"Use firmware retraction" fails to disable Wipe, causing severe under-extrusion. #1155

New Issue

MrUnknownDE · 2026-04-05T16:54:20+02:00

MrUnknownDE commented

2026-04-05 16:54:20 +02:00

Originally created by @CodeOptimist on 1/7/2026

Is there an existing issue for this problem?

I have searched the existing issues

OrcaSlicer Version

2.3.1

Operating System (OS)

Windows

OS Version

Windows 11

Additional system information

No response

Printer

MyKlipper 0.6 nozzle

How to reproduce

With Wipe while retracting currently enabled, and Use firmware retraction currently disabled:

Open Printer settings
Check Use firmware retraction
Save/Close
Slice, Export & inspect G-code file
Re-open Printer settings
Switch to Extruder 1
NOW the warning prompt appears

Actual results

There is no initial warning prompt.
Slicing produces gcode with both firmware retract G10/G11 AND nozzle wipes.
Prints have extreme underextrusion artifacts around seams, surface edges, and elsewhere.

Expected results

The prompt to disable Wipe while retracting should appear either immediately after enabling Use firmware retraction, or after closing Printer settings, not when switching to the Extruder 1 tab (from Basic information).

Project file & Debug log uploads

firmware.retract.wipe.UI.bug.zip

Checklist of files to include

Log file
Project file

Anything else?

My first bug report went unseen and automatically closed as stale, presumably because I didn't give it a serious enough title, so here we are again. I'd link to the previous report, but I'm concerned that would cause this to (again) be automatically closed, and this needs eyes. Thanks.

(As just a UI issue, it should be an easy fix, but this UI issue has severe consequences atm - total print failure.)

*Originally created by @CodeOptimist on 1/7/2026* ### Is there an existing issue for this problem? - [x] I have searched the existing issues ### OrcaSlicer Version 2.3.1 ### Operating System (OS) Windows ### OS Version Windows 11 ### Additional system information _No response_ ### Printer MyKlipper 0.6 nozzle ### How to reproduce With `Wipe while retracting` currently enabled, and `Use firmware retraction` currently disabled: 1. Open `Printer settings` 2. Check `Use firmware retraction` 3. Save/Close 4. Slice, Export & inspect G-code file 5. Re-open `Printer settings` 6. Switch to `Extruder 1` 7. *NOW* the warning prompt appears ### Actual results 1. There is no initial warning prompt. 2. Slicing produces gcode with both firmware retract G10/G11 **AND** nozzle wipes. 3. Prints have extreme underextrusion artifacts around seams, surface edges, and elsewhere. ### Expected results The prompt to disable `Wipe while retracting` should appear either immediately after enabling `Use firmware retraction`, or after closing `Printer settings`, not when switching to the `Extruder 1` tab (from `Basic information`). ### Project file & Debug log uploads [firmware.retract.wipe.UI.bug.zip](https://github.com/user-attachments/files/24473949/firmware.retract.wipe.UI.bug.zip) ### Checklist of files to include - [ ] Log file - [x] Project file ### Anything else? My first bug report went unseen and automatically closed as stale, presumably because I didn't give it a serious enough title, so here we are again. I'd link to the previous report, but I'm concerned that would cause this to (again) be automatically closed, and this needs eyes. Thanks. (As just a UI issue, it should be an easy fix, but this UI issue has severe consequences atm - total print failure.)

Sign in to join this conversation.

No Label bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug bug

1 Participants

Notifications

Due Date

No due date set.

Dependencies

No dependencies set.

Reference: github/OrcaSlicer#1155