printer_autosave.cfg modified - 14/01/26 - 13:49:17

printer_data/config/printer.cfg

@@ -76,10 +76,10 @@ sensor_pin: PC5
 min_temp: 0
 max_temp: 260
 # Deine PID Werte (aus dem Log übernommen):
-control: pid
-pid_kp = 31.519
-pid_ki = 2.020
-pid_kd = 122.925
+#control: pid
+#pid_kp = 31.519
+#pid_ki = 2.020
+#pid_kd = 122.925
 
 [heater_bed]
 heater_pin: PA7
@@ -88,10 +88,10 @@ sensor_pin: PC4
 min_temp: 0
 max_temp: 100
 # Deine PID Werte (aus dem Log übernommen):
-control: pid
-pid_kp = 69.066
-pid_ki = 1.319
-pid_kd = 903.898
+#control: pid
+#pid_kp = 69.066
+#pid_ki = 1.319
+#pid_kd = 903.898
 
 [heater_fan hotend_fan]
 pin: PC0
@@ -183,3 +183,15 @@ recover_velocity: 25
 #*# shaper_freq_x = 40.6
 #*# shaper_type_y = mzv
 #*# shaper_freq_y = 41.0
+#*#
+#*# [extruder]
+#*# control = pid
+#*# pid_kp = 31.914
+#*# pid_ki = 2.066
+#*# pid_kd = 123.269
+#*#
+#*# [heater_bed]
+#*# control = pid
+#*# pid_kp = 68.601
+#*# pid_ki = 1.270
+#*# pid_kd = 926.114