Begin porting OpenIris from platformio to ESP-IDF, wifi works, blinking works, Preferences work, flashing etc works, configuration for xiaos works

2026-04-14 12:13:45 +02:00 · 2024-09-18 23:43:42 +02:00
commit 43a976d32d
28 changed files with 6327 additions and 0 deletions
--- a/main/openiris_main.cpp
+++ b/main/openiris_main.cpp
@@ -0,0 +1,95 @@
+/* Blink Example
+
+   This example code is in the Public Domain (or CC0 licensed, at your option.)
+
+   Unless required by applicable law or agreed to in writing, this
+   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
+   CONDITIONS OF ANY KIND, either express or implied.
+*/
+#include <stdio.h>
+#include <string>
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "driver/gpio.h"
+#include "esp_log.h"
+#include "led_strip.h"
+#include "sdkconfig.h"
+#include "usb_device_uvc.h"
+#include "esp_camera.h"
+#include "esp_log.h"
+#include "nvs_flash.h"
+
+#include <openiris_logo.hpp>
+#include <customSomething.hpp>
+#include <wifiManager.hpp>
+#include <Preferences.hpp>
+
+static const char *TAG = "example";
+
+/* Use project configuration menu (idf.py menuconfig) to choose the GPIO to blink,
+   or you can edit the following line and set a number here.
+*/
+#define BLINK_GPIO (gpio_num_t) CONFIG_BLINK_GPIO
+
+static uint8_t s_led_state = 0;
+
+static void blink_led(void)
+{
+    /* Set the GPIO level according to the state (LOW or HIGH)*/
+    gpio_set_level(BLINK_GPIO, s_led_state);
+}
+
+static void configure_led(void)
+{
+    ESP_LOGI(TAG, "Example configured to blink GPIO LED!");
+    gpio_reset_pin(BLINK_GPIO);
+    /* Set the GPIO as a push/pull output */
+    gpio_set_direction(BLINK_GPIO, GPIO_MODE_OUTPUT);
+}
+
+static void initNVSStorage()
+{
+    esp_err_t ret = nvs_flash_init();
+    if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND)
+    {
+        ESP_ERROR_CHECK(nvs_flash_erase());
+        ret = nvs_flash_init();
+    }
+    ESP_ERROR_CHECK(ret);
+}
+
+extern "C" void app_main(void)
+{
+    // porting plan:
+    // port the wifi manager first. - worky!!!
+    // get it connect to the network and setup an AP with hardcoded creds first -- connects. AP will be next
+    // port the logo - done
+    // port preferences lib -  in progress; prolly temporary
+    // then port the config - in progress
+    // then port the led manager as this will be fairly easy
+    // then port the serial manager
+    // then port the camera manager
+    // then port the streaming stuff (web and uvc)
+    // then port the async web server
+    // then port the Elegant OTA stuff
+    // then port the mdns stuff
+
+    Logo::printASCII();
+    initNVSStorage();
+
+    WiFiManager wifiManager;
+    wifiManager.Begin();
+
+    /* Configure the peripheral according to the LED type */
+    configure_led();
+
+    while (1)
+    {
+        printTheInclude();
+        ESP_LOGI(TAG, "Turning the LED on pin %d %s!", BLINK_GPIO, s_led_state == true ? "ON" : "OFF");
+        blink_led();
+        /* Toggle the LED state */
+        s_led_state = !s_led_state;
+        vTaskDelay(CONFIG_BLINK_PERIOD / portTICK_PERIOD_MS);
+    }
+}