mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-04-06 00:32:05 +02:00
Wiki Update 11 - Strength (#10369)
* Create Patterns specific wiki * Fix typos in installation instructions Corrected the winget flag from --exact to -e and removed an extraneous backtick from the Mac xattr command in the README installation instructions. * Improve README formatting and clarity * Calibration Flow Ratio Yolo Archimedean cords Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com> * redirection/tab.cpp section * Missing Frequent * remove auto-cooling * remove thumbnails * seam pointers * walls * infill * Image standarization * Fix broken internal links * Add reference note to Arachne wall generator docs * OrcaSlicer std * PrusaSlicer std * 2d-lateral xlsx * vertical patterns * Redirections fix * Update speed_settings_overhang_speed.md * Fix to action * FlowRate Co-Authored-By: MxBrnr <142743732+MxBrnr@users.noreply.github.com> * Top Bottom Shells * advanced strength * Action fix * Update How-to-wiki.md * Home.md icons and reorganize sections * Home Icons fix * Update cornering-calib.md * Update strength_settings_infill.md * Update Auxiliary-fan.md Co-Authored-By: Fisheye_3D <78997080+fisheye3d@users.noreply.github.com> * Add warning about wiki maintenance status
This commit is contained in:
Ian Bassi
GitHub
66
README.md
66
README.md
@@ -37,10 +37,8 @@ If you come across any of these in search results, please report them as unsafe
|
||||
</tr>
|
||||
</table>
|
||||
|
||||
|
||||
</div>
|
||||
|
||||
|
||||
# Main features
|
||||
|
||||
- **[Advanced Calibration Tools](https://github.com/SoftFever/OrcaSlicer/wiki/Calibration)**
|
||||
@@ -48,7 +46,7 @@ If you come across any of these in search results, please report them as unsafe
|
||||
- **[Precise Wall](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_precision#precise-wall) and [Seam Control](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_seam)**
|
||||
Adjust outer wall spacing and apply scarf seams to enhance print accuracy.
|
||||
- **[Sandwich Mode](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_wall_and_surfaces#innerouterinner) and [Polyholes](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_precision#polyholes) Support**
|
||||
Use varied infill patterns and accurate hole shapes for improved clarity.
|
||||
Use varied infill [patterns](https://github.com/SoftFever/OrcaSlicer/wiki/strength_settings_patterns) and accurate hole shapes for improved clarity.
|
||||
- **[Overhang](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_overhangs) and [Support Optimization](https://github.com/SoftFever/OrcaSlicer/wiki#support-settings)**
|
||||
Modify geometry for printable overhangs with precise support placement.
|
||||
- **[Granular Controls](https://github.com/SoftFever/OrcaSlicer/wiki#process-settings) and Customization**
|
||||
@@ -77,16 +75,19 @@ Please note that the wiki is a work in progress. We appreciate your patience as
|
||||
# Download
|
||||
|
||||
## Stable Release
|
||||
|
||||
📥 **[Download the Latest Stable Release](https://github.com/SoftFever/OrcaSlicer/releases/latest)**
|
||||
Visit our GitHub Releases page for the latest stable version of Orca Slicer, recommended for most users.
|
||||
Visit our GitHub Releases page for the latest stable version of OrcaSlicer, recommended for most users.
|
||||
|
||||
## Nightly Builds
|
||||
🌙 **[Download the Latest Nightly Build](https://github.com/SoftFever/OrcaSlicer/releases/tag/nightly-builds)**
|
||||
Explore the latest developments in Orca Slicer with our nightly builds. Feedback on these versions is highly appreciated.
|
||||
|
||||
🌙 **[Download the Latest Nightly Build](https://github.com/SoftFever/OrcaSlicer/releases/tag/nightly-builds)**
|
||||
Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.
|
||||
|
||||
# How to install
|
||||
|
||||
## Windows
|
||||
|
||||
Download the **Windows Installer exe** for your preferred version from the [releases page](https://github.com/SoftFever/OrcaSlicer/releases).
|
||||
|
||||
- *For convenience there is also a portable build available.*
|
||||
@@ -102,15 +103,18 @@ Download the **Windows Installer exe** for your preferred version from the [rel
|
||||
- This file may already be available on your computer if you've installed visual studio. Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
|
||||
</details>
|
||||
|
||||
Windows Package Manager:
|
||||
Windows Package Manager
|
||||
|
||||
```shell
|
||||
winget install --id=SoftFever.OrcaSlicer --exact
|
||||
winget install --id=SoftFever.OrcaSlicer -e
|
||||
```
|
||||
|
||||
## Mac:
|
||||
## Mac
|
||||
|
||||
1. Download the DMG for your computer: `arm64` version for Apple Silicon and `x86_64` for Intel CPU.
|
||||
2. Drag OrcaSlicer.app to Application folder.
|
||||
3. *If you want to run a build from a PR, you also need to follow the instructions below:*
|
||||
|
||||
<details>
|
||||
<summary>Quarantine</summary>
|
||||
|
||||
@@ -120,27 +124,33 @@ winget install --id=SoftFever.OrcaSlicer --exact
|
||||
|
||||
- Option 2:
|
||||
Execute this command in terminal:
|
||||
|
||||
```shell
|
||||
xattr -dr com.apple.quarantine /Applications/OrcaSlicer.app`
|
||||
xattr -dr com.apple.quarantine /Applications/OrcaSlicer.app
|
||||
```
|
||||
|
||||
- Option 3:
|
||||
- Step 1: open the app, a warning window will pop up
|
||||
|
||||
- Step 2: in `System Settings` -> `Privacy & Security`, click `Open Anyway`:
|
||||
- Step 2: in `System Settings` -> `Privacy & Security`, click `Open Anyway`:
|
||||
|
||||
</details>
|
||||
|
||||
## Linux (Ubuntu):
|
||||
## Linux (Ubuntu)
|
||||
|
||||
1. If you run into trouble executing it, try this command in the terminal:
|
||||
`chmod +x /path_to_appimage/OrcaSlicer_Linux.AppImage`
|
||||
|
||||
# How to Compile
|
||||
|
||||
All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://github.com/SoftFever/OrcaSlicer/wiki/How-to-build) page.
|
||||
|
||||
Please refer to the wiki to ensure you're following the latest and most accurate steps for your platform.
|
||||
|
||||
# Klipper Note:
|
||||
# Klipper Note
|
||||
|
||||
If you're running Klipper, it's recommended to add the following configuration to your `printer.cfg` file.
|
||||
|
||||
```gcode
|
||||
# Enable object exclusion
|
||||
[exclude_object]
|
||||
@@ -151,11 +161,13 @@ resolution: 0.1
|
||||
```
|
||||
|
||||
# Supports
|
||||
**Orca Slicer** is an open-source project and I'm deeply grateful to all my sponsors and backers.
|
||||
|
||||
**OrcaSlicer** is an open-source project and I'm deeply grateful to all my sponsors and backers.
|
||||
Their generous support enables me to purchase filaments and other essential 3D printing materials for the project.
|
||||
Thank you! :)
|
||||
|
||||
## Sponsors:
|
||||
|
||||
<table>
|
||||
<tr>
|
||||
<td>
|
||||
@@ -172,31 +184,29 @@ Thank you! :)
|
||||
</table>
|
||||
|
||||
## Backers:
|
||||
|
||||
**Ko-fi supporters** ☕: [Backers list](https://github.com/user-attachments/files/16147016/Supporters_638561417699952499.csv)
|
||||
|
||||
## Support me
|
||||
|
||||
<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>
|
||||
<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>
|
||||
<a href="https://paypal.me/softfever3d"><img src="https://img.shields.io/badge/PayPal-003087?style=flat&logo=paypal&logoColor=fff" height="50"></a>
|
||||
|
||||
## Some background
|
||||
|
||||
OrcaSlicer was originally forked from Bambu Studio, it was previously known as BambuStudio-SoftFever.
|
||||
|
||||
[Bambu Studio](https://github.com/bambulab/BambuStudio) is forked from [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer) by Prusa Research, which is from [Slic3r](https://github.com/Slic3r/Slic3r) by Alessandro Ranellucci and the RepRap community.
|
||||
Orca Slicer incorporates a lot of features from [SuperSlicer](https://github.com/supermerill/SuperSlicer) by @supermerill
|
||||
Orca Slicer's logo is designed by community member Justin Levine(@freejstnalxndr).
|
||||
OrcaSlicer incorporates a lot of features from [SuperSlicer](https://github.com/supermerill/SuperSlicer) by @supermerill
|
||||
OrcaSlicer's logo is designed by community member Justin Levine (@freejstnalxndr).
|
||||
|
||||
# License
|
||||
**Orca Slicer** is licensed under the GNU Affero General Public License, version 3. Orca Slicer is based on Bambu Studio by BambuLab.
|
||||
|
||||
**Bambu Studio** is licensed under the GNU Affero General Public License, version 3. Bambu Studio is based on PrusaSlicer by PrusaResearch.
|
||||
|
||||
**PrusaSlicer** is licensed under the GNU Affero General Public License, version 3. PrusaSlicer is owned by Prusa Research. PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci.
|
||||
|
||||
**Slic3r** is licensed under the GNU Affero General Public License, version 3. Slic3r was created by Alessandro Ranellucci with the help of many other contributors.
|
||||
|
||||
The GNU Affero General Public License, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
|
||||
|
||||
Orca Slicer includes a pressure advance calibration pattern test adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.
|
||||
|
||||
The Bambu networking plugin is based on non-free libraries from BambuLab. It is optional to the Orca Slicer and provides extended functionalities for Bambulab printer users.
|
||||
- **OrcaSlicer** is licensed under the GNU Affero General Public License, version 3. OrcaSlicer is based on Bambu Studio by BambuLab.
|
||||
- **Bambu Studio** is licensed under the GNU Affero General Public License, version 3. Bambu Studio is based on PrusaSlicer by PrusaResearch.
|
||||
- **PrusaSlicer** is licensed under the GNU Affero General Public License, version 3. PrusaSlicer is owned by Prusa Research. PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci.
|
||||
- **Slic3r** is licensed under the GNU Affero General Public License, version 3. Slic3r was created by Alessandro Ranellucci with the help of many other contributors.
|
||||
- The **GNU Affero General Public License**, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
|
||||
- OrcaSlicer includes a **pressure advance calibration pattern test** adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.
|
||||
- The **Bambu networking plugin** is based on non-free libraries from BambuLab. It is optional to the OrcaSlicer and provides extended functionalities for Bambulab printer users.
|
||||
|
||||
Reference in New Issue
Block a user