Fix json parsing in openiris_device in cases where logs got stiched together, fix tests not waiting long enough after reboot, add board cleanup step after test session, fix leftover prints in networks representation breaking json output

tests/test_commands.py

@@ -24,18 +24,16 @@ def test_ping_wired(get_openiris_device):
 
 @pytest.mark.has_capability("wired")
 @pytest.mark.has_capability("wireless")
-def test_changing_mode_to_wired(get_openiris_device, ensure_board_in_mode):
+def test_changing_mode_to_wired(get_openiris_device, ensure_board_in_mode, config):
     device = get_openiris_device()
 
     # let's make sure we're in the wireless mode first, if we're going to try changing it
     device = ensure_board_in_mode("wifi", device)
-    command_result = device.send_command("switch_mode", {"mode": "uvc"})
-    assert not has_command_failed(command_result)
-
-    # to avoid any issues, let's restart the board
     with DetectPortChange() as port_selector:
+        command_result = device.send_command("switch_mode", {"mode": "uvc"})
+        assert not has_command_failed(command_result)
         device.send_command("restart_device")
-        time.sleep(3)
+        time.sleep(config.SWITCH_MODE_REBOOT_TIME)
 
     # and since we've changed the ports
     device = get_openiris_device(port_selector.get_new_port())
@@ -45,7 +43,7 @@ def test_changing_mode_to_wired(get_openiris_device, ensure_board_in_mode):
     assert not has_command_failed(result)
 
 
-def test_changing_mode_same_mode(get_openiris_device, ensure_board_in_mode):
+def test_changing_mode_same_mode(get_openiris_device):
     device = get_openiris_device()
     result = device.send_command("get_device_mode")
     current_mode = result["results"][0]["result"]["data"]["mode"].lower()
@@ -63,7 +61,7 @@ def test_changing_mode_invalid_mode(get_openiris_device):
     assert has_command_failed(command_result)
 
 
-def test_setting_mdns_name(get_openiris_device, ensure_board_in_mode):
+def test_setting_mdns_name(get_openiris_device, ensure_board_in_mode, config):
     def check_mdns_name(name: str):
         command_result = device.send_command("get_mdns_name")
         assert not has_command_failed(command_result)
@@ -84,7 +82,7 @@ def test_setting_mdns_name(get_openiris_device, ensure_board_in_mode):
 
     device.send_command("restart_device")
     # let the board boot, wait till it connects
-    time.sleep(3)
+    time.sleep(config.SWITCH_MODE_REBOOT_TIME)
     check_mdns_name(second_name)
 
 
@@ -97,7 +95,7 @@ def test_setting_mdns_name_invalid_payload(get_openiris_device, payload):
 
 @pytest.mark.has_capability("wired")
 @pytest.mark.has_capability("wireless")
-def test_reboot_command(get_openiris_device, ensure_board_in_mode):
+def test_reboot_command(get_openiris_device, ensure_board_in_mode, config):
     device = ensure_board_in_mode("wifi", get_openiris_device())
 
     command_result = device.send_command("switch_mode", {"mode": "uvc"})
@@ -108,9 +106,9 @@ def test_reboot_command(get_openiris_device, ensure_board_in_mode):
     # which might be a little overkill kill and won't work on boards not supporting both modes
     with DetectPortChange() as port_selector:
         device.send_command("restart_device")
-        time.sleep(3)
+        time.sleep(config.SWITCH_MODE_REBOOT_TIME)
 
-    assert len(port_selector.get_new_port())
+    assert port_selector.get_new_port()
 
 
 def test_get_serial(get_openiris_device):
@@ -203,8 +201,20 @@ def test_check_wifi_status(get_openiris_device, ensure_board_in_mode):
 
 
 @pytest.mark.has_capability("wireless")
-def test_scan_networks(get_openiris_device, ensure_board_in_mode):
-    device = ensure_board_in_mode("wifi", get_openiris_device())
+def test_scan_networks(get_openiris_device, ensure_board_in_mode, config):
+    # this test might run after some tests that affect the network on the device
+    # which might prevent us from scanning and thus make the test fail, so we reset the config
+    device = get_openiris_device()
+    reset_command = device.send_command("reset_config", {"section": "all"})
+    assert not has_command_failed(reset_command)
+
+    with DetectPortChange() as port_selector:
+        device.send_command("restart_device")
+        time.sleep(config.SWITCH_MODE_REBOOT_TIME)
+
+    device = ensure_board_in_mode(
+        "wifi", get_openiris_device(port_selector.get_new_port())
+    )
     command_result = device.send_command("scan_networks")
     assert not has_command_failed(command_result)
     assert len(command_result["results"][0]["result"]["data"]["networks"]) != 0
@@ -223,7 +233,7 @@ def test_reset_config_invalid_payload(get_openiris_device):
     assert has_command_failed(reset_command)
 
 
-def test_reset_config(get_openiris_device):
+def test_reset_config(get_openiris_device, config):
     device = get_openiris_device()
     command_result = device.send_command("set_mdns", {"hostname": "somedifferentname"})
     assert not has_command_failed(command_result)
@@ -237,7 +247,7 @@ def test_reset_config(get_openiris_device):
     # since the config was reset, but the data will still be held in memory, we need to reboot the device
     with DetectPortChange():
         device.send_command("restart_device")
-        time.sleep(3)
+        time.sleep(config.SWITCH_MODE_REBOOT_TIME)
 
     new_config = device.send_command("get_config")
     assert not has_command_failed(new_config)
@@ -254,14 +264,14 @@ def test_set_wifi(get_openiris_device, ensure_board_in_mode, config):
 
     with DetectPortChange():
         device.send_command("restart_device")
-        time.sleep(3)
+        time.sleep(config.SWITCH_MODE_REBOOT_TIME)
 
     # now that the config is clear, let's try setting the wifi
     device = ensure_board_in_mode("wifi", device)
     params = {
         "name": "main",
-        "ssid": config["WIFI_SSID"],
-        "password": config["WIFI_PASS"],
+        "ssid": config.WIFI_SSID,
+        "password": config.WIFI_PASS,
         "channel": 0,
         "power": 0,
     }
@@ -270,10 +280,8 @@ def test_set_wifi(get_openiris_device, ensure_board_in_mode, config):
 
     # now, let's force connection and check if it worked
     connect_wifi_result = device.send_command("connect_wifi")
-    assert not has_command_failed(connect_wifi_result)
-    time.sleep(
-        int(config["WIFI_CONNECTION_TIMEOUT"])
-    )  # and let it try to for some time
+    assert not -has_command_failed(connect_wifi_result)
+    time.sleep(config.WIFI_CONNECTION_TIMEOUT)  # and let it try to for some time
 
     wifi_status_command = device.send_command("get_wifi_status")
     assert not has_command_failed(wifi_status_command)
@@ -297,7 +305,7 @@ def test_set_wifi_invalid_network(get_openiris_device, ensure_board_in_mode, con
     device.send_command("connect_wifi")
 
     time.sleep(
-        int(config["INVALID_WIFI_CONNECTION_TIMEOUT"])
+        config.INVALID_WIFI_CONNECTION_TIMEOUT
     )  # and let it try to for some time
 
     wifi_status_command = device.send_command("get_wifi_status")
@@ -351,8 +359,8 @@ def test_update_main_wifi_network(ensure_board_in_mode, get_openiris_device, con
 
     params2 = {
         **params1,
-        "ssid": config["WIFI_SSID"],
-        "password": config["WIFI_PASS"],
+        "ssid": config.WIFI_SSID,
+        "password": config.WIFI_PASS,
     }
 
     set_wifi_result = device.send_command("set_wifi", params1)