Fix precise wall for Arachne wall generator (#2966 )

Update WIKI for it
Improve PA calibration Line method so it works for bed origin not in (0,0)
2026-04-06 00:32:05 +02:00 · 2023-12-03 09:20:29 +08:00 · 2023-12-02 12:45:02 +08:00 · 2023-12-02 01:47:24 +08:00 · 2023-12-02 01:32:27 +08:00 · 2023-12-02 01:27:58 +08:00
540 changed files with 53699 additions and 41558 deletions
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -4,6 +4,7 @@ on:
    push:
      branches: 
       - main
+       - release/*
      paths:
       - 'src/**'
       - '**/CMakeLists.txt'
@@ -15,6 +16,7 @@ on:
    pull_request:
      branches: 
       - main 
+       - release/*
      paths:
       - 'src/**'
       - '**/CMakeLists.txt'
@@ -224,6 +226,13 @@ jobs:
        with:
          name: OrcaSlicer_Windows_V${{ env.ver }}
          path: ${{ github.workspace }}/build/OrcaSlicer*.exe
+
+      - name: Upload artifacts Win PDB
+        if: matrix.os == 'windows-latest'
+        uses: actions/upload-artifact@v3
+        with:
+          name: OrcaSlicer_Windows_V${{ env.ver }}_pdb
+          path: ${{ github.workspace }}/build/src/Release/*.pdb
 # Ubuntu

      - name: Install dependencies
--- a/.github/workflows/orca_bot.yml
+++ b/.github/workflows/orca_bot.yml
@@ -0,0 +1,26 @@
+name: Orca bot
+on:
+  schedule:
+    - cron: "0 0 * * *"
+
+jobs:
+  close-issues:
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+      pull-requests: write
+    steps:
+      - uses: actions/stale@v5
+        with:
+          days-before-issue-stale: 90
+          days-before-issue-close: 14
+          operations-per-run: 1000
+          stale-issue-label: "stale"
+          ascending: true
+          stale-issue-message: "GitHub bot: this issue is stale because it has been open for 90 days with no activity."
+          close-issue-message: "GitHub bot: This issue was closed because it has been inactive for 14 days since being marked as stale."
+          days-before-pr-stale: -1
+          days-before-pr-close: -1
+          remove-issue-stale-when-updated: true
+          remove-pr-stale-when-updated: true 
+          repo-token: ${{ secrets.GITHUB_TOKEN }}
--- a/README.md
+++ b/README.md
@@ -8,7 +8,7 @@ You can download Orca Slicer here: [github releases page](https://github.com/Sof
 # Main features
 - Auto calibrations for all printers
 - Sandwich(inner-outer-inner) mode - an improved version of the `External perimeters first` mode
- Precise wall
+- [Precise wall](https://github.com/SoftFever/OrcaSlicer/wiki/Precise-wall)
 - Polyholes conversion support [SuperSlicer Wiki: Polyholes](https://github.com/supermerill/SuperSlicer/wiki/Polyholes)
 - Klipper support
 - More granular controls
@@ -83,12 +83,28 @@ Their generous support enables me to purchase filaments and other essential 3D p
 Thank you! :)

 ### Sponsors:  
+<table>
+<tr>
+<td>
 <a href="https://peopoly.net/">
    <img src="SoftFever_doc\sponsor_logos\peopoly-standard-logo.png" alt="Peopoly" width="64" height="">
 </a>
+</td> 
+</tr>
+<tr>
+<td> </td>
+</tr>
+<tr>
+<td>
+<a href="https://qidi3d.com/">
+    <img src="SoftFever_doc\sponsor_logos\QIDI.png" alt="QIDI" width="64" height="">
+</a>
+</td>
+</tr>
+</table>

 ### Backers:  
-*todo: extract ko-fi backers list*
+Ko-fi supporters: [Backers list](https://github.com/SoftFever/OrcaSlicer/wiki/OrcaSlicer-backers-%E2%80%90-28-Oct-2023)

 Support me  
 [![ko-fi](https://ko-fi.com/img/githubbutton_sm.svg)](https://ko-fi.com/G2G5IP3CP)
--- a/SoftFever_doc/sponsor_logos/QIDI.png
+++ b/SoftFever_doc/sponsor_logos/QIDI.png
--- a/doc/Auxiliary-fan.md
+++ b/doc/Auxiliary-fan.md
@@ -1 +1,35 @@
-WIP
+OrcaSlicer use `M106 P2` command to control auxiliary cooling fan.
+
+If you are using Klipper, you can define a `M106` macro to control the both normal part cooling fan and auxiliary fan and exhuast fan.  
+Below is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name to the actual pin name you are using in the configuration*
+
+```
+# instead of using [fan], we define the default part cooling fan with [fan_generic] here
+# this is the default part cooling fan
+[fan_generic fan0]
+pin: PA7
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the auxiliary fan
+# comment out it if you don't have auxiliary fan
+[fan_generic fan2]
+pin: PA8
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the exhaust fan
+# comment out it if you don't have exhaust fan
+[fan_generic fan3]
+pin: PA9
+cycle_time: 0.01
+hardware_pwm: false
+
+[gcode_macro M106]
+gcode:
+    {% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
+    {% set speed = (params.S|int if params.S is defined else 255) %}
+    SET_FAN_SPEED FAN={fan} SPEED={speed}
+
+```
--- a/doc/Chamber-temperature.md
+++ b/doc/Chamber-temperature.md
@@ -1 +1,52 @@
-WIP...
+OrcaSlicer use `M141/M191` command to control active chamber heater.  
+
+If `Activate temperature control` is checked, OrcaSlicer will insert `M191` command at the beginning of the gcode(before `Machine G-code`).  
+![image](./images/activate_chamber_heater.jpg)  
+*Note: If the machine is equipped with an auxiliary fan, OrcaSlicer will automatically activate the fan during the heating period to help circulate air in the chamber.*  
+
+
+There are two chamber temperature variables available that we can use in `Machine G-code` to control the chamber temperature, if you prefer:  
+To access the chamber temperature set in the first filament, use:  
+`M191 S{chamber_temperature[0]}`  
+To use the overall chamber temperature, which is the highest chamber temperature set across all filaments, use:    
+`M191 S{overall_chamber_temperature}`
+
+
+--------------------------Klipper--------------------------  
+If you are using Klipper, you can define these macros to control the active chamber heater.  
+Bellow is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name/values to the actual values you are using in the configuration*
+
+```
+[heater_generic chamber_heater]
+heater_pin:PB10
+max_power:1.0
+# Orca note: here the temperature sensor should be the sensor you are using for chamber temperature, not the PTC sensor
+sensor_type:NTC 100K MGB18-104F39050L32
+sensor_pin:PA1
+control = pid
+pid_Kp = 63.418 
+pid_ki = 0.960
+pid_kd = 1244.716
+min_temp:0
+max_temp:70
+
+[gcode_macro M141]
+gcode:
+    SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={params.S|default(0)}
+
+[gcode_macro M191]
+gcode:
+    {% set s = params.S|float %}
+    {% if s == 0 %}
+        # If target temperature is 0, do nothing
+        M117 Chamber heating cancelled
+    {% else %}
+        SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}
+        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating
+        # M140 S100
+        TEMPERATURE_WAIT SENSOR="heater_generic chamber_heater" MINIMUM={s-1} MAXIMUM={s+1}
+        M117 Chamber at target temperature
+    {% endif %}
+
+```
--- a/doc/Precise-wall.md
+++ b/doc/Precise-wall.md
@@ -0,0 +1,13 @@
+The 'Precise Wall' is a distinctive feature introduced by OrcaSlicer, aimed at improving the dimensional accuracy of prints and minimizing layer inconsistencies by slightly increasing the spacing between the outer wall and the inner wall.
+
+Below is a technical explanation of how this feature works. 
+First, it's important to understand some basic concepts like flow, extrusion width, and space. Slic3r has an excellent document that covers these topics in detail. You can refer to this article: [link to article](https://manual.slic3r.org/advanced/flow-math).
+
+Now, let's dive into the specifics. Slic3r and its forks, such as PrusaSlicer, SuperSlicer, and OrcaSlicer, assume that the extrusion path has an oval shape, which accounts for the overlaps. For example, if we set the wall width to 0.4mm and the layer height to 0.2mm, the combined thickness of two walls laid side by side is 0.714mm instead of 0.8mm due to the overlapping.
+![image](https://github.com/SoftFever/OrcaSlicer/assets/103989404/924d8df8-992c-4d55-b97d-fb85455fab5b)
+This approach enhances the strength of 3D-printed parts. However, it does have some side effects. For instance, when the inner-outer wall order is used, the outer wall can be pushed outside, leading to potential size inaccuracy and more layer inconsistency.
+
+It's important to keep in mind that this approach to handling flow is specific to Slic3r and it's forks. Other slicing software, such as Cura, assumes that the extrusion path is rectangular and, therefore, does not include overlapping. Two 0.4 mm walls will result in a 0.8 mm shell thickness in Cura
+
+OrcaSlicer adheres to Slic3r's approach to handling flow. To address the downsides mentioned earlier, OrcaSlicer introduced the 'Precise Wall' feature. When this feature is enabled in OrcaSlicer, the overlap between the outer wall and its adjacent inner wall is set to zero. This ensures that the overall strength of the printed part is unaffected, while the size accuracy and layer consistency are improved.
+
--- a/doc/Print-settings.md
+++ b/doc/Print-settings.md
@@ -4,4 +4,5 @@ Print settings:
 * [Axiliary fan](auxiliary-fan)
 * [Chamber temperature](chamber-temperature)
 * [Air filtration/Exhaust fan](air-filtration)
-* [Single Extruder Multimaterial](semm)
+* [Single Extruder Multimaterial](semm)
+* [Precise wall](Precise-wall)
--- a/doc/air-filtration.md
+++ b/doc/air-filtration.md
@@ -1 +1,35 @@
-WIP
+OrcaSlicer use `M106 P3` command to control air-filtration/exhuast fan.
+
+If you are using Klipper, you can define a `M106` macro to control the both normal part cooling fan and auxiliary fan and exhuast fan.  
+Below is a reference configuration for Klipper.   
+*Note: Don't forget to change the pin name to the actual pin name you are using in the configuration*
+
+```
+# instead of using [fan], we define the default part cooling fan with [fan_generic] here
+# this is the default part cooling fan
+[fan_generic fan0]
+pin: PA7
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the auxiliary fan
+# comment out it if you don't have auxiliary fan
+[fan_generic fan2]
+pin: PA8
+cycle_time: 0.01
+hardware_pwm: false
+
+# this is the exhaust fan
+# comment out it if you don't have exhaust fan
+[fan_generic fan3]
+pin: PA9
+cycle_time: 0.01
+hardware_pwm: false
+
+[gcode_macro M106]
+gcode:
+    {% set fan = 'fan' + (params.P|int if params.P is defined else 0)|string %}
+    {% set speed = (params.S|int if params.S is defined else 255) %}
+    SET_FAN_SPEED FAN={fan} SPEED={speed}
+
+```
--- a/doc/images/activate_chamber_heater.jpg
+++ b/doc/images/activate_chamber_heater.jpg
--- a/localization/i18n/OrcaSlicer.pot
+++ b/localization/i18n/OrcaSlicer.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -489,27 +489,12 @@ msgstr ""
 msgid "Remove selection"
 msgstr ""

-msgid "Shift + Mouse move up or dowm"
-msgstr ""
-
-msgid "Rotate text"
-msgstr ""
-
-msgid "Text shape"
-msgstr ""
-
 msgid "Font"
 msgstr ""

 msgid "Thickness"
 msgstr ""

-msgid "Input text"
-msgstr ""
-
-msgid "Embeded"
-msgstr ""
-
 msgid "Text Gap"
 msgstr ""

@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr ""

+msgid "Input text"
+msgstr ""
+
 msgid "Surface"
 msgstr ""

 msgid "Horizontal text"
 msgstr ""

+msgid "Shift + Mouse move up or dowm"
+msgstr ""
+
+msgid "Rotate text"
+msgstr ""
+
+msgid "Text shape"
+msgstr ""
+
 msgid "Ctrl+"
 msgstr ""

@@ -608,11 +605,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, possible-c-format, possible-boost-format
 msgid ""
 "%s\n"
@@ -638,6 +630,13 @@ msgstr ""
 msgid "Info"
 msgstr ""

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr ""

@@ -3527,7 +3526,7 @@ msgstr ""

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""

@@ -3638,7 +3637,7 @@ msgid "Failed to parse model infomations."
 msgstr ""

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""

@@ -4325,24 +4324,6 @@ msgstr ""
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""

-#, possible-c-format, possible-boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-
-msgid "You'd better upgrade your software.\n"
-msgstr ""
-
-msgid "Newer 3mf version"
-msgstr ""
-
-#, possible-c-format, possible-boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-
 msgid "Invalid values found in the 3mf:"
 msgstr ""

@@ -4529,7 +4510,7 @@ msgid "Project downloaded %d%%"
 msgstr ""

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -4750,6 +4731,15 @@ msgstr ""
 msgid "Units"
 msgstr ""

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr ""

@@ -4764,6 +4754,12 @@ msgstr ""
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""

+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr ""

@@ -4815,12 +4811,6 @@ msgstr ""
 msgid "If enabled, sets OrcaSlicer as default application to open .step files"
 msgstr ""

-msgid "Online Models"
-msgstr ""
-
-msgid "Show online staff-picked models on the home page"
-msgstr ""
-
 msgid "Maximum recent projects"
 msgstr ""

@@ -5351,7 +5341,7 @@ msgstr ""
 msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr ""

-msgid "The printer is required to be in the same LAN as Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
 msgstr ""

 msgid "The printer does not support sending to printer SD card."
@@ -5760,6 +5750,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr ""

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr ""

@@ -6347,14 +6340,14 @@ msgid "Network plug-in update"
 msgstr ""

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""

 #, possible-c-format, possible-boost-format
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr ""

-msgid "New version of Bambu Studio"
+msgid "New version of Orca Slicer"
 msgstr ""

 msgid "Don't remind me of this version again"
@@ -6367,7 +6360,7 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr ""

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
 msgstr ""

 msgid ""
@@ -7110,6 +7103,15 @@ msgid ""
 "material for bridge, to improve sag"
 msgstr ""

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""

@@ -7381,6 +7383,15 @@ msgid ""
 "shorter bridged distances."
 msgstr ""

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr ""

@@ -7399,6 +7410,14 @@ msgstr ""
 msgid "End G-code when finish the printing of this filament"
 msgstr ""

+msgid "Ensure vertical shell thickness"
+msgstr ""
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+
 msgid "Top surface pattern"
 msgstr ""

@@ -8533,7 +8552,10 @@ msgstr ""
 msgid "Min print speed"
 msgstr ""

-msgid "The minimum printing speed when slow down for cooling"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
 msgstr ""

 msgid "Nozzle diameter"
@@ -8766,22 +8788,6 @@ msgid ""
 "print when travel move. Using spiral line to lift z can prevent stringing"
 msgstr ""

-msgid "Z hop lower boundary"
-msgstr ""
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-
-msgid "Z hop upper boundary"
-msgstr ""
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-
 msgid "Z hop type"
 msgstr ""

@@ -9436,6 +9442,9 @@ msgid ""
 "tool change"
 msgstr ""

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -9731,6 +9740,15 @@ msgid ""
 "itself. It's expressed as a percentage over nozzle diameter"
 msgstr ""

+msgid "Detect narrow internal solid infill"
+msgstr ""
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+
 msgid "invalid value "
 msgstr ""

--- a/localization/i18n/cs/OrcaSlicer_cs.po
+++ b/localization/i18n/cs/OrcaSlicer_cs.po
--- a/localization/i18n/de/OrcaSlicer_de.po
+++ b/localization/i18n/de/OrcaSlicer_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -148,7 +148,7 @@ msgid "Bucket fill"
 msgstr "Flächenfüllung"

 msgid "Height range"
-msgstr "Höhenreichweite"
+msgstr "Höhenbereich"

 msgid "Ctrl + Shift + Enter"
 msgstr "Strg + Umschalt + Eingabetaste"
@@ -163,7 +163,7 @@ msgid "Triangle"
 msgstr "Dreieck"

 msgid "Height Range"
-msgstr "Höhenreichweite"
+msgstr "Höhenbereich"

 msgid "Vertical"
 msgstr "Vertikal"
@@ -494,27 +494,12 @@ msgstr "Naht aufmalen"
 msgid "Remove selection"
 msgstr "Auswahl entfernen"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Umschalttaste + Mausbewegung nach oben oder unten"
-
-msgid "Rotate text"
-msgstr "Text drehen"
-
-msgid "Text shape"
-msgstr "Text zufügen"
-
 msgid "Font"
 msgstr "Schiftart"

 msgid "Thickness"
 msgstr "Dicke"

-msgid "Input text"
-msgstr "Text eingeben"
-
-msgid "Embeded"
-msgstr "Eingebettet"
-
 msgid "Text Gap"
 msgstr "Textabstand"

@@ -528,12 +513,24 @@ msgstr ""
 "Eingebettete\n"
 "Tiefe"

+msgid "Input text"
+msgstr "Text eingeben"
+
 msgid "Surface"
 msgstr "Oberfläche"

 msgid "Horizontal text"
 msgstr "Horizontaler Text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Umschalttaste + Mausbewegung nach oben oder unten"
+
+msgid "Rotate text"
+msgstr "Text drehen"
+
+msgid "Text shape"
+msgstr "Text zufügen"
+
 msgid "Ctrl+"
 msgstr "Strg +"

@@ -627,14 +624,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2-Runtime"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
-"nicht geladen werden. Bitte löschen Sie die Datei und versuchen Sie es "
-"erneut."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -664,6 +653,18 @@ msgstr "Dies ist die neueste Version."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
+"nicht analysiert werden.\n"
+"OrcaSlicer hat versucht, die Konfigurationsdatei neu zu erstellen.\n"
+"Bitte beachten Sie, dass die Anwendungseinstellungen verloren gehen, die "
+"Druckerprofile jedoch nicht betroffen sind."
+
 msgid "Rebuild"
 msgstr "Wiederaufbau"

@@ -3847,11 +3848,11 @@ msgstr "Herunterladen des virtuellen Kameratools"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "Eine weitere virtuelle Kamera wird verwendet.\n"
-"Bambu Studio unterstützt nur eine einzige virtuelle Kamera.\n"
+"Orca Slicer unterstützt nur eine einzige virtuelle Kamera.\n"
 "Möchten Sie diese virtuelle Kamera stoppen?"

 #, c-format, boost-format
@@ -3938,8 +3939,8 @@ msgstr "Laden fehlgeschlagen [%d]"
 msgid "You are going to delete %u file from printer. Are you sure to continue?"
 msgid_plural ""
 "You are going to delete %u files from printer. Are you sure to continue?"
-msgstr[0] ""
-msgstr[1] ""
+msgstr[0] "Sie werden %u Datei vom Drucker löschen. Möchten Sie fortfahren?"
+msgstr[1] "Sie werden %u Dateien vom Drucker löschen. Möchten Sie fortfahren?"

 msgid "Delete files"
 msgstr "Dateien löschen"
@@ -3961,11 +3962,11 @@ msgid "Failed to parse model infomations."
 msgstr "Modellinformationen konnten nicht analysiert werden"

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""
 "Die .gcode.3mf-Datei enthält keine G-Code-Daten. Bitte slicen Sie sie mit "
-"Bambu Studio und exportieren Sie eine neue .gcode.3mf-Datei."
+"Orca Slicer und exportieren Sie eine neue .gcode.3mf-Datei."

 #, c-format, boost-format
 msgid "File '%s' was lost! Please download it again."
@@ -4380,8 +4381,8 @@ msgstr[1] "%1$d Objekte haben gemalte Farben."
 #, c-format, boost-format
 msgid "%1$d object was loaded as a part of cut object."
 msgid_plural "%1$d objects were loaded as parts of cut object"
-msgstr[0] ""
-msgstr[1] ""
+msgstr[0] "%1$d Objekt wurde als Teil des geschnittenen Objekts geladen."
+msgstr[1] "%1$d Objekte wurden als Teile des geschnittenen Objekts geladen."

 msgid "ERROR"
 msgstr "FEHLER"
@@ -4710,28 +4711,6 @@ msgstr ""
 "Die 3mf wurde mit einer alten Version von OrcaSlicer generiert, lade nur die "
 "Geometriedaten."

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"Die Version %s von 3mf ist neuer als die Version %s von %s, folgende "
-"Schlüssel wurden nicht erkannt:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Sie sollten Ihre Software aktualisieren.\n"
-
-msgid "Newer 3mf version"
-msgstr "Neuere 3mf-Version"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Die Version %s der 3mf ist neuer als die Version %s %s. Bitte Ihre Software "
-"aktualisieren."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Ungültige Werte in der 3MF-Datei gefunden:"

@@ -4945,10 +4924,10 @@ msgid "Project downloaded %d%%"
 msgstr "Projekt heruntergeladen %d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""
-"Der Import in Bambu Studio ist fehlgeschlagen. Bitte laden Sie die Datei "
+"Der Import in Orca Slicer ist fehlgeschlagen. Bitte laden Sie die Datei "
 "manuell herunter und importieren Sie sie."

 msgid "The selected file"
@@ -5186,6 +5165,15 @@ msgstr "Imperial"
 msgid "Units"
 msgstr "Einheiten"

+msgid "Home"
+msgstr "Startseite"
+
+msgid "Default Page"
+msgstr "Standardseite"
+
+msgid "Set the page opened on startup."
+msgstr "Legen Sie die Seite fest, die beim Start geöffnet wird."
+
 msgid "Zoom to mouse position"
 msgstr "Zum Mausposition zoomen"

@@ -5202,6 +5190,12 @@ msgstr "Freie Kamera verwenden"
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr "Wenn aktiviert, wird die freie Kamera verwendet."

+msgid "Show splash screen"
+msgstr "Splash-Screen anzeigen"
+
+msgid "Show the splash screen during startup."
+msgstr "Zeige den Splash-Screen beim Start."
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Benachrichtigung \"Tipp des Tages\" nach dem Start anzeigen"

@@ -5260,12 +5254,6 @@ msgstr ""
 "Wenn aktiviert, wird OrcaSlicer als Standardanwendung zum Öffnen von .step-"
 "Dateien festgelegt"

-msgid "Online Models"
-msgstr "Online-Modelle"
-
-msgid "Show online staff-picked models on the home page"
-msgstr "Von Mitarbeitern ausgewählte Online-Models auf der Startseite anzeigen"
-
 msgid "Maximum recent projects"
 msgstr "Höchstanzahl an letzten Projekten"

@@ -5848,8 +5836,8 @@ msgstr ""
 "Bevor Sie die Datei an die SD-Karte des Druckers senden können, muss eine SD-"
 "Karte eingelegt werden."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
-msgstr "Der Drucker muss sich im selben LAN befinden wie Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
+msgstr "Der Drucker muss sich im selben LAN befinden wie Orca Slicer."

 msgid "The printer does not support sending to printer SD card."
 msgstr ""
@@ -6343,6 +6331,9 @@ msgstr "Zeitraffer G-Code"
 msgid "Change filament G-code"
 msgstr "Filamentwechsel G-Code"

+msgid "Change extrusion role G-code"
+msgstr "Ändere den G-Code der Extrusionsart"
+
 msgid "Pause G-code"
 msgstr "Pausen G-Code"

@@ -6969,7 +6960,7 @@ msgid "Network plug-in update"
 msgstr "Aktualisierung des Netzwerk-Plugins"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""
 "Klicken Sie auf OK, um das Netzwerk-Plugin beim nächsten Start von Bambu "
 "Studio zu aktualisieren."
@@ -6979,8 +6970,8 @@ msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr ""
 "Ein neues Netzwerk-Plug-in (%s) verfügbar, möchten Sie es installieren?"

-msgid "New version of Bambu Studio"
-msgstr "Neue Version von Bambu Studio"
+msgid "New version of Orca Slicer"
+msgstr "Neue Version von Orca Slicer"

 msgid "Don't remind me of this version again"
 msgstr "Erinnern Sie mich nicht mehr an diese Version."
@@ -6992,9 +6983,9 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "LAN-Verbindung fehlgeschlagen (Senden einer Druckdatei)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
 msgstr ""
-"Schritt 1: Vergewissern Sie sich, dass Bambu Studio und Ihr Drucker sich im "
+"Schritt 1: Vergewissern Sie sich, dass Orca Slicer und Ihr Drucker sich im "
 "selben LAN befinden."

 msgid ""
@@ -7900,6 +7891,15 @@ msgstr ""
 "Verringern Sie diesen Wert geringfügig (z. B. 0,9), um die Materialmenge für "
 "die Brücke zu verringern und den Durchhang zu minimieren"

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Durchflussverhältnis obere Fläche"

@@ -8237,6 +8237,15 @@ msgstr ""
 "Wenn deaktiviert, sehen Brücken besser aus, sind aber nur für kürzere "
 "Entfernungen zuverlässig."

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Max Überbrückungslänge"

@@ -8258,6 +8267,16 @@ msgstr "End G-Code nach dem fertigstellen des Drucks hinzufügen."
 msgid "End G-code when finish the printing of this filament"
 msgstr "End-G-Code hinzufügen, wenn der Druck dieses Filaments beenden ist."

+msgid "Ensure vertical shell thickness"
+msgstr "Sicherstellung der vertikalen Wanddicke"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die "
+"vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)."
+
 msgid "Top surface pattern"
 msgstr "Muster der Oberfläche"

@@ -9668,10 +9687,14 @@ msgstr ""
 msgid "Min print speed"
 msgstr "Minimale Druckgeschwindigkeit"

-msgid "The minimum printing speed when slow down for cooling"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
 msgstr ""
-"Die minimale Druckgeschwindigkeit wenn diese für eine bessere Kühlung "
-"verringert wird."
+"Die minimale Druckgeschwindigkeit für das Filament, wenn die Verlangsamung "
+"für eine bessere Schichtkühlung aktiviert ist, beim Drucken von Überhängen "
+"und wenn die Funktionen nicht explizit angegeben sind."

 msgid "Nozzle diameter"
 msgstr "Düsendurchmesser"
@@ -9960,26 +9983,6 @@ msgstr ""
 "bei der Verfahrbewegung gegen den Druck stößt. Die Verwendung einer "
 "Spirallinie zum Anheben von z kann Fadenbildung verhindern."

-msgid "Z hop lower boundary"
-msgstr "Z-Hub untere Grenze"
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-"Z-Hub wird nur wirksam, wenn Z über diesem Wert liegt und unter dem "
-"Parameter: \"Z-Hub obere Grenze\" liegt"
-
-msgid "Z hop upper boundary"
-msgstr "Z-Hub obere Grenze"
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-"Wenn dieser Wert positiv ist, wird der Z-Hub nur wirksam, wenn Z über dem "
-"Parameter: \"Z-Hub untere Grenze\" liegt und unter diesem Wert liegt"
-
 msgid "Z hop type"
 msgstr "Z-Hub Typ"

@@ -10356,7 +10359,7 @@ msgid "Close holes"
 msgstr "Löcher schließen"

 msgid "Z offset"
-msgstr ""
+msgstr "Z-Offset"

 msgid ""
 "This value will be added (or subtracted) from all the Z coordinates in the "
@@ -10364,6 +10367,11 @@ msgid ""
 "example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
+"Dieser Wert wird zu allen Z-Koordinaten im Ausgabe-G-Code addiert (oder "
+"subtrahiert). Er wird verwendet, um die schlechte Z-Endschalterposition zu "
+"kompensieren: Wenn Ihr Endschalter-Nullpunkt tatsächlich die Düse 0,3 mm vom "
+"Druckbett entfernt lässt, setzen Sie diesen Wert auf -0,3 (oder korrigieren "
+"Sie Ihren Endschalter)."

 msgid "Enable support"
 msgstr "Stützstrukturen aktivieren"
@@ -10796,6 +10804,9 @@ msgstr ""
 "Dieser G-Code wird beim Filamentwechsel eingefügt, einschließlich des T-"
 "Befehls zum Auslösen des Werkzeugwechsels"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "Dieser G-Code wird beim Wechsel der Extrusionsart eingefügt"
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -11196,6 +11207,19 @@ msgstr ""
 "Dicke des Features, wird die Wand so dick wie das Feature selbst. Wird als "
 "Prozentsatz des Düsendurchmessers angegeben."

+msgid "Detect narrow internal solid infill"
+msgstr "Erkennen einer schmalen internen soliden Füllung"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Mit dieser Option wird ein schmaler innerer Füllbereich automatisch erkannt. "
+"Wenn diese Option aktiviert ist, wird ein konzentrisches Muster für den "
+"Bereich verwendet, um den Druck zu beschleunigen. Andernfalls wird "
+"standardmäßig ein geradliniges Muster verwendet."
+
 msgid "invalid value "
 msgstr "Ungültiger Wert"

@@ -12702,6 +12726,71 @@ msgstr ""
 "höherer Gehäusetemperatur verringern. Weitere Informationen dazu finden Sie "
 "in der Wiki."

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "Die Version %s von 3mf ist neuer als die Version %s von %s, folgende "
+#~ "Schlüssel wurden nicht erkannt:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Sie sollten Ihre Software aktualisieren.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Neuere 3mf-Version"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Die Version %s der 3mf ist neuer als die Version %s %s. Bitte Ihre "
+#~ "Software aktualisieren."
+
+#~ msgid "Embeded"
+#~ msgstr "Eingebettet"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Die OrcaSlicer-Konfigurationsdatei ist möglicherweise beschädigt und kann "
+#~ "nicht geladen werden. Bitte löschen Sie die Datei und versuchen Sie es "
+#~ "erneut."
+
+#~ msgid "Online Models"
+#~ msgstr "Online-Modelle"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr ""
+#~ "Von Mitarbeitern ausgewählte Online-Models auf der Startseite anzeigen"
+
+#~ msgid "Z hop lower boundary"
+#~ msgstr "Z-Hub untere Grenze"
+
+#~ msgid ""
+#~ "Z hop will only come into effect when Z is above this value and is below "
+#~ "the parameter: \"Z hop upper boundary\""
+#~ msgstr ""
+#~ "Z-Hub wird nur wirksam, wenn Z über diesem Wert liegt und unter dem "
+#~ "Parameter: \"Z-Hub obere Grenze\" liegt"
+
+#~ msgid "Z hop upper boundary"
+#~ msgstr "Z-Hub obere Grenze"
+
+#~ msgid ""
+#~ "If this value is positive, Z hop will only come into effect when Z is "
+#~ "above the parameter: \"Z hop lower boundary\" and is below this value"
+#~ msgstr ""
+#~ "Wenn dieser Wert positiv ist, wird der Z-Hub nur wirksam, wenn Z über dem "
+#~ "Parameter: \"Z-Hub untere Grenze\" liegt und unter diesem Wert liegt"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr ""
+#~ "Die minimale Druckgeschwindigkeit wenn diese für eine bessere Kühlung "
+#~ "verringert wird."
+
 #~ msgid ""
 #~ "There are currently no identical spare consumables available, and "
 #~ "automatic replenishment is currently not possible. \n"
@@ -12727,16 +12816,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "Aktivieren Sie die Luftfilterung für eine bessere Luftfiltration"

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Sicherstellung der vertikalen Wanddicke"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "In der Nähe von schrägen Flächen massive Füllungen hinzufügen, um die "
-#~ "vertikale Wanddicke zu gewährleisten (obere + untere massive Schichten)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Verglasungstemperatur"

@@ -12772,19 +12851,6 @@ msgstr ""
 #~ "läuft während des Drucks mit dieser Geschwindigkeit, mit Ausnahme der "
 #~ "ersten Schichten, für die keine Kühlung vorgesehen ist."

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Erkennen einer schmalen internen soliden Füllung"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Mit dieser Option wird ein schmaler innerer Füllbereich automatisch "
-#~ "erkannt. Wenn diese Option aktiviert ist, wird ein konzentrisches Muster "
-#~ "für den Bereich verwendet, um den Druck zu beschleunigen. Andernfalls "
-#~ "wird standardmäßig ein geradliniges Muster verwendet."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"
--- a/localization/i18n/en/OrcaSlicer_en.po
+++ b/localization/i18n/en/OrcaSlicer_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -11,7 +11,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
-"X-Generator: Poedit 3.3.2\n"
+"X-Generator: Poedit 3.4.1\n"

 msgid "Supports Painting"
 msgstr "Support Painting"
@@ -491,27 +491,12 @@ msgstr "Seam painting"
 msgid "Remove selection"
 msgstr "Remove selection"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "Text shape"
-
 msgid "Font"
 msgstr "Font"

 msgid "Thickness"
 msgstr "Thickness"

-msgid "Input text"
-msgstr "Input text"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"

@@ -523,12 +508,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"

+msgid "Input text"
+msgstr "Input text"
+
 msgid "Surface"
 msgstr "Surface"

 msgid "Horizontal text"
 msgstr "Horizontal text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "Text shape"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -612,11 +609,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -644,6 +636,13 @@ msgstr "This is the newest version."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Rebuild"

@@ -3700,11 +3699,11 @@ msgstr "Downloading Virtual Camera Tools"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"

 #, c-format, boost-format
@@ -3814,7 +3813,7 @@ msgid "Failed to parse model infomations."
 msgstr "Failed to parse model infomation"

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""

@@ -4081,7 +4080,7 @@ msgid "Upload failed\n"
 msgstr ""

 msgid "obtaining instance_id failed\n"
-msgstr ""
+msgstr "Obtaining instance_id failed\n"

 msgid ""
 "Your comment result cannot be uploaded due to some reasons. As follows:\n"
@@ -4520,28 +4519,6 @@ msgstr "The Config cannot be loaded."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "You should update your software.\n"
-
-msgid "Newer 3mf version"
-msgstr "Newer 3mf version"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Invalid values found in the 3mf:"

@@ -4661,7 +4638,7 @@ msgid "Please select a file"
 msgstr "Please select a file"

 msgid "Do you want to replace it"
-msgstr ""
+msgstr "Do you want to replace it?"

 msgid "Message"
 msgstr ""
@@ -4744,7 +4721,7 @@ msgid "Project downloaded %d%%"
 msgstr "Project downloaded %d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -4976,6 +4953,15 @@ msgstr "Imperial"
 msgid "Units"
 msgstr "Units"

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr "Zoom to mouse position"

@@ -4992,6 +4978,12 @@ msgstr ""
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""

+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Show \"Tip of the day\" notification after start"

@@ -5049,12 +5041,6 @@ msgstr ""
 "If enabled, this sets Orca Slicer as the default application to open .step "
 "files."

-msgid "Online Models"
-msgstr "Online Models"
-
-msgid "Show online staff-picked models on the home page"
-msgstr "Show online staff-picked models on the home page"
-
 msgid "Maximum recent projects"
 msgstr "Maximum recent projects"

@@ -5611,8 +5597,8 @@ msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr ""
 "A MicroSD card needs to be inserted before sending to the printer SD card."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
-msgstr "The printer is required to be on the same LAN as Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
+msgstr "The printer is required to be on the same LAN as Orca Slicer."

 msgid "The printer does not support sending to printer SD card."
 msgstr "The printer does not support sending to printer MicroSD card."
@@ -6079,6 +6065,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Change filament G-code"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Pause G-code"

@@ -6688,16 +6677,16 @@ msgid "Network plug-in update"
 msgstr "Network plug-in update"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""
-"Click OK to update the Network plug-in the next time Bambu Studio launches."
+"Click OK to update the Network plug-in the next time Orca Slicer launches."

 #, c-format, boost-format
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr "A new network plug-in (%s) is available. Do you want to install it?"

-msgid "New version of Bambu Studio"
-msgstr "New version of Bambu Studio"
+msgid "New version of Orca Slicer"
+msgstr "New version of Orca Slicer"

 msgid "Don't remind me of this version again"
 msgstr "Don't remind me about this version again."
@@ -6709,10 +6698,9 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "LAN Connection Failed (Sending print file)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
 msgstr ""
-"Step 1, please confirm that Bambu Studio and your printer are on the same "
-"LAN."
+"Step 1, please confirm that Orca Slicer and your printer are on the same LAN."

 msgid ""
 "Step 2, if the IP and Access Code below are different from the actual values "
@@ -6786,7 +6774,7 @@ msgid ""
 msgstr ""
 "The firmware version is abnormal. Repairing and updating are required before "
 "printing. Do you want to update now? You can also update later on the "
-"printer or update next time you start Bambu Studio."
+"printer or update next time you start Orca Slicer."

 msgid "Extension Board"
 msgstr "Extension Board"
@@ -7558,6 +7546,15 @@ msgstr ""
 "Decrease this value slightly (for example 0.9) to reduce the amount of "
 "material extruded for bridges to avoid sagging."

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""

@@ -7853,6 +7850,15 @@ msgstr ""
 "may look worse. If disabled, bridges look better but are reliable only for "
 "shorter distances."

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Max bridge length"

@@ -7874,6 +7880,16 @@ msgstr "Add end G-Code when finishing the entire print."
 msgid "End G-code when finish the printing of this filament"
 msgstr "Add end G-code when finishing the printing of this filament."

+msgid "Ensure vertical shell thickness"
+msgstr "Ensure vertical shell thickness"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+
 msgid "Top surface pattern"
 msgstr "Top surface pattern"

@@ -9092,8 +9108,11 @@ msgstr ""
 msgid "Min print speed"
 msgstr "Min print speed"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "The minimum printing speed when slowing down for cooling."
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""

 msgid "Nozzle diameter"
 msgstr "Nozzle diameter"
@@ -9350,22 +9369,6 @@ msgstr ""
 "hitting the print when traveling more. Using spiral lines to lift z can "
 "prevent stringing."

-msgid "Z hop lower boundary"
-msgstr ""
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-
-msgid "Z hop upper boundary"
-msgstr ""
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-
 msgid "Z hop type"
 msgstr ""

@@ -9709,21 +9712,21 @@ msgid ""
 "normal(manual) or tree(manual) is selected, only support enforcers are "
 "generated"
 msgstr ""
-"normal(auto) and tree(auto) are used to generate support automatically. If "
+"Normal(auto) and Tree(auto) are used to generate support automatically. If "
 "normal(manual) or tree(manual) is selected, only support enforcers are "
 "generated"

 msgid "normal(auto)"
-msgstr "normal(auto)"
+msgstr "Normal(auto)"

 msgid "tree(auto)"
-msgstr "tree(auto)"
+msgstr "Tree(auto)"

 msgid "normal(manual)"
-msgstr "normal(manual)"
+msgstr "Normal(manual)"

 msgid "tree(manual)"
-msgstr "tree(manual)"
+msgstr "Tree(manual)"

 msgid "Support/object xy distance"
 msgstr "Support/object xy distance"
@@ -10077,6 +10080,9 @@ msgstr ""
 "This G-code is inserted when filament is changed, including T commands to "
 "trigger tool change."

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10437,6 +10443,18 @@ msgstr ""
 "thickness of the feature, the wall will become as thick as the feature "
 "itself. It's expressed as a percentage over nozzle diameter"

+msgid "Detect narrow internal solid infill"
+msgstr "Detect narrow internal solid infill"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"This option will auto-detect narrow internal solid infill areas. If enabled, "
+"the concentric pattern will be used for the area to speed up printing. "
+"Otherwise, the rectilinear pattern will be used by default."
+
 msgid "invalid value "
 msgstr "invalid value "

@@ -11696,6 +11714,40 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "You should update your software.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Newer 3mf version"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
+#~ msgid "Online Models"
+#~ msgstr "Online Models"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr "Show online staff-picked models on the home page"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr "The minimum printing speed when slowing down for cooling."
+
 #~ msgid ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clog."
@@ -11703,16 +11755,6 @@ msgstr ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clogs."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Ensure vertical shell thickness"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperature of vitrification"

@@ -11735,18 +11777,6 @@ msgstr ""
 #~ "run at this speed during printing except for during the first several "
 #~ "layers which may be set to have no part cooling."

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detect narrow internal solid infill"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "This option will auto-detect narrow internal solid infill areas. If "
-#~ "enabled, the concentric pattern will be used for the area to speed up "
-#~ "printing. Otherwise, the rectilinear pattern will be used by default."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Empty layers around bottom are replaced by nearest normal layers."

--- a/localization/i18n/es/OrcaSlicer_es.po
+++ b/localization/i18n/es/OrcaSlicer_es.po
--- a/localization/i18n/fr/OrcaSlicer_fr.po
+++ b/localization/i18n/fr/OrcaSlicer_fr.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril\n"
@@ -498,27 +498,12 @@ msgstr "Peindre la couture"
 msgid "Remove selection"
 msgstr "Supprimer la sélection"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Déplacement de la souris vers le haut ou le bas"
-
-msgid "Rotate text"
-msgstr "Rotation du texte"
-
-msgid "Text shape"
-msgstr "Forme du texte"
-
 msgid "Font"
 msgstr "Police"

 msgid "Thickness"
 msgstr "Épaisseur"

-msgid "Input text"
-msgstr "Texte"
-
-msgid "Embeded"
-msgstr "Intégré"
-
 msgid "Text Gap"
 msgstr "Espacement du texte"

@@ -532,12 +517,24 @@ msgstr ""
 "Profondeur\n"
 "intégrée"

+msgid "Input text"
+msgstr "Texte"
+
 msgid "Surface"
 msgstr "Surface"

 msgid "Horizontal text"
 msgstr "Texte horizontal"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Déplacement de la souris vers le haut ou le bas"
+
+msgid "Rotate text"
+msgstr "Rotation du texte"
+
+msgid "Text shape"
+msgstr "Forme du texte"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -626,20 +623,13 @@ msgid ""
 "features.\n"
 "Click Yes to install it now."
 msgstr ""
-"Orca Slicer nécessite le Microsoft WebView2 Runtime pour faire fonctionner"
-"certaines fonctionnalités.\n"
+"Orca Slicer nécessite le Microsoft WebView2 Runtime pour faire "
+"fonctionnercertaines fonctionnalités.\n"
 "Cliquez sur Oui pour l'installer maintenant."

 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Le fichier de configuration de Orca Slicer est peut-être corrompu et ne peut "
-"pas être analysé. Veuillez supprimer le fichier et réessayer."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -667,6 +657,13 @@ msgstr "Il s'agit de la version la plus récente."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Reconstruire"

@@ -1803,7 +1800,8 @@ msgstr ""

 #, c-format, boost-format
 msgid "Successfully sent. Will automatically jump to the next page in %ss"
-msgstr "Envoyé avec succès. Passera automatiquement à la page suivante dans %ss"
+msgstr ""
+"Envoyé avec succès. Passera automatiquement à la page suivante dans %ss"

 msgid "An SD card needs to be inserted before printing via LAN."
 msgstr "Une carte SD doit être insérée avant l'impression via le réseau local."
@@ -2202,13 +2200,14 @@ msgid "Group"
 msgstr "Groupe"

 msgid "The printer does not currently support auto refill."
-msgstr "L'imprimante ne prend pas actuellement en charge la recharge automatique."
+msgstr ""
+"L'imprimante ne prend pas actuellement en charge la recharge automatique."

 msgid ""
 "AMS filament backup is not enabled, please enable it in the AMS settings."
 msgstr ""
-"La sauvegarde du filament AMS n'est pas activée, "
-"veuillez l'activer dans les paramètres AMS."
+"La sauvegarde du filament AMS n'est pas activée, veuillez l'activer dans les "
+"paramètres AMS."

 msgid ""
 "If there are two identical filaments in AMS, AMS filament backup will be "
@@ -2216,10 +2215,11 @@ msgid ""
 "(Currently supporting automatic supply of consumables with the same brand, "
 "material type, and color)"
 msgstr ""
-"S'il y a deux filaments identiques dans l'AMS, la sauvegarde des filaments AMS sera "
-" activée. \n"
-"(Prend actuellement en charge l'approvisionnement automatique en consommables de la même "
-"marque, du même type de matériau et de la même couleur)"
+"S'il y a deux filaments identiques dans l'AMS, la sauvegarde des filaments "
+"AMS sera  activée. \n"
+"(Prend actuellement en charge l'approvisionnement automatique en "
+"consommables de la même marque, du même type de matériau et de la même "
+"couleur)"

 msgid "AMS Settings"
 msgstr "Paramètres de l’AMS"
@@ -2803,13 +2803,15 @@ msgstr "Échec du démarrage de la tâche d'impression"
 msgid ""
 "This calibration does not support the currently selected nozzle diameter"
 msgstr ""
-"Cet étalonnage ne prend pas en charge le diamètre de buse actuellement sélectionné."
+"Cet étalonnage ne prend pas en charge le diamètre de buse actuellement "
+"sélectionné."

 msgid "Current flowrate cali param is invalid"
 msgstr "Le paramètre cali du débit actuel n'est pas valide"

 msgid "Selected diameter and machine diameter do not match"
-msgstr "Le diamètre sélectionné et le diamètre de la machine ne correspondent pas"
+msgstr ""
+"Le diamètre sélectionné et le diamètre de la machine ne correspondent pas"

 msgid "Failed to generate cali gcode"
 msgstr "Échec de la génération du code cali"
@@ -3777,7 +3779,9 @@ msgid "Loading..."
 msgstr "Chargement..."

 msgid "Initialize failed (Not supported on the current printer version)!"
-msgstr "Échec de l'initialisation (non pris en charge par la version actuelle de l'imprimante) !"
+msgstr ""
+"Échec de l'initialisation (non pris en charge par la version actuelle de "
+"l'imprimante) !"

 msgid "Initialize failed (Not accessible in LAN-only mode)!"
 msgstr "Échec de l'initialisation (non accessible en mode LAN uniquement) !"
@@ -3818,11 +3822,11 @@ msgstr "Téléchargement de Virtual Camera Tools"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "Une autre caméra virtuelle est en cours d'exécution.\n"
-"Bambu Studio ne prend en charge qu'une seule caméra virtuelle.\n"
+"Orca Slicer ne prend en charge qu'une seule caméra virtuelle.\n"
 "Voulez-vous arrêter cette caméra virtuelle ?"

 #, c-format, boost-format
@@ -3933,7 +3937,7 @@ msgid "Failed to parse model infomations."
 msgstr "Impossible d'analyser les informations du modèle"

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""

@@ -4614,9 +4618,9 @@ msgid ""
 "clogged when printing this filament in a closed enclosure. Please open the "
 "front door and/or remove the upper glass."
 msgstr ""
-"La température actuelle du lit chauffant est relativement élevée. La buse peut être "
-"obstruée lors de l'impression de ce filament dans une enceinte fermée. Veuillez ouvrir la "
-"porte avant et/ou retirez la vitre supérieure."
+"La température actuelle du lit chauffant est relativement élevée. La buse "
+"peut être obstruée lors de l'impression de ce filament dans une enceinte "
+"fermée. Veuillez ouvrir la porte avant et/ou retirez la vitre supérieure."

 msgid ""
 "The nozzle hardness required by the filament is higher than the default "
@@ -4652,28 +4656,6 @@ msgstr ""
 "Le fichier 3mf a été généré par une ancienne version de Orca Slicer, "
 "chargement des données de géométrie uniquement."

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"La version %s de 3mf est plus récente que la version %s de %s, clés "
-"suivantes non reconnues :"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Il est préférable de mettre à jour votre logiciel.\n"
-
-msgid "Newer 3mf version"
-msgstr "Nouvelle version 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"La version %s de 3mf est plus récente que la version %s de %s, nous vous "
-"suggérons de mettre à jour votre logiciel."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Valeurs non valides trouvées dans le 3mf :"

@@ -4887,7 +4869,7 @@ msgid "Project downloaded %d%%"
 msgstr "Projet téléchargé %d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -4954,7 +4936,9 @@ msgid "The provided file name is not valid."
 msgstr ""

 msgid "The following characters are not allowed by a FAT file system:"
-msgstr "Les caractères suivants ne sont pas autorisés par un système de fichiers FAT :"
+msgstr ""
+"Les caractères suivants ne sont pas autorisés par un système de fichiers "
+"FAT :"

 msgid "Save Sliced file as:"
 msgstr "Enregistrer le fichier découpé sous :"
@@ -4975,7 +4959,9 @@ msgstr ""
 "Seules les parties positives seront exportées."

 msgid "Is the printer ready? Is the print sheet in place, empty and clean?"
-msgstr "L'imprimante est-elle prête ? La feuille d'impression est-elle en place, vide et propre ?"
+msgstr ""
+"L'imprimante est-elle prête ? La feuille d'impression est-elle en place, "
+"vide et propre ?"

 msgid "Upload and Print"
 msgstr "Télécharger et imprimer"
@@ -5127,6 +5113,15 @@ msgstr "Impérial"
 msgid "Units"
 msgstr "Unités"

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr "Zoom à la position de la souris"

@@ -5142,8 +5137,14 @@ msgstr "Utiliser une caméra disponible"

 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""
-"Si cette option est activée, la caméra libre est utilisée. "
-"Si cette option n'est pas activée, la caméra contrainte est utilisée."
+"Si cette option est activée, la caméra libre est utilisée. Si cette option "
+"n'est pas activée, la caméra contrainte est utilisée."
+
+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""

 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Afficher la notification \"Astuce du jour\" au démarrage"
@@ -5204,13 +5205,6 @@ msgstr ""
 "Si activé, définit Orca Slicer comme application par défaut pour ouvrir les "
 "fichiers .step/.stp"

-msgid "Online Models"
-msgstr "Modèles en ligne"
-
-msgid "Show online staff-picked models on the home page"
-msgstr ""
-"Afficher les modèles en ligne sélectionnés par le staff sur la page d'accueil"
-
 msgid "Maximum recent projects"
 msgstr "Projets récents maximum"

@@ -5756,7 +5750,8 @@ msgstr ""
 msgid ""
 "Connecting to the printer. Unable to cancel during the connection process."
 msgstr ""
-"Connexion à l'imprimante. Impossible d'annuler pendant le processus de connexion."
+"Connexion à l'imprimante. Impossible d'annuler pendant le processus de "
+"connexion."

 msgid "Preparing print job"
 msgstr "Préparation de la tâche d'impression"
@@ -5790,9 +5785,8 @@ msgstr ""
 msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr "Une carte SD doit être insérée avant l'envoi à l'imprimante."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
-msgstr ""
-"L'imprimante doit se trouver sur le même réseau local que Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
+msgstr "L'imprimante doit se trouver sur le même réseau local que Orca Slicer."

 msgid "The printer does not support sending to printer SD card."
 msgstr ""
@@ -6248,7 +6242,8 @@ msgid "Wipe tower parameters"
 msgstr "Paramètres de la tour de nettoyage"

 msgid "Toolchange parameters with single extruder MM printers"
-msgstr "Paramètres de changement d'outil avec les imprimantes MM à extrudeur unique"
+msgstr ""
+"Paramètres de changement d'outil avec les imprimantes MM à extrudeur unique"

 msgid "Ramming settings"
 msgstr ""
@@ -6292,6 +6287,9 @@ msgstr "G-code de Time lapse"
 msgid "Change filament G-code"
 msgstr "G-code de changement de filament"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-code de mise en pause"

@@ -6921,18 +6919,18 @@ msgid "Network plug-in update"
 msgstr "Mise à jour du plug-in réseau"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""
 "Cliquez sur OK pour mettre à jour le plug-in réseau lors du prochain "
-"lancement de Bambu Studio."
+"lancement de Orca Slicer."

 #, c-format, boost-format
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr ""
 "Un nouveau plug-in réseau (%s) est disponible, voulez-vous l'installer ?"

-msgid "New version of Bambu Studio"
-msgstr "Nouvelle version de Bambu Studio"
+msgid "New version of Orca Slicer"
+msgstr "Nouvelle version de Orca Slicer"

 msgid "Don't remind me of this version again"
 msgstr "Ne plus me rappeler cette version"
@@ -6944,9 +6942,9 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "Échec de la connexion LAN (envoi du fichier d’impression)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
 msgstr ""
-"Étape 1, confirmez que Bambu Studio et votre imprimante se trouvent sur le "
+"Étape 1, confirmez que Orca Slicer et votre imprimante se trouvent sur le "
 "même réseau local."

 msgid ""
@@ -7364,8 +7362,8 @@ msgstr ""

 msgid "Variable layer height is not supported with Organic supports."
 msgstr ""
-"La hauteur variable des couches n'est pas prise en "
-"charge par les supports organiques."
+"La hauteur variable des couches n'est pas prise en charge par les supports "
+"organiques."

 msgid "The prime tower is not supported in \"By object\" print."
 msgstr ""
@@ -7520,10 +7518,10 @@ msgid ""
 "the next layers will be linearly shrunk less, up to the layer indicated by "
 "this value."
 msgstr ""
-"Le nombre de couches sur lesquelles la compensation du pied d'éléphant sera active. "
-"La première couche sera rétrécie de la valeur de la compensation du pied d'éléphant, puis "
-"les couches suivantes seront réduites de façon linéaire, jusqu'à la couche indiquée par "
-"cette valeur."
+"Le nombre de couches sur lesquelles la compensation du pied d'éléphant sera "
+"active. La première couche sera rétrécie de la valeur de la compensation du "
+"pied d'éléphant, puis les couches suivantes seront réduites de façon "
+"linéaire, jusqu'à la couche indiquée par cette valeur."

 msgid "layers"
 msgstr "couches"
@@ -7833,6 +7831,15 @@ msgstr ""
 "Diminuez légèrement cette valeur (par exemple 0.9) pour réduire la quantité "
 "de matériaux pour le pont, pour améliorer l'affaissement"

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Débit des surfaces supérieures"

@@ -7904,8 +7911,8 @@ msgid ""
 "Create additional perimeter paths over steep overhangs and areas where "
 "bridges cannot be anchored. "
 msgstr ""
-"Créer des chemins périmétriques supplémentaires au-dessus des surplombs abrupts et des zones où les "
-"les ponts ne peuvent pas être ancrés. "
+"Créer des chemins périmétriques supplémentaires au-dessus des surplombs "
+"abrupts et des zones où les les ponts ne peuvent pas être ancrés. "

 msgid "Reverse on odd"
 msgstr "Inversé sur impair"
@@ -8094,7 +8101,9 @@ msgid "Activate air filtration"
 msgstr "Activer la filtration de l'air"

 msgid "Activate for better air filtration. G-code command: M106 P3 S(0-255)"
-msgstr "Activer pour une meilleure filtration de l'air. Commande du code G : M106 P3 S(0-255)"
+msgstr ""
+"Activer pour une meilleure filtration de l'air. Commande du code G : M106 P3 "
+"S(0-255)"

 msgid "Fan speed"
 msgstr "Vitesse du ventilateur"
@@ -8103,9 +8112,8 @@ msgid ""
 "Speed of exhuast fan during printing.This speed will overwrite the speed in "
 "filament custom gcode"
 msgstr ""
-"Vitesse du ventilateur d'extraction pendant l'impression. "
-"Cette vitesse remplacera la vitesse dans "
-"gcode de filament personnalisé"
+"Vitesse du ventilateur d'extraction pendant l'impression. Cette vitesse "
+"remplacera la vitesse dans gcode de filament personnalisé"

 msgid "Speed of exhuast fan after printing completes"
 msgstr "Vitesse du ventilateur d'extraction après la fin de l'impression"
@@ -8145,6 +8153,15 @@ msgstr ""
 "les ponts ont une meilleure apparence mais ne sont fiables que pour des "
 "distances plus courtes."

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Longueur maximale des ponts"

@@ -8166,6 +8183,16 @@ msgstr "G-code lorsque l'ensemble de l'impression est terminée"
 msgid "End G-code when finish the printing of this filament"
 msgstr "G-code lorsque l'impression de ce filament est terminée"

+msgid "Ensure vertical shell thickness"
+msgstr "Veiller à l'épaisseur verticale de la coque"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Ajouter un remplissage solide près des surfaces en pente pour garantir "
+"l'épaisseur verticale de la coque (couches solides supérieures + inférieures)"
+
 msgid "Top surface pattern"
 msgstr "Motif des surfaces supérieures"

@@ -8341,8 +8368,7 @@ msgid ""
 "it will be computed over the nozzle diameter."
 msgstr ""
 "Largeur de ligne par défaut si les autres largeurs de ligne sont fixées à 0. "
-"Si elle est exprimée en %, "
-"elle sera calculée sur le diamètre de la buse."
+"Si elle est exprimée en %, elle sera calculée sur le diamètre de la buse."

 msgid "Keep fan always on"
 msgstr "Ventilateur toujours actif"
@@ -8495,7 +8521,9 @@ msgid "Speed of the first cooling move"
 msgstr "Vitesse du premier mouvement de refroidissement"

 msgid "Cooling moves are gradually accelerating beginning at this speed."
-msgstr "Les mouvements de refroidissement s'accélèrent progressivement à partir de cette vitesse."
+msgstr ""
+"Les mouvements de refroidissement s'accélèrent progressivement à partir de "
+"cette vitesse."

 msgid "Minimal purge on wipe tower"
 msgstr "Purge minimale sur la tour d’essuyage"
@@ -8518,7 +8546,9 @@ msgid "Speed of the last cooling move"
 msgstr "Vitesse du dernier mouvement de refroidissement"

 msgid "Cooling moves are gradually accelerating towards this speed."
-msgstr "Les mouvements de refroidissement s'accélèrent progressivement vers cette vitesse."
+msgstr ""
+"Les mouvements de refroidissement s'accélèrent progressivement vers cette "
+"vitesse."

 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
@@ -8799,8 +8829,7 @@ msgstr "Ajuster l’accélération à la décélération"
 #, c-format, boost-format
 msgid ""
 "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration"
-msgstr ""
-"Le max_accel_to_decel de Klipper sera ajusté à ce %% d'accélération."
+msgstr "Le max_accel_to_decel de Klipper sera ajusté à ce %% d'accélération."

 #, c-format, boost-format
 msgid "%%"
@@ -9046,7 +9075,9 @@ msgid "Best object position"
 msgstr "Meilleure position de l'objet"

 msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
-msgstr "Meilleure position de rangement automatique dans l'intervalle [0,1] par rapport à la forme du lit."
+msgstr ""
+"Meilleure position de rangement automatique dans l'intervalle [0,1] par "
+"rapport à la forme du lit."

 msgid ""
 "Enable this option if machine has auxiliary part cooling fan. G-code "
@@ -9271,8 +9302,8 @@ msgid ""
 "The angle ironing is done at. A negative number disables this function and "
 "uses the default method."
 msgstr ""
-"Angle auquel le repassage des angles se fait. Un nombre négatif désactive cette fonction et "
-"utilise la méthode par défaut."
+"Angle auquel le repassage des angles se fait. Un nombre négatif désactive "
+"cette fonction et utilise la méthode par défaut."

 msgid "This gcode part is inserted at every layer change after lift z"
 msgstr ""
@@ -9402,7 +9433,9 @@ msgid "Maximum acceleration for travel"
 msgstr "Accélération maximale de déplacement"

 msgid "Maximum acceleration for travel (M204 T), it only applies to Marlin 2"
-msgstr "Accélération maximale pour le déplacement (M204 T), elle ne s'applique qu'à Marlin 2"
+msgstr ""
+"Accélération maximale pour le déplacement (M204 T), elle ne s'applique qu'à "
+"Marlin 2"

 msgid ""
 "Part cooling fan speed may be increased when auto cooling is enabled. This "
@@ -9497,8 +9530,11 @@ msgstr ""
 msgid "Min print speed"
 msgstr "Vitesse d'impression minimale"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "Vitesse d'impression minimale lors du ralentissement de l’impression"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""

 msgid "Nozzle diameter"
 msgstr "Diamètre de la buse"
@@ -9771,22 +9807,6 @@ msgstr ""
 "buse de toucher l'impression lors du déplacement. L'utilisation d'une ligne "
 "en spirale pour soulever l’axe Z peut empêcher le stringing"

-msgid "Z hop lower boundary"
-msgstr ""
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-
-msgid "Z hop upper boundary"
-msgstr ""
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-
 msgid "Z hop type"
 msgstr "Type de décalage en Z"

@@ -10143,9 +10163,9 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 "Cette valeur sera ajoutée (ou soustraite) à toutes les coordonnées Z dans le "
-"G-code de sortie. Elle est utilisée pour compenser une mauvaise position de la butée Z : par "
-"exemple, si votre butée zéro laisse en fait la buse à 0,3 mm du "
-"d'impression, définissez cette valeur à -0,3 (ou corrigez votre butée)."
+"G-code de sortie. Elle est utilisée pour compenser une mauvaise position de "
+"la butée Z : par exemple, si votre butée zéro laisse en fait la buse à 0,3 "
+"mm du d'impression, définissez cette valeur à -0,3 (ou corrigez votre butée)."

 msgid "Enable support"
 msgstr "Activer les supports"
@@ -10540,6 +10560,9 @@ msgstr ""
 "Ce gcode est inséré lors du changement de filament, y compris la commande T "
 "pour déclencher le changement d'outil"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10918,6 +10941,18 @@ msgstr ""
 "aussi épaisse que celle du modèle. Elle est exprimée en pourcentage sur le "
 "diamètre de la buse"

+msgid "Detect narrow internal solid infill"
+msgstr "Détecter un remplissage solide étroit"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Cette option détectera automatiquement les zones de remplissage solides "
+"étroits. Si activé, un motif concentrique sera utilisé pour les zones afin "
+"d'accélérer l'impression. Sinon, le motif rectiligne est utilisé par défaut."
+
 msgid "invalid value "
 msgstr "valeur invalide "

@@ -12289,6 +12324,50 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "La version %s de 3mf est plus récente que la version %s de %s, clés "
+#~ "suivantes non reconnues :"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Il est préférable de mettre à jour votre logiciel.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Nouvelle version 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "La version %s de 3mf est plus récente que la version %s de %s, nous vous "
+#~ "suggérons de mettre à jour votre logiciel."
+
+#~ msgid "Embeded"
+#~ msgstr "Intégré"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Le fichier de configuration de Orca Slicer est peut-être corrompu et ne "
+#~ "peut pas être analysé. Veuillez supprimer le fichier et réessayer."
+
+#~ msgid "Online Models"
+#~ msgstr "Modèles en ligne"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr ""
+#~ "Afficher les modèles en ligne sélectionnés par le staff sur la page "
+#~ "d'accueil"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr ""
+#~ "Vitesse d'impression minimale lors du ralentissement de l’impression"
+
 #~ msgid ""
 #~ "There are currently no identical spare consumables available, and "
 #~ "automatic replenishment is currently not possible. \n"
@@ -12311,17 +12390,6 @@ msgstr ""
 #~ "filament. Veuillez ouvrir la porte avant de l'imprimante avant d'imprimer "
 #~ "pour éviter que la buse ne se bouche."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Veiller à l'épaisseur verticale de la coque"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Ajouter un remplissage solide près des surfaces en pente pour garantir "
-#~ "l'épaisseur verticale de la coque (couches solides supérieures + "
-#~ "inférieures)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Température de vitrification"

@@ -12346,19 +12414,6 @@ msgstr ""
 #~ "auxiliaire fonctionnera à cette vitesse pendant l'impression, à "
 #~ "l'exception des premières couches définies sans refroidissement"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Détecter un remplissage solide étroit"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Cette option détectera automatiquement les zones de remplissage solides "
-#~ "étroits. Si activé, un motif concentrique sera utilisé pour les zones "
-#~ "afin d'accélérer l'impression. Sinon, le motif rectiligne est utilisé par "
-#~ "défaut."
-
 #~ msgid ""
 #~ "Bed temperature for layers except the initial one. Value 0 means the "
 #~ "filament does not support to print on the High Temp"
--- a/localization/i18n/hu/OrcaSlicer_hu.po
+++ b/localization/i18n/hu/OrcaSlicer_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -490,27 +490,12 @@ msgstr "Varratfestés"
 msgid "Remove selection"
 msgstr "Kijelölés törlése"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "Szöveg alakja"
-
 msgid "Font"
 msgstr "Betűtípus"

 msgid "Thickness"
 msgstr "Vastagság"

-msgid "Input text"
-msgstr "Szöveg"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"

@@ -522,12 +507,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"

+msgid "Input text"
+msgstr "Szöveg"
+
 msgid "Surface"
 msgstr "Surface"

 msgid "Horizontal text"
 msgstr "Horizontal text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "Szöveg alakja"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -613,11 +610,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -645,6 +637,13 @@ msgstr "Ez a legújabb verzió."
 msgid "Info"
 msgstr "Infó"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Újraindítás"

@@ -3726,11 +3725,11 @@ msgstr "Virtuális kameraeszközök letöltése"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "Már fut egy másik virtuális kamera.\n"
-"A Bambu Studio csak egy virtuális kamerát támogat.\n"
+"A Orca Slicer csak egy virtuális kamerát támogat.\n"
 "Leállítod ezt a virtuális kamerát?"

 #, c-format, boost-format
@@ -3840,7 +3839,7 @@ msgid "Failed to parse model infomations."
 msgstr "Failed to parse model infomation"

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""

@@ -4547,28 +4546,6 @@ msgstr "A konfiguráció nem tölthető be."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, a következő "
-"ismeretlen kulcsokat találtuk:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Jobb lenne, ha frissítenéd a szoftvert.\n"
-
-msgid "Newer 3mf version"
-msgstr "Újabb 3mf verzió"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, javasolt a szoftver "
-"frissítése."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Invalid values found in the 3mf:"

@@ -4774,7 +4751,7 @@ msgid "Project downloaded %d%%"
 msgstr "Projekt letöltve %d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -5007,6 +4984,15 @@ msgstr "Angolszász"
 msgid "Units"
 msgstr "Mértékegység"

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr "Zoom to mouse position"

@@ -5023,6 +5009,12 @@ msgstr ""
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""

+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "A nap tippje értesítés megjelenítése indítás után"

@@ -5082,12 +5074,6 @@ msgstr ""
 "Ha engedélyezve van, a OrcaSlicer-t állítja be alapértelmezett "
 "alkalmazásként a .step fájlok megnyitásához"

-msgid "Online Models"
-msgstr "Online Models"
-
-msgid "Show online staff-picked models on the home page"
-msgstr "Show online staff-picked models on the home page"
-
 msgid "Maximum recent projects"
 msgstr "Maximum recent projects"

@@ -5651,7 +5637,7 @@ msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr ""
 "A MicroSD card needs to be inserted before sending to the printer SD card."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
 msgstr ""
 "A nyomtatónak ugyanazon a hálózaton kell lennie, mint a Bambu Studiónak."

@@ -6125,6 +6111,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Filament csere G-kód"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Szünet G-kód"

@@ -6739,17 +6728,17 @@ msgid "Network plug-in update"
 msgstr "Hálózati bővítmény frissítése"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""
-"Kattints az OK gombra a hálózati bővítmény frissítéséhez a Bambu Studio "
+"Kattints az OK gombra a hálózati bővítmény frissítéséhez a Orca Slicer "
 "következő indításakor."

 #, c-format, boost-format
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr "Új hálózati bővítmény (%s) érhető el. Szeretnéd telepíteni?"

-msgid "New version of Bambu Studio"
-msgstr "A Bambu Studio új verziója"
+msgid "New version of Orca Slicer"
+msgstr "A Orca Slicer új verziója"

 msgid "Don't remind me of this version again"
 msgstr "Ne emlékeztessen újra erre a verzióra."
@@ -6761,9 +6750,9 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "LAN kapcsolódás sikertelen (nyomtatási fájl küldése)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
 msgstr ""
-"1. lépés: Ellenőrizd, hogy a Bambu Studio és a nyomtató ugyanazon a helyi "
+"1. lépés: Ellenőrizd, hogy a Orca Slicer és a nyomtató ugyanazon a helyi "
 "hálózaton van."

 msgid ""
@@ -6838,7 +6827,7 @@ msgid ""
 msgstr ""
 "A firmware verziója rendellenes. A nyomtatás előtt javításra és frissítésre "
 "van szükség. Szeretnél frissíteni most? A frissítés később is elvégezhető a "
-"Bambu Studio következő indításakor."
+"Orca Slicer következő indításakor."

 msgid "Extension Board"
 msgstr "Bővítőpanel"
@@ -7628,6 +7617,15 @@ msgstr ""
 "Csökkentsd kicsit ezt az értéket (például 0,9-re), hogy ezzel csökkentsd az "
 "áthidaláshoz használt anyag mennyiségét, és a megereszkedést"

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""

@@ -7922,6 +7920,15 @@ msgstr ""
 "Ha ki van kapcsolva, az áthidalások jobban néznek ki, de csak a rövidebb "
 "áthidalt távolságokon megbízhatóak."

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Maximum áthidalás hossza"

@@ -7944,6 +7951,16 @@ msgstr "Befejező G-kód az egész nyomtatás befejezésekor"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Befejező G-kód a filament nyomtatásának befejezésekor"

+msgid "Ensure vertical shell thickness"
+msgstr "Függőleges héjvastagság biztosítása"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"A függőleges héjvastagság biztosítása érdekében szilárd kitöltést alkalmaz a "
+"lejtős felületek közelében."
+
 msgid "Top surface pattern"
 msgstr "Felső felület mintázata"

@@ -9167,8 +9184,11 @@ msgstr ""
 msgid "Min print speed"
 msgstr "Min. nyomtatási sebesség"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "A minimum nyomtatási sebesség hűtés miatti lassításkor."
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""

 msgid "Nozzle diameter"
 msgstr "Fúvóka átmérője"
@@ -9428,22 +9448,6 @@ msgstr ""
 "nagyobb mozgás közben a tárgynak ütközzön. A Z tengely emelésekor használt "
 "körkörös mozgás megelőzheti a szálazást."

-msgid "Z hop lower boundary"
-msgstr ""
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-
-msgid "Z hop upper boundary"
-msgstr ""
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-
 msgid "Z hop type"
 msgstr ""

@@ -10166,6 +10170,9 @@ msgstr ""
 "Ez a G-kód kerül beillesztésre, amikor a filament csere történik, beleértve "
 "a szerszámváltást indító T parancsokat is."

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10528,6 +10535,19 @@ msgstr ""
 "mint a nyomtatandó elem vastagsága, akkor a fal olyan vastag lesz, mint maga "
 "a nyomtatott elem. A fúvóka átmérőjének százalékában van kifejezve"

+msgid "Detect narrow internal solid infill"
+msgstr "Keskeny belső szilárd kitöltés felismerése"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Ez a beállítás automatikusan felismeri a keskeny belső tömör kitöltési "
+"területeket. Ha engedélyezve van, a nyomtatás felgyorsítása érdekében ezen a "
+"területen a koncentrikus mintát fogja használni. Ellenkező esetben "
+"alapértelmezés szerint az egyenes vonalú mintát használja."
+
 msgid "invalid value "
 msgstr "invalid value "

@@ -11860,6 +11880,40 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, a következő "
+#~ "ismeretlen kulcsokat találtuk:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Jobb lenne, ha frissítenéd a szoftvert.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Újabb 3mf verzió"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "A 3mf fájl %s verziója újabb, mint a(z) %s verziója %s, javasolt a "
+#~ "szoftver frissítése."
+
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
+#~ msgid "Online Models"
+#~ msgstr "Online Models"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr "Show online staff-picked models on the home page"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr "A minimum nyomtatási sebesség hűtés miatti lassításkor."
+
 #~ msgid ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clog."
@@ -11868,16 +11922,6 @@ msgstr ""
 #~ "Kérjük, hogy a nyomtatás során tartsd nyitva a nyomtatót, vagy csökkentsd "
 #~ "az asztalhőmérsékletet."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Függőleges héjvastagság biztosítása"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "A függőleges héjvastagság biztosítása érdekében szilárd kitöltést "
-#~ "alkalmaz a lejtős felületek közelében."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Üvegesedési hőmérséklet"

@@ -11902,19 +11946,6 @@ msgstr ""
 #~ "ezen a fordulatszámon fog működni a nyomtatás során, kivéve az első "
 #~ "néhány réteget, amelynél kikapcsolt hűtés van megadva"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Keskeny belső szilárd kitöltés felismerése"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Ez a beállítás automatikusan felismeri a keskeny belső tömör kitöltési "
-#~ "területeket. Ha engedélyezve van, a nyomtatás felgyorsítása érdekében "
-#~ "ezen a területen a koncentrikus mintát fogja használni. Ellenkező esetben "
-#~ "alapértelmezés szerint az egyenes vonalú mintát használja."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Az alsó üres rétegeket a legközelebbi normál rétegek váltják fel."

--- a/localization/i18n/it/OrcaSlicer_it.po
+++ b/localization/i18n/it/OrcaSlicer_it.po
--- a/localization/i18n/ja/OrcaSlicer_ja.po
+++ b/localization/i18n/ja/OrcaSlicer_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -489,27 +489,12 @@ msgstr "継ぎ目ペイント"
 msgid "Remove selection"
 msgstr "選択を削除"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mouse move up or dowm"
-
-msgid "Rotate text"
-msgstr "Rotate text"
-
-msgid "Text shape"
-msgstr "文字形状"
-
 msgid "Font"
 msgstr "フォント"

 msgid "Thickness"
 msgstr "太さ"

-msgid "Input text"
-msgstr "テキスト"
-
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Text Gap"

@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"

+msgid "Input text"
+msgstr "テキスト"
+
 msgid "Surface"
 msgstr "Surface"

 msgid "Horizontal text"
 msgstr "Horizontal text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mouse move up or dowm"
+
+msgid "Rotate text"
+msgstr "Rotate text"
+
+msgid "Text shape"
+msgstr "文字形状"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -608,11 +605,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -640,6 +632,13 @@ msgstr "最新バージョンです。"
 msgid "Info"
 msgstr "情報"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "再構築"

@@ -3633,7 +3632,7 @@ msgstr "バーチャルカメラツールをダウンロード"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "別のバーチャルカメラを作動しています為、もう一個が起動できません。\n"
@@ -3745,7 +3744,7 @@ msgid "Failed to parse model infomations."
 msgstr "Failed to parse model infomation"

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""

@@ -4444,27 +4443,6 @@ msgstr ""
 "3mfは古いバージョンのOrca Slicerで作成されています、ジオメトリーデータのみ読"
 "込みます。"

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"3mfのバージョン %s は %sのバージョン %sより新しい為、下記のキーを認識できませ"
-"ん"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "ソフトウェアをアップデートする必要があります。\n"
-
-msgid "Newer 3mf version"
-msgstr "新3mfバージョン"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"3mfのバージョン%sは%sの%sより新しい為、ソフトウェアを更新してください。"
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Invalid values found in the 3mf:"

@@ -4666,7 +4644,7 @@ msgid "Project downloaded %d%%"
 msgstr "プロジェクトをダウンロード %d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -4898,6 +4876,15 @@ msgstr "インチ"
 msgid "Units"
 msgstr "単位"

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr "Zoom to mouse position"

@@ -4914,6 +4901,12 @@ msgstr ""
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""

+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "起動後「毎日のヒント」を表示"

@@ -4965,12 +4958,6 @@ msgstr ".step/.stpファイルをOrca Slicerに関連付けます。"
 msgid "If enabled, sets OrcaSlicer as default application to open .step files"
 msgstr "デフォルトで.step/.stpファイルをOrca Slicerで開く"

-msgid "Online Models"
-msgstr "Online Models"
-
-msgid "Show online staff-picked models on the home page"
-msgstr "Show online staff-picked models on the home page"
-
 msgid "Maximum recent projects"
 msgstr "Maximum recent projects"

@@ -5511,9 +5498,9 @@ msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr ""
 "A MicroSD card needs to be inserted before sending to the printer SD card."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
 msgstr ""
-"このプリンターを使用するには、Bambu Studioを同一のLANで使用してください。"
+"このプリンターを使用するには、Orca Slicerを同一のLANで使用してください。"

 msgid "The printer does not support sending to printer SD card."
 msgstr "このプリンターはSDカードに送信することができません"
@@ -5966,6 +5953,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "フィラメント変更G-code"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-codeを一時停止"

@@ -6560,16 +6550,16 @@ msgid "Network plug-in update"
 msgstr "ネットワークプラグインの更新"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""
-"OK をクリックすると、次回 Bambu Studio を起動したときにネットワークプラグイン"
+"OK をクリックすると、次回 Orca Slicer を起動したときにネットワークプラグイン"
 "が更新されます。"

 #, c-format, boost-format
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr "新しいプラグイン (%s) が発見しました、インストールしますか？"

-msgid "New version of Bambu Studio"
+msgid "New version of Orca Slicer"
 msgstr "新バージョン"

 msgid "Don't remind me of this version again"
@@ -6582,9 +6572,8 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "LAN接続失敗 (造形ファイル送信)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
-msgstr ""
-"１Bambu Studioとプリンターが同一のLANに繋いでいること確認してください。"
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
+msgstr "１Orca Slicerとプリンターが同一のLANに繋いでいること確認してください。"

 msgid ""
 "Step 2, if the IP and Access Code below are different from the actual values "
@@ -7389,6 +7378,15 @@ msgstr ""
 "この値を少し (例えば 0.9) 小さくし、ブリッジ用に押出し量を減らし、たるみを防"
 "ぎます。"

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""

@@ -7673,6 +7671,15 @@ msgstr ""
 "有効になる場合、より長いブリッジを造形できますが、仕上がりが劣る可能性があり"
 "ます。"

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "最大ブリッジ長さ"

@@ -7694,6 +7701,14 @@ msgstr "造形完了時のG-codeを追加"
 msgid "End G-code when finish the printing of this filament"
 msgstr "このフィラメントを使用終わった時のG-codeを追加"

+msgid "Ensure vertical shell thickness"
+msgstr "壁の厚さを確保"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr "傾斜面にソリッドインフィルを追加"
+
 msgid "Top surface pattern"
 msgstr "トップ面パターン"

@@ -8869,8 +8884,11 @@ msgstr ""
 msgid "Min print speed"
 msgstr "最小造形速度"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "冷却のために速度を落とした時の最低造形速度。"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""

 msgid "Nozzle diameter"
 msgstr "ノズル直径"
@@ -9118,22 +9136,6 @@ msgstr ""
 "リトラクション時に、ノズルを少し上げてから移動します。この動作でモデルとの衝"
 "突を回避できます。"

-msgid "Z hop lower boundary"
-msgstr ""
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-
-msgid "Z hop upper boundary"
-msgstr ""
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-
 msgid "Z hop type"
 msgstr ""

@@ -9820,6 +9822,9 @@ msgid ""
 "tool change"
 msgstr "フィラメントを切り替える直後に実行するG-codeです。"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10158,6 +10163,18 @@ msgstr ""
 "thickness of the feature, the wall will become as thick as the feature "
 "itself. It's expressed as a percentage over nozzle diameter"

+msgid "Detect narrow internal solid infill"
+msgstr "薄いソリッド インフィル検出"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"ソリッド インフィル領域に狭い部分があるか検出します。その設定を有効にする場"
+"合、狭い領域は同心パターンを使用し、それ以外の領域は、直線パターンを使用しま"
+"す。"
+
 msgid "invalid value "
 msgstr "invalid value "

@@ -11466,6 +11483,39 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "3mfのバージョン %s は %sのバージョン %sより新しい為、下記のキーを認識でき"
+#~ "ません"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "ソフトウェアをアップデートする必要があります。\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "新3mfバージョン"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "3mfのバージョン%sは%sの%sより新しい為、ソフトウェアを更新してください。"
+
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
+#~ msgid "Online Models"
+#~ msgstr "Online Models"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr "Show online staff-picked models on the home page"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr "冷却のために速度を落とした時の最低造形速度。"
+
 #~ msgid ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clog."
@@ -11473,14 +11523,6 @@ msgstr ""
 #~ "ベッド温度がフィラメントの軟化温度より高いです、ノズル詰まりが発生する可能"
 #~ "性があります。ベッド温度を下げるか、プリンタのドアを開けてください。"

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "壁の厚さを確保"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr "傾斜面にソリッドインフィルを追加"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "軟化温度"

@@ -11500,18 +11542,6 @@ msgstr ""
 #~ "cooling layers"
 #~ msgstr "補助パーツ冷却ファンの回転速度です。"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "薄いソリッド インフィル検出"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "ソリッド インフィル領域に狭い部分があるか検出します。その設定を有効にする"
-#~ "場合、狭い領域は同心パターンを使用し、それ以外の領域は、直線パターンを使用"
-#~ "します。"
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "底面との隙間があります、レイヤーを入れ替えました"

--- a/localization/i18n/ko/OrcaSlicer_ko.po
+++ b/localization/i18n/ko/OrcaSlicer_ko.po
@@ -7,9 +7,10 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
-"PO-Revision-Date: 2023-10-26 16:47+0900\n"
-"Last-Translator: Hotsolidinfill\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
+"PO-Revision-Date: 2023-11-14 11:26+0900\n"
+"Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply."
+"github.com>, crwusiz <crwusiz@naver.com>\n"
 "Language-Team: \n"
 "Language: ko_KR\n"
 "MIME-Version: 1.0\n"
@@ -495,27 +496,12 @@ msgstr "솔기 칠하기"
 msgid "Remove selection"
 msgstr "선택 삭제"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + 마우스 위 or 아래"
-
-msgid "Rotate text"
-msgstr "텍스트 회전"
-
-msgid "Text shape"
-msgstr "텍스트 모양"
-
 msgid "Font"
 msgstr "글꼴"

 msgid "Thickness"
 msgstr "두께"

-msgid "Input text"
-msgstr "텍스트 입력"
-
-msgid "Embeded"
-msgstr "매입"
-
 msgid "Text Gap"
 msgstr "글자 간격"

@@ -529,12 +515,24 @@ msgstr ""
 "내장\n"
 "깊이"

+msgid "Input text"
+msgstr "텍스트 입력"
+
 msgid "Surface"
 msgstr "표면"

 msgid "Horizontal text"
 msgstr "가로 텍스트"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + 마우스 위 or 아래"
+
+msgid "Rotate text"
+msgstr "텍스트 회전"
+
+msgid "Text shape"
+msgstr "텍스트 모양"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -623,13 +621,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 런타임"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer 구성 파일이 손상되어 구문 분석할 수 없습니다. 파일을 삭제하고 다"
-"시 시도하십시오."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -657,6 +648,16 @@ msgstr "최신 버전입니다."
 msgid "Info"
 msgstr "정보"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+"OrcaSlicer 구성 파일이 손상되어 구문을 분석할 수 없습니다.\n"
+"OrcaSlicer가 구성 파일을 다시 생성하려고 시도했습니다.\n"
+"응용 프로그램 설정은 손실되지만 프린터 프로필은 영향을 받지 않습니다."
+
 msgid "Rebuild"
 msgstr "재빌드"

@@ -3704,11 +3705,11 @@ msgstr "가상 카메라 도구 다운로드"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "다른 가상 카메라가 실행 중입니다.\n"
-"Bambu Studio는 단일 가상 카메라만 지원합니다.\n"
+"Orca Slicer는 단일 가상 카메라만 지원합니다.\n"
 "이 가상 카메라를 중지하시겠습니까?"

 #, c-format, boost-format
@@ -3817,7 +3818,7 @@ msgid "Failed to parse model infomations."
 msgstr "모델 정보를 해석하지 못했습니다."

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""
 ".gcode.3mf 파일에는 G코드 데이터가 없습니다. OrcaSlicer에서 이를 슬라이스하"
@@ -4544,28 +4545,6 @@ msgstr "구성을 로드할 수 없습니다."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr "이 3mf는 이전 Orca Slicer에서 생성되었으며, 형상 데이터만 로드합니다."

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"3mf의 버전 %s이(가) %s의 버전 %s보다 최신입니다. 인식할 수 없는 다음 키를 찾"
-"았습니다:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "소프트웨어를 업그레이드하는 것이 좋습니다.\n"
-
-msgid "Newer 3mf version"
-msgstr "최신 3mf 버전"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"3mf의 %s 버전이 %s의 %s 버전보다 최신입니다. 소프트웨어를 업그레이드 하십시"
-"오."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "3mf에서 잘못된 값이 발견됨:"

@@ -4767,11 +4746,11 @@ msgid "Project downloaded %d%%"
 msgstr "프로젝트 다운로드 %d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""
-"Bambu Studio로 가져오는 데 실패했습니다. 파일을 다운로드하여 수동으로 가져오"
-"세요."
+"Orca Slicer로 가져오는 데 실패했습니다. 파일을 다운로드하여 수동으로 가져오세"
+"요."

 msgid "The selected file"
 msgstr "선택한 파일"
@@ -5000,6 +4979,15 @@ msgstr "야드파운드법"
 msgid "Units"
 msgstr "단위"

+msgid "Home"
+msgstr "홈"
+
+msgid "Default Page"
+msgstr "기본 페이지"
+
+msgid "Set the page opened on startup."
+msgstr "시작 시 열리는 페이지를 설정합니다."
+
 msgid "Zoom to mouse position"
 msgstr "마우스 위치로 확대"

@@ -5016,6 +5004,12 @@ msgstr ""
 "활성화된 경우 자유로운 카메라 앵글을 사용합니다. 활성화되지 않은 경우 제한된 "
 "카메라 앵글을 사용합니다."

+msgid "Show splash screen"
+msgstr "스플래시 화면 표시"
+
+msgid "Show the splash screen during startup."
+msgstr "시작하는 동안 스플래시 화면을 표시합니다."
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "시작 후 \"오늘의 팁\" 알림 표시"

@@ -5071,12 +5065,6 @@ msgstr ""
 "활성화된 경우 OrcaSlicer를 기본 응용 프로그램으로 설정하여 .step 파일을 엽니"
 "다"

-msgid "Online Models"
-msgstr "온라인 모델"
-
-msgid "Show online staff-picked models on the home page"
-msgstr "홈페이지에서 추천 온라인 모델 보기"
-
 msgid "Maximum recent projects"
 msgstr "최근 프로젝트 최대 표시"

@@ -5628,8 +5616,8 @@ msgstr "업그레이드가 진행 중일 때 출력 작업을 보낼 수 없습
 msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr "프린터 SD 카드로 보내기 전에 SD 카드를 삽입해야 합니다."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
-msgstr "프린터는 Bambu Studio와 동일한 LAN에 있어야 합니다."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
+msgstr "프린터는 Orca Slicer와 동일한 LAN에 있어야 합니다."

 msgid "The printer does not support sending to printer SD card."
 msgstr "프린터는 프린터 SD 카드로의 전송을 지원하지 않습니다."
@@ -5813,8 +5801,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "툴헤드 없이 시간 경과를 기록할 경우 \"타임랩스 닦기 타워\"를 추가하는 것이 좋"
 "습니다\n"
@@ -6087,6 +6075,9 @@ msgstr "타임랩스 G코드"
 msgid "Change filament G-code"
 msgstr "필라멘트 교체 G코드"

+msgid "Change extrusion role G-code"
+msgstr "압출 역할 G코드 변경"
+
 msgid "Pause G-code"
 msgstr "일시정지 G코드"

@@ -6701,16 +6692,16 @@ msgid "Network plug-in update"
 msgstr "네트워크 플러그인 업데이트"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""
-"다음 번 Bambu Studio를 시작할 때 네트워크 플러그인을 업데이트하려면 확인을 클"
+"다음 번 Orca Slicer를 시작할 때 네트워크 플러그인을 업데이트하려면 확인을 클"
 "릭합니다."

 #, c-format, boost-format
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr "새 네트워크 플러그인(%s)을 사용할 수 있습니다. 설치하시겠습니까?"

-msgid "New version of Bambu Studio"
+msgid "New version of Orca Slicer"
 msgstr "뱀부 스튜디오의 새 버전"

 msgid "Don't remind me of this version again"
@@ -6723,9 +6714,9 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "LAN 연결 실패(출력 파일 전송 중)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
 msgstr ""
-"1단계, Bambu Studio와 프린터가 동일한 인터넷 망에 연결되어 있는지 확인하십시"
+"1단계, Orca Slicer와 프린터가 동일한 인터넷 망에 연결되어 있는지 확인하십시"
 "오."

 msgid ""
@@ -7570,6 +7561,15 @@ msgid ""
 "material for bridge, to improve sag"
 msgstr "이 값을 약간(예: 0.9) 줄여 다리의 압출량을 줄여 처짐을 개선합니다"

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "상단 표면 유량 비율"

@@ -7689,7 +7689,7 @@ msgid "Enable this option to slow printing down for different overhang degree"
 msgstr "돌출부 정도에 따라 출력 속도를 낮추려면 이 옵션을 활성화합니다"

 msgid "Slow down for curled perimeters"
-msgstr "꺾여 있는 둘레에는 속도를 줄이세요"
+msgstr "꺾여 있는 둘레에서 감속"

 msgid ""
 "Enable this option to slow printing down in areas where potential curled "
@@ -7887,6 +7887,15 @@ msgstr ""
 "습니다. 비활성화하면 다리가 더 좋아 보이지만 짧은 브리지 거리에 대해서만 안정"
 "적입니다."

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "최대 다리 거리"

@@ -7907,6 +7916,16 @@ msgstr "전체 출력이 끝날때의 End G-code"
 msgid "End G-code when finish the printing of this filament"
 msgstr "이 필라멘트의 출력이 끝날때의 End G-code"

+msgid "Ensure vertical shell thickness"
+msgstr "수직 쉘 두께 확보"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"경사진 표면 근처에 꽉찬 내부 채움을 추가하여 수직 쉘 두께를 보장합니다(상단"
+"+하단 꽉찬 레이어)"
+
 msgid "Top surface pattern"
 msgstr "상단 표면 패턴"

@@ -8596,10 +8615,10 @@ msgstr "팬 최대 속도 레이어"

 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer "
-"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
-"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
-"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
+"\". \"full_fan_speed_layer\" will be ignored if lower than "
+"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
+"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "팬 속도는 \"close_fan_the_first_x_layers\" 의 0에서 \"full_fan_speed_layer\" "
 "의 최고 속도까지 선형적으로 증가합니다. \"full_fan_speed_layer\"가 "
@@ -9231,8 +9250,13 @@ msgstr ""
 msgid "Min print speed"
 msgstr "최소 출력 속도"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "\"레이어 냉각 향상을 위한 감속\" 시 최소 출력 속도"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""
+"보다 나은 레이어 냉각을 위해 속도를 늦출 때, 돌출부 출력 속도가 명시적으로 지"
+"정되지 않은 경우 필라멘트의 최소 출력 속도가 활성화됩니다."

 msgid "Nozzle diameter"
 msgstr "노즐 직경"
@@ -9504,26 +9528,6 @@ msgstr ""
 "니다. 이동 시 노즐이 출력물에 부딪히는 것을 방지합니다. 나선 라인(Spiral "
 "line)을 사용하여 Z를 올리면 실 발생을 방지할 수 있습니다"

-msgid "Z hop lower boundary"
-msgstr "Z 올리기 하한 경계"
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-"Z 올리기는 Z가 이 값보다 크고 \"Z 올리기 상한 경계\" 매개변수 아래인 경우에"
-"만 적용됩니다."
-
-msgid "Z hop upper boundary"
-msgstr "Z 올리기 상한 경계"
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-"이 값이 양수인 경우 Z 올리기는 Z가 매개변수 \"Z 올리기 하한 경계\"보다 높고 "
-"이 값보다 낮을 때만 적용됩니다"
-
 msgid "Z hop type"
 msgstr "Z 올리기 유형"

@@ -10285,6 +10289,9 @@ msgstr ""
 "이 G코드는 도구 변경을 유발하는 T 명령을 포함하여 필라멘트를 변경할 때 삽입됩"
 "니다"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr "이 G코드는 압출 역할이 변경될 때 삽입됩니다."
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10654,6 +10661,18 @@ msgstr ""
 "비가 형상의 두께보다 얇은 경우 벽은 형상 자체만큼 두꺼워집니다. 노즐 직경에 "
 "대한 백분율로 표시됩니다"

+msgid "Detect narrow internal solid infill"
+msgstr "좁은 내부 꽉찬 내부 채움 감지"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"이 옵션은 좁은 내부 꽉찬 내부 채움 영역을 자동으로 감지합니다. 활성화하면 출"
+"력 속도를 높이기 위해 해당 영역에 동심 패턴이 사용됩니다. 그렇지 않으면 직선 "
+"패턴이 기본적으로 사용됩니다."
+
 msgid "invalid value "
 msgstr "잘못된 값 "

@@ -12096,6 +12115,67 @@ msgstr ""
 "기/핫엔드가 막힐 가능성을 줄일 수 있습니다. 이에 대한 자세한 내용은 Wiki에서 "
 "확인하세요."

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "3mf의 버전 %s이(가) %s의 버전 %s보다 최신입니다. 인식할 수 없는 다음 키를 "
+#~ "찾았습니다:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "소프트웨어를 업그레이드하는 것이 좋습니다.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "최신 3mf 버전"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "3mf의 %s 버전이 %s의 %s 버전보다 최신입니다. 소프트웨어를 업그레이드 하십"
+#~ "시오."
+
+#~ msgid "Embeded"
+#~ msgstr "매입"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer 구성 파일이 손상되어 구문 분석할 수 없습니다. 파일을 삭제하고 "
+#~ "다시 시도하십시오."
+
+#~ msgid "Online Models"
+#~ msgstr "온라인 모델"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr "홈페이지에서 추천 온라인 모델 보기"
+
+#~ msgid "Z hop lower boundary"
+#~ msgstr "Z 올리기 하한 경계"
+
+#~ msgid ""
+#~ "Z hop will only come into effect when Z is above this value and is below "
+#~ "the parameter: \"Z hop upper boundary\""
+#~ msgstr ""
+#~ "Z 올리기는 Z가 이 값보다 크고 \"Z 올리기 상한 경계\" 매개변수 아래인 경우"
+#~ "에만 적용됩니다."
+
+#~ msgid "Z hop upper boundary"
+#~ msgstr "Z 올리기 상한 경계"
+
+#~ msgid ""
+#~ "If this value is positive, Z hop will only come into effect when Z is "
+#~ "above the parameter: \"Z hop lower boundary\" and is below this value"
+#~ msgstr ""
+#~ "이 값이 양수인 경우 Z 올리기는 Z가 매개변수 \"Z 올리기 하한 경계\"보다 높"
+#~ "고 이 값보다 낮을 때만 적용됩니다"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr "\"레이어 냉각 향상을 위한 감속\" 시 최소 출력 속도"
+
 #~ msgid ""
 #~ "There are currently no identical spare consumables available, and "
 #~ "automatic replenishment is currently not possible. \n"
@@ -12119,16 +12199,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "더 나은 공기 여과를 위해 활성화하세요"

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "수직 쉘 두께 확보"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "경사진 표면 근처에 꽉찬 내부 채움을 추가하여 수직 쉘 두께를 보장합니다(상"
-#~ "단+하단 꽉찬 레이어)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "유리 전이 온도"

@@ -12157,18 +12227,6 @@ msgstr ""
 #~ "보조 출력 냉각 팬의 속도입니다. 냉각 중지 레이어로 정의된 처음 몇 개의 레"
 #~ "이어를 제외하고 출력 중에 보조 팬이 이 속도로 작동됩니다"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "좁은 내부 꽉찬 내부 채움 감지"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "이 옵션은 좁은 내부 꽉찬 내부 채움 영역을 자동으로 감지합니다. 활성화하면 "
-#~ "출력 속도를 높이기 위해 해당 영역에 동심 패턴이 사용됩니다. 그렇지 않으면 "
-#~ "직선 패턴이 기본적으로 사용됩니다."
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"
--- a/localization/i18n/nl/OrcaSlicer_nl.po
+++ b/localization/i18n/nl/OrcaSlicer_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -492,28 +492,12 @@ msgstr "Naad schilderen"
 msgid "Remove selection"
 msgstr "Selectie verwijderen"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Muis op of neer"
-
-msgid "Rotate text"
-msgstr "Draai tekst"
-
-msgid "Text shape"
-msgstr "Tekstvorm"
-
 msgid "Font"
 msgstr "Lettertype"

 msgid "Thickness"
 msgstr "Dikte"

-msgid "Input text"
-msgstr "Tekst invoeren"
-
-# Source and destination string both English but don't match!
-msgid "Embeded"
-msgstr "Embedded"
-
 msgid "Text Gap"
 msgstr "Tekstruimte"

@@ -525,12 +509,24 @@ msgid ""
 "depth"
 msgstr "Embedded depth"

+msgid "Input text"
+msgstr "Tekst invoeren"
+
 msgid "Surface"
 msgstr "Oppervlak"

 msgid "Horizontal text"
 msgstr "Horizontale tekst"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Muis op of neer"
+
+msgid "Rotate text"
+msgstr "Draai tekst"
+
+msgid "Text shape"
+msgstr "Tekstvorm"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -623,13 +619,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 Runtime"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer configuratiebestand is mogelijks corrupt, en kan niet verwerkt "
-"worden.Verwijder het configuratiebestand en probeer het opnieuw."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -658,6 +647,13 @@ msgstr "Dit is de nieuwste versie."
 msgid "Info"
 msgstr "Informatie"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Herbouwen"

@@ -3758,11 +3754,11 @@ msgstr "Hulpmiddelen voor virtuele camera's downloaden"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "Er draait nog een virtuele camera.\n"
-"Bambu Studio ondersteunt slechts één virtuele camera.\n"
+"Orca Slicer ondersteunt slechts één virtuele camera.\n"
 "Wil je deze virtuele camera stoppen?"

 #, c-format, boost-format
@@ -3872,7 +3868,7 @@ msgid "Failed to parse model infomations."
 msgstr "Failed to parse model infomation"

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""

@@ -4592,28 +4588,6 @@ msgstr "De configuratie kan niet worden geladen."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"Versie %s van de 3mf is nieuwer dan versie %s van %s. De volgende sleutels "
-"worden niet herkend:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "U dient de software te upgraden.\n"
-
-msgid "Newer 3mf version"
-msgstr "Nieuwere versie 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Versie %s van de 3mf is nieuwer dan versie %s van %s. Wij stellen voor om uw "
-"software te upgraden."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Invalid values found in the 3mf:"

@@ -4827,7 +4801,7 @@ msgid "Project downloaded %d%%"
 msgstr "Project %d%% gedownload"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -5064,6 +5038,15 @@ msgstr "Imperiaal"
 msgid "Units"
 msgstr "Eenheden"

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr "Zoom to mouse position"

@@ -5080,6 +5063,12 @@ msgstr ""
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""

+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Toon de melding 'Tip van de dag' na het starten"

@@ -5140,12 +5129,6 @@ msgstr ""
 "Indien ingeschakeld, wordt Orca Slicer ingesteld als de standaardtoepassing "
 "om .step-bestanden te openen"

-msgid "Online Models"
-msgstr "Online Models"
-
-msgid "Show online staff-picked models on the home page"
-msgstr "Show online staff-picked models on the home page"
-
 msgid "Maximum recent projects"
 msgstr "Maximum recent projects"

@@ -5716,8 +5699,8 @@ msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr ""
 "A MicroSD card needs to be inserted before sending to the printer SD card."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
-msgstr "De printer moet zich in hetzelfde LAN bevinden als Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
+msgstr "De printer moet zich in hetzelfde LAN bevinden als Orca Slicer."

 msgid "The printer does not support sending to printer SD card."
 msgstr ""
@@ -6198,6 +6181,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Filament G-code aanpassen"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Pauzeer G-code"

@@ -6821,9 +6807,9 @@ msgid "Network plug-in update"
 msgstr "Netwerk plug-in update"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""
-"Klik op OK om de netwerkplug-in bij te werken wanneer Bambu Studio de "
+"Klik op OK om de netwerkplug-in bij te werken wanneer Orca Slicer de "
 "volgende keer wordt gestart."

 #, c-format, boost-format
@@ -6831,8 +6817,8 @@ msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr ""
 "Een nieuwe netwerk plug-in (%s) is beschikbaar. Wilt je deze installeren?"

-msgid "New version of Bambu Studio"
-msgstr "Nieuwe versie van Bambu Studio"
+msgid "New version of Orca Slicer"
+msgstr "Nieuwe versie van Orca Slicer"

 msgid "Don't remind me of this version again"
 msgstr "Herinner me niet meer aan deze versie."
@@ -6844,9 +6830,9 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "LAN-verbinding mislukt (verzenden afdrukbestand)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
 msgstr ""
-"Stap 1, bevestig dat Bambu Studio en uw printer zich in hetzelfde LAN "
+"Stap 1, bevestig dat Orca Slicer en uw printer zich in hetzelfde LAN "
 "bevinden."

 msgid ""
@@ -6921,7 +6907,7 @@ msgid ""
 msgstr ""
 "De firmwareversie is abnormaal. Repareren en bijwerken is vereist voor het "
 "afdrukken. Wil je nu updaten? Je kunt ook later op de printer updaten of "
-"updaten wanneer je Bambu Studio de volgende keer start."
+"updaten wanneer je Orca Slicer de volgende keer start."

 msgid "Extension Board"
 msgstr "Extension Board"
@@ -7716,6 +7702,15 @@ msgstr ""
 "Verlaag deze waarde iets (bijvoorbeeld 0,9) om de hoeveelheid materiaal voor "
 "bruggen te verminderen, dit om doorzakken te voorkomen."

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""

@@ -8014,6 +8009,15 @@ msgstr ""
 "uitgeschakeld, zien bruggen er beter uit, maar zijn ze alleen betrouwbaar "
 "voor kortere afstanden."

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Maximale bruglengte"

@@ -8036,6 +8040,16 @@ msgid "End G-code when finish the printing of this filament"
 msgstr ""
 "Voeg een eind G-code toe bij het afronden van het printen van dit filament."

+msgid "Ensure vertical shell thickness"
+msgstr "Zorg voor een verticale schaaldikte"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Voeg dichte vulling toe in de buurt van hellende oppervlakken om de "
+"verticale schaaldikte te garanderen (boven+onder vaste lagen)."
+
 msgid "Top surface pattern"
 msgstr "Patroon bovenvlak"

@@ -9270,8 +9284,11 @@ msgstr ""
 msgid "Min print speed"
 msgstr "Minimale print snelheid"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "De minimale printsnelheid indien er afgeremd wordt om af te koelen"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""

 msgid "Nozzle diameter"
 msgstr "Nozzle diameter"
@@ -9539,22 +9556,6 @@ msgstr ""
 "de nozzle de print raakt bij veplaatsen. Het gebruik van spiraallijnen om Z "
 "op te tillen kan stringing voorkomen."

-msgid "Z hop lower boundary"
-msgstr ""
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-
-msgid "Z hop upper boundary"
-msgstr ""
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-
 msgid "Z hop type"
 msgstr ""

@@ -10280,6 +10281,9 @@ msgstr ""
 "Deze G-code wordt ingevoegd wanneer filament wordt vervangen, inclusief T-"
 "commando's om gereedschapswissel te activeren."

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10649,6 +10653,19 @@ msgstr ""
 "van het element, wordt de muur net zo dik als het object zelf. Dit wordt "
 "uitgedrukt als een percentage ten opzichte van de diameter van de nozzle"

+msgid "Detect narrow internal solid infill"
+msgstr "Detecteer dichte interne solide vulling (infill)"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Deze optie detecteert automatisch smalle interne solide opvul (infill) "
+"gebieden. Indien ingeschakeld, wordt het concentrische patroon gebruikt voor "
+"het gebied om het afdrukken te versnellen. Anders wordt standaard het "
+"rechtlijnige patroon gebruikt."
+
 msgid "invalid value "
 msgstr "invalid value "

@@ -11981,6 +11998,48 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "Versie %s van de 3mf is nieuwer dan versie %s van %s. De volgende "
+#~ "sleutels worden niet herkend:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "U dient de software te upgraden.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Nieuwere versie 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Versie %s van de 3mf is nieuwer dan versie %s van %s. Wij stellen voor om "
+#~ "uw software te upgraden."
+
+# Source and destination string both English but don't match!
+#~ msgid "Embeded"
+#~ msgstr "Embedded"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer configuratiebestand is mogelijks corrupt, en kan niet verwerkt "
+#~ "worden.Verwijder het configuratiebestand en probeer het opnieuw."
+
+#~ msgid "Online Models"
+#~ msgstr "Online Models"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr "Show online staff-picked models on the home page"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr "De minimale printsnelheid indien er afgeremd wordt om af te koelen"
+
 #~ msgid ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clog."
@@ -11989,16 +12048,6 @@ msgstr ""
 #~ "filament. Open de voorkdeur van de printer voor het printen om "
 #~ "verstopping van de nozzles te voorkomen."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Zorg voor een verticale schaaldikte"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Voeg dichte vulling toe in de buurt van hellende oppervlakken om de "
-#~ "verticale schaaldikte te garanderen (boven+onder vaste lagen)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Temperatuur van verglazing"

@@ -12023,19 +12072,6 @@ msgstr ""
 #~ "op deze snelheid tijdens het afdrukken, behalve de eerste paar lagen, die "
 #~ "worden gedefinieerd door geen koellagen"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Detecteer dichte interne solide vulling (infill)"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Deze optie detecteert automatisch smalle interne solide opvul (infill) "
-#~ "gebieden. Indien ingeschakeld, wordt het concentrische patroon gebruikt "
-#~ "voor het gebied om het afdrukken te versnellen. Anders wordt standaard "
-#~ "het rechtlijnige patroon gebruikt."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr ""
 #~ "Lege lagen in de buurt van de bodem worden vervangen door de "
--- a/localization/i18n/ru/OrcaSlicer_ru.po
+++ b/localization/i18n/ru/OrcaSlicer_ru.po
--- a/localization/i18n/sv/OrcaSlicer_sv.po
+++ b/localization/i18n/sv/OrcaSlicer_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -489,27 +489,12 @@ msgstr "Målning av sömmar"
 msgid "Remove selection"
 msgstr "Ta bort val"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + Mus flytta uppåt eller nedåt"
-
-msgid "Rotate text"
-msgstr "Rotera text"
-
-msgid "Text shape"
-msgstr "Text form"
-
 msgid "Font"
 msgstr "Typsnitt"

 msgid "Thickness"
 msgstr "Tjocklek"

-msgid "Input text"
-msgstr "Skriv in text"
-
-msgid "Embeded"
-msgstr "Inbäddad"
-
 msgid "Text Gap"
 msgstr "Text mellanrum"

@@ -521,12 +506,24 @@ msgid ""
 "depth"
 msgstr "Inbäddat djup"

+msgid "Input text"
+msgstr "Skriv in text"
+
 msgid "Surface"
 msgstr "Yta"

 msgid "Horizontal text"
 msgstr "Vågrät text"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + Mus flytta uppåt eller nedåt"
+
+msgid "Rotate text"
+msgstr "Rotera text"
+
+msgid "Text shape"
+msgstr "Text form"
+
 msgid "Ctrl+"
 msgstr "Ctrl +"

@@ -609,11 +606,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -641,6 +633,13 @@ msgstr "Det är den senaste versionen."
 msgid "Info"
 msgstr "Info"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Återskapa"

@@ -3713,11 +3712,11 @@ msgstr "Ladda ner Virtuella Kamerans Verktyg"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "En annan virtuell kamera körs.\n"
-"Bambu Studio stöder endast en virtuell kamera.\n"
+"Orca Slicer stöder endast en virtuell kamera.\n"
 "Vill du stoppa den här virtuella kameran?"

 #, c-format, boost-format
@@ -3827,7 +3826,7 @@ msgid "Failed to parse model infomations."
 msgstr "Det gick inte att analysera modellinformation"

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""

@@ -4532,28 +4531,6 @@ msgstr "Konfigurationen kan inte laddas."
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr ""
-"3mf:s version %s är nyare än %s version %s, Följande nycklar har hittats som "
-"inte känns igen:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Uppdatera mjukvaran.\n"
-
-msgid "Newer 3mf version"
-msgstr "Nyare 3mf version"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"3mf:s version %s är nyare än %s version %s, Föreslår att du uppdaterar din "
-"programvara."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "Ogiltiga värden hittades i 3mf:"

@@ -4760,7 +4737,7 @@ msgid "Project downloaded %d%%"
 msgstr "Projektet har laddats ned %d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -4990,6 +4967,15 @@ msgstr "Brittisk standard"
 msgid "Units"
 msgstr "Enheter"

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr "Zooma till musens position"

@@ -5006,6 +4992,12 @@ msgstr ""
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""

+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Visa \"Dagens tips\" efter start"

@@ -5059,12 +5051,6 @@ msgstr "Associera .step/.stp-filer till OrcaSlicer"
 msgid "If enabled, sets OrcaSlicer as default application to open .step files"
 msgstr "Om aktiverad, väljs Orca Slicer som standard att öppna .step filer"

-msgid "Online Models"
-msgstr "Online modeller"
-
-msgid "Show online staff-picked models on the home page"
-msgstr "Visa personalens utvalda modeller online på startsidan"
-
 msgid "Maximum recent projects"
 msgstr "Maximalt antal nyligen genomförda projekt"

@@ -5626,8 +5612,8 @@ msgstr "Det går inte att skicka utskriftsuppgiften när uppgraderingen pågår"
 msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr "Ett MicroSD-kort måste sättas i innan du skickar till skrivaren."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
-msgstr "Skrivaren måste finnas på samma LAN som Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
+msgstr "Skrivaren måste finnas på samma LAN som Orca Slicer."

 msgid "The printer does not support sending to printer SD card."
 msgstr "Skrivaren har inte stöd för att skicka till skrivarens MicroSD kort."
@@ -6101,6 +6087,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "Byta filament G-kod"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "Paus G-kod"

@@ -6714,7 +6703,7 @@ msgid "Network plug-in update"
 msgstr "Uppdatering av nätverks plugin"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""
 "Klicka på OK för att uppdatera Nätverks plugin programmet nästa gång Bambu "
 "Studio startar."
@@ -6723,8 +6712,8 @@ msgstr ""
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr "En ny nätverksplugin (%s) är tillgänglig. Vill du installera den?"

-msgid "New version of Bambu Studio"
-msgstr "Ny version av Bambu Studio"
+msgid "New version of Orca Slicer"
+msgstr "Ny version av Orca Slicer"

 msgid "Don't remind me of this version again"
 msgstr "Påminn mig inte om den här versionen igen."
@@ -6736,8 +6725,8 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "LAN-anslutning misslyckades (skickar utskriftsfil)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
-msgstr "Steg 1: Bekräfta att Bambu Studio och din skrivare finns på samma LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
+msgstr "Steg 1: Bekräfta att Orca Slicer och din skrivare finns på samma LAN."

 msgid ""
 "Step 2, if the IP and Access Code below are different from the actual values "
@@ -6811,7 +6800,7 @@ msgid ""
 msgstr ""
 "Firmware versionen är onormal. Reparation och uppdatering krävs före "
 "utskrift. Vill du uppdatera nu? Du kan också uppdatera senare på skrivaren "
-"eller uppdatera nästa gång du startar Bambu Studio."
+"eller uppdatera nästa gång du startar Orca Slicer."

 msgid "Extension Board"
 msgstr "Utöknings enhet"
@@ -7573,6 +7562,15 @@ msgstr ""
 "Minska detta värde något (tex 0.9) för att minska material åtgång för "
 "bridges/bryggor, detta för att förbättra kvaliteten"

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr ""

@@ -7865,6 +7863,15 @@ msgstr ""
 "sträckor men kan se sämre ut. Om de är inaktiverade ser bridges bättre ut "
 "men är tillförlitliga endast för kortare avstånd."

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Max bridge/brygg längd"

@@ -7886,6 +7893,16 @@ msgstr "Lägg till slut G-kod när utskriften har avslutas"
 msgid "End G-code when finish the printing of this filament"
 msgstr "Lägg till slut G-kod när utskriften har avslutas med detta filament"

+msgid "Ensure vertical shell thickness"
+msgstr "Säkerställ vertikal skaltjocklek"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Lägg till massiv fyllning nära sluttande ytor för att garantera den "
+"vertikala skal tjockleken (topp+bottenfasta lager)."
+
 msgid "Top surface pattern"
 msgstr "Topp ytans mönster"

@@ -9103,8 +9120,11 @@ msgstr ""
 msgid "Min print speed"
 msgstr "Min utskrifts hastighet"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "Min utskrifts hastighet vid nedsänkning för kylning"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""

 msgid "Nozzle diameter"
 msgstr "Nozzel diameter"
@@ -9363,22 +9383,6 @@ msgstr ""
 "den förflyttas. Att använda spirallinjer för att lyfta z kan förhindra "
 "strängning"

-msgid "Z hop lower boundary"
-msgstr ""
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-
-msgid "Z hop upper boundary"
-msgstr ""
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-
 msgid "Z hop type"
 msgstr ""

@@ -10091,6 +10095,9 @@ msgstr ""
 "G-koden sätts in vid filament byte, inklusive T kommando som aktiverar "
 "verktygs byte"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10451,6 +10458,19 @@ msgstr ""
 "elementet blir väggen lika tjock som själva elementet. Den uttrycks i "
 "procent av nozzel diametern."

+msgid "Detect narrow internal solid infill"
+msgstr "Upptäck tight inre solid ifyllnad"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Detta val kommer att auto upptäcka tight inre solid ifyllnads område. Om "
+"aktiverat kommer det koncentriska mönstret att användas för området för att "
+"påskynda utskriften. Annars kommer mönstret med räta linjer att användas som "
+"standard."
+
 msgid "invalid value "
 msgstr "ogiltigt värde "

@@ -11785,6 +11805,40 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr ""
+#~ "3mf:s version %s är nyare än %s version %s, Följande nycklar har hittats "
+#~ "som inte känns igen:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Uppdatera mjukvaran.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Nyare 3mf version"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "3mf:s version %s är nyare än %s version %s, Föreslår att du uppdaterar "
+#~ "din programvara."
+
+#~ msgid "Embeded"
+#~ msgstr "Inbäddad"
+
+#~ msgid "Online Models"
+#~ msgstr "Online modeller"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr "Visa personalens utvalda modeller online på startsidan"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr "Min utskrifts hastighet vid nedsänkning för kylning"
+
 #~ msgid ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clog."
@@ -11793,16 +11847,6 @@ msgstr ""
 #~ "Öppna skrivarens främre dörr innan du skriver ut för att undvika att "
 #~ "nozzeln täpps till."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Säkerställ vertikal skaltjocklek"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Lägg till massiv fyllning nära sluttande ytor för att garantera den "
-#~ "vertikala skal tjockleken (topp+bottenfasta lager)."
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Kristalliserings temperatur"

@@ -11825,19 +11869,6 @@ msgstr ""
 #~ "denna hastighet under utskrift förutom de lager som definieras som inga "
 #~ "kyl lager"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Upptäck tight inre solid ifyllnad"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Detta val kommer att auto upptäcka tight inre solid ifyllnads område. Om "
-#~ "aktiverat kommer det koncentriska mönstret att användas för området för "
-#~ "att påskynda utskriften. Annars kommer mönstret med räta linjer att "
-#~ "användas som standard."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr "Tomma lager runt botten ersätts med närmast normala lager."

--- a/localization/i18n/tr/OrcaSlicer_tr.po
+++ b/localization/i18n/tr/OrcaSlicer_tr.po
--- a/localization/i18n/uk/OrcaSlicer_uk.po
+++ b/localization/i18n/uk/OrcaSlicer_uk.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: 2023-08-10 20:25-0400\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -495,27 +495,12 @@ msgstr "Малювання шва"
 msgid "Remove selection"
 msgstr "Видалити виділення"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + переміщення миші вгору або вниз"
-
-msgid "Rotate text"
-msgstr "Повернути текст"
-
-msgid "Text shape"
-msgstr "Форма тексту"
-
 msgid "Font"
 msgstr "Шрифт"

 msgid "Thickness"
 msgstr "Товщина"

-msgid "Input text"
-msgstr "Введення тексту"
-
-msgid "Embeded"
-msgstr "Вбудовано"
-
 msgid "Text Gap"
 msgstr "Пробіл у тексті"

@@ -527,12 +512,24 @@ msgid ""
 "depth"
 msgstr "Вбудована глибина"

+msgid "Input text"
+msgstr "Введення тексту"
+
 msgid "Surface"
 msgstr "Поверхня"

 msgid "Horizontal text"
 msgstr "Горизонтальний текст"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + переміщення миші вгору або вниз"
+
+msgid "Rotate text"
+msgstr "Повернути текст"
+
+msgid "Text shape"
+msgstr "Форма тексту"
+
 msgid "Ctrl+"
 msgstr "Ctrl+"

@@ -621,13 +618,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr ""

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"Файл конфігурації OrcaSlicer може бути пошкоджений і не підлягає розбору. "
-"Видаліть файл і спробуйте ще раз."
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -653,6 +643,13 @@ msgstr "Це найновіша версія."
 msgid "Info"
 msgstr "Інформація"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "Відновити"

@@ -3762,7 +3759,7 @@ msgstr "Завантаження інструментів віртуальної

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""

@@ -3874,7 +3871,7 @@ msgid "Failed to parse model infomations."
 msgstr ""

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""

@@ -4589,26 +4586,6 @@ msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr ""
 "3mf генерується старим слайсером Orca, завантажувати лише дані геометрії."

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr "Версія 3mf %s новіша, ніж версія %s %s, знайдено наступні ключі:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "Вам краще оновити програмне забезпечення.\n"
-
-msgid "Newer 3mf version"
-msgstr "Нова версія 3mf"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr ""
-"Версія 3mf %s новіша, ніж версія %s %s, запропонуйте оновити програмне "
-"забезпечення."
-
 msgid "Invalid values found in the 3mf:"
 msgstr "У 3mf знайдено неприпустимі значення:"

@@ -4815,7 +4792,7 @@ msgid "Project downloaded %d%%"
 msgstr "Проект завантажено %d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -5048,6 +5025,15 @@ msgstr "Імперський"
 msgid "Units"
 msgstr "Одиниці"

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr "Наблизити до положення миші"

@@ -5063,6 +5049,12 @@ msgstr ""
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""

+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "Показувати повідомлення \"Рада дня\" після запуску"

@@ -5121,12 +5113,6 @@ msgstr ""
 "Якщо включено, встановлює OrcaSlicer як програму за замовчуваннямдля "
 "відкриття файлів .step"

-msgid "Online Models"
-msgstr ""
-
-msgid "Show online staff-picked models on the home page"
-msgstr ""
-
 msgid "Maximum recent projects"
 msgstr "Максимум останніх проектів"

@@ -5684,7 +5670,7 @@ msgstr "Не вдалося надіслати завдання на друк п
 msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr "Перед надсиланням на картку SD принтера необхідно вставити картку SD."

-msgid "The printer is required to be in the same LAN as Bambu Studio."
+msgid "The printer is required to be in the same LAN as Orca Slicer."
 msgstr ""

 msgid "The printer does not support sending to printer SD card."
@@ -6144,6 +6130,9 @@ msgstr ""
 msgid "Change filament G-code"
 msgstr "G-code Зміни філаменту"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "G-code Паузи"

@@ -6757,14 +6746,14 @@ msgid "Network plug-in update"
 msgstr "Оновлення мережевого плагіна"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
 msgstr ""

 #, c-format, boost-format
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr "Доступний новий мережевий плагін (%s), чи хочете ви встановити його?"

-msgid "New version of Bambu Studio"
+msgid "New version of Orca Slicer"
 msgstr ""

 msgid "Don't remind me of this version again"
@@ -6777,7 +6766,7 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "Помилка з’єднання LAN (Надсилання файлу друку)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
 msgstr ""

 msgid ""
@@ -7633,6 +7622,15 @@ msgstr ""
 "Трохи зменшіть це значення (наприклад, 0.9), щоб зменшити кількість "
 "матеріалу для мосту, щоб покращити провисання"

+msgid "Internal bridge flow"
+msgstr ""
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "Коефіцієнт потоку верхньої поверхні"

@@ -7934,6 +7932,15 @@ msgstr ""
 "великівідстань, але можуть виглядати гірше. Якщо відключити, мости "
 "виглядають краще,Але надійні лише для більш коротких мостових відстаней."

+msgid "Thick internal bridges"
+msgstr ""
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "Максимальна довжина мосту"

@@ -7955,6 +7962,16 @@ msgstr "Завершальний G-code, коли закінчити весь д
 msgid "End G-code when finish the printing of this filament"
 msgstr "Завершальний G-code, коли закінчите друк цієї нитки"

+msgid "Ensure vertical shell thickness"
+msgstr "Забезпечення вертикальної товщини оболонки"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr ""
+"Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії "
+"товщини вертикальної оболонки (верхній + нижній шари твердого тіла)"
+
 msgid "Top surface pattern"
 msgstr "Малюнок верхньої поверхні"

@@ -9258,8 +9275,11 @@ msgstr ""
 msgid "Min print speed"
 msgstr "Мін. швидкість друку"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "Мінімальна швидкість друку при уповільненні для охолодження"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""

 msgid "Nozzle diameter"
 msgstr "Діаметр сопла"
@@ -9517,22 +9537,6 @@ msgstr ""
 "переміщення. Використання спіралевої лінії підняття по осі Z може "
 "перешкоджати появі висячих ниток"

-msgid "Z hop lower boundary"
-msgstr ""
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr ""
-
-msgid "Z hop upper boundary"
-msgstr ""
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr ""
-
 msgid "Z hop type"
 msgstr "Тип Z-стрибка"

@@ -10273,6 +10277,9 @@ msgstr ""
 "Цей gcode вставляється при зміні філаменту, включаючи команду T для запуску "
 "зміни інструменту"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -10625,6 +10632,19 @@ msgstr ""
 "елемента, то товщина периметра дорівнюватиме товщині самого елемента. Він "
 "виражається у відсотках від діаметра сопла"

+msgid "Detect narrow internal solid infill"
+msgstr "Виявлення вузького внутрішнього заповнення твердим тілом"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"Ця опція автоматично визначає вузьку внутрішню область заповненнятвердого "
+"тіла. Якщо цей параметр увімкнено, для прискорення друку області "
+"використовуватиметься концентричний візерунок. Інакше за умовчанням "
+"Використовується прямолінійний малюнок."
+
 msgid "invalid value "
 msgstr "неправильне значення "

@@ -11974,6 +11994,39 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr "Версія 3mf %s новіша, ніж версія %s %s, знайдено наступні ключі:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "Вам краще оновити програмне забезпечення.\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "Нова версія 3mf"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr ""
+#~ "Версія 3mf %s новіша, ніж версія %s %s, запропонуйте оновити програмне "
+#~ "забезпечення."
+
+#~ msgid "Embeded"
+#~ msgstr "Вбудовано"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "Файл конфігурації OrcaSlicer може бути пошкоджений і не підлягає розбору. "
+#~ "Видаліть файл і спробуйте ще раз."
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr "Мінімальна швидкість друку при уповільненні для охолодження"
+
 #~ msgid ""
 #~ "The bed temperature exceeds filament's vitrification temperature. Please "
 #~ "open the front door of printer before printing to avoid nozzle clog."
@@ -11982,16 +12035,6 @@ msgstr ""
 #~ "відчиняйте передні дверцята принтера перед печаткою, щоб уникнути "
 #~ "засмічення сопла."

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "Забезпечення вертикальної товщини оболонки"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr ""
-#~ "Додавання заповнення твердого тіла поблизу похилих поверхонь для Гарантії "
-#~ "товщини вертикальної оболонки (верхній + нижній шари твердого тіла)"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "Температура склування"

@@ -12016,19 +12059,6 @@ msgstr ""
 #~ "ДопоміжнийВентилятор буде працювати з такою швидкістю під час друку, за "
 #~ "винятком перших кількох шарів, які не визначаються шарами охолодження"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "Виявлення вузького внутрішнього заповнення твердим тілом"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "Ця опція автоматично визначає вузьку внутрішню область заповненнятвердого "
-#~ "тіла. Якщо цей параметр увімкнено, для прискорення друку області "
-#~ "використовуватиметься концентричний візерунок. Інакше за умовчанням "
-#~ "Використовується прямолінійний малюнок."
-
 #~ msgid "Empty layers around bottom are replaced by nearest normal layers."
 #~ msgstr ""
 #~ "Порожні шари навколо дна замінюються найближчими нормальними шарами."
--- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
+++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-24 19:49+0800\n"
+"POT-Creation-Date: 2023-12-02 01:44+0800\n"
 "PO-Revision-Date: 2023-04-01 13:21+0800\n"
 "Last-Translator: SoftFever <softfeverever@gmail.com>\n"
 "Language-Team: \n"
@@ -491,27 +491,12 @@ msgstr "Z缝绘制"
 msgid "Remove selection"
 msgstr "移除绘制"

-msgid "Shift + Mouse move up or dowm"
-msgstr "Shift + 鼠标上移或下移"
-
-msgid "Rotate text"
-msgstr "旋转文字"
-
-msgid "Text shape"
-msgstr "文本形状"
-
 msgid "Font"
 msgstr "字体"

 msgid "Thickness"
 msgstr "厚度"

-msgid "Input text"
-msgstr "输入文本"
-
-msgid "Embeded"
-msgstr "嵌入的"
-
 msgid "Text Gap"
 msgstr "文字间距"

@@ -523,12 +508,24 @@ msgid ""
 "depth"
 msgstr "内嵌深度"

+msgid "Input text"
+msgstr "输入文本"
+
 msgid "Surface"
 msgstr "附着曲面"

 msgid "Horizontal text"
 msgstr "水平文字"

+msgid "Shift + Mouse move up or dowm"
+msgstr "Shift + 鼠标上移或下移"
+
+msgid "Rotate text"
+msgstr "旋转文字"
+
+msgid "Text shape"
+msgstr "文本形状"
+
 msgid "Ctrl+"
 msgstr ""

@@ -614,12 +611,6 @@ msgstr ""
 msgid "WebView2 Runtime"
 msgstr "WebView2 运行库"

-msgid ""
-"OrcaSlicer configuration file may be corrupted and is not abled to be parsed."
-"Please delete the file and try again."
-msgstr ""
-"OrcaSlicer 配置文件可能已损坏而无法解析。请删除此文件并重新启动OrcaSlicer。"
-
 #, c-format, boost-format
 msgid ""
 "%s\n"
@@ -645,6 +636,13 @@ msgstr "已经是最新版本。"
 msgid "Info"
 msgstr "信息"

+msgid ""
+"The OrcaSlicer configuration file may be corrupted and cannot be parsed.\n"
+"OrcaSlicer has attempted to recreate the configuration file.\n"
+"Please note, application settings will be lost, but printer profiles will "
+"not be affected."
+msgstr ""
+
 msgid "Rebuild"
 msgstr "重新构建"

@@ -3619,11 +3617,11 @@ msgstr "正在下载“虚拟摄像头工具包”"

 msgid ""
 "Another virtual camera is running.\n"
-"Bambu Studio supports only a single virtual camera.\n"
+"Orca Slicer supports only a single virtual camera.\n"
 "Do you want to stop this virtual camera?"
 msgstr ""
 "另一个虚拟摄像头正在工作。\n"
-"Bambu Studio 同时只能支持一个虚拟摄像头。\n"
+"Orca Slicer 同时只能支持一个虚拟摄像头。\n"
 "是否停止前一个虚拟摄像头？"

 #, c-format, boost-format
@@ -3732,10 +3730,10 @@ msgid "Failed to parse model infomations."
 msgstr "解析模型信息失败。"

 msgid ""
-"The .gcode.3mf file contains no G-code data.Please slice it whthBambu Studio "
+"The .gcode.3mf file contains no G-code data.Please slice it with Orca Slicer "
 "and export a new .gcode.3mf file."
 msgstr ""
-".gcode.3mf文件中不包含G-code数据。请使用Bambu Studio进行切片并导出新的."
+".gcode.3mf文件中不包含G-code数据。请使用Orca Slicer进行切片并导出新的."
 "gcode.3mf文件。"

 #, c-format, boost-format
@@ -4427,24 +4425,6 @@ msgstr "配置无法加载。"
 msgid "The 3mf is generated by old Orca Slicer, load geometry data only."
 msgstr "该3mf文件来自旧版本的逆戟鲸切片，将只加载几何数据。"

-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Found following keys "
-"unrecognized:"
-msgstr "该3mf的版本%s比%s的版本%s新，发现以下参数键值无法识别:"
-
-msgid "You'd better upgrade your software.\n"
-msgstr "建议升级您的软件版本。\n"
-
-msgid "Newer 3mf version"
-msgstr "较新的3mf版本"
-
-#, c-format, boost-format
-msgid ""
-"The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
-"software."
-msgstr "该3mf的版本%s比%s的版本%s要新，建议升级你的软件。"
-
 msgid "Invalid values found in the 3mf:"
 msgstr "在3mf文件中发现无效值："

@@ -4639,7 +4619,7 @@ msgid "Project downloaded %d%%"
 msgstr "项目已下载%d%%"

 msgid ""
-"Importing to Bambu Studio failed. Please download the file and manually "
+"Importing to Orca Slicer failed. Please download the file and manually "
 "import it."
 msgstr ""

@@ -4865,6 +4845,15 @@ msgstr "英制"
 msgid "Units"
 msgstr "单位"

+msgid "Home"
+msgstr ""
+
+msgid "Default Page"
+msgstr ""
+
+msgid "Set the page opened on startup."
+msgstr ""
+
 msgid "Zoom to mouse position"
 msgstr "放大到鼠标位置"

@@ -4879,6 +4868,12 @@ msgstr "使用自由视角"
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr "如果启用，使用自由视角。如果未启用，使用约束视角。"

+msgid "Show splash screen"
+msgstr ""
+
+msgid "Show the splash screen during startup."
+msgstr ""
+
 msgid "Show \"Tip of the day\" notification after start"
 msgstr "启动后显示“每日小贴士”通知"

@@ -4930,12 +4925,6 @@ msgstr "使用逆戟鲸打开.step/.stp文件"
 msgid "If enabled, sets OrcaSlicer as default application to open .step files"
 msgstr "开启后，将缺省使用逆戟鲸打开.step文件"

-msgid "Online Models"
-msgstr "在线模型"
-
-msgid "Show online staff-picked models on the home page"
-msgstr "在主页上显示工作人员挑选的在线模型"
-
 msgid "Maximum recent projects"
 msgstr "近期项目的最大数量"

@@ -5477,8 +5466,8 @@ msgstr "设备升级中，无法发送打印任务"
 msgid "An SD card needs to be inserted before send to printer SD card."
 msgstr "发送到打印机需要插入SD卡"

-msgid "The printer is required to be in the same LAN as Bambu Studio."
-msgstr "打印机需要与Bambu Studio在同一个局域网内。"
+msgid "The printer is required to be in the same LAN as Orca Slicer."
+msgstr "打印机需要与Orca Slicer在同一个局域网内。"

 msgid "The printer does not support sending to printer SD card."
 msgstr "该打印机不支持发送到打印机SD卡。"
@@ -5916,6 +5905,9 @@ msgstr "延时摄影G-code"
 msgid "Change filament G-code"
 msgstr "耗材丝更换G-code"

+msgid "Change extrusion role G-code"
+msgstr ""
+
 msgid "Pause G-code"
 msgstr "暂停 G-code"

@@ -6518,15 +6510,15 @@ msgid "Network plug-in update"
 msgstr "网络插件升级"

 msgid ""
-"Click OK to update the Network plug-in when Bambu Studio launches next time."
-msgstr "点击\"确定\"，将在Bambu Studio下次启动之后自动升级网络插件"
+"Click OK to update the Network plug-in when Orca Slicer launches next time."
+msgstr "点击\"确定\"，将在Orca Slicer下次启动之后自动升级网络插件"

 #, c-format, boost-format
 msgid "A new Network plug-in(%s) available, Do you want to install it?"
 msgstr "新的网络插件(%s) 可用，您是否需要安装它？"

-msgid "New version of Bambu Studio"
-msgstr "新版本的Bambu Studio"
+msgid "New version of Orca Slicer"
+msgstr "新版本的Orca Slicer"

 msgid "Don't remind me of this version again"
 msgstr "此版本不再提示"
@@ -6538,8 +6530,8 @@ msgid "LAN Connection Failed (Sending print file)"
 msgstr "LAN连接失败 (发送打印文件)"

 msgid ""
-"Step 1, please confirm Bambu Studio and your printer are in the same LAN."
-msgstr "第1步，请确认Bambu Studio和您的打印机在同一个LAN上。"
+"Step 1, please confirm Orca Slicer and your printer are in the same LAN."
+msgstr "第1步，请确认Orca Slicer和您的打印机在同一个LAN上。"

 msgid ""
 "Step 2, if the IP and Access Code below are different from the actual values "
@@ -7313,6 +7305,15 @@ msgid ""
 "material for bridge, to improve sag"
 msgstr "稍微减小这个数值（比如0.9）可以减小桥接的材料量，来改善下垂。"

+msgid "Internal bridge flow"
+msgstr "内部桥接流量"
+
+msgid ""
+"This value governs the thickness of the internal bridge layer. This is the "
+"first layer over sparse infill. Decrease this value slightly (for example "
+"0.9) to improve surface quality over sparse infill."
+msgstr ""
+
 msgid "Top surface flow ratio"
 msgstr "顶部表面流量比例"

@@ -7346,6 +7347,7 @@ msgstr "顶面只使用单层墙，从而更多的空间能够使用顶部填充
 msgid "One wall threshold"
 msgstr "单层墙阈值"

+#, fuzzy, c-format, boost-format
 msgid ""
 "If a top surface has to be printed and it's partially covered by another "
 "layer, it won't be considered at a top layer where its width is below this "
@@ -7356,9 +7358,9 @@ msgid ""
 "on the next layer, like letters. Set this setting to 0 to remove these "
 "artifacts."
 msgstr ""
-"如果顶面需要打印，但是它的一部分被其它层覆盖，那么当它的宽度小于这个值时，它不"
-"会被认为是顶层。这个设置可以用于避免在狭窄顶面上触发“顶面单层墙”"
-"。这个值可以是毫米或线宽的百分比。\n"
+"如果顶面需要打印，但是它的一部分被其它层覆盖，那么当它的宽度小于这个值时，它"
+"不会被认为是顶层。这个设置可以用于避免在狭窄顶面上触发“顶面单层墙”。这个值可"
+"以是毫米或线宽的百分比。\n"
 "警告：如果启用，可能会在下一层上产生一些薄的特征，比如字母。将此设置设置为0可"
 "以消除这些伪影。"

@@ -7389,9 +7391,8 @@ msgid ""
 "direction on odd layers. This alternating pattern can drastically improve "
 "steep overhang."
 msgstr ""
-"在奇数层，将悬垂的打印方向反转。"
-"这种交替的模式可以大大改善陡峭悬垂的打印质量。"
-
+"在奇数层，将悬垂的打印方向反转。这种交替的模式可以大大改善陡峭悬垂的打印质"
+"量。"

 msgid "Reverse threshold"
 msgstr "反转阈值"
@@ -7399,12 +7400,12 @@ msgstr "反转阈值"
 msgid "Overhang reversal threshold"
 msgstr "悬垂反转阈值"

+#, fuzzy, c-format, boost-format
 msgid ""
 "Number of mm the overhang need to be for the reversal to be considered "
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every odd layers regardless."
-msgstr ""
-"判定悬垂反转需要的值（毫米），可以是线宽的百分比。"
+msgstr "判定悬垂反转需要的值（毫米），可以是线宽的百分比。"

 msgid "Classic mode"
 msgstr "经典模式"
@@ -7607,6 +7608,15 @@ msgstr ""
 "如果启用，桥接会更可靠，可以桥接更长的距离，但可能看起来更糟。如果关闭，桥梁"
 "看起来更好，但只适用于较短的桥接距离。"

+msgid "Thick internal bridges"
+msgstr "厚内部桥"
+
+msgid ""
+"If enabled, thick internal bridges will be used. It's usually recommended to "
+"have this feature turned on. However, consider turning it off if you are "
+"using large nozzles."
+msgstr ""
+
 msgid "Max bridge length"
 msgstr "最大桥接长度"

@@ -7627,6 +7637,14 @@ msgstr "所有打印结束时的结尾G-code"
 msgid "End G-code when finish the printing of this filament"
 msgstr "结束使用该耗材打印时的结尾G-code"

+msgid "Ensure vertical shell thickness"
+msgstr "确保垂直外壳厚度"
+
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)"
+msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）"
+
 msgid "Top surface pattern"
 msgstr "顶面图案"

@@ -8840,8 +8858,11 @@ msgstr "挤出头最小可打印的层高。用于限制开启自适应层高时
 msgid "Min print speed"
 msgstr "最小打印速度"

-msgid "The minimum printing speed when slow down for cooling"
-msgstr "自动冷却降速的最小打印速度"
+msgid ""
+"The minimum printing speed for the filament when slow down for better layer "
+"cooling is enabled, when printing overhangs and when feature speeds are not "
+"specified explicitly."
+msgstr ""

 msgid "Nozzle diameter"
 msgstr "喷嘴直径"
@@ -9092,22 +9113,6 @@ msgstr ""
 "回抽完成之后，喷嘴轻微抬升，和打印件之间产生一定间隙。这能够避免空驶时喷嘴和"
 "打印件剐蹭和碰撞。使用螺旋线抬升z能够减少拉丝。"

-msgid "Z hop lower boundary"
-msgstr "Z抬升下边界"
-
-msgid ""
-"Z hop will only come into effect when Z is above this value and is below the "
-"parameter: \"Z hop upper boundary\""
-msgstr "只有当Z高于此值且低于参数(Z抬升上边界)时，Z抬升才会生效"
-
-msgid "Z hop upper boundary"
-msgstr "Z抬升上边界"
-
-msgid ""
-"If this value is positive, Z hop will only come into effect when Z is above "
-"the parameter: \"Z hop lower boundary\" and is below this value"
-msgstr "如果该值为正，则Z抬升仅在Z高于参数(Z抬升下边界)且低于该值时才会生效"
-
 msgid "Z hop type"
 msgstr "抬Z类型"

@@ -9800,6 +9805,9 @@ msgid ""
 "tool change"
 msgstr "换料时插入的G-code，包括T命令。"

+msgid "This gcode is inserted when the extrusion role is changed"
+msgstr ""
+
 msgid ""
 "Line width for top surfaces. If expressed as a %, it will be computed over "
 "the nozzle diameter."
@@ -9992,13 +10000,14 @@ msgid ""
 "compute the polyhole.\n"
 "See http://hydraraptor.blogspot.com/2011/02/polyholes.html"
 msgstr ""
-"搜索跨越多层的近似圆形孔，并将几何形状转换为多边形孔。使用喷嘴尺寸和（最大）直"
-"径来计算多边形孔。\n"
+"搜索跨越多层的近似圆形孔，并将几何形状转换为多边形孔。使用喷嘴尺寸和（最大）"
+"直径来计算多边形孔。\n"
 "参见http://hydraraptor.blogspot.com/2011/02/polyholes.html"

 msgid "Polyhole detection margin"
 msgstr "多边型孔检测边缘"

+#, fuzzy, c-format, boost-format
 msgid ""
 "Maximum defection of a point to the estimated radius of the circle.\n"
 "As cylinders are often exported as triangles of varying size, points may not "
@@ -10008,11 +10017,9 @@ msgid ""
 msgstr ""
 "点到圆半径的最大偏差。\n"
 "由于圆柱体通常被导出为大小不同的三角形，因此点可能不在圆周上。\n"
-"此设置允许您"
-"有一些余地来扩大检测范围。\n"
+"此设置允许您有一些余地来扩大检测范围。\n"
 "以毫米或半径的百分比表示。"

-
 msgid "Polyhole twist"
 msgstr "扭曲多边型孔"

@@ -10026,9 +10033,7 @@ msgid ""
 "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the "
 "following format: \"XxY, XxY, ...\""
 msgstr ""
-"将被存储到.gcode和.sl1/.sl1s文件中的图片尺寸，"
-"格式如下：\"XxY, XxY, ...\""
-
+"将被存储到.gcode和.sl1/.sl1s文件中的图片尺寸，格式如下：\"XxY, XxY, ...\""

 msgid "Format of G-code thumbnails"
 msgstr "G-code缩略图的格式"
@@ -10148,6 +10153,17 @@ msgstr ""
 "用于替换模型细小特征（根据最小特征尺寸）的墙线宽。如果墙最小线宽小于最小特征"
 "的厚度，则墙将变得和特征本身一样厚。参数值表示为相对喷嘴直径的百分比"

+msgid "Detect narrow internal solid infill"
+msgstr "识别狭窄内部实心填充"
+
+msgid ""
+"This option will auto detect narrow internal solid infill area. If enabled, "
+"concentric pattern will be used for the area to speed printing up. "
+"Otherwise, rectilinear pattern is used defaultly."
+msgstr ""
+"此选项用于自动识别内部狭窄的实心填充。开启后，将对狭窄实心区域使用同心填充加"
+"快打印速度。否则使用默认的直线填充。"
+
 msgid "invalid value "
 msgstr "非法的值 "

@@ -11529,6 +11545,59 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
+#~ "unrecognized:"
+#~ msgstr "该3mf的版本%s比%s的版本%s新，发现以下参数键值无法识别:"
+
+#~ msgid "You'd better upgrade your software.\n"
+#~ msgstr "建议升级您的软件版本。\n"
+
+#~ msgid "Newer 3mf version"
+#~ msgstr "较新的3mf版本"
+
+#, c-format, boost-format
+#~ msgid ""
+#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
+#~ "your software."
+#~ msgstr "该3mf的版本%s比%s的版本%s要新，建议升级你的软件。"
+
+#~ msgid "Embeded"
+#~ msgstr "嵌入的"
+
+#~ msgid ""
+#~ "OrcaSlicer configuration file may be corrupted and is not abled to be "
+#~ "parsed.Please delete the file and try again."
+#~ msgstr ""
+#~ "OrcaSlicer 配置文件可能已损坏而无法解析。请删除此文件并重新启动"
+#~ "OrcaSlicer。"
+
+#~ msgid "Online Models"
+#~ msgstr "在线模型"
+
+#~ msgid "Show online staff-picked models on the home page"
+#~ msgstr "在主页上显示工作人员挑选的在线模型"
+
+#~ msgid "Z hop lower boundary"
+#~ msgstr "Z抬升下边界"
+
+#~ msgid ""
+#~ "Z hop will only come into effect when Z is above this value and is below "
+#~ "the parameter: \"Z hop upper boundary\""
+#~ msgstr "只有当Z高于此值且低于参数(Z抬升上边界)时，Z抬升才会生效"
+
+#~ msgid "Z hop upper boundary"
+#~ msgstr "Z抬升上边界"
+
+#~ msgid ""
+#~ "If this value is positive, Z hop will only come into effect when Z is "
+#~ "above the parameter: \"Z hop lower boundary\" and is below this value"
+#~ msgstr "如果该值为正，则Z抬升仅在Z高于参数(Z抬升下边界)且低于该值时才会生效"
+
+#~ msgid "The minimum printing speed when slow down for cooling"
+#~ msgstr "自动冷却降速的最小打印速度"
+
 #~ msgid ""
 #~ "There are currently no identical spare consumables available, and "
 #~ "automatic replenishment is currently not possible. \n"
@@ -11549,14 +11618,6 @@ msgstr ""
 #~ msgid "Activate for better air filtration"
 #~ msgstr "激活以获得更好的空气过滤"

-#~ msgid "Ensure vertical shell thickness"
-#~ msgstr "确保垂直外壳厚度"
-
-#~ msgid ""
-#~ "Add solid infill near sloping surfaces to guarantee the vertical shell "
-#~ "thickness (top+bottom solid layers)"
-#~ msgstr "在斜面表面附近添加实心填充，以保证垂直外壳厚度（顶部+底部实心层）"
-
 #~ msgid "Temperature of vitrificaiton"
 #~ msgstr "软化温度"

@@ -11583,17 +11644,6 @@ msgstr ""
 #~ "辅助部件冷却风扇的转速。辅助部件冷却风扇将一直运行在该速度，除了设置的无需"
 #~ "冷却的前若干层"

-#~ msgid "Detect narrow internal solid infill"
-#~ msgstr "识别狭窄内部实心填充"
-
-#~ msgid ""
-#~ "This option will auto detect narrow internal solid infill area. If "
-#~ "enabled, concentric pattern will be used for the area to speed printing "
-#~ "up. Otherwise, rectilinear pattern is used defaultly."
-#~ msgstr ""
-#~ "此选项用于自动识别内部狭窄的实心填充。开启后，将对狭窄实心区域使用同心填充"
-#~ "加快打印速度。否则使用默认的直线填充。"
-
 #~ msgid ""
 #~ "Filter out gaps smaller than the threshold specified. This setting won't "
 #~ "affect top/bottom layers"
--- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
+++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
--- a/resources/calib/pressure_advance/pa_pattern.3mf
+++ b/resources/calib/pressure_advance/pa_pattern.3mf
--- a/resources/calib/pressure_advance/pressure_advance_test.stl
+++ b/resources/calib/pressure_advance/pressure_advance_test.stl
--- a/resources/calib/pressure_advance/tower_with_seam.stl
+++ b/resources/calib/pressure_advance/tower_with_seam.stl
--- a/resources/calib/volumetric_speed/SpeedTestStructure.step
+++ b/resources/calib/volumetric_speed/SpeedTestStructure.step
--- a/resources/profiles/Anker.json
+++ b/resources/profiles/Anker.json
@@ -1,6 +1,6 @@
 {
    "name": "Anker",
-    "version": "01.06.04.00",
+    "version": "01.08.00.00",
    "force_update": "0",
    "description": "Anker configurations",
    "machine_model_list": [
--- a/resources/profiles/Anker/machine/Anker
+++ b/resources/profiles/Anker/machine/Anker
@@ -8,5 +8,8 @@
    "bed_model": "M5-CE-bed.stl",
    "bed_texture": "M5-CE-texture.svg",
    "hotend_model": "",
-    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA"
+    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA",
+    "retraction_length": [
+        "1.5"
+    ]
 }
--- a/resources/profiles/Anker/machine/Anker
+++ b/resources/profiles/Anker/machine/Anker
@@ -8,5 +8,8 @@
    "bed_model": "M5C-CE-bed.stl",
    "bed_texture": "M5-CE-texture.svg",
    "hotend_model": "",
-    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA;Anker Generic PC;Anker Generic PA;Anker Generic PA-CF"
+    "default_materials": "Anker Generic ABS;Anker Generic PLA;Anker Generic PLA-CF;Anker Generic PETG;Anker Generic TPU;Anker Generic ASA;Anker Generic PVA;Anker Generic PC;Anker Generic PA;Anker Generic PA-CF",
+    "retraction_length": [
+        "0.8"
+    ]
 }
--- a/resources/profiles/Anker/machine/fdm_machine_common.json
+++ b/resources/profiles/Anker/machine/fdm_machine_common.json
@@ -3,7 +3,7 @@
    "name": "fdm_machine_common",
    "from": "system",
    "instantiation": "false",
-    "gcode_flavor": "marlin",
+    "gcode_flavor": "marlin2",
   	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
    "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 Sfirst_layer_temperature[0] ; Set hotend temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
@@ -88,9 +88,6 @@
    "retract_when_changing_layer": [
        "0"
    ],
-    "retraction_length": [
-        "1.5"
-    ],
    "retract_length_toolchange": [
        "2"
    ],
--- a/resources/profiles/Anycubic.json
+++ b/resources/profiles/Anycubic.json
@@ -1,6 +1,6 @@
 {
    "name": "Anycubic",
-    "version": "01.06.00.00",
+    "version": "01.08.00.00",
    "force_update": "0",
    "description": "Anycubic configurations",
    "machine_model_list": [
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.15mm
+++ b/resources/profiles/Anycubic/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.20mm
+++ b/resources/profiles/Anycubic/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/0.30mm
+++ b/resources/profiles/Anycubic/process/0.30mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Anycubic/process/fdm_process_common.json
+++ b/resources/profiles/Anycubic/process/fdm_process_common.json
@@ -41,7 +41,7 @@
    "ironing_speed": "30",
    "ironing_type": "no ironing",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
--- a/resources/profiles/Artillery.json
+++ b/resources/profiles/Artillery.json
@@ -1,6 +1,6 @@
 {
    "name": "Artillery",
-    "version": "01.06.04.00",
+    "version": "01.08.00.00",
    "force_update": "0",
    "description": "Artillery configurations",
    "machine_model_list": [
--- a/resources/profiles/Artillery/process/0.15mm
+++ b/resources/profiles/Artillery/process/0.15mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.16mm
+++ b/resources/profiles/Artillery/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.16mm
+++ b/resources/profiles/Artillery/process/0.16mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.20mm
+++ b/resources/profiles/Artillery/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.20mm
+++ b/resources/profiles/Artillery/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.20mm
+++ b/resources/profiles/Artillery/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.20mm
+++ b/resources/profiles/Artillery/process/0.20mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.24mm
+++ b/resources/profiles/Artillery/process/0.24mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.24mm
+++ b/resources/profiles/Artillery/process/0.24mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/0.25mm
+++ b/resources/profiles/Artillery/process/0.25mm
@@ -44,7 +44,7 @@
 	"ironing_speed": "15",
 	"ironing_type": "no ironing",
 	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
 	"detect_overhang_wall": "1",
 	"overhang_1_4_speed": "0",
 	"overhang_2_4_speed": "20",
--- a/resources/profiles/Artillery/process/fdm_process_common.json
+++ b/resources/profiles/Artillery/process/fdm_process_common.json
@@ -41,7 +41,7 @@
    "ironing_speed": "30",
    "ironing_type": "no ironing",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
    "name": "Bambulab",
    "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.07.00.29",
+    "version": "01.07.00.30",
    "force_update": "0",
    "description": "the initial version of BBL configurations",
    "machine_model_list": [
--- a/resources/profiles/BBL/filament/fdm_filament_abs.json
+++ b/resources/profiles/BBL/filament/fdm_filament_abs.json
@@ -5,7 +5,7 @@
    "from": "system",
    "instantiation": "false",
    "activate_air_filtration": [
-        "1"
+        "0"
    ],
    "cool_plate_temp": [
        "0"
--- a/resources/profiles/BBL/filament/fdm_filament_asa.json
+++ b/resources/profiles/BBL/filament/fdm_filament_asa.json
@@ -5,7 +5,7 @@
    "from": "system",
    "instantiation": "false",
    "activate_air_filtration": [
-        "1"
+        "0"
    ],
    "cool_plate_temp": [
        "0"
--- a/resources/profiles/BBL/process/fdm_process_bbl_common.json
+++ b/resources/profiles/BBL/process/fdm_process_bbl_common.json
@@ -29,7 +29,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "50",
--- a/resources/profiles/BIQU.json
+++ b/resources/profiles/BIQU.json
@@ -1,6 +1,6 @@
 {
    "name": "BIQU",
-    "version": "01.06.00.00",
+    "version": "01.08.00.00",
    "force_update": "0",
    "description": "BIQU configurations",
    "machine_model_list": [
--- a/resources/profiles/BIQU/machine/BIQU
+++ b/resources/profiles/BIQU/machine/BIQU
@@ -81,6 +81,6 @@
 "retraction_speed": [
    "70"
 ],
-"machine_start_gcode": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0}; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0}; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S{material_print_temperature_layer_0}; Set Extruder temperature\nG92 E0; Reset Extruder\nM117 Homing axes\nG28; Home all axes\nM109 S{material_print_temperature_layer_0}; Wait for Extruder temperature\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
-"machine_end_gcode": ";BIQU B1 Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{machine_depth};\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
+"machine_start_gcode": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S[first_layer_bed_temperature]; Set Heat Bed temperature\nM190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature\nM117 Getting the extruder up to temp!\nM104 S[first_layer_temperature]; Set Extruder temperature\nG92 E0; Reset Extruder\nM117 Homing axes\nG28; Home all axes\nM109 S[first_layer_temperature]; Wait for Extruder temperature\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
+"machine_end_gcode": ";BIQU B1 Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]};\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
 }
--- a/resources/profiles/BIQU/machine/BIQU
+++ b/resources/profiles/BIQU/machine/BIQU
@@ -81,6 +81,6 @@
 "retraction_speed": [
    "40"
 ],
-"machine_start_gcode": "; BIQU BX Start G-code\n;M117 Initial homing sequence; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140; Set Extruder temperature, no wait\nM140 S60; Set Heat Bed temperature\nM190 S60; Wait for Heat Bed temperature\nM117 Waiting for probe to warm; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0; Move to start position\nM117 Getting the extruder up to temp\nM140 S{material_bed_temperature_layer_0}; Set Heat Bed temperature\nM104 S{material_print_temperature_layer_0}; Set Extruder temperature\nM109 S{material_print_temperature_layer_0}; Wait for Extruder temperature\nM190 S{material_bed_temperature_layer_0}; Wait for Heat Bed temperature\nG92 E0; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
-"machine_end_gcode": "; BIQU BX Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{machine_depth};TaDaaaa\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
+"machine_start_gcode": "; BIQU BX Start G-code\n;M117 Initial homing sequence; Home so that the probe is positioned to heat\nG28\nM117 Probe heating position\nG0 X65 Y5 Z1; Move the probe to the heating position.\nM117 Getting the heaters up to temp!\nM104 S140; Set Extruder temperature, no wait\nM140 S60; Set Heat Bed temperature\nM190 S60; Wait for Heat Bed temperature\nM117 Waiting for probe to warm; Wait another 90s for the probe to absorb heat.\nG4 S90\nM117 Post warming re-home\nG28; Home all axes again after warming\nM117 Z-Dance of my people\nG34\nM117 ABL Probing\nG29\nM900 K0 L0 T0;Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\nG1 Z2.0 F3000; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0; Move to start position\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature]; Set Heat Bed temperature\nM104 S[first_layer_temperature]; Set Extruder temperature\nM109 S[first_layer_temperature]; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature]; Wait for Heat Bed temperature\nG92 E0; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30; Draw the second line\nG92 E0; Reset Extruder\nM117 Lets make\nG1 X8 Y20 Z0.3 F5000.0; Move over to prevent blob squish",
+"machine_end_gcode": "; BIQU BX Default End Gcode\nG91;Relative positioning\nG1 E-2 F2700;Retract a bit\nG1 E-2 Z0.2 F2400;Retract a bit more and raise Z\nG1 X5 Y5 F3000;Wipe out\nG1 Z10;Raise Z by 10mm\nG90;Return to absolute positioning\nG1 X0 Y{print_bed_max[1]};TaDaaaa\nM106 S0;Turn-off fan\nM104 S0;Turn-off hotend\nM140 S0;Turn-off bed\nM84 X Y E;Disable all steppers but Z"
 }
--- a/resources/profiles/BIQU/process/fdm_process_biqu_common.json
+++ b/resources/profiles/BIQU/process/fdm_process_biqu_common.json
@@ -43,7 +43,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/BIQU/process/fdm_process_hurakan_common.json
+++ b/resources/profiles/BIQU/process/fdm_process_hurakan_common.json
@@ -43,7 +43,7 @@
    "ironing_type": "no ironing",
    "layer_height": "0.2",
    "reduce_infill_retraction": "1",
-    "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
+    "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
    "detect_overhang_wall": "1",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
--- a/resources/profiles/Comgrow.json
+++ b/resources/profiles/Comgrow.json
@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "01.07.00.00",
+	"version": "01.08.00.00",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [
--- a/resources/profiles/Comgrow/comgrow_t500_buildplate_texture.png
+++ b/resources/profiles/Comgrow/comgrow_t500_buildplate_texture.png
--- a/resources/profiles/Comgrow/filament/Comgrow
+++ b/resources/profiles/Comgrow/filament/Comgrow
@@ -11,12 +11,13 @@
 	"fan_cooling_layer_time": ["30"],
 	"overhang_fan_speed": ["90"],
 	"overhang_fan_threshold": ["25%"],
-	"fan_max_speed": ["90"],
-	"fan_min_speed": ["40"],
+	"fan_max_speed": ["25"],
+	"fan_min_speed": ["10"],
 	"slow_down_min_speed": ["10"],
 	"slow_down_layer_time": ["8"],
-	"filament_flow_ratio": ["0.95"],
-	"filament_max_volumetric_speed": ["30"],
+	"filament_flow_ratio": ["0.98"],
+	"filament_max_volumetric_speed": ["8"],
+	"nozzle_temperature_initial_layer": ["260"],
 	"filament_retraction_length": ["0.5"],
 	"filament_start_gcode": ["; filament start gcode\n"],
 	"compatible_printers": [
--- a/resources/profiles/Comgrow/machine/fdm_comgrow_common.json
+++ b/resources/profiles/Comgrow/machine/fdm_comgrow_common.json
@@ -18,16 +18,16 @@
    "5000"
  ],
  "machine_max_acceleration_travel": [
-    "20000",
-    "20000"
+    "3000",
+    "3000"
  ],
  "machine_max_acceleration_x": [
-    "8000",
-    "8000"
+    "3000",
+    "3000"
  ],
  "machine_max_acceleration_y": [
-    "8000",
-    "8000"
+    "3000",
+    "3000"
  ],
  "machine_max_acceleration_z": [
    "500",
@@ -38,12 +38,12 @@
    "25"
  ],
  "machine_max_speed_x": [
-    "500",
-    "200"
+    "300",
+    "300"
  ],
  "machine_max_speed_y": [
-    "500",
-    "200"
+    "300",
+    "300"
  ],
  "machine_max_speed_z": [
    "12",
@@ -79,7 +79,7 @@
  "min_layer_height": [
    "0.08"
  ],
-  "printable_height": "250",
+  "printable_height": "500",
  "extruder_clearance_radius": "65",
  "extruder_clearance_height_to_rod": "36",
  "extruder_clearance_height_to_lid": "140",
@@ -124,6 +124,12 @@
  "wipe": [
    "1"
  ],
+  "thumbnails": [
+    "32x32",
+    "300x300"
+  ],
+  "thumbnails_format": "PNG",
+  "nozzle_type": "hardened_steel",
  "default_filament_profile": [
    "Comgrow Generic PETG"
  ],
@@ -136,6 +142,5 @@
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
  "scan_first_layer": "0",
-  "nozzle_type": "undefine",
  "auxiliary_fan": "0"
 }
--- a/resources/profiles/Comgrow/process/0.16mm
+++ b/resources/profiles/Comgrow/process/0.16mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.16mm
+++ b/resources/profiles/Comgrow/process/0.16mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "8000",
-	"outer_wall_acceleration": "8000",
-	"top_surface_acceleration": "8000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "8000",
-	"inner_wall_acceleration": "8000",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.18mm
+++ b/resources/profiles/Comgrow/process/0.18mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "0",
-	"outer_wall_acceleration": "0",
-	"top_surface_acceleration": "0",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "0",
-	"travel_acceleration": "0",
-	"inner_wall_acceleration": "0",
 	"initial_layer_line_width": "0.42",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.20mm
+++ b/resources/profiles/Comgrow/process/0.20mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "8000",
-	"outer_wall_acceleration": "8000",
-	"top_surface_acceleration": "8000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "8000",
-	"inner_wall_acceleration": "8000",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.20mm
+++ b/resources/profiles/Comgrow/process/0.20mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.20mm
+++ b/resources/profiles/Comgrow/process/0.20mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "1.0",
 	"initial_layer_print_height": "0.28",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.20mm
+++ b/resources/profiles/Comgrow/process/0.20mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "0",
-	"outer_wall_acceleration": "0",
-	"top_surface_acceleration": "0",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "0",
-	"travel_acceleration": "0",
-	"inner_wall_acceleration": "0",
 	"initial_layer_line_width": "0.42",
 	"initial_layer_print_height": "0.24",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.24mm
+++ b/resources/profiles/Comgrow/process/0.24mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "8000",
-	"outer_wall_acceleration": "8000",
-	"top_surface_acceleration": "8000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "8000",
-	"inner_wall_acceleration": "8000",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.28",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.24mm
+++ b/resources/profiles/Comgrow/process/0.24mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.28",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.24mm
+++ b/resources/profiles/Comgrow/process/0.24mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.28",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.28mm
+++ b/resources/profiles/Comgrow/process/0.28mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "8000",
-	"outer_wall_acceleration": "8000",
-	"top_surface_acceleration": "8000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "8000",
-	"inner_wall_acceleration": "8000",
 	"initial_layer_line_width": "0.4",
 	"initial_layer_print_height": "0.32",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.28mm
+++ b/resources/profiles/Comgrow/process/0.28mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.6",
 	"initial_layer_print_height": "0.32",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.32mm
+++ b/resources/profiles/Comgrow/process/0.32mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.36",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.40mm
+++ b/resources/profiles/Comgrow/process/0.40mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.44",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.48mm
+++ b/resources/profiles/Comgrow/process/0.48mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.52",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/0.56mm
+++ b/resources/profiles/Comgrow/process/0.56mm
@@ -18,9 +18,6 @@
 	"brim_object_gap": "0",
 	"compatible_printers_condition": "",
 	"print_sequence": "by layer",
-	"default_acceleration": "3000",
-	"outer_wall_acceleration": "3000",
-	"top_surface_acceleration": "3000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
@@ -31,9 +28,6 @@
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
-	"initial_layer_acceleration": "1000",
-	"travel_acceleration": "3000",
-	"inner_wall_acceleration": "3000",
 	"initial_layer_line_width": "0.8",
 	"initial_layer_print_height": "0.60",
 	"infill_combination": "0",
--- a/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json
+++ b/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json
@@ -1,104 +1,229 @@
 {
-    "type": "process",
-    "name": "fdm_process_comgrow_common",
-    "from": "system",
-    "instantiation": "false",
-    "inherits": "fdm_process_common",
-    "adaptive_layer_height": "0",
-    "reduce_crossing_wall": "0",
-    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonic",
-    "bottom_shell_layers": "3",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel_factor": "50%",
+    "bottom_shell_layers": "2",
    "bottom_shell_thickness": "0",
-    "bridge_flow": "0.95",
-    "bridge_speed": "25",
-    "brim_width": "5",
-    "brim_object_gap": "0.1",
-    "compatible_printers_condition": "",
-    "print_sequence": "by layer",
-    "default_acceleration": "500",
-    "top_surface_acceleration": "500",
+    "bottom_solid_infill_flow_ratio": "1",
+    "bottom_surface_pattern": "monotonic",
+    "bridge_acceleration": "50%",
+    "bridge_angle": "0",
+    "bridge_density": "100%",
+    "bridge_flow": "0.85",
    "bridge_no_support": "0",
+    "bridge_speed": "25",
+    "brim_ears_detection_length": "1",
+    "brim_ears_max_angle": "125",
+    "brim_object_gap": "0",
+    "brim_type": "auto_brim",
+    "brim_width": "0",
+    "compatible_printers_condition": "",
+    "default_acceleration": "3000",
+    "default_jerk": "0",
+    "detect_overhang_wall": "1",
+    "detect_thin_wall": "1",
    "draft_shield": "disabled",
-    "elefant_foot_compensation": "0",
+    "elefant_foot_compensation": "0.1",
+    "elefant_foot_compensation_layers": "1",
    "enable_arc_fitting": "0",
-    "outer_wall_line_width": "0.4",
-    "wall_infill_order": "inner wall/outer wall/infill",
-    "line_width": "0.4",
-    "infill_direction": "45",
-    "sparse_infill_density": "15%",
-    "sparse_infill_pattern": "grid",
-    "initial_layer_acceleration": "500",
-    "travel_acceleration": "700",
-    "inner_wall_acceleration": "500",
-    "initial_layer_line_width": "0.5",
-    "initial_layer_print_height": "0.2",
+    "enable_overhang_speed": "1",
+    "enable_prime_tower": "0",
+    "enable_support": "0",
+    "enforce_support_layers": "0",
+    "exclude_object": "0",
+    "extra_perimeters_on_overhangs": "0",
+    "filename_format": "{printer_model}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
+    "filter_out_gap_fill": "0",
+    "flush_into_infill": "0",
+    "flush_into_objects": "0",
+    "flush_into_support": "1",
+    "from": "",
+    "fuzzy_skin": "none",
+    "fuzzy_skin_point_distance": "0.8",
+    "fuzzy_skin_thickness": "0.3",
+    "gap_infill_speed": "70",
+    "gcode_add_line_number": "0",
+    "gcode_comments": "0",
+    "gcode_label_objects": "0",
+    "hole_to_polyhole": "0",
+    "hole_to_polyhole_threshold": "0.01",
+    "hole_to_polyhole_twisted": "1",
+    "independent_support_layer_height": "1",
+    "infill_anchor": "400%",
+    "infill_anchor_max": "20",
    "infill_combination": "0",
-    "sparse_infill_line_width": "0.45",
+    "infill_direction": "45",
+    "infill_jerk": "9",
    "infill_wall_overlap": "23%",
+    "inherits": "fdm_process_common",
+    "initial_layer_acceleration": "1000",
+    "initial_layer_infill_speed": "60",
+    "initial_layer_jerk": "9",
+    "initial_layer_line_width": "0.4",
+    "initial_layer_min_bead_width": "85%",
+    "initial_layer_print_height": "0.24",
+    "initial_layer_speed": "40",
+    "initial_layer_travel_speed": "100%",
+    "inner_wall_acceleration": "3000",
+    "inner_wall_jerk": "9",
+    "inner_wall_line_width": "0.4",
+    "inner_wall_speed": "160",
    "interface_shells": "0",
+    "internal_bridge_speed": "150%",
+    "internal_solid_infill_acceleration": "100%",
+    "internal_solid_infill_line_width": "0",
+    "internal_solid_infill_pattern": "monotonic",
+    "internal_solid_infill_speed": "200",
+    "ironing_angle": "-1",
    "ironing_flow": "15%",
-    "ironing_spacing": "0.1",
+    "ironing_pattern": "zig-zag",
+    "ironing_spacing": "0.25",
    "ironing_speed": "15",
    "ironing_type": "no ironing",
    "layer_height": "0.2",
-    "reduce_infill_retraction": "1",
-    "filename_format": "{printer_model}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
-    "detect_overhang_wall": "1",
+    "line_width": "0.4",
+    "make_overhang_printable": "0",
+    "make_overhang_printable_angle": "55",
+    "make_overhang_printable_hole_size": "0",
+    "max_bridge_length": "10",
+    "max_travel_detour_distance": "0",
+    "max_volumetric_extrusion_rate_slope": "0",
+    "max_volumetric_extrusion_rate_slope_segment_length": "3",
+    "min_bead_width": "85%",
+    "min_feature_size": "25%",
+    "min_width_top_surface": "300%",
+    "minimum_sparse_infill_area": "10",
+    "only_one_wall_first_layer": "0",
+    "only_one_wall_top": "0",
+    "ooze_prevention": "0",
+    "outer_wall_acceleration": "1000",
+    "outer_wall_jerk": "9",
+    "outer_wall_speed": "140",
    "overhang_1_4_speed": "0",
    "overhang_2_4_speed": "20",
    "overhang_3_4_speed": "15",
    "overhang_4_4_speed": "10",
-    "inner_wall_line_width": "0.45",
-    "wall_loops": "3",
-    "print_settings_id": "",
-    "raft_layers": "0",
-    "seam_position": "aligned",
-    "skirt_distance": "2",
-    "skirt_height": "1",
-    "skirt_loops": "1",
-    "minimum_sparse_infill_area": "15",
-    "internal_solid_infill_line_width": "0.4",
-    "spiral_mode": "0",
-    "standby_temperature_delta": "-5",
-    "enable_support": "0",
-    "resolution": "0.012",
-    "support_type": "normal(auto)",
-    "support_style": "default",
-    "support_on_build_plate_only": "0",
-    "support_top_z_distance": "0.2",
-    "support_filament": "0",
-    "support_line_width": "0.4",
-    "support_interface_loop_pattern": "0",
-    "support_interface_filament": "0",
-    "support_interface_top_layers": "2",
-    "support_interface_bottom_layers": "2",
-    "support_interface_spacing": "0.5",
-    "support_interface_speed": "80",
-    "support_base_pattern": "rectilinear",
-    "support_base_pattern_spacing": "2.5",
-    "support_speed": "150",
-    "support_threshold_angle": "30",
-    "support_object_xy_distance": "0.35",
-    "tree_support_branch_angle": "45",
-    "tree_support_wall_count": "0",
-    "detect_thin_wall": "0",
-    "top_surface_pattern": "monotonic",
-    "top_surface_line_width": "0.4",
-    "top_shell_layers": "3",
-    "top_shell_thickness": "0.8",
-    "initial_layer_speed": "15",
-    "initial_layer_infill_speed": "20",
-    "outer_wall_speed": "25",
-    "inner_wall_speed": "40",
-    "internal_solid_infill_speed": "40",
-    "top_surface_speed": "30",
-    "gap_infill_speed": "30",
-    "sparse_infill_speed": "50",
-    "travel_speed": "150",
-    "enable_prime_tower": "0",
-    "wipe_tower_no_sparse_layers": "0",
+    "overhang_reverse": "0",
+    "overhang_reverse_threshold": "50%",
+    "overhang_speed_classic": "0",
+    "post_process": [],
+    "precise_outer_wall": "0",
+    "prime_tower_brim_width": "3",
    "prime_tower_width": "60",
-    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0"
+    "prime_volume": "45",
+    "print_flow_ratio": "1",
+    "print_sequence": "by layer",
+    "raft_contact_distance": "0.1",
+    "raft_expansion": "1.5",
+    "raft_first_layer_density": "90%",
+    "raft_first_layer_expansion": "2",
+    "raft_layers": "0",
+    "reduce_crossing_wall": "0",
+    "reduce_infill_retraction": "1",
+    "resolution": "0.012",
+    "role_based_wipe_speed": "1",
+    "seam_gap": "5%",
+    "seam_position": "aligned",
+    "single_extruder_multi_material_priming": "1",
+    "skirt_distance": "3",
+    "skirt_height": "2",
+    "skirt_loops": "0",
+    "skirt_speed": "50",
+    "slice_closing_radius": "0.049",
+    "slicing_mode": "regular",
+    "slow_down_layers": "0",
+    "slowdown_for_curled_perimeters": "0",
+    "small_perimeter_speed": "50%",
+    "small_perimeter_threshold": "0",
+    "solid_infill_filament": "1",
+    "sparse_infill_acceleration": "100%",
+    "sparse_infill_density": "10%",
+    "sparse_infill_filament": "1",
+    "sparse_infill_line_width": "0.4",
+    "sparse_infill_pattern": "adaptivecubic",
+    "sparse_infill_speed": "200",
+    "spiral_mode": "0",
+    "staggered_inner_seams": "0",
+    "standby_temperature_delta": "-5",
+    "support_angle": "0",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "0.2",
+    "support_bottom_interface_spacing": "0.5",
+    "support_bottom_z_distance": "0.2",
+    "support_critical_regions_only": "0",
+    "support_expansion": "0",
+    "support_filament": "0",
+    "support_interface_bottom_layers": "-1",
+    "support_interface_filament": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_pattern": "rectilinear",
+    "support_interface_spacing": "0.2",
+    "support_interface_speed": "80",
+    "support_interface_top_layers": "3",
+    "support_object_xy_distance": "0.35",
+    "support_on_build_plate_only": "0",
+    "support_remove_small_overhang": "1",
+    "support_speed": "140",
+    "support_style": "grid",
+    "support_threshold_angle": "40",
+    "support_top_z_distance": "0.15",
+    "support_type": "normal(auto)",
+    "thick_bridges": "0",
+    "timelapse_type": "0",
+    "top_shell_layers": "2",
+    "top_solid_infill_flow_ratio": "1",
+    "top_surface_acceleration": "2000",
+    "top_surface_jerk": "9",
+    "top_surface_line_width": "0.4",
+    "top_surface_pattern": "monotonic",
+    "top_surface_speed": "40",
+    "travel_acceleration": "3000",
+    "travel_jerk": "12",
+    "travel_speed": "200",
+    "travel_speed_z": "0",
+    "tree_support_adaptive_layer_height": "1",
+    "tree_support_angle_slow": "25",
+    "tree_support_auto_brim": "1",
+    "tree_support_branch_angle": "40",
+    "tree_support_branch_angle_organic": "40",
+    "tree_support_branch_diameter": "5",
+    "tree_support_branch_diameter_angle": "5",
+    "tree_support_branch_diameter_double_wall": "3",
+    "tree_support_branch_diameter_organic": "2",
+    "tree_support_branch_distance": "5",
+    "tree_support_branch_distance_organic": "1",
+    "tree_support_brim_width": "3",
+    "tree_support_tip_diameter": "0.8",
+    "tree_support_top_rate": "30%",
+    "tree_support_wall_count": "0",
+    "version": "1.7.0.0",
+    "wall_distribution_count": "1",
+    "wall_filament": "1",
+    "wall_generator": "arachne",
+    "wall_infill_order": "inner wall/outer wall/infill",
+    "wall_loops": "3",
+    "wall_transition_angle": "10",
+    "wall_transition_filter_deviation": "25%",
+    "wall_transition_length": "100%",
+    "wipe_on_loops": "0",
+    "wipe_speed": "80%",
+    "wipe_tower_bridging": "10",
+    "wipe_tower_cone_angle": "0",
+    "wipe_tower_extra_spacing": "100%",
+    "wipe_tower_extruder": "0",
+    "wipe_tower_no_sparse_layers": "0",
+    "wipe_tower_rotation_angle": "0",
+    "wiping_volumes_extruders": [
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70",
+        "70"
+    ],
+    "xy_contour_compensation": "0",
+    "xy_hole_compensation": "0"
 }
--- a/resources/profiles/Creality.json
+++ b/resources/profiles/Creality.json
@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "01.07.00.00",
+	"version": "01.08.00.00",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -8,5 +8,5 @@
    "bed_model": "creality_k1max_buildplate_model.stl",
    "bed_texture": "creality_k1max_buildplate_texture.png",
    "hotend_model": "",
-    "default_materials": "Creality Generic PLA @0.4 nozzle;Creality HF Generic PLA @0.4 nozzle;Creality HF Generic Speed PLA @0.4 nozzle;Creality Generic PETG @0.4 nozzle;Creality Generic TPU @0.4 nozzle;Creality Generic ABS @0.4 nozzle;Creality Generic PLA @0.6 nozzle;Creality HF Generic PLA @0.6 nozzle;Creality HF Generic Speed PLA @0.6 nozzle;Creality Generic PETG @0.6 nozzle;Creality Generic TPU @0.6 nozzle;Creality Generic ABS @0.6 nozzle;Creality Generic PLA @0.8 nozzle;Creality HF Generic PLA @0.8 nozzle;Creality HF Generic Speed PLA @0.8 nozzle;Creality Generic PETG @0.8 nozzle;Creality Generic TPU @0.8 nozzle;Creality Generic ABS @0.8 nozzle"
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -8,5 +8,5 @@
    "bed_model": "creality_k1_buildplate_model.stl",
    "bed_texture": "creality_k1_buildplate_texture.png",
    "hotend_model": "",
-    "default_materials": "Creality Generic PLA @0.4 nozzle;Creality HF Generic PLA @0.4 nozzle;Creality HF Generic Speed PLA @0.4 nozzle;Creality Generic PETG @0.4 nozzle;Creality Generic TPU @0.4 nozzle;Creality Generic ABS @0.4 nozzle;Creality Generic PLA @0.6 nozzle;Creality HF Generic PLA @0.6 nozzle;Creality HF Generic Speed PLA @0.6 nozzle;Creality Generic PETG @0.6 nozzle;Creality Generic TPU @0.6 nozzle;Creality Generic ABS @0.6 nozzle;Creality Generic PLA @0.8 nozzle;Creality HF Generic PLA @0.8 nozzle;Creality HF Generic Speed PLA @0.8 nozzle;Creality Generic PETG @0.8 nozzle;Creality Generic TPU @0.8 nozzle;Creality Generic ABS @0.8 nozzle"
+    "default_materials": "Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PETG;Creality Generic TPU;Creality Generic ABS"
 }
--- a/Show More
+++ b/Show More