bridge issues #78

New Issue

MrUnknownDE · 2026-04-05T16:18:21+02:00

MrUnknownDE commented

2026-04-05 16:18:21 +02:00

Originally created by @jcrv92 on 3/29/2026

Is there an existing issue for this feature request?

I have searched the existing issues

https://github.com/user-attachments/assets/e79e518f-5aed-4e7c-abf1-520eac90cacc

just trying to print this project found that the bridge was falling apart without support, after i make some test to improve the bridge printing without support by increasing the flow lower the speed and all that, everything came out good on the tests, but when i start printing this project was sagging, i was asking myself why because i just run the test and everything came out good then looking the way that bridge and overhang wall was printed i realize the was printing first the overhang wall in the air and then the bridge, then i change to print first the infill first and is now printing first the bridge and then the overhang wall, but like show the video is still printing the bridge in the air when start. i don't know if there is a solution for this all ready, i don't find nothing if somebody know pls let me know. in new on the 3d print world.

Which printers will be beneficial to this feature?

All

Describe the solution you'd like

i think that if the bridge is printing with a spiral or circle pattern like the overhang wall, from the middle to the outside would improve that problem. I'm maybe wrong but after done the test to improve the bridge and how it works could be a solution. sorry if my writing is bad, I'm from Puerto Rico and i don't kwon to much English

Describe alternatives you've considered

No response

Additional context

No response

*Originally created by @jcrv92 on 3/29/2026* ### Is there an existing issue for this feature request? - [x] I have searched the existing issues ### Is your feature request related to a problem? https://github.com/user-attachments/assets/e79e518f-5aed-4e7c-abf1-520eac90cacc just trying to print this project found that the bridge was falling apart without support, after i make some test to improve the bridge printing without support by increasing the flow lower the speed and all that, everything came out good on the tests, but when i start printing this project was sagging, i was asking myself why because i just run the test and everything came out good then looking the way that bridge and overhang wall was printed i realize the was printing first the overhang wall in the air and then the bridge, then i change to print first the infill first and is now printing first the bridge and then the overhang wall, but like show the video is still printing the bridge in the air when start. i don't know if there is a solution for this all ready, i don't find nothing if somebody know pls let me know. in new on the 3d print world. ### Which printers will be beneficial to this feature? All ### Describe the solution you'd like i think that if the bridge is printing with a spiral or circle pattern like the overhang wall, from the middle to the outside would improve that problem. I'm maybe wrong but after done the test to improve the bridge and how it works could be a solution. sorry if my writing is bad, I'm from Puerto Rico and i don't kwon to much English ### Describe alternatives you've considered _No response_ ### Additional context _No response_

MrUnknownDE added the enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement labels 2026-04-05 16:18:22 +02:00

Sign in to join this conversation.

No Label enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement enhancement

1 Participants

Notifications

Due Date

No due date set.

Dependencies

No dependencies set.

Reference: github/OrcaSlicer#78