-Add configurable PWM frequency and duty cycle for external LED control

-Reworked Kconfig menu structure for better organization

components/LEDManager/LEDManager/LEDManager.cpp

@@ -78,32 +78,35 @@ void LEDManager::setup() {
     gpio_set_direction(blink_led_pin, GPIO_MODE_OUTPUT);
     this->toggleLED(LED_OFF);
 
-#ifdef CONFIG_SUPPORTS_EXTERNAL_LED_CONTROL
+#ifdef CONFIG_LED_EXTERNAL_CONTROL
-  ESP_LOGD(LED_MANAGER_TAG, "Setting up illuminator led.");
+    ESP_LOGD(LED_MANAGER_TAG, "Setting up illuminator led.");
-  const int freq = 5000;
+    const int freq = CONFIG_LED_EXTERNAL_PWM_FREQ;
-  const auto resolution = LEDC_TIMER_8_BIT;
+    const auto resolution = LEDC_TIMER_8_BIT;
-  const int dutyCycle = 255;
+    const int dutyCycle = (CONFIG_LED_EXTERNAL_PWM_DUTY_CYCLE * 255) / 100;
 
-  ledc_timer_config_t ledc_timer = {
+    ledc_timer_config_t ledc_timer = {
-      .speed_mode = LEDC_LOW_SPEED_MODE,
+        .speed_mode = LEDC_LOW_SPEED_MODE,
-      .duty_resolution = resolution,
+        .duty_resolution = resolution,
-      .timer_num = LEDC_TIMER_0,
+        .timer_num = LEDC_TIMER_0,
-      .freq_hz = freq,
+        .freq_hz = freq,
-      .clk_cfg = LEDC_AUTO_CLK};
+        .clk_cfg = LEDC_AUTO_CLK
+    };
 
-  ESP_ERROR_CHECK(ledc_timer_config(&ledc_timer));
+    ESP_ERROR_CHECK(ledc_timer_config(&ledc_timer));
 
-  ledc_channel_config_t ledc_channel = {
+    ledc_channel_config_t ledc_channel = {
-      .gpio_num = this->illumninator_led_pin,
+        .gpio_num = this->illumninator_led_pin,
-      .speed_mode = LEDC_LOW_SPEED_MODE,
+        .speed_mode = LEDC_LOW_SPEED_MODE,
-      .channel = LEDC_CHANNEL_0,
+        .channel = LEDC_CHANNEL_0,
-      .intr_type = LEDC_INTR_DISABLE,
+        .intr_type = LEDC_INTR_DISABLE,
-      .timer_sel = LEDC_TIMER_0,
+        .timer_sel = LEDC_TIMER_0,
-      .duty = dutyCycle,
+        .duty = dutyCycle,
-      .hpoint = 0};
+        .hpoint = 0
+    };
 
-  ESP_ERROR_CHECK(ledc_channel_config(&ledc_channel));
+    ESP_ERROR_CHECK(ledc_channel_config(&ledc_channel));
 #endif
+
     ESP_LOGD(LED_MANAGER_TAG, "Done.");
 }
 

components/LEDManager/LEDManager/LEDManager.hpp

@@ -6,7 +6,7 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/queue.h"
 
-#ifdef CONFIG_SUPPORTS_EXTERNAL_LED_CONTROL
+#ifdef CONFIG_LED_EXTERNAL_CONTROL
 #include "driver/ledc.h"
 #endif
 

dependencies.lock

@@ -53,7 +53,7 @@ dependencies:
   idf:
     source:
       type: idf
-    version: 5.3.2
+    version: 5.3.3
 direct_dependencies:
 - espressif/cmake_utilities
 - espressif/esp32-camera

main/Kconfig.projbuild

@@ -1,56 +1,79 @@
-menu "OpenIris basic configuration"
+menu "ENV_Caps"
 
     orsource "$IDF_PATH/examples/common_components/env_caps/$IDF_TARGET/Kconfig.env_caps"
 
-    config BLINK_GPIO
+endmenu
-        int "Blink GPIO number"
-        range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
-        default 8
-        help
-            GPIO number (IOxx) to blink on and off the LED.
-            Some GPIOs are used for other purposes (flash connections, etc.) and cannot be used to blink.
 
-    config SUPPORTS_EXTERNAL_LED_CONTROL
+menu "OpenIris: General Configuration"
-        bool "Tick if your board supports the control of external IR leds (Project Babble)"
-        default false
-        help
-            GPIO number (IOxx) to the pin controlling the LEDs found on Babble boards.
-        
-    config LED_C_PIN
-        int "Pin number of the pin controlling the external leds (Project Babble)"
-        range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
-        default 1
-        help
-            GPIO number (IOxx) to the pin controlling the LEDs found on Babble boards.
-    
-    config BLINK_PERIOD
-        int "Blink period in ms"
-        range 10 3600000
-        default 1000
-        help
-            Define the blinking period in milliseconds.
 
     config WIRED_MODE
-        bool "WIred mode"
+        bool "Wired mode"
         default false
 
+endmenu
+
+menu "OpenIris: WiFi Configuration"
+
     config MDNS_HOSTNAME
-        string "mDNS name"
+        string "mDNS hostname"
         default "openiristracker"
 
     config WIFI_SSID
-        string "WiFi network name"
+        string "WiFi network name (SSID)"
         default ""
-    
+
     config WIFI_PASSWORD
         string "WiFi password"
         default ""
 
     config AP_WIFI_SSID
-        string "AP WiFi network name"
+        string "Access Point WiFi network name (SSID)"
         default "EyeTrackVR"
-    
+
     config AP_WIFI_PASSWORD
-        string "AP WiFi password"
+        string "Access Point WiFi password"
         default "12345678"
+
 endmenu
+
+menu "OpenIris: LED Configuration"
+
+    config LED_BLINK_GPIO
+        int "Blink GPIO number"
+        range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
+        default 8
+        help
+            GPIO number (IOxx) used to blink an onboard LED.
+            Some GPIOs are reserved for other functions (e.g. flash) and cannot be used.
+
+    config LED_EXTERNAL_GPIO
+        int "GPIO pin controlling external LEDs"
+        range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
+        default 1
+        help
+            GPIO number connected to the control line of the external IR LEDs.
+
+    config LED_EXTERNAL_CONTROL
+        bool "Board supports external IR LED control"
+        default false
+        help
+            Enable this if your board can control external IR LEDs.
+
+    config LED_EXTERNAL_PWM_FREQ
+        int "External LED PWM frequency (Hz)"
+        default 5000
+        range 1 40000
+        depends on LED_EXTERNAL_CONTROL
+        help
+            Frequency of the PWM signal driving the external IR LEDs.
+
+    config LED_EXTERNAL_PWM_DUTY_CYCLE
+        int "External LED PWM duty cycle (%)"
+        default 50
+        range 0 100
+        depends on LED_EXTERNAL_CONTROL
+        help
+            Duty cycle of the PWM signal for external IR LEDs, in percent.
+            0 means always off, 100 means always on.
+
+endmenu

main/openiris_main.cpp

@@ -25,8 +25,8 @@
 #include <UVCStream.hpp>
 #endif
 
-#define BLINK_GPIO (gpio_num_t) CONFIG_BLINK_GPIO
+#define BLINK_GPIO (gpio_num_t) CONFIG_LED_BLINK_GPIO
-#define CONFIG_LED_C_PIN_GPIO (gpio_num_t) CONFIG_LED_C_PIN
+#define CONFIG_LED_C_PIN_GPIO (gpio_num_t) CONFIG_LED_EXTERNAL_GPIO
 
 esp_timer_handle_t timerHandle;
 QueueHandle_t eventQueue = xQueueCreate(10, sizeof(SystemEvent));

sdkconfig

@@ -1,6 +1,6 @@
 #
 # Automatically generated file. DO NOT EDIT.
-# Espressif IoT Development Framework (ESP-IDF) 5.3.2 Project Configuration
+# Espressif IoT Development Framework (ESP-IDF) 5.3.3 Project Configuration
 #
 CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000
 CONFIG_SOC_MPU_REGIONS_MAX_NUM=8
@@ -64,6 +64,7 @@ CONFIG_SOC_LIGHT_SLEEP_SUPPORTED=y
 CONFIG_SOC_DEEP_SLEEP_SUPPORTED=y
 CONFIG_SOC_LP_PERIPH_SHARE_INTERRUPT=y
 CONFIG_SOC_PM_SUPPORTED=y
+CONFIG_SOC_SIMD_INSTRUCTION_SUPPORTED=y
 CONFIG_SOC_XTAL_SUPPORT_40M=y
 CONFIG_SOC_APPCPU_HAS_CLOCK_GATING_BUG=y
 CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y
@@ -101,6 +102,7 @@ CONFIG_SOC_HP_CPU_HAS_MULTIPLE_CORES=y
 CONFIG_SOC_CPU_BREAKPOINTS_NUM=2
 CONFIG_SOC_CPU_WATCHPOINTS_NUM=2
 CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE=64
+CONFIG_SOC_SIMD_PREFERRED_DATA_ALIGNMENT=16
 CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN=4096
 CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH=16
 CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US=1100
@@ -203,6 +205,7 @@ CONFIG_SOC_RTCIO_PIN_COUNT=22
 CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y
 CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y
 CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y
+CONFIG_SOC_LP_IO_CLOCK_IS_INDEPENDENT=y
 CONFIG_SOC_SDM_GROUPS=y
 CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8
 CONFIG_SOC_SDM_CLK_SUPPORT_APB=y
@@ -243,6 +246,8 @@ CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=54
 CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL=y
 CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y
 CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4
+CONFIG_SOC_LP_TIMER_BIT_WIDTH_LO=32
+CONFIG_SOC_LP_TIMER_BIT_WIDTH_HI=16
 CONFIG_SOC_TOUCH_SENSOR_VERSION=2
 CONFIG_SOC_TOUCH_SENSOR_NUM=15
 CONFIG_SOC_TOUCH_SUPPORT_SLEEP_WAKEUP=y
@@ -537,23 +542,37 @@ CONFIG_PARTITION_TABLE_MD5=y
 # end of Partition Table
 
 #
-# OpenIris basic configuration
+# ENV_Caps
 #
 CONFIG_ENV_GPIO_RANGE_MIN=0
 CONFIG_ENV_GPIO_RANGE_MAX=48
 CONFIG_ENV_GPIO_IN_RANGE_MAX=48
 CONFIG_ENV_GPIO_OUT_RANGE_MAX=48
-CONFIG_BLINK_GPIO=38
+# end of ENV_Caps
-CONFIG_SUPPORTS_EXTERNAL_LED_CONTROL=y
+
-CONFIG_LED_C_PIN=1
+#
-CONFIG_BLINK_PERIOD=1000
+# OpenIris: General Configuration
+#
 CONFIG_WIRED_MODE=y
+# end of OpenIris: General Configuration
+
+#
+# OpenIris: WiFi Configuration
+#
 CONFIG_MDNS_HOSTNAME="openiristracker"
 CONFIG_WIFI_SSID=""
 CONFIG_WIFI_PASSWORD=""
 CONFIG_AP_WIFI_SSID="EyeTrackVR"
 CONFIG_AP_WIFI_PASSWORD="12345678"
-# end of OpenIris basic configuration
+# end of OpenIris: WiFi Configuration
+
+#
+# OpenIris: LED Configuration
+#
+CONFIG_LED_BLINK_GPIO=1
+CONFIG_LED_EXTERNAL_GPIO=1
+# CONFIG_LED_EXTERNAL_CONTROL is not set
+# end of OpenIris: LED Configuration
 
 #
 # Camera sensor pinout configuration
@@ -628,7 +647,12 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
 # Bluetooth
 #
 # CONFIG_BT_ENABLED is not set
-CONFIG_BT_ALARM_MAX_NUM=50
+
+#
+# Common Options
+#
+# CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED is not set
+# end of Common Options
 # end of Bluetooth
 
 #
@@ -652,6 +676,7 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # Legacy ADC Driver Configuration
 #
 # CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_ADC_SKIP_LEGACY_CONFLICT_CHECK is not set
 
 #
 # Legacy ADC Calibration Configuration
@@ -664,42 +689,49 @@ CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y
 # Legacy MCPWM Driver Configurations
 #
 # CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_MCPWM_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy MCPWM Driver Configurations
 
 #
 # Legacy Timer Group Driver Configurations
 #
 # CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_GPTIMER_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy Timer Group Driver Configurations
 
 #
 # Legacy RMT Driver Configurations
 #
 # CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_RMT_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy RMT Driver Configurations
 
 #
 # Legacy I2S Driver Configurations
 #
 # CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_I2S_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy I2S Driver Configurations
 
 #
 # Legacy PCNT Driver Configurations
 #
 # CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_PCNT_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy PCNT Driver Configurations
 
 #
 # Legacy SDM Driver Configurations
 #
 # CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_SDM_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy SDM Driver Configurations
 
 #
 # Legacy Temperature Sensor Driver Configurations
 #
 # CONFIG_TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN is not set
+# CONFIG_TEMP_SENSOR_SKIP_LEGACY_CONFLICT_CHECK is not set
 # end of Legacy Temperature Sensor Driver Configurations
 # end of Driver Configurations
 
@@ -759,6 +791,7 @@ CONFIG_ESP_ERR_TO_NAME_LOOKUP=y
 CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM=y
 # CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set
 # CONFIG_GPTIMER_ISR_IRAM_SAFE is not set
+CONFIG_GPTIMER_OBJ_CACHE_SAFE=y
 # CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set
 # end of ESP-Driver:GPTimer Configurations
 
@@ -877,6 +910,13 @@ CONFIG_ESP_GDBSTUB_SUPPORT_TASKS=y
 CONFIG_ESP_GDBSTUB_MAX_TASKS=32
 # end of GDB Stub
 
+#
+# ESP HID
+#
+CONFIG_ESPHID_TASK_SIZE_BT=2048
+CONFIG_ESPHID_TASK_SIZE_BLE=4096
+# end of ESP HID
+
 #
 # ESP HTTP client
 #
@@ -1051,6 +1091,7 @@ CONFIG_ESP_PHY_RF_CAL_PARTIAL=y
 # CONFIG_ESP_PHY_RF_CAL_FULL is not set
 CONFIG_ESP_PHY_CALIBRATION_MODE=0
 # CONFIG_ESP_PHY_PLL_TRACK_DEBUG is not set
+# CONFIG_ESP_PHY_RECORD_USED_TIME is not set
 # end of PHY
 
 #
@@ -1251,9 +1292,9 @@ CONFIG_ESP_WIFI_ENABLED=y
 CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32
 CONFIG_ESP_WIFI_STATIC_TX_BUFFER=y
+# CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER is not set
 CONFIG_ESP_WIFI_TX_BUFFER_TYPE=0
 CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM=32
 CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER=y
 # CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUFFER is not set
 CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF=0
@@ -1263,7 +1304,6 @@ CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP_WIFI_TX_BA_WIN=6
 CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y
 CONFIG_ESP_WIFI_RX_BA_WIN=6
-# CONFIG_ESP_WIFI_AMSDU_TX_ENABLED is not set
 CONFIG_ESP_WIFI_NVS_ENABLED=y
 CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y
 # CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set
@@ -1434,7 +1474,6 @@ CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2
 CONFIG_HAL_WDT_USE_ROM_IMPL=y
 CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y
 CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y
-# CONFIG_HAL_ECDSA_GEN_SIG_CM is not set
 # end of Hardware Abstraction Layer (HAL) and Low Level (LL)
 
 #
@@ -1836,25 +1875,10 @@ CONFIG_STDATOMIC_S32C1I_SPIRAM_WORKAROUND=y
 # CONFIG_OPENTHREAD_ENABLED is not set
 
 #
-# Thread Operational Dataset
+# OpenThread Spinel
 #
-CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP"
-CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX="fd00:db8:a0:0::/64"
-CONFIG_OPENTHREAD_NETWORK_CHANNEL=15
-CONFIG_OPENTHREAD_NETWORK_PANID=0x1234
-CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe"
-CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff"
-CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53"
-# end of Thread Operational Dataset
-
-CONFIG_OPENTHREAD_XTAL_ACCURACY=130
 # CONFIG_OPENTHREAD_SPINEL_ONLY is not set
-CONFIG_OPENTHREAD_RX_ON_WHEN_IDLE=y
+# end of OpenThread Spinel
-
-#
-# Thread Address Query Config
-#
-# end of Thread Address Query Config
 # end of OpenThread
 
 #
@@ -1863,6 +1887,7 @@ CONFIG_OPENTHREAD_RX_ON_WHEN_IDLE=y
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y
 CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y
+CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_PATCH_VERSION=y
 # end of Protocomm
 
 #
@@ -2190,6 +2215,7 @@ CONFIG_OV5640_SUPPORT=y
 # CONFIG_SC101IOT_SUPPORT is not set
 # CONFIG_SC030IOT_SUPPORT is not set
 # CONFIG_SC031GS_SUPPORT is not set
+CONFIG_MEGA_CCM_SUPPORT=y
 # CONFIG_SCCB_HARDWARE_I2C_PORT0 is not set
 CONFIG_SCCB_HARDWARE_I2C_PORT1=y
 CONFIG_SCCB_CLK_FREQ=100000
@@ -2216,6 +2242,17 @@ CONFIG_MDNS_TASK_STACK_SIZE=4096
 CONFIG_MDNS_TASK_AFFINITY_CPU0=y
 # CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set
 CONFIG_MDNS_TASK_AFFINITY=0x0
+
+#
+# MDNS Memory Configuration
+#
+# CONFIG_MDNS_TASK_CREATE_FROM_SPIRAM is not set
+CONFIG_MDNS_TASK_CREATE_FROM_INTERNAL=y
+# CONFIG_MDNS_MEMORY_ALLOC_SPIRAM is not set
+CONFIG_MDNS_MEMORY_ALLOC_INTERNAL=y
+# CONFIG_MDNS_MEMORY_CUSTOM_IMPL is not set
+# end of MDNS Memory Configuration
+
 CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000
 CONFIG_MDNS_TIMER_PERIOD_MS=100
 # CONFIG_MDNS_NETWORKING_SOCKET is not set
@@ -2326,7 +2363,6 @@ CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 CONFIG_ESP32S3_DEBUG_OCDAWARE=y
 CONFIG_BROWNOUT_DET=y
 CONFIG_ESP32S3_BROWNOUT_DET=y
-CONFIG_ESP32S3_BROWNOUT_DET=y
 CONFIG_BROWNOUT_DET_LVL_SEL_7=y
 CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_7=y
 # CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set
@@ -2349,17 +2385,14 @@ CONFIG_ESP32_WIFI_ENABLED=y
 CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10
 CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y
+# CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER is not set
 CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0
 CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16
-CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32
 # CONFIG_ESP32_WIFI_CSI_ENABLED is not set
 CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y
 CONFIG_ESP32_WIFI_TX_BA_WIN=6
 CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
-CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y
 CONFIG_ESP32_WIFI_RX_BA_WIN=6
-CONFIG_ESP32_WIFI_RX_BA_WIN=6
-# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set
 CONFIG_ESP32_WIFI_NVS_ENABLED=y
 CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y
 # CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set

sdkconfig.base_defaults

@@ -551,7 +551,7 @@ CONFIG_WIFI_SSID=""
 CONFIG_WIFI_PASSWORD=""
 CONFIG_AP_WIFI_SSID="EyeTrackVR"
 CONFIG_AP_WIFI_PASSWORD="12345678"
-# CONFIG_SUPPORTS_EXTERNAL_LED_CONTROL is not set
+# CONFIG_LED_EXTERNAL_CONTROL is not set
 CONFIG_LED_C_PIN=1
 # end of OpenIris basic configuration
 

sdkconfig.board.project_babble

@@ -46,4 +46,6 @@ CONFIG_SPIRAM_CS_IO=26
 # CONFIG_SPIRAM_RODATA is not set
 # CONFIG_SPIRAM_SPEED_120M is not set
 CONFIG_SPIRAM_SPEED_80M=y
-CONFIG_SUPPORTS_EXTERNAL_LED_CONTROL=y
+CONFIG_LED_EXTERNAL_CONTROL=y
+CONFIG_LED_EXTERNAL_PWM_FREQ=5000
+CONFIG_LED_EXTERNAL_PWM_DUTY_CYCLE=100

sdkconfig.board.xiao-esp32s3

@@ -54,4 +54,4 @@ CONFIG_SPIRAM_SPEED_80M=y
 # CONFIG_SPIRAM_SPEED_120M is not set
 CONFIG_SPIRAM_SPEED=80
 CONFIG_SPIRAM_SPEED_80M=y
-# CONFIG_SUPPORTS_EXTERNAL_LED_CONTROL is not set
+# CONFIG_LED_EXTERNAL_CONTROL is not set