_assignment_menu-manage_trackers = Tvarkyti visus sekiklius
+body_assignment_menu-unassign_tracker = Išvalyti sekiklio priskyrimą
+
+## Tracker assignment menu
+
+# A -translation_key (with a dash in the front) means that it's a label.
+# It can only be used in the translation file, it's nice for reusing names and that kind of stuff.
+#
+# We are using it here because english doesn't require changing the text in each case but
+# maybe your language does.
+-tracker_selection-part = Kurį sekiklį norite priskirti prie jūsų
+tracker_selection_menu-NONE = Kuro sekiklio priskyrimą norite išvalyti?
+tracker_selection_menu-HEAD = { -tracker_selection-part } galvos?
+tracker_selection_menu-NECK = { -tracker_selection-part } kaklo?
+tracker_selection_menu-RIGHT_SHOULDER = { -tracker_selection-part } dešinio peties?
+tracker_selection_menu-RIGHT_UPPER_ARM = { -tracker_selection-part } dešinio žasto?
+tracker_selection_menu-RIGHT_LOWER_ARM = { -tracker_selection-part } dešinio dilbio?
+tracker_selection_menu-RIGHT_HAND = { -tracker_selection-part } dešinės rankos?
+tracker_selection_menu-RIGHT_UPPER_LEG = { -tracker_selection-part } dešiniosios šlaunies?
+tracker_selection_menu-RIGHT_LOWER_LEG = { -tracker_selection-part } dešiniosios blauzdos?
+tracker_selection_menu-RIGHT_FOOT = { -tracker_selection-part } dešinės pėdos?
+tracker_selection_menu-RIGHT_CONTROLLER = { -tracker_selection-part } dešinio kontrolerio?
+tracker_selection_menu-UPPER_CHEST = { -tracker_selection-part } viršutinės krūtinės dalies?
+tracker_selection_menu-CHEST = { -tracker_selection-part } krūtinės?
+tracker_selection_menu-WAIST = { -tracker_selection-part } liemens?
+tracker_selection_menu-HIP = { -tracker_selection-part } klubų?
+tracker_selection_menu-LEFT_SHOULDER = { -tracker_selection-part } kairio peties?
+tracker_selection_menu-LEFT_UPPER_ARM = { -tracker_selection-part } kairio žasto?
+tracker_selection_menu-LEFT_LOWER_ARM = { -tracker_selection-part } kairio dilbio?
+tracker_selection_menu-LEFT_HAND = { -tracker_selection-part } kairės rankos?
+tracker_selection_menu-LEFT_UPPER_LEG = { -tracker_selection-part } kairiosios šlaunies?
+tracker_selection_menu-LEFT_LOWER_LEG = { -tracker_selection-part } kairiosios blauzdos?
+tracker_selection_menu-LEFT_FOOT = { -tracker_selection-part } kairės pėdos?
+tracker_selection_menu-LEFT_CONTROLLER = { -tracker_selection-part } kairio kontrolerio?
+tracker_selection_menu-unassigned = Nepriskirti sekikliai
+tracker_selection_menu-assigned = Priskirti sekikliai
+tracker_selection_menu-dont_assign = Išvalyti priskyrimą
+# This line cares about multilines.
+# <b>text</b> means that the text should be bold.
+tracker_selection_menu-neck_warning =
+    <b>Dėmesio:</b> Kaklo sekiklio naudojimas gali sutrikdyti kraujotaką į 
+    galvą ir būti mirtinai pavojingas, jei dirželis netinkamai sureguliuotas!
+tracker_selection_menu-neck_warning-done = Suprantu riziką
+tracker_selection_menu-neck_warning-cancel = Atšaukti
+
+## Mounting menu
+
+mounting_selection_menu = Kur norite tvirtinti šį sekiklį?
+mounting_selection_menu-close = Uždaryti
+
+## Sidebar settings
+
+settings-sidebar-title = Nustatymai
+settings-sidebar-general = Bendrieji
+settings-sidebar-tracker_mechanics = Sekiklių mechanika
+settings-sidebar-fk_settings = Sekimo nustatymai
+settings-sidebar-gesture_control = Valdymas gestais
+settings-sidebar-interface = Sąsaja
+settings-sidebar-osc_router = OSC maršrutizatorius
+settings-sidebar-osc_trackers = VRChat OSC sekikliai
+settings-sidebar-utils = Įrankiai
+settings-sidebar-serial = Serijinė konsolė
+settings-sidebar-appearance = Išvaizda
+settings-sidebar-notifications = Pranešimai
+settings-sidebar-behavior = Elgsena
+settings-sidebar-firmware-tool = DIY sekiklių programinės įrangos įrankis
+settings-sidebar-advanced = Išplėstiniai
+
+## SteamVR settings
+
+settings-general-steamvr = SteamVR
+settings-general-steamvr-subtitle = SteamVR sekikliai
+# Not all translation keys support multiline, only the ones that specify it will actually
+# split it in lines (that also means you can split in lines however you want in those).
+# The first spaces (not tabs) for indentation will be ignored, just to make the file look nice when writing.
+# This one is one of this cases that cares about multilines
+settings-general-steamvr-description =
+    Įjungti ar išjungti konkrečius SteamVR sekiklius.
+    Tai naudinga žaidimams ar programoms, kurios veikia tik su tam tikrais sekikliais.
+settings-general-steamvr-trackers-waist = Liemuo
+settings-general-steamvr-trackers-chest = Krūtinė
+settings-general-steamvr-trackers-left_foot = Kairė pėda
+settings-general-steamvr-trackers-right_foot = Dešinė pėda
+settings-general-steamvr-trackers-left_knee = Kairysis kelias
+settings-general-steamvr-trackers-right_knee = Dešinysis kelias
+settings-general-steamvr-trackers-left_elbow = Kairė alkūnė
+settings-general-steamvr-trackers-right_elbow = Dešinė alkūnė
+settings-general-steamvr-trackers-left_hand = Kairė ranka
+settings-general-steamvr-trackers-right_hand = Dešinė ranka
+settings-general-steamvr-trackers-tracker_toggling = Automatinis sekiklių perjungimas
+settings-general-steamvr-trackers-tracker_toggling-description = Automatiškai įjungs ar išjungs SteamVR sekiklius pagal jūsų sekiklių priskyrimą
+settings-general-steamvr-trackers-tracker_toggling-label = Automatinis sekiklių perjungimas
+settings-general-steamvr-trackers-hands-warning =
+    <b>Dėmesio:</b> rankų sekikliai atjungs jūsų kontrolerius.
+    Ar tikrai to norite?
+settings-general-steamvr-trackers-hands-warning-cancel = Atšaukti
+settings-general-steamvr-trackers-hands-warning-done = Taip
+
+## Tracker mechanics
+
+settings-general-tracker_mechanics = Sekiklių mechanika
+settings-general-tracker_mechanics-filtering = Filtravimas
+# This also cares about multilines
+settings-general-tracker_mechanics-filtering-description =
+    Pasirinkite filtravimo tipą.
+    Prognozavimas numato judesius, o švelninimas juos sušvelnina.
+settings-general-tracker_mechanics-filtering-type = Filtravimo tipas
+settings-general-tracker_mechanics-filtering-type-none = Be filtravimo
+settings-general-tracker_mechanics-filtering-type-none-description = Naudoja judesius be jokio filtravimo.
+settings-general-tracker_mechanics-filtering-type-smoothing = Švelninimas
+settings-general-tracker_mechanics-filtering-type-smoothing-description = Sušvelnina judesius, bet prideda sekimo vėlavimą.
+settings-general-tracker_mechanics-filtering-type-prediction = Prognozavimas
+settings-general-tracker_mechanics-filtering-type-prediction-description = Sumažina sekimo vėlavimą, bet gali padidinti sekimo drebėjimą.
+settings-general-tracker_mechanics-filtering-amount = Filtravimo stiprumas
+settings-general-tracker_mechanics-yaw-reset-smooth-time = Horizontalaus atstatymo sušvelninimo laikas (0 s išjungs švelninimą)
+settings-general-tracker_mechanics-drift_compensation = Dreifo kompensavimas
+# This cares about multilines
+settings-general-tracker_mechanics-drift_compensation-description =
+    Kompensuoja IMU jutiklių dreifą taikant priešingą sukimąsi.
+    Galima keisti kompensavimo stiprumą, ir kiek atstatymų įtraukti į dreifo apskaičiavimą.
+    Naudokite tik jeigu jūsų sekikliams reikalinga labai dažnai atlikti atstatymus!
+settings-general-tracker_mechanics-drift_compensation-enabled-label = Dreifo kompensavimas
+settings-general-tracker_mechanics-drift_compensation-prediction = Dreifo kompensavimo prognozavimas
+# This cares about multilines
+settings-general-tracker_mechanics-drift_compensation-prediction-description =
+    Prognozuoja horizontalaus dreifo kompensavimą už jau pamatuoto intervalo ribų.
+    Įjunkite, jeigu jūsų sekikliai nuolat sukasi aplink vertikalią ašį.
+settings-general-tracker_mechanics-drift_compensation-prediction-label = Dreifo kompensavimo prognozavimas
+settings-general-tracker_mechanics-drift_compensation_warning =
+    <b>Dėmesio:</b> Dreifo kompensavimo naudokite tik jeigu jūsų
+    sekikliams reikalinga labai dažnai atlikti atstatymus (kas 5, 10 min.).
+    
+    Kai kurie sekikliai, linkę į dažną atstatymą:
+    Joycon'ai, owoTrack, ir MPU IMU jutikliai be naujos programinės įrangos
+settings-general-tracker_mechanics-drift_compensation_warning-cancel = Atšaukti
+settings-general-tracker_mechanics-drift_compensation_warning-done = Suprantu
+settings-general-tracker_mechanics-drift_compensation-amount-label = Kompensavimo stiprumas
+settings-general-tracker_mechanics-drift_compensation-max_resets-label = Kiek paskutinių atstatymų naudoti, dreifo kompensavimo atstatymui
+settings-general-tracker_mechanics-save_mounting_reset = Išsaugoti automatinio tvirtinimo pozicijų kalibravimą
+settings-general-tracker_mechanics-save_mounting_reset-description =
+    Išsaugo sekiklių automatinio tvirtinimo pozicijų kalibravimą tarp paleidimų iš naujo. Tai yra naudinga,
+    jeigu naudojate sekimo aprangą, kuriame sekikliai nepajuda tarp sesijų. <b>Nerekomenduojama įprastiems naudotojams!</b>
+settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Išsaugoti tvirtinimo pozicijų atstatymą
+settings-general-tracker_mechanics-use_mag_on_all_trackers = Naudoti magnetometrą visuose IMU jutikliuose, kurie jį turi
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    Naudoja magnetometrą visuose sekikliuose, kurių programinė įrangą jį palaiko. Tai sumažiną dreifą jeigu magnetinė aplinka stabili.
+    Galima individualiai tai išjungti kiekvieno sekiklio nustatymuose. <b>Neišjunkite sekiklių keisdami šį nustatymą!</b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Naudoti magnetometrą sekikliuose
+
+## FK/Tracking settings
+
+settings-general-fk_settings = Sekimo nustatymai
+# Floor clip:
+# why the name - came from the idea of noclip in video games, but is the opposite where clipping to the floor is a desired feature
+# definition - Prevents the foot trackers from going lower than they where when a reset was performed
+settings-general-fk_settings-leg_tweak-floor_clip = Rėmimas prie grindų
+# Skating correction:
+# why the name - without this enabled the feet will often slide across the ground as if your skating across the ground,
+# since this largely prevents this it corrects for it hence skating correction (note this may be renamed to sliding correction)
+# definition - Guesses when each foot is in contact with the ground and uses that information to improve tracking
+settings-general-fk_settings-leg_tweak-skating_correction = Slydimo korekcija
+settings-general-fk_settings-leg_tweak-toe_snap = Pėdų pasukimo spėjimas
+settings-general-fk_settings-leg_tweak-foot_plant = Pėdos prispaudimas
+settings-general-fk_settings-leg_tweak-skating_correction-amount = Slydimo korekcijos stiprumas
+settings-general-fk_settings-leg_tweak-skating_correction-description = Koreguoja pėdų čiuožimo efektą. Gali sumažinti tikslumą kai kurių judesių metru. Įjungus - atlikite pilną atstatymą, ir kalibraciją žaidime.
+settings-general-fk_settings-leg_tweak-floor_clip-description = Neleidžia pėdoms prasiskverbti pro grindis. Įjungus - atlikite pilną atstatymą, ir kalibraciją žaidime.
+settings-general-fk_settings-leg_tweak-toe_snap-description = Bando atspėti pėdų pasukimą, jei nenaudojate pėdų sekiklius.
+settings-general-fk_settings-leg_tweak-foot_plant-description = Pasuka pėdas taip, kad jos būtų lygiagrečios grindims, kai stovite.
+settings-general-fk_settings-leg_fk = Kojų sekimas
+settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Įjungia pėdų tvirtinimo atstatymą atsistojant ant pirštų galų.
+settings-general-fk_settings-leg_fk-reset_mounting_feet = Pėdų tvirtinimo atstatymas
+settings-general-fk_settings-enforce_joint_constraints = Skeletiniai ribojimai
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Taikyti ribojimus
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Neleidžia sąnariams pasisukti už jų fiziologinės ribos.
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Taisyti pagal ribojimus
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Koreguoja sąnarių padėtis, kai jos viršija ribas
+settings-general-fk_settings-arm_fk = Rankų sekimas
+
+## Gesture control settings (tracker tapping)
+
+settings-general-gesture_control = Valdymas gestais
+settings-general-gesture_control-subtitle = Atstatymas bakstelėjant sekiklius
+settings-general-gesture_control-description = Leidžia atstatyti bakstelėjant sekiklį: aukščiausias krūtinės sekiklis yra naudojamas horizontaliam atstatymui; aukščiausias kairės kojos sekiklis pilnam atstatymui; o aukščiausias dešinės kojos - tvirtinimo pozicijų atstatymui. Bakstelėjimas turi būti atliktas per 0.3 sekundžių padauginus bakstelėjimų skaičiumi.
+# This is a unit: 3 taps, 2 taps, 1 tap
+# $amount (Number) - Amount of taps (touches to the tracker's case)
+settings-general-gesture_control-taps =
+    { $amount ->
+        [one] { $amount } bakstelėjimas
+        [few] { $amount } bakstelėjimai
+        [many] { $amount } bakstelėjimo
+       *[other] { $amount } bakstelėjimų
+    }
+# This is a unit: 3 trackers, 2 trackers, 1 tracker
+# $amount (Number) - Amount of trackers
+settings-general-gesture_control-trackers =
+    { $amount ->
+        [one] { $amount } sekiklis
+        [few] { $amount } sekikliai
+        [many] { $amount } sekiklio
+       *[other] { $amount } sekiklių
+    }
+
+## Appearance settings
+
+
+## Notification settings
+
+
+## Behavior settings
+
+
+## Serial settings
+
+
+## OSC router settings
+
+
+## OSC VRChat settings
+
+
+## VMC OSC settings
+
+
+## Advanced settings
+
+
+## Setup/onboarding menu
+
+
+## Wi-Fi setup
+
+
+## Mounting setup
+
+
+## Setup start
+
+
+## Enter VR part of setup
+
+
+## Setup done
+
+
+## Tracker connection setup
+
+
+## Tracker calibration tutorial
+
+
+## Tracker assignment tutorial
+
+
+## Tracker assignment setup
+
+
+## Tracker assignment warnings
+
+
+## Tracker mounting method choose
+
+
+## Tracker manual mounting setup
+
+
+## Tracker automatic mounting setup
+
+
+## Tracker manual proportions setupa
+
+
+## Tracker automatic proportions setup
+
+
+## Tracker scaled proportions setup
+
+
+## Tracker scaled proportions reset
+
+
+## Stay Aligned setup
+
+
+## Home
+
+
+## Trackers Still On notification
+
+
+## Status system
+
+
+## Firmware tool globals
+
+
+## Firmware tool Steps
+
+
+## firmware tool build status
+
+
+## Firmware update status
+
+
+## Dedicated Firmware Update Page
+
+
+## Tray Menu
+
+
+## First exit modal
+
+
+## Unknown device modal
+
+
+## Error collection consent modal
+
+error_collection_modal-confirm = Sutinku
+error_collection_modal-cancel = Nesutinku

gui/public/i18n/nb-NO/translation.ftl

@@ -1,6 +1,3 @@
-### SlimeVR complete GUI translations
-
-
 # Please developers (not translators) don't reuse a key inside another key
 # or concat text with a translation string in the code, use the appropriate
 # features like variables and selectors in each appropriate case!
@@ -10,13 +7,29 @@
 
 ## Websocket (server) status
 
-websocket-connecting = Kobler til serveren
+websocket-connecting = Laster...
 websocket-connection_lost = Mistet server-tilkobling. Vennligst vent mens koblingen gjenopprettes...
+websocket-connection_lost-desc = Det ser ut som at SlimeVR serveren har krasjet. Sjekk loggene og restart programmet.
+websocket-timedout = Klarte ikke å koble til serveren.
+websocket-timedout-desc = Det ser ut som at SlimeVR serveren har krasjet eller har brukt for lang til på å koble til. Sjekk loggene og restart programmet.
+websocket-error-close = Avslutt SlimeVR
+websocket-error-logs = Åpne opp "logs" mappen.
+
+## Update notification
+
+version_update-title = Ny versjon tilgjengelig: { $version }
+version_update-description = Å klikke "{ version_update-update }" laster ned SlimeVR installatøren for deg.
+version_update-update = Oppdater
+version_update-close = Lukk
 
 ## Tips
 
-tips-find_tracker = Vanskeligheter med å skille mellom dine trackere? Rist én for å finne fram riktig gjenstand.
-tips-do_not_move_heels = Vær obs på at helene dine står stille under innspillingen!
+tips-find_tracker = Usikker på hvilken tracker som er hvilken? Rist en av dem! Den ristede trackeren vil bli fremhevet.
+tips-do_not_move_heels = Sørg for at dine heler ikke beveger under opptaket!
+tips-file_select = Dra og slipp filene for å enten bruke eller <u>gå igjennom</u>.
+tips-tap_setup = Du kan forsiktig trykke på din tracker 2 ganger sammenhengende istedenfor å velge den fra menyen.
+tips-turn_on_tracker = Bruker du offisielle SlimeVR trackere? Husk å <b><em>skru dem på</em></b> etter å ha koblet dem til PCen din!
+tips-failed_webgl = Feil ved initialisering av WebGL.
 
 ## Body parts
 
@@ -25,31 +38,54 @@ body_part-HEAD = Hode
 body_part-NECK = Hals
 body_part-RIGHT_SHOULDER = Høyre skulder
 body_part-RIGHT_UPPER_ARM = Høyre overarm
-body_part-RIGHT_LOWER_ARM = Høyre nedre arm
+body_part-RIGHT_LOWER_ARM = Høyre underarm
 body_part-RIGHT_HAND = Høyre hånd
 body_part-RIGHT_UPPER_LEG = Høyre lår
 body_part-RIGHT_LOWER_LEG = Høyre ankel
 body_part-RIGHT_FOOT = Høyre fot
-body_part-RIGHT_CONTROLLER = Høyre kontroller
+body_part-UPPER_CHEST = Øvre bryst
 body_part-CHEST = Bryst
 body_part-WAIST = Midje
 body_part-HIP = Hofte
 body_part-LEFT_SHOULDER = Venstre skulder
 body_part-LEFT_UPPER_ARM = Venstre overarm
-body_part-LEFT_LOWER_ARM = Venstre nedre arm
+body_part-LEFT_LOWER_ARM = Venstre underarm
 body_part-LEFT_HAND = Venstre hånd
 body_part-LEFT_UPPER_LEG = Venstre lår
 body_part-LEFT_LOWER_LEG = Venstre ankel
 body_part-LEFT_FOOT = Venstre fot
-body_part-LEFT_CONTROLLER = Venstre kontroller
+body_part-LEFT_THUMB_METACARPAL = Venstre tommel mellomhånden
+body_part-LEFT_THUMB_PROXIMAL = Venstre tommel proksimal
+body_part-LEFT_THUMB_DISTAL = Venstre tommel lengst unna
+body_part-LEFT_INDEX_PROXIMAL = Venstre innerste pekefinger
+body_part-LEFT_INDEX_INTERMEDIATE = Venstre middels pekefinger
+body_part-LEFT_INDEX_DISTAL = Venstre yterste pekefinger
+body_part-LEFT_MIDDLE_PROXIMAL = Venstre innerste langfinger
+body_part-LEFT_MIDDLE_INTERMEDIATE = Venstre middels langfinger
+body_part-LEFT_MIDDLE_DISTAL = Venstre yterste langfinger
+body_part-LEFT_RING_PROXIMAL = Venstre innerste ring
+
+## BoardType
+
+board_type-UNKNOWN = Ukjent
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Egendefinert brett
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-SLIMEVR = SlimeVR
+board_type-OWOTRACK = owoTrack
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
 
 ## Proportions
 
 skeleton_bone-NONE = Ingen
 skeleton_bone-HEAD = Hode bytte
 skeleton_bone-NECK = Halslengde
-skeleton_bone-CHEST = Bryst-lengde
+skeleton_bone-torso_group = Torsolengde
 skeleton_bone-CHEST_OFFSET = Bryst-forskyvning
+skeleton_bone-CHEST = Bryst-lengde
 skeleton_bone-WAIST = Midje-lengde
 skeleton_bone-HIP = Hofte-lengde
 skeleton_bone-HIP_OFFSET = Hofte-forskyvning
@@ -63,16 +99,17 @@ skeleton_bone-SHOULDERS_DISTANCE = Skulder-distanse
 skeleton_bone-SHOULDERS_WIDTH = Skulder-bredde
 skeleton_bone-UPPER_ARM = Overarms-lengde
 skeleton_bone-LOWER_ARM = Nedre arm-lengde
-skeleton_bone-CONTROLLER_Y = Kontroller distanse Y
-skeleton_bone-CONTROLLER_Z = Kontroller distanse Z
 skeleton_bone-ELBOW_OFFSET = Albue-forskyvning
 
 ## Tracker reset buttons
 
 reset-reset_all = Nullstill alle proporsjoner
+reset-reset_all_warning-cancel = Avbryt
+reset-reset_all_warning_default-v2 =
+    <b>Advarsel:</b> Høyden din har ikke blitt konfigurert, proporsjonene dine vil bli tilbakestilt til standardinnstillingene med standardhøyden.
+    Er du sikker på at du vil gjøre dette?
 reset-full = Nullstill
 reset-mounting = Nullstill montering
-reset-quick = Rask nullstilling
 
 ## Serial detection stuff
 
@@ -93,17 +130,26 @@ navbar-mounting = Monterings kalibrering
 navbar-onboarding = Oppsetts veiviser
 navbar-settings = Innstillinger
 
-## Bounding volume hierarchy recording
+## Biovision hierarchy recording
 
 bvh-start_recording = BVH-innspilling
 bvh-recording = Spiller inn...
 
+## Tracking pause
+
+
 ## Widget: Overlay settings
 
 widget-overlay = Overlegg
 widget-overlay-is_visible_label = Vis overlegg i SteamVR
 widget-overlay-is_mirrored_label = Vis overlegg som speil
 
+## Widget: Drift compensation
+
+
+## Widget: Clear Reset Mounting
+
+
 ## Widget: Developer settings
 
 widget-developer_mode = Utvikler modus
@@ -121,6 +167,9 @@ widget-imu_visualizer = Rotasjon
 widget-imu_visualizer-rotation_raw = Rå
 widget-imu_visualizer-rotation_preview = Forhåndsvisning
 
+## Widget: Skeleton Visualizer
+
+
 ## Tracker status
 
 tracker-status-none = Ingen status
@@ -149,6 +198,7 @@ tracker-rotation-front = Front
 tracker-rotation-left = Venstre
 tracker-rotation-right = Høyre
 tracker-rotation-back = Bak
+tracker-rotation-custom = Egendefinert
 
 ## Tracker information
 
@@ -173,7 +223,7 @@ tracker-settings-drift_compensation_section-edit = Tillat avdrifts-kompensasjon
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = Tracker navn
-tracker-settings-name_section-description = Gi den et søtt kallenavn-navn :)
+tracker-settings-name_section-description = Gi den et søtt kallenavn :)
 tracker-settings-name_section-placeholder = ~Thͭiͪaͥsͣˢ~ venstre ben
 
 ## Tracker part card info
@@ -260,10 +310,7 @@ settings-general-steamvr-description =
     Nyttig for spill eller programmer som bare støtter visse trackere.
 settings-general-steamvr-trackers-waist = Midje
 settings-general-steamvr-trackers-chest = Bryst
-settings-general-steamvr-trackers-feet = Føtter
-settings-general-steamvr-trackers-knees = Knær
-settings-general-steamvr-trackers-elbows = Albuer
-settings-general-steamvr-trackers-hands = Hender
+settings-general-steamvr-trackers-hands-warning-cancel = Avbryt
 
 ## Tracker mechanics
 
@@ -287,14 +334,18 @@ settings-general-tracker_mechanics-drift_compensation-description =
     Kompenserer for IMU yaw avdrift ved å legge til en rotasjon av omvendt verdi.
     Endre mengde kompensasjon og opp til hvor mange nullstillinger som skal bli gjort rede for.
 settings-general-tracker_mechanics-drift_compensation-enabled-label = Avdrifts kompansering
+settings-general-tracker_mechanics-drift_compensation_warning-cancel = Avbryt
 settings-general-tracker_mechanics-drift_compensation-amount-label = Kompanserings mengde
 settings-general-tracker_mechanics-drift_compensation-max_resets-label = Bruk opp til x siste nullstillinger
+settings-general-tracker_mechanics-use_mag_on_all_trackers = Bruk magnetometer på alle IMU-trackere som støtter det
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    Bruker magnetometer på alle trackere som har en kompatibel firmware for det, noe som reduserer drift i stabile magnetiske områder.
+    Kan deaktiveres per tracker i trackerens innstillinger. <b>Ikke slå av noen av trackerne mens du endrer denne innstillingen !</b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Bruk magnetometer på trackere
 
 ## FK/Tracking settings
 
-settings-general-fk_settings = Sporings innstillinger
-settings-general-fk_settings-leg_tweak = Bein-justeringer
-settings-general-fk_settings-leg_tweak-description = Gulv-clip kan redusere, om ikke eliminere det at lemmer går gjennom gulvet, men kan skape problemer når du er på knærne. Skating-korreksjon jobber mot "ice-skating", men kan forverre presisjonen i visse bevegelsesmønster.
+settings-general-fk_settings = Tracking innstillinger
 # Floor clip:
 # why the name - came from the idea of noclip in video games, but is the opposite where clipping to the floor is a desired feature
 # definition - Prevents the foot trackers from going lower than they where when a reset was performed
@@ -308,14 +359,7 @@ settings-general-fk_settings-leg_tweak-skating_correction-amount = Skating-korre
 settings-general-fk_settings-arm_fk = Arm sporing
 settings-general-fk_settings-arm_fk-description = Endre metoden armene spores på.
 settings-general-fk_settings-arm_fk-force_arms = Tving armer fra HMD
-settings-general-fk_settings-skeleton_settings = Skjellet innstillinger
 settings-general-fk_settings-skeleton_settings-description = Skru skjellet innstillinger av eller på. Det anbefales å la disse stå på.
-settings-general-fk_settings-skeleton_settings-extended_spine = Forlenget ryggrad
-settings-general-fk_settings-skeleton_settings-extended_pelvis = Forlenget pelvis
-settings-general-fk_settings-skeleton_settings-extended_knees = Forlenget kne
-settings-general-fk_settings-vive_emulation-title = Vive emulasjon
-settings-general-fk_settings-vive_emulation-description = Emuler midjesporings problemene som Vive sporerene har. Dette er en vits og gjør sporingen verre.
-settings-general-fk_settings-vive_emulation-label = Aktiver Vive emulasjon
 
 ## Gesture control settings (tracker tapping)
 
@@ -329,29 +373,38 @@ settings-general-gesture_control-taps =
         [one] 1 trykk
        *[other] { $amount } trykk
     }
-settings-general-gesture_control-quickResetEnabled = Aktiver rask nullstilling ved trykk
-settings-general-gesture_control-quickResetDelay = Rask nullstillings utsettelse
-settings-general-gesture_control-quickResetTaps = Trykking for rask nullstilling
-settings-general-gesture_control-resetEnabled = Aktiver nullstilling ved trykking
-settings-general-gesture_control-resetDelay = Nullstillings utsettelse
-settings-general-gesture_control-resetTaps = Trykking for nullstilling
 settings-general-gesture_control-mountingResetEnabled = Aktiver monterings-nullstilling ved trykking
 settings-general-gesture_control-mountingResetDelay = Monterings-nullstilling utsettelse
 settings-general-gesture_control-mountingResetTaps = Trykking for monterings-nullstilling
 
-## Interface settings
+## Appearance settings
 
-settings-general-interface = Grensesnitt
 settings-general-interface-dev_mode = Utvikler modus
 settings-general-interface-dev_mode-description = Denne modusen kan være hjelpsom dersom du trenger data som gir mer innsyn eller for å samhandle med tilkoblede sporere på et mer avansert nivå.
 settings-general-interface-dev_mode-label = Utvikler modus
-settings-general-interface-serial_detection = Seriell enhets gjenkjenning
-settings-general-interface-serial_detection-description = Dette valget viser en pop-up for hver gang du kobler til en ny seriell-enhet som kunne vært en sporer. Dette forbedrer sporerens konfigureringsprosess.
-settings-general-interface-serial_detection-label = Seriell enhets gjenkjenning
 settings-general-interface-lang = Velg språk
 settings-general-interface-lang-description = Endre hovedspråket du vil bruke.
 settings-general-interface-lang-placeholder = Velg språket du vil bruke
 
+## Notification settings
+
+settings-general-interface-serial_detection = Seriell enhets gjenkjenning
+settings-general-interface-serial_detection-description = Dette valget viser en pop-up for hver gang du kobler til en ny seriell-enhet som kunne vært en sporer. Dette forbedrer sporerens konfigureringsprosess.
+settings-general-interface-serial_detection-label = Seriell enhets gjenkjenning
+
+## Behavior settings
+
+settings-general-interface-dev_mode = Utvikler modus
+settings-general-interface-dev_mode-description = Denne modusen kan være hjelpsom dersom du trenger data som gir mer innsyn eller for å samhandle med tilkoblede sporere på et mer avansert nivå.
+settings-general-interface-dev_mode-label = Utvikler modus
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Samtykker du til innsamling av anonymiserte feildata?</h1>
+    
+    <b>Vi samler ikke inn personlig informasjon</b> slik som din IP-adresse eller trådløs-legitimasjon. SlimeVR verdsetter ditt personvern!
+    
+    For å gi deg den beste brukeropplevelsen, samler vi inn anonymiserte feilrapporter, ytelsesmålinger og informasjon om operativsystemet. Dette hjelper oss med å oppdage feil og problemer med SlimeVR. Disse beregningene samles inn via Sentry.io.
+settings-interface-behavior-error_tracking-label = Send feilmeldinger til utviklere
+
 ## Serial settings
 
 settings-serial = Seriell konsoll
@@ -401,15 +454,10 @@ settings-osc-router-network-address-placeholder = IPV4 adresse
 ## OSC VRChat settings
 
 settings-osc-vrchat = VRChat OSC Trackere
-# This cares about multilines
-settings-osc-vrchat-description =
-    Juster på innstillinger spesifikt for VRChat for å motta HMD-data og sende
-    sporer-data for FBT (funker for Quest standalone).
 settings-osc-vrchat-enable = Aktiver
 settings-osc-vrchat-enable-description = Skru av/på utsending og mottakelse av data.
 settings-osc-vrchat-enable-label = Aktiver
 settings-osc-vrchat-network = Nettverks-porter
-settings-osc-vrchat-network-description = Still inn portene som skal motta og sende data til VRChat.
 settings-osc-vrchat-network-port_in =
     .label = Port Inn
     .placeholder = Port inn (normalverdi: 9001)
@@ -417,16 +465,21 @@ settings-osc-vrchat-network-port_out =
     .label = Port Ut
     .placeholder = Port ut (standardisering: 9000)
 settings-osc-vrchat-network-address = Nettverksadresse
-settings-osc-vrchat-network-address-description = Velg hvilken adresse som skal sende ut data til VRChat (sjekk Wi-Fi innstillingene på din enhet).
 settings-osc-vrchat-network-address-placeholder = VRChat ip adresse
 settings-osc-vrchat-network-trackers = Trackere
 settings-osc-vrchat-network-trackers-description = Skru av/på sendingen av spesifikke sporere via OSC.
 settings-osc-vrchat-network-trackers-chest = Bryst
-settings-osc-vrchat-network-trackers-waist = Midje
+settings-osc-vrchat-network-trackers-hip = Hofte
 settings-osc-vrchat-network-trackers-knees = Knær
 settings-osc-vrchat-network-trackers-feet = Føtter
 settings-osc-vrchat-network-trackers-elbows = Albuer
 
+## VMC OSC settings
+
+
+## Advanced settings
+
+
 ## Setup/onboarding menu
 
 onboarding-skip = Hopp over oppsett
@@ -454,15 +507,11 @@ onboarding-wifi_creds-password =
 
 onboarding-reset_tutorial-back = Gå tilbake til monterings kalibrering
 onboarding-reset_tutorial = Nullstill opplæringen
-onboarding-reset_tutorial-description = Denne funksjonen er ikke klar, bare trykk fortsett
+onboarding-reset_tutorial-skip = Hopp over trinn
 
 ## Setup start
 
 onboarding-home = Velkommen til SlimeVR
-# This cares about multilines and it's centered!!
-onboarding-home-description =
-    Muliggjør hel-kropps sporing
-    for alle
 onboarding-home-start = La oss sette i gang!
 
 ## Enter VR part of setup
@@ -482,15 +531,9 @@ onboarding-done-close = Lukk guiden
 
 onboarding-connect_tracker-back = Gå tilbake til Wi-Fi legitimasjon
 onboarding-connect_tracker-title = Koble til trackere
-onboarding-connect_tracker-description-p0 = Nå begynner den morsomme delen, å koble til alle trackerne!
-onboarding-connect_tracker-description-p1 = Ta og koble til alt som ikke er tilkoblet enda, via en USB port.
 onboarding-connect_tracker-issue-serial = Jeg sliter med å koble til!
 onboarding-connect_tracker-usb = USB Tracker
 onboarding-connect_tracker-connection_status-connecting = Sender Wi-Fi legitimasjon
-onboarding-connect_tracker-connection_status-connected = Koblet til Wi-Fi
-onboarding-connect_tracker-connection_status-error = Kunne ikke koble til Wi-Fi
-onboarding-connect_tracker-connection_status-start_connecting = Ser etter trackere
-onboarding-connect_tracker-connection_status-handshake = Koblet til Serveren
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -504,6 +547,12 @@ onboarding-connect_tracker-connected_trackers =
     }
 onboarding-connect_tracker-next = Jeg har tilkoblet alle mine trackere
 
+## Tracker calibration tutorial
+
+
+## Tracker assignment tutorial
+
+
 ## Tracker assignment setup
 
 onboarding-assign_trackers-back = Gå tilbake til Wi-Fi legitimasjon
@@ -520,6 +569,13 @@ onboarding-assign_trackers-assigned =
 onboarding-assign_trackers-advanced = Vis avanserte tildelings-plasseringer
 onboarding-assign_trackers-next = Jeg har tildelt alle trackerne
 
+## Tracker assignment warnings
+
+
+## Tracker mounting method choose
+
+onboarding-choose_mounting-manual_modal-cancel = Avbryt
+
 ## Tracker manual mounting setup
 
 onboarding-manual_mounting-back = Gå tilbake for å tre inn i VR
@@ -543,18 +599,14 @@ onboarding-automatic_mounting-mounting_reset-title = Monterings nullstilling
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Gjør knebøy som om du står på ski, bøyde knær, overkroppen rettet forover og armer bøyd.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Trykk på "Nullstill montering" knappen og vent 3 sekunder før trackernes monterings-rotasjon nullstilles.
 onboarding-automatic_mounting-preparation-title = Forberedning
-onboarding-automatic_mounting-preparation-step-0 = 1. Stå rett med armene til siden.
-onboarding-automatic_mounting-preparation-step-1 = 2. Trykk på "Nullstill" knappen og vent 3 sekunder før trackerne nullstilles.
 onboarding-automatic_mounting-put_trackers_on-title = Ta på deg dine trackere
 onboarding-automatic_mounting-put_trackers_on-description = For å kalibrere monterings-rotasjonene, må vi bruke trackerne du akkurat tildelte. Ta på deg alle dine trackere, du kan se hvem som er hvem i figuren til høyre.
 onboarding-automatic_mounting-put_trackers_on-next = Jeg har alle mine trackere på
 
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Gå tilbake til Nullstillings opplæring
 onboarding-manual_proportions-title = Manuelle kropps-proporsjoner
-onboarding-manual_proportions-precision = Presisjons justering
-onboarding-manual_proportions-auto = Automatisk kalibrering
 
 ## Tracker automatic proportions setup
 
@@ -566,22 +618,14 @@ onboarding-automatic_proportions-prev_step = Forrige steg
 onboarding-automatic_proportions-put_trackers_on-title = Ta på deg alle dine trackere
 onboarding-automatic_proportions-put_trackers_on-description = For å kalibrere dine proporsjoner, bruker vi trackerne du akkurat har tildelt. Ta på deg alle dine trackere, du kan se hvem som går hvor i figuren til høyre.
 onboarding-automatic_proportions-put_trackers_on-next = Jeg har alle mine trackere på
-onboarding-automatic_proportions-preparation-title = Forberedning
-onboarding-automatic_proportions-preparation-description = Plasser en stol rett bak deg innenfor ditt play space. Vær forberedt på å sette deg ned i løpet av autobein oppsettet.
-onboarding-automatic_proportions-preparation-next = Jeg er foran en stol
 onboarding-automatic_proportions-start_recording-title = Gjør deg klar til å bevege deg
 onboarding-automatic_proportions-start_recording-description = Vi kommer nå til å spille inn noen spesifikke poseringer og bevegelser. Disse vil bli vist i den neste skjermen. Gjør deg klar til å starte når du trykker på knappen!
 onboarding-automatic_proportions-start_recording-next = Start Innspilling
 onboarding-automatic_proportions-recording-title = REC
 onboarding-automatic_proportions-recording-description-p0 = Innspilling pågår...
 onboarding-automatic_proportions-recording-description-p1 = Utfør bevegelsene vist nedenfor:
-onboarding-automatic_proportions-recording-steps-0 = Bøy knærne noen få ganger.
-onboarding-automatic_proportions-recording-steps-1 = Sett deg i stolen, reis deg så opp.
-onboarding-automatic_proportions-recording-steps-2 = Vri overkroppen til venstre, så bøy til høyre.
-onboarding-automatic_proportions-recording-steps-3 = Vri overkroppen til høyre, så bøy til venstre.
-onboarding-automatic_proportions-recording-steps-4 = Rist på kroppen til tiden går ut.
 onboarding-automatic_proportions-recording-processing = Jobber med resultatet
-# $time (Number) - Seconds left for the automatic calibration recording to finish (max 15)
+# $time (Number) - Seconds left for the automatic calibration recording to finish (max 20)
 onboarding-automatic_proportions-recording-timer =
     { $time ->
         [one] 1 sekund igjen
@@ -596,6 +640,49 @@ onboarding-automatic_proportions-verify_results-confirm = De er riktige
 onboarding-automatic_proportions-done-title = Kropp målt og lagret.
 onboarding-automatic_proportions-done-description = Din kropps-proposisjons kalibrering er fullført!
 
+## Tracker scaled proportions setup
+
+
+## Tracker scaled proportions reset
+
+
+## Stay Aligned setup
+
+
 ## Home
 
 home-no_trackers = Ingen trackere oppdaget eller tildelt
+
+## Trackers Still On notification
+
+
+## Status system
+
+
+## Firmware tool globals
+
+
+## Firmware tool Steps
+
+
+## firmware tool build status
+
+
+## Firmware update status
+
+
+## Dedicated Firmware Update Page
+
+
+## Tray Menu
+
+
+## First exit modal
+
+tray_or_exit_modal-cancel = Avbryt
+
+## Unknown device modal
+
+
+## Error collection consent modal
+

gui/public/i18n/nl/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Verbinding maken met de server
 websocket-connection_lost = Verbinding met de server verbroken. Opniew verbinding maken...
+websocket-connection_lost-desc = Het ziet er naar uit dat de verbinding met de SlimeVR server is verbroken. Check het logboek en start het programma opnieuw.
+websocket-timedout = Kan niet verbinden met de server.
+websocket-timedout-desc = Het ziet er naar uit dat de SlimeVR server is gestopt. Check het logboek en start het programma opnieuw.
+websocket-error-close = SlimeVR afsluiten
+websocket-error-logs = Open het logboek.
 
 ## Update notification
 
@@ -49,40 +54,195 @@ body_part-LEFT_HAND = Linkerhand
 body_part-LEFT_UPPER_LEG = Linkerdij
 body_part-LEFT_LOWER_LEG = Linkerenkel
 body_part-LEFT_FOOT = Linkervoet
+body_part-LEFT_THUMB_METACARPAL = Linkerduim middenhandsbeentje
+body_part-LEFT_THUMB_PROXIMAL = Linkerduim proximaal
+body_part-LEFT_THUMB_DISTAL = Linkerduim distaal
+body_part-LEFT_INDEX_PROXIMAL = Linker wijsvinger proximaal
+body_part-LEFT_INDEX_INTERMEDIATE = Linker middelste kootje van de wijsvinger
+body_part-LEFT_INDEX_DISTAL = Linker wijsvinger distaal
+body_part-LEFT_MIDDLE_PROXIMAL = Linker middelvinger proximaal
+body_part-LEFT_MIDDLE_INTERMEDIATE = Linker middelste kootje van de middelvinger
+body_part-LEFT_MIDDLE_DISTAL = Linker middelvinger distaal
+body_part-LEFT_RING_PROXIMAL = Linker ringvinger proximaal
+body_part-LEFT_RING_INTERMEDIATE = Linker middelste kootje van de ringvinger
+body_part-LEFT_RING_DISTAL = Linker ringvinger distaal
+body_part-LEFT_LITTLE_PROXIMAL = Linker kleine vinger proximaal
+body_part-LEFT_LITTLE_INTERMEDIATE = Linker middelste kootje van de kleine vinger
+body_part-LEFT_LITTLE_DISTAL = Linker kleine vinger distaal
+body_part-RIGHT_THUMB_METACARPAL = Rechterduim middenhandsbeentje
+body_part-RIGHT_THUMB_PROXIMAL = Rechterduim proximaal
+body_part-RIGHT_THUMB_DISTAL = Rechterduim distaal
+body_part-RIGHT_INDEX_PROXIMAL = Rechter wijsvinger proximaal
+body_part-RIGHT_INDEX_INTERMEDIATE = Rechter middelste kootje van de wijsvinger
+body_part-RIGHT_INDEX_DISTAL = Rechter wijsvinger distaal
+body_part-RIGHT_MIDDLE_PROXIMAL = Rechts middelvinger proximaal
+body_part-RIGHT_MIDDLE_INTERMEDIATE = Rechter middelste kootje van de middelvinger
+body_part-RIGHT_MIDDLE_DISTAL = Rechter middelvinger distaal
+body_part-RIGHT_RING_PROXIMAL = Rechter ringvinger proximaal
+body_part-RIGHT_RING_INTERMEDIATE = Rechter middelste kootje van de ringvinger
+body_part-RIGHT_RING_DISTAL = Rechter ringvinger distaal
+body_part-RIGHT_LITTLE_PROXIMAL = Rechter kleine vinger proximaal
+body_part-RIGHT_LITTLE_INTERMEDIATE = Rechter middelste kootje van de kleine vinger
+body_part-RIGHT_LITTLE_DISTAL = Rechter kleine vinger distaal
+
+## BoardType
+
+board_type-UNKNOWN = Onbekend
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Custom bord
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU Handschoen
 
 ## Proportions
 
 skeleton_bone-NONE = Geen
 skeleton_bone-HEAD = Hoofdverschuiving
+skeleton_bone-HEAD-desc =
+    Dit is de afstand tussen je headset en het midden van je hoofd.
+    Om dit aan te passen, schud je je hoofd naar links en rechts alsof je 'nee' zegt, 
+    pas het aan totdat beweging van de andere trackers te verwaarlozen is.
 skeleton_bone-NECK = Neklengte
+skeleton_bone-NECK-desc =
+    Dit is de afstand tussen het midden van je hoofd en de basis van je nek.
+    Om dit aan te passen, beweeg je je hoofd op en neer alsof je knikt, of kantel je je hoofd 
+    naar links en rechts. Wijzig de positie totdat beweging in andere trackers verwaarloosbaar is.
 skeleton_bone-torso_group = Romp lengte
+skeleton_bone-torso_group-desc =
+    Dit is de afstand van je nek tot je heupen.
+    Om dit aan te passen, ga rechtop staan en pas het aan totdat je virtuele heupen
+    in lijn zijn met je echte heupen.
 skeleton_bone-UPPER_CHEST = Bovenborst Lengte
+skeleton_bone-UPPER_CHEST-desc =
+    Dit is de afstand tussen de basis van je nek en het midden van je borst.
+    Om dit aan te passen, stel je de torso-lengte correct af en pas je deze aan in verschillende houdingen 
+    (zitten, bukken, liggen, enz.) totdat je virtuele ruggengraat overeenkomt met je echte.
 skeleton_bone-CHEST_OFFSET = Borstoffset
+skeleton_bone-CHEST_OFFSET-desc =
+    Dit kan worden aangepast om je virtuele borsttracker omhoog of omlaag te verplaatsen,
+    om te helpen bij de kalibratie in bepaalde spellen of applicaties die verwachten dat deze hoger of lager staat.
 skeleton_bone-CHEST = Borstafstand
+skeleton_bone-CHEST-desc =
+    Dit is de afstand van het midden van je borst tot het midden van je ruggengraat.
+    Om dit aan te passen, stel je de torso-lengte correct af en pas je deze aan in verschillende houdingen 
+    (zitten, bukken, liggen, enz.) totdat je virtuele ruggengraat overeenkomt met je echte.
 skeleton_bone-WAIST = Taille lengte
+skeleton_bone-WAIST-desc =
+    Dit is de afstand van het midden van je ruggengraat tot je navel.
+    Om dit aan te passen, stel je de torso-lengte correct af en pas je deze aan in verschillende houdingen 
+    (zitten, bukken, liggen, enz.) totdat je virtuele ruggengraat overeenkomt met je echte.
 skeleton_bone-HIP = Heuplengte
+skeleton_bone-HIP-desc =
+    Dit is de afstand van je navel tot je heupen.
+    Om dit aan te passen, stel je de torso-lengte correct in en pas je deze aan in verschillende houdingen
+    (zitten, bukken, liggen, enz.) totdat je virtuele ruggengraat overeenkomt met je echte.
 skeleton_bone-HIP_OFFSET = Heupoffset
+skeleton_bone-HIP_OFFSET-desc =
+    Dit kan worden aangepast om je virtuele heuptracker omhoog of omlaag te verplaatsen,
+    om te helpen bij de kalibratie in bepaalde spellen of applicaties die mogelijk verwachten dat deze zich rond je middel bevindt.
 skeleton_bone-HIPS_WIDTH = Heupbreedte
+skeleton_bone-HIPS_WIDTH-desc =
+    Dit is de afstand tussen het begin van je benen.
+    Om dit aan te passen, voer je een volledige reset uit met je benen gestrekt en pas je het aan totdat je virtuele benen horizontaal overeenkomen met je echte.
 skeleton_bone-leg_group = Beenlengte
+skeleton_bone-leg_group-desc =
+    Dit is de afstand van je heupen tot je voeten.
+    Om dit aan te passen, pas je je torso-lengte op de juiste manier aan
+    totdat je virtuele voeten op hetzelfde niveau staan als je echte.
 skeleton_bone-UPPER_LEG = Bovenbeenlengte
+skeleton_bone-UPPER_LEG-desc =
+    Dit is de afstand van je heupen tot je knieën.
+    Om dit aan te passen, pas je je beenlengte op de juiste manier aan
+    totdat je virtuele knieën op dezelfde hoogte zijn als je echte.
 skeleton_bone-LOWER_LEG = Onderbeenlengte
+skeleton_bone-LOWER_LEG-desc =
+    Dit is de afstand van je knieën tot je enkels.
+    Om dit aan te passen, pas je je beenlengte op de juiste manier aan
+    totdat je virtuele knieën op dezelfde hoogte zijn als je echte knieën.
 skeleton_bone-FOOT_LENGTH = Voetlengte
+skeleton_bone-FOOT_LENGTH-desc =
+    Dit is de afstand van je enkels tot je tenen.
+    Om dit aan te passen, ga op je tenen staan en pas het aan totdat je virtuele voeten op hun plaats blijven.
 skeleton_bone-FOOT_SHIFT = Voetverschuiving
+skeleton_bone-FOOT_SHIFT-desc =
+    Deze waarde is de horizontale afstand van je knie tot je enkel.
+    Dit houdt rekening met het feit dat je onderbenen naar achteren staan wanneer je rechtop staat.
+    Om dit aan te passen, stel je de voetlengte in op 0, voer je een volledige reset uit,
+    en pas je het aan totdat je virtuele voeten op één lijn liggen met het midden van je enkels.
 skeleton_bone-SKELETON_OFFSET = Skelet offset
+skeleton_bone-SKELETON_OFFSET-desc =
+    Dit kan worden aangepast om al je trackers naar voren of naar achteren te verschuiven.
+    Het kan worden gebruikt om te helpen bij de kalibratie in bepaalde spellen of toepassingen
+    die mogelijk verwachten dat je trackers verder naar voren staan.
 skeleton_bone-SHOULDERS_DISTANCE = Schoudersafstand
+skeleton_bone-SHOULDERS_DISTANCE-desc =
+    Dit is de verticale afstand van de basis van je nek tot je schouders.
+    Om dit aan te passen, stel je de lengte van je bovenarm in op 0 en
+    pas je deze aan totdat je virtuele elleboogtrackers verticaal uitlijnen met je echte schouders.
 skeleton_bone-SHOULDERS_WIDTH = Schouderbreedte
+skeleton_bone-SHOULDERS_WIDTH-desc =
+    Dit is de horizontale afstand van de basis van je nek tot je schouders.
+    Om dit aan te passen, stel je de lengte van je bovenarm in op 0 en pas je deze aan
+    totdat je virtuele elleboogtrackers horizontaal uitlijnen met je echte schouders.
 skeleton_bone-arm_group = Armlengte
+skeleton_bone-arm_group-desc =
+    Dit is de afstand van je schouders tot je polsen.
+    Om dit aan te passen, pas je de schouderafstand correct aan, stel je Handafstand Y in op 0, 
+    en pas je deze aan totdat je handtrackers op één lijn liggen met je polsen.
 skeleton_bone-UPPER_ARM = Bovenarmlengte
+skeleton_bone-UPPER_ARM-desc =
+    Dit is de afstand van je schouders tot je ellebogen.
+    Om dit aan te passen, pas je de armlengte correct aan en pas je deze aan
+    totdat je elleboogtrackers overeenkomen met je echte ellebogen.
 skeleton_bone-LOWER_ARM = Onderarmlengte
+skeleton_bone-LOWER_ARM-desc =
+    Dit is de afstand van je ellebogen tot je polsen.
+    Om dit aan te passen, pas je de armlengte correct aan en pas je deze aan
+    totdat je elleboogtrackers overeenkomen met je echte ellebogen.
 skeleton_bone-HAND_Y = Afstand hand Y
+skeleton_bone-HAND_Y-desc =
+    Dit is de verticale afstand van je polsen tot het midden van je hand.
+    Om dit aan te passen voor motion capture, pas je de armlengte correct aan 
+    en pas je deze aan totdat je handtrackers verticaal uitgelijnd zijn met het midden van je handen. 
+    Wil je het aanpassen voor elleboogtracking vanaf je controllers, 
+    stel dan de armlengte in op 0 en pas je deze aan totdat je elleboogtrackers verticaal op één lijn liggen met je polsen.
 skeleton_bone-HAND_Z = Afstand hand Z
+skeleton_bone-HAND_Z-desc =
+    Dit is de horizontale afstand van je polsen tot het midden van je hand.
+    Als je dit wilt aanpassen voor motion capture, stel je deze in op 0.
+    Wil je het aanpassen voor elleboogtracking vanaf je controllers, stel dan de armlengte in op 0 
+    en pas je deze aan totdat je elleboogtrackers horizontaal op één lijn liggen met je polsen.
 skeleton_bone-ELBOW_OFFSET = Elleboogoffset
+skeleton_bone-ELBOW_OFFSET-desc = Dit kan worden aangepast om je virtuele elleboogtrackers omhoog of omlaag te verplaatsen, zodat wordt voorkomen dat VRChat per ongeluk een elleboogtracker aan de borst koppelt.
 
 ## Tracker reset buttons
 
 reset-reset_all = Alle afmetingen resetten
+reset-reset_all_warning-v2 =
+    <b>Waarschuwing:</b> Je verhoudingen worden teruggezet naar de standaardinstellingen, geschaald op basis van je ingestelde lengte.
+    Weet je zeker dat je dit wilt doen?
+reset-reset_all_warning-reset = Verhoudingen resetten
+reset-reset_all_warning-cancel = Annuleren
+reset-reset_all_warning_default-v2 =
+    <b>Waarschuwing:</b> Uw lengte is nog niet ingesteld, je verhoudingen worden teruggezet naar de standaardinstellingen met de standaard lengte.
+    Weet je zeker dat je dit wilt doen?
 reset-full = Volledige reset
 reset-mounting = Reset montage
+reset-mounting-feet = Reset voetmontage
+reset-mounting-fingers = Reset vingermontage
 reset-yaw = Yaw Reset
 
 ## Serial detection stuff
@@ -108,6 +268,7 @@ navbar-settings = Instellingen
 
 bvh-start_recording = BVH opnemen
 bvh-recording = Opname bezig...
+bvh-save_title = Sla BVH-opname op
 
 ## Tracking pause
 
@@ -142,9 +303,13 @@ widget-developer_mode-more_info = Meer informatie
 ## Widget: IMU Visualizer
 
 widget-imu_visualizer = Rotatie
+widget-imu_visualizer-preview = Voorbeeld
+widget-imu_visualizer-hide = Verbergen
 widget-imu_visualizer-rotation_raw = Rauw
 widget-imu_visualizer-rotation_preview = Preview
-widget-imu_visualizer-rotation_hide = Verbergen
+widget-imu_visualizer-acceleration = Versnelling
+widget-imu_visualizer-position = Positie
+widget-imu_visualizer-stay_aligned = Blijf in lijn
 
 ## Widget: Skeleton Visualizer
 
@@ -172,6 +337,7 @@ tracker-table-column-temperature = Temp. °C
 tracker-table-column-linear-acceleration = Accel. X/Y/Z
 tracker-table-column-rotation = Rotatie X/Y/Z
 tracker-table-column-position = Positie X/Y/Z
+tracker-table-column-stay_aligned = Blijf in lijn
 tracker-table-column-url = URL
 
 ## Tracker rotation
@@ -196,9 +362,17 @@ tracker-infos-url = Tracker URL
 tracker-infos-version = Firmware versie
 tracker-infos-hardware_rev = Hardware revisie
 tracker-infos-hardware_identifier = Hardware-id
+tracker-infos-data_support = Gegevensondersteuning
 tracker-infos-imu = IMU-sensor
 tracker-infos-board_type = Mainbord
 tracker-infos-network_version = Protocol Versie
+tracker-infos-magnetometer = Magnetometer
+tracker-infos-magnetometer-status-v1 =
+    { $status ->
+        [DISABLED] Uitgeschakeld
+        [ENABLED] Ingeschakeld
+       *[NOT_SUPPORTED] Niet ondersteund
+    }
 
 ## Tracker settings
 
@@ -213,14 +387,28 @@ tracker-settings-mounting_section-edit = Montage bewerken
 tracker-settings-drift_compensation_section = Laat drift compensatie toe
 tracker-settings-drift_compensation_section-description = Moet deze tracker compenseren voor drift wanneer drift compensatie is ingeschakeld?
 tracker-settings-drift_compensation_section-edit = Laat drift compensatie toe
+tracker-settings-use_mag = Sta de magnetometer toe op deze tracker.
+# Multiline!
+tracker-settings-use_mag-description =
+    Wilt u dat deze tracker de magnetometer gebruikt om drift te verminderen wanneer de magnetometer is toegestaan? <b>Zet de tracker niet uit terwijl u dit aan of uit zet.</b>
+    U moet eerst de magnetometer toestemming geven,<magSetting>click hier om naar de instellingen te gaan</magSetting>.
+tracker-settings-use_mag-label = Laat magnetometer toe
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = Trackernaam
 tracker-settings-name_section-description = Geef een schattige bijnaam :)
 tracker-settings-name_section-placeholder = NightyBeast's linkerbeen
+tracker-settings-name_section-label = Trackernaam
 tracker-settings-forget = Vergeet tracker
 tracker-settings-forget-description = Verwijdert de tracker van de SlimeVR Server en voorkomt dat deze verbinding kan maken totdat de server opnieuw wordt opgestart. De configuratie van de tracker blijft behouden.
 tracker-settings-forget-label = Vergeet tracker
+tracker-settings-update-unavailable = Kan niet worden bijgewerkt (DIY)
+tracker-settings-update-low-battery = Kan niet worden bijgewerkt. Batterij lager dan 50%
+tracker-settings-update-up_to_date = Up to date.
+tracker-settings-update-blocked = Update is niet beschikbaar. Er zijn geen andere versies beschikbaar.
+tracker-settings-update-available = { $versionName } is nu beschikbaar
+tracker-settings-update = Werk nu bij.
+tracker-settings-update-title = Firmware versie
 
 ## Tracker part card info
 
@@ -287,6 +475,7 @@ mounting_selection_menu-close = Sluiten
 settings-sidebar-title = Instellingen
 settings-sidebar-general = Algemeen
 settings-sidebar-tracker_mechanics = Trackersinstellingen
+settings-sidebar-stay_aligned = Blijf in lijn
 settings-sidebar-fk_settings = FK-instellingen
 settings-sidebar-gesture_control = Tikbediening
 settings-sidebar-interface = Interface
@@ -296,6 +485,10 @@ settings-sidebar-utils = Hulpmiddelen
 settings-sidebar-serial = Serieel console
 settings-sidebar-appearance = Uiterlijk
 settings-sidebar-notifications = Notificaties
+settings-sidebar-behavior = Gedrag
+settings-sidebar-firmware-tool = DIY Firmware Tool
+settings-sidebar-vrc_warnings = VRChat Configuratie-waarschuwingen
+settings-sidebar-advanced = Geavanceerd
 
 ## SteamVR settings
 
@@ -348,11 +541,49 @@ settings-general-tracker_mechanics-drift_compensation-description =
     Compenseert voor IMU yaw drift door de toevoeging van een omgekeerde rotatie.
     Veranderd de sterkte van de compensatie en hoeveel resets worden gebruikt.
 settings-general-tracker_mechanics-drift_compensation-enabled-label = Drift compensate
+settings-general-tracker_mechanics-drift_compensation-prediction = Voorspelling van driftcompensatie
+# This cares about multilines
+settings-general-tracker_mechanics-drift_compensation-prediction-description =
+    Voorspelt compensatie van gierdrift buiten het eerder gemeten bereik.
+    Schakel dit in als jouw trackers continu om de gier-as draaien.
+settings-general-tracker_mechanics-drift_compensation-prediction-label = Voorspelling van driftcompensatie
+settings-general-tracker_mechanics-drift_compensation_warning =
+    <b>Waarschuwing:</b> Gebruik alleen driftcompensatie als je heel vaak
+    moet resetten (elke ~5-10 minuten).
+    
+    IMU's die vaak worden gereset, zijn onder ander:
+    Joy-Cons, owoTrack en MPU's (zonder recente firmware).
+settings-general-tracker_mechanics-drift_compensation_warning-cancel = Annuleren
+settings-general-tracker_mechanics-drift_compensation_warning-done = Ik begrijp het
 settings-general-tracker_mechanics-drift_compensation-amount-label = Compensatiesterkte
 settings-general-tracker_mechanics-drift_compensation-max_resets-label = Gebruik de laatste x resets
 settings-general-tracker_mechanics-save_mounting_reset = Sla de automatische montage reset kalibratie op
 settings-general-tracker_mechanics-save_mounting_reset-description = Slaat de automatische montage reset kalibraties van de trackers op tussen herstarts. Nuttig als je een pak draagt waarbij trackers niet bewegen tussen sessies. <b>Niet aanbevolen voor normale gebruikers!</b>
 settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Montage configuratie opslaan
+settings-general-tracker_mechanics-use_mag_on_all_trackers = Gebruik de magnetometer op alle IMU-trackers die dit ondersteunen
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    Gebruikt magnetometer op alle trackers die er een compatibele firmware voor hebben, waardoor drift in stabiele magnetische omgevingen wordt verminderd.
+    Je kan dit per individuele tracker uit zetten in de instellingen van de tracker. <b>Sluit geen van de trackers af terwijl u dit in- en uitschakelt!</b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Gebruik magnetometer op de trackers
+settings-stay_aligned = Blijf in lijn
+settings-stay_aligned-description = ijf in lijn vermindert drift door je trackers geleidelijk aan te passen zodat ze overeenkomen met je ontspannen houdingen.
+settings-stay_aligned-setup-label = Blijf in lijn instellen
+settings-stay_aligned-setup-description = Je moet "Blijf in lijn instellen" voltooien om Blijf in lijn te activeren.
+settings-stay_aligned-warnings-drift_compensation = ⚠ Schakel Drift Compensation uit! Drift Compensation conflicteert met Blijf in lijn.
+settings-stay_aligned-enabled-label = Trackers aanpassen
+settings-stay_aligned-hide_yaw_correction-label = Aanpassing verbergen (om te vergelijken zonder Blijf in lijn)
+settings-stay_aligned-general-label = Algemeen
+settings-stay_aligned-relaxed_poses-label = Ontspannen houdingen
+settings-stay_aligned-relaxed_poses-description = Blijf in lijn gebruikt je ontspannen houdingen om je trackers in lijn te houden. Gebruik "Stel Blijf in lijn in" om deze houdingen bij te werken.
+settings-stay_aligned-relaxed_poses-standing = Pas trackers aan terwijl je staat
+settings-stay_aligned-relaxed_poses-sitting = Pas trackers aan terwijl je op een stoel zit
+settings-stay_aligned-relaxed_poses-flat = Pas trackers aan terwijl je op de grond zit of op je rug ligt.
+settings-stay_aligned-relaxed_poses-save_pose = Sla houding op
+settings-stay_aligned-relaxed_poses-reset_pose = Reset houding
+settings-stay_aligned-relaxed_poses-close = Sluiten
+settings-stay_aligned-debug-label = Foutopsporing
+settings-stay_aligned-debug-description = Voeg je instellingen toe wanneer je problemen met Blijf in lijn rapporteert.
+settings-stay_aligned-debug-copy-label = Instellingen naar klembord kopiëren
 
 ## FK/Tracking settings
 
@@ -378,6 +609,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = Foot-plant rotee
 settings-general-fk_settings-leg_fk = Been tracking
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Schakel Montage Reset voor de voeten in door op je tenen te staan.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Voeten montage reset.
+settings-general-fk_settings-enforce_joint_constraints = Bewegingslimieten van het skelet
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Beperkingen toepassen
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Voorkomt dat gewrichten over hun limiet draaien
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Corrigeren met beperkingen
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Corrigeer gewrichtsrotaties wanneer ze hun limiet overschrijden
 settings-general-fk_settings-arm_fk = Arm tracking
 settings-general-fk_settings-arm_fk-description = Verander de manier waarop de armen worden getrackt.
 settings-general-fk_settings-arm_fk-force_arms = Dwing armen vanuit HMD
@@ -409,9 +645,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Berek
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Bereken het gemiddelde van de 'yaw en roll van de knie trackers met die van de enkels'
 settings-general-fk_settings-self_localization-title = Mocap modus
 settings-general-fk_settings-self_localization-description = Mocap modus staat het skelet model toe om zijn eigen positie te bepalen zonder het gebruik van een headset of andere trackers. Dit vergt wel het gebruik van voet en hoofd trackers, dit is momenteel nog expirimenteel.
-settings-general-fk_settings-vive_emulation-title = Vive-emulatie
-settings-general-fk_settings-vive_emulation-description = Emuleer de problemen met de taille van Vive trackers. Dit is een mop en maakt tracking slechter.
-settings-general-fk_settings-vive_emulation-label = Vive-emulatie inschakelen
 
 ## Gesture control settings (tracker tapping)
 
@@ -452,6 +685,9 @@ settings-general-interface-dev_mode = Ontwikkelaarsmodus
 settings-general-interface-dev_mode-description = Deze modus kan nuttig zijn als je diepgaande gegevens nodig hebt of op een geavanceerd niveau wilt communiceren met aangesloten trackers.
 settings-general-interface-dev_mode-label = Ontwikkelaarsmodus
 settings-general-interface-theme = Themakleur
+settings-general-interface-show-navbar-onboarding = Toon "{ navbar-onboarding }" op de navigatiebalk
+settings-general-interface-show-navbar-onboarding-description = Dit verandert of de knop "{ navbar-onboarding }" wordt weergegeven op de navigatiebalk.
+settings-general-interface-show-navbar-onboarding-label = Toon "{ navbar-onboarding }"
 settings-general-interface-lang = Selecteer taal
 settings-general-interface-lang-description = Verander de standaardtaal die je wilt gebruiken.
 settings-general-interface-lang-placeholder = Selecteer de te gebruiken taal
@@ -463,6 +699,9 @@ settings-interface-appearance-font-os_font = Besturingssysteem lettertype
 settings-interface-appearance-font-slime_font = Standaard lettertype
 settings-interface-appearance-font_size = Standaard lettertype grote
 settings-interface-appearance-font_size-description = Dit past het lettertype grote aan voor het gehele interfeace, behalve voor deze instellingen pagina.
+settings-interface-appearance-decorations = Gebruik het systeem native decoraties
+settings-interface-appearance-decorations-description = Dit zal de bovenste balk van de interface niet weergeven en zal in plaats daarvan die van het besturingssysteem gebruiken.
+settings-interface-appearance-decorations-label = Gebruik de native decoraties
 
 ## Notification settings
 
@@ -477,6 +716,13 @@ settings-general-interface-feedback_sound-volume = Feedback geluid volume
 settings-general-interface-connected_trackers_warning = Waarschuwing voor verbonden trackers
 settings-general-interface-connected_trackers_warning-description = Deze optie toont een pop-up bericht telkens wanneer je SlimeVR probeert af te sluiten terwijl er nog trackers verbonden zijn. Dit bericht herinnert je eraan om je trackers uit te schakelen wanneer je klaar bent om de batterijduur te sparen.
 settings-general-interface-connected_trackers_warning-label = Waarschuwing voor verbonden trackers bij het afsluiten
+
+## Behavior settings
+
+settings-interface-behavior = Gedrag
+settings-general-interface-dev_mode = Ontwikkelaarsmodus
+settings-general-interface-dev_mode-description = Deze modus kan nuttig zijn als je diepgaande gegevens nodig hebt of op een geavanceerd niveau wilt communiceren met aangesloten trackers.
+settings-general-interface-dev_mode-label = Ontwikkelaarsmodus
 settings-general-interface-use_tray = Minimaliseren naar systeem vak
 settings-general-interface-use_tray-description = Hiermee kun je het venster sluiten zonder de SlimeVR server te beëindigen, zodat je deze op de achtergrond kunt blijven gebruiken zonder dat de GUI in de weg zit.
 settings-general-interface-use_tray-label = Minimaliseren naar systeem vak
@@ -489,6 +735,17 @@ settings-general-interface-discord_presence-message =
         [one] Gebruikt 1 tracker
        *[other] Gebruikt { $amount } trackers
     }
+settings-interface-behavior-error_tracking = Foutverzameling via Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Geeft u toestemming voor het verzamelen van geanonimiseerde foutgegevens?</h1>
+    
+    <b>We verzamelen geen persoonlijke informatie</b> zoals uw IP-adres of draadloze inloggegevens. SlimeVR hecht veel waarde aan uw privacy!
+    
+    Om de beste gebruikerservaring te bieden, verzamelen we geanonimiseerde foutrapporten, prestatiestatistieken en informatie over het besturingssysteem. Dit helpt ons bij het detecteren van fouten en problemen met SlimeVR. Deze statistieken worden verzameld via Sentry.io.
+settings-interface-behavior-error_tracking-label = Stuur fouten naar de ontwikkelaars
+settings-interface-behavior-bvh_directory = Map om BVH-opnames op te slaan
+settings-interface-behavior-bvh_directory-description = Kies een map om je BVH-opnames op te slaan, zodat je niet elke keer hoeft te kiezen waar je ze opslaat.
+settings-interface-behavior-bvh_directory-label = Map voor BVH-opnames
 
 ## Serial settings
 
@@ -547,6 +804,13 @@ settings-osc-vrchat-description-v1 = Wijzig instellingen die specifiek zijn voor
 settings-osc-vrchat-enable = Inschakelen
 settings-osc-vrchat-enable-description = Schakel het verzenden en ontvangen van gegevens in en uit.
 settings-osc-vrchat-enable-label = Inschakelen
+settings-osc-vrchat-oscqueryEnabled = OSCQuery inschakelen
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery detecteert automatisch actieve instanties van VRChat en stuurt hen data.
+    Het kan zichzelf ook aan hen bekendmaken om HMD- en controllerdata te ontvangen.
+    Om HMD- en controllerdata van VRChat te kunnen ontvangen, ga je in het hoofdmenu naar Instellingen,
+    onder "Tracking & IK", en schakel je "Allow Sending Head and Wrist VR Tracking OSC Data" in.
+settings-osc-vrchat-oscqueryEnabled-label = Schakel OSCQuery in
 settings-osc-vrchat-network = Netwerkpoorten
 settings-osc-vrchat-network-description-v1 = Stel de poorten in voor het ontvangen en verzenden van tracking data. Kan op standaardinstellingen blijven voor VRChat.
 settings-osc-vrchat-network-port_in =
@@ -589,12 +853,7 @@ settings-osc-vmc-network-address-description = Stel het adres in waarnaar gegeve
 settings-osc-vmc-network-address-placeholder = IPV4-adres
 settings-osc-vmc-vrm = VRM Model
 settings-osc-vmc-vrm-description = Laad een VRM-model om hoofdverankering mogelijk te maken en zorg voor een hogere compatibiliteit met andere applicaties.
-settings-osc-vmc-vrm-model_unloaded = Geen model geladen
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Model geladen: { $name }
-       *[other] Ongetitelde model geladen
-    }
+settings-osc-vmc-vrm-untitled_model = Naamloos model
 settings-osc-vmc-vrm-file_select = Sleep een modelbestand naar hier om ze te gebruiken of <u>blader</u>.
 settings-osc-vmc-anchor_hip = Heupverankering
 settings-osc-vmc-anchor_hip-description = Veranker de tracking aan de heupen, handig voor zittende VTubing. Als u deze uitschakelt, laadt u een VRM-model.
@@ -603,6 +862,39 @@ settings-osc-vmc-mirror_tracking = Gespiegelde tracking
 settings-osc-vmc-mirror_tracking-description = De tracking horizontaal spiegelen.
 settings-osc-vmc-mirror_tracking-label = Gespiegelde tracking
 
+## Advanced settings
+
+settings-utils-advanced = Geavanceerd
+settings-utils-advanced-reset-gui = GUI-instellingen resetten
+settings-utils-advanced-reset-gui-description = Herstel de standaardwaarden voor instellingen van de interface.
+settings-utils-advanced-reset-gui-label = GUI resetten
+settings-utils-advanced-reset-server = Tracker instellingen resetten
+settings-utils-advanced-reset-server-description = Herstel de standaardwaarden voor instellingen van de tracking.
+settings-utils-advanced-reset-server-label = Tracking resetten
+settings-utils-advanced-reset-all = Alle instellingen resetten
+settings-utils-advanced-reset-all-description = Herstel de standaardwaarden voor instellingen van beide de interface en de tracking.
+settings-utils-advanced-reset-all-label = Alles resetten
+settings-utils-advanced-reset_warning =
+    { $type ->
+        [gui]
+            <b>Waarschuwing</b>Hiermee worden al uw GUI instellingen teruggezet naar de standaardinstellingen. 
+            Weet u zeker dat u dit wilt doen?
+        [server]
+            <b>Waarschuwing</b>Hiermee worden al uw tracking instellingen teruggezet naar de standaardinstellingen.
+            Weet u zeker dat u dit wilt doen?
+       *[all]
+            <b>Waarschuwing:</b> Hiermee worden al uw instellingen teruggezet naar de standaardinstellingen.
+            Weet u zeker dat u dit wilt doen?
+    }
+settings-utils-advanced-reset_warning-reset = Instellingen resetten
+settings-utils-advanced-reset_warning-cancel = Annuleren
+settings-utils-advanced-open_data-v1 = Configuratiemap
+settings-utils-advanced-open_data-description-v1 = Open de configuratiemap van SlimeVR in de bestandsverkenner, met configuratiebestanden.
+settings-utils-advanced-open_data-label = Map openen
+settings-utils-advanced-open_logs = logboeken
+settings-utils-advanced-open_logs-description = Open de logmap van SlimeVR in de bestandsverkenner, met de logboeken van de app
+settings-utils-advanced-open_logs-label = Map openen
+
 ## Setup/onboarding menu
 
 onboarding-skip = Setupgids overslaan
@@ -628,6 +920,7 @@ onboarding-wifi_creds-submit = Verzenden!
 onboarding-wifi_creds-ssid =
     .label = WiFi naam
     .placeholder = Vul WiFi naam in
+onboarding-wifi_creds-ssid-required = Wi-Fi-naam is vereist
 onboarding-wifi_creds-password =
     .label = Paswoord
     .placeholder = Vul paswoord in
@@ -685,12 +978,24 @@ onboarding-connect_tracker-issue-serial = Ik heb problemen met verbinden!
 onboarding-connect_tracker-usb = USB Tracker
 onboarding-connect_tracker-connection_status-none = Op zoek naar trackers
 onboarding-connect_tracker-connection_status-serial_init = Verbinding maken met een serieel apparaat
+onboarding-connect_tracker-connection_status-obtaining_mac_address = Het mac-adres van de tracker verkrijgen
 onboarding-connect_tracker-connection_status-provisioning = Wifi-inloggegevens verzenden
 onboarding-connect_tracker-connection_status-connecting = Wifi-inloggegevens verzenden
 onboarding-connect_tracker-connection_status-looking_for_server = Op zoek naar server
 onboarding-connect_tracker-connection_status-connection_error = Kan geen verbinding maken met Wi-Fi
 onboarding-connect_tracker-connection_status-could_not_find_server = Kan de server niet vinden
 onboarding-connect_tracker-connection_status-done = Verbonden met de server
+onboarding-connect_tracker-connection_status-no_serial_log = Kon geen logbestanden van de tracker ophalen.
+onboarding-connect_tracker-connection_status-no_serial_device_found = Kon geen tracker via USB vinden.
+onboarding-connect_serial-error-modal-no_serial_log = Staat de tracker aan?
+onboarding-connect_serial-error-modal-no_serial_log-desc = Zorg dat de tracker aan staat en verbonden is met je computer.
+onboarding-connect_serial-error-modal-no_serial_device_found = Geen trackers gedetecteerd
+onboarding-connect_serial-error-modal-no_serial_device_found-desc =
+    Sluit een tracker met de meegeleverde USB-kabel aan op je computer en zet de tracker aan.
+    Als dit niet werkt:
+      -probeer een andere USB-kabel
+      -probeer een andere USB-poort
+      -probeer de SlimeVR-server opnieuw te installeren en selecteer "USB Drivers" in het onderdeelkeuze-menu
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -708,12 +1013,13 @@ onboarding-connect_tracker-next = Ik heb al mijn trackers verbonden
 
 onboarding-calibration_tutorial = Handleiding voor IMU-kalibratie
 onboarding-calibration_tutorial-subtitle = Helpt met het verminderen van het driften van de trackers!
-onboarding-calibration_tutorial-description = Elke keer dat je jouw trackers inschakelt, moeten ze even op een plat oppervlak rusten om te kalibreren. Leg al je trackers op een vlak oppervlak en <b>verplaats ze niet!</b>
+onboarding-calibration_tutorial-description-v1 = Zet je trackers aan en leg ze even op een stabiele ondergrond om te kalibreren. Kalibratie kan op elk moment na het inschakelen van de trackers worden uitgevoerd — deze pagina biedt alleen een handleiding. Klik op de knop "{ onboarding-calibration_tutorial-calibrate }" om te beginnen en <b>beweeg je trackers daarna niet meer!</b>
 onboarding-calibration_tutorial-calibrate = Al mijn trackers liggen neer
 onboarding-calibration_tutorial-status-waiting = Ik wacht op jou
 onboarding-calibration_tutorial-status-calibrating = Kalibreren
 onboarding-calibration_tutorial-status-success = Aardig!
 onboarding-calibration_tutorial-status-error = De tracker werd verplaatst
+onboarding-calibration_tutorial-skip = Tutorial overslaan
 
 ## Tracker assignment tutorial
 
@@ -835,13 +1141,13 @@ onboarding-assign_trackers-warning-WAIST =
 
 onboarding-choose_mounting = Welke montagekalibratiemethode moet worden gebruikt?
 # Multiline text
-onboarding-choose_mounting-description = De oriëntatie van de montage corrigeert de plaatsing van trackers op uw lichaam.
+onboarding-choose_mounting-description = De oriëntatie van de montage corrigeert de plaatsing van trackers op je lichaam.
 onboarding-choose_mounting-auto_mounting = Automatische bevestiging
-# Italized text
+# Italicized text
 onboarding-choose_mounting-auto_mounting-label-v2 = Aanbevolen
 onboarding-choose_mounting-auto_mounting-description = Dit detecteert automatisch de montagerichtingen voor al uw trackers door middel van 2 poses
 onboarding-choose_mounting-manual_mounting = Handmatige bevestiging
-# Italized text
+# Italicized text
 onboarding-choose_mounting-manual_mounting-label-v2 = Misschien niet precies genoeg
 onboarding-choose_mounting-manual_mounting-description = Hiermee kunt u de montagerichting handmatig kiezen voor elke tracker
 # Multiline text
@@ -873,43 +1179,27 @@ onboarding-automatic_mounting-mounting_reset-title = Montage-reset
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Ga staan in een "skie"-houding met gebogen benen, je bovenlichaam naar voren gekanteld en armen gebogen.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Druk op de knop "Reset montage" en wacht 3 seconden voordat de montagerichtingen van de trackers opnieuw worden ingesteld.
 onboarding-automatic_mounting-preparation-title = Voorbereiding
-onboarding-automatic_mounting-preparation-step-0 = 1. Sta rechtop met je armen langs je zij.
-onboarding-automatic_mounting-preparation-step-1 = 2. Druk op de knop "Resetten" en wacht 3 seconden voordat de trackers opnieuw worden ingesteld.
+onboarding-automatic_mounting-preparation-v2-step-0 = 1. Druk op de knop "Volledige reset".
+onboarding-automatic_mounting-preparation-v2-step-1 = 2. Ga rechtop staan met je armen langs je zij. Zorg dat je recht vooruit kijkt.
+onboarding-automatic_mounting-preparation-v2-step-2 = 3. Houd deze houding aan totdat de timer van 3 seconden is afgelopen.
 onboarding-automatic_mounting-put_trackers_on-title = Doe je trackers aan
 onboarding-automatic_mounting-put_trackers_on-description = Om montagerichtingen te kalibreren gaan we gebruik maken van de trackers die je net hebt toegewezen. Doe al je trackers aan, je kunt zien welke trackers welke zijn in de figuur rechts.
 onboarding-automatic_mounting-put_trackers_on-next = Ik heb al mijn trackers aan
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = Welke verhoudingskalibratiemethode moet worden gebruikt?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    Lichaamsverhoudingen worden gebruikt om de afmetingen van je lichaam te bepalen. Deze informatie is nodig om de posities van de trackers te berekenen.
-    Als de verhoudingen van je lichaam niet overeenkomen met de opgeslagen waarden, zal de tracking-precisie slechter zijn. Je kunt dan last krijgen van ongemakkelijke effecten zoals schuiven of glijden, of kan je lichaam niet goed overeenkomen met je avatar in VR.
-    <b>Je hoeft je lichaam maar één keer te meten!</b> Tenzij de metingen onjuist zijn of je lichaam is veranderd, hoef je dit niet opnieuw te doen.
-onboarding-choose_proportions-auto_proportions = Automatische verhoudingen
-# Italized text
-onboarding-choose_proportions-auto_proportions-subtitle = Aanbevolen
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Deze functie zal je lichaamsverhoudingen schatten door een sample van je bewegingen op te nemen en deze door een algoritme te laten analyseren. 
-    <b>Hiervoor moet je headset (HMD) verbonden zijn met SlimeVR en op je hoofd zitten!</b>
-onboarding-choose_proportions-manual_proportions = Handmatige lichaamsverhoudingen
-# Italized text
-onboarding-choose_proportions-manual_proportions-subtitle = Voor kleine details
-onboarding-choose_proportions-manual_proportions-description = Hier kan je jouw verhoudingen handmatig aanpassen
-onboarding-choose_proportions-export = Export proporties
-onboarding-choose_proportions-import = Importeer proporties
-onboarding-choose_proportions-import-success = geïmporteerd
-onboarding-choose_proportions-import-failed = Mislukt
-onboarding-choose_proportions-file_type = Lichaamsproporties bestand
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Ga terug naar de reset tutorial
 onboarding-manual_proportions-title = Handmatige lichaamsverhoudingen
-onboarding-manual_proportions-precision = Precisie-aanpassing
-onboarding-manual_proportions-auto = Automatische kalibratie
-onboarding-manual_proportions-ratio = Aanpassen via verhoudingen
+onboarding-manual_proportions-fine_tuning_button = Automatisch afstemmen van verhoudingen
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Sluit een VR-headset aan om automatische fijnafstelling te gebruiken
+onboarding-manual_proportions-export = Export proporties
+onboarding-manual_proportions-import = Importeer proporties
+onboarding-manual_proportions-file_type = Lichaamsproporties bestand
+onboarding-manual_proportions-normal_increment = Normale verhoging
+onboarding-manual_proportions-precise_increment = Nauwkeurige verhoging
+onboarding-manual_proportions-grouped_proportions = Gegroepeerde verhoudingen
+onboarding-manual_proportions-all_proportions = Alle verhoudingen
+onboarding-manual_proportions-estimated_height = Geschatte gebruikerslengte
 
 ## Tracker automatic proportions setup
 
@@ -925,21 +1215,31 @@ onboarding-automatic_proportions-requirements-title = Vereisten
 # Each line of text is a different list item
 onboarding-automatic_proportions-requirements-descriptionv2 = Je hebt voldaan aan de minimale vereisten om je voeten te tracken (over het algemeen 5 trackers). Je hebt je trackers en headset aan en draagt ze. Je trackers en headset zijn verbonden met de SlimeVR server en werken naar behoren (zonder haperingen, loskoppelingen etc.). Je headset stuurt positiedata naar de SlimeVR server (dit vereist doorgaans dat SteamVR draait en verbonden is met SlimeVR via de SlimeVR SteamVR-driver). De tracking werkt en registreert je bewegingen nauwkeurig (je hebt bijvoorbeeld een volledige reset uitgevoerd en de trackers bewegen in de juiste richting bij schoppen, bukken, zitten etc.).
 onboarding-automatic_proportions-requirements-next = Ik heb de vereisten gelezen
-onboarding-automatic_proportions-check_height-title = Controleer je lengte
-onboarding-automatic_proportions-check_height-description =
-    We gebruiken je lengte als een basis voor onze metingen middels de HMD's hoogte, hiermee bepalen we je echte lengte.
-    Maar het is beter om zelf te controleren of dit klopt.
+onboarding-automatic_proportions-check_height-title-v3 = Meet de hoogte van uw headset
+onboarding-automatic_proportions-check_height-description-v2 = De hoogte van uw headset (HMD) moet iets minder zijn dan uw volledige lengte, aangezien headsets uw ooghoogte meten. Deze meting wordt gebruikt als basis voor uw lichaamsverhoudingen.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Druk op de knop terwijl je <u>rechtop</u> staat om je lengte te berekenen. Je hebt 3 seconden na dat je op de knop drukt!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Begin met meten terwijl je <u>rechtop</u> staat om je lengte te meten. Let erop dat je je handen niet hoger dan je headset tilt, want dat kan de meting beïnvloeden!
 onboarding-automatic_proportions-check_height-guardian_tip = Als je een losse VR-bril gebruikt, zorg er dan voor dat je guardian/veilige zone is ingeschakeld zodat je lengte correct is gekalibreerd!
-onboarding-automatic_proportions-check_height-fetch_height = Ik sta!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Onbekend
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = Je HMD lengte is
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = Je echte lengte is
+onboarding-automatic_proportions-check_height-hmd_height2 = De hoogte van uw headset is:
+onboarding-automatic_proportions-check_height-measure-start = Begin met meten
+onboarding-automatic_proportions-check_height-measure-stop = Stoppen met meten
+onboarding-automatic_proportions-check_height-measure-reset = Probeer opnieuw te meten
 onboarding-automatic_proportions-check_height-next_step = Ze zijn goed
+onboarding-automatic_proportions-check_floor_height-title = Meet uw vloerhoogte (optioneel)
+onboarding-automatic_proportions-check_floor_height-description = In sommige gevallen wordt uw vloerhoogte mogelijk niet correct ingesteld door uw headset, waardoor de hoogte van de headset hoger wordt gemeten dan zou moeten. U kunt de "hoogte" van uw vloer meten om de hoogte van uw headset te corrigeren.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Begin met meten en zet een controller op je vloer om de hoogte te meten. Als je zeker weet dat je vloerhoogte klopt, kun je deze stap overslaan.
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = Uw vloerhoogte is:
+onboarding-automatic_proportions-check_floor_height-full_height = Uw geschatte volledige lengte is:
+onboarding-automatic_proportions-check_floor_height-measure-start = Begin met meten
+onboarding-automatic_proportions-check_floor_height-measure-stop = Stoppen met meten
+onboarding-automatic_proportions-check_floor_height-measure-reset = Probeer opnieuw te meten
+onboarding-automatic_proportions-check_floor_height-skip_step = Sla deze stap over en sla op.
+onboarding-automatic_proportions-check_floor_height-next_step = Gebruik vloerhoogte en bespaar
 onboarding-automatic_proportions-start_recording-title = Zorg dat je klaar bent om te bewegen
 onboarding-automatic_proportions-start_recording-description = We gaan nu enkele specifieke houdingen en bewegingen opnemen. Deze worden in het volgende scherm geprompt. Zorg dat je klaar bent om te beginnen als de knop wordt ingedrukt!
 onboarding-automatic_proportions-start_recording-next = Start opname
@@ -969,10 +1269,78 @@ onboarding-automatic_proportions-verify_results-redo = Opname opnieuw doen
 onboarding-automatic_proportions-verify_results-confirm = Ze zijn correct
 onboarding-automatic_proportions-done-title = Lichaam gemeten en opgeslagen.
 onboarding-automatic_proportions-done-description = Je kalibratie voor lichaamsverhoudingen is voltooid!
-onboarding-automatic_proportions-error_modal =
-    <b>Waarschuwing:</b> Er is een error ontstaan bij het schatten van de proporties!
-    Check alsjeblieft <docs>de docs</docs> of join onze <discord>Discord</Discord> voor hulp ^_^
+onboarding-automatic_proportions-error_modal-v2 =
+    <b>Waarschuwing:</b> Er is een fout opgetreden bij het schatten van de verhoudingen!
+    Dit is waarschijnlijk een probleem met de montagekalibratie. Zorg ervoor dat je tracking goed werkt voordat je het opnieuw probeert.
+     <docs>Bekijk de documentatie</docs> of word lid van onze <discord>Discord</discord> voor hulp ^_^
 onboarding-automatic_proportions-error_modal-confirm = Begrepen!
+onboarding-automatic_proportions-smol_warning =
+    Uw ingestelde lengte van { $height } is lager dan de toegestane minimumlengte van { $minHeight }.
+    <b>Voer de metingen opnieuw uit en controleer of ze correct zijn.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Ga terug
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = Geschaalde proporties
+onboarding-scaled_proportions-description =
+    Voor een correcte werking van de SlimeVR-trackers hebben we de lengte van uw botten nodig.
+    We gebruiken hiervoor een gemiddelde lichaamsverhouding, geschaald op basis van uw lengte.
+onboarding-scaled_proportions-manual_height-title = Configureer uw lengte
+onboarding-scaled_proportions-manual_height-description-v2 = Deze lengte wordt gebruikt als basis voor je lichaamsverhoudingen.
+onboarding-scaled_proportions-manual_height-missing_steamvr =
+    SteamVR is momenteel niet verbonden met SlimeVR, dus metingen kunnen niet worden gebaseerd op je headset.
+    <b>Ga verder op eigen risico of raadpleeg de documentatie!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = Uw volledige lengte is
+onboarding-scaled_proportions-manual_height-estimated_height = De geschatte hoogte van uw headset is:
+onboarding-scaled_proportions-manual_height-next_step = Opslaan en doorgaan
+onboarding-scaled_proportions-manual_height-warning =
+    Je gebruikt momenteel de handmatige manier om geschaalde verhoudingen in te stellen!
+    <b>Deze modus wordt alleen aanbevolen als je geen HMD met SlimeVR gebruikt.</b>
+    
+    Om de automatische geschaalde verhoudingen te kunnen gebruiken, doe het volgende:
+onboarding-scaled_proportions-manual_height-warning-no_hmd = Sluit een VR-headset aan
+onboarding-scaled_proportions-manual_height-warning-no_controllers = Zorg ervoor dat je controllers zijn verbonden en correct aan je handen zijn toegewezen
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = Reset je lichaamsverhoudingen
+onboarding-scaled_proportions-reset_proportion-description = Om je lichaamsverhoudingen op basis van je lengte in te stellen, moet je nu al je verhoudingen resetten. Dit zal alle verhoudingen die je hebt ingesteld wissen en een basisconfiguratie bieden.
+onboarding-scaled_proportions-done-title = Lichaamsverhoudingen ingesteld
+onboarding-scaled_proportions-done-description = Je lichaamsverhoudingen zouden nu gebaseerd moeten zijn op je lengte
+
+## Stay Aligned setup
+
+onboarding-stay_aligned-title = Blijf in lijn
+onboarding-stay_aligned-description = Stel Blijf in lijn in om je trackers in lijn te houden.
+onboarding-stay_aligned-put_trackers_on-title = Doe je trackers aan
+onboarding-stay_aligned-put_trackers_on-description = Om je ontspannen houdingen op te slaan, gebruiken we de trackers die je zojuist hebt toegewezen. Doe al je trackers om; je kunt zien welke welke zijn op de afbeelding rechts.
+onboarding-stay_aligned-put_trackers_on-trackers_warning = Je hebt momenteel minder dan 5 trackers aangesloten en toegewezen! Dit is het minimale aantal trackers dat nodig is om Blijf in lijn goed te laten werken.
+onboarding-stay_aligned-put_trackers_on-next = Ik heb al mijn trackers aan
+onboarding-stay_aligned-verify_mounting-title = Controleer je montage
+onboarding-stay_aligned-verify_mounting-step-0 = Blijf in lijn vereist een goede montage. Anders krijg je geen goede ervaring met Blijf in lijn.
+onboarding-stay_aligned-verify_mounting-step-1 = 1. Beweeg terwijl je staat.
+onboarding-stay_aligned-verify_mounting-step-2 = 2. Ga zitten en beweeg je benen en voeten.
+onboarding-stay_aligned-verify_mounting-step-3 = 3. Als je trackers niet op de juiste plek zitten, druk dan op "Montagekalibratie opnieuw uitvoeren".
+onboarding-stay_aligned-verify_mounting-redo_mounting = Montagekalibratie opnieuw uitvoeren
+onboarding-stay_aligned-preparation-title = Voorbereiding
+onboarding-stay_aligned-preparation-tip = Zorg dat je rechtop staat. Blijf recht vooruit kijken en houd je armen langs je zij.
+onboarding-stay_aligned-relaxed_poses-standing-title = Ontspannen Staande Houding
+onboarding-stay_aligned-relaxed_poses-standing-step-0 = 1. Ga in een comfortabele houding staan. Ontspan!
+onboarding-stay_aligned-relaxed_poses-standing-step-1-v2 = 2. Druk op de knop "Houding opslaan".
+onboarding-stay_aligned-relaxed_poses-sitting-title = Ontspannen Zittende Houding op Stoel
+onboarding-stay_aligned-relaxed_poses-sitting-step-0 = 1. Ga comfortabel zitten. Ontspan!
+onboarding-stay_aligned-relaxed_poses-sitting-step-1-v2 = 2. Druk op de knop "Houding opslaan".
+onboarding-stay_aligned-relaxed_poses-flat-title = Ontspannen Zittende Houding op de Vloer
+onboarding-stay_aligned-relaxed_poses-flat-step-0 = 1. Ga op de vloer zitten met je benen voor je uit. Ontspan!
+onboarding-stay_aligned-relaxed_poses-flat-step-1-v2 = 2. Druk op de knop "Houding opslaan".
+onboarding-stay_aligned-relaxed_poses-skip_step = Overslaan
+onboarding-stay_aligned-done-title = Blijf in lijn ingeschakeld!
+onboarding-stay_aligned-done-description = Je Blijf in lijn-instelling is voltooid!
+onboarding-stay_aligned-done-description-2 = De setup is voltooid! Je kunt het proces opnieuw starten als je de houdingen opnieuw wilt kalibreren.
+onboarding-stay_aligned-previous_step = Vorige
+onboarding-stay_aligned-next_step = Volgende
+onboarding-stay_aligned-restart = Herstarten
+onboarding-stay_aligned-done = Klaar
 
 ## Home
 
@@ -997,6 +1365,154 @@ status_system-StatusSteamVRDisconnected =
     }
 status_system-StatusTrackerError = De { $trackerName } tracker heeft een error.
 status_system-StatusUnassignedHMD = De VR-headset moet worden toegewezen als hoofdtracker.
+status_system-StatusPublicNetwork =
+    { $count ->
+        [one] Je netwerkprofiel staat momenteel ingesteld op Openbaar ({ $adapters }). Dit wordt niet aanbevolen voor een goede werking van SlimeVR. <PublicFixLink>Hier lees je hoe je het kunt oplossen.</PublicFixLink>
+       *[other] Sommige van je netwerkadapters staan ingesteld op openbaar: { $adapters }. Dit wordt niet aanbevolen voor een goede werking van SlimeVR. <PublicFixLink>Hier lees je hoe je dit kunt oplossen.</PublicFixLink>
+    }
+
+## Firmware tool globals
+
+firmware_tool-next_step = Volgende stap
+firmware_tool-previous_step = Vorige stap
+firmware_tool-ok = Ziet er goed uit
+firmware_tool-retry = Opnieuw
+firmware_tool-loading = Laden...
+
+## Firmware tool Steps
+
+firmware_tool = DIY firmware-tool
+firmware_tool-description = Hiermee kan je uw DIY-trackers configureren en flashen
+firmware_tool-not_available = Oeps, de firmwaretool is momenteel niet beschikbaar. Kom later terug!
+firmware_tool-not_compatible = De firmwaretool is niet compatibel met deze versie van de server. Gelieve te updaten!
+firmware_tool-board_step = Selecteer je bord
+firmware_tool-board_step-description = Selecteer een van de onderstaande borden.
+firmware_tool-board_pins_step = Controleer de pinnen
+firmware_tool-board_pins_step-description =
+    Controleer of de geselecteerde pinnen correct zijn.
+    Als je de SlimeVR-documentatie hebt gevolgd, zouden de standaardwaarden correct moeten zijn
+firmware_tool-board_pins_step-enable_led = LED inschakelen
+firmware_tool-board_pins_step-led_pin =
+    .label = LED-pin
+    .placeholder = Voer het adres van de LED-pin in
+firmware_tool-board_pins_step-battery_type = Selecteer het batterijtype
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Externe batterij
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Interne batterij
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = Interne MCP3021
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = Batterij sensor Pin
+    .placeholder = Voer het pin-adres van de batterij sensor in
+firmware_tool-board_pins_step-battery_resistor =
+    .label = Batterij Weerstand (Ohm)
+    .placeholder = Voer de waarde van de batterijweerstand in
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = Batterij Shield R1 (Ohm)
+    .placeholder = Voer de waarde in van Battery Shield R1
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = Batterij Shield R2 (Ohm)
+    .placeholder = Voer de waarde in van Battery Shield R2
+firmware_tool-add_imus_step = Declareer uw IMU's
+firmware_tool-add_imus_step-description =
+    Voeg de IMU's toe die je tracker heeft
+    Als je de SlimeVR-documentatie hebt gevolgd, zouden de standaardwaarden correct moeten zijn.
+firmware_tool-add_imus_step-imu_type-label = IMU-type
+firmware_tool-add_imus_step-imu_type-placeholder = Selecteer het type IMU
+firmware_tool-add_imus_step-imu_rotation =
+    .label = IMU-rotatie (graden)
+    .placeholder = Rotatie van de IMU
+firmware_tool-add_imus_step-scl_pin =
+    .label = SCL-pin
+    .placeholder = Pin-adres van SCL
+firmware_tool-add_imus_step-sda_pin =
+    .label = SDA-pin
+    .placeholder = Pin-adres van SDA
+firmware_tool-add_imus_step-int_pin =
+    .label = INT-pin
+    .placeholder = Pin-adres van INT
+firmware_tool-add_imus_step-optional_tracker =
+    .label = Optionele tracker
+firmware_tool-add_imus_step-show_less = Toon minder
+firmware_tool-add_imus_step-show_more = Toon meer
+firmware_tool-add_imus_step-add_more = Voeg meer IMU's toe
+firmware_tool-select_firmware_step = Selecteer de firmwareversie
+firmware_tool-select_firmware_step-description = Kies de versie van de firmware die je wilt gebruiken
+firmware_tool-select_firmware_step-show-third-party =
+    .label = Firmware van derden weergeven
+firmware_tool-flash_method_step = Flashing methode
+firmware_tool-flash_method_step-description = Kies de flashingsmethode die je wilt gebruiken
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Gebruik de draadloze methode. Je tracker zal de Wi-Fi gebruiken om de firmware bij te werken. Werkt alleen op reeds geconfigureerde trackers.
+firmware_tool-flash_method_step-serial =
+    .label = Serial
+    .description = Gebruik een USB-kabel om je tracker bij te werken.
+firmware_tool-flashbtn_step = Druk op de bootknop
+firmware_tool-flashbtn_step-description = Voordat u naar de volgende stap gaat, zijn er een paar dingen die u moet doen.
+firmware_tool-flashbtn_step-board_SLIMEVR = Zet de tracker uit, verwijder de behuizing (indien aanwezig), verbind een USB-kabel met deze computer en voer vervolgens een van de volgende stappen uit, afhankelijk van de revisie van uw SlimeVR-board:
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Zet de tracker aan terwijl u het tweede rechthoekige FLASH-pad vanaf de rand aan de bovenkant van het board kortsluit, en het metalen schild van de microcontroller.
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Zet de tracker aan terwijl u het ronde FLASH-pad aan de bovenkant van het board kortsluit, en het metalen schild van de microcontroller.
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Zet de tracker aan terwijl u de FLASH-knop aan de bovenkant van het board indrukt.
+firmware_tool-flashbtn_step-board_OTHER =
+    Voordat u gaat flashen, moet de tracker waarschijnlijk in de bootloader-modus worden gezet.
+    Meestal betekent dit het indrukken van de bootknop op het board voordat het flashproces begint.
+    Als het flashproces time-out bij het begin van het flashen, betekent dit waarschijnlijk dat de tracker niet in de bootloader-modus stond.
+    Raadpleeg de flitsinstructies van uw board om te weten hoe u de bootloader-modus inschakelt.
+firmware_tool-flash_method_ota-devices = Gedetecteerde OTA-apparaten:
+firmware_tool-flash_method_ota-no_devices = Er zijn geen boards die via OTA bijgewerkt kunnen worden, zorg ervoor dat u het juiste boardtype heeft geselecteerd.
+firmware_tool-flash_method_serial-wifi = Wi-Fi-gegevens:
+firmware_tool-flash_method_serial-devices-label = Gedetecteerde serial apparaten:
+firmware_tool-flash_method_serial-devices-placeholder = Selecteer een serieel apparaat
+firmware_tool-flash_method_serial-no_devices = Er zijn geen compatibele seriële apparaten gedetecteerd, zorg ervoor dat de tracker is aangesloten.
+firmware_tool-build_step = Aan het bouwen
+firmware_tool-build_step-description = De firmware wordt gebouwd, even geduld a.u.b.
+firmware_tool-flashing_step = Firmware aan het uploaden
+firmware_tool-flashing_step-description = Je trackers worden geflashed, volg de instructies op het scherm
+firmware_tool-flashing_step-warning-v2 = Koppel de tracker niet los en zet hem niet uit tijdens het uploadproces, tenzij dit wordt aangegeven. Dit kan je apparaat onbruikbaar maken.
+firmware_tool-flashing_step-flash_more = Flash meer trackers
+firmware_tool-flashing_step-exit = Sluit
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = De buildmap maken
+firmware_tool-build-DOWNLOADING_FIRMWARE = Firmware wordt gedownload
+firmware_tool-build-EXTRACTING_FIRMWARE = Firmware wordt uitgepakt
+firmware_tool-build-SETTING_UP_DEFINES = Configureren van de definities
+firmware_tool-build-BUILDING = Firmware wordt gebouwd
+firmware_tool-build-SAVING = De build opslaan
+firmware_tool-build-DONE = Build voltooid
+firmware_tool-build-ERROR = Kan de firmware niet bouwen
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = Firmware wordt gedownload
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = Zet je tracker uit en daarna weer aan.
+firmware_update-status-AUTHENTICATING = Authenticatie met de mcu
+firmware_update-status-UPLOADING = Firmware wordt geüpload
+firmware_update-status-SYNCING_WITH_MCU = Synchroniseren met de mcu
+firmware_update-status-REBOOTING = De update toepassen
+firmware_update-status-PROVISIONING = Wi-Fi-inloggegevens instellen
+firmware_update-status-DONE = Update voltooid!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = Kan het apparaat niet vinden
+firmware_update-status-ERROR_TIMEOUT = Er is een time-out opgetreden voor het updateproces
+firmware_update-status-ERROR_DOWNLOAD_FAILED = Kan de firmware niet downloaden
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = Kan niet verifiëren met de mcu
+firmware_update-status-ERROR_UPLOAD_FAILED = Kan de firmware niet uploaden
+firmware_update-status-ERROR_PROVISIONING_FAILED = Kan de Wi-Fi-inloggegevens niet instellen
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = De updatemethode wordt niet ondersteund
+firmware_update-status-ERROR_UNKNOWN = Onbekende fout
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = Firmware-update
+firmware_update-devices = Beschikbare apparaten
+firmware_update-devices-description = Selecteer de trackers die u wilt updaten naar de nieuwste versie van SlimeVR-firmware
+firmware_update-no_devices = Zorg er alsjeblieft voor dat de trackers die je wilt updaten AAN staan en verbonden zijn met de Wi-Fi!
+firmware_update-changelog-title = Bijwerken naar { $version }
+firmware_update-looking_for_devices = Op zoek naar apparaten om bij te werken...
+firmware_update-retry = Opnieuw
+firmware_update-update = Geselecteerde trackers bijwerken
+firmware_update-exit = Sluit
 
 ## Tray Menu
 
@@ -1023,3 +1539,53 @@ unknown_device-modal-title = Er is een nieuwe tracker gevonden!
 unknown_device-modal-description = Er is een nieuwe tracker gevonden met MAC-adres <b>{ $deviceId }</b>. Wil je deze verbinden met SlimeVR?
 unknown_device-modal-confirm = Tuurlijk!
 unknown_device-modal-forget = Negeer het
+# VRChat config warnings
+vrc_config-page-title = VRChat-configuratie waarschuwingen
+vrc_config-page-desc = Deze pagina toont de status van je VRChat-instellingen en welke instellingen niet compatibel zijn met SlimeVR. Het wordt sterk aanbevolen om eventuele waarschuwingen hier te verhelpen voor de beste gebruikservaring met SlimeVR.
+vrc_config-page-help = Kan je de instellingen niet finden?
+vrc_config-page-help-desc = Bekijk onze <a>documentatie over dit onderwerp!</a>
+vrc_config-page-big_menu = Tracking & IK (Hoofdmenu)
+vrc_config-page-big_menu-desc = IK-instellingen in het hoofdmenu
+vrc_config-page-wrist_menu = Tracking & IK (Polsmenu)
+vrc_config-page-wrist_menu-desc = IK-instellingen in het kleine polsmenu
+vrc_config-on = Aan
+vrc_config-off = Uit
+vrc_config-invalid = Je VRChat-instellingen zijn verkeerd geconfigureerd!
+vrc_config-show_more = Toon meer
+vrc_config-setting_name = Naam van de VRChat-instelling
+vrc_config-recommended_value = Aanbevolen waarde
+vrc_config-current_value = Huidige waarde
+vrc_config-mute = Waarschuwing dempen
+vrc_config-mute-btn = Dempen
+vrc_config-unmute-btn = Dempen opheffen
+vrc_config-legacy_mode = Use Legacy IK Solving
+vrc_config-disable_shoulder_tracking = Disable Shoulder Tracking
+vrc_config-shoulder_width_compensation = Shoulder Width Compensation
+vrc_config-spine_mode = FBT Spine Mode
+vrc_config-tracker_model = FBT Tracker Model
+vrc_config-avatar_measurement_type = Avatar Measurement
+vrc_config-calibration_range = Calibration Range
+vrc_config-calibration_visuals = Display Calibration Visuals
+vrc_config-user_height = User Real Height
+vrc_config-spine_mode-UNKNOWN = Onbekend
+vrc_config-spine_mode-LOCK_BOTH = Lock Both
+vrc_config-spine_mode-LOCK_HEAD = Lock Head
+vrc_config-spine_mode-LOCK_HIP = Lock Hip
+vrc_config-tracker_model-UNKNOWN = Onbekend
+vrc_config-tracker_model-AXIS = Axis
+vrc_config-tracker_model-BOX = Box
+vrc_config-tracker_model-SPHERE = Sphere
+vrc_config-tracker_model-SYSTEM = Systeem
+vrc_config-avatar_measurement_type-UNKNOWN = Onbekend
+vrc_config-avatar_measurement_type-HEIGHT = Height
+vrc_config-avatar_measurement_type-ARM_SPAN = Arm Span
+
+## Error collection consent modal
+
+error_collection_modal-title = Kunnen we fouten verzamelen?
+error_collection_modal-description_v2 =
+    { settings-interface-behavior-error_tracking-description_v2 }
+    
+    U kunt deze instelling later wijzigen in de sectie Gedrag van de instellingenpagina.
+error_collection_modal-confirm = Ik ben akkoord
+error_collection_modal-cancel = Ik wil het niet

gui/public/i18n/pl/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Łączenie z serwerem
 websocket-connection_lost = Połączenie z serwerem zostało utracone. Próba ponownego połączenia...
+websocket-connection_lost-desc = Wygląda na to, że serwer SlimeVR przestał działać. Sprawdź dzienniki i uruchom ponownie program
+websocket-timedout = Nie można połączyć się z serwerem
+websocket-timedout-desc = Wygląda na to, że serwer SlimeVR uległ awarii lub upłynął limit czasu. Sprawdź dzienniki i uruchom ponownie program
+websocket-error-close = Wyjdź ze SlimeVR
+websocket-error-logs = Otwórz folder dzienników
 
 ## Update notification
 
@@ -49,38 +54,193 @@ body_part-LEFT_HAND = Lewa dłoń
 body_part-LEFT_UPPER_LEG = Lewe udo
 body_part-LEFT_LOWER_LEG = Lewe podudzie
 body_part-LEFT_FOOT = Lewa stopa
+body_part-LEFT_THUMB_METACARPAL = Śródręcze lewego kciuka
+body_part-LEFT_THUMB_PROXIMAL = Lewy kciuk proksymalnie
+body_part-LEFT_THUMB_DISTAL = Lewy kciuk dystalnie
+body_part-LEFT_INDEX_PROXIMAL = Lewy wskazujący proksymalny
+body_part-LEFT_INDEX_INTERMEDIATE = Lewy wsakzujący pośredni
+body_part-LEFT_INDEX_DISTAL = Lewy wsakzujący dystalnie
+body_part-LEFT_MIDDLE_PROXIMAL = Lewy środkowy proksymalny
+body_part-LEFT_MIDDLE_INTERMEDIATE = Lewy środkowy pośredni
+body_part-LEFT_MIDDLE_DISTAL = Lewy środkowy dystalny
+body_part-LEFT_RING_PROXIMAL = Lewy pierścień proksymalnie
+body_part-LEFT_RING_INTERMEDIATE = Lewy pierścień pośredni
+body_part-LEFT_RING_DISTAL = Lewy pierścień dystalnie
+body_part-LEFT_LITTLE_PROXIMAL = Lewy mały proksymalnie
+body_part-LEFT_LITTLE_INTERMEDIATE = Lewy mały pośredni
+body_part-LEFT_LITTLE_DISTAL = Lewy mały dystalnie
+body_part-RIGHT_THUMB_METACARPAL = Prawy kciuk śródręcza
+body_part-RIGHT_THUMB_PROXIMAL = Prawy kciuk proksymalny
+body_part-RIGHT_THUMB_DISTAL = Prawy kciuk dystalny
+body_part-RIGHT_INDEX_PROXIMAL = Prawy indeks proksymalny
+body_part-RIGHT_INDEX_INTERMEDIATE = Prawy indeks pośredni
+body_part-RIGHT_INDEX_DISTAL = Prawy dystalny wskaźnik
+body_part-RIGHT_MIDDLE_PROXIMAL = Prawy środkowy proksymalny
+body_part-RIGHT_MIDDLE_INTERMEDIATE = Prawy środkowy pośredni
+body_part-RIGHT_MIDDLE_DISTAL = Prawy środkowy dystalny
+body_part-RIGHT_RING_PROXIMAL = Prawy pierścień proksymalny
+body_part-RIGHT_RING_INTERMEDIATE = Prawy pierścień pośredni
+body_part-RIGHT_RING_DISTAL = Prawy pierścień dystalny
+body_part-RIGHT_LITTLE_PROXIMAL = Prawy mały proksymalny
+body_part-RIGHT_LITTLE_INTERMEDIATE = Prawy mały pośredni
+body_part-RIGHT_LITTLE_DISTAL = Prawy mały dystalny
+
+## BoardType
+
+board_type-UNKNOWN = Nieznany
+board_type-NODEMCU = Kontroler NodeMCU
+board_type-CUSTOM = Płytka niestandardowa
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = Podstawa T TTGO
+board_type-ESP01 = Zobacz materiał ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = Rękawica SlimeVR Dev IMU
 
 ## Proportions
 
 skeleton_bone-NONE = Brak
 skeleton_bone-HEAD = Przesunięcie głowy
+skeleton_bone-HEAD-desc =
+    To jest odległość od headsetu do środka głowy.
+    Aby ją dostosować, obracaj głową(lewo i prawo) i edytuj wartość do momentu kiedy ruch innych urządzeń będzie minimalny.
 skeleton_bone-NECK = Długość szyi
+skeleton_bone-NECK-desc =
+    To jest odległość od środka głowy do podstawy szyi.
+    Aby go dostosować, przesuń głowę w górę i w dół, jakbyś kiwnął głową lub przechylić głowę
+    po lewej i prawej stronie i zmodyfikuj go, aż jakikolwiek ruch w innych śledzących nie będzie znikomy.
 skeleton_bone-torso_group = Długość torsu
+skeleton_bone-torso_group-desc =
+    To jest odległość od podstawy szyi do bioder.
+    Aby go dostosować, zmodyfikuj go w stojąco prosto, aż do wirtualnej linii bioder
+    Zwykle z twoimi prawdziwymi.
 skeleton_bone-UPPER_CHEST = Długość górnej części klatki piersiowej
+skeleton_bone-UPPER_CHEST-desc =
+    To jest odległość od podstawy szyi do środka klatki piersiowej.
+    Aby go dostosować, odpowiednio dostosuj długość tułowia i zmodyfikuj ją w różnych pozycjach
+    (Siedząc, pochylając się, leżąc itp.) Dopóki wirtualny kręgosłup nie pasuje do twojego prawdziwego.
 skeleton_bone-CHEST_OFFSET = Przesunięcie klatki piersiowej
+skeleton_bone-CHEST_OFFSET-desc =
+    Można to dostosować, aby przesunąć wirtualny tracker klatki piersiowej w górę lub w dół, aby pomóc
+    z kalibracją w niektórych grach lub aplikacjach, które mogą oczekiwać, że będzie wyższa lub niższa.
 skeleton_bone-CHEST = Długość klatki piersiowej
+skeleton_bone-CHEST-desc =
+    To jest odległość od środka klatki piersiowej do środka kręgosłupa.
+    Aby go dostosować, odpowiednio dostosuj długość tułowia i zmodyfikuj ją w różnych pozycjach
+    (Siedząc, pochylając się, leżąc itp.) Dopóki wirtualny kręgosłup nie pasuje do twojego prawdziwego.
 skeleton_bone-WAIST = Długość talii
+skeleton_bone-WAIST-desc =
+    To jest odległość od środka kręgosłupa do przycisku brzucha.
+    Aby go dostosować, odpowiednio dostosuj długość tułowia i zmodyfikuj ją w różnych pozycjach
+    (Siedząc, pochylając się, leżąc itp.) Dopóki wirtualny kręgosłup nie pasuje do twojego prawdziwego.
 skeleton_bone-HIP = Długość bioder
+skeleton_bone-HIP-desc =
+    To jest odległość od przycisku brzucha do bioder
+    Aby go dostosować, odpowiednio dostosuj długość tułowia i zmodyfikuj ją w różnych pozycjach
+    (Siedząc, pochylając się, leżąc itp.) Dopóki wirtualny kręgosłup nie pasuje do twojego prawdziwego.
 skeleton_bone-HIP_OFFSET = Przesunięcie bioder
+skeleton_bone-HIP_OFFSET-desc =
+    Można to dostosować, aby przesunąć wirtualny tracker bioder w górę lub w dół, aby pomóc
+    z kalibracją w niektórych grach lub aplikacjach, które mogą oczekiwać, że będzie w talii.
 skeleton_bone-HIPS_WIDTH = Szerokość bioder
+skeleton_bone-HIPS_WIDTH-desc =
+    To jest odległość między początkiem nóg.
+    Aby go dostosować, wykonaj pełny reset z nogami prosto i zmodyfikuj go aż do POW
+    Twoje wirtualne nogi pasują do twoich prawdziwych w poziomie.
 skeleton_bone-leg_group = Długość nóg
+skeleton_bone-leg_group-desc =
+    To jest odległość od bioder do stóp.
+    Aby go dostosować, odpowiednio dostosuj długość tułowia i zmodyfikuj ją
+    Dopóki twoje wirtualne stopy nie znajdą się na tym samym poziomie co twoje prawdziwe.
 skeleton_bone-UPPER_LEG = Długość górnej części nogi
+skeleton_bone-UPPER_LEG-desc =
+    To jest odległość od bioder do kolan.
+    Aby go dostosować, odpowiednio wyregentuj długość nogi i zmodyfikuj ją
+    Dopóki wirtualne kolana nie znajdą się na tym samym poziomie co twoje prawdziwe.
 skeleton_bone-LOWER_LEG = Długość dolnej części nogi
+skeleton_bone-LOWER_LEG-desc =
+    To jest odległość od twoich kolan do kostek.
+    Aby go dostosować, odpowiednio wyregentuj długość nogi i zmodyfikuj ją
+    Dopóki wirtualne kolana nie znajdą się na tym samym poziomie co twoje prawdziwe.
 skeleton_bone-FOOT_LENGTH = Długość stopy
+skeleton_bone-FOOT_LENGTH-desc =
+    To jest odległość od twoich kostek do twoich palców.
+    Aby go dostosować, na palcach i zmodyfikuj, aż twoje wirtualne stopy pozostaną na miejscu.
 skeleton_bone-FOOT_SHIFT = Przesunięcie stopy
+skeleton_bone-FOOT_SHIFT-desc =
+    Ta wartość jest poziomą odległością od kolana do kostki.
+    Opowiada o dolnych nogach cofających się, gdy stoi prosto.
+    Aby go dostosować, ustaw długość stopy na 0, wykonaj pełny reset i zmodyfikuj ją, aż do wirtualnegow
+    Stopy ustawiają się w środku kostek.
 skeleton_bone-SKELETON_OFFSET = Przesunięcie szkieletu
+skeleton_bone-SKELETON_OFFSET-desc =
+    Można to dostosować do przesunięcia wszystkich twoich trackerów do przodu lub do tyłu.
+    Można go użyć, aby pomóc w kalibracji w niektórych grach lub aplikacjach
+    To może oczekiwać, że twoi trackerzy będą bardziej naprzód.
 skeleton_bone-SHOULDERS_DISTANCE = Odległość ramion
+skeleton_bone-SHOULDERS_DISTANCE-desc =
+    To jest pionowa odległość od podstawy szyi do ramion.
+    Aby go dostosować, ustaw długość górnego ramienia na 0 i zmodyfikuj go, aż wirtualne śledzenie łokci
+    Ustaw pionowo z prawdziwymi ramionami.
 skeleton_bone-SHOULDERS_WIDTH = Szerokość ramion
+skeleton_bone-SHOULDERS_WIDTH-desc =
+    To jest pozioma odległość od podstawy szyi do ramion.
+    Aby go dostosować, ustaw długość górnego ramienia na 0 i zmodyfikuj go, aż wirtualne śledzenie łokci
+    Ustaw poziomo z prawdziwymi ramionami.
 skeleton_bone-arm_group = Długość ramienia
+skeleton_bone-arm_group-desc =
+    To jest odległość od ramion do nadgarstków.
+    Aby go dostosować, odpowiednio dostosuj odległość ramion, ustaw odległość dłoni y¶
+    do 0 i zmodyfikuj go, aż śledzące rękę nie ustawiają się na nadgarstki.
 skeleton_bone-UPPER_ARM = Długość bicepsa
+skeleton_bone-UPPER_ARM-desc =
+    To jest odległość od ramion do łokci.
+    Aby go dostosować, odpowiednio wyregentuj długość ramienia i zmodyfikuj ją do ¶
+    Twoje tropiniki łokciowe ustawiają się z twoimi prawdziwymi łokciami.
 skeleton_bone-LOWER_ARM = Długość przedramienia
+skeleton_bone-LOWER_ARM-desc =
+    To jest odległość od twoich łokci do nadgarstków.
+    Aby go dostosować, odpowiednio wyregentuj długość ramienia i zmodyfikuj ją do ¶
+    Twoje tropiniki łokciowe ustawiają się z twoimi prawdziwymi łokciami.
 skeleton_bone-HAND_Y = Odległość dłoni w osi Y
+skeleton_bone-HAND_Y-desc =
+    To jest pionowa odległość od nadgarstków do środka ręki.
+    Aby dostosować go do przechwytywania ruchu, prawidłowo dostosuj długość ramienia i zmodyfikuj ją, aż będziesz
+    Dręczniki ręczne ustawiają się pionowo z środkiem dłoni.
+    Aby dostosować go do śledzenia łokcia z kontrolerów, ustaw długość ramienia na 0 i ¶
+    Zmodyfikuj go, aż twoje urządzenia śledzące łokieć ustawiają się w pionie z nadgarstkami.
 skeleton_bone-HAND_Z = Odległość dłoni w osi Z
+skeleton_bone-HAND_Z-desc =
+    To jest pozioma odległość od nadgarstków do środka ręki.
+    Aby dostosować go do przechwytywania ruchu, ustaw go na 0.
+    Aby dostosować go do śledzenia łokcia z kontrolerów, ustaw długość ramienia na 0 i ¶
+    Zmodyfikuj go, aż twoich śledzących łokcia w sposób poziomo z nadgarstkami.
 skeleton_bone-ELBOW_OFFSET = Przesunięcie łokcia
+skeleton_bone-ELBOW_OFFSET-desc =
+    Można to dostosować, aby przesunąć wirtualne urządzenia śledzące łokieć w górę lub w dół, aby pomóc
+    z VRCHAT przypadkowo wiążącą tropiciel łokcia z klatką piersiową.
 
 ## Tracker reset buttons
 
 reset-reset_all = Zresetuj wszystkie wymiary
+reset-reset_all_warning-v2 =
+    <b> Ostrzeżenie: </b> Twoje proporcje zostaną zresetowane do wartości domyślnych skalowanych do skonfigurowanego wysokości.
+    Czy na pewno chcesz to zrobić?
+reset-reset_all_warning-reset = Zresetuj proporcje
+reset-reset_all_warning-cancel = Anuluj
+reset-reset_all_warning_default-v2 =
+    <b> Ostrzeżenie: </b> Twoja wysokość nie została skonfigurowana, twoje proporcje zostaną zresetowane do domyślnych z domyślnym wysokością.
+    Czy na pewno chcesz to zrobić?
 reset-full = Pełny Reset
 reset-mounting = Zresetuj położenie
 reset-yaw = Reset odchylenia
@@ -108,6 +268,7 @@ navbar-settings = Ustawienia
 
 bvh-start_recording = Nagraj BVH
 bvh-recording = Nagrywanie...
+bvh-save_title = Zapisz nagranie BVH
 
 ## Tracking pause
 
@@ -142,9 +303,13 @@ widget-developer_mode-more_info = Więcej info
 ## Widget: IMU Visualizer
 
 widget-imu_visualizer = Rotacja
+widget-imu_visualizer-preview = Podgląd
+widget-imu_visualizer-hide = Ukryj
 widget-imu_visualizer-rotation_raw = Raw
 widget-imu_visualizer-rotation_preview = Podgląd
-widget-imu_visualizer-rotation_hide = Ukryj
+widget-imu_visualizer-acceleration = Akceleracja
+widget-imu_visualizer-position = Pozycja
+widget-imu_visualizer-stay_aligned = Wyrównywanie
 
 ## Widget: Skeleton Visualizer
 
@@ -172,6 +337,7 @@ tracker-table-column-temperature = Temp. °C
 tracker-table-column-linear-acceleration = Akceleracja X/Y/Z
 tracker-table-column-rotation = Rotacja X/Y/Z
 tracker-table-column-position = Pozycja X/Y/Z
+tracker-table-column-stay_aligned = Wyrównywanie
 tracker-table-column-url = URL
 
 ## Tracker rotation
@@ -196,9 +362,17 @@ tracker-infos-url = Tracker URL
 tracker-infos-version = Wersja oprogramowania
 tracker-infos-hardware_rev = Rewizja sprzętu
 tracker-infos-hardware_identifier = Identyfikator sprzętu
+tracker-infos-data_support = Wsparcie danych
 tracker-infos-imu = Czujnik IMU
 tracker-infos-board_type = Płyta główna
 tracker-infos-network_version = Wersja protokołu
+tracker-infos-magnetometer = Magnetometer
+tracker-infos-magnetometer-status-v1 =
+    { $status ->
+        [DISABLED] Wyłączony
+        [ENABLED] Włączony
+       *[NOT_SUPPORTED] Nieobsługiwane
+    }
 
 ## Tracker settings
 
@@ -213,14 +387,29 @@ tracker-settings-mounting_section-edit = Edytuj
 tracker-settings-drift_compensation_section = Pozwalaj na kompensację dryfu
 tracker-settings-drift_compensation_section-description = Czy ten tracker powinien być korygowany, gdy kompensacja dryfu jest włączona?
 tracker-settings-drift_compensation_section-edit = Pozwalaj na kompensację dryfu
+tracker-settings-use_mag = Zezwól na magnetometr na tym trackerze
+# Multiline!
+tracker-settings-use_mag-description =
+    Czy ten tracker powinien używać magnetometru, aby zmniejszyć dryft, gdy użycie magnetometru jest dozwolone? <b>Proszę nie wyłączać trackera podczas przełączania tej opcji!</b> ¶
+    ¶
+    Najpierw musisz zezwolić na użycie magnetometru, <magSetting>kliknij tutaj, aby przejść do ustawienia</magSetting> .
+tracker-settings-use_mag-label = Pozwól na magnetometr
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = Nazwa Trackera
 tracker-settings-name_section-description = Daj mu słodką nazwę :)
 tracker-settings-name_section-placeholder = Lewa noga Yexo
+tracker-settings-name_section-label = Nazwa Urządzenia
 tracker-settings-forget = Zapomnij o trackerze
 tracker-settings-forget-description = Usuwa moduł śledzący z serwera SlimeVR i uniemożliwia mu połączenie się z nim do czasu ponownego uruchomienia serwera. Konfiguracja modułu śledzącego nie zostanie utracona.
 tracker-settings-forget-label = Zapomnij o trackerze
+tracker-settings-update-unavailable = Nie można zaktualizować (zrób to sam)
+tracker-settings-update-low-battery = Nie można zaktualizować. Bateria poniżej 50%
+tracker-settings-update-up_to_date = Aktualny
+tracker-settings-update-blocked = Aktualizacja niedostępna. Brak innych wersji
+tracker-settings-update-available = Wersja { $versionName } jest już dostępna
+tracker-settings-update = Zaktualizuj teraz
+tracker-settings-update-title = Wersja oprogramowania
 
 ## Tracker part card info
 
@@ -287,6 +476,7 @@ mounting_selection_menu-close = Zamknij
 settings-sidebar-title = Ustawienia
 settings-sidebar-general = Ogólne
 settings-sidebar-tracker_mechanics = Mechanika trackerów
+settings-sidebar-stay_aligned = Wyrównywanie
 settings-sidebar-fk_settings = Ustawienia śledzenia
 settings-sidebar-gesture_control = Sterowanie gestami
 settings-sidebar-interface = Interfejs
@@ -296,6 +486,10 @@ settings-sidebar-utils = Narzędzia
 settings-sidebar-serial = Konsola szeregowa
 settings-sidebar-appearance = Wygląd
 settings-sidebar-notifications = Powiadomienia
+settings-sidebar-behavior = Zachowanie
+settings-sidebar-firmware-tool = Narzędzie do oprogramowania sprzętowego DIY
+settings-sidebar-vrc_warnings = Ostrzeżenia dotyczące konfiguracji VRChat
+settings-sidebar-advanced = Zaawansowany
 
 ## SteamVR settings
 
@@ -350,6 +544,20 @@ settings-general-tracker_mechanics-drift_compensation-description =
     Kompensuje dryf odchylenia IMU poprzez zastosowanie odwrotnej rotacji.
     Zmień wysokość kompensacji i do ilu resetów jest branych pod uwagę.
 settings-general-tracker_mechanics-drift_compensation-enabled-label = Kompensacja dryfu
+settings-general-tracker_mechanics-drift_compensation-prediction = Przewidywanie kompensacji dryfu
+# This cares about multilines
+settings-general-tracker_mechanics-drift_compensation-prediction-description =
+    Przewiduje kompensację dryfu odchylenia poza wcześniej zmierzony zakres.¶
+    Włącz tę opcję, jeśli trackery stale obracają się wokół osi odchylenia.
+settings-general-tracker_mechanics-drift_compensation-prediction-label = Przewidywanie kompensacji dryfu
+settings-general-tracker_mechanics-drift_compensation_warning =
+    <b>Ostrzeżenie:</b> Kompensacji dryftu używaj tylko wtedy, gdy chcesz zresetować¶
+    bardzo często (co 5-10 minut).¶
+    ¶
+    Niektóre IMU podatne na częste resetowanie obejmują:¶
+    Joy-Cons, owoTrack i MPU (bez najnowszego oprogramowania).
+settings-general-tracker_mechanics-drift_compensation_warning-cancel = Anuluj
+settings-general-tracker_mechanics-drift_compensation_warning-done = Rozumiem
 settings-general-tracker_mechanics-drift_compensation-amount-label = Ilość kompensacji
 settings-general-tracker_mechanics-drift_compensation-max_resets-label = Użyj maksymalnie x ostatnich resetów
 settings-general-tracker_mechanics-save_mounting_reset = Zapisz pozycję trackerów na ciele
@@ -357,6 +565,30 @@ settings-general-tracker_mechanics-save_mounting_reset-description =
     Zapisuje kalibrację pozycji trackerów na ciele pomiędzy ponownymi uruchomieniami. Użyteczne¶
     podczas noszenia stroju, w którym trackery przymocowane sa na stałe. <b>Niezalecane dla zwykłych użytkowników z odpinanymi trackerami!</b>
 settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Zapisz pozycję trackerów
+settings-general-tracker_mechanics-use_mag_on_all_trackers = Użyj magnetometru na wszystkich trackerach IMU, które go obsługują
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    Wykorzystuje magnetometr we wszystkich trackerach, które mają kompatybilne oprogramowanie sprzętowe, redukując dryf w stabilnych środowiskach magnetycznych.¶
+    Można wyłączyć dla każdego modułu śledzącego w ustawieniach modułu śledzącego. <b>Proszę nie wyłączać żadnego modułu śledzącego podczas przełączania!</b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Użyj magnetometru na trackerach
+settings-stay_aligned = Wyrównywanie
+settings-stay_aligned-description = Wyrównywanie zmniejsza efekt driftu, stopniowo dostosowując trackery do twoich zrelaksowanych póz.
+settings-stay_aligned-setup-label = Konfiguracja Opcji Wyrównywania
+settings-stay_aligned-setup-description = Musisz ukończyć konfigurację, aby włączyć opcję Wyrównywania.
+settings-stay_aligned-warnings-drift_compensation = ⚠ Wyłącz kompensację Driftu, będzie ona kolidować z opcją Wyrównywania!
+settings-stay_aligned-enabled-label = Dostosuj trackery
+settings-stay_aligned-hide_yaw_correction-label = Ukryj dopasowanie (do porównania bez opcji Wyrównywania)
+settings-stay_aligned-general-label = Ogólne
+settings-stay_aligned-relaxed_poses-label = Zrelaksowane pozy
+settings-stay_aligned-relaxed_poses-description = Opcja Wyrównywania wykorzystuje Twoje zrelaksowane pozy, aby utrzymać trackery w jednej linii. Użyj opcji "Konfiguracja Opcji Wyrównywania", aby zaktualizować te pozy.
+settings-stay_aligned-relaxed_poses-standing = Dostosuj trackery w pozycji stojącej
+settings-stay_aligned-relaxed_poses-sitting = Dostosuj trackery, siedząc na krześle
+settings-stay_aligned-relaxed_poses-flat = Dostosuj trackery, siedząc na podłodze lub leżąc na plecach
+settings-stay_aligned-relaxed_poses-save_pose = Zapisz pozę
+settings-stay_aligned-relaxed_poses-reset_pose = Zresetuj Pozycję
+settings-stay_aligned-relaxed_poses-close = Zamknij
+settings-stay_aligned-debug-label = Debugowanie
+settings-stay_aligned-debug-description = Proszę dołączać ustawienia, podczas zgłaszania problemów z opcją Wyrównywania.
+settings-stay_aligned-debug-copy-label = Skopiuj ustawienia do schowka
 
 ## FK/Tracking settings
 
@@ -380,6 +612,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = Foot-plant obrac
 settings-general-fk_settings-leg_fk = Śledzenie nóg
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Włącz resetowanie montażu stóp, chodząc na palcach.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Reset mocowania stóp
+settings-general-fk_settings-enforce_joint_constraints = Limity szkieletowe
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Wymuszanie ograniczeń
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Zapobiega obracaniu się stawów poza ich limit
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Korygowanie za pomocą ograniczeń
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Koryguj rotacje stawów, gdy przekraczają swój limit
 settings-general-fk_settings-arm_fk = Śledzenie ramienia
 settings-general-fk_settings-arm_fk-description = Zmień sposób śledzenia ramion.
 settings-general-fk_settings-arm_fk-force_arms = Śledź ramiona z gogli VR
@@ -411,9 +648,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Uśre
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Średnie odchylenie kolan i przechylenie kostek
 settings-general-fk_settings-self_localization-title = Tryb Mocap
 settings-general-fk_settings-self_localization-description = Tryb Mocap pozwala szkieletowi z grubsza śledzić własną pozycję bez headsetu lub innych trackerów. Pamiętaj, że wymaga to śledzenia stóp i głowy do działania i nadal jest eksperymentalne.
-settings-general-fk_settings-vive_emulation-title = Emulacja Vive
-settings-general-fk_settings-vive_emulation-description = Naśladuj problemy z trackerem talii, które mają trackery Vive. To żart i pogarsza śledzenie.
-settings-general-fk_settings-vive_emulation-label = Włącz emulację Vive
 
 ## Gesture control settings (tracker tapping)
 
@@ -458,6 +692,9 @@ settings-general-interface-dev_mode = Tryb Dewelopera
 settings-general-interface-dev_mode-description = Ten tryb przydaje się do sprawdzania większej ilości danych.
 settings-general-interface-dev_mode-label = Tryb Dewelopera
 settings-general-interface-theme = Motyw kolorystyczny
+settings-general-interface-show-navbar-onboarding = Pokaż „{ navbar-onboarding }” na pasku nawigacyjnym
+settings-general-interface-show-navbar-onboarding-description = Zmienia się to, jeśli na pasku nawigacyjnym pojawi się przycisk „{ navbar-onboarding }”.
+settings-general-interface-show-navbar-onboarding-label = Pokaż „{ navbar-onboarding }”
 settings-general-interface-lang = Wybierz Język
 settings-general-interface-lang-description = Zmień podstawowy język jaki chcesz używać
 settings-general-interface-lang-placeholder = Wybierz język, który będziesz używać
@@ -469,6 +706,9 @@ settings-interface-appearance-font-os_font = Czcionka systemu operacyjnego
 settings-interface-appearance-font-slime_font = Domyślna czcionka
 settings-interface-appearance-font_size = Skalowanie czcionki
 settings-interface-appearance-font_size-description = Wpływa to na rozmiar czcionki całego interfejsu z wyjątkiem tego panelu ustawień
+settings-interface-appearance-decorations = Skorzystaj z natywnych dekoracji systemowych
+settings-interface-appearance-decorations-description = Nie spowoduje to wyrenderowania górnego paska interfejsu i zamiast tego użyje paska systemu operacyjnego.
+settings-interface-appearance-decorations-label = Użyj domyślnych dekoracji
 
 ## Notification settings
 
@@ -483,6 +723,13 @@ settings-general-interface-feedback_sound-volume = Poziom głośności dzwięku
 settings-general-interface-connected_trackers_warning = Ostrzeżenie o podłączonych trackerach
 settings-general-interface-connected_trackers_warning-description = Ta opcja wyświetli wyskakujące okienko za każdym razem, gdy spróbujesz wyjść ze SlimeVR, mając jeden lub więcej podłączonych trackerów. Przypomina o wyłączeniu trackerów, gdy skończysz, aby wydłużyć żywotność baterii.
 settings-general-interface-connected_trackers_warning-label = Ostrzeżenie o podłączonych trackerach przy wyjściu
+
+## Behavior settings
+
+settings-interface-behavior = Zachowanie
+settings-general-interface-dev_mode = Tryb Dewelopera
+settings-general-interface-dev_mode-description = Ten tryb przydaje się do sprawdzania większej ilości danych.
+settings-general-interface-dev_mode-label = Tryb Dewelopera
 settings-general-interface-use_tray = Minimalizuj do zasobnika systemowego
 settings-general-interface-use_tray-description = Pozwala zamknąć okno bez wyłączania serwera SlimeVR, aby używać trackerów bez interfejsu graficznego.
 settings-general-interface-use_tray-label = Minimalizuj do zasobnika systemowego
@@ -496,6 +743,17 @@ settings-general-interface-discord_presence-message =
         [few] Używanie { $amount } trackerów
        *[many] Używanie { $amount } trackerów
     }
+settings-interface-behavior-error_tracking = Zbieranie błędów za pomocą Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Czy wyrażasz zgodę na gromadzenie anonimowych danych o błędach?</h1>
+    
+    <b>Nie gromadzimy danych osobowych</b> , takich jak adres IP lub dane uwierzytelniające sieci bezprzewodowej. SlimeVR ceni Twoją prywatność!
+    
+    Aby zapewnić jak najlepsze wrażenia użytkownika, gromadzimy anonimowe raporty o błędach, wskaźniki wydajności i informacje o systemie operacyjnym. Pomaga nam to wykrywać błędy i problemy ze SlimeVR. Dane te są zbierane za pomocą Sentry.io.
+settings-interface-behavior-error_tracking-label = Wysyłanie błędów do deweloperów
+settings-interface-behavior-bvh_directory = Ścieżka do zapisywania nagrań BVH
+settings-interface-behavior-bvh_directory-description = Wybierz ścieżkę domyślną, w której chcesz zapisywać nagrania BVH.
+settings-interface-behavior-bvh_directory-label = Ścieżka do nagrań BVH
 
 ## Serial settings
 
@@ -549,9 +807,23 @@ settings-osc-router-network-address-placeholder = IPV4 address
 ## OSC VRChat settings
 
 settings-osc-vrchat = VRChat OSC Trackers
+# This cares about multilines
+settings-osc-vrchat-description-v1 =
+    Zmień ustawienia specyficzne dla standardu OSC Trackers używanego do wysyłania¶
+    śledzenie danych do aplikacji bez SteamVR (np. samodzielny Quest).¶
+    Upewnij się, że włączyłeś OSC w VRChat poprzez menu akcji w opcji OSC włączone.¶
+    Aby zezwolić na odbieranie danych HMD i kontrolera z VRChat, przejdź do menu głównego¶
+    ustawienia w obszarze Śledzenie i IK Zezwalaj na wysyłanie danych OSC śledzenia głowy i nadgarstka VR.
 settings-osc-vrchat-enable = Zezwól
 settings-osc-vrchat-enable-description = Zezwól na wysyłanie i odbieranie danych.
 settings-osc-vrchat-enable-label = Zezwól
+settings-osc-vrchat-oscqueryEnabled = Włącz OSCQuery
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery automatycznie wykrywa uruchomione instancje VRChat i wysyła im dane.
+    Może również reklamować się do nich w celu otrzymania danych HMD i administratora.
+    Aby zezwolić na odbieranie danych HMD i kontrolera z VRChat, przejdź do ustawień menu głównego
+    w sekcji "Tracking & IK" i włącz opcję "Zezwalaj na wysyłanie danych OSC śledzenia głowy i nadgarstka VR".
+settings-osc-vrchat-oscqueryEnabled-label = Włącz OSCQuery
 settings-osc-vrchat-network = Porty sieciowe
 settings-osc-vrchat-network-description-v1 = Ustaw porty do odbierania i wysyłania danych. Nie trzeba tego zmieniać dla VRChata.
 settings-osc-vrchat-network-port_in =
@@ -594,12 +866,7 @@ settings-osc-vmc-network-address-description = Wybierz adres, na który chcesz w
 settings-osc-vmc-network-address-placeholder = IPV4 adres
 settings-osc-vmc-vrm = Model VRM
 settings-osc-vmc-vrm-description = Załaduj model VRM, aby umożliwić zablokowanie głowy i zapewnić większą kompatybilność z innymi aplikacjami
-settings-osc-vmc-vrm-model_unloaded = Nie załadowano modelu
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Model załadowany: { $name }
-       *[other] Załadowano model bez nazwy
-    }
+settings-osc-vmc-vrm-untitled_model = Model bez nazwy
 settings-osc-vmc-vrm-file_select = Przeciągnij i upuść model, którego chcesz użyć, lub <u>przeglądaj</u>
 settings-osc-vmc-anchor_hip = Blokada na biodrach
 settings-osc-vmc-anchor_hip-description = Zablokuj śledzenie na biodrach, przydatne podczas siedzenia VTubing. W przypadku wyłączenia załaduj model VRM.
@@ -608,6 +875,35 @@ settings-osc-vmc-mirror_tracking = Odbicie lustrzane śledzenia
 settings-osc-vmc-mirror_tracking-description = Odbij śledzenie w poziomie.
 settings-osc-vmc-mirror_tracking-label = Odbicie lustrzane śledzenia
 
+## Advanced settings
+
+settings-utils-advanced = Zaawansowany
+settings-utils-advanced-reset-gui = Zresetuj ustawienia GUI
+settings-utils-advanced-reset-gui-description = Przywróć domyślne ustawienia interfejsu.
+settings-utils-advanced-reset-gui-label = Zresetuj GUI
+settings-utils-advanced-reset-server = Zresetuj ustawienia śledzenia
+settings-utils-advanced-reset-server-description = Przywróć domyślne ustawienia śledzenia.
+settings-utils-advanced-reset-server-label = Zresetuj śledzenie
+settings-utils-advanced-reset-all = Zresetuj wszystkie ustawienia
+settings-utils-advanced-reset-all-description = Przywróć ustawienia domyślne interfejsu i śledzenia.
+settings-utils-advanced-reset-all-label = Zresetuj wszystko
+settings-utils-advanced-reset_warning =
+    { $type ->
+        [gui] <b>Ostrzeżenie:</b> Spowoduje to przywrócenie ustawień domyślnych interfejsu GUI.¶
+        [server] <b>Ostrzeżenie:</b>Spowoduje to przywrócenie domyślnych ustawień śledzenia.¶
+       *[all]
+            <b>Ostrzeżenie:</b> Spowoduje to zresetowanie wszystkich ustawień do wartości domyślnych.¶
+            Czy na pewno chcesz to zrobić?
+    }
+settings-utils-advanced-reset_warning-reset = Zresetuj ustawienia
+settings-utils-advanced-reset_warning-cancel = Anuluj
+settings-utils-advanced-open_data-v1 = Folder konfiguracyjny
+settings-utils-advanced-open_data-description-v1 = Otwórz folder konfiguracyjny SlimeVR w eksploratorze plików, zawierający konfigurację
+settings-utils-advanced-open_data-label = Otwórz folder
+settings-utils-advanced-open_logs = Folder dzienników
+settings-utils-advanced-open_logs-description = Otwórz folder dzienników SlimeVR w eksploratorze plików, zawierający dzienniki aplikacji
+settings-utils-advanced-open_logs-label = Otwórz folder
+
 ## Setup/onboarding menu
 
 onboarding-skip = Pomiń wstępną konfiguracje
@@ -633,6 +929,7 @@ onboarding-wifi_creds-submit = Potwierdź!
 onboarding-wifi_creds-ssid =
     .label = SSID
     .placeholder = Enter SSID
+onboarding-wifi_creds-ssid-required = Nazwa Wi-Fi jest wymagana
 onboarding-wifi_creds-password =
     .label = Password
     .placeholder = Enter password
@@ -690,12 +987,24 @@ onboarding-connect_tracker-issue-serial = Mam problemy z połączeniem!
 onboarding-connect_tracker-usb = USB Tracker
 onboarding-connect_tracker-connection_status-none = Szukanie Trackerów
 onboarding-connect_tracker-connection_status-serial_init = Łączenie z urządzeniem szeregowym
+onboarding-connect_tracker-connection_status-obtaining_mac_address = Uzyskiwanie adresu MAC modułu śledzącego
 onboarding-connect_tracker-connection_status-provisioning = Wysyłanie danych Wi-Fi
 onboarding-connect_tracker-connection_status-connecting = Wysyłanie danych Wi-Fi
 onboarding-connect_tracker-connection_status-looking_for_server = Szukanie serwera
 onboarding-connect_tracker-connection_status-connection_error = Nie można połączyć się z Wi-Fi
 onboarding-connect_tracker-connection_status-could_not_find_server = Nie można znaleźć serwera
 onboarding-connect_tracker-connection_status-done = Połączono z serwerem
+onboarding-connect_tracker-connection_status-no_serial_log = Nie można pobrać dzienników z modułu śledzącego
+onboarding-connect_tracker-connection_status-no_serial_device_found = Nie można znaleźć lokalizatora z USB
+onboarding-connect_serial-error-modal-no_serial_log = Czy tracker jest włączony?
+onboarding-connect_serial-error-modal-no_serial_log-desc = Upewnij się, że tracker jest włączony i podłączony do komputera
+onboarding-connect_serial-error-modal-no_serial_device_found = Nie wykryto trackerów
+onboarding-connect_serial-error-modal-no_serial_device_found-desc =
+    Podłącz tracker za pomocą dostarczonego USB do komputera i włącz tracker.
+    Jeśli to nie zadziała:
+      - Spróbuj użyć innego USB
+      - Spróbuj użyć innego portu USB
+      - spróbuj ponownie zainstalować serwer SlimeVR i wybierz "Sterowniki USB" w sekcji komponentów
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -715,12 +1024,13 @@ onboarding-connect_tracker-next = Połączyłem już wszystkie trackery
 
 onboarding-calibration_tutorial = Samouczek kalibracji IMU
 onboarding-calibration_tutorial-subtitle = Pomoże to ograniczyć dryf trackera!
-onboarding-calibration_tutorial-description = Za każdym razem, gdy włączasz trackery, muszą one chwilę polerzeć na płaskiej powierzchni, aby się skalibrować. Zróbmy to samo, klikając przycisk „Kalibruj”, <b>nie ruszaj ich!</b>
+onboarding-calibration_tutorial-description-v1 = Po włączeniu trackerów umieść je na chwilę na stabilnej powierzchni, aby umożliwić kalibrację. Kalibrację można przeprowadzić w dowolnym momencie po włączeniu trackerów - ta strona zawiera po prostu samouczek. Aby rozpocząć, kliknij przycisk "{ onboarding-calibration_tutorial-calibrate }", a następnie <b>nie ruszaj swoich trackerów!</b>
 onboarding-calibration_tutorial-calibrate = Położyłem trackery na stole
 onboarding-calibration_tutorial-status-waiting = Czekam na Ciebie
 onboarding-calibration_tutorial-status-calibrating = Kalibracja
 onboarding-calibration_tutorial-status-success = Nieźle!
 onboarding-calibration_tutorial-status-error = Tracker został przeniesiony
+onboarding-calibration_tutorial-skip = Pomiń samouczek
 
 ## Tracker assignment tutorial
 
@@ -847,11 +1157,11 @@ onboarding-choose_mounting = Jakiej metody kalibracji montażu użyć?
 # Multiline text
 onboarding-choose_mounting-description = Orientacja montażu koryguje umieszczenie trackerów na ciele.
 onboarding-choose_mounting-auto_mounting = Automatyczne mocowanie
-# Italized text
+# Italicized text
 onboarding-choose_mounting-auto_mounting-label-v2 = Zalecane
 onboarding-choose_mounting-auto_mounting-description = To automatycznie wykryje kierunki montażu dla wszystkich twoich trackerów z 2 pozycji
 onboarding-choose_mounting-manual_mounting = Montaż ręczny
-# Italized text
+# Italicized text
 onboarding-choose_mounting-manual_mounting-label-v2 = Może nie być wystarczająco dokładne
 onboarding-choose_mounting-manual_mounting-description = Umożliwi to ręczne wybranie kierunku montażu dla każdego trackera
 # Multiline text
@@ -885,44 +1195,27 @@ onboarding-automatic_mounting-mounting_reset-title = Kalibracja Pozycji
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Zrób pozycje "na Małysza" z wygiętymi nogami, tułowiem pochylonym do przodu z wygiętymi rękami.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Naciśnij "Zresetuj Położenie" i poczekaj 3 sekundy zanim trackery się zresetują.
 onboarding-automatic_mounting-preparation-title = Przygotowania
-onboarding-automatic_mounting-preparation-step-0 = 1. Stań prosto z rękami wyciągniętymi na bok.
-onboarding-automatic_mounting-preparation-step-1 = 2. Naciśnij "Reset" i poczekaj 3 sekundy zanim trackery się zresetują.
+onboarding-automatic_mounting-preparation-v2-step-0 = 1. Naciśnij przycisk "Pełny reset".
+onboarding-automatic_mounting-preparation-v2-step-1 = 2. Stań prosto z rękami po bokach. Upewnij się, że patrzysz przed siebie.
+onboarding-automatic_mounting-preparation-v2-step-2 = 3. Utrzymaj pozycję, aż skończy się 3-sekundowy timer.
 onboarding-automatic_mounting-put_trackers_on-title = Załóż trackery
 onboarding-automatic_mounting-put_trackers_on-description = Aby skalibrować rotacje, użyjemy trackerów które przypisano przed chwilą. Załóż wszystkie trackery, możesz je odróznić na postaci po prawej.
 onboarding-automatic_mounting-put_trackers_on-next = Wszystkie trackery założone
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = Jakiej metody kalibracji proporcji użyć?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    Proporcje ciała służą do określenia wymiarów Twojego ciała. Są niezbędne do obliczenia właściwej pozycji trackerów.¶
-    Gdy proporcje Twojego ciała nie będą odpowiadać zapisanym, Twoja precyzja śledzenia będzie gorsza i zauważysz takie problemy jak niedopasowanie awatara do Twojego ciała, efekt jazdy na łyżwach i ślizgania się.¶
-    <b>Wystarczy zmierzyć swoje ciało tylko raz!</b> O ile proporcje są poprawne i Twoje ciało się nie zmieniło, nie musisz powtarzać żadnych pomiarów.
-onboarding-choose_proportions-auto_proportions = Proporcje automatyczne
-# Italized text
-onboarding-choose_proportions-auto_proportions-subtitle = Zalecana
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Spowoduje to estymację Twoich proporcji poprzez zarejestrowanie nagrania Twoich ruchów i przetworzenie ich przez algorytm.¶
-    ¶
-    <b>Wymaga to podłączenia headsetu (HMD) do SlimeVR i założenia go na głowę!</b>
-onboarding-choose_proportions-manual_proportions = Ręczne proporcje
-# Italized text
-onboarding-choose_proportions-manual_proportions-subtitle = Drobne detale
-onboarding-choose_proportions-manual_proportions-description = Umożliwi to ręczne dostosowanie proporcji poprzez ich bezpośrednią modyfikację
-onboarding-choose_proportions-export = Eksportuj proporcje
-onboarding-choose_proportions-import = Importuj proporcje
-onboarding-choose_proportions-import-success = Importowane
-onboarding-choose_proportions-import-failed = Niepowodzenie
-onboarding-choose_proportions-file_type = Proporcje ciała
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Wróć do samouczka resetowania
 onboarding-manual_proportions-title = Manualne Proporcje Ciała
-onboarding-manual_proportions-precision = Precyzyjna Regulacja
-onboarding-manual_proportions-auto = Automatyczna Kalibracja
-onboarding-manual_proportions-ratio = Dostosuj według grup proporcji
+onboarding-manual_proportions-fine_tuning_button = Automatyczne dostrajanie proporcji
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Podłącz gogle VR, aby korzystać z automatycznego dostrajania
+onboarding-manual_proportions-export = Eksportuj proporcje
+onboarding-manual_proportions-import = Importuj proporcje
+onboarding-manual_proportions-file_type = Proporcje ciała
+onboarding-manual_proportions-normal_increment = Normalny przyrost
+onboarding-manual_proportions-precise_increment = Precyzyjny przyrost
+onboarding-manual_proportions-grouped_proportions = Zgrupowane proporcje
+onboarding-manual_proportions-all_proportions = Wszystkie proporcje
+onboarding-manual_proportions-estimated_height = Szacowany wzrost użytkownika
 
 ## Tracker automatic proportions setup
 
@@ -943,21 +1236,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Twój headset raportuje dane o pozycji do serwera SlimeVR (zazwyczaj oznacza to, że SteamVR jest uruchomiony i podłączony do SlimeVR za pomocą sterownika SteamVR SlimeVR).¶
     Twoje śledzenie działa i dokładnie odzwierciedla Twoje ruchy (wykonałeś pełny reset i poruszają się we właściwym kierunku podczas kopania, schylania się, siedzenia itp.).
 onboarding-automatic_proportions-requirements-next = Zapoznałem się z wymaganiami
-onboarding-automatic_proportions-check_height-title = Sprawdź swój wzrost
-onboarding-automatic_proportions-check_height-description = Używamy Twojego wzrostu jako podstawy naszych pomiarów, używając wzrostu HMD jako przybliżenia Twojego rzeczywistego wzrostu, ale lepiej samemu sprawdzić, czy są prawidłowe!
+onboarding-automatic_proportions-check_height-title-v3 = Zmierz wysokość headsetu
+onboarding-automatic_proportions-check_height-description-v2 = Wysokość headsetu (HMD) powinna być nieco mniejsza niż pełny wzrost, ponieważ headset mierzy wysokość oczu. Pomiar ten zostanie wykorzystany jako punkt odniesienia dla proporcji Twojego ciała.
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Naciśnij przycisk stojąc <u>wyprostowany</u>, aby obliczyć swój wzrost. Masz 3 sekundy po naciśnięciu przycisku!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Rozpocznij pomiar, stojąc <u>prosto</u> , aby zmierzyć swój wzrost. Uważaj, aby nie podnosić rąk wyżej niż headset, ponieważ mogą one wpłynąć na pomiar!
 onboarding-automatic_proportions-check_height-guardian_tip =
     Jeśli korzystasz z samodzielnego zestawu VR, upewnij się, że twoja granica¶
     bezpieczeństwa (guardian) jest włączona, aby poprawnie rozpoznać Twój wzrost!
-onboarding-automatic_proportions-check_height-fetch_height = Stoję!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Nieznany
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = Twoja wysokość HMD to
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = więc twój rzeczywisty wzrost to
+onboarding-automatic_proportions-check_height-hmd_height2 = Wysokość headsetu wynosi:
+onboarding-automatic_proportions-check_height-measure-start = Rozpocznij pomiar
+onboarding-automatic_proportions-check_height-measure-stop = Przestań mierzyć
+onboarding-automatic_proportions-check_height-measure-reset = Ponawianie próby pomiaru
 onboarding-automatic_proportions-check_height-next_step = Są w porządku
+onboarding-automatic_proportions-check_floor_height-title = Zmierz wysokość podłogi (opcjonalnie)
+onboarding-automatic_proportions-check_floor_height-description = W niektórych przypadkach wysokość podłogi może nie być prawidłowo ustawiona przez headset, co powoduje, że wysokość headsetu jest mierzona jako wyższa niż powinna. Możesz zmierzyć "wysokość" podłogi, aby skorygować wysokość headsetu.
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Rozpocznij pomiar i przyłóż kontroler do podłogi, aby zmierzyć jej wysokość. Jeśli masz pewność, że wysokość podłogi jest prawidłowa, możesz pominąć ten krok.
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = Wysokość podłogi wynosi:
+onboarding-automatic_proportions-check_floor_height-full_height = Twój szacowany pełny wzrost to:
+onboarding-automatic_proportions-check_floor_height-measure-start = Rozpocznij pomiar
+onboarding-automatic_proportions-check_floor_height-measure-stop = Przestań mierzyć
+onboarding-automatic_proportions-check_floor_height-measure-reset = Ponawianie próby pomiaru
+onboarding-automatic_proportions-check_floor_height-skip_step = Pomiń krok i zapisz
+onboarding-automatic_proportions-check_floor_height-next_step = Wykorzystaj wysokość podłogi i zaoszczędź
 onboarding-automatic_proportions-start_recording-title = Bądź gotowy żeby się ruszać
 onboarding-automatic_proportions-start_recording-description = Będziemy teraz nagrywać specyficzne pozycje i ruchy. Będą one pokazane w następnym okienku. Bądź gotowy po naciśnięciu przycisku!
 onboarding-automatic_proportions-start_recording-next = Uruchom nagrywanie
@@ -989,10 +1294,74 @@ onboarding-automatic_proportions-verify_results-redo = Powtórz nagranie
 onboarding-automatic_proportions-verify_results-confirm = Wyniki prawidłowe
 onboarding-automatic_proportions-done-title = Zmierzono oraz zapisano.
 onboarding-automatic_proportions-done-description = Twoja kalibracja ciała została zakończona!
-onboarding-automatic_proportions-error_modal =
-    <b>Ostrzeżenie:</b> Wykryto błąd podczas szacowania proporcji!
-    Proszę <docs>sprawdź dokumentację</docs> lub dołącz do naszego <discord>Discord</discord>, aby uzyskać pomoc ^_^
+onboarding-automatic_proportions-error_modal-v2 =
+    <b>Uwaga:</b> Wystąpił błąd podczas szacowania proporcji!¶
+    Jest to prawdopodobnie problem z kalibracją montażu. Zanim spróbujesz ponownie, upewnij się, że śledzenie działa prawidłowo.¶
+    Proszę, <docs>dokumentacja sprawdź dokumenty</docs> lub dołącz do naszego <discorda>Discord</discord>, aby uzyskać pomoc^_^
 onboarding-automatic_proportions-error_modal-confirm = Zrozumiano!
+onboarding-automatic_proportions-smol_warning =
+    Skonfigurowana wysokość { $height } jest mniejsza niż minimalna akceptowana wysokość { $minHeight }.
+    <b>Powtórz pomiary i upewnij się, że są prawidłowe.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Przejdź wstecz
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = Skalowane proporcje
+onboarding-scaled_proportions-description = Aby SlimeVR działało poprawnie, musimy znać długość twoich kości. Ta kalibracja zrobi to za ciebie.
+onboarding-scaled_proportions-manual_height-title = Skonfiguruj swój wzrost
+onboarding-scaled_proportions-manual_height-description-v2 = Ta wysokość zostanie wykorzystana jako linia bazowa dla proporcji Twojego ciała.
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR nie jest obecnie połączony ze SlimeVR, więc pomiary nie mogą być oparte na goglach. <b>Kontynuuj na własne ryzyko lub sprawdź dokumenty!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = Twój wzrost to
+onboarding-scaled_proportions-manual_height-estimated_height = Szacowana wysokość headsetu to:
+onboarding-scaled_proportions-manual_height-next_step = Kontynuuj i zapisz
+onboarding-scaled_proportions-manual_height-warning =
+    Obecnie korzystasz z ręcznego sposobu ustawiania proporcji w skali rozgrywki!
+    <b>Ten tryb jest zalecany tylko wtedy, gdy nie używasz gogli ze SlimeVR</b>
+    
+    Aby móc korzystać z automatycznie skalowanych proporcji, należy:
+onboarding-scaled_proportions-manual_height-warning-no_hmd = Podłącz gogle VR
+onboarding-scaled_proportions-manual_height-warning-no_controllers = Upewnij się, że kontrolery są podłączone i prawidłowo przypisane do Twoich rąk
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = Zresetuj wszystkie wymiary
+onboarding-scaled_proportions-reset_proportion-description = Aby ustawić proporcje ciała na podstawie wzrostu, musisz teraz zresetować wszystkie proporcje. Spowoduje to wyczyszczenie wszystkich skonfigurowanych proporcji i zapewnienie konfiguracji bazowej.
+onboarding-scaled_proportions-done-title = Proporcje Ciała
+onboarding-scaled_proportions-done-description = Proporcje Twojego ciała powinny być teraz skonfigurowane w oparciu o Twój wzrost.
+
+## Stay Aligned setup
+
+onboarding-stay_aligned-title = Wyrównywanie
+onboarding-stay_aligned-description = Skonfiguruj opcję Wyrównywania, aby Twoje trackery były wyrównane.
+onboarding-stay_aligned-put_trackers_on-title = Załóż trackery
+onboarding-stay_aligned-put_trackers_on-description = Aby skalibrować proporcje, użyjemy trackerów które przed chwilą przypisałeś. Załóż wszystkie trackery, będziesz widział który to który na postaci po prawej.
+onboarding-stay_aligned-put_trackers_on-trackers_warning = Masz mniej niż 5 trackerów aktualnie podłączonych i przypisanych! Jest to minimalna liczba elementów śledzących wymaganych do prawidłowego działania opcji Wyrównywania.
+onboarding-stay_aligned-put_trackers_on-next = Mam wszystkie trackery założone
+onboarding-stay_aligned-verify_mounting-title = Sprawdź swój montaż
+onboarding-stay_aligned-verify_mounting-step-0 = Opcja Wyrównywania wymaga stabilnego mocowania trackera. W innym przypadku będziesz miał złe rezultaty.
+onboarding-stay_aligned-verify_mounting-step-1 = 1. Poruszaj się podczas stania.
+onboarding-stay_aligned-verify_mounting-step-2 = 2. Usiądź i poruszaj nogami i stopami.
+onboarding-stay_aligned-verify_mounting-step-3 = 3. Jeśli Twoje trackery nie znajdują się we właściwym miejscu, naciśnij "Ponów kalibrację montażu".
+onboarding-stay_aligned-verify_mounting-redo_mounting = Ponów kalibrację montażu
+onboarding-stay_aligned-preparation-title = Przygotowania
+onboarding-stay_aligned-preparation-tip = Upewnij się, że stoisz prosto. Patrz przed siebie z rękami opuszczonymi po bokach.
+onboarding-stay_aligned-relaxed_poses-standing-title = Zrelaksowana pozycja stojąca
+onboarding-stay_aligned-relaxed_poses-standing-step-0 = 1. Stań w wygodnej pozycji. Zrelaksuj się!
+onboarding-stay_aligned-relaxed_poses-standing-step-1-v2 = 2. Naciśnij przycisk "Zapisz pozę".
+onboarding-stay_aligned-relaxed_poses-sitting-title = Zrelaksowana pozycja siedząca na krześle
+onboarding-stay_aligned-relaxed_poses-sitting-step-0 = 1. Usiądź w wygodnej pozycji. Zrelaksuj się!
+onboarding-stay_aligned-relaxed_poses-sitting-step-1-v2 = 2. Naciśnij przycisk "Zapisz pozę".
+onboarding-stay_aligned-relaxed_poses-flat-title = Zrelaksowana pozycja siedząca na podłodze
+onboarding-stay_aligned-relaxed_poses-flat-step-0 = 1. Usiądź na podłodze z nogami wysuniętymi do przodu. Zrelaksuj się!
+onboarding-stay_aligned-relaxed_poses-flat-step-1-v2 = 2. Naciśnij przycisk "Zapisz pozę".
+onboarding-stay_aligned-relaxed_poses-skip_step = Pomiń
+onboarding-stay_aligned-done-title = Wyrównywanie Włączone!
+onboarding-stay_aligned-done-description = Konfiguracja Wyrównywania jest zakończona!
+onboarding-stay_aligned-done-description-2 = Konfiguracja została zakończona! Możesz ponownie uruchomić proces, jeśli chcesz ponownie skalibrować pozy.
+onboarding-stay_aligned-previous_step = Poprzednie
+onboarding-stay_aligned-next_step = Następne
+onboarding-stay_aligned-restart = Restart
+onboarding-stay_aligned-done = Gotowy
 
 ## Home
 
@@ -1017,6 +1386,158 @@ status_system-StatusSteamVRDisconnected =
     }
 status_system-StatusTrackerError = Tracker { $trackerName } ma błąd.
 status_system-StatusUnassignedHMD = Headset powinien być przypisany do śledzenia głowy.
+status_system-StatusPublicNetwork =
+    { $count ->
+        [one] Twoja karta sieciowa jest ustawiona jako publiczna: { $adapters }. Nie jest to zalecane, aby SlimeVR działał poprawnie. <PublicFixLink>Zobacz, jak to naprawić tutaj.</PublicFixLink>
+        [few] Niektóre karty sieciowe są ustawione jako publiczne: { $adapters }. Nie jest to zalecane, aby SlimeVR działał poprawnie. <PublicFixLink>Zobacz, jak to naprawić tutaj.</PublicFixLink>
+       *[many] Dużo twoich karty sieciowych jest ustawionych jako publiczne: { $adapters }. Nie jest to zalecane, aby SlimeVR działał poprawnie. <PublicFixLink>Zobacz, jak to naprawić tutaj.</PublicFixLink>
+    }
+
+## Firmware tool globals
+
+firmware_tool-next_step = Następny krok
+firmware_tool-previous_step = Poprzedni krok
+firmware_tool-ok = Wygląda dobrze
+firmware_tool-retry = Powtórz
+firmware_tool-loading = Ładowanie...
+
+## Firmware tool Steps
+
+firmware_tool = Narzędzie do oprogramowania sprzętowego DIY
+firmware_tool-description = Umożliwia konfigurowanie i flashowanie trackerów DIY
+firmware_tool-not_available = Ups, narzędzie do oprogramowania sprzętowego nie jest obecnie dostępne. Wróć później!
+firmware_tool-not_compatible = Narzędzie oprogramowania układowego nie jest kompatybilne z tą wersją serwera. Proszę zaktualizować swój serwer!
+firmware_tool-board_step = Wybierz swoją tablicę
+firmware_tool-board_step-description = Wybierz jedną z plansz wymienionych poniżej.
+firmware_tool-board_pins_step = Sprawdź piny
+firmware_tool-board_pins_step-description =
+    Sprawdź, czy wybrane piny są prawidłowe.¶
+    Jeśli postępowałeś zgodnie z dokumentacją SlimeVR, wartości domyślne powinny być prawidłowe
+firmware_tool-board_pins_step-enable_led = Włącz diodę LED
+firmware_tool-board_pins_step-led_pin =
+    .label = Pin LED
+    .placeholder = Wprowadź adres pin diody LED
+firmware_tool-board_pins_step-battery_type = Wybierz typ baterii
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Bateria zewnętrzna
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Bateria wewnętrzna
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = Wewnętrzny MCP3021
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = Czujnik akumulatora Pin
+    .placeholder = Wprowadź adres pin czujnika akumulatora
+firmware_tool-board_pins_step-battery_resistor =
+    .label = Rezystor akumulatora (Ohms)
+    .placeholder = Wprowadź wartość rezystora akumulatora
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = Osłona akumulatora R1 (Ohms)
+    .placeholder = Wprowadź wartość Battery Shield R1
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = Osłona akumulatora R2 (Ohms)
+    .placeholder = Wprowadź wartość Battery Shield R2
+firmware_tool-add_imus_step = Zadeklaruj swoje IMU
+firmware_tool-add_imus_step-description =
+    Dodaj IMU, które posiada Twój tracker¶
+    Jeśli postępowałeś zgodnie z dokumentacją SlimeVR, wartości domyślne powinny być prawidłowe
+firmware_tool-add_imus_step-imu_type-label = Typ IMU
+firmware_tool-add_imus_step-imu_type-placeholder = Wybierz typ IMU
+firmware_tool-add_imus_step-imu_rotation =
+    .label = Obrót IMU (stopnie)
+    .placeholder = Kąt obrotu IMU
+firmware_tool-add_imus_step-scl_pin =
+    .label = SCL Pin
+    .placeholder = Adres PIN SCL
+firmware_tool-add_imus_step-sda_pin =
+    .label = SDA Pin
+    .placeholder = Adres PIN SDA
+firmware_tool-add_imus_step-int_pin =
+    .label = INT Pin
+    .placeholder = Adres PIN INT
+firmware_tool-add_imus_step-optional_tracker =
+    .label = Opcjonalny moduł śledzący
+firmware_tool-add_imus_step-show_less = Pokaż mniej
+firmware_tool-add_imus_step-show_more = Pokaż więcej
+firmware_tool-add_imus_step-add_more = Dodaj więcej IMU
+firmware_tool-select_firmware_step = Wybierz wersję oprogramowania sprzętowego
+firmware_tool-select_firmware_step-description = Wybierz wersję oprogramowania, której chcesz używać
+firmware_tool-select_firmware_step-show-third-party =
+    .label = Pokaż oprogramowanie sprzętowe innych firm
+firmware_tool-flash_method_step = Metoda flashowania
+firmware_tool-flash_method_step-description = Wybierz metodę flashowania, której chcesz użyć
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Użyj metody bezprzewodowej. Twój tracker użyje Wi-Fi do aktualizacji oprogramowania sprzętowego. Działa tylko na już skonfigurowanych trackerach.
+firmware_tool-flash_method_step-serial =
+    .label = Serial
+    .description = Aby zaktualizować tracker, użyj kabla USB.
+firmware_tool-flashbtn_step = Naciśnij przycisk zasilania
+firmware_tool-flashbtn_step-description = Zanim przejdziesz do następnego kroku, musisz zrobić kilka rzeczy
+firmware_tool-flashbtn_step-board_SLIMEVR =
+    Naciśnij przycisk flash na płytce drukowanej przed włożeniem, aby włączyć tracker.¶
+    Jeśli tracker był już włączony, po prostu go wyłącz i włącz ponownie, naciskając przycisk lub zwierając podkładki flash.¶
+    Oto kilka zdjęć, jak to zrobić, zgodnie z różnymi wersjami trackera SlimeVR
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Włącz tracker zwierając drugi prostokątny pad FLASH od krawędzi na górnej stronie płytki, a metalową osłonę mikrokontrolera
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Włącz tracker zwierając okrągłą podkładkę FLASH na górze płytki i metalową osłonę mikrokontrolera
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Włącz tracker, naciskając przycisk FLASH na górze płytki
+firmware_tool-flashbtn_step-board_OTHER =
+    Przed flashowaniem prawdopodobnie będziesz musiał przełączyć moduł śledzący w tryb bootloadera.¶
+    W większości przypadków oznacza to naciśnięcie przycisku rozruchu na płycie przed rozpoczęciem procesu flashowania.¶
+    Jeśli na początku flashowania upłynie limit czasu procesu flashowania, prawdopodobnie oznacza to, że moduł śledzący nie był w trybie bootloadera¶
+    Aby dowiedzieć się, jak włączyć tryb ładowarki łodzi, zapoznaj się z instrukcjami flashowania swojej tablicy
+firmware_tool-flash_method_ota-devices = Wykryte urządzenia OTA:
+firmware_tool-flash_method_ota-no_devices = Nie ma tablic, które można zaktualizować za pomocą OTA, upewnij się, że wybrałeś właściwy typ płyty
+firmware_tool-flash_method_serial-wifi = Dane uwierzytelniające Wi-Fi:
+firmware_tool-flash_method_serial-devices-label = Wykryte urządzenia szeregowe:
+firmware_tool-flash_method_serial-devices-placeholder = Wybierz urządzenie szeregowe
+firmware_tool-flash_method_serial-no_devices = Nie wykryto kompatybilnych urządzeń szeregowych. Upewnij się, że tracker jest podłączony
+firmware_tool-build_step = Building
+firmware_tool-build_step-description = Trwa tworzenie oprogramowania sprzętowego. Proszę czekać
+firmware_tool-flashing_step = Flashing
+firmware_tool-flashing_step-description = Twoje trackery migają. Postępuj zgodnie z instrukcjami wyświetlanymi na ekranie
+firmware_tool-flashing_step-warning-v2 = Nie odłączaj ani nie wyłączaj trackera podczas procesu przesyłania, chyba że zostaniesz o to poproszony, może to spowodować, że twoje urządzenie stanie się bezużyteczne.
+firmware_tool-flashing_step-flash_more = Flashuj więcej trackerów
+firmware_tool-flashing_step-exit = Wyjście
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = Tworzenie folderu kompilacji
+firmware_tool-build-DOWNLOADING_FIRMWARE = Pobieranie oprogramowania sprzętowego
+firmware_tool-build-EXTRACTING_FIRMWARE = Wyodrębnianie oprogramowania sprzętowego
+firmware_tool-build-SETTING_UP_DEFINES = Konfigurowanie definicji
+firmware_tool-build-BUILDING = Budowa oprogramowania sprzętowego
+firmware_tool-build-SAVING = Zapisywanie kompilacji
+firmware_tool-build-DONE = Budowa ukończona
+firmware_tool-build-ERROR = Nie można zbudować oprogramowania sprzętowego
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = Pobieranie oprogramowania sprzętowego
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = Wyłącz i ponownie włącz swój tracker
+firmware_update-status-AUTHENTICATING = Uwierzytelnianie za pomocą MCU
+firmware_update-status-UPLOADING = Przesyłanie oprogramowania sprzętowego
+firmware_update-status-SYNCING_WITH_MCU = Synchronizacja z MCU
+firmware_update-status-REBOOTING = Ponowne uruchomienie trackera
+firmware_update-status-PROVISIONING = Ustawianie danych uwierzytelniających Wi-Fi
+firmware_update-status-DONE = Aktualizacja zakończona!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = Nie udało się znaleźć urządzenia
+firmware_update-status-ERROR_TIMEOUT = Upłynął limit czasu procesu aktualizacji
+firmware_update-status-ERROR_DOWNLOAD_FAILED = Nie można pobrać oprogramowania sprzętowego
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = Nie można uwierzytelnić za pomocą MCU
+firmware_update-status-ERROR_UPLOAD_FAILED = Nie można załadować oprogramowania sprzętowego
+firmware_update-status-ERROR_PROVISIONING_FAILED = Nie można ustawić danych uwierzytelniających Wi-Fi
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = Metoda aktualizacji nie jest obsługiwana
+firmware_update-status-ERROR_UNKNOWN = Nieznany błąd
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = Aktualizacja oprogramowania
+firmware_update-devices = Dostępne urządzenia
+firmware_update-devices-description = Wybierz trackery, które chcesz zaktualizować do najnowszej wersji oprogramowania SlimeVR
+firmware_update-no_devices = Upewnij się, że trackery, które chcesz zaktualizować, są włączone i połączone z Wi-Fi!
+firmware_update-changelog-title = Aktualizuję do wersji { $version }
+firmware_update-looking_for_devices = Szukasz urządzeń do aktualizacji...
+firmware_update-retry = Spróbować ponownie
+firmware_update-update = Zaktualizuj wybrane moduły śledzące
+firmware_update-exit = Wyjście
 
 ## Tray Menu
 
@@ -1045,3 +1566,53 @@ unknown_device-modal-description =
     Czy chcesz podłączyć go do SlimeVR?
 unknown_device-modal-confirm = Jasne!
 unknown_device-modal-forget = Ignoruj
+# VRChat config warnings
+vrc_config-page-title = Ostrzeżenia dotyczące konfiguracji VRChat
+vrc_config-page-desc = Ta strona pokazuje stan ustawień VRChat i pokazuje, jakie ustawienia są niekompatybilne ze SlimeVR. Zdecydowanie zaleca się naprawienie wszelkich pojawiających się tutaj ostrzeżeń, aby zapewnić najlepsze wrażenia użytkownika z SlimeVR.
+vrc_config-page-help = Nie możesz znaleźć ustawień?
+vrc_config-page-help-desc = Zapoznaj się <a>z naszą dokumentacją na ten temat!</a>
+vrc_config-page-big_menu = Śledzenie i IK (duże menu)
+vrc_config-page-big_menu-desc = Ustawienia związane z kinematyką odwrotną w dużym menu ustawień
+vrc_config-page-wrist_menu = Śledzenie i IK (menu na nadgarstku)
+vrc_config-page-wrist_menu-desc = Ustawienia związane z kinematyką odwrotną w małym menu ustawień (menu na nadgarstku)
+vrc_config-on = Na
+vrc_config-off = Od
+vrc_config-invalid = Źle skonfigurowałeś ustawienia VRChat!
+vrc_config-show_more = Pokaż więcej
+vrc_config-setting_name = Nazwa ustawienia VRChat
+vrc_config-recommended_value = Zalecana wartość
+vrc_config-current_value = Bieżąca wartość
+vrc_config-mute = Wycisz Ostrzeżenie
+vrc_config-mute-btn = Wycisz
+vrc_config-unmute-btn = Odcisz
+vrc_config-legacy_mode = Korzystanie ze starszego rozwiązywania kinematyki odwrotnej
+vrc_config-disable_shoulder_tracking = Wyłącz śledzenie ramienia
+vrc_config-shoulder_width_compensation = Kompensacja szerokości barku
+vrc_config-spine_mode = Tryb FBT Spine
+vrc_config-tracker_model = Model śledzenia FBT
+vrc_config-avatar_measurement_type = Pomiar awatara
+vrc_config-calibration_range = Zakres kalibracji
+vrc_config-calibration_visuals = Wyświetlanie wizualizacji kalibracji
+vrc_config-user_height = Rzeczywista wysokość użytkownika
+vrc_config-spine_mode-UNKNOWN = Nieznany
+vrc_config-spine_mode-LOCK_BOTH = Zablokuj oba
+vrc_config-spine_mode-LOCK_HEAD = Zablokuj głowicę
+vrc_config-spine_mode-LOCK_HIP = Zablokuj biodro
+vrc_config-tracker_model-UNKNOWN = Nieznany
+vrc_config-tracker_model-AXIS = Oś
+vrc_config-tracker_model-BOX = Pudełko
+vrc_config-tracker_model-SPHERE = Sfera
+vrc_config-tracker_model-SYSTEM = System
+vrc_config-avatar_measurement_type-UNKNOWN = Nieznany
+vrc_config-avatar_measurement_type-HEIGHT = Wysokość
+vrc_config-avatar_measurement_type-ARM_SPAN = Rozpiętość ramion
+
+## Error collection consent modal
+
+error_collection_modal-title = Czy możemy zbierać błędy?
+error_collection_modal-description_v2 =
+    { ustawienia-interfejsu-zachowanie-error_tracking-description_v2 }
+    
+    To ustawienie można zmienić później w sekcji Zachowanie na stronie ustawień.
+error_collection_modal-confirm = Zgadzam się
+error_collection_modal-cancel = Nie chcę

gui/public/i18n/pt-BR/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Conectando ao servidor
 websocket-connection_lost = Conexão perdida com o servidor. Reconectando...
+websocket-connection_lost-desc = Parece que o servidor do SlimeVR crashou. Verifique as logs e reinicie o programa
+websocket-timedout = Não foi possível conectar-se ao servidor
+websocket-timedout-desc = Parece que o SlimeVR server crashou ou parou de responder. Verifique as logs e reinicie o programa
+websocket-error-close = Sair do SlimeVR
+websocket-error-logs = Abrir a pasta de logs
 
 ## Update notification
 
@@ -36,7 +41,7 @@ body_part-RIGHT_UPPER_ARM = Braço superior direito
 body_part-RIGHT_LOWER_ARM = Antebraço direito
 body_part-RIGHT_HAND = Mão Direita
 body_part-RIGHT_UPPER_LEG = Coxa direita
-body_part-RIGHT_LOWER_LEG = Canela direita
+body_part-RIGHT_LOWER_LEG = Tornozelo direito
 body_part-RIGHT_FOOT = Pé direito
 body_part-UPPER_CHEST = Peito Superior
 body_part-CHEST = Peito
@@ -47,8 +52,36 @@ body_part-LEFT_UPPER_ARM = Braço superior esquerdo
 body_part-LEFT_LOWER_ARM = Antebraço esquerdo
 body_part-LEFT_HAND = Mão esquerda
 body_part-LEFT_UPPER_LEG = Coxa esquerda
-body_part-LEFT_LOWER_LEG = Canela esquerda
+body_part-LEFT_LOWER_LEG = Tornozelo esquerdo
 body_part-LEFT_FOOT = Pé esquerdo
+body_part-LEFT_THUMB_METACARPAL = Metacarpo do polegar esquerdo
+body_part-LEFT_THUMB_PROXIMAL = Proximal do polegar esquerdo
+body_part-LEFT_THUMB_DISTAL = Distal do polegar esquerdo
+body_part-LEFT_INDEX_PROXIMAL = Indicador esquerdo proximal
+body_part-LEFT_INDEX_INTERMEDIATE = Indicador esquerdo intermediário
+body_part-LEFT_INDEX_DISTAL = Indicador esquerdo distal
+
+## BoardType
+
+board_type-UNKNOWN = Desconhecido
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = Placa Customizada
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Joycons
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU Glove
 
 ## Proportions
 
@@ -81,11 +114,14 @@ skeleton_bone-ELBOW_OFFSET = Compensação do Cotovelo
 ## Tracker reset buttons
 
 reset-reset_all = Redefinir todas as proporções
-reset-reset_all_warning =
-    <b>Aviso:<b>  Isso irá resetar suas proporções para serem baseadas apenas em sua altura.
-    Você tem certeza que deseja fazer isso?
+reset-reset_all_warning-v2 =
+    <b>Aviso:</b> Suas proporções serão redefinidas para o padrão baseado na sua altura configurada.
+    Tem certeza que deseja fazer isso?
 reset-reset_all_warning-reset = Resetar proporções
 reset-reset_all_warning-cancel = Cancelar
+reset-reset_all_warning_default-v2 =
+    <b>Aviso:</b> Sua altura não foi configurada, suas proporções serão redefinidas para os padrões com a altura padrão.
+    Tem certeza que quer fazer isso?
 reset-full = Reset Completo
 reset-mounting = Reset de Posição
 reset-yaw = Reset de guinada (yaw)
@@ -204,6 +240,7 @@ tracker-infos-url = URL do Tracker
 tracker-infos-version = Versão do firmware
 tracker-infos-hardware_rev = Revisão do hardware
 tracker-infos-hardware_identifier = ID do Hardware
+tracker-infos-data_support = Assistência de dados
 tracker-infos-imu = Sensor IMU
 tracker-infos-board_type = Placa principal
 tracker-infos-network_version = Versão do protocolo
@@ -244,6 +281,12 @@ tracker-settings-name_section-label = Nome do tracker
 tracker-settings-forget = Esquecer o tracker
 tracker-settings-forget-description = Remove o tracker do servidor SlimeVR e impede que ele se conecte a ele até que o servidor seja reiniciado. A configuração do tracker não será perdida.
 tracker-settings-forget-label = Esquecer o tracker
+tracker-settings-update-unavailable = Não pode ser atualizado (DIY)
+tracker-settings-update-low-battery = Não é possível atualizar. Bateria abaixo de 50%
+tracker-settings-update-up_to_date = Atualizado
+tracker-settings-update-available = { $versionName } está disponível
+tracker-settings-update = Atualizar agora
+tracker-settings-update-title = Versão do firmware
 
 ## Tracker part card info
 
@@ -319,6 +362,9 @@ settings-sidebar-utils = Utilidades
 settings-sidebar-serial = Console Serial
 settings-sidebar-appearance = Aparência
 settings-sidebar-notifications = Notificações
+settings-sidebar-behavior = Comportamento
+settings-sidebar-firmware-tool = Ferramenta de firmware DIY
+settings-sidebar-vrc_warnings = Alerta nas Configurações do VRChat
 settings-sidebar-advanced = Avançado
 
 ## SteamVR settings
@@ -400,6 +446,8 @@ settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
     Usa o magnetômetro em todos os trackers com firmware compatível, reduzindo o drift em ambientes magneticamente estáveis.
     Essa opção pode ser desativada indivualmente nas configurações de cada tracker. <b>Não desligue nenhum dos trackers enquanto altera esta opção!</b>
 settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Usar o magnetômetro nos trackers
+settings-stay_aligned-general-label = Geral
+settings-stay_aligned-relaxed_poses-close = Fechar
 
 ## FK/Tracking settings
 
@@ -423,6 +471,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = Pé plantado gir
 settings-general-fk_settings-leg_fk = Tracking de pernas
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Ativar o Reset de Posição dos pés ao ficar nas pontas dos pés.
 settings-general-fk_settings-leg_fk-reset_mounting_feet = Reset de Posição dos pés
+settings-general-fk_settings-enforce_joint_constraints = Limites do esqueleto
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Impor limites
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Evita que as articulações rotacionem além de seu limite
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Corrigir com limites
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Corrija as rotações das articulações quando elas ultrapassarem seus limites
 settings-general-fk_settings-arm_fk = Opções do Braço
 settings-general-fk_settings-arm_fk-description = Muda o jeito que os braços são rastreados.
 settings-general-fk_settings-arm_fk-force_arms = Forçar braços do HMD
@@ -454,9 +507,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Calcu
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Calcular a média da guinada e rolamento do joelho com os tornozelos
 settings-general-fk_settings-self_localization-title = Modo mocap
 settings-general-fk_settings-self_localization-description = O modo mocap permite que o esqueleto rastreie aproximadamente sua própria posição sem um headset ou outros trackers. Observe que isso requer trackers de pés e cabeça para funcionar e ainda é experimental.
-settings-general-fk_settings-vive_emulation-title = Emulação de Vive
-settings-general-fk_settings-vive_emulation-description = Emule o problema de tracker da cintura que o Vive tracker tem. Isso é uma piada e faz o tracking ficar pior.
-settings-general-fk_settings-vive_emulation-label = Ativar emulação de Vive
 
 ## Gesture control settings (tracker tapping)
 
@@ -529,6 +579,13 @@ settings-general-interface-feedback_sound-volume = Volume do som de feedback
 settings-general-interface-connected_trackers_warning = Aviso de trackers conectados
 settings-general-interface-connected_trackers_warning-description = Essa opção exibirá um pop-up toda vez que você tentar fechar o SlimeVR enquanto tiver um ou mais trackers conectados. Ela o lembrará de desligar os trackers quando você terminar para preservar a vida útil da bateria.
 settings-general-interface-connected_trackers_warning-label = Aviso de trackers conectados ao fechar
+
+## Behavior settings
+
+settings-interface-behavior = Comportamento
+settings-general-interface-dev_mode = Modo de desenvolvedor
+settings-general-interface-dev_mode-description = Este modo pode ser útil se precisar de dados específicos ou para interagir com trackers conectados a um nível mais avançado
+settings-general-interface-dev_mode-label = Modo de desenvolvedor
 settings-general-interface-use_tray = Minimizar para bandeja do sistema
 settings-general-interface-use_tray-description = Permite que você feche a janela sem fechar o servidor do SlimeVR, para que possa continuar usando-o sem que a interface gráfica o incomode.
 settings-general-interface-use_tray-label = Minimizar para a bandeja do sistema
@@ -541,6 +598,14 @@ settings-general-interface-discord_presence-message =
         [one] Usando 1 tracker
        *[other] Usando { $amount } trackers
     }
+settings-interface-behavior-error_tracking = Coleta de erros via Sentry.io
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>Você <h1>concorda com a coleta de dados de erro anônimos?</h1><b></h1> <b>Não coletamos informações pessoais</b></b>, como seu endereço IP ou credenciais de rede sem fio. A SlimeVR valoriza sua privacidade!
+    
+    Para oferecer a melhor experiência ao usuário, coletamos relatórios de erros anônimos, métricas de desempenho e informações do sistema operacional. Isso nos ajuda a detectar bugs e problemas com o SlimeVR. Essas métricas são coletadas pelo Sentry.io.
+    
+    Traduzido com a versão gratuita do tradutor - DeepL.com
+settings-interface-behavior-error_tracking-label = Enviar erros para os desenvolvedores
 
 ## Serial settings
 
@@ -604,6 +669,12 @@ settings-osc-vrchat-description-v1 =
 settings-osc-vrchat-enable = Ativar
 settings-osc-vrchat-enable-description = Ligar ou desligar o envio e recebimento de dados
 settings-osc-vrchat-enable-label = Ativar
+settings-osc-vrchat-oscqueryEnabled = Habilitar OSCQuery
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery detecta automaticamente instâncias em execução do VRChat e envia dados para ele.
+    Ele também pode anunciar-se para que ele receba dados de HMD e de controles.
+    Para permitir o recebimento de dados de HMD e controles do VRChat, vá às configurações do seu menu principal, na seção "Tracking & IK", e habilite "Enviar Dados OSC de Rastreio de RV da Cabeça e do Pulso".
+settings-osc-vrchat-oscqueryEnabled-label = Ativar OSCQuery
 settings-osc-vrchat-network = Portas de rede
 settings-osc-vrchat-network-description-v1 = Define as portas para receber e enviar dados. Pode ser deixado como está para o VRChat.
 settings-osc-vrchat-network-port_in =
@@ -646,12 +717,7 @@ settings-osc-vmc-network-address-description = Escolha o endereço para envio de
 settings-osc-vmc-network-address-placeholder = Endereço IPV4
 settings-osc-vmc-vrm = Modelo VRM
 settings-osc-vmc-vrm-description = Carregue um modelo de VRM para permitir ancoragem de cabeça e possibilitar uma maior compatibilidade com outras aplicações.
-settings-osc-vmc-vrm-model_unloaded = Nenhum modelo carregado
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Modelo carregado: { $name }
-       *[other] Modelo sem título carregado
-    }
+settings-osc-vmc-vrm-untitled_model = Modelo sem título
 settings-osc-vmc-vrm-file_select = Arraste e solte um modelo para usar, ou <u>navegue</u>
 settings-osc-vmc-anchor_hip = Ancorar no quadril
 settings-osc-vmc-anchor_hip-description = Ancorar o rastreamento no quadril, útil para VTubing sentado. Se desativar, carregue um modelo VRM.
@@ -686,9 +752,12 @@ settings-utils-advanced-reset_warning =
     }
 settings-utils-advanced-reset_warning-reset = Resetar configurações
 settings-utils-advanced-reset_warning-cancel = Cancelar
-settings-utils-advanced-open_data = Pasta de arquivos
-settings-utils-advanced-open_data-description = Abre a pasta de arquivos do SlimeVR no explorador de arquivos, a qual contém os arquivos de configuração e de registro.
+settings-utils-advanced-open_data-v1 = Pasta de configuração
+settings-utils-advanced-open_data-description-v1 = Abre a pasta de configuração do SlimeVR no explorador de arquivos, contendo as configurações
 settings-utils-advanced-open_data-label = Abrir pasta
+settings-utils-advanced-open_logs = Pasta de logs
+settings-utils-advanced-open_logs-description = Abre a pasta de logs do SlimeVR no explorador de arquivos, contendo os logs do aplicativo
+settings-utils-advanced-open_logs-label = Abrir pasta
 
 ## Setup/onboarding menu
 
@@ -715,6 +784,7 @@ onboarding-wifi_creds-submit = Enviar!
 onboarding-wifi_creds-ssid =
     .label = SSID
     .placeholder = Enter SSID
+onboarding-wifi_creds-ssid-required = Nome do Wi-Fi é obrgiatório
 onboarding-wifi_creds-password =
     .label = Password
     .placeholder = Enter password
@@ -772,6 +842,7 @@ onboarding-connect_tracker-issue-serial = Estou tendo problemas para conectar!
 onboarding-connect_tracker-usb = Tracker USB
 onboarding-connect_tracker-connection_status-none = Procurando por trackers
 onboarding-connect_tracker-connection_status-serial_init = Conectando ao dispositivo serial
+onboarding-connect_tracker-connection_status-obtaining_mac_address = Obtendo o endereço MAC do tracker
 onboarding-connect_tracker-connection_status-provisioning = Enviando credenciais de Wi-Fi
 onboarding-connect_tracker-connection_status-connecting = Enviando credenciais de Wi-Fi
 onboarding-connect_tracker-connection_status-looking_for_server = Procurando servidor
@@ -881,18 +952,18 @@ onboarding-assign_trackers-warning-RIGHT_FOOT =
 # $unassigned (Number) - Bits are based on BodyAssignment.ASSIGNMENT_RULES order
 onboarding-assign_trackers-warning-LEFT_LOWER_LEG =
     { $unassigned ->
-        [0] Canela esquerda está atribuída, porém a coxa esquerda e peito, quadril ou cintura também precisam ser atribuídos!
-        [1] Canela esquerda está atribuída, porém peito, quadril ou cintura também precisam ser atribuídos!
-        [2] Canela esquerda está atribuída, porém a coxa direita também precisa ser atribuída!
-       *[unknown] Canela esquerda está atribuída, porém a parte do corpo desconhecida não atribuída também precisa ser atribuída!
+        [2] Tornozelo esquerdo está atribuído, porém a coxa direita também precisa ser atribuída!
+        [1] Tornozelo esquerdo está atribuído, porém peito, quadril ou cintura também precisam ser atribuídos!
+        [0] Tornozelo esquerdo está atribuído, porém a coxa esquerda e peito, quadril ou cintura também precisam ser atribuídos!
+       *[unknown] Tornozelo esquerdo está atribuído, porém a parte do corpo desconhecida não atribuída também precisa ser atribuída!
     }
 # $unassigned (Number) - Bits are based on BodyAssignment.ASSIGNMENT_RULES order
 onboarding-assign_trackers-warning-RIGHT_LOWER_LEG =
     { $unassigned ->
-        [0] Canela direita está atribuída, porém a coxa direita e peito, quadril ou cintura também precisam ser atribuídos!
-        [1] Canela direita está atribuída, porém peito, quadril ou cintura também precisam ser atribuídos!
-        [2] Canela direita está atribuída, porém a coxa direita também precisa ser atribuída!
-       *[unknown] Canela direita está atribuída, porém a parte do corpo desconhecida não atribuída também precisa ser atribuída!
+        [2] Tornozelo direito está atribuído, porém a coxa direita também precisa ser atribuída!
+        [1] Tornozelo direito está atribuído, porém peito, quadril ou cintura também precisam ser atribuídos!
+        [0] Tornozelo direito está atribuído, porém a coxa direita e peito, quadril ou cintura também precisam ser atribuídos!
+       *[unknown] Tornozelo direito está atribuído, porém a parte do corpo desconhecida não atribuída também precisa ser atribuída!
     }
 # $unassigned (Number) - Bits are based on BodyAssignment.ASSIGNMENT_RULES order
 onboarding-assign_trackers-warning-LEFT_UPPER_LEG =
@@ -963,44 +1034,19 @@ onboarding-automatic_mounting-mounting_reset-title = Reset de Posição
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Agache-se em uma pose de "esqui" com as pernas dobradas, a parte superior do corpo inclinada para a frente e os braços dobrados.
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Pressione o botão "Resetar Posição" e aguarde 3 segundos antes que as rotações de posição dos trackers sejam redefinidas.
 onboarding-automatic_mounting-preparation-title = Preparação
-onboarding-automatic_mounting-preparation-step-0 = 1. Fique de pé com os braços ao lado do corpo.
-onboarding-automatic_mounting-preparation-step-1 = 2. Pressione o botão "Reset" e aguarde 3 segundos antes que os trackers sejam reiniciados.
 onboarding-automatic_mounting-put_trackers_on-title = Coloque seus trackers
 onboarding-automatic_mounting-put_trackers_on-description = Para calibrar as rotações de posicionamento, usaremos os trackers que você atribuiu. Coloque todos os seus trackers, você pode ver qual é qual na figura na direita.
 onboarding-automatic_mounting-put_trackers_on-next = Coloquei todos os meus trackers
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = Qual método de calibração de proporções você deseja usar?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    As proporções do corpo são usadas para saber as dimensões do seu corpo. Elas são necessárias para calcular as posições dos trackers.
-    Quando as proporções do seu corpo não corresponderem às que estão salvas, a precisão do rastreamento será pior e você observará problemas como efeito de patinação ou deslizamento, ou que seu corpo não corresponde bem ao seu avatar.
-    <b>Você precisará medir seu corpo apenas uma vez!</b> Se as medições estiverem corretas e o seu corpo não tiver passado por mudanças significativas, não há necessidade de repeti-las.
-onboarding-choose_proportions-auto_proportions = Proporções automáticas
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = Recomendado
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Isso irá estimar suas proporções gravando uma amostra de seus movimentos e passando-a por um algoritmo.
-    
-    <b>Isso requer ter seu headset (HMD) conectado ao SlimeVR e na sua cabeça!</b>
-onboarding-choose_proportions-manual_proportions = Proporções manuais
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = Para pequenos ajustes
-onboarding-choose_proportions-manual_proportions-description = Isso permitirá que você ajuste suas proporções manualmente, modificando-as diretamente
-onboarding-choose_proportions-export = Exportar proporções
-onboarding-choose_proportions-import = Importar proporções
-onboarding-choose_proportions-import-success = Importado
-onboarding-choose_proportions-import-failed = Falhou
-onboarding-choose_proportions-file_type = Arquivo de proporções do corpo
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Voltar para o tutorial de reset
 onboarding-manual_proportions-title = Proporções de corpo manuais
-onboarding-manual_proportions-precision = Ajuste de precisão
-onboarding-manual_proportions-auto = Calibragem Automática
-onboarding-manual_proportions-ratio = Ajustar por grupos de proporções
+onboarding-manual_proportions-fine_tuning_button = Melhorar automaticamente as proporções
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Por favor, conecte seu headset VR para utilizar a melhoria automatica
+onboarding-manual_proportions-export = Exportar proporções
+onboarding-manual_proportions-import = Importar proporções
+onboarding-manual_proportions-file_type = Arquivo de proporções do corpo
 
 ## Tracker automatic proportions setup
 
@@ -1021,21 +1067,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Seu headset está enviando dados de posição para o servidor SlimeVR (isso geralmente significa ter o SteamVR em execução e conectado ao SlimeVR usando o driver SteamVR do SlimeVR).
     Seu rastreamento está funcionando e representa com precisão seus movimentos (por exemplo, você realizou uma reinicialização completa e eles se movem na direção certa ao chutar, se inclinar, sentar, etc.).
 onboarding-automatic_proportions-requirements-next = Eu li os requisitos.
-onboarding-automatic_proportions-check_height-title = Cheque sua altura
-onboarding-automatic_proportions-check_height-description = Usamos sua altura como base para nossas medições, usando a altura do headset (HMD) como uma aproximação de sua altura real, mas é melhor verificar se estão corretas por conta própria!
+onboarding-automatic_proportions-check_height-title-v3 = Meça a altura do seu headset
+onboarding-automatic_proportions-check_height-description-v2 = A altura do seu headset (HMD) deve ser um pouco menor que sua altura total, já que o headset mede a altura do olho. Essa medida será usada como base para as proporções do seu corpo
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Por favor, pressione o botão enquanto estiver em pé <u>reto</u> para calcular sua altura. Você tem 3 segundos depois de pressionar o botão!
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = Comece a medir enquanto está <u>de pé</u> para medir sua altura. Tome cuidado para não levantar sua mão mais alto que seu headset, pois pode prejudicar as medidas!
 onboarding-automatic_proportions-check_height-guardian_tip =
     Se você estiver usando um óculos VR standalone, certifique-se de que seu guardião /
     limite esteja ligado para que sua altura seja a correta!
-onboarding-automatic_proportions-check_height-fetch_height = Estou em pé!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Desconhecido
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = A altura do seu HMD é
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = então, sua altura real é
+onboarding-automatic_proportions-check_height-hmd_height2 = A altura do seu headset é:
+onboarding-automatic_proportions-check_height-measure-start = Comece a medir
+onboarding-automatic_proportions-check_height-measure-stop = Parar medição
+onboarding-automatic_proportions-check_height-measure-reset = Refazer medição
 onboarding-automatic_proportions-check_height-next_step = Estão bem
+onboarding-automatic_proportions-check_floor_height-title = Medir a altura do seu chão (opcional)
+onboarding-automatic_proportions-check_floor_height-description = Em alguns casos, a altura do chão pode não estar corretamente configurada pelo seu headset, fazendo com que a altura do seu headset seja medida mais alta do que deveria. Você pode medir a "altura" do seu chão para corrigir a altura do seu headset
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Inicie a medição e coloque o controle no chão para medir a altura. Se você tem certeza que a altura do chão está correta, você pode pular essa etapa
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = A altura do seu chão é:
+onboarding-automatic_proportions-check_floor_height-full_height = A sua altura total estimada é:
+onboarding-automatic_proportions-check_floor_height-measure-start = Comece a medir
+onboarding-automatic_proportions-check_floor_height-measure-stop = Parar de medir
+onboarding-automatic_proportions-check_floor_height-measure-reset = Refazer medição
+onboarding-automatic_proportions-check_floor_height-skip_step = Pular etapa e salvar
+onboarding-automatic_proportions-check_floor_height-next_step = Usar a altura do chão e salvar
 onboarding-automatic_proportions-start_recording-title = Esteja preparado para se mexer
 onboarding-automatic_proportions-start_recording-description = Começaremos a gravar algumas poses e movimentos específicos. Estes serão solicitados na próxima tela. Esteja preparado para começar quando o botão for pressionado!
 onboarding-automatic_proportions-start_recording-next = Começar Gravação
@@ -1070,6 +1128,32 @@ onboarding-automatic_proportions-error_modal-v2 =
     Isso provavelmente é um problema da calibragem de posição. Verifique se o rastreamento está funcionando corretamente antes de tentar novamente.
     Por favor, <docs>verifique a  documentação</docs> ou entre em nosso <discord> Discord</discord> para obter ajuda ^_^
 onboarding-automatic_proportions-error_modal-confirm = Entendido!
+onboarding-automatic_proportions-smol_warning =
+    A sua altura configurada de: { $height } é menor que a altura mínima aceita de: { $minHeight }.
+    <b>Por favor refaça as medidas e tenha certeza que estão corretas.</b>
+onboarding-automatic_proportions-smol_warning-cancel = Voltar
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = Proporções escalonadas
+onboarding-scaled_proportions-description = Para os trackers SlimeVR funcionarem, precisamos saber as medidas de seus ossos. Isso usará uma proporção média e a dimensionará com base em sua altura.
+onboarding-scaled_proportions-manual_height-title = Configure sua altura
+onboarding-scaled_proportions-manual_height-description-v2 = Essa altura será usada como referência para as proporções de seu corpo.
+onboarding-scaled_proportions-manual_height-missing_steamvr = No momento, o SteamVR não está conectado ao SlimeVR, portanto as medições não podem ser baseadas no seu headset. <b>Prossiga por sua conta e risco ou consulte a documentação!</b>
+onboarding-scaled_proportions-manual_height-height-v2 = A sua altura total é
+onboarding-scaled_proportions-manual_height-estimated_height = A altura estimada do seu headset é:
+onboarding-scaled_proportions-manual_height-next_step = Continue e salve
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = Redefinir as proporções de seu corpo
+onboarding-scaled_proportions-reset_proportion-description = Para definir as proporções do corpo com base na sua altura, agora é necessário redefinir todas as proporções. Isso limpará todas as proporções que você configurou e fornecerá uma configuração de referência.
+onboarding-scaled_proportions-done-title = Proporções do corpo definidas
+onboarding-scaled_proportions-done-description = As proporções do seu corpo agora devem ser configuradas com base em sua altura.
+
+## Stay Aligned setup
+
+onboarding-stay_aligned-put_trackers_on-next = Todos meus trackers estão ligados
 
 ## Home
 
@@ -1095,6 +1179,145 @@ status_system-StatusSteamVRDisconnected =
 status_system-StatusTrackerError = O tracker { $trackerName } tem um erro.
 status_system-StatusUnassignedHMD = O headset (HMD) deve ser designado como o tracker da cabeça.
 
+## Firmware tool globals
+
+firmware_tool-next_step = Próxima etapa
+firmware_tool-previous_step = Etapa anterior
+firmware_tool-ok = Parece bom
+firmware_tool-retry = Tentar novamente
+firmware_tool-loading = Carregando...
+
+## Firmware tool Steps
+
+firmware_tool = Ferramenta de Firmware DIY
+firmware_tool-description = Permite você configurar e fazer upload do firmware em seu tracker DIY
+firmware_tool-not_available = Oops, a ferramenta de firmware não está disponível no momento. Volte novamente mais tarde!
+firmware_tool-not_compatible = A ferramenta de firmware não é compativel com essa versão do servidor. Por favor, atualize o seu servidor!
+firmware_tool-board_step = Selecione sua placa
+firmware_tool-board_step-description = Selecione uma das placas listadas abaixo
+firmware_tool-board_pins_step = Verifique os pinos
+firmware_tool-board_pins_step-description =
+    Verifique se os pinos selecionados estão corretos.
+    Se você seguiu a documentação do SlimeVR, os valores pré-definidos devem estar corretos
+firmware_tool-board_pins_step-enable_led = Ligar LED
+firmware_tool-board_pins_step-led_pin =
+    .label = Pino do LED
+    .placeholder = Digite o endereço do pino do LED
+firmware_tool-board_pins_step-battery_type = Selecione o tipo de bateria
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Bateria externa
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Bateria Interna
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = MCP3021 Interna
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = Pino do sensor da bateria
+    .placeholder = Digite o endereço do pino do sensor da bateria
+firmware_tool-board_pins_step-battery_resistor =
+    .label = Resistor da bateria (Ohms)
+    .placeholder = Digite o valor do resistor da bateria
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = Proteção da bateria R1
+    .placeholder = Digite o valor da proteção da bateria R1
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = Proteção da bateria R2
+    .placeholder = Digite o valor da proteção da bateria R2
+firmware_tool-add_imus_step = Declare suas IMUs
+firmware_tool-add_imus_step-description = Se você seguiu a documentação do SlimeVR, os valores pré-definidos devem estar corretos
+firmware_tool-add_imus_step-imu_type-label = Tipo de IMU
+firmware_tool-add_imus_step-imu_type-placeholder = Selecione o tipo de IMU
+firmware_tool-add_imus_step-imu_rotation =
+    .label = Rotação da IMU (Graus)
+    .placeholder = O ângulo de rotação do IMU
+firmware_tool-add_imus_step-scl_pin =
+    .label = Pino SCL
+    .placeholder = Endereço do pino SCL
+firmware_tool-add_imus_step-sda_pin =
+    .label = Pino SDA
+    .placeholder = Endereço do Pino SDA
+firmware_tool-add_imus_step-int_pin =
+    .label = Pino INT
+    .placeholder = Endereço do pino INT
+firmware_tool-add_imus_step-optional_tracker =
+    .label = Tracker opcional
+firmware_tool-add_imus_step-show_less = Mostrar menos
+firmware_tool-add_imus_step-show_more = Mostrar mais
+firmware_tool-add_imus_step-add_more = Adicionar mais IMU's
+firmware_tool-select_firmware_step = Seleciona a versão do firmware
+firmware_tool-select_firmware_step-description = Por favor, escolha a versão do firmware deseja utilizar
+firmware_tool-select_firmware_step-show-third-party =
+    .label = Mostrar firmwares de terceiros
+firmware_tool-flash_method_step = Método de upload
+firmware_tool-flash_method_step-description = Por favor, selecione o método de upload que deseja utilizar
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = Use o método "over the air". Seu tracker usará o Wi-Fi para atualizar o firmware. Apenas funciona em trackers já configurados
+firmware_tool-flash_method_step-serial =
+    .label = Serial
+    .description = Use um cabo USB para atualizar seu tracker
+firmware_tool-flashbtn_step = Pressione o botão de boot
+firmware_tool-flashbtn_step-description = Antes de ir para o próximo passo, aqui estão algumas etapas que você necessita fazer
+firmware_tool-flashbtn_step-board_SLIMEVR = Deslige o tracker, tire de case (se tiver), conecte o cabo USB nesse computador, e tente seguir os seguintes passos de acordo com a revisão de sua placa SlimeVR
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Ligue o tracker enquanto faz curto no segundo pad retângular FLASH, no canto superior da placa, e o escudo de metal do microcontrolador
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Ligue o tracker enquanto faz curto no pad circular FLASH na parte superior da placa, e o escudo de metal do microcontrolador
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Ligue o tracker enquanto segura o botão FLASH na parte superior da placa
+firmware_tool-flashbtn_step-board_OTHER =
+    Antes de fazer a atualização, você provavelmente precisará colocar o tracker no modo bootloader.
+    Na maioria das vezes, isso significa pressionar o botão de boot na placa antes do iniciar o processo de atualização.
+    Se o processo de atualização expirar no começo da atualização, isso provavelmente significa que o tracker não estava no modo de bootloader
+    Consulte as instruções de atualização da sua placa para saber como ativar o modo boatloader
+firmware_tool-flash_method_ota-devices = Dispositivos OTA detectados:
+firmware_tool-flash_method_ota-no_devices = Não há placas que possam ser atualizadas por meio de OTA. Verifique se você selecionou o tipo correto de placa
+firmware_tool-flash_method_serial-wifi = Credenciais de Wi-Fi:
+firmware_tool-flash_method_serial-devices-label = Dispositivos seriais detectados:
+firmware_tool-flash_method_serial-devices-placeholder = Selecione um dispositivo serial
+firmware_tool-flash_method_serial-no_devices = Não há dispositivos seriais compatíveis detectados, verifique se o tracker está conectado
+firmware_tool-build_step = Compilando
+firmware_tool-build_step-description = O firmware está sendo compilado, aguarde
+firmware_tool-flashing_step = Atualizando
+firmware_tool-flashing_step-description = Seus trackers estão atualizando, por favor, siga as instruções na tela
+firmware_tool-flashing_step-flash_more = Atualizar mais trackers
+firmware_tool-flashing_step-exit = Sair
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = Criando a pasta de compilação
+firmware_tool-build-DOWNLOADING_FIRMWARE = Baixando o firmware
+firmware_tool-build-EXTRACTING_FIRMWARE = Extraindo o firmware
+firmware_tool-build-SETTING_UP_DEFINES = Configurando os defines
+firmware_tool-build-BUILDING = Compilando o firmware
+firmware_tool-build-SAVING = Salvando a compilação
+firmware_tool-build-DONE = Compilação concluída
+firmware_tool-build-ERROR = Não foi possível compilar o firmware
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = Baixando o firmware
+firmware_update-status-AUTHENTICATING = Autenticando com o mcu
+firmware_update-status-UPLOADING = Fazendo upload do firmware
+firmware_update-status-SYNCING_WITH_MCU = Sincronizando com o mcu
+firmware_update-status-REBOOTING = Aplicando a atualização
+firmware_update-status-PROVISIONING = Configurando as credenciais do Wi-Fi
+firmware_update-status-DONE = Atualização concluída!
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = Não foi possível localizar o dispositivo
+firmware_update-status-ERROR_TIMEOUT = O processo de atualização expirou o tempo limite
+firmware_update-status-ERROR_DOWNLOAD_FAILED = Não foi possível baixar o firmware
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = Não foi possível autenticar com o mcu
+firmware_update-status-ERROR_UPLOAD_FAILED = Não foi possível fazer o upload do firmware
+firmware_update-status-ERROR_PROVISIONING_FAILED = Não foi possível definir as credenciais do Wi-Fi
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = O método de atualização não é compatível
+firmware_update-status-ERROR_UNKNOWN = Erro desconhecido
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = Atualização do firmware
+firmware_update-devices = Dispositivos disponíveis
+firmware_update-devices-description = Selecione os trackers que deseja atualizar para a versão mais recente do firmware SlimeVR
+firmware_update-no_devices = Certifique-se de que os trackers que você deseja atualizar estejam LIGADOS e conectados ao Wi-Fi!
+firmware_update-changelog-title = Atualizando para { $version }
+firmware_update-looking_for_devices = Procurando dispositivos para atualizar...
+firmware_update-retry = Tentar novamente
+firmware_update-update = Atualizar trackers selecionados
+firmware_update-exit = Sair
+
 ## Tray Menu
 
 tray_menu-show = Mostrar
@@ -1122,3 +1345,9 @@ unknown_device-modal-description =
     Deseja conectá-lo ao SlimeVR?
 unknown_device-modal-confirm = Claro!
 unknown_device-modal-forget = Ignore-o
+
+## Error collection consent modal
+
+error_collection_modal-title = Podemos coletar erros?
+error_collection_modal-confirm = Eu concordo
+error_collection_modal-cancel = Eu não quero

gui/public/i18n/uk/translation.ftl

@@ -23,6 +23,8 @@ tips-find_tracker = Не знаєте який трекер вибирати? П
 tips-do_not_move_heels = Переконайтеся, що не рухаєте п'ятами під час запису!
 tips-file_select = Перетягніть файли для використання або <u>знайдіть</u>.
 tips-tap_setup = Ви можете повільно постукати 2 рази по трекеру, щоб вибрати його, замість того, щоб вибирати його з меню.
+tips-turn_on_tracker = Використовуєте офіційні трекери SlimeVR? Не забудьте <b><em>увімкнути трекер</em></b> після підключення до ПК!
+tips-failed_webgl = Не вдалося ініціалізувати WebGL.
 
 ## Body parts
 
@@ -48,6 +50,9 @@ body_part-LEFT_UPPER_LEG = Ліве стегно
 body_part-LEFT_LOWER_LEG = Ліва щиколотка
 body_part-LEFT_FOOT = Ліва нога
 
+## BoardType
+
+
 ## Proportions
 
 skeleton_bone-NONE = Нічого
@@ -80,7 +85,7 @@ skeleton_bone-ELBOW_OFFSET = Зміщення ліктя
 
 reset-reset_all = Скинути всі пропорції
 reset-full = Повне скидання
-reset-mounting = Скинути закріплення
+reset-mounting = Скинути положення
 reset-yaw = Скинути нахил
 
 ## Serial detection stuff
@@ -98,7 +103,7 @@ serial_detection-close = Закрити
 navbar-home = Домашня сторінка
 navbar-body_proportions = Пропорції тіла
 navbar-trackers_assign = Призначення трекера
-navbar-mounting = Калібрування закріплення
+navbar-mounting = Калібрування положення
 navbar-onboarding = Майстер налаштування
 navbar-settings = Параметри
 
@@ -122,6 +127,10 @@ widget-overlay-is_mirrored_label = Відображення накладання
 
 widget-drift_compensation-clear = Очистити компенсацію дрейфу
 
+## Widget: Clear Reset Mounting
+
+widget-clear_mounting = Очистити скидання положення
+
 ## Widget: Developer settings
 
 widget-developer_mode = Режим розробника
@@ -138,7 +147,11 @@ widget-developer_mode-more_info = Детальніше
 widget-imu_visualizer = Обертання
 widget-imu_visualizer-rotation_raw = Необроблене
 widget-imu_visualizer-rotation_preview = Попередній перегляд
-widget-imu_visualizer-rotation_hide = Приховати
+
+## Widget: Skeleton Visualizer
+
+widget-skeleton_visualizer-preview = Перегляд скелета
+widget-skeleton_visualizer-hide = Сховати
 
 ## Tracker status
 
@@ -148,6 +161,7 @@ tracker-status-error = Помилка
 tracker-status-disconnected = Відключено
 tracker-status-occluded = Закрито
 tracker-status-ok = OK
+tracker-status-timed_out = Минув час очікування
 
 ## Tracker status columns
 
@@ -165,9 +179,15 @@ tracker-table-column-url = URL
 ## Tracker rotation
 
 tracker-rotation-front = Спереду
+tracker-rotation-front_left = Ліва сторона передньої частини
+tracker-rotation-front_right = Права сторона передньої частини
 tracker-rotation-left = Зліва
 tracker-rotation-right = Справа
 tracker-rotation-back = Ззаду
+tracker-rotation-back_left = Ліва сторона задньої частини
+tracker-rotation-back_right = Права сторона задньої частини
+tracker-rotation-custom = Персональне
+tracker-rotation-overriden = (замінено скиданням положення)
 
 ## Tracker information
 
@@ -180,6 +200,7 @@ tracker-infos-hardware_rev = Ревізія обладнання
 tracker-infos-hardware_identifier = Ідентифікатор обладнання
 tracker-infos-imu = IMU Сенсор
 tracker-infos-board_type = Основна плата
+tracker-infos-network_version = Версія протоколу
 
 ## Tracker settings
 
@@ -188,9 +209,9 @@ tracker-settings-title = Налаштування трекеру
 tracker-settings-assignment_section = Призначення
 tracker-settings-assignment_section-description = До якої частини тіла призначенний трекер.
 tracker-settings-assignment_section-edit = Редагування призначення
-tracker-settings-mounting_section = Позиція закріпу
+tracker-settings-mounting_section = Позиція трекера
 tracker-settings-mounting_section-description = Де закріплено трекер?
-tracker-settings-mounting_section-edit = Редагувати закріплення
+tracker-settings-mounting_section-edit = Змінити місце розташування
 tracker-settings-drift_compensation_section = Дозволити компенсацію дрейфу
 tracker-settings-drift_compensation_section-description = Чи повинен цей трекер компенсувати свій дрейф, коли включена компенсація дрейфу?
 tracker-settings-drift_compensation_section-edit = Дозволити компенсацію дрейфу
@@ -199,6 +220,9 @@ tracker-settings-drift_compensation_section-edit = Дозволити компе
 tracker-settings-name_section = Ім'я трекера
 tracker-settings-name_section-description = Дайте йому миле прізвисько °^°
 tracker-settings-name_section-placeholder = Ліва нога NightyBeast
+tracker-settings-forget = Забути трекери
+tracker-settings-forget-description = Прибирає трекер із SlimeVR і забороняє йому підключатися до сервера до того, як він буде перезапущений. Конфігурацію трекера не буде втрачено.
+tracker-settings-forget-label = Забути трекери
 
 ## Tracker part card info
 
@@ -257,7 +281,7 @@ tracker_selection_menu-neck_warning-cancel = Скасувати
 
 ## Mounting menu
 
-mounting_selection_menu = Де ви хочете, щоб був цей трекер?
+mounting_selection_menu = Де ви хочете розташувати цей трекер?
 mounting_selection_menu-close = Закрити
 
 ## Sidebar settings
@@ -272,6 +296,8 @@ settings-sidebar-osc_router = OSC роутер
 settings-sidebar-osc_trackers = VRChat OSC трекери
 settings-sidebar-utils = Утиліти
 settings-sidebar-serial = Послідовна консоль
+settings-sidebar-appearance = Зовнішність
+settings-sidebar-notifications = Сповіщення
 
 ## SteamVR settings
 
@@ -286,10 +312,22 @@ settings-general-steamvr-description =
     Корисно для ігор або програм, які підтримують лише певні трекери.
 settings-general-steamvr-trackers-waist = Талія
 settings-general-steamvr-trackers-chest = Груди
-settings-general-steamvr-trackers-feet = Ступні
-settings-general-steamvr-trackers-knees = Коліна
-settings-general-steamvr-trackers-elbows = Лікті
-settings-general-steamvr-trackers-hands = Руки
+settings-general-steamvr-trackers-left_foot = Ліва ступня
+settings-general-steamvr-trackers-right_foot = Права ступня
+settings-general-steamvr-trackers-left_knee = Ліве коліно
+settings-general-steamvr-trackers-right_knee = Праве коліно
+settings-general-steamvr-trackers-left_elbow = Лівий лікоть
+settings-general-steamvr-trackers-right_elbow = Правий лікоть
+settings-general-steamvr-trackers-left_hand = Ліва рука
+settings-general-steamvr-trackers-right_hand = Права рука
+settings-general-steamvr-trackers-tracker_toggling = Автоматичне призначення трекерів
+settings-general-steamvr-trackers-tracker_toggling-description = Автоматично займається увімкненням та вимкненням трекерів SlimeVR залежно від поточних призначень ваших трекерів
+settings-general-steamvr-trackers-tracker_toggling-label = Автоматичне призначення трекерів
+settings-general-steamvr-trackers-hands-warning =
+    <b>Увага:</b> трекери рук перевизначать ваші контролери.
+    Ви впевнені?
+settings-general-steamvr-trackers-hands-warning-cancel = Скасувати
+settings-general-steamvr-trackers-hands-warning-done = Так
 
 ## Tracker mechanics
 
@@ -307,6 +345,7 @@ settings-general-tracker_mechanics-filtering-type-smoothing-description = Згл
 settings-general-tracker_mechanics-filtering-type-prediction = Передбачення
 settings-general-tracker_mechanics-filtering-type-prediction-description = Зменшує затримку і робить рухи більш швидкими, але може посилити тремтіння.
 settings-general-tracker_mechanics-filtering-amount = Кількість
+settings-general-tracker_mechanics-yaw-reset-smooth-time = Час згладжування скидання рискання (0 сек. відключає згладжування)
 settings-general-tracker_mechanics-drift_compensation = Компенсація дрейфу
 # This cares about multilines
 settings-general-tracker_mechanics-drift_compensation-description =
@@ -315,6 +354,11 @@ settings-general-tracker_mechanics-drift_compensation-description =
 settings-general-tracker_mechanics-drift_compensation-enabled-label = Компенсація дрейфу
 settings-general-tracker_mechanics-drift_compensation-amount-label = Сума компенсації
 settings-general-tracker_mechanics-drift_compensation-max_resets-label = Використання до x останніх скидань
+settings-general-tracker_mechanics-save_mounting_reset = Зберегти автоматичне калібрування положення трекерів
+settings-general-tracker_mechanics-save_mounting_reset-description =
+    Зберігає калібрування положення трекерів на тілі між перезавантаженнями. Корисний
+    при носінні костюма, в якому трекери не переміщаються між сесіями. <b>Не рекомендується для звичайних користувачів!</b>
+settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Зберегти калібрування положення
 
 ## FK/Tracking settings
 
@@ -336,23 +380,45 @@ settings-general-fk_settings-leg_tweak-floor_clip-description = Прив'язк
 settings-general-fk_settings-leg_tweak-toe_snap-description = Корекція пальців ноги намагається вгадати обертання ваших ступень, якщо трекери для них не використовуються
 settings-general-fk_settings-leg_tweak-foot_plant-description = Корекція ступні повертає ваші ступні так, щоб вони були паралельні землі при контакті
 settings-general-fk_settings-leg_fk = Трекінг ноги
+settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Активуйте скидання положення стопи, піднявшись навшпиньки.
+settings-general-fk_settings-leg_fk-reset_mounting_feet = Скинути положення стопи
 settings-general-fk_settings-arm_fk = Трекінг руки
 settings-general-fk_settings-arm_fk-description = Намагатися відстежувати руки за допомогою шолома, навіть якщо є інформація о позиції руки
 settings-general-fk_settings-arm_fk-force_arms = Відстеження рук з шолома
-settings-general-fk_settings-skeleton_settings = Налаштування скелета
+settings-general-fk_settings-reset_settings = Скинути налаштування
+settings-general-fk_settings-reset_settings-reset_hmd_pitch-description = Скидає тангаж шолому (вертикальне обертання). Корисно, якщо носити шолом на лобі для вітюбінга або мокап. Не вмикати для VR.
+settings-general-fk_settings-reset_settings-reset_hmd_pitch = Скинути тангаж шолому
+settings-general-fk_settings-arm_fk-reset_mode-description = Змініть позу руки, яка очікується для скидання налаштувань положення.
+settings-general-fk_settings-arm_fk-back = Назад
+settings-general-fk_settings-arm_fk-back-description = Стандартний режим: плечі ззаду, а передпліччя спереду.
+settings-general-fk_settings-arm_fk-tpose_up = Т-поза (вгору)
+settings-general-fk_settings-arm_fk-tpose_up-description = Очікується, що ваші руки будуть опущені з боків під час повного скидання, та на 90 градусів у сторони під час скидання положення.
+settings-general-fk_settings-arm_fk-tpose_down = Т-поза (вниз)
+settings-general-fk_settings-arm_fk-tpose_down-description = Очікується, що ваші руки будуть піднятими в сторони на 90 градусів під час повного скидання, та опущені з боків під час скидання положення.
+settings-general-fk_settings-arm_fk-forward = Вперед
+settings-general-fk_settings-arm_fk-forward-description = Очікується, що ваші руки будуть підняті вперед на 90 градусів. Корисно для вітюбінга.
+settings-general-fk_settings-skeleton_settings-toggles = Перемикачі скелета
 settings-general-fk_settings-skeleton_settings-description = Увімкніть або вимкніть налаштування скелета. Рекомендується залишити їх увімкненими.
-settings-general-fk_settings-skeleton_settings-extended_spine = Подовжений хребет
-settings-general-fk_settings-skeleton_settings-extended_pelvis = Розширений таз
-settings-general-fk_settings-skeleton_settings-extended_knees = Подовжене коліно
-settings-general-fk_settings-vive_emulation-title = Емуляція Vive
-settings-general-fk_settings-vive_emulation-description = Емуляція проблем з трекером талії, які є у трекерів Vive. Це жарт і погіршує відстеження.
-settings-general-fk_settings-vive_emulation-label = Увімкнути емуляцію Vive
+settings-general-fk_settings-skeleton_settings-extended_spine_model = Подовжена модель хребта
+settings-general-fk_settings-skeleton_settings-extended_pelvis_model = Розширена модель тазу
+settings-general-fk_settings-skeleton_settings-extended_knees_model = Подовжена модель коліна
+settings-general-fk_settings-skeleton_settings-ratios = Співвідношення скелета
+settings-general-fk_settings-skeleton_settings-ratios-description = Змініть параметри скелета. Можливо, вам доведеться скоригувати пропорції після їхньої зміни.
+settings-general-fk_settings-skeleton_settings-impute_waist_from_chest_hip = Розрахувати талію від грудей до стегон
+settings-general-fk_settings-skeleton_settings-impute_waist_from_chest_legs = Розрахувати талію від грудей до ніг
+settings-general-fk_settings-skeleton_settings-impute_hip_from_chest_legs = Розрахувати стегно від грудей до ніг
+settings-general-fk_settings-skeleton_settings-impute_hip_from_waist_legs = Розрахувати стегно від талії до ніг
+settings-general-fk_settings-skeleton_settings-interp_hip_legs = Інтерполяція рискання та крену стегн з ногами
+settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Інтерполяція рискання та крену трекерів на колінах та щиколотках
+settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Інтерполяція рискання та крену колін з щиколотками
+settings-general-fk_settings-self_localization-title = Режим Мокап
+settings-general-fk_settings-self_localization-description = Режим Мокап дозволяє скелету приблизно відстежувати власне положення без використання шолому або інших трекерів. Зверніть увагу, що для цього потрібні трекери ніг і голови, і це все ще експериментальний метод.
 
 ## Gesture control settings (tracker tapping)
 
 settings-general-gesture_control = Управління жестами
 settings-general-gesture_control-subtitle = Скидання на основі дотику
-settings-general-gesture_control-description = Дозволяє запускати скидання, торкнувшись трекера. Трекер найвищий на вашому тулубі використовується для скидання нахилу, трекер найвищий на лівій нозі використовується для повного скидання, а трекер найвищий на правій нозі використовується для скидання закріплення. Слід зазначити, що дотики повинні відбутися протягом 0,6 секунди для реєстрації.
+settings-general-gesture_control-description = Дозволяє запускати скидання, торкнувшись трекера. Трекер найвищий на вашому тулубі використовується для скидання рискання, трекер найвищий на лівій нозі використовується для повного скидання, а трекер найвищий на правій нозі використовується для скидання положення. Слід зазначити, що для реєстрації дотики мають тривати протягом 0,3 секунди.
 # This is a unit: 3 taps, 2 taps, 1 tap
 # $amount (Number) - Amount of taps (touches to the tracker's case)
 settings-general-gesture_control-taps =
@@ -368,16 +434,35 @@ settings-general-gesture_control-yawResetTaps = Дотики для скидан
 settings-general-gesture_control-fullResetEnabled = Увімкнути дотик для повного скидання
 settings-general-gesture_control-fullResetDelay = Затримка повного скидання
 settings-general-gesture_control-fullResetTaps = Дотики для повного скидання
-settings-general-gesture_control-mountingResetEnabled = Увімкнути дотик для скидання прив'язки
-settings-general-gesture_control-mountingResetDelay = Затримка скидання прив'язки
-settings-general-gesture_control-mountingResetTaps = Дотики для скидання прив'язки
+settings-general-gesture_control-mountingResetEnabled = Увімкнути дотик для скидання положення
+settings-general-gesture_control-mountingResetDelay = Затримка скидання положення
+settings-general-gesture_control-mountingResetTaps = Дотики для скидання положення
+# The number of trackers that can have higher acceleration before a tap is rejected
+settings-general-gesture_control-numberTrackersOverThreshold = Трекери перевищують поріг
+settings-general-gesture_control-numberTrackersOverThreshold-description = Збільште це значення, якщо не працює виявлення дотика. Не збільшуйте його вище ніж необхідно для виявлення дотика, оскільки це призведе до більшої кількості помилкових спрацьовувань.
 
-## Interface settings
+## Appearance settings
 
-settings-general-interface = Інтерфейс
+settings-interface-appearance = Зовнішність
 settings-general-interface-dev_mode = Режим розробника
 settings-general-interface-dev_mode-description = Цей режим може бути корисним, якщо вам потрібні поглиблені дані або для взаємодії з підключеними трекерами на більш просунутому рівні.
 settings-general-interface-dev_mode-label = Режим розробника
+settings-general-interface-theme = Варіація оформлення
+settings-general-interface-lang = Виберіть мову
+settings-general-interface-lang-description = Змініть мову за замовчуванням, яку ви хочете використовувати.
+settings-general-interface-lang-placeholder = Виберіть мову для використання
+# Keep the font name untranslated
+settings-interface-appearance-font = Шрифт GUI
+settings-interface-appearance-font-description = Це змінює шрифт, який використовується інтерфейсом.
+settings-interface-appearance-font-placeholder = Шрифт за замовчуванням
+settings-interface-appearance-font-os_font = Шрифт операційної системи
+settings-interface-appearance-font-slime_font = Шрифт за замовчуванням
+settings-interface-appearance-font_size = Базове масштабування шрифту
+settings-interface-appearance-font_size-description = Це впливає на розмір шрифту всього інтерфейсу, крім цієї панелі налаштувань.
+
+## Notification settings
+
+settings-interface-notifications = Повідомлення
 settings-general-interface-serial_detection = Виявлення послідовного пристрою
 settings-general-interface-serial_detection-description = Цей параметр відображатиме спливаюче вікно кожного разу, коли ви підключаєте новий послідовний пристрій, який може бути трекером. Це допомагає покращити процес налаштування трекера.
 settings-general-interface-serial_detection-label = Виявлення послідовного пристрою
@@ -385,10 +470,21 @@ settings-general-interface-feedback_sound = Звук зворотного зв'
 settings-general-interface-feedback_sound-description = Ця опція відтворюватиме звуковий сигнал при спрацьовуванні скидання
 settings-general-interface-feedback_sound-label = Звук зворотного зв'язку
 settings-general-interface-feedback_sound-volume = Гучність звуку зворотного зв'язку
-settings-general-interface-theme = Варіація оформлення
-settings-general-interface-lang = Виберіть мову
-settings-general-interface-lang-description = Змініть мову за замовчуванням, яку ви хочете використовувати.
-settings-general-interface-lang-placeholder = Виберіть мову для використання
+settings-general-interface-connected_trackers_warning = Попередження про підключені трекери
+settings-general-interface-connected_trackers_warning-description = Ця опція відображатиме спливаюче вікно кожного разу, коли ви намагатиметеся вийти зі SlimeVR, якщо підключено один або декілька трекерів. Він нагадує вам вимкнути ваші трекери, коли ви закінчите, щоб зберегти заряд батареї.
+settings-general-interface-connected_trackers_warning-label = Попередження про підключені трекери під час виходу
+
+## Behavior settings
+
+settings-general-interface-dev_mode = Режим розробника
+settings-general-interface-dev_mode-description = Цей режим може бути корисним, якщо вам потрібні поглиблені дані або для взаємодії з підключеними трекерами на більш просунутому рівні.
+settings-general-interface-dev_mode-label = Режим розробника
+settings-general-interface-use_tray = Згорнути в системний трей
+settings-general-interface-use_tray-description = Дозволяє закрити вікно, не закриваючи сервер SlimeVR, так що ви можете продовжувати використати його, не турбуючись про інтерфейс.
+settings-general-interface-use_tray-label = Згорнути в системний трей
+settings-general-interface-discord_presence = Ділитися активністю в Discord
+settings-general-interface-discord_presence-description = Повідомляє вашому клієнту Discord, що ви використовуєте SlimeVR, а також передає кількість трекерів IMU, які ви використовуєте.
+settings-general-interface-discord_presence-label = Ділитися активністю в Discord
 
 ## Serial settings
 
@@ -410,6 +506,9 @@ settings-serial-factory_reset-warning-cancel = Скасувати
 settings-serial-get_infos = Отримати інформацію
 settings-serial-serial_select = Вибір послідовного порту
 settings-serial-auto_dropdown_item = Автоматично
+settings-serial-get_wifi_scan = Сканувати мережу Wi-Fi
+settings-serial-file_type = Простий текст
+settings-serial-save_logs = Зберегти у файл
 
 ## OSC router settings
 
@@ -439,15 +538,11 @@ settings-osc-router-network-address-placeholder = IPV4-адреса
 ## OSC VRChat settings
 
 settings-osc-vrchat = VRChat OSC трекери
-# This cares about multilines
-settings-osc-vrchat-description =
-    Змініть специфічні для VRChat налаштування для отримання даних шолому та надсилання
-    даних трекерів для FBT без SteamVR (наприклад, автономний Quest).
 settings-osc-vrchat-enable = Увімкнути
 settings-osc-vrchat-enable-description = Перемикайте відправку та отримання даних.
 settings-osc-vrchat-enable-label = Увімкнути
 settings-osc-vrchat-network = Мережеві порти
-settings-osc-vrchat-network-description = Встановіть порти для прослуховування і відправки даних в VRChat.
+settings-osc-vrchat-network-description-v1 = Встановіть порти для прослуховування і відправки даних. Можна залишити без змін для VRChat.
 settings-osc-vrchat-network-port_in =
     .label = Вхідний Порт
     .placeholder = Вхідний Порт (зазвичай: 9001)
@@ -455,7 +550,7 @@ settings-osc-vrchat-network-port_out =
     .label = Вихідний Порт
     .placeholder = Вихідний Порт (зазвичай: 9000)
 settings-osc-vrchat-network-address = Мережева адреса
-settings-osc-vrchat-network-address-description = Виберіть, за якою адресою надсилати дані до VRChat (перевірте налаштування Wi-Fi на своєму пристрої).
+settings-osc-vrchat-network-address-description-v1 = Виберіть, за якою адресою надсилати дані. Можна залишити без змін для VRChat.
 settings-osc-vrchat-network-address-placeholder = IP-адреса VRChat
 settings-osc-vrchat-network-trackers = Трекери
 settings-osc-vrchat-network-trackers-description = Перемикання відправку конкретних трекерів через OSC.
@@ -488,16 +583,16 @@ settings-osc-vmc-network-address-description = Виберіть, за якою
 settings-osc-vmc-network-address-placeholder = IPV4-адреса
 settings-osc-vmc-vrm = Модель VRM
 settings-osc-vmc-vrm-description = Завантажте модель VRM, щоб дозволити головний якір і забезпечити більш високу сумісність з іншими програмами
-settings-osc-vmc-vrm-model_unloaded = Модель не завантажена
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Модель завантажена: { $name }
-       *[other] Завантажена модель без назви
-    }
 settings-osc-vmc-vrm-file_select = Перетягніть модель для використання або <u>знайдіть</u>
 settings-osc-vmc-anchor_hip = Якір у стегон
 settings-osc-vmc-anchor_hip-description = Закріпіть стеження на стегнах, корисно для сидячих VTubing. Якщо вимкнено, завантажте модель VRM.
 settings-osc-vmc-anchor_hip-label = Якір у стегон
+settings-osc-vmc-mirror_tracking = Дзеркальний трекінг
+settings-osc-vmc-mirror_tracking-description = Віддзеркалити трекери горизонтально.
+settings-osc-vmc-mirror_tracking-label = Дзеркальний трекінг
+
+## Advanced settings
+
 
 ## Setup/onboarding menu
 
@@ -530,7 +625,7 @@ onboarding-wifi_creds-password =
 
 ## Mounting setup
 
-onboarding-reset_tutorial-back = Повернутися до розділу Калібрування прив'язки
+onboarding-reset_tutorial-back = Повернутися до калібрування положення
 onboarding-reset_tutorial = Інструкція по скиданню
 onboarding-reset_tutorial-explanation = Коли ви використовуєте свої трекери, вони можуть вийти з вирівнювання через дрейф нахилу IMU або тому, що ви могли їх фізично перемістити. Це можна виправити кількома способами.
 onboarding-reset_tutorial-skip = Пропустити крок
@@ -541,17 +636,17 @@ onboarding-reset_tutorial-0 =
     Це змусить трекери дивитися в тому ж напрямку, що і ваш шолом.
 # Cares about multiline
 onboarding-reset_tutorial-1 =
-    Торкніться { $taps } виділеного трекера, щоб ініціювати повне скидання.
+    Торкніться { $taps } разів виділеного трекера, щоб ініціювати повне скидання.
     
-    Для цього потрібно стояти (i-поза). Існує затримка 3 секунди (налаштовується), перш ніж це дійсно станеться.
-    Це повністю скидає положення та обертання всіх ваших трекерів. Це має вирішити більшість проблем.
+    Для цього потрібно стояти (i-поза). Існує затримка 3 секунди (можна налаштувати), перш ніж воно спрацює.
+    Це повністю скидає розташування всіх ваших трекерів, та має вирішити більшість проблем.
 # Cares about multiline
 onboarding-reset_tutorial-2 =
-    Торкніться { $taps } виділеного елемента стеження, щоб активувати скидання прив'язки.
+    Торкніться { $taps } разів виділеного трекеру, щоб активувати скидання положення.
     
-    Скидання прив'язки допомагає в тому, як трекери насправді надягнені на вас, тому, якщо ви випадково перемістили їх і змінили місце прикріплення на велику кількість, це допоможе.
+    Скидання положення допомагає в тому, як трекери насправді надягнені на вас, тому, якщо ви випадково перемістили їх та змінили місце розташування, це допоможе.
     
-    Вам потрібно бути в позі, ніби ви катаєтеся на лижах, як показано на майстрі автоматичної прив'язки, і у вас є 3-секундна затримка (налаштовується), перш ніж вона спрацює.
+    Вам потрібно бути в позі, ніби ви катаєтеся на лижах, як показано на майстрі автоматичної прив'язки положення. У вас є затримка у 3 секунди (можна налаштувати), перш ніж спрацює скидання.
 
 ## Setup start
 
@@ -575,8 +670,8 @@ onboarding-done-close = Закрити налаштування
 
 onboarding-connect_tracker-back = Повернутися до даних Wi-Fi
 onboarding-connect_tracker-title = Підключіть трекери
-onboarding-connect_tracker-description-p0 = Тепер перейдемо до найцікавішого, з'єднання усіх трекерів!
-onboarding-connect_tracker-description-p1 = Просто підключіть все, що ще не підключено, через USB-порт.
+onboarding-connect_tracker-description-p0-v1 = Тепер найцікавіше – підключення трекерів!
+onboarding-connect_tracker-description-p1-v1 = Підключіть кожен трекер по одному через USB-порт.
 onboarding-connect_tracker-issue-serial = У мене виникли проблеми з підключенням!
 onboarding-connect_tracker-usb = USB-трекер
 onboarding-connect_tracker-connection_status-none = Шукаємо трекери
@@ -619,8 +714,8 @@ onboarding-assignment_tutorial = Як підготувати Slime трекер
 onboarding-assignment_tutorial-first_step = 1. Розмістіть наліпку з частиною тіла (якщо вона у вас є) на трекері відповідно до вашого вибору
 # This text has a character limit of around 11 characters, so please keep it short
 onboarding-assignment_tutorial-sticker = Наліпка
-onboarding-assignment_tutorial-second_step = 2. Прикріпіть ремінь до трекера, зберігаючи гачок і петльову сторону лицьової сторони ремінця в такій орієнтації:
-onboarding-assignment_tutorial-second_step-continuation = Гачок і петльова сторона для подовжувача повинні бути в такій орієнтації:
+onboarding-assignment_tutorial-second_step-v2 = 2. Прикріпіть ремінець до трекера, тримаючи липучку в тому ж напрямку, що й лицьова сторона вашого трекера:
+onboarding-assignment_tutorial-second_step-continuation-v2 = Сторона з липучкою додаткового модуля повинна дивитися вгору, як на зображенні нижче:
 onboarding-assignment_tutorial-done = Я наклеїв наліпки і закріпив ремінці!
 
 ## Tracker assignment setup
@@ -640,6 +735,7 @@ onboarding-assign_trackers-assigned =
     }
 onboarding-assign_trackers-advanced = Відобразити розширені розташування призначень
 onboarding-assign_trackers-next = Я призначив усі трекери
+onboarding-assign_trackers-mirror_view = Дзеркальний вигляд
 
 ## Tracker assignment warnings
 
@@ -659,23 +755,26 @@ onboarding-assign_trackers-warning-LEFT_FOOT =
 
 ## Tracker mounting method choose
 
-onboarding-choose_mounting = Який метод калібрування закріплення використовувати?
+onboarding-choose_mounting = Який спосіб калібрування положення використовувати?
 # Multiline text
 onboarding-choose_mounting-description = Орієнтація кріплення коригується для розміщення трекерів на вашому тілі.
-onboarding-choose_mounting-auto_mounting = Автоматична прив'язка
-# Italized text
-onboarding-choose_mounting-auto_mounting-label = Експериментальний
-onboarding-choose_mounting-auto_mounting-description = Це автоматично визначить напрямки прив'язки для всіх ваших трекерів з 2 поз
-onboarding-choose_mounting-manual_mounting = Ручна прив'язка
-# Italized text
-onboarding-choose_mounting-manual_mounting-label = Рекомендується
-onboarding-choose_mounting-manual_mounting-description = Це дозволить вибрати напрямок прив'язки вручну для кожного трекера
+onboarding-choose_mounting-auto_mounting = Автоматична прив'язка положення
+onboarding-choose_mounting-auto_mounting-description = Це автоматично визначить орієнтацію всіх ваших трекерів з 2 поз
+onboarding-choose_mounting-manual_mounting = Самостійна прив'язка
+onboarding-choose_mounting-manual_mounting-description = Це дозволить обрати орієнтацію кожного трекера самостійно
+# Multiline text
+onboarding-choose_mounting-manual_modal-title =
+    Ви впевнені, що хочете зробити
+    автоматичне калібрування положення?
+onboarding-choose_mounting-manual_modal-description = <b>Самостійне калібрування положення рекомендується для нових користувачів</b>, оскільки пози автоматичного калібрування положення можуть вимагати певної практики.
+onboarding-choose_mounting-manual_modal-confirm = Я знаю, що роблю
+onboarding-choose_mounting-manual_modal-cancel = Скасувати
 
 ## Tracker manual mounting setup
 
 onboarding-manual_mounting-back = Повернутися до VR
-onboarding-manual_mounting = Ручне закріплення
-onboarding-manual_mounting-description = Натисніть на кожен трекер і виберіть, в який бік вони прив'язані
+onboarding-manual_mounting = Самостійна прив'язка
+onboarding-manual_mounting-description = Натисніть на кожен трекер і виберіть, як вони розташовані
 onboarding-manual_mounting-auto_mounting = Автоматична прив'язка
 onboarding-manual_mounting-next = Наступний крок
 
@@ -686,10 +785,7 @@ onboarding-automatic_mounting-next = Наступний крок
 onboarding-automatic_mounting-prev_step = Попередній крок
 onboarding-automatic_mounting-done-restart = Спробуйте знову
 
-## Tracker proportions method choose
-
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 
 ## Tracker automatic proportions setup
@@ -711,8 +807,57 @@ onboarding-automatic_proportions-recording-timer =
 onboarding-automatic_proportions-verify_results-title = Перевірити результати
 onboarding-automatic_proportions-verify_results-processing = Обробка результату
 
+## Tracker scaled proportions setup
+
+
+## Tracker scaled proportions reset
+
+
+## Stay Aligned setup
+
+
 ## Home
 
 
+## Trackers Still On notification
+
+
 ## Status system
 
+
+## Firmware tool globals
+
+
+## Firmware tool Steps
+
+
+## firmware tool build status
+
+
+## Firmware update status
+
+
+## Dedicated Firmware Update Page
+
+
+## Tray Menu
+
+
+## First exit modal
+
+tray_or_exit_modal-radio-exit = Вийти після закриття
+tray_or_exit_modal-radio-tray = Згорнути в системний трей
+tray_or_exit_modal-submit = Зберегти
+tray_or_exit_modal-cancel = Скасувати
+
+## Unknown device modal
+
+unknown_device-modal-title = Знайдено новий трекер!
+unknown_device-modal-description =
+    З'явився новий трекер із MAC-адресою <b>{ $deviceId }</b>.
+    Бажаєте підключити його до SlimeVR?
+unknown_device-modal-confirm = Звісно!
+unknown_device-modal-forget = Ігнорувати
+
+## Error collection consent modal
+

gui/public/i18n/vi/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = Đang kết nối với máy chủ
 websocket-connection_lost = Kết nối với máy chủ đã mất. Đang kết nối lại...
+websocket-connection_lost-desc = Máy chủ SlimeVR bị dừng. Hãy kiểm tra nhật ký logs và khởi động lại chương trình.
+websocket-timedout = Không thể tìm thấy máy chủ
+websocket-timedout-desc = Có vẻ như máy chủ SlimeVR đã bị sập hoặc hết thời gian chờ. Vui lòng kiểm tra nhật ký logs và khởi động lại chương trình.
+websocket-error-close = Thoát SlimeVR
+websocket-error-logs = Mở thư mục nhật ký logs
 
 ## Update notification
 
@@ -50,6 +55,11 @@ body_part-LEFT_UPPER_LEG = Bắp chân trái
 body_part-LEFT_LOWER_LEG = Cẳng chân trái
 body_part-LEFT_FOOT = Bàn chân trái
 
+## BoardType
+
+board_type-MOCOPI = Sony Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+
 ## Proportions
 
 skeleton_bone-NONE = Chưa được gán
@@ -421,9 +431,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Tính
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Tính trung bình của chiều quay đầu gối ngáp và lăn bằng mắt cá chân '
 settings-general-fk_settings-self_localization-title = Chế độ Mocap
 settings-general-fk_settings-self_localization-description = Chế độ Mocap cho phép bộ xương theo dõi đại khái vị trí của chính nó mà không cần kính VR hoặc các thiết bị theo dõi khác. Lưu ý rằng điều này yêu cầu bộ theo dõi chân và đầu để hoạt động và chức năng này vẫn đang trong quá trình thử nghiệm.
-settings-general-fk_settings-vive_emulation-title = Giả lập tracker Vive
-settings-general-fk_settings-vive_emulation-description = Giả lập cách tracker của Vive gặp vấn đề với việc theo dõi eo, đây là 1 tính năng được làm cho vui và sẽ làm giảm độ chính xác
-settings-general-fk_settings-vive_emulation-label = Giả lập tracker Vive
 
 ## Gesture control settings (tracker tapping)
 
@@ -485,6 +492,12 @@ settings-general-interface-feedback_sound-volume = Âm lượng phản hồi
 settings-general-interface-connected_trackers_warning = Cảnh báo với thiết bị đã kết nối
 settings-general-interface-connected_trackers_warning-description = Tùy chọn này sẽ hiển thị cửa sổ bật lên mỗi khi bạn thử thoát khỏi SlimeVR trong khi có một hoặc nhiều thiết bị theo dõi được kết nối. Nó nhắc nhở bạn tắt trình theo dõi khi bạn hoàn tất để duy trì tuổi thọ pin.
 settings-general-interface-connected_trackers_warning-label = Cảnh báo thiết bị đã kết nối khi thoát chương trình
+
+## Behavior settings
+
+settings-general-interface-dev_mode = Chế độ nhà phát triển
+settings-general-interface-dev_mode-description = Hữu dụng nếu cần thêm thông tin chi tiết của tracker hay can thiệp sâu hơn vào tracker
+settings-general-interface-dev_mode-label = Chế độ nhà phát triển
 settings-general-interface-use_tray = Thu nhỏ vào khay hệ thống
 settings-general-interface-use_tray-description = Cho phép bạn đóng cửa sổ mà không cần đóng máy chủ SlimeVR để bạn có thể tiếp tục sử dụng nó mà không bị GUI làm phiền.
 settings-general-interface-use_tray-label = Thu nhỏ vào khay hệ thống
@@ -601,12 +614,6 @@ settings-osc-vmc-network-address-description = Chọn địa chỉ để gửi d
 settings-osc-vmc-network-address-placeholder = Địa chỉ IPV4
 settings-osc-vmc-vrm = Model VRM
 settings-osc-vmc-vrm-description = Tải mô hình VRM để cho phép neo đầu và cho phép khả năng tương thích cao hơn với các ứng dụng khác.
-settings-osc-vmc-vrm-model_unloaded = Chưa có mô hình tải lên
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] Mô hình đã được tải: { $name }
-       *[other] Mô hình chưa có tiêu đề đã được tải
-    }
 settings-osc-vmc-vrm-file_select = Kéo và thả mô hình để sử dụng hoặc <u>duyệt file</u>
 settings-osc-vmc-anchor_hip = Cố định ở hông
 settings-osc-vmc-anchor_hip-description = Cố định theo dõi ở hông, hữu ích cho VTubing ngồi. Nếu tắt, hãy tải mô hình VRM.
@@ -622,8 +629,6 @@ settings-utils-advanced-reset-gui = Đặt lại cài đặt GUI
 settings-utils-advanced-reset-all-label = Đặt lại tất cả
 settings-utils-advanced-reset_warning-reset = Đặt lại cài đặt
 settings-utils-advanced-reset_warning-cancel = Hủy
-settings-utils-advanced-open_data = Thư mục dữ liệu
-settings-utils-advanced-open_data-description = Mở thư mục dữ liệu của SlimeVR trong tệp, chứa các tệp cấu hình và logs.
 settings-utils-advanced-open_data-label = Mở thư mục
 
 ## Setup/onboarding menu
@@ -731,7 +736,6 @@ onboarding-connect_tracker-next = Đã kết nối với tất cả tracker
 
 onboarding-calibration_tutorial = Hướng dẫn hiệu chuẩn IMU
 onboarding-calibration_tutorial-subtitle = Cái này sẽ giúp giảm trôi trượt theo dõi!
-onboarding-calibration_tutorial-description = Mỗi khi bạn bật thiết bị theo dõi, chúng cần nghỉ ngơi một lúc trên bề mặt phẳng để hiệu chỉnh. Hãy làm điều tương tự bằng cách nhấp vào nút "{ onboarding-calibration_tutorial-calibrate }", <b>và không di chuyển chúng!</b>
 onboarding-calibration_tutorial-calibrate = Tôi đã đặt thiết bị theo dõi của mình lên bàn
 onboarding-calibration_tutorial-status-waiting = Đang chờ bạn hoàn thành
 onboarding-calibration_tutorial-status-calibrating = Đang hiệu chuẩn
@@ -895,44 +899,14 @@ onboarding-automatic_mounting-mounting_reset-title = Đặt lại hướng gắn
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. Đứng khom người như tư thế trượt tuyết với đầu gối khom lại, thân trên hướng tới trước và hai tay co lại để giữ thăng bằng như hình bên
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. Nhấn nút đặt lại và chờ 3 giây trước khi hệ thống cân chỉnh hướng gắn tracker
 onboarding-automatic_mounting-preparation-title = Chuẩn bị tư thế
-onboarding-automatic_mounting-preparation-step-0 = 1. Đứng thẳng với hai tay duỗi thẳng
-onboarding-automatic_mounting-preparation-step-1 = 2. Nhấn nút đặt lại và chờ 3 giây trước khi tracker được đặt lại.
 onboarding-automatic_mounting-put_trackers_on-title = Đeo tracker lên người
 onboarding-automatic_mounting-put_trackers_on-description = Để cân chỉnh hướng gắn của tracker, SlimeVR sẽ tiến hành đo góc nghiêng của tracker khi đang đeo để cân chỉnh hướng gắn, hãy đeo tracker theo đúng vị trí đã thiết lập
 onboarding-automatic_mounting-put_trackers_on-next = Tiếp tục
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = Phương pháp hiệu chuẩn tỷ lệ nào để sử dụng?
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    Tỷ lệ cơ thể được sử dụng để biết các số đo của cơ thể bạn. Họ được yêu cầu tính toán vị trí của trình theo dõi.
-    Khi tỷ lệ cơ thể của bạn không khớp với tỷ lệ được lưu, độ chính xác theo dõi của bạn sẽ kém hơn và bạn sẽ nhận thấy những thứ như trượt băng hoặc trượt, hoặc cơ thể của bạn không khớp với hình đại diện của bạn.
-    <b>Bạn chỉ cần đo cơ thể của bạn một lần!</b> Trừ khi chúng sai hoặc cơ thể bạn đã thay đổi, thì bạn không cần phải làm lại.
-onboarding-choose_proportions-auto_proportions = Đo kích thước cơ thể tự động
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = Khuyến khích dùng
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    Tính năng này sẽ đoán tỷ lệ cơ thể của bạn bằng cách ghi lại một mẫu chuyển động của bạn và chuyển nó qua một thuật toán.
-    
-    <b>Tính năng này sẽ yêu cầu headset của bạn (HMD) được kết nối với SlimeVR và đang nằm ở trên đầu của bạn!</b>
-onboarding-choose_proportions-manual_proportions = Đo kích thước cơ thể thủ công
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = Cho chính xác
-onboarding-choose_proportions-manual_proportions-description = Tính năng này sẽ cho phép bạn điều chỉnh tỉ lệ cơ thể của mình theo cách thủ công bằng cách chỉnh sửa các con số một cách trực tiếp
-onboarding-choose_proportions-export = Xuất tỉ lệ cơ thể
-onboarding-choose_proportions-import = Nhập tỉ lệ cơ thể
-onboarding-choose_proportions-import-success = Đã được nhập
-onboarding-choose_proportions-import-failed = Thất bại
-onboarding-choose_proportions-file_type = File tỉ lệ cơ thể
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = Quay lại cân chỉnh hướng gắn
 onboarding-manual_proportions-title = Đo kích thước cơ thể thủ công
-onboarding-manual_proportions-precision = Cân chỉnh cụ thể (giảm hệ số chỉnh)
-onboarding-manual_proportions-auto = Đo kích thước cơ thể tự động
-onboarding-manual_proportions-ratio = Điều chỉnh theo nhóm tỷ lệ
 
 ## Tracker automatic proportions setup
 
@@ -953,20 +927,11 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     Headset của bạn đang báo cáo dữ liệu vị trí cho máy chủ SlimeVR (điều này thường có nghĩa là SteamVR đang chạy và kết nối với SlimeVR bằng driver SteamVR của SlimeVR).
     Tracking của bạn đang hoạt động và thể hiện chính xác các chuyển động của bạn (ví dụ: bạn đã thực hiện thiết đặt lại hoàn toàn và chúng di chuyển đúng hướng khi đá, cúi xuống, ngồi, v.v.).
 onboarding-automatic_proportions-requirements-next = Tôi đã đọc các yêu cầu
-onboarding-automatic_proportions-check_height-title = Kiểm tra chiều cao của bạn
-onboarding-automatic_proportions-check_height-description = Chúng tôi sử dụng chiều cao của bạn làm cơ sở cho các phép đo của chúng tôi bằng cách sử dụng chiều cao của headset (HMD) làm chiều cao ước tính thực tế của bạn, nhưng tốt hơn hết bạn nên tự kiểm tra xem chúng có đúng không!
-# All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = Vui lòng nhấn nút trong khi đứng <u>thẳng</u> để tính chiều cao của bạn. Bạn có 3 giây sau khi nhấn nút!
 onboarding-automatic_proportions-check_height-guardian_tip =
     Nếu bạn đang sử dụng Kính VR Standalone, hãy đảm bảo có guardian /
     Ranh giới được bật để chiều cao của bạn là chính xác!
-onboarding-automatic_proportions-check_height-fetch_height = Tôi đang đứng!
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = Không rõ
-# Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = Chiều cao của HMD là
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = vậy chiều cao thật của bạn là
 onboarding-automatic_proportions-check_height-next_step = Những chỉ số này là đúng
 onboarding-automatic_proportions-start_recording-title = Chuẩn bị đo
 onboarding-automatic_proportions-start_recording-description = Phần mềm sẽ đo một số chuyển động, cử chỉ cụ thể, hãy chuẩn bị cho việc di chuyển theo yêu cầu trong phần tiếp theo
@@ -997,11 +962,17 @@ onboarding-automatic_proportions-verify_results-redo = Thử lại
 onboarding-automatic_proportions-verify_results-confirm = Kết quả tương đối chính xác
 onboarding-automatic_proportions-done-title = Đã lưu chỉ số đo
 onboarding-automatic_proportions-done-description = Quá trình đo đã hoàn tất
-onboarding-automatic_proportions-error_modal =
-    <b>Lưu ý:</b> Một lỗi đã được tìm thấy trong khi ước tính tỷ lệ cơ thể!
-    Vui lòng <docs>kiểm tra hướng dẫn</docs> hoặc tham gia <discord>Discord</discord> của chúng tôi để được trợ giúp ^_^
 onboarding-automatic_proportions-error_modal-confirm = Đã hiểu!
 
+## Tracker scaled proportions setup
+
+
+## Tracker scaled proportions reset
+
+
+## Stay Aligned setup
+
+
 ## Home
 
 home-no_trackers = Chưa có thiết bị nào được phát hiện hoặc điều ra
@@ -1026,6 +997,21 @@ status_system-StatusSteamVRDisconnected =
 status_system-StatusTrackerError = Tracker { $trackerName } có lỗi.
 status_system-StatusUnassignedHMD = Kính thực tế ảo VR này nên được giao là bộ theo dõi đầu.
 
+## Firmware tool globals
+
+
+## Firmware tool Steps
+
+
+## firmware tool build status
+
+
+## Firmware update status
+
+
+## Dedicated Firmware Update Page
+
+
 ## Tray Menu
 
 tray_menu-show = Xem
@@ -1053,3 +1039,6 @@ unknown_device-modal-description =
     Bạn có muốn kết nối nó với SlimeVR không?
 unknown_device-modal-confirm = Chắc!
 unknown_device-modal-forget = Bỏ qua
+
+## Error collection consent modal
+

gui/public/i18n/zh-Hans/translation.ftl

@@ -9,6 +9,11 @@
 
 websocket-connecting = 正在连接到服务器
 websocket-connection_lost = 与服务器的连接丢失，正在尝试重新连接...
+websocket-connection_lost-desc = 看起来 SlimeVR 服务器崩溃了。检查日志并重新启动程序
+websocket-timedout = 无法连接到服务器
+websocket-timedout-desc = 看起来 SlimeVR 服务器崩溃或超时了。检查日志并重新启动程序
+websocket-error-close = 退出 SlimeVR
+websocket-error-logs = 打开日志文件夹
 
 ## Update notification
 
@@ -49,45 +54,187 @@ body_part-LEFT_HAND = 左手
 body_part-LEFT_UPPER_LEG = 左大腿
 body_part-LEFT_LOWER_LEG = 左小腿
 body_part-LEFT_FOOT = 左脚
+body_part-LEFT_THUMB_METACARPAL = 左拇指掌骨
+body_part-LEFT_THUMB_PROXIMAL = 左拇指近端
+body_part-LEFT_THUMB_DISTAL = 左拇指远端
+body_part-LEFT_INDEX_PROXIMAL = 左食指近端
+body_part-LEFT_INDEX_INTERMEDIATE = 左食指中端
+body_part-LEFT_INDEX_DISTAL = 左食指远端
+body_part-LEFT_MIDDLE_PROXIMAL = 左中指近端
+body_part-LEFT_MIDDLE_INTERMEDIATE = 左中指中端
+body_part-LEFT_MIDDLE_DISTAL = 左中指远端
+body_part-LEFT_RING_PROXIMAL = 左环指近端
+body_part-LEFT_RING_INTERMEDIATE = 左环指中端
+body_part-LEFT_RING_DISTAL = 左环指远端
+body_part-LEFT_LITTLE_PROXIMAL = 左小指近端
+body_part-LEFT_LITTLE_INTERMEDIATE = 左小指中端
+body_part-LEFT_LITTLE_DISTAL = 左小指远端
+body_part-RIGHT_THUMB_METACARPAL = 右拇指掌骨
+body_part-RIGHT_THUMB_PROXIMAL = 右拇指近端
+body_part-RIGHT_THUMB_DISTAL = 右拇指远端
+body_part-RIGHT_INDEX_PROXIMAL = 右食指近端
+body_part-RIGHT_INDEX_INTERMEDIATE = 右食指中端
+body_part-RIGHT_INDEX_DISTAL = 右食指远端
+body_part-RIGHT_MIDDLE_PROXIMAL = 右中指近端
+body_part-RIGHT_MIDDLE_INTERMEDIATE = 右中指中端
+body_part-RIGHT_MIDDLE_DISTAL = 右中指远端
+body_part-RIGHT_RING_PROXIMAL = 右环指近端
+body_part-RIGHT_RING_INTERMEDIATE = 右环指中端
+body_part-RIGHT_RING_DISTAL = 右环指远端
+body_part-RIGHT_LITTLE_PROXIMAL = 右小指近端
+body_part-RIGHT_LITTLE_INTERMEDIATE = 右小指中端
+body_part-RIGHT_LITTLE_DISTAL = 右小指远端
+
+## BoardType
+
+board_type-UNKNOWN = 未知
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = 自定义开发板
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joycons
+board_type-MOCOPI = 索尼 Mocopi
+board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR开发版IMU手套
 
 ## Proportions
 
 skeleton_bone-NONE = 无
 skeleton_bone-HEAD = 头部偏移
+skeleton_bone-HEAD-desc =
+    从头戴显示器到头部中心的距离。
+    调节时，左右摇头并修改此参数，使头部移动时其他追踪器位置保持不变。
 skeleton_bone-NECK = 颈部长度
+skeleton_bone-NECK-desc =
+    从头部中心到脖子根部的距离。
+    调节时，上下点头或左右倾斜头部，并修改此参数，
+    使头部移动时其他追踪器位置保持不变。
 skeleton_bone-torso_group = 躯干长度
+skeleton_bone-torso_group-desc =
+    从脖子根部到臀部的距离。
+    调节时，直立并修改此参数，使虚拟臀部与真实的臀部对齐。
 skeleton_bone-UPPER_CHEST = 上胸长度
+skeleton_bone-UPPER_CHEST-desc =
+    从脖子根部到胸部中部的距离。
+    调节时，先完成躯干长度的设置，再修改此参数，
+    并进行包括坐下、弯腰、平躺等动作，使虚拟脊椎与真实的脊椎对齐。
 skeleton_bone-CHEST_OFFSET = 胸部偏移
+skeleton_bone-CHEST_OFFSET-desc = 向上或向下移动臀部胸部追踪器，用于在某些游戏或应用中移动胸部追踪器位置。
 skeleton_bone-CHEST = 胸部长度
+skeleton_bone-CHEST-desc =
+    从胸部中部到脊椎中部的距离。
+    调节时，先完成躯干长度的设置，再修改此参数，
+    并进行包括坐下、弯腰、平躺等动作，使虚拟脊椎与真实的脊椎对齐。
 skeleton_bone-WAIST = 腰部长度
+skeleton_bone-WAIST-desc =
+    从脊椎中部到肚脐的距离。
+    调节时，先完成躯干长度的设置，再修改此参数，
+    并进行包括坐下、弯腰、平躺等动作，使虚拟脊椎与真实的脊椎对齐。
 skeleton_bone-HIP = 髋部长度
+skeleton_bone-HIP-desc =
+    从肚脐到臀部的距离。
+    调节时，先完成躯干长度的设置，再修改此参数，
+    并进行包括坐下、弯腰、平躺等动作，使虚拟脊椎与真实的脊椎对齐。
 skeleton_bone-HIP_OFFSET = 髋部偏移
+skeleton_bone-HIP_OFFSET-desc = 向上或向下移动臀部虚拟追踪器，用于在某些游戏或应用中将虚拟臀部追踪器移动至腰部。
 skeleton_bone-HIPS_WIDTH = 髋部宽度
+skeleton_bone-HIPS_WIDTH-desc =
+    两腿根部之间的距离。
+    调节时，先在站直时进行一次完全重置，再修改此参数，
+    使虚拟腿部与真实的腿部位置在水平方向上对齐。
 skeleton_bone-leg_group = 全腿长度
+skeleton_bone-leg_group-desc =
+    从臀部到脚踝的距离。
+    调节时，先完成躯干长度的设置，再修改此参数，
+    使虚拟脚部与真实的脚部位置对齐。
 skeleton_bone-UPPER_LEG = 大腿长度
+skeleton_bone-UPPER_LEG-desc =
+    从臀部到膝盖的距离。
+    调节时，先完成腿部长度的设置，再修改此参数，
+    使虚拟膝盖与真实的膝盖位置对齐。
 skeleton_bone-LOWER_LEG = 小腿长度
+skeleton_bone-LOWER_LEG-desc =
+    从膝盖到脚踝的距离。
+    调节时，先完成腿部长度的设置，再修改此参数，
+    使虚拟膝盖与真实的膝盖位置对齐。
 skeleton_bone-FOOT_LENGTH = 脚部长度
+skeleton_bone-FOOT_LENGTH-desc =
+    从脚踝到脚趾的距离。
+    调节时，踮起脚尖并修改此参数，
+    使虚拟脚部位置与真实脚部位置对齐。
 skeleton_bone-FOOT_SHIFT = 脚部偏移
+skeleton_bone-FOOT_SHIFT-desc =
+    从膝盖到脚踝的水平距离。可用于修正直立式小腿向后弯曲的问题。
+    调节时，先将脚部长度设置为0，进行完全复位，
+    再修改此参数，使虚拟脚部对齐脚踝中心。
 skeleton_bone-SKELETON_OFFSET = 骨架偏移
+skeleton_bone-SKELETON_OFFSET-desc = 向前或向后移动所有虚拟追踪器，用于在某些游戏或应用中调节追踪器位置。
 skeleton_bone-SHOULDERS_DISTANCE = 肩膀距离
+skeleton_bone-SHOULDERS_DISTANCE-desc =
+    从脖子中心到肩膀的垂直距离。
+    调节时，先将上臂长度设置为0，再修改此参数，
+    使虚拟肘部追踪器与真实的肩膀位置在垂直方向上对齐。
 skeleton_bone-SHOULDERS_WIDTH = 肩膀宽度
+skeleton_bone-SHOULDERS_WIDTH-desc =
+    从脖子中心到肩膀的水平距离。
+    调节时，先将上臂长度设置为0，再修改此参数，
+    使虚拟肘部追踪器与真实的肩膀位置在水平方向上对齐。
 skeleton_bone-arm_group = 手臂长度
+skeleton_bone-arm_group-desc =
+    从肩膀到手腕的距离。
+    调整时，先完成肩膀距离的配置，将手部距离Y设置为0，
+    再修改此参数，使手部追踪器与手腕对齐。
 skeleton_bone-UPPER_ARM = 上臂长度
+skeleton_bone-UPPER_ARM-desc =
+    从肩膀到手肘的距离。
+    调整时，先完成手臂长度的设置，再修改此参数，
+    使肘部追踪器与真实的手肘位置对齐。
 skeleton_bone-LOWER_ARM = 前臂距离
+skeleton_bone-LOWER_ARM-desc =
+    从手肘到手腕的距离。
+    调整时，先完成手臂长度的设置，再修改此参数，
+    使肘部追踪器与真实的手肘位置对齐。
 skeleton_bone-HAND_Y = 手部距离Y
+skeleton_bone-HAND_Y-desc =
+    从手腕到手中心的c垂直距离。
+    在动捕模式下，先完成手臂长度的设置，
+    再修改此参数，使手部追踪器与手的中心在垂直方向上对齐。
+    在使用控制器进行肘部追踪的情况下，将手臂长度设置为0，
+    再修改此参数，使肘部追踪器与手的中心在垂直方向上对齐。
 skeleton_bone-HAND_Z = 手部距离Z
+skeleton_bone-HAND_Z-desc =
+    从手腕到手中心的水平距离。
+    在动捕模式下，将此数值设置为0。
+    在使用控制器进行肘部追踪的情况下，将手臂长度设置为0，
+    并修改此参数，使肘部追踪器与手腕在水平方向对齐。
 skeleton_bone-ELBOW_OFFSET = 肘部偏移
+skeleton_bone-ELBOW_OFFSET-desc = 向上或向下移动肘部虚拟追踪器，避免VRChat将肘部追踪器绑定到胸部。
 
 ## Tracker reset buttons
 
 reset-reset_all = 重置身体比例
-reset-reset_all_warning =
-    <b>警告：</b> 这会将您的身体比例重置为仅基于身高的默认比例。
+reset-reset_all_warning-v2 =
+    <b>警告：</b> 您的骨骼比例将重置为您配置的身高下的默认值。
     您确定要执行此操作吗？
 reset-reset_all_warning-reset = 重置身体比例
 reset-reset_all_warning-cancel = 取消
+reset-reset_all_warning_default-v2 =
+    <b>警告：</b> 您的身高尚未配置，您的骨骼比例将重置为默认身高下的默认值。
+    您确定要执行此操作吗？
 reset-full = 完整重置
 reset-mounting = 重置佩戴
+reset-mounting-feet = 重置脚部佩戴
+reset-mounting-fingers = 重置手指佩戴
 reset-yaw = 重置航向轴
 
 ## Serial detection stuff
@@ -113,6 +260,7 @@ navbar-settings = 设置
 
 bvh-start_recording = 录制 BVH 文件
 bvh-recording = 录制中...
+bvh-save_title = 保存BVH记录
 
 ## Tracking pause
 
@@ -153,6 +301,7 @@ widget-imu_visualizer-rotation_raw = 原始旋转
 widget-imu_visualizer-rotation_preview = 预览
 widget-imu_visualizer-acceleration = 加速度
 widget-imu_visualizer-position = 位置
+widget-imu_visualizer-stay_aligned = 持续校准
 
 ## Widget: Skeleton Visualizer
 
@@ -180,6 +329,7 @@ tracker-table-column-temperature = 温度 °C
 tracker-table-column-linear-acceleration = 加速度 X/Y/Z
 tracker-table-column-rotation = 旋转 X/Y/Z
 tracker-table-column-position = 位置 X/Y/Z
+tracker-table-column-stay_aligned = 持续校准
 tracker-table-column-url = 地址
 
 ## Tracker rotation
@@ -204,9 +354,17 @@ tracker-infos-url = 追踪器地址
 tracker-infos-version = 固件版本
 tracker-infos-hardware_rev = 硬件版本
 tracker-infos-hardware_identifier = 硬件ID
+tracker-infos-data_support = 数据类型
 tracker-infos-imu = IMU型号
 tracker-infos-board_type = 主板型号
 tracker-infos-network_version = 协议版本
+tracker-infos-magnetometer = 磁力计
+tracker-infos-magnetometer-status-v1 =
+    { $status ->
+        [DISABLED] 已禁用
+        [ENABLED] 已启用
+       *[NOT_SUPPORTED] 不支持
+    }
 
 ## Tracker settings
 
@@ -221,14 +379,29 @@ tracker-settings-mounting_section-edit = 编辑佩戴
 tracker-settings-drift_compensation_section = 允许漂移补偿
 tracker-settings-drift_compensation_section-description = 是否在此追踪器上应用漂移补偿？
 tracker-settings-drift_compensation_section-edit = 允许漂移补偿
+tracker-settings-use_mag = 允许使用这个追踪器的磁力计
+# Multiline!
+tracker-settings-use_mag-description =
+    如果「在追踪器上启用磁力计」已启用，是否要在这个追踪器上启用它来减轻飘移？<b>切换本选项时请勿关闭追踪器的电源！</b>
+    
+    请先启用「在追踪器上启用磁力计」功能，<magSetting>点选此处以移动至该设定</magSetting>。
+tracker-settings-use_mag-label = 允许使用这个追踪器的磁力计
 # The .<name> means it's an attribute and it's related to the top key.
 # In this case that is the settings for the assignment section.
 tracker-settings-name_section = 追踪器名称
 tracker-settings-name_section-description = 给它起一个可爱的名字吧=w=~
 tracker-settings-name_section-placeholder = CC 封印着漆黑之力的漆黑左臂
+tracker-settings-name_section-label = 追踪器名称
 tracker-settings-forget = 忘记追踪器
 tracker-settings-forget-description = 从 SlimeVR 服务器中移除该追踪器，并在服务器重启前不再连接这一追踪器。追踪器的配置信息不会被清除。
 tracker-settings-forget-label = 忘记追踪器
+tracker-settings-update-unavailable = 无法升级（DIY）
+tracker-settings-update-low-battery = 无法更新。当前电池电量低于 50%
+tracker-settings-update-up_to_date = 已是最新
+tracker-settings-update-blocked = 更新不可用。没有其他可用版本
+tracker-settings-update-available = { $versionName } 现在可用
+tracker-settings-update = 立即更新
+tracker-settings-update-title = 固件版本
 
 ## Tracker part card info
 
@@ -295,6 +468,7 @@ mounting_selection_menu-close = 关闭
 settings-sidebar-title = 设置
 settings-sidebar-general = 通用设置
 settings-sidebar-tracker_mechanics = 追踪器设置
+settings-sidebar-stay_aligned = 持续校准
 settings-sidebar-fk_settings = FK 设置
 settings-sidebar-gesture_control = 手势控制
 settings-sidebar-interface = 交互界面
@@ -304,6 +478,9 @@ settings-sidebar-utils = 工具
 settings-sidebar-serial = 串口控制台
 settings-sidebar-appearance = 外观
 settings-sidebar-notifications = 通知
+settings-sidebar-behavior = 行为
+settings-sidebar-firmware-tool = DIY固件工具
+settings-sidebar-vrc_warnings = VRChat设置警告
 settings-sidebar-advanced = 高级选项
 
 ## SteamVR settings
@@ -380,6 +557,30 @@ settings-general-tracker_mechanics-save_mounting_reset-description =
     在SlimeVR服务器关闭时保留追踪器自动佩戴重置结果。适用于一体式动捕服等
     追踪器佩戴位置保持不变的场景。<b>不建议普通用户使用！</b>
 settings-general-tracker_mechanics-save_mounting_reset-enabled-label = 保存佩戴重置
+settings-general-tracker_mechanics-use_mag_on_all_trackers = 在支持的 IMU 追踪器上启用磁力计
+settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
+    在所有有固件支持的追踪器上启用磁力计，在磁场稳定的环境中可以减轻飘移。
+    可以在个别追踪器上禁用本功能。<b>切换此选项时请勿关闭任何一个追踪器的电源！</b>
+settings-general-tracker_mechanics-use_mag_on_all_trackers-label = 在追踪器上启用磁力计
+settings-stay_aligned = 持续校准
+settings-stay_aligned-description = 持续校准会逐渐将追踪器对齐到设置的放松姿势，减少追踪器漂移的影响
+settings-stay_aligned-setup-label = 配置持续校准
+settings-stay_aligned-setup-description = 完成“配置持续校准”后才可启动持续校准。
+settings-stay_aligned-warnings-drift_compensation = ⚠ 使用持续校准时请关闭漂移补偿功能，避免发生干扰
+settings-stay_aligned-enabled-label = 调整追踪器
+settings-stay_aligned-hide_yaw_correction-label = 隐藏调整效果（用于与持续校准关闭时进行比较）
+settings-stay_aligned-general-label = 通用设置
+settings-stay_aligned-relaxed_poses-label = 放松姿势
+settings-stay_aligned-relaxed_poses-description = 持续校准使用您设定的放松姿势保持追踪器校准。使用“设置持续校准”来更新放松姿势。
+settings-stay_aligned-relaxed_poses-standing = 站立放松姿势
+settings-stay_aligned-relaxed_poses-sitting = 椅子上放松姿势
+settings-stay_aligned-relaxed_poses-flat = 地面/平躺放松姿势
+settings-stay_aligned-relaxed_poses-save_pose = 保存姿势
+settings-stay_aligned-relaxed_poses-reset_pose = 重置姿势
+settings-stay_aligned-relaxed_poses-close = 关闭
+settings-stay_aligned-debug-label = 调试
+settings-stay_aligned-debug-description = 在报告持续校准相关问题时，请包含您的以下设置信息
+settings-stay_aligned-debug-copy-label = 复制设置信息到剪贴板
 
 ## FK/Tracking settings
 
@@ -403,6 +604,11 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = 脚掌着地会
 settings-general-fk_settings-leg_fk = 腿部追踪
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = 开启脚部佩戴重置。（佩戴重置时需要踮起脚尖）
 settings-general-fk_settings-leg_fk-reset_mounting_feet = 脚部佩戴重置
+settings-general-fk_settings-enforce_joint_constraints = 骨骼限制
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = 强制约束
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = 避免关节旋转超过人体骨骼角度限制
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = 使用约束修正
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = 当关节旋转超过人体骨骼角度限制时进行修正
 settings-general-fk_settings-arm_fk = 手臂追踪
 settings-general-fk_settings-arm_fk-description = 即使有手臂位置数据可用，也强制使用头显的数据追踪手臂。
 settings-general-fk_settings-arm_fk-force_arms = 强制使用头显数据追踪手臂
@@ -434,9 +640,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = 平
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = 平均膝盖与小腿间航向轴和横滚轴的数值
 settings-general-fk_settings-self_localization-title = 动作捕捉模式
 settings-general-fk_settings-self_localization-description = 动作捕捉模式允许在没有头戴设备或其他追踪器的情况下粗略地跟踪骨架姿态。请注意，本功能需要脚部和头部追踪器，且现阶段依然是实验性的。
-settings-general-fk_settings-vive_emulation-title = Vive 模拟
-settings-general-fk_settings-vive_emulation-description = 模拟Vive追踪器的腰部丢追问题。（ 注：这是一个玩笑功能，会劣化追踪质量。）
-settings-general-fk_settings-vive_emulation-label = 开启 Vive 模拟
 
 ## Gesture control settings (tracker tapping)
 
@@ -503,6 +706,13 @@ settings-general-interface-feedback_sound-volume = 提示音音量
 settings-general-interface-connected_trackers_warning = 已连接追踪器警告
 settings-general-interface-connected_trackers_warning-description = 启用本选项后，每次当退出 SlimeVR 时仍有追踪器连接着会显示通知，提醒你在使用完毕时关闭追踪器电源来节省电池电量。
 settings-general-interface-connected_trackers_warning-label = 退出时，有追踪器连接中则显示警告
+
+## Behavior settings
+
+settings-interface-behavior = 行为
+settings-general-interface-dev_mode = 开发者模式
+settings-general-interface-dev_mode-description = 如果你需要深入的资料或对连接的追踪器进行进阶调整，开启此模式将会非常有用。
+settings-general-interface-dev_mode-label = 开发者模式
 settings-general-interface-use_tray = 最小化至任务栏
 settings-general-interface-use_tray-description = 关闭 SlimeVR 窗口时，SlimeVR 服务器将会隐藏至任务栏图标而不会直接退出，可以继续使用。
 settings-general-interface-use_tray-label = 最小化至任务栏
@@ -514,6 +724,17 @@ settings-general-interface-discord_presence-message =
         [0] { "" }
        *[other] 正在使用 { $amount } 个追踪器
     }
+settings-interface-behavior-error_tracking = 通过 Sentry.io 收集错误信息
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>您是否同意收集匿名的错误信息？</h1>
+    
+    <b>我们不会收集您的个人信息</b> ，例如您的 IP 地址或 WiFi 信息。SlimeVR 重视您的隐私！
+    
+    为了提供最佳用户体验，我们会收集匿名错误报告、性能指标和操作系统信息。这有助于我们检测 SlimeVR 的错误和问题。这些指标将通过 Sentry.io 收集。
+settings-interface-behavior-error_tracking-label = 向开发人员发送错误信息
+settings-interface-behavior-bvh_directory = BVH记录保存目录
+settings-interface-behavior-bvh_directory-description = 选择保存BVH记录文件的目录
+settings-interface-behavior-bvh_directory-label = BVH记录保存目录
 
 ## Serial settings
 
@@ -576,6 +797,13 @@ settings-osc-vrchat-description-v1 =
 settings-osc-vrchat-enable = 启用
 settings-osc-vrchat-enable-description = 切换数据的发送和接收
 settings-osc-vrchat-enable-label = 启用
+settings-osc-vrchat-oscqueryEnabled = 启用 OSCQuery
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery 会自动检测正在运行的 VRChat 并向其发送数据。
+    它还可以向 VRChat 通告自身，以便接收头戴显示器和控制器数据。
+    要允许从 VRChat 接收头戴显示器和控制器数据，请进入主菜单的设置
+    并启用“允许发送头部和手腕VR追踪OSC数据”。
+settings-osc-vrchat-oscqueryEnabled-label = 启用 OSCQuery
 settings-osc-vrchat-network = 网络端口
 settings-osc-vrchat-network-description-v1 = 设置传输OSC数据的端口。用于VRChat时无需修改。
 settings-osc-vrchat-network-port_in =
@@ -618,12 +846,7 @@ settings-osc-vmc-network-address-description = 设置用来发送 VMC 数据的
 settings-osc-vmc-network-address-placeholder = IPV4 地址
 settings-osc-vmc-vrm = VRM 模型
 settings-osc-vmc-vrm-description = 加载 VRM 模型以允许头部锚定，并增进与其他程序的兼容
-settings-osc-vmc-vrm-model_unloaded = 未加载模型
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] 已加载模型：{ $name }
-       *[other] 已加载未命名的模型
-    }
+settings-osc-vmc-vrm-untitled_model = 无标题模型
 settings-osc-vmc-vrm-file_select = 拖曳文件或 <u>浏览文件</u> 以加载模型
 settings-osc-vmc-anchor_hip = 髋部锚定
 settings-osc-vmc-anchor_hip-description = 将追踪锚定在髋部，有利于坐姿进行虚拟直播。若本选项无法切换，请加载 VRM 模型。
@@ -658,9 +881,12 @@ settings-utils-advanced-reset_warning =
     }
 settings-utils-advanced-reset_warning-reset = 重置设置
 settings-utils-advanced-reset_warning-cancel = 取消
-settings-utils-advanced-open_data = 数据文件夹
-settings-utils-advanced-open_data-description = 在文件管理器中打开SlimeVR的数据文件夹，查看配置文件与日志文件。
+settings-utils-advanced-open_data-v1 = 配置文件夹
+settings-utils-advanced-open_data-description-v1 = 在文件管理器中打开SlimeVR的配置文件夹，查看配置文件。
 settings-utils-advanced-open_data-label = 打开文件夹
+settings-utils-advanced-open_logs = 日志文件夹
+settings-utils-advanced-open_logs-description = 在文件管理器中打开SlimeVR的日志文件夹，查看SlimeVR的日志文件。
+settings-utils-advanced-open_logs-label = 打开文件夹
 
 ## Setup/onboarding menu
 
@@ -687,6 +913,7 @@ onboarding-wifi_creds-submit = 提交！
 onboarding-wifi_creds-ssid =
     .label = SSID
     .placeholder = 输入 SSID
+onboarding-wifi_creds-ssid-required = Wi-Fi 名称为必填项
 onboarding-wifi_creds-password =
     .label = 密码
     .placeholder = 输入密码
@@ -744,12 +971,24 @@ onboarding-connect_tracker-issue-serial = QAQ 我在连接时遇到问题！
 onboarding-connect_tracker-usb = USB 追踪器
 onboarding-connect_tracker-connection_status-none = 正在寻找追踪器
 onboarding-connect_tracker-connection_status-serial_init = 正在连接到串口设备
+onboarding-connect_tracker-connection_status-obtaining_mac_address = 获取追踪器的mac地址
 onboarding-connect_tracker-connection_status-provisioning = 正在发送 Wi-Fi 凭据
 onboarding-connect_tracker-connection_status-connecting = 正在发送 Wi-Fi 凭据
 onboarding-connect_tracker-connection_status-looking_for_server = 正在寻找服务器
 onboarding-connect_tracker-connection_status-connection_error = 无法连接到 Wi-Fi
 onboarding-connect_tracker-connection_status-could_not_find_server = 未找到到服务器
 onboarding-connect_tracker-connection_status-done = 已连接到服务器
+onboarding-connect_tracker-connection_status-no_serial_log = 无法从跟踪器获取日志
+onboarding-connect_tracker-connection_status-no_serial_device_found = 无法通过USB找到追踪器
+onboarding-connect_serial-error-modal-no_serial_log = 追踪器开关是否打开？
+onboarding-connect_serial-error-modal-no_serial_log-desc = 请确保追踪器已经开启并连接到电脑
+onboarding-connect_serial-error-modal-no_serial_device_found = 未检测到追踪器
+onboarding-connect_serial-error-modal-no_serial_device_found-desc =
+    请使用附带的USB线将追踪器连接到电脑并打开追踪器开关。
+    若仍无法工作：
+     - 尝试其他的USB线
+     - 尝试其他的USB接口
+     - 尝试重新安装SlimeVR服务端并在安装时勾选“USB驱动”
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -766,7 +1005,7 @@ onboarding-connect_tracker-next = 所有的追踪器都连接好了
 
 onboarding-calibration_tutorial = IMU校准教程
 onboarding-calibration_tutorial-subtitle = 这将有助于减少追踪器漂移！
-onboarding-calibration_tutorial-description = 每次开启追踪器时，它们都需要在平坦的表面上放置片刻以进行自校准。你也可以通过点击“{ onboarding-calibration_tutorial-calibrate }”按钮来手动校准， <b>校准过程中不要移动追踪器！</b>
+onboarding-calibration_tutorial-description-v1 = 打开追踪器后，将它们放在稳定的平面上一段时间，以便进行校准。追踪器开机后可随时进行校准 - 本页仅是一个校准教程。首先，点击 “{ onboarding-calibration_tutorial-calibrate }” 按钮，然后 <b>不要移动您的追踪器！</b>
 onboarding-calibration_tutorial-calibrate = 我已经把追踪器放在桌子上了
 onboarding-calibration_tutorial-status-waiting = 等待你的操作
 onboarding-calibration_tutorial-status-calibrating = 校准中
@@ -924,44 +1163,27 @@ onboarding-automatic_mounting-mounting_reset-title = 佩戴重置
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. 双腿弯曲以滑雪的姿势蹲下，上身向前倾斜，手臂弯曲。
 onboarding-automatic_mounting-mounting_reset-step-1 = 按下佩戴重置按钮并等待 3 秒钟，然后追踪器的佩戴方向将被重置。
 onboarding-automatic_mounting-preparation-title = 准备
-onboarding-automatic_mounting-preparation-step-0 = 1. 身体直立，双臂放在身体两侧。
-onboarding-automatic_mounting-preparation-step-1 = 按下“复位”按钮，等待 3 秒钟，追踪器将复位。
+onboarding-automatic_mounting-preparation-v2-step-0 = 1. 按下“完全重置”按钮。
+onboarding-automatic_mounting-preparation-v2-step-1 = 2. 站直并向前看，双臂放在身体两侧。
+onboarding-automatic_mounting-preparation-v2-step-2 = 3. 保持姿势，直到 3 秒计时结束。
 onboarding-automatic_mounting-put_trackers_on-title = 穿戴好追踪器
 onboarding-automatic_mounting-put_trackers_on-description = 为了校准佩戴方向，我们将使用你刚才分配的追踪器。戴上你所有的追踪器，你可以在右边的图中看到哪个追踪器对应哪个。
 onboarding-automatic_mounting-put_trackers_on-next = 所有的追踪器都已开启！
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = 使用哪种方法校准身体比例？
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    身体比例记录了你身体各部分的尺寸。它们被用来计算虚拟追踪器的位置。
-    如果保存的身体比例和实际身体尺寸不匹配，追踪精度将会下降，并且会出现脚在地面滑动，或是身体和虚拟形象动作不一致的情况。
-    <b>身体比例设置只要进行一次！</b> 除非身体比例存在错误或是身体尺寸发生了改变，否则不需要重复进行身体比例设置。
-onboarding-choose_proportions-auto_proportions = 自动调整身体比例
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = 推荐
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    这将录制你的运动样本并通过算法来推测你的身体比例。
-    
-    <b>需要戴上头戴设备，并确保设备已连接到 SlimeVR！</b>
-onboarding-choose_proportions-manual_proportions = 手动调整身体比例
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = 用于精细调整
-onboarding-choose_proportions-manual_proportions-description = 这将需要你手动修改以调整你的身体比例
-onboarding-choose_proportions-export = 导出身体比例
-onboarding-choose_proportions-import = 导入身体比例
-onboarding-choose_proportions-import-success = 导入成功
-onboarding-choose_proportions-import-failed = 导入失败
-onboarding-choose_proportions-file_type = 身体比例文件
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = 返回重置教程
 onboarding-manual_proportions-title = 手动调整身体比例
-onboarding-manual_proportions-precision = 精确调整
-onboarding-manual_proportions-auto = 自动校准
-onboarding-manual_proportions-ratio = 按比例分组调整
+onboarding-manual_proportions-fine_tuning_button = 自动微调身体比例
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = 请连接 VR头戴显示器 以使用自动微调
+onboarding-manual_proportions-export = 导出身体比例
+onboarding-manual_proportions-import = 导入身体比例
+onboarding-manual_proportions-file_type = 身体比例文件
+onboarding-manual_proportions-normal_increment = 正常调整
+onboarding-manual_proportions-precise_increment = 精细调整
+onboarding-manual_proportions-grouped_proportions = 分组身体比例
+onboarding-manual_proportions-all_proportions = 所有身体比例
+onboarding-manual_proportions-estimated_height = 估测用户身高
 
 ## Tracker automatic proportions setup
 
@@ -982,21 +1204,33 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     你的头戴设备正在向 SlimeVR 服务器回报位置信息（通常需要 SteamVR 正在运行且通过 SlimeVR 的 SteamVR 驱动连接到 SlimeVR）。
     你的追踪器正常工作并能反应实际运动（进行过完整重置和佩戴重置，踢腿、弯腰、坐下等动作时虚拟骨骼向正确的方向弯曲）。
 onboarding-automatic_proportions-requirements-next = 我已阅读
-onboarding-automatic_proportions-check_height-title = 检查你的身高
-onboarding-automatic_proportions-check_height-description = 我们会使用头戴设备回报的高度来推算您的实际身高，但我们仍建议您检查一下数值是否正确。
+onboarding-automatic_proportions-check_height-title-v3 = 测量你的头戴显示器的高度
+onboarding-automatic_proportions-check_height-description-v2 = 您的头戴显示器 （HMD） 高度应略小于您的身高，因为头戴显示器会测量您眼睛的高度。此测量值将用作计算您身体比例的基准。
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = 请<u>站直</u>后按下按钮以计算身高，按下后您有 3 秒钟来调整姿势。
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = 在 <u>站直</u> 时开始测量以计算您的身高。注意不要将手举过头显，不然可能会影响测量结果！
 onboarding-automatic_proportions-check_height-guardian_tip =
     如果你正在使用一体机进行串流，请确保开启并设置了安全边界，
     以获取正确的高度信息。
-onboarding-automatic_proportions-check_height-fetch_height = 我站好了！
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = 未知
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = 你的头戴设备的高度是
-# Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = 所以你的实际身高是
+onboarding-automatic_proportions-check_height-hmd_height2 = 您的头戴显示器的高度是：
+onboarding-automatic_proportions-check_height-measure-start = 开始测量
+onboarding-automatic_proportions-check_height-measure-stop = 停止测量
+onboarding-automatic_proportions-check_height-measure-reset = 重试测量
 onboarding-automatic_proportions-check_height-next_step = 数值没问题
+onboarding-automatic_proportions-check_floor_height-title = 测量您的地板高度（可选）
+onboarding-automatic_proportions-check_floor_height-description = 在某些情况下，头戴显示器可能无法正确设置地板高度，从而导致头显测得的身高高于实际身高。您可以测量地板的“高度”以校正头显的高度。
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = 开始测量并将控制器放在地板上以测量地板高度。如果您确定您的地板高度是正确的，则可以跳过此步骤。
+# Shows an element below it
+onboarding-automatic_proportions-check_floor_height-floor_height = 您的地板高度为：
+onboarding-automatic_proportions-check_floor_height-full_height = 估计您的身高为：
+onboarding-automatic_proportions-check_floor_height-measure-start = 开始测量
+onboarding-automatic_proportions-check_floor_height-measure-stop = 停止测量
+onboarding-automatic_proportions-check_floor_height-measure-reset = 重试测量
+onboarding-automatic_proportions-check_floor_height-skip_step = 跳过这一步并保存
+onboarding-automatic_proportions-check_floor_height-next_step = 使用测量的地板高度并保存
 onboarding-automatic_proportions-start_recording-title = 准备录制运动
 onboarding-automatic_proportions-start_recording-description = 我们现在要记录一些特定的姿势和动作。这些将在下一个屏幕中提示。当按钮被按下时，准备好开始！
 onboarding-automatic_proportions-start_recording-next = 开始录制
@@ -1022,10 +1256,74 @@ onboarding-automatic_proportions-verify_results-redo = 重新录制
 onboarding-automatic_proportions-verify_results-confirm = 他们是正确的！
 onboarding-automatic_proportions-done-title = 身体数据已测量并保存。
 onboarding-automatic_proportions-done-description = 你的身体比例校准已完成！
-onboarding-automatic_proportions-error_modal =
-    <b>警告：</b> 推算身体比例时发生错误！
-    请 <docs>阅读文档</docs> 或加入我们的 <discord>Discord</discord> 寻求帮助 ^_^
+onboarding-automatic_proportions-error_modal-v2 =
+    <b>警告：</b> 估算身体比例时发生错误！
+    这可能是因为佩戴校准存在问题，请确保追踪器工作正常后再试一次。
+     <docs>请查看文档</docs> 或加入我们的 <discord>Discord</discord> 频道寻求帮助 ^_^
 onboarding-automatic_proportions-error_modal-confirm = 了解！
+onboarding-automatic_proportions-smol_warning =
+    您配置的身高 { $height } 小于可接受的最小身高 { $minHeight }。
+    <b>请重新进行测量并确保测量结果是正确的。</b>
+onboarding-automatic_proportions-smol_warning-cancel = 返回
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = 标准身体比例
+onboarding-scaled_proportions-description = 为了让 SlimeVR 追踪器正常使用，我们需要知道你的骨头的长度。将会使用人体平均骨骼比例，并缩放至您的身高。
+onboarding-scaled_proportions-manual_height-title = 配置您的身高
+onboarding-scaled_proportions-manual_height-description-v2 = 此身高将用作您身体比例的基准。
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR 当前未连接到 SlimeVR，因此不能基于您的头戴显示器进行测量。 <b>请连接后再继续操作或查看文档！</b>
+onboarding-scaled_proportions-manual_height-height-v2 = 您的身高为
+onboarding-scaled_proportions-manual_height-estimated_height = 估计您的头显高度为：
+onboarding-scaled_proportions-manual_height-next_step = 保存并继续
+onboarding-scaled_proportions-manual_height-warning =
+    您当前正在手动设置缩放身体比例！
+    <b>建议只在您不使用头戴显示器时使用此模式</b>
+    
+    为了能够使用自动缩放身体比例，请：
+onboarding-scaled_proportions-manual_height-warning-no_hmd = 连接 VR 头戴显示器
+onboarding-scaled_proportions-manual_height-warning-no_controllers = 确保您的控制器已连接并正确分配到手部
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = 重置您的身体比例
+onboarding-scaled_proportions-reset_proportion-description = 为了根据您的身高设置身体比例，您现在需要重置所有身体比例。这将清除您先前配置的所有身体比例并提供一个基础设置。
+onboarding-scaled_proportions-done-title = 身体比例已设置
+onboarding-scaled_proportions-done-description = 身体比例已根据您的身高进行设置。
+
+## Stay Aligned setup
+
+onboarding-stay_aligned-title = 持续校准
+onboarding-stay_aligned-description = 配置持续校准以保持追踪器校准
+onboarding-stay_aligned-put_trackers_on-title = 穿戴好追踪器
+onboarding-stay_aligned-put_trackers_on-description = 为了保存放松姿势，我们将使用你刚才分配的追踪器。戴上你所有的追踪器，你可以在右边的图中看到哪个追踪器对应哪个。
+onboarding-stay_aligned-put_trackers_on-trackers_warning = 您当前已经连接和分配的追踪器数量少于 5 个！这是持续校准正常运行所需的最小追踪器数量。
+onboarding-stay_aligned-put_trackers_on-next = 所有的追踪器都已开启！
+onboarding-stay_aligned-verify_mounting-title = 检查追踪器佩戴
+onboarding-stay_aligned-verify_mounting-step-0 = 持续校准需要良好的追踪器佩戴固定。否则，持续校准的效果可能会不太理想。
+onboarding-stay_aligned-verify_mounting-step-1 = 1. 请在站立时四处移动。
+onboarding-stay_aligned-verify_mounting-step-2 = 2. 请坐下并移动腿和脚
+onboarding-stay_aligned-verify_mounting-step-3 = 3. 如果追踪器不在正确的位置上，请重新进行这个流程。
+onboarding-stay_aligned-verify_mounting-redo_mounting = 重做佩戴校准
+onboarding-stay_aligned-preparation-title = 准备
+onboarding-stay_aligned-preparation-tip = 站直并向前看，双臂放在身体两侧。
+onboarding-stay_aligned-relaxed_poses-standing-title = 站立放松姿势
+onboarding-stay_aligned-relaxed_poses-standing-step-0 = 1. 以舒适的姿势站立并放松。
+onboarding-stay_aligned-relaxed_poses-standing-step-1-v2 = 2. 按下“保存姿势”按钮。
+onboarding-stay_aligned-relaxed_poses-sitting-title = 椅子上放松姿势
+onboarding-stay_aligned-relaxed_poses-sitting-step-0 = 1. 以舒适的姿势坐下并放松。
+onboarding-stay_aligned-relaxed_poses-sitting-step-1-v2 = 2. 按下“保存姿势”按钮。
+onboarding-stay_aligned-relaxed_poses-flat-title = 地面/平躺放松姿势
+onboarding-stay_aligned-relaxed_poses-flat-step-0 = 1. 以舒适的姿势坐或躺在地面上，保持腿在前方并放松。
+onboarding-stay_aligned-relaxed_poses-flat-step-1-v2 = 2. 按下“保存姿势”按钮。
+onboarding-stay_aligned-relaxed_poses-skip_step = 跳过
+onboarding-stay_aligned-done-title = 持续校准已开启！
+onboarding-stay_aligned-done-description = 持续校准已设定完成！
+onboarding-stay_aligned-done-description-2 = 设置完成！如果要重新校准放松姿势，可以重新进行该过程
+onboarding-stay_aligned-previous_step = 上一步
+onboarding-stay_aligned-next_step = 下一步
+onboarding-stay_aligned-restart = 重新开始
+onboarding-stay_aligned-done = 完成
 
 ## Home
 
@@ -1050,6 +1348,150 @@ status_system-StatusSteamVRDisconnected =
     }
 status_system-StatusTrackerError = { $trackerName } 追踪器发生错误
 status_system-StatusUnassignedHMD = VR头显应被分配为头部追踪器。
+status_system-StatusPublicNetwork = 您当前的网络类型设置为“公开”。 这可能会导致SlimeVR功能出现异常。<PublicFixLink>点击这里查看如何进行设置。</PublicFixLink>
+
+## Firmware tool globals
+
+firmware_tool-next_step = 下一步
+firmware_tool-previous_step = 上一步
+firmware_tool-ok = 看起来不错
+firmware_tool-retry = 重试
+firmware_tool-loading = 加载中...
+
+## Firmware tool Steps
+
+firmware_tool = DIY固件工具
+firmware_tool-description = 允许您配置和烧录 DIY 追踪器固件
+firmware_tool-not_available = 哦不，固件工具目前不可用。稍后再来！
+firmware_tool-not_compatible = 固件工具与此版本的服务端不兼容。请更新您的服务端！
+firmware_tool-board_step = 选择您的开发板
+firmware_tool-board_step-description = 选择下列开发板之一
+firmware_tool-board_pins_step = 检查引脚
+firmware_tool-board_pins_step-description =
+    请验证所选引脚是否正确。
+    如果您遵循了 SlimeVR 文档，则默认值应该是正确的
+firmware_tool-board_pins_step-enable_led = 启用 LED
+firmware_tool-board_pins_step-led_pin =
+    .label = LED 引脚
+    .placeholder = 输入LED引脚的编号
+firmware_tool-board_pins_step-battery_type = 选择电池测量电路类型
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = 使用外接电阻与片内ADC测量（默认）
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = 使用片内低电量告警电路
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = 使用片内低电量告警电路与外接MCP3021测量
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = 使用外接MCP3021测量
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = 电池检测引脚
+    .placeholder = 输入电池检测引脚的编号
+firmware_tool-board_pins_step-battery_resistor =
+    .label = 电池外接串联电阻（欧姆）
+    .placeholder = 输入电池串联电阻的阻值
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = 开发板载对地分压电阻R1（欧姆）
+    .placeholder = 请输入开发板载对地分压电阻 R1 的值。
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = 开发板载对输入分压电阻 R2（欧姆）
+    .placeholder = 请输入开发板载对输入分压电阻 R2 的值。
+firmware_tool-add_imus_step = 添加您的 IMU
+firmware_tool-add_imus_step-description =
+    请添加您的追踪器所配备的 IMU 传感器。  
+    如果您遵循了 SlimeVR 文档，默认值应该是正确的。
+firmware_tool-add_imus_step-imu_type-label = IMU 类型
+firmware_tool-add_imus_step-imu_type-placeholder = 选择 IMU 类型
+firmware_tool-add_imus_step-imu_rotation =
+    .label = 追踪器旋转（度）
+    .placeholder = 追踪器旋转角度
+firmware_tool-add_imus_step-scl_pin =
+    .label = SCL 引脚
+    .placeholder = SCL 引脚编号
+firmware_tool-add_imus_step-sda_pin =
+    .label = SDA 引脚
+    .placeholder = SDA 引脚编号
+firmware_tool-add_imus_step-int_pin =
+    .label = INT 引脚
+    .placeholder = INT 引脚编号
+firmware_tool-add_imus_step-optional_tracker =
+    .label = 此 IMU 为可选扩展
+firmware_tool-add_imus_step-show_less = 显示更少
+firmware_tool-add_imus_step-show_more = 显示更多
+firmware_tool-add_imus_step-add_more = 添加更多 IMU
+firmware_tool-select_firmware_step = 选择固件版本
+firmware_tool-select_firmware_step-description = 请选择您要使用的固件版本
+firmware_tool-select_firmware_step-show-third-party =
+    .label = 显示第三方固件
+firmware_tool-flash_method_step = 固件烧录方式
+firmware_tool-flash_method_step-description = 请选择您要使用的固件烧录方式
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = 使用无线方式。您的追踪器将通过 Wi-Fi 更新固件。仅适用于已设置好的追踪器。
+firmware_tool-flash_method_step-serial =
+    .label = 串口
+    .description = 使用 USB 数据线更新您的追踪器。
+firmware_tool-flashbtn_step = 按下启动/Boot按钮
+firmware_tool-flashbtn_step-description = 在进入下一步之前，您需要做几件事情。
+firmware_tool-flashbtn_step-board_SLIMEVR = 关闭追踪器，拆下外壳（如果有的话），使用 USB 数据线连接到计算机，然后根据您的 SlimeVR 电路板版本执行以下步骤之一：
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = 在短接电路板正面边缘第二个矩形 FLASH 焊盘和单片机模块的金属屏蔽罩的时候，打开追踪器电源。
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = 在短接电路板正面圆形 FLASH 焊盘和单片机模块的金属屏蔽罩的时候，打开追踪器电源。
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = 在按住电路板正面的 FLASH 按钮的时候，打开追踪器的电源。
+firmware_tool-flashbtn_step-board_OTHER =
+    在烧录固件之前，您可能需要将追踪器置于bootloader模式。  
+    通常这意味着在开始固件烧录过程之前，按下板上的引导/boot按钮。  
+    如果固件烧录过程在开始时超时，这通常表示追踪器没有处于bootloader模式。  
+    请参考您的追踪器电路板的固件烧录说明，了解如何进入bootloader模式。
+firmware_tool-flash_method_ota-devices = 检测到的 OTA 设备：
+firmware_tool-flash_method_ota-no_devices = 没有可以使用 OTA 更新的电路板，请确保选择了正确的电路板类型
+firmware_tool-flash_method_serial-wifi = Wi-Fi 凭证：
+firmware_tool-flash_method_serial-devices-label = 检测到的串口设备：
+firmware_tool-flash_method_serial-devices-placeholder = 选择串口设备
+firmware_tool-flash_method_serial-no_devices = 未检测到兼容的串口设备，请确保追踪器已插入
+firmware_tool-build_step = 构建中
+firmware_tool-build_step-description = 固件正在构建中，请稍候
+firmware_tool-flashing_step = 固件烧录中
+firmware_tool-flashing_step-description = 正在向追踪器烧录固件，请按照屏幕上的指示操作
+firmware_tool-flashing_step-warning-v2 = 除非特别指示，在固件传输过程中请勿断开或关闭追踪器，否则可能会导致您的电路板无法使用
+firmware_tool-flashing_step-flash_more = 烧录更多的追踪器
+firmware_tool-flashing_step-exit = 退出
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = 正在创建 build 文件夹
+firmware_tool-build-DOWNLOADING_FIRMWARE = 正在下载固件源文件
+firmware_tool-build-EXTRACTING_FIRMWARE = 正在解压固件
+firmware_tool-build-SETTING_UP_DEFINES = 正在配置固件 define 参数
+firmware_tool-build-BUILDING = 正在构建固件
+firmware_tool-build-SAVING = 正在保存构建结果
+firmware_tool-build-DONE = 构建完成
+firmware_tool-build-ERROR = 无法构建固件
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = 正在下载固件
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = 请关闭您的追踪器，然后再重新打开
+firmware_update-status-AUTHENTICATING = 正在确认追踪器连接
+firmware_update-status-UPLOADING = 正在传输固件
+firmware_update-status-SYNCING_WITH_MCU = 正在与追踪器同步
+firmware_update-status-REBOOTING = 正在重启追踪器
+firmware_update-status-PROVISIONING = 正在设置 Wi-Fi 凭据
+firmware_update-status-DONE = 更新完成！
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = 未找到设备
+firmware_update-status-ERROR_TIMEOUT = 更新过程超时
+firmware_update-status-ERROR_DOWNLOAD_FAILED = 无法下载固件
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = 无法确认追踪器连接
+firmware_update-status-ERROR_UPLOAD_FAILED = 无法传输固件
+firmware_update-status-ERROR_PROVISIONING_FAILED = 无法设置 Wi-Fi 凭据
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = 更新方式不被支持
+firmware_update-status-ERROR_UNKNOWN = 未知错误
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = 固件更新
+firmware_update-devices = 可用设备
+firmware_update-devices-description = 请选择要更新到最新版本 SlimeVR 固件的跟踪器
+firmware_update-no_devices = 请确保您要更新的追踪器已打开并连接到 Wi-Fi！
+firmware_update-changelog-title = 更新至{ $version }
+firmware_update-looking_for_devices = 正在寻找要更新的设备...
+firmware_update-retry = 重试
+firmware_update-update = 更新选定的追踪器
+firmware_update-exit = 退出
 
 ## Tray Menu
 
@@ -1077,3 +1519,53 @@ unknown_device-modal-description =
     要将它连接到 SlimeVR 吗？
 unknown_device-modal-confirm = 是的！
 unknown_device-modal-forget = 忽略它
+# VRChat config warnings
+vrc_config-page-title = VRChat设置警告
+vrc_config-page-desc = 本页会显示当前VRChat设置的状态，并显示哪些设置与SlimeVR存在冲突。为获得最好的体验，建议修复此处显示的所有警告后再进行使用。
+vrc_config-page-help = 找不到设置信息？
+vrc_config-page-help-desc = 请查阅 <a>此处的说明文档</a>
+vrc_config-page-big_menu = 追踪与IK（大菜单）
+vrc_config-page-big_menu-desc = 大菜单中与IK相关的设置
+vrc_config-page-wrist_menu = 追踪与IK（手上菜单）
+vrc_config-page-wrist_menu-desc = 手上菜单（小菜单）中与IK相关的配置
+vrc_config-on = 开
+vrc_config-off = 关
+vrc_config-invalid = 存在错误的VRChat设置！
+vrc_config-show_more = 显示更多
+vrc_config-setting_name = VRChat设置名称
+vrc_config-recommended_value = 推荐值
+vrc_config-current_value = 当前值
+vrc_config-mute = 消除警告
+vrc_config-mute-btn = 消除
+vrc_config-unmute-btn = 取消消除
+vrc_config-legacy_mode = 使用旧版IK解算
+vrc_config-disable_shoulder_tracking = 禁用肩膀追踪
+vrc_config-shoulder_width_compensation = 肩宽补偿
+vrc_config-spine_mode = 全追脊柱模式
+vrc_config-tracker_model = 全追追踪器模型
+vrc_config-avatar_measurement_type = 虚拟形象测量
+vrc_config-calibration_range = 校准范围
+vrc_config-calibration_visuals = 显示全追校准范围
+vrc_config-user_height = 用户真实身高
+vrc_config-spine_mode-UNKNOWN = 未知
+vrc_config-spine_mode-LOCK_BOTH = 同时锁定
+vrc_config-spine_mode-LOCK_HEAD = 锁定头部
+vrc_config-spine_mode-LOCK_HIP = 锁定臀部
+vrc_config-tracker_model-UNKNOWN = 未知
+vrc_config-tracker_model-AXIS = 十字轴
+vrc_config-tracker_model-BOX = 方盒
+vrc_config-tracker_model-SPHERE = 球体
+vrc_config-tracker_model-SYSTEM = 系统模型
+vrc_config-avatar_measurement_type-UNKNOWN = 未知
+vrc_config-avatar_measurement_type-HEIGHT = 身高
+vrc_config-avatar_measurement_type-ARM_SPAN = 臂展
+
+## Error collection consent modal
+
+error_collection_modal-title = 我们可以收集错误信息吗？
+error_collection_modal-description_v2 =
+    { settings-interface-behavior-error_tracking-description_v2 }
+    
+    您可以稍后在设置页面的行为部分中更改此设置。
+error_collection_modal-confirm = 我同意
+error_collection_modal-cancel = 还是算了

gui/public/i18n/zh-Hant/translation.ftl

@@ -7,8 +7,13 @@
 
 ## Websocket (server) status
 
-websocket-connecting = 正在連接伺服器
-websocket-connection_lost = 與伺服器的連線已中斷，正在嘗試重新連線……
+websocket-connecting = 載入中…
+websocket-connection_lost = 伺服器當機了！
+websocket-connection_lost-desc = SlimeVR 伺服器程式似乎當機了。請檢查日誌並重新啟動程式
+websocket-timedout = 無法連接到伺服器
+websocket-timedout-desc = SlimeVR 伺服器程式似乎已當機或逾時。請檢查日誌並重新啟動程式
+websocket-error-close = 退出 SlimeVR
+websocket-error-logs = 開啟日誌資料夾
 
 ## Update notification
 
@@ -49,43 +54,189 @@ body_part-LEFT_HAND = 左手
 body_part-LEFT_UPPER_LEG = 左大腿
 body_part-LEFT_LOWER_LEG = 左腳踝
 body_part-LEFT_FOOT = 左腳
+body_part-LEFT_THUMB_METACARPAL = 左拇指掌骨
+body_part-LEFT_THUMB_PROXIMAL = 左拇指近端
+body_part-LEFT_THUMB_DISTAL = 左拇指遠端
+body_part-LEFT_INDEX_PROXIMAL = 左食指近端
+body_part-LEFT_INDEX_INTERMEDIATE = 左食指中端
+body_part-LEFT_INDEX_DISTAL = 左食指遠端
+body_part-LEFT_MIDDLE_PROXIMAL = 左中指近端
+body_part-LEFT_MIDDLE_INTERMEDIATE = 左中指中端
+body_part-LEFT_MIDDLE_DISTAL = 左中指遠端
+body_part-LEFT_RING_PROXIMAL = 左無名指近端
+body_part-LEFT_RING_INTERMEDIATE = 左無名指中端
+body_part-LEFT_RING_DISTAL = 左無名指遠端
+body_part-LEFT_LITTLE_PROXIMAL = 左小指近端
+body_part-LEFT_LITTLE_INTERMEDIATE = 左小指中端
+body_part-LEFT_LITTLE_DISTAL = 左小指遠端
+body_part-RIGHT_THUMB_METACARPAL = 右拇指掌骨
+body_part-RIGHT_THUMB_PROXIMAL = 右拇指近端
+body_part-RIGHT_THUMB_DISTAL = 右拇指遠端
+body_part-RIGHT_INDEX_PROXIMAL = 右食指近端
+body_part-RIGHT_INDEX_INTERMEDIATE = 右食指中端
+body_part-RIGHT_INDEX_DISTAL = 右食指遠端
+body_part-RIGHT_MIDDLE_PROXIMAL = 右中指近端
+body_part-RIGHT_MIDDLE_INTERMEDIATE = 右中指中端
+body_part-RIGHT_MIDDLE_DISTAL = 右中指遠端
+body_part-RIGHT_RING_PROXIMAL = 右無名指近端
+body_part-RIGHT_RING_INTERMEDIATE = 右無名指中端
+body_part-RIGHT_RING_DISTAL = 右無名指遠端
+body_part-RIGHT_LITTLE_PROXIMAL = 右小指近端
+body_part-RIGHT_LITTLE_INTERMEDIATE = 右小指中端
+body_part-RIGHT_LITTLE_DISTAL = 右小指遠端
+
+## BoardType
+
+board_type-UNKNOWN = 不明
+board_type-NODEMCU = NodeMCU
+board_type-CUSTOM = 自訂主板
+board_type-WROOM32 = WROOM32
+board_type-WEMOSD1MINI = Wemos D1 Mini
+board_type-TTGO_TBASE = TTGO T-Base
+board_type-ESP01 = ESP-01
+board_type-SLIMEVR = SlimeVR
+board_type-LOLIN_C3_MINI = Lolin C3 Mini
+board_type-BEETLE32C3 = Beetle ESP32-C3
+board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
+board_type-OWOTRACK = owoTrack
+board_type-WRANGLER = Wrangler Joy-Con
+board_type-MOCOPI = Sony mocopi
+board_type-WEMOSWROOM02 = WeMos WROOM-02 D1 Mini
+board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
+board_type-HARITORA = Haritora
+board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
+board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU 手套
 
 ## Proportions
 
 skeleton_bone-NONE = 無
 skeleton_bone-HEAD = 頭部偏移
+skeleton_bone-HEAD-desc =
+    這是從頭戴顯示器到頭中央的距離。
+    若要調整，請左右搖頭（如不同意、否定般的樣子），檢查其他追蹤器的數值跳
+    動並變更此參數，直到數值跳動小到可以忽略不計。
 skeleton_bone-NECK = 頸部長度
+skeleton_bone-NECK-desc =
+    這是從頭中央到脖子底部的距離。
+    若要調整，請上下點頭（如同意、肯定般的樣子），或將頭倒向兩側肩膀，檢查
+    其他追蹤器的數值跳動並變更此參數，直到數值跳動小到可以忽略不計。
 skeleton_bone-torso_group = 軀幹長度
+skeleton_bone-torso_group-desc =
+    這是從脖子底部到臀部的距離。
+    若要調整，請站立並調整此參數，直到虛擬的臀部與實際臀部對齊。
 skeleton_bone-UPPER_CHEST = 上胸長度
+skeleton_bone-UPPER_CHEST-desc =
+    這是從脖子底部到胸部中間的距離。
+    若要調整，請適當調整軀幹長度，檢查各種姿勢（坐下、彎腰、躺下等）並進行
+    修改，直到虛擬的脊椎與實際脊椎對齊。
 skeleton_bone-CHEST_OFFSET = 胸部偏移
+skeleton_bone-CHEST_OFFSET-desc =
+    調整胸部追蹤器的上下補償。某些遊戲或是應用程式可能會期待追蹤器比較上面
+    或下面，可以透過調整本數值來校正。
 skeleton_bone-CHEST = 胸部長度
+skeleton_bone-CHEST-desc =
+    這是從胸部中間到脊椎中間的距離。
+    若要調整，請適當調整軀幹長度，檢查各種姿勢（坐下、彎腰、躺下等）並進行
+    修改，直到虛擬的脊椎與實際脊椎對齊。
 skeleton_bone-WAIST = 腰部長度
+skeleton_bone-WAIST-desc =
+    這是從脊椎中間到肚臍的距離。
+    若要調整，請適當調整軀幹長度，檢查各種姿勢（坐下、彎腰、躺下等）並進行
+    修改，直到虛擬的脊椎與實際脊椎對齊。
 skeleton_bone-HIP = 臀部長度
+skeleton_bone-HIP-desc =
+    這是從肚臍到臀部的距離。
+    若要調整，請適當調整軀幹長度，檢查各種姿勢（坐下、彎腰、躺下等）並進行
+    修改，直到虛擬的脊椎與實際脊椎對齊。
 skeleton_bone-HIP_OFFSET = 臀部偏移
+skeleton_bone-HIP_OFFSET-desc =
+    調整臀部追蹤器的上下補償。某些遊戲或是應用程式可能會期待追蹤器在腰部，
+    可以透過調整本數值來校正。
 skeleton_bone-HIPS_WIDTH = 臀部寬度
+skeleton_bone-HIPS_WIDTH-desc =
+    這是兩腿之間的起始距離。
+    若要調整，請站直進行完整重置後，修改到虛擬的腿部與實際腿部對齊。
 skeleton_bone-leg_group = 腿部長度
+skeleton_bone-leg_group-desc =
+    這是從臀部到腳部的距離。
+    若要調整，請適當調整軀幹長度後，修改此數值，直到虛擬的腳部
+    與實際腳部的高度一致。
 skeleton_bone-UPPER_LEG = 大腿長度
+skeleton_bone-UPPER_LEG-desc =
+    這是從臀部到膝蓋的距離。
+    若要調整，請適當調整腿部長度後，修改此數值，直到虛擬的膝蓋
+    與實際膝蓋的高度一致。
 skeleton_bone-LOWER_LEG = 小腿長度
+skeleton_bone-LOWER_LEG-desc =
+    這是從膝蓋到腳踝的距離。
+    若要調整，請適當調整腿部長度後，修改此數值，直到虛擬的膝蓋
+    與實際膝蓋的高度一致。
 skeleton_bone-FOOT_LENGTH = 腳部長度
+skeleton_bone-FOOT_LENGTH-desc =
+    這是從腳踝到腳趾的距離。
+    若要調整，請踮起腳尖，修改此數值，直到虛擬的腳部與實際腳部對齊。
 skeleton_bone-FOOT_SHIFT = 腳部偏移
+skeleton_bone-FOOT_SHIFT-desc =
+    這是從膝蓋到腳踝的水平距離。
+    這個數值可以校正站直時小腿會向後移動的問題。
+    若要調整，請將腳部長度設為 0，進行完整重置後再修改，直到虛擬腳部與
+    腳踝中間對齊。
 skeleton_bone-SKELETON_OFFSET = 骨骼偏移
+skeleton_bone-SKELETON_OFFSET-desc =
+    調整全部追蹤器的向前或向後補償。某些遊戲或是應用程式可能會期待追蹤器
+    比較前面，可以透過調整本數值來校正。
 skeleton_bone-SHOULDERS_DISTANCE = 肩膀距離
+skeleton_bone-SHOULDERS_DISTANCE-desc =
+    這是從脖子底部到肩膀的垂直距離。
+    若要調整，請將上臂長度設為 0 再修改，直到虛擬的肘部追蹤器與
+    實際的肩膀垂直對齊。
 skeleton_bone-SHOULDERS_WIDTH = 肩膀寬度
+skeleton_bone-SHOULDERS_WIDTH-desc =
+    這是從脖子底部到肩膀的水平距離。
+    若要調整，請將上臂長度設為 0 再修改，直到虛擬的肘部追蹤器與
+    實際的肩膀水平對齊。
 skeleton_bone-arm_group = 手臂長度
+skeleton_bone-arm_group-desc =
+    這是從肩膀到手腕的距離。
+    若要調整，請適當調整肩膀距離，將手部距離 Y 設定為 0 再修改，
+    直到虛擬的手部追蹤器與手腕對齊。
 skeleton_bone-UPPER_ARM = 上臂長度
+skeleton_bone-UPPER_ARM-desc =
+    這是從肩膀到手肘的距離。
+    若要調整，請適當調整手臂長度後，修改此數值，直到虛擬的
+    手肘追蹤器與實際手肘的位置一致。
 skeleton_bone-LOWER_ARM = 前臂長度
+skeleton_bone-LOWER_ARM-desc =
+    這是從手肘到手腕的距離。
+    若要調整，請適當調整手臂長度後，修改此數值，直到虛擬的
+    手肘追蹤器與實際手肘的位置一致。
 skeleton_bone-HAND_Y = 手部距離Y
+skeleton_bone-HAND_Y-desc =
+    這是從手腕到手中間的垂直距離。
+    若要調整以進行動作捕捉，請適當調整手臂長度後修改此數值，直到虛擬的手部追蹤器
+    與實際的手中間垂直對齊。
+    若要調整以從控制器進行肘部跟蹤，請將手臂長度設為 0 後修改此數值，直到虛擬的肘
+    部追蹤器與實際的手腕垂直對齊。
 skeleton_bone-HAND_Z = 手部距離Z
+skeleton_bone-HAND_Z-desc =
+    這是從手腕到手中間的水平距離。
+    若要調整以進行動作捕捉，請將此值設定為 0。
+    若要調整以從控制器進行肘部跟蹤，請將手臂長度設為 0 後修改此數值，直到虛擬的肘
+    部追蹤器與實際的手腕水平對齊。
 skeleton_bone-ELBOW_OFFSET = 肘部偏移
+skeleton_bone-ELBOW_OFFSET-desc = 將虛擬的肘部追蹤器向上或向下調整，以避免 VRChat 將肘部追蹤器綁到胸部。
 
 ## Tracker reset buttons
 
 reset-reset_all = 重置軀幹比例
-reset-reset_all_warning =
-    <b>警告：</b> 這會將軀幹比例重置為僅基於身高的比例。
-    你確定要執行此操作嗎？
+reset-reset_all_warning-v2 =
+    <b>警告：</b>軀幹比例將會重置成預設值，並依你的身高等比例調整。
+    確定要繼續嗎？
 reset-reset_all_warning-reset = 重置軀幹比例
 reset-reset_all_warning-cancel = 取消
+reset-reset_all_warning_default-v2 =
+    <b>警告：</b>由於尚未設定身高，軀幹比例將會重置為使用預設身高的預設值。
+    確定要繼續嗎？
 reset-full = 完整重置
 reset-mounting = 配戴重置
 reset-yaw = 左右偏擺重置
@@ -139,7 +290,7 @@ widget-developer_mode = 開發者選項
 widget-developer_mode-high_contrast = 高對比 UI
 widget-developer_mode-precise_rotation = 顯示精確旋轉
 widget-developer_mode-fast_data_feed = 快速資料更新
-widget-developer_mode-filter_slimes_and_hmd = 只顯示 Slime 追蹤器與頭戴顯示器
+widget-developer_mode-filter_slimes_and_hmd = 只顯示 SlimeVR 追蹤器與頭戴顯示器
 widget-developer_mode-sort_by_name = 依名稱排序
 widget-developer_mode-raw_slime_rotation = 顯示原始旋轉
 widget-developer_mode-more_info = 更多資訊
@@ -153,6 +304,7 @@ widget-imu_visualizer-rotation_raw = 原始旋轉
 widget-imu_visualizer-rotation_preview = 預覽
 widget-imu_visualizer-acceleration = 加速度
 widget-imu_visualizer-position = 位置
+widget-imu_visualizer-stay_aligned = 持續校正
 
 ## Widget: Skeleton Visualizer
 
@@ -180,6 +332,7 @@ tracker-table-column-temperature = 溫度 ℃
 tracker-table-column-linear-acceleration = 加速度 X/Y/Z
 tracker-table-column-rotation = 旋轉 X/Y/Z
 tracker-table-column-position = 位置 X/Y/Z
+tracker-table-column-stay_aligned = 持續校正
 tracker-table-column-url = URL
 
 ## Tracker rotation
@@ -204,6 +357,7 @@ tracker-infos-url = 追蹤器 URL
 tracker-infos-version = 韌體版本
 tracker-infos-hardware_rev = 硬體版本
 tracker-infos-hardware_identifier = 硬體 ID
+tracker-infos-data_support = 資料型態
 tracker-infos-imu = 慣性測量單元 (IMU)
 tracker-infos-board_type = 主板
 tracker-infos-network_version = 通訊協定版本
@@ -244,6 +398,12 @@ tracker-settings-name_section-label = 追蹤器名稱
 tracker-settings-forget = 忘記追蹤器
 tracker-settings-forget-description = 從 SlimeVR 伺服器程式中移除該追蹤器，且直到重新啟動伺服器前不會再次連接。該追蹤器的設定不會遺失。
 tracker-settings-forget-label = 忘記追蹤器
+tracker-settings-update-unavailable = 無法更新 (DIY)
+tracker-settings-update-low-battery = 無法更新，電池電量低於 50%
+tracker-settings-update-up_to_date = 已為最新版本
+tracker-settings-update-available = 版本 { $versionName } 可供更新
+tracker-settings-update = 立即更新
+tracker-settings-update-title = 韌體版本
 
 ## Tracker part card info
 
@@ -310,6 +470,7 @@ mounting_selection_menu-close = 關閉
 settings-sidebar-title = 設定
 settings-sidebar-general = 一般設定
 settings-sidebar-tracker_mechanics = 追蹤機制
+settings-sidebar-stay_aligned = 持續校正
 settings-sidebar-fk_settings = 追蹤設定
 settings-sidebar-gesture_control = 手勢控制
 settings-sidebar-interface = 使用者介面
@@ -319,6 +480,9 @@ settings-sidebar-utils = 工具
 settings-sidebar-serial = 串列埠終端
 settings-sidebar-appearance = 外觀
 settings-sidebar-notifications = 通知
+settings-sidebar-behavior = 行為
+settings-sidebar-firmware-tool = DIY 韌體工具
+settings-sidebar-vrc_warnings = VRChat 配置警告
 settings-sidebar-advanced = 進階
 
 ## SteamVR settings
@@ -400,6 +564,25 @@ settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
     在所有有韌體支援的追蹤器上使用磁力計，在磁場穩定的環境中可以減緩偏移。
     開啟此選項後，可以個別在追蹤器選項內停用磁力計。<b>切換此選項時請勿關閉任何一個追蹤器的電源！</b>
 settings-general-tracker_mechanics-use_mag_on_all_trackers-label = 在追蹤器上啟用磁力計
+settings-stay_aligned = 持續校正
+settings-stay_aligned-description = 持續校正功能會逐漸調整追蹤器以對齊到設定的放鬆姿態，進而減少追蹤器偏移的影響。
+settings-stay_aligned-setup-label = 設定持續校正
+settings-stay_aligned-setup-description = 完成「設定持續校正」後，才可啟用持續校正功能。
+settings-stay_aligned-warnings-drift_compensation = ⚠ 啟用持續校正時請關閉偏移補償功能，避免發生干擾。
+settings-stay_aligned-enabled-label = 調整追蹤器
+settings-stay_aligned-hide_yaw_correction-label = 隱藏調整效果（可與關閉持續校正的效果對比）
+settings-stay_aligned-general-label = 一般設定
+settings-stay_aligned-relaxed_poses-label = 放鬆的姿態
+settings-stay_aligned-relaxed_poses-description = 持續校正功能會使用各種放鬆的姿態保持追蹤器的定位。請使用「設定持續校正」來更新設定的姿態。
+settings-stay_aligned-relaxed_poses-standing = 使用站立姿勢調整追蹤器
+settings-stay_aligned-relaxed_poses-sitting = 使用坐在椅子上的姿勢調整追蹤器
+settings-stay_aligned-relaxed_poses-flat = 使用坐在地板上或躺下的姿勢調整追蹤器
+settings-stay_aligned-relaxed_poses-save_pose = 儲存姿勢
+settings-stay_aligned-relaxed_poses-reset_pose = 重置姿勢
+settings-stay_aligned-relaxed_poses-close = 關閉
+settings-stay_aligned-debug-label = 除錯資訊
+settings-stay_aligned-debug-description = 在回報與持續校正相關的問題時，請附上以下設定參數。
+settings-stay_aligned-debug-copy-label = 複製設定參數進剪貼簿
 
 ## FK/Tracking settings
 
@@ -412,17 +595,22 @@ settings-general-fk_settings-leg_tweak-floor_clip = 地板限制
 # why the name - without this enabled the feet will often slide across the ground as if your skating across the ground,
 # since this largely prevents this it corrects for it hence skating correction (note this may be renamed to sliding correction)
 # definition - Guesses when each foot is in contact with the ground and uses that information to improve tracking
-settings-general-fk_settings-leg_tweak-skating_correction = 腳滑修正
+settings-general-fk_settings-leg_tweak-skating_correction = 腳滑補正
 settings-general-fk_settings-leg_tweak-toe_snap = 腳趾跟地
 settings-general-fk_settings-leg_tweak-foot_plant = 腳底貼地
-settings-general-fk_settings-leg_tweak-skating_correction-amount = 腳滑修正量
-settings-general-fk_settings-leg_tweak-skating_correction-description = 腳滑修正功能可以矯正腳滑溜冰的問題，但會降低某些動作的準確度。啟用本功能前請進行完整重置，並在遊戲內進行校正。
+settings-general-fk_settings-leg_tweak-skating_correction-amount = 腳滑補正量
+settings-general-fk_settings-leg_tweak-skating_correction-description = 腳滑補正功能可以矯正腳滑溜冰的問題，但會降低某些動作的準確度。啟用本功能前請進行完整重置，並在遊戲內進行校正。
 settings-general-fk_settings-leg_tweak-floor_clip-description = 地板限制功能可以減輕甚至解決腳部穿入地板的情況。啟用本功能前請進行完整重置，並在遊戲內進行校正。
 settings-general-fk_settings-leg_tweak-toe_snap-description = 腳趾跟地功能在沒有腳部的追蹤器時，會嘗試猜測腳掌的旋轉角度。
 settings-general-fk_settings-leg_tweak-foot_plant-description = 腳底貼地功能會在腳底與地面接觸時，將腳部旋轉成與地板平行。
 settings-general-fk_settings-leg_fk = 腿部追蹤
 settings-general-fk_settings-leg_fk-reset_mounting_feet-description = 開啟腳部配戴重置，進行配戴重置時需要踮起腳尖。
 settings-general-fk_settings-leg_fk-reset_mounting_feet = 腳部配戴重置
+settings-general-fk_settings-enforce_joint_constraints = 骨架限制
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = 約束關節旋轉
+settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = 避免關節旋轉超出極限
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints = 以約束修正關節旋轉
+settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = 若關節旋轉角度超出極限時，修正旋轉角度
 settings-general-fk_settings-arm_fk = 手臂追蹤
 settings-general-fk_settings-arm_fk-description = 強制透過頭戴顯示器來追蹤手臂，即使有手部的定位資料。
 settings-general-fk_settings-arm_fk-force_arms = 強制從頭戴顯示器進行手臂追蹤
@@ -454,9 +642,6 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = 膝
 settings-general-fk_settings-skeleton_settings-interp_knee_ankle = 膝部的偏航軸與翻滾軸，與腳踝定位平均的比例
 settings-general-fk_settings-self_localization-title = 動作捕捉模式
 settings-general-fk_settings-self_localization-description = 動作捕捉模式允許在沒有頭戴顯示器或其他追蹤器時，粗略的追蹤身體骨架的定位。請注意，本功能需要腳部與頭部的追蹤器，並且本功能仍在實驗階段。
-settings-general-fk_settings-vive_emulation-title = Vive 模擬
-settings-general-fk_settings-vive_emulation-description = 模擬 Vive 追蹤器的腰部追蹤失效問題。（ 註：這是一個玩笑功能，會降低追蹤品質。）
-settings-general-fk_settings-vive_emulation-label = 開啟 Vive 模擬
 
 ## Gesture control settings (tracker tapping)
 
@@ -507,7 +692,7 @@ settings-interface-appearance-font-slime_font = 預設字體
 settings-interface-appearance-font_size = 文字縮放
 settings-interface-appearance-font_size-description = 本設定會影響整個 UI 的文字大小，除了本設定面板以外。
 settings-interface-appearance-decorations = 使用系統原生的視窗邊框
-settings-interface-appearance-decorations-description = 不顯示標題列 UI，替換成作業系統提供的標題列。
+settings-interface-appearance-decorations-description = 不顯示標題列 UI，使用作業系統提供的標題列。
 settings-interface-appearance-decorations-label = 使用原生的視窗邊框
 
 ## Notification settings
@@ -523,6 +708,13 @@ settings-general-interface-feedback_sound-volume = 聲音回饋音量
 settings-general-interface-connected_trackers_warning = 已連接追蹤器警告
 settings-general-interface-connected_trackers_warning-description = 啟用本選項後，每次當退出 SlimeVR 時仍有追蹤器連接著會顯示通知，提醒你在使用完畢時關閉追蹤器電源來節省電池電量。
 settings-general-interface-connected_trackers_warning-label = 當退出程式時，有追蹤器連接中則顯示警告
+
+## Behavior settings
+
+settings-interface-behavior = 行為
+settings-general-interface-dev_mode = 開發者模式
+settings-general-interface-dev_mode-description = 本功能會提供更深入的資料，也能與已連線的追蹤器進行更進一步的控制。
+settings-general-interface-dev_mode-label = 開發者模式
 settings-general-interface-use_tray = 最小化到系統列
 settings-general-interface-use_tray-description = 本選項可以讓你在關閉視窗時不會關閉 SlimeVR 的伺服器程式，讓你在不受圖形介面的打擾下繼續使用追蹤器。
 settings-general-interface-use_tray-label = 最小化到系統列
@@ -534,6 +726,14 @@ settings-general-interface-discord_presence-message =
         [0] 正在捕捉史萊姆
        *[other] 正在使用 { $amount } 個追蹤器
     }
+settings-interface-behavior-error_tracking = 透過 Sentry.io 收集錯誤資訊
+settings-interface-behavior-error_tracking-description_v2 =
+    <h1>你是否同意我們蒐集匿名化的錯誤資料？</h1>
+    
+    <b>我們不會收集個人資訊</b> ，例如你的 IP 位址或無線網路認證資訊。SlimeVR 重視你的隱私！
+    
+    為了提供最佳的使用者體驗，我們會蒐集匿名化的錯誤報告、性能指標和作業系統資訊，這會對我們檢測 SlimeVR 的錯誤和問題有所幫助。我們會透過 Sentry.io 來蒐集這些指標。
+settings-interface-behavior-error_tracking-label = 向開發者傳送錯誤資訊
 
 ## Serial settings
 
@@ -589,10 +789,16 @@ settings-osc-vrchat = VRChat OSC 追蹤器
 settings-osc-vrchat-description-v1 =
     變更 OSC 追蹤器標準的設定，該標準可用於傳送追蹤器資料到不使用 SteamVR 的應用程式（例如 Quest 單機版）。
     請確保 VRChat 中的動作選單內，OSC 設定「選項→OSC→已啟用」已經開啟。
-    SlimeVR 若要能透過 VRChat 接收頭戴顯示器以及控制器的資料，請進入主選單的設定，並開啟「追蹤 & IK→允許透過 OSC 發送頭部與腕部的 VR 追蹤數據」。
 settings-osc-vrchat-enable = 啟用
 settings-osc-vrchat-enable-description = 切換資料的傳送和接收。
 settings-osc-vrchat-enable-label = 啟用
+settings-osc-vrchat-oscqueryEnabled = 啟用 OSCQuery
+settings-osc-vrchat-oscqueryEnabled-description =
+    OSCQuery 會自動偵測並發送數據給正在執行中的 VRChat 程式。
+    也會把自己廣告給其他應用程式，以接收頭戴顯示器與控制器的數據。
+    要允許從 VRChat 接收頭戴顯示器與控制器的數據，請進入主選單的設定
+    在「追蹤 & IK」下，啟用「允許透過 OSC 發送頭部與腕部的 VR 追蹤數據」。
+settings-osc-vrchat-oscqueryEnabled-label = 啟用 OSCQuery
 settings-osc-vrchat-network = 連接埠
 settings-osc-vrchat-network-description-v1 = 設定收發追蹤器資料的連接埠埠號，使用 VRChat 不須更改。
 settings-osc-vrchat-network-port_in =
@@ -635,12 +841,7 @@ settings-osc-vmc-network-address-description = 設定用來發送 VMC 資料的
 settings-osc-vmc-network-address-placeholder = IPV4 地址
 settings-osc-vmc-vrm = VRM 模型
 settings-osc-vmc-vrm-description = 載入 VRM 模型以允許頭部錨定，並與其他應用程式有更高的相容性。
-settings-osc-vmc-vrm-model_unloaded = 未載入模型
-settings-osc-vmc-vrm-model_loaded =
-    { $titled ->
-        [true] 已載入模型：{ $name }
-       *[other] 已載入未命名的模型
-    }
+settings-osc-vmc-vrm-untitled_model = 未命名模型
 settings-osc-vmc-vrm-file_select = 拖曳檔案或 <u>瀏覽檔案</u> 以載入模型
 settings-osc-vmc-anchor_hip = 臀部錨定
 settings-osc-vmc-anchor_hip-description = 將追蹤錨定在臀部，有利於坐姿進行虛擬直播。若本選項無法切換，請載入 VRM 模型。
@@ -675,9 +876,12 @@ settings-utils-advanced-reset_warning =
     }
 settings-utils-advanced-reset_warning-reset = 重置設定
 settings-utils-advanced-reset_warning-cancel = 取消
-settings-utils-advanced-open_data = 數據資料夾
-settings-utils-advanced-open_data-description = 在檔案管理器中開啟 SlimeVR 的數據資料夾，該資料夾包含設定與記錄檔。
+settings-utils-advanced-open_data-v1 = 設定資料夾
+settings-utils-advanced-open_data-description-v1 = 在檔案管理器中開啟 SlimeVR 的設定資料夾，該資料夾包含程式的設定。
 settings-utils-advanced-open_data-label = 打開資料夾
+settings-utils-advanced-open_logs = 記錄檔資料夾
+settings-utils-advanced-open_logs-description = 在檔案管理器中開啟 SlimeVR 的記錄檔資料夾，該資料夾包含程式的記錄檔。
+settings-utils-advanced-open_logs-label = 打開資料夾
 
 ## Setup/onboarding menu
 
@@ -704,6 +908,7 @@ onboarding-wifi_creds-submit = 送出！
 onboarding-wifi_creds-ssid =
     .label = Wi-Fi 名稱
     .placeholder = 請輸入 Wi-Fi 名稱
+onboarding-wifi_creds-ssid-required = 必須填寫 Wi-Fi 名稱
 onboarding-wifi_creds-password =
     .label = 密碼
     .placeholder = 輸入密碼
@@ -760,13 +965,25 @@ onboarding-connect_tracker-description-p1-v1 = 透過 USB 埠，一次連接一
 onboarding-connect_tracker-issue-serial = 我在連接時碰到問題了！
 onboarding-connect_tracker-usb = USB 追蹤器
 onboarding-connect_tracker-connection_status-none = 正在尋找追蹤器
-onboarding-connect_tracker-connection_status-serial_init = 正在連線到序列裝置
+onboarding-connect_tracker-connection_status-serial_init = 正在連線到串列埠裝置
+onboarding-connect_tracker-connection_status-obtaining_mac_address = 正在取得追蹤器的 MAC 位址
 onboarding-connect_tracker-connection_status-provisioning = 正在傳送 Wi-Fi 認證資訊
 onboarding-connect_tracker-connection_status-connecting = 正在傳送 Wi-Fi 資訊
 onboarding-connect_tracker-connection_status-looking_for_server = 正在尋找伺服器
 onboarding-connect_tracker-connection_status-connection_error = 無法連線到 Wi-Fi
 onboarding-connect_tracker-connection_status-could_not_find_server = 未尋找到可用的伺服器
 onboarding-connect_tracker-connection_status-done = 已連線到伺服器
+onboarding-connect_tracker-connection_status-no_serial_log = 無法從追蹤器取得紀錄訊息
+onboarding-connect_tracker-connection_status-no_serial_device_found = 無法透過 USB 找到追蹤器
+onboarding-connect_serial-error-modal-no_serial_log = 追蹤器電源開了嗎？
+onboarding-connect_serial-error-modal-no_serial_log-desc = 請確認追蹤器電源已開啟，並連接到這台電腦上
+onboarding-connect_serial-error-modal-no_serial_device_found = 找不到追蹤器
+onboarding-connect_serial-error-modal-no_serial_device_found-desc =
+    請使用隨附的 USB 傳輸線將追蹤器連接到你的電腦後，再打開追蹤器電源。
+    如果還是不行，請嘗試以下操作：
+      - 使用另一條 USB 傳輸線
+      - 使用另一個 USB 插座
+      - 重新安裝 SlimeVR 伺服器程式，然後在安裝元件部分將「USB drivers」打勾
 # $amount (Number) - Amount of trackers connected (this is a number, but you can use CLDR plural rules for your language)
 # More info on https://www.unicode.org/cldr/cldr-aux/charts/22/supplemental/language_plural_rules.html
 # English in this case only has 2 plural rules, which are "one" and "other",
@@ -941,44 +1158,27 @@ onboarding-automatic_mounting-mounting_reset-title = 配戴重置
 onboarding-automatic_mounting-mounting_reset-step-0 = 1. 雙腿彎曲以滑雪的姿勢蹲下，上身向前傾斜，手臂彎曲。
 onboarding-automatic_mounting-mounting_reset-step-1 = 2. 按下「配戴重置」按鈕並等待 3 秒鐘，追蹤器的配戴方向將被重置。
 onboarding-automatic_mounting-preparation-title = 準備
-onboarding-automatic_mounting-preparation-step-0 = 1. 身體直立，雙臂放在身體兩側。
-onboarding-automatic_mounting-preparation-step-1 = 2. 按下「完整重置」按鈕，等待 3 秒鐘，追蹤器將會重置。
+onboarding-automatic_mounting-preparation-v2-step-0 = 1. 請按下「完整重置」按鈕。
+onboarding-automatic_mounting-preparation-v2-step-1 = 2. 站直，雙臂放在身體兩側，確保向前直視。
+onboarding-automatic_mounting-preparation-v2-step-2 = 3. 保持姿勢直到 3 秒倒數結束。
 onboarding-automatic_mounting-put_trackers_on-title = 請戴好追蹤器
 onboarding-automatic_mounting-put_trackers_on-description = 為了校準配戴方向，我們將使用剛才分配的追蹤器。戴上你所有的追蹤器，你可以在右邊的圖中看到追蹤器的對應部位。
 onboarding-automatic_mounting-put_trackers_on-next = 我所有的追蹤器都戴好了！
 
-## Tracker proportions method choose
-
-onboarding-choose_proportions = 要使用哪一種軀幹比例的校正方式？
-# Multiline string
-onboarding-choose_proportions-description-v1 =
-    軀幹比例用於取得身體各個部位的長短，為計算追蹤器的位置而有所必要。
-    當你的軀幹比例與設定的比例有差異時，追蹤精確度會變差，你可能會注意到出現腳滑溜冰的情形，或者你的身體與你的虛擬角色對不太上。
-    <b>軀幹比例的測量只需要進行一次！</b>除非設定有誤，或是身材有明顯變化，本設定不需要重複進行。
-onboarding-choose_proportions-auto_proportions = 自動軀幹比例校正
-# Italicized text
-onboarding-choose_proportions-auto_proportions-subtitle = 推薦使用
-onboarding-choose_proportions-auto_proportions-descriptionv3 =
-    本選項會從你的身體動作錄製一段樣本，並通過演算法來推算你的軀幹比例。
-    
-    <b>使用本功能需要連接頭戴顯示器到 SlimeVR，並且配戴在頭部！</b>
-onboarding-choose_proportions-manual_proportions = 手動軀幹比例校正
-# Italicized text
-onboarding-choose_proportions-manual_proportions-subtitle = 適合進行微調
-onboarding-choose_proportions-manual_proportions-description = 本選項可以讓你直接修改軀幹比例的設定值
-onboarding-choose_proportions-export = 匯出軀幹比例
-onboarding-choose_proportions-import = 匯入軀幹比例
-onboarding-choose_proportions-import-success = 匯入成功
-onboarding-choose_proportions-import-failed = 匯入失敗
-onboarding-choose_proportions-file_type = 軀幹比例描述檔
-
-## Tracker manual proportions setup
+## Tracker manual proportions setupa
 
 onboarding-manual_proportions-back = 返回重置教學
 onboarding-manual_proportions-title = 手動調整軀幹比例
-onboarding-manual_proportions-precision = 精確調整
-onboarding-manual_proportions-auto = 進行自動校正
-onboarding-manual_proportions-ratio = 依比例分組調整
+onboarding-manual_proportions-fine_tuning_button = 自動微調軀幹比例
+onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = 請連接 VR 頭戴顯示器以使用此功能
+onboarding-manual_proportions-export = 匯出軀幹比例
+onboarding-manual_proportions-import = 匯入軀幹比例
+onboarding-manual_proportions-file_type = 軀幹比例描述檔
+onboarding-manual_proportions-normal_increment = 正常調整
+onboarding-manual_proportions-precise_increment = 精確調整
+onboarding-manual_proportions-grouped_proportions = 分組調整軀幹比例
+onboarding-manual_proportions-all_proportions = 全部軀幹比例
+onboarding-manual_proportions-estimated_height = 預估的使用者身高
 
 ## Tracker automatic proportions setup
 
@@ -1001,19 +1201,31 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
     頭戴顯示器會回報定位資料給 SlimeVR 伺服器（通常為執行 SteamVR 並透過 SlimeVR 的 SteamVR 驅動程式來連接 SlimeVR）。
     追蹤狀態正常且能反映你的移動姿態（例如，進行完全重置後，踢腿、彎曲、坐下時的肢體方向是正確的）。
 onboarding-automatic_proportions-requirements-next = 我已閱讀使用需求
-onboarding-automatic_proportions-check_height-title = 檢查你的身高
-onboarding-automatic_proportions-check_height-description = 我們會透過頭戴顯示器回報的高度來推算你的實際身高，但仍建議檢查數值是否正確。
+onboarding-automatic_proportions-check_height-title-v3 = 測量頭戴顯示器高度
+onboarding-automatic_proportions-check_height-description-v2 = 你的頭戴顯示器 (HMD) 高度應略小於您的身高全長，因為頭戴顯示器會測量你的眼睛高度。本測量會被做為計算軀幹比例的基礎值。
 # All the text is in bold!
-onboarding-automatic_proportions-check_height-calculation_warning = 請<u>站直</u>並按下按鈕以計算身高，按下按鈕後你有 3 秒鐘來調整姿勢。
-onboarding-automatic_proportions-check_height-guardian_tip = 如果你使用的是一體式 VR 頭顯，請確認頭盔的守護神/邊界設定已經開啟，以確保身高能正確測量。
-onboarding-automatic_proportions-check_height-fetch_height = 我站著了！
+onboarding-automatic_proportions-check_height-calculation_warning-v3 = 在<u>直立</u>時開始測量以量出你的身高。請注意不要將手抬高過於頭戴顯示器，因為會影響測量。
+onboarding-automatic_proportions-check_height-guardian_tip = 如果你使用的是一體式 VR 頭戴顯示器，請確認守護神/邊界設定已經開啟，以確保身高能正確測量。
 # Context is that the height is unknown
 onboarding-automatic_proportions-check_height-unknown = 不明
 # Shows an element below it
-onboarding-automatic_proportions-check_height-hmd_height1 = 你的頭戴顯示器高度是
+onboarding-automatic_proportions-check_height-hmd_height2 = 頭戴顯示器的高度為：
+onboarding-automatic_proportions-check_height-measure-start = 開始測量
+onboarding-automatic_proportions-check_height-measure-stop = 停止測量
+onboarding-automatic_proportions-check_height-measure-reset = 重新測量
+onboarding-automatic_proportions-check_height-next_step = 使用頭戴顯示器高度
+onboarding-automatic_proportions-check_floor_height-title = 測量地板高度（選用）
+onboarding-automatic_proportions-check_floor_height-description = 在某些情況下，頭戴顯示器可能無法正確設定地板高度，導致頭戴顯示器測得的高度高於應有的高度。你可以測量地板的「高度」以校正頭戴顯示器的高度。
+# All the text is in bold!
+onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = 開始測量並將控制器擺放在地板上以測量地板高度。若你確定地板高度是正確的，本步驟可以跳過。
 # Shows an element below it
-onboarding-automatic_proportions-check_height-height1 = 所以你的實際身高是
-onboarding-automatic_proportions-check_height-next_step = 數值沒問題
+onboarding-automatic_proportions-check_floor_height-floor_height = 你的地板高度是：
+onboarding-automatic_proportions-check_floor_height-full_height = 你的估計身高是：
+onboarding-automatic_proportions-check_floor_height-measure-start = 開始測量
+onboarding-automatic_proportions-check_floor_height-measure-stop = 停止測量
+onboarding-automatic_proportions-check_floor_height-measure-reset = 重新測量
+onboarding-automatic_proportions-check_floor_height-skip_step = 跳過本步驟並儲存
+onboarding-automatic_proportions-check_floor_height-next_step = 使用地板高度並儲存
 onboarding-automatic_proportions-start_recording-title = 準備擺動作囉
 onboarding-automatic_proportions-start_recording-description = 我們現在要記錄一些特定的姿勢和動作，將會在下一個畫面中提示。當按鈕被按下時，準備好開始！
 onboarding-automatic_proportions-start_recording-next = 開始錄製
@@ -1044,6 +1256,69 @@ onboarding-automatic_proportions-error_modal-v2 =
     這有可能是配戴校正的問題，請確保追蹤功能運作正常之後再試一次。
     <docs>請檢閱文件</docs>或加入我們的 <discord>Discord</discord> 以尋求幫助 ^_^
 onboarding-automatic_proportions-error_modal-confirm = 瞭解！
+onboarding-automatic_proportions-smol_warning =
+    你設定的身高 { $height } 小於可接受的最小身高 { $minHeight }。
+    <b>請重新進行測量，並確保數值是正確的。</b>
+onboarding-automatic_proportions-smol_warning-cancel = 返回
+
+## Tracker scaled proportions setup
+
+onboarding-scaled_proportions-title = 縮放型軀幹比例
+onboarding-scaled_proportions-description = 為了讓 SlimeVR 追蹤器正常使用，我們需要知道你的骨骼長度。本流程會使用人體的平均軀幹比例並依照你的身高縮放調整。
+onboarding-scaled_proportions-manual_height-title = 設定你的身高
+onboarding-scaled_proportions-manual_height-description-v2 = 身高會當作軀幹比例設定的基礎。
+onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR 目前尚未連接到 SlimeVR，因此無法根據頭戴顯示器測量身高。<b>請查閱說明文件，繼續操作請自行承擔風險！</b>
+onboarding-scaled_proportions-manual_height-height-v2 = 你的身高全長為
+onboarding-scaled_proportions-manual_height-estimated_height = 頭戴顯示器估計高度為：
+onboarding-scaled_proportions-manual_height-next_step = 繼續並儲存
+onboarding-scaled_proportions-manual_height-warning =
+    你現在正在手動設定縮放型軀幹比例，<b>這個方法僅在你使用 SlimeVR
+    不使用頭戴顯示器時推薦使用。</b>
+    
+    若要能自動設定縮放型軀幹比例，請按照以下步驟：
+onboarding-scaled_proportions-manual_height-warning-no_hmd = 連接 VR 頭戴顯示器
+onboarding-scaled_proportions-manual_height-warning-no_controllers = 檢查 VR 控制器是否正常連接，並在 SlimeVR 介面中分配到你的雙手
+
+## Tracker scaled proportions reset
+
+onboarding-scaled_proportions-reset_proportion-title = 重置軀幹比例
+onboarding-scaled_proportions-reset_proportion-description = 要依照身高設定軀幹比例，你現在需要重置相關設定。本按鈕會清除以前所設定的軀幹比例並提供基本配置。
+onboarding-scaled_proportions-done-title = 軀幹比例已設定
+onboarding-scaled_proportions-done-description = 軀幹比例現在已經依照你的身高設定。
+
+## Stay Aligned setup
+
+onboarding-stay_aligned-title = 持續校正
+onboarding-stay_aligned-description = 設定持續校正功能讓追蹤器保持對齊狀態。
+onboarding-stay_aligned-put_trackers_on-title = 請戴好追蹤器
+onboarding-stay_aligned-put_trackers_on-description = 為了保存放鬆中的姿態，我們將使用你剛才分配的追蹤器。戴上你所有的追蹤器，你可以在右邊的圖中看到追蹤器的對應部位。
+onboarding-stay_aligned-put_trackers_on-trackers_warning = 你目前已連接與分配的追蹤器少於 5 個，持續校正功能需要 5 個以上的追蹤器才能正常運作。
+onboarding-stay_aligned-put_trackers_on-next = 我所有的追蹤器都戴好了
+onboarding-stay_aligned-verify_mounting-title = 確認追蹤器的配戴狀態
+onboarding-stay_aligned-verify_mounting-step-0 = 持續校正功能需要良好的追蹤器配戴固定，否則體驗會不如預期。
+onboarding-stay_aligned-verify_mounting-step-1 = 1. 請站著四處走動。
+onboarding-stay_aligned-verify_mounting-step-2 = 2. 坐下並擺動你的腿跟腳。
+onboarding-stay_aligned-verify_mounting-step-3 = 3. 如果虛擬追蹤器不在正確的位置上，請調整追蹤器並重複這個流程。
+onboarding-stay_aligned-verify_mounting-redo_mounting = 重做配戴校正
+onboarding-stay_aligned-preparation-title = 準備
+onboarding-stay_aligned-preparation-tip = 請確保站直。你必須向前直視，並且兩臂垂到身體兩側。
+onboarding-stay_aligned-relaxed_poses-standing-title = 放鬆的站立姿勢
+onboarding-stay_aligned-relaxed_poses-standing-step-0 = 1. 請以舒適的姿態站著，保持放鬆。
+onboarding-stay_aligned-relaxed_poses-standing-step-1-v2 = 3. 請按下「儲存姿勢」按鈕。
+onboarding-stay_aligned-relaxed_poses-sitting-title = 放鬆的坐在椅子上的姿勢
+onboarding-stay_aligned-relaxed_poses-sitting-step-0 = 1. 請以舒適的姿態坐著，保持放鬆。
+onboarding-stay_aligned-relaxed_poses-sitting-step-1-v2 = 3. 請按下「儲存姿勢」按鈕。
+onboarding-stay_aligned-relaxed_poses-flat-title = 放鬆的坐在地板上的姿勢
+onboarding-stay_aligned-relaxed_poses-flat-step-0 = 1. 請以舒適的姿態坐在地板上，腿部朝前，保持放鬆。
+onboarding-stay_aligned-relaxed_poses-flat-step-1-v2 = 3. 請按下「儲存姿勢」按鈕。
+onboarding-stay_aligned-relaxed_poses-skip_step = 跳過
+onboarding-stay_aligned-done-title = 持續校正已啟用！
+onboarding-stay_aligned-done-description = 持續校正功能設定完成。
+onboarding-stay_aligned-done-description-2 = 設定完成。若需要重新校正姿勢，可以重新進行這個流程。
+onboarding-stay_aligned-previous_step = 上一步
+onboarding-stay_aligned-next_step = 下一步
+onboarding-stay_aligned-restart = 重新開始
+onboarding-stay_aligned-done = 完成
 
 ## Home
 
@@ -1068,6 +1343,150 @@ status_system-StatusSteamVRDisconnected =
     }
 status_system-StatusTrackerError = 追蹤器{ $trackerName }發生錯誤
 status_system-StatusUnassignedHMD = VR 頭戴顯示器應被分配為頭部追蹤器。
+status_system-StatusPublicNetwork = 你的網路設定檔目前設為「公開」，SlimeVR 為了能正常運作，不建議如此設定。 <PublicFixLink>此處提供修正的方法。</PublicFixLink>
+
+## Firmware tool globals
+
+firmware_tool-next_step = 下一步
+firmware_tool-previous_step = 上一步
+firmware_tool-ok = 看起來 OK
+firmware_tool-retry = 重試
+firmware_tool-loading = 載入中…
+
+## Firmware tool Steps
+
+firmware_tool = DIY 韌體工具
+firmware_tool-description = 本工具可以配置與燒錄 DIY 追蹤器
+firmware_tool-not_available = 唉呀，現在韌體工具無法使用。請稍後再來！
+firmware_tool-not_compatible = 韌體工具與這個版本的伺服器不相容。請更新伺服器！
+firmware_tool-board_step = 選擇主板
+firmware_tool-board_step-description = 請從以下列出的主板選擇一個。
+firmware_tool-board_pins_step = 檢查腳位
+firmware_tool-board_pins_step-description =
+    請檢查以下選擇的腳位是正確的。
+    若是照著 SlimeVR 的教學來製作追蹤器，預設值應該是正確的
+firmware_tool-board_pins_step-enable_led = 設定 LED
+firmware_tool-board_pins_step-led_pin =
+    .label = LED 腳位
+    .placeholder = 輸入 LED 腳位位址
+firmware_tool-board_pins_step-battery_type = 選擇電池測量電路類型
+firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = 使用外接電阻與板內 ADC 測量（預設）
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = 使用板內低電量警示電路
+firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = 板內電路 + MCP3021
+firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = 使用外接 MCP3021 測量
+firmware_tool-board_pins_step-battery_sensor_pin =
+    .label = 電量偵測腳位
+    .placeholder = 輸入電量偵測腳位位址
+firmware_tool-board_pins_step-battery_resistor =
+    .label = 電池外接串連電阻（歐姆）
+    .placeholder = 輸入用於偵測電量的電阻阻值
+firmware_tool-board_pins_step-battery_shield_resistor-0 =
+    .label = ADC 對地分壓 R1（歐姆）
+    .placeholder = 輸入開發板上 ADC 對地的分壓電阻阻值
+firmware_tool-board_pins_step-battery_shield_resistor-1 =
+    .label = ADC 對輸入分壓 R2（歐姆）
+    .placeholder = 輸入開發板上 ADC 對輸入的分壓電阻阻值
+firmware_tool-add_imus_step = 設定慣性測量單元 (IMU)
+firmware_tool-add_imus_step-description =
+    請加入追蹤器所使用的 IMU
+    若是照著 SlimeVR 的教學來製作追蹤器，預設值應該是正確的
+firmware_tool-add_imus_step-imu_type-label = IMU 類型
+firmware_tool-add_imus_step-imu_type-placeholder = 選擇 IMU 的類型
+firmware_tool-add_imus_step-imu_rotation =
+    .label = IMU 角度（度）
+    .placeholder = IMU 旋轉的角度
+firmware_tool-add_imus_step-scl_pin =
+    .label = SCL 腳位
+    .placeholder = SCL 的腳位位址
+firmware_tool-add_imus_step-sda_pin =
+    .label = SDA 腳位
+    .placeholder = SDA 腳位位址
+firmware_tool-add_imus_step-int_pin =
+    .label = INT 腳位
+    .placeholder = INT 腳位位址
+firmware_tool-add_imus_step-optional_tracker =
+    .label = 選配追蹤器
+firmware_tool-add_imus_step-show_less = 顯示更少
+firmware_tool-add_imus_step-show_more = 顯示更多
+firmware_tool-add_imus_step-add_more = 新增更多 IMU
+firmware_tool-select_firmware_step = 選擇韌體版本
+firmware_tool-select_firmware_step-description = 請選擇要使用的韌體版本
+firmware_tool-select_firmware_step-show-third-party =
+    .label = 顯示第三方韌體
+firmware_tool-flash_method_step = 燒錄方法
+firmware_tool-flash_method_step-description = 選擇要使用的燒錄方法
+firmware_tool-flash_method_step-ota =
+    .label = OTA
+    .description = 透過 OTA（無線更新），追蹤器會透過 Wi-Fi 來更新韌體。僅適用於已燒錄的追蹤器。
+firmware_tool-flash_method_step-serial =
+    .label = 串列埠
+    .description = 透過 USB 傳輸線更新追蹤器。
+firmware_tool-flashbtn_step = 進入燒錄模式
+firmware_tool-flashbtn_step-description = 在進入下一步前，請先進行以下操作
+firmware_tool-flashbtn_step-board_SLIMEVR = 關閉追蹤器電源，移除外殼（若有的話），並用 USB 線連接到這台電腦上，然後根據你持有的 SlimeVR 追蹤器主板的版本，進行下述操作：
+firmware_tool-flashbtn_step-board_SLIMEVR-r11 = 將追蹤器上方第二個 FLASH 方形接點與微控制器的金屬遮罩短路，同時開啟追蹤器開關
+firmware_tool-flashbtn_step-board_SLIMEVR-r12 = 將追蹤器上方的 FLASH 圓形接點與微控制器的金屬遮罩短路，同時開啟追蹤器開關
+firmware_tool-flashbtn_step-board_SLIMEVR-r14 = 按住追蹤器上方的 FLASH 按鈕，同時開啟追蹤器開關
+firmware_tool-flashbtn_step-board_OTHER =
+    在燒錄前，你可能需要將追蹤器切換進 Bootloader（開機載入程式）。
+    多數狀況下，在燒錄開始前按下 BOOT 按鈕即可開始燒錄。
+    如果燒錄進度開始時就已逾時，表示追蹤器未能進入 Bootloader 模式，
+    請參考追蹤器主板燒錄韌體的說明文件，以得知進入 Bootloader 模式的方法。
+firmware_tool-flash_method_ota-devices = 偵測到的 OTA 裝置：
+firmware_tool-flash_method_ota-no_devices = 找不到可以使用 OTA 更新的主板，請確認所選擇的主板類型
+firmware_tool-flash_method_serial-wifi = Wi-Fi 認證資訊：
+firmware_tool-flash_method_serial-devices-label = 偵測到的串列埠裝置：
+firmware_tool-flash_method_serial-devices-placeholder = 選擇一個串列埠裝置
+firmware_tool-flash_method_serial-no_devices = 偵測不到相容的串列埠裝置，請確認追蹤器已連接
+firmware_tool-build_step = 建置中
+firmware_tool-build_step-description = 韌體正在建置中，請稍後
+firmware_tool-flashing_step = 燒錄中
+firmware_tool-flashing_step-description = 追蹤器燒錄中，請遵循畫面上的指示
+firmware_tool-flashing_step-warning-v2 = 除非特別指示，燒錄中請勿移除或是關閉追蹤器，否則可能導致主板無法使用
+firmware_tool-flashing_step-flash_more = 燒錄更多追蹤器
+firmware_tool-flashing_step-exit = 離開
+
+## firmware tool build status
+
+firmware_tool-build-CREATING_BUILD_FOLDER = 正在建立建置資料夾
+firmware_tool-build-DOWNLOADING_FIRMWARE = 正在下載韌體
+firmware_tool-build-EXTRACTING_FIRMWARE = 正在解壓縮韌體
+firmware_tool-build-SETTING_UP_DEFINES = 正在設定韌體參數
+firmware_tool-build-BUILDING = 正在建置韌體
+firmware_tool-build-SAVING = 正在儲存建置
+firmware_tool-build-DONE = 建置完成
+firmware_tool-build-ERROR = 無法建置韌體
+
+## Firmware update status
+
+firmware_update-status-DOWNLOADING = 正在下載韌體
+firmware_update-status-NEED_MANUAL_REBOOT-v2 = 請關閉追蹤器的電源再打開
+firmware_update-status-AUTHENTICATING = 正在與 MCU 認證
+firmware_update-status-UPLOADING = 正在上傳韌體
+firmware_update-status-SYNCING_WITH_MCU = 正在與 MCU 同步
+firmware_update-status-REBOOTING = 正在套用更新
+firmware_update-status-PROVISIONING = 正在設定 Wi-Fi 認證資訊
+firmware_update-status-DONE = 更新完成！
+firmware_update-status-ERROR_DEVICE_NOT_FOUND = 找不到裝置
+firmware_update-status-ERROR_TIMEOUT = 更新流程已逾時
+firmware_update-status-ERROR_DOWNLOAD_FAILED = 無法下載韌體
+firmware_update-status-ERROR_AUTHENTICATION_FAILED = 無法與 MCU 進行認證
+firmware_update-status-ERROR_UPLOAD_FAILED = 無法上傳韌體
+firmware_update-status-ERROR_PROVISIONING_FAILED = 無法設定 Wi-Fi 認證資訊
+firmware_update-status-ERROR_UNSUPPORTED_METHOD = 更新方法不支援
+firmware_update-status-ERROR_UNKNOWN = 發生不明錯誤
+
+## Dedicated Firmware Update Page
+
+firmware_update-title = 韌體更新
+firmware_update-devices = 可用裝置
+firmware_update-devices-description = 請選擇要更新到最新版本 SlimeVR 韌體的追蹤器
+firmware_update-no_devices = 請確認要更新的追蹤器電源已開啟並連接到 Wi-Fi
+firmware_update-changelog-title = 更新到 { $version }
+firmware_update-looking_for_devices = 正在尋找要更新的裝置…
+firmware_update-retry = 重試
+firmware_update-update = 更新所選的追蹤器
+firmware_update-exit = 離開
 
 ## Tray Menu
 
@@ -1096,3 +1515,53 @@ unknown_device-modal-description =
     要將它連接到 SlimeVR 嗎？
 unknown_device-modal-confirm = 好喔！
 unknown_device-modal-forget = 別管它
+# VRChat config warnings
+vrc_config-page-title = VRChat 設定警告
+vrc_config-page-desc = 本頁會顯示 VRChat 的設定並顯示哪些設定與 SlimeVR 不相容。非常建議您根據這裡顯示的警告來修改設定，以獲得最佳的 SlimeVR 使用體驗。
+vrc_config-page-help = 找不到設定在哪裡嗎？
+vrc_config-page-help-desc = 請查閱<a>本主題的相關文件</a>
+vrc_config-page-big_menu = 追蹤 & IK（主選單）
+vrc_config-page-big_menu-desc = 主選單中與 IK （逆向運動學）相關的設定
+vrc_config-page-wrist_menu = 追蹤 & IK（快速選單）
+vrc_config-page-wrist_menu-desc = 快速選單中與 IK （逆向運動學）相關的設定
+vrc_config-on = 開啟
+vrc_config-off = 關閉
+vrc_config-invalid = VRChat 的設定有誤！
+vrc_config-show_more = 顯示更多
+vrc_config-setting_name = VRChat 設定名稱
+vrc_config-recommended_value = 建議設定
+vrc_config-current_value = 目前設定
+vrc_config-mute = 消除警告
+vrc_config-mute-btn = 消除
+vrc_config-unmute-btn = 復歸
+vrc_config-legacy_mode = 使用傳統 IK 解決方案
+vrc_config-disable_shoulder_tracking = 停用肩膀追蹤
+vrc_config-shoulder_width_compensation = 肩寬補償
+vrc_config-spine_mode = FBT 脊椎模式
+vrc_config-tracker_model = FBT 追蹤器形狀
+vrc_config-avatar_measurement_type = 角色測量
+vrc_config-calibration_range = 校正範圍
+vrc_config-calibration_visuals = 顯示 FBT 校正範圍
+vrc_config-user_height = 用戶真實身高
+vrc_config-spine_mode-UNKNOWN = 不明
+vrc_config-spine_mode-LOCK_BOTH = 同時鎖定
+vrc_config-spine_mode-LOCK_HEAD = 鎖定頭部
+vrc_config-spine_mode-LOCK_HIP = 鎖定臀部
+vrc_config-tracker_model-UNKNOWN = 不明
+vrc_config-tracker_model-AXIS = 軸
+vrc_config-tracker_model-BOX = 箱型
+vrc_config-tracker_model-SPHERE = 球型
+vrc_config-tracker_model-SYSTEM = 系統
+vrc_config-avatar_measurement_type-UNKNOWN = 不明
+vrc_config-avatar_measurement_type-HEIGHT = 身高
+vrc_config-avatar_measurement_type-ARM_SPAN = 臂展
+
+## Error collection consent modal
+
+error_collection_modal-title = 我們可以蒐集錯誤資訊嗎？
+error_collection_modal-description_v2 =
+    { settings-interface-behavior-error_tracking-description_v2 }
+    
+    若之後要變更此設定，可以在「詳細設定」頁面中的「行為」來變更。
+error_collection_modal-confirm = 我同意
+error_collection_modal-cancel = 我不想要

gui/src-tauri/69-slimevr-devices.rules

@@ -0,0 +1,42 @@
+# Copyright 2025 Eiren Rain and SlimeVR Contributors
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+## QinHeng
+# CH340
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1A86", ATTRS{idProduct}=="7522", MODE="0660", TAG+="uaccess"
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1A86", ATTRS{idProduct}=="7523", MODE="0660", TAG+="uaccess"
+# CH341
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1A86", ATTRS{idProduct}=="5523", MODE="0660", TAG+="uaccess"
+# CH9102x
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="1A86", ATTRS{idProduct}=="55D4", MODE="0660", TAG+="uaccess"
+
+## Silabs
+# CP210x
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="10C4", ATTRS{idProduct}=="EA60", MODE="0660", TAG+="uaccess"
+
+## Espressif
+# ESP32-C3
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="303A", ATTRS{idProduct}=="1001", MODE="0660", TAG+="uaccess"
+
+## FTDI
+# FT232BM/L/Q, FT245BM/L/Q
+# FT232RL/Q, FT245RL/Q
+# VNC1L with VDPS Firmware
+# VNC2 with FT232Slave
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="0660", TAG+="uaccess"
+
+## SlimeVR
+# smol slime dongle
+SUBSYSTEM=="usb", ATTR{idVendor}=="1209", ATTR{idProduct}=="7690", MODE="0660", TAG+="uaccess"
+KERNEL=="hidraw*", SUBSYSTEM=="hidraw", ATTRS{idVendor}=="1209", ATTRS{idProduct}=="7690", MODE="0660", TAG+="uaccess"

gui/src-tauri/Cargo.toml

@@ -31,7 +31,7 @@ serde = { version = "1", features = ["derive"] }
 tauri = { version = "2.0", features = ["devtools", "tray-icon", "image-png", "rustls-tls"] }
 tauri-runtime = "2.0"
 tauri-plugin-dialog = "2.0"
-tauri-plugin-fs = "2.0"
+tauri-plugin-fs = "2.4.1"
 tauri-plugin-os = "2.0"
 tauri-plugin-shell = "2.0"
 tauri-plugin-store = "2.0"
@@ -54,6 +54,7 @@ dirs-next = "2.0.0"
 discord-sdk = "0.3.6"
 tokio = { version = "1.37.0", features = ["time"] }
 itertools = "0.13.0"
+tauri-plugin-http = "2.5.0"
 
 [target.'cfg(windows)'.dependencies]
 win32job = "1"

gui/src-tauri/capabilities/migrated.json

@@ -2,18 +2,9 @@
   "identifier": "migrated",
   "description": "permissions that were migrated from v1",
   "local": true,
-  "windows": [
-    "main"
-  ],
+  "windows": ["main"],
   "permissions": [
-    "core:path:default",
-    "core:event:default",
-    "core:window:default",
-    "core:app:default",
-    "core:resources:default",
-    "core:menu:default",
-    "core:tray:default",
-    "core:webview:default",
+    "core:default",
     "core:window:allow-close",
     "core:window:allow-toggle-maximize",
     "core:window:allow-minimize",
@@ -21,14 +12,33 @@
     "core:window:allow-hide",
     "core:window:allow-show",
     "core:window:allow-set-focus",
+    "core:window:allow-destroy",
+    "core:window:allow-request-user-attention",
     "core:window:allow-set-decorations",
     "store:default",
     "os:allow-os-type",
+    "os:allow-hostname",
+    "os:allow-locale",
+    "dialog:allow-open",
     "dialog:allow-save",
     "shell:allow-open",
     "store:allow-get",
     "store:allow-set",
     "store:allow-save",
-    "fs:allow-write-text-file"
+    "fs:allow-write-text-file",
+    "fs:allow-read-text-file",
+    "fs:allow-exists",
+    {
+      "identifier": "fs:scope",
+      "allow": [{ "path": "$APPDATA" }, { "path": "$APPDATA/**" }]
+    },
+    {
+      "identifier": "http:default",
+      "allow": [
+        {
+          "url": "https://github.com/SlimeVR/SlimeVR-Tracker-ESP/releases/download/*"
+        }
+      ]
+    }
   ]
 }

gui/src-tauri/dev.slimevr.SlimeVR.desktop

@@ -1,6 +1,6 @@
 [Desktop Entry]
 Version=1.5
-Categories=Game;Development;GTK;
+Categories=Game;GTK;
 Exec={{exec}}
 Icon={{icon}}
 

gui/src-tauri/dev.slimevr.SlimeVR.metainfo.xml

@@ -65,6 +65,22 @@ work.  If not, see <http://creativecommons.org/publicdomain/zero/1.0/>.
   </provides>
 
   <releases>
+    <release version="0.16.2" date="2025-08-01"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.16.2</url></release>
+    <release version="0.16.1" date="2025-07-27"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.16.1</url></release>
+    <release version="0.16.1~rc.2" type="development" date="2025-07-17"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.16.1-rc.2</url></release>
+    <release version="0.16.1~rc.1" type="development" date="2025-07-04"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.16.1-rc.1</url></release>
+    <release version="0.16.0" date="2025-07-01"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.16.0</url></release>
+    <release version="0.16.0~rc.2" type="development" date="2025-06-20"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.16.0-rc.2</url></release>
+    <release version="0.16.0~rc.1" type="development" date="2025-05-27"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.16.0-rc.1</url></release>
+    <release version="0.15.0" date="2025-05-19"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.15.0</url></release>
+    <release version="0.15.0~rc.4" type="development" date="2025-05-12"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.15.0-rc.4</url></release>
+    <release version="0.15.0~rc.3" type="development" date="2025-04-28"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.15.0-rc.3</url></release>
+    <release version="0.15.0~rc.2" type="development" date="2025-04-25"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.15.0-rc.2</url></release>
+    <release version="0.15.0~rc.1" type="development" date="2025-04-23"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.15.0-rc.1</url></release>
+    <release version="0.14.1" date="2025-04-15"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.14.1</url></release>
+    <release version="0.14.0" date="2025-04-10"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.14.0</url></release>
+    <release version="0.14.0~rc.2" type="development" date="2025-03-25"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.14.0-rc.2</url></release>
+    <release version="0.14.0~rc.1" type="development" date="2025-02-12"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.14.0-rc1</url></release>
     <release version="0.13.2" date="2024-11-06"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.13.2</url></release>
     <release version="0.13.1" date="2024-11-05"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.13.1</url></release>
     <release version="0.13.1~rc.3" type="development" date="2024-10-31"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.13.1-rc.3</url></release>