Fixed PR comments

README.md

@@ -1,5 +1,5 @@
-| Supported Targets (IDK lol) | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C6 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | -------- |
 
 ## OpenIris-ESPIDF
 
@@ -40,7 +40,7 @@ code .
 
 5) Configure ESP‑IDF in the extension
 - On first launch, the extension may prompt to install ESP‑IDF and tools — follow the steps. It can take a while.
-- If you see the extension’s home page instead, click “Configure extension”, pick “EXPRESS”, choose “GitHub” as the server and version “v5.3.3”.
+- If you see the extension’s home page instead, click “Configure extension”, pick “EXPRESS”, choose “GitHub” as the server and version “v5.4.2”.
 - Then open the ESP‑IDF Explorer tab and click “Open ESP‑IDF Terminal”. We’ll use that for builds.
 
 After this, you’re ready for the Quick start below.
@@ -66,16 +66,21 @@ python3 ./tools/switchBoardType.py --board xiao-esp32s3 --diff
 - Build, flash, and open the serial monitor.
 
 ### 3) Use the Python setup CLI (recommended)
-Configure the device conveniently over USB serial.
+Configure the device over USB serial.
 
-Windows (cmd):
+Before you run it:
+- If you still have the serial monitor open, close it (the port must be free).
+- In VS Code, open the sidebar “ESP‑IDF: Explorer” and click “Open ESP‑IDF Terminal”. We’ll run the CLI there so Python and packages are in the right environment.
+
+Then run:
 ```cmd
 python .\tools\openiris_setup.py --port COMxx
 ```
-macOS/Linux (bash):
+Examples:
-```bash
+- Windows: `python .\tools\openiris_setup.py --port COM69`, …
-python3 ./tools/openiris_setup.py --port /dev/ttyUSB0
+- macOS: idk
-```
+- Linux: idk
+
 What the CLI can do:
 - Wi‑Fi menu: automatic (scan → pick → password → connect → wait for IP) or manual (scan, show, configure, connect, status)
 - Set MDNS/Device name (also used for the UVC device name)

components/LEDManager/LEDManager/LEDManager.cpp

@@ -152,6 +152,15 @@ void LEDManager::displayCurrentPattern()
 
 void LEDManager::updateState(const LEDStates_e newState)
 {
+    // If we've got an error state - that's it, keep repeating it indefinitely
+    if (ledStateMap[this->currentState].isError)
+        return;
+
+    // Alternative (recoverable error states):
+    // Allow recovery from error states by only blocking transitions when both, current and new states are error. Uncomment to enable recovery.
+    // if (ledStateMap[this->currentState].isError && ledStateMap[newState].isError)
+    //     return;
+
     // Only update when new state differs and is known.
     if (!ledStateMap.contains(newState))
         return;
@@ -159,11 +168,6 @@ void LEDManager::updateState(const LEDStates_e newState)
     if (newState == this->currentState)
         return;
 
-    // Allow recovery from error states: if both current and new are error, ignore.
-    // Otherwise permit transitioning out of error when a non-error state arrives.
-    if (ledStateMap[this->currentState].isError && ledStateMap[newState].isError)
-        return;
-
     this->currentState = newState;
     this->currentPatternIndex = 0;
     this->finishedPattern = false;
@@ -181,12 +185,6 @@ void LEDManager::setExternalLEDDutyCycle(uint8_t dutyPercent)
     const uint32_t dutyCycle = (static_cast<uint32_t>(dutyPercent) * 255) / 100;
     ESP_LOGI(LED_MANAGER_TAG, "Updating external LED duty to %u%% (raw %lu)", dutyPercent, dutyCycle);
 
-    // Persist into config immediately so it survives reboot
-    if (this->deviceConfig)
-    {
-        this->deviceConfig->setLEDDUtyCycleConfig(dutyPercent);
-    }
-
     // Apply to LEDC hardware live
     // We configured channel 0 in setup with LEDC_LOW_SPEED_MODE
     ESP_ERROR_CHECK_WITHOUT_ABORT(ledc_set_duty(LEDC_LOW_SPEED_MODE, LEDC_CHANNEL_0, dutyCycle));

dependencies.lock

@@ -53,7 +53,7 @@ dependencies:
   idf:
     source:
       type: idf
-    version: 5.3.3
+    version: 5.4.2
 direct_dependencies:
 - espressif/cmake_utilities
 - espressif/esp32-camera

sdkconfig

@@ -1,6 +1,6 @@
 #
 # Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) 5.3.3 Project Configuration
+# Espressif IoT Development Framework (ESP-IDF) 5.4.2 Project Configuration
 #
 CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
 CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
@@ -138,6 +138,7 @@ CONFIG_SOC_I2C_SUPPORT_RTC=y
 CONFIG_SOC_I2C_SUPPORT_10BIT_ADDR=y
 CONFIG_SOC_I2C_SLAVE_SUPPORT_BROADCAST=y
 CONFIG_SOC_I2C_SLAVE_SUPPORT_I2CRAM_ACCESS=y
+CONFIG_SOC_I2C_SLAVE_CAN_GET_STRETCH_CAUSE=y
 CONFIG_SOC_I2S_NUM=2
 CONFIG_SOC_I2S_HW_VERSION_2=y
 CONFIG_SOC_I2S_SUPPORTS_XTAL=y
@@ -151,6 +152,7 @@ CONFIG_SOC_I2S_PDM_MAX_RX_LINES=4
 CONFIG_SOC_I2S_SUPPORTS_TDM=y
 CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y
 CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK=y
+CONFIG_SOC_LEDC_TIMER_NUM=4
 CONFIG_SOC_LEDC_CHANNEL_NUM=8
 CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=14
 CONFIG_SOC_LEDC_SUPPORT_FADE_STOP=y
@@ -307,6 +309,7 @@ CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y
 CONFIG_SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY=y
 CONFIG_SOC_PM_CPU_RETENTION_BY_RTCCNTL=y
 CONFIG_SOC_PM_MODEM_RETENTION_BY_BACKUPDMA=y
+CONFIG_SOC_PM_MODEM_PD_BY_SW=y
 CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y
 CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y
 CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y
@@ -368,10 +371,11 @@ CONFIG_SOC_ULP_HAS_ADC=y
 CONFIG_SOC_PHY_COMBO_MODULE=y
 CONFIG_IDF_CMAKE=y
 CONFIG_IDF_TOOLCHAIN="gcc"
+CONFIG_IDF_TOOLCHAIN_GCC=y
 CONFIG_IDF_TARGET_ARCH_XTENSA=y
 CONFIG_IDF_TARGET_ARCH="xtensa"
 CONFIG_IDF_TARGET="esp32s3"
-CONFIG_IDF_INIT_VERSION="5.3.3"
+CONFIG_IDF_INIT_VERSION="5.4.2"
 CONFIG_IDF_TARGET_ESP32S3=y
 CONFIG_IDF_FIRMWARE_CHIP_ID=0x0009
 
@@ -403,6 +407,10 @@ CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set
 # CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set
+
+#
+# Log
+#
 # CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set
 # CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set
@@ -411,6 +419,14 @@ CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
 # CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set
 CONFIG_BOOTLOADER_LOG_LEVEL=3
 
+#
+# Format
+#
+# CONFIG_BOOTLOADER_LOG_COLORS is not set
+CONFIG_BOOTLOADER_LOG_TIMESTAMP_SOURCE_CPU_TICKS=y
+# end of Format
+# end of Log
+
 #
 # Serial Flash Configurations
 #
@@ -481,6 +497,7 @@ CONFIG_ESP_ROM_HAS_CACHE_WRITEBACK_BUG=y
 CONFIG_ESP_ROM_HAS_SW_FLOAT=y
 CONFIG_ESP_ROM_HAS_VERSION=y
 CONFIG_ESP_ROM_SUPPORT_DEEP_SLEEP_WAKEUP_STUB=y
+CONFIG_ESP_ROM_HAS_OUTPUT_PUTC_FUNC=y
 
 #
 # Boot ROM Behavior
@@ -497,9 +514,9 @@ CONFIG_BOOT_ROM_LOG_ALWAYS_ON=y
 # CONFIG_ESPTOOLPY_NO_STUB is not set
 # CONFIG_ESPTOOLPY_OCT_FLASH is not set
 CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT=y
-CONFIG_ESPTOOLPY_FLASHMODE_QIO=y
+# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
-# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set
+CONFIG_ESPTOOLPY_FLASHMODE_DIO=y
 # CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set
 CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y
 CONFIG_ESPTOOLPY_FLASHMODE="dio"
@@ -507,17 +524,16 @@ CONFIG_ESPTOOLPY_FLASHMODE="dio"
 CONFIG_ESPTOOLPY_FLASHFREQ_80M=y
 # CONFIG_ESPTOOLPY_FLASHFREQ_40M is not set
 # CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set
-CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT=y
 CONFIG_ESPTOOLPY_FLASHFREQ="80m"
 # CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y
+# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set
-# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set
+CONFIG_ESPTOOLPY_FLASHSIZE_8MB=y
 # CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set
 # CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set
-CONFIG_ESPTOOLPY_FLASHSIZE="4MB"
+CONFIG_ESPTOOLPY_FLASHSIZE="8MB"
 # CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set
 CONFIG_ESPTOOLPY_BEFORE_RESET=y
 # CONFIG_ESPTOOLPY_BEFORE_NORESET is not set
@@ -534,6 +550,7 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
 # CONFIG_PARTITION_TABLE_SINGLE_APP is not set
 # CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set
 # CONFIG_PARTITION_TABLE_TWO_OTA is not set
+# CONFIG_PARTITION_TABLE_TWO_OTA_LARGE is not set
 CONFIG_PARTITION_TABLE_CUSTOM=y
 CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="min_spiffs.csv"
 CONFIG_PARTITION_TABLE_FILENAME="min_spiffs.csv"
@@ -578,32 +595,32 @@ CONFIG_WIFI_AP_PASSWORD="12345678"
 # OpenIris: LED Configuration
 #
 CONFIG_LED_BLINK_GPIO=8
-CONFIG_LED_EXTERNAL_GPIO=1
+CONFIG_LED_EXTERNAL_GPIO=9
 CONFIG_LED_EXTERNAL_CONTROL=y
-CONFIG_LED_EXTERNAL_PWM_FREQ=5000
+CONFIG_LED_EXTERNAL_PWM_FREQ=20000
-CONFIG_LED_EXTERNAL_PWM_DUTY_CYCLE=100
+CONFIG_LED_EXTERNAL_PWM_DUTY_CYCLE=50
 # end of OpenIris: LED Configuration
 
 #
 # Camera sensor pinout configuration
 #
-CONFIG_CAMERA_MODULE_NAME="SWROOM_BABBLE_S3"
+CONFIG_CAMERA_MODULE_NAME="FaceFocusVR_Face"
 CONFIG_PWDN_GPIO_NUM=-1
 CONFIG_RESET_GPIO_NUM=-1
-CONFIG_XCLK_GPIO_NUM=4
+CONFIG_XCLK_GPIO_NUM=10
-CONFIG_SIOD_GPIO_NUM=48
+CONFIG_SIOD_GPIO_NUM=40
-CONFIG_SIOC_GPIO_NUM=47
+CONFIG_SIOC_GPIO_NUM=39
-CONFIG_Y9_GPIO_NUM=13
+CONFIG_Y9_GPIO_NUM=48
-CONFIG_Y8_GPIO_NUM=5
+CONFIG_Y8_GPIO_NUM=11
-CONFIG_Y7_GPIO_NUM=6
+CONFIG_Y7_GPIO_NUM=12
-CONFIG_Y6_GPIO_NUM=15
+CONFIG_Y6_GPIO_NUM=14
-CONFIG_Y5_GPIO_NUM=17
+CONFIG_Y5_GPIO_NUM=16
-CONFIG_Y4_GPIO_NUM=8
+CONFIG_Y4_GPIO_NUM=18
-CONFIG_Y3_GPIO_NUM=18
+CONFIG_Y3_GPIO_NUM=17
-CONFIG_Y2_GPIO_NUM=16
+CONFIG_Y2_GPIO_NUM=15
-CONFIG_VSYNC_GPIO_NUM=21
+CONFIG_VSYNC_GPIO_NUM=38
-CONFIG_HREF_GPIO_NUM=14
+CONFIG_HREF_GPIO_NUM=47
-CONFIG_PCLK_GPIO_NUM=7
+CONFIG_PCLK_GPIO_NUM=13
 # end of Camera sensor pinout configuration
 
 #
@@ -616,6 +633,7 @@ CONFIG_COMPILER_OPTIMIZATION_PERF=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
 # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set
 # CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set
+CONFIG_COMPILER_ASSERT_NDEBUG_EVALUATE=y
 CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y
 CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
 # CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set
@@ -626,14 +644,18 @@ CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y
 # CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set
 # CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set
 # CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set
+# CONFIG_COMPILER_NO_MERGE_CONSTANTS is not set
 # CONFIG_COMPILER_WARN_WRITE_STRINGS is not set
+CONFIG_COMPILER_DISABLE_DEFAULT_ERRORS=y
 # CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set
 # CONFIG_COMPILER_DISABLE_GCC13_WARNINGS is not set
+# CONFIG_COMPILER_DISABLE_GCC14_WARNINGS is not set
 # CONFIG_COMPILER_DUMP_RTL_FILES is not set
 CONFIG_COMPILER_RT_LIB_GCCLIB=y
 CONFIG_COMPILER_RT_LIB_NAME="gcc"
 # CONFIG_COMPILER_ORPHAN_SECTIONS_WARNING is not set
 CONFIG_COMPILER_ORPHAN_SECTIONS_PLACE=y
+# CONFIG_COMPILER_STATIC_ANALYZER is not set
 # end of Compiler options
 
 #
@@ -723,6 +745,12 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # CONFIG_I2S_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy I2S Driver Configurations
 
+#
+# Legacy I2C Driver Configurations
+#
+# CONFIG_I2C_SKIP_LEGACY_CONFLICT_CHECK is not set
+# end of Legacy I2C Driver Configurations
+
 #
 # Legacy PCNT Driver Configurations
 #
@@ -810,6 +838,7 @@ CONFIG_GPTIMER_OBJ_CACHE_SAFE=y
 #
 # CONFIG_I2C_ISR_IRAM_SAFE is not set
 # CONFIG_I2C_ENABLE_DEBUG_LOG is not set
+# CONFIG_I2C_ENABLE_SLAVE_DRIVER_VERSION_2 is not set
 # end of ESP-Driver:I2C Configurations
 
 #
@@ -934,6 +963,7 @@ CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y
 # CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set
 # CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set
 # CONFIG_ESP_HTTP_CLIENT_ENABLE_CUSTOM_TRANSPORT is not set
+CONFIG_ESP_HTTP_CLIENT_EVENT_POST_TIMEOUT=2000
 # end of ESP HTTP client
 
 #
@@ -946,6 +976,7 @@ CONFIG_HTTPD_PURGE_BUF_LEN=32
 # CONFIG_HTTPD_LOG_PURGE_DATA is not set
 CONFIG_HTTPD_WS_SUPPORT=y
 # CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set
+CONFIG_HTTPD_SERVER_EVENT_POST_TIMEOUT=2000
 # end of HTTP Server
 
 #
@@ -953,12 +984,14 @@ CONFIG_HTTPD_WS_SUPPORT=y
 #
 # CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set
 # CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set
+CONFIG_ESP_HTTPS_OTA_EVENT_POST_TIMEOUT=2000
 # end of ESP HTTPS OTA
 
 #
 # ESP HTTPS server
 #
 # CONFIG_ESP_HTTPS_SERVER_ENABLE is not set
+CONFIG_ESP_HTTPS_SERVER_EVENT_POST_TIMEOUT=2000
 # end of ESP HTTPS server
 
 #
@@ -1036,8 +1069,10 @@ CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y
 # GDMA Configurations
 #
 CONFIG_GDMA_CTRL_FUNC_IN_IRAM=y
-# CONFIG_GDMA_ISR_IRAM_SAFE is not set
+CONFIG_GDMA_ISR_HANDLER_IN_IRAM=y
+CONFIG_GDMA_OBJ_DRAM_SAFE=y
 # CONFIG_GDMA_ENABLE_DEBUG_LOG is not set
+# CONFIG_GDMA_ISR_IRAM_SAFE is not set
 # end of GDMA Configurations
 
 #
@@ -1051,29 +1086,28 @@ CONFIG_ESP_SPI_BUS_LOCK_ISR_FUNCS_IN_IRAM=y
 # end of Hardware Settings
 
 #
-# LCD and Touch Panel
+# ESP-Driver:LCD Controller Configurations
-#
-
-#
-# LCD Touch Drivers are maintained in the IDF Component Registry
-#
-
-#
-# LCD Peripheral Configuration
 #
 # CONFIG_LCD_ENABLE_DEBUG_LOG is not set
 # CONFIG_LCD_RGB_ISR_IRAM_SAFE is not set
 # CONFIG_LCD_RGB_RESTART_IN_VSYNC is not set
-# end of LCD Peripheral Configuration
+# end of ESP-Driver:LCD Controller Configurations
-# end of LCD and Touch Panel
+
+#
+# ESP-MM: Memory Management Configurations
+#
+# CONFIG_ESP_MM_CACHE_MSYNC_C2M_CHUNKED_OPS is not set
+# end of ESP-MM: Memory Management Configurations
 
 #
 # ESP NETIF Adapter
 #
 CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120
+# CONFIG_ESP_NETIF_PROVIDE_CUSTOM_IMPLEMENTATION is not set
 CONFIG_ESP_NETIF_TCPIP_LWIP=y
 # CONFIG_ESP_NETIF_LOOPBACK is not set
 CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y
+CONFIG_ESP_NETIF_REPORT_DATA_TRAFFIC=y
 # CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set
 # CONFIG_ESP_NETIF_L2_TAP is not set
 # CONFIG_ESP_NETIF_BRIDGE_EN is not set
@@ -1121,23 +1155,21 @@ CONFIG_SPIRAM=y
 #
 # SPI RAM config
 #
-CONFIG_SPIRAM_MODE_QUAD=y
+# CONFIG_SPIRAM_MODE_QUAD is not set
-# CONFIG_SPIRAM_MODE_OCT is not set
+CONFIG_SPIRAM_MODE_OCT=y
 CONFIG_SPIRAM_TYPE_AUTO=y
-# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
-# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
 # CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
-CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY=y
 CONFIG_SPIRAM_CLK_IO=30
 CONFIG_SPIRAM_CS_IO=26
 # CONFIG_SPIRAM_XIP_FROM_PSRAM is not set
 # CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
 # CONFIG_SPIRAM_RODATA is not set
-# CONFIG_SPIRAM_SPEED_120M is not set
 CONFIG_SPIRAM_SPEED_80M=y
 # CONFIG_SPIRAM_SPEED_40M is not set
 CONFIG_SPIRAM_SPEED=80
+# CONFIG_SPIRAM_ECC_ENABLE is not set
 CONFIG_SPIRAM_BOOT_INIT=y
+CONFIG_SPIRAM_PRE_CONFIGURE_MEMORY_PROTECTION=y
 # CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
 # CONFIG_SPIRAM_USE_MEMMAP is not set
 # CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
@@ -1157,6 +1189,11 @@ CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768
 # CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set
 # end of ESP Ringbuf
 
+#
+# ESP Security Specific
+#
+# end of ESP Security Specific
+
 #
 # ESP System Settings
 #
@@ -1405,10 +1442,21 @@ CONFIG_FATFS_TIMEOUT_MS=10000
 CONFIG_FATFS_PER_FILE_CACHE=y
 CONFIG_FATFS_ALLOC_PREFER_EXTRAM=y
 # CONFIG_FATFS_USE_FASTSEEK is not set
+CONFIG_FATFS_USE_STRFUNC_NONE=y
+# CONFIG_FATFS_USE_STRFUNC_WITHOUT_CRLF_CONV is not set
+# CONFIG_FATFS_USE_STRFUNC_WITH_CRLF_CONV is not set
 CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0
 # CONFIG_FATFS_IMMEDIATE_FSYNC is not set
 # CONFIG_FATFS_USE_LABEL is not set
 CONFIG_FATFS_LINK_LOCK=y
+# CONFIG_FATFS_USE_DYN_BUFFERS is not set
+
+#
+# File system free space calculation behavior
+#
+CONFIG_FATFS_DONT_TRUST_FREE_CLUSTER_CNT=0
+CONFIG_FATFS_DONT_TRUST_LAST_ALLOC=0
+# end of File system free space calculation behavior
 # end of FAT Filesystem support
 
 #
@@ -1430,6 +1478,7 @@ CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536
 # CONFIG_FREERTOS_USE_TICK_HOOK is not set
 CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16
 # CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set
+CONFIG_FREERTOS_USE_TIMERS=y
 CONFIG_FREERTOS_TIMER_SERVICE_TASK_NAME="Tmr Svc"
 # CONFIG_FREERTOS_TIMER_TASK_AFFINITY_CPU0 is not set
 # CONFIG_FREERTOS_TIMER_TASK_AFFINITY_CPU1 is not set
@@ -1456,6 +1505,7 @@ CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y
 CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y
 CONFIG_FREERTOS_ISR_STACKSIZE=1536
 CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y
+# CONFIG_FREERTOS_FPU_IN_ISR is not set
 CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER=y
 CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1=y
 # CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL3 is not set
@@ -1464,6 +1514,12 @@ CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER=y
 # CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set
 # end of Port
 
+#
+# Extra
+#
+CONFIG_FREERTOS_TASK_CREATE_ALLOW_EXT_MEM=y
+# end of Extra
+
 CONFIG_FREERTOS_PORT=y
 CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF
 CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y
@@ -1502,7 +1558,11 @@ CONFIG_HEAP_TRACING_OFF=y
 # end of Heap memory debugging
 
 #
-# Log output
+# Log
+#
+
+#
+# Log Level
 #
 # CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
 # CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set
@@ -1515,11 +1575,29 @@ CONFIG_LOG_DEFAULT_LEVEL=3
 # CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set
 CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE=y
 CONFIG_LOG_MAXIMUM_LEVEL=5
+
+#
+# Level Settings
+#
 # CONFIG_LOG_MASTER_LEVEL is not set
+CONFIG_LOG_DYNAMIC_LEVEL_CONTROL=y
+# CONFIG_LOG_TAG_LEVEL_IMPL_NONE is not set
+# CONFIG_LOG_TAG_LEVEL_IMPL_LINKED_LIST is not set
+CONFIG_LOG_TAG_LEVEL_IMPL_CACHE_AND_LINKED_LIST=y
+# CONFIG_LOG_TAG_LEVEL_CACHE_ARRAY is not set
+CONFIG_LOG_TAG_LEVEL_CACHE_BINARY_MIN_HEAP=y
+CONFIG_LOG_TAG_LEVEL_IMPL_CACHE_SIZE=31
+# end of Level Settings
+# end of Log Level
+
+#
+# Format
+#
 CONFIG_LOG_COLORS=y
 CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y
 # CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set
-# end of Log output
+# end of Format
+# end of Log
 
 #
 # LWIP
@@ -1558,6 +1636,8 @@ CONFIG_LWIP_ESP_MLDV6_REPORT=y
 CONFIG_LWIP_MLDV6_TMR_INTERVAL=40
 CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32
 CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y
+# CONFIG_LWIP_DHCP_DOES_ACD_CHECK is not set
+# CONFIG_LWIP_DHCP_DOES_NOT_CHECK_OFFERED_IP is not set
 # CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set
 CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y
 # CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set
@@ -1572,6 +1652,7 @@ CONFIG_LWIP_DHCPS=y
 CONFIG_LWIP_DHCPS_LEASE_UNIT=60
 CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8
 CONFIG_LWIP_DHCPS_STATIC_ENTRIES=y
+CONFIG_LWIP_DHCPS_ADD_DNS=y
 # end of DHCP server
 
 # CONFIG_LWIP_AUTOIP is not set
@@ -1630,12 +1711,12 @@ CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set
 # CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set
 CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF
+CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
+CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
 CONFIG_LWIP_IPV6_ND6_NUM_PREFIXES=5
 CONFIG_LWIP_IPV6_ND6_NUM_ROUTERS=3
 CONFIG_LWIP_IPV6_ND6_NUM_DESTINATIONS=10
 # CONFIG_LWIP_PPP_SUPPORT is not set
-CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3
-CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5
 # CONFIG_LWIP_SLIP_SUPPORT is not set
 
 #
@@ -1756,6 +1837,7 @@ CONFIG_MBEDTLS_HAVE_TIME=y
 # CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set
 # CONFIG_MBEDTLS_HAVE_TIME_DATE is not set
 CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y
+CONFIG_MBEDTLS_SHA1_C=y
 CONFIG_MBEDTLS_SHA512_C=y
 # CONFIG_MBEDTLS_SHA3_C is not set
 CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y
@@ -1811,6 +1893,8 @@ CONFIG_MBEDTLS_X509_CSR_PARSE_C=y
 # end of Certificates
 
 CONFIG_MBEDTLS_ECP_C=y
+CONFIG_MBEDTLS_PK_PARSE_EC_EXTENDED=y
+CONFIG_MBEDTLS_PK_PARSE_EC_COMPRESSED=y
 # CONFIG_MBEDTLS_DHM_C is not set
 CONFIG_MBEDTLS_ECDH_C=y
 CONFIG_MBEDTLS_ECDSA_C=y
@@ -1835,6 +1919,7 @@ CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM=y
 # CONFIG_MBEDTLS_THREADING_C is not set
 CONFIG_MBEDTLS_ERROR_STRINGS=y
 CONFIG_MBEDTLS_FS_IO=y
+# CONFIG_MBEDTLS_ALLOW_WEAK_CERTIFICATE_VERIFICATION is not set
 # end of mbedTLS
 
 #
@@ -1877,6 +1962,7 @@ CONFIG_STDATOMIC_S32C1I_SPIRAM_WORKAROUND=y
 # CONFIG_NVS_ENCRYPTION is not set
 # CONFIG_NVS_ASSERT_ERROR_CHECK is not set
 # CONFIG_NVS_LEGACY_DUP_KEYS_COMPATIBILITY is not set
+# CONFIG_NVS_ALLOCATE_CACHE_IN_SPIRAM is not set
 # end of NVS
 
 #
@@ -1945,10 +2031,10 @@ CONFIG_SPI_FLASH_HPM_AUTO=y
 CONFIG_SPI_FLASH_HPM_ON=y
 CONFIG_SPI_FLASH_HPM_DC_AUTO=y
 # CONFIG_SPI_FLASH_HPM_DC_DISABLE is not set
-CONFIG_SPI_FLASH_SUSPEND_QVL_SUPPORTED=y
 # CONFIG_SPI_FLASH_AUTO_SUSPEND is not set
 CONFIG_SPI_FLASH_SUSPEND_TSUS_VAL_US=50
 # CONFIG_SPI_FLASH_FORCE_ENABLE_XMC_C_SUSPEND is not set
+# CONFIG_SPI_FLASH_FORCE_ENABLE_C6_H2_SUSPEND is not set
 # end of Optional and Experimental Features (READ DOCS FIRST)
 # end of Main Flash configuration
 
@@ -2109,6 +2195,8 @@ CONFIG_VFS_MAX_COUNT=8
 #
 CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1
 # end of Host File System I/O (Semihosting)
+
+CONFIG_VFS_INITIALIZE_DEV_NULL=y
 # end of Virtual file system
 
 #
@@ -2296,9 +2384,9 @@ CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y
 CONFIG_LOG_BOOTLOADER_LEVEL=3
 # CONFIG_APP_ROLLBACK_ENABLE is not set
 # CONFIG_FLASH_ENCRYPTION_ENABLED is not set
-CONFIG_FLASHMODE_QIO=y
+# CONFIG_FLASHMODE_QIO is not set
 # CONFIG_FLASHMODE_QOUT is not set
-# CONFIG_FLASHMODE_DIO is not set
+CONFIG_FLASHMODE_DIO=y
 # CONFIG_FLASHMODE_DOUT is not set
 CONFIG_MONITOR_BAUD=115200
 # CONFIG_OPTIMIZATION_LEVEL_DEBUG is not set
@@ -2431,6 +2519,7 @@ CONFIG_TIMER_TASK_PRIORITY=1
 CONFIG_TIMER_TASK_STACK_DEPTH=2048
 CONFIG_TIMER_QUEUE_LENGTH=10
 # CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set
+CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY=y
 # CONFIG_HAL_ASSERTION_SILIENT is not set
 # CONFIG_L2_TO_L3_COPY is not set
 CONFIG_ESP_GRATUITOUS_ARP=y